1 /* $NetBSD: uhareg.h,v 1.12 2005/12/11 12:21:28 christos Exp $ */ 2 3 /*- 4 * Copyright (c) 1997, 1998 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Charles M. Hannum and by Jason R. Thorpe of the Numerical Aerospace 9 * Simulation Facility, NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. All advertising materials mentioning features or use of this software 20 * must display the following acknowledgement: 21 * This product includes software developed by the NetBSD 22 * Foundation, Inc. and its contributors. 23 * 4. Neither the name of The NetBSD Foundation nor the names of its 24 * contributors may be used to endorse or promote products derived 25 * from this software without specific prior written permission. 26 * 27 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 28 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 29 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 31 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 32 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 33 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 34 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 35 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 36 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 37 * POSSIBILITY OF SUCH DAMAGE. 38 */ 39 40 /* 41 * Ported for use with the UltraStor 14f by Gary Close (gclose@wvnvms.wvnet.edu) 42 * Slight fixes to timeouts to run with the 34F 43 * Thanks to Julian Elischer for advice and help with this port. 44 * 45 * Originally written by Julian Elischer (julian@tfs.com) 46 * for TRW Financial Systems for use under the MACH(2.5) operating system. 47 * 48 * TRW Financial Systems, in accordance with their agreement with Carnegie 49 * Mellon University, makes this software available to CMU to distribute 50 * or use in any manner that they see fit as long as this message is kept with 51 * the software. For this reason TFS also grants any other persons or 52 * organisations permission to use or modify this software. 53 * 54 * TFS supplies this software to be publicly redistributed 55 * on the understanding that TFS is not responsible for the correct 56 * functioning of this software in any circumstances. 57 * 58 * commenced: Sun Sep 27 18:14:01 PDT 1992 59 * slight mod to make work with 34F as well: Wed Jun 2 18:05:48 WST 1993 60 */ 61 62 typedef u_long physaddr; 63 typedef u_long physlen; 64 65 /************************** board definitions *******************************/ 66 /* 67 * I/O Port Interface 68 */ 69 #define U14_LMASK 0x0000 /* local doorbell mask reg */ 70 #define U14_LINT 0x0001 /* local doorbell int/stat reg */ 71 #define U14_SMASK 0x0002 /* system doorbell mask reg */ 72 #define U14_SINT 0x0003 /* system doorbell int/stat reg */ 73 #define U14_ID 0x0004 /* product id reg (2 ports) */ 74 #define U14_CONFIG 0x0006 /* config reg (2 ports) */ 75 #define U14_OGMPTR 0x0008 /* outgoing mail ptr (4 ports) */ 76 #define U14_ICMPTR 0x000c /* incoming mail ptr (4 ports) */ 77 78 #define U24_CONFIG 0x0005 /* config reg (3 ports) */ 79 #define U24_LMASK 0x000c /* local doorbell mask reg */ 80 #define U24_LINT 0x000d /* local doorbell int/stat reg */ 81 #define U24_SMASK 0x000e /* system doorbell mask reg */ 82 #define U24_SINT 0x000f /* system doorbell int/stat reg */ 83 #define U24_OGMCMD 0x0016 /* outgoing commands */ 84 #define U24_OGMPTR 0x0017 /* outgoing mail ptr (4 ports) */ 85 #define U24_ICMCMD 0x001b /* incoming commands */ 86 #define U24_ICMPTR 0x001c /* incoming mail ptr (4 ports) */ 87 88 /* 89 * UHA_LMASK bits (read only) 90 */ 91 #define UHA_LDIE 0x80 /* local doorbell int enabled */ 92 #define UHA_SRSTE 0x40 /* soft reset enabled */ 93 #define UHA_ABORTEN 0x10 /* abort MSCP enabled */ 94 #define UHA_OGMINTEN 0x01 /* outgoing mail interrupt enabled */ 95 96 /* 97 * UHA_LINT bits (read only) 98 */ 99 #define U14_LDIP 0x80 /* local doorbell int pending */ 100 #define U24_LDIP 0x02 /* local doorbell int pending */ 101 102 /* 103 * UHA_LINT bits (write only) 104 */ 105 #define U14_OGMFULL 0x01 /* outgoing mailbox is full */ 106 #define U14_ABORT 0x10 /* abort MSCP */ 107 108 #define U24_OGMFULL 0x02 /* outgoing mailbox is full */ 109 110 #define UHA_SBRST 0x40 /* scsi bus reset */ 111 #define UHA_ADRST 0x80 /* adapter soft reset */ 112 #define UHA_ASRST 0xc0 /* adapter and scsi reset */ 113 114 /* 115 * UHA_SMASK bits (read/write) 116 */ 117 #define UHA_ENSINT 0x80 /* enable system doorbell interrupt */ 118 #define UHA_EN_ABORT_COMPLETE 0x10 /* enable abort MSCP complete int */ 119 #define UHA_ENICM 0x01 /* enable ICM interrupt */ 120 121 /* 122 * UHA_SINT bits (read) 123 */ 124 #define U14_SDIP 0x80 /* system doorbell int pending */ 125 #define U24_SDIP 0x02 /* system doorbell int pending */ 126 127 #define UHA_ABORT_SUCC 0x10 /* abort MSCP successful */ 128 #define UHA_ABORT_FAIL 0x18 /* abort MSCP failed */ 129 130 /* 131 * UHA_SINT bits (write) 132 */ 133 #define U14_ICM_ACK 0x01 /* acknowledge ICM and clear */ 134 #define U24_ICM_ACK 0x02 /* acknowledge ICM and clear */ 135 136 #define UHA_ABORT_ACK 0x18 /* acknowledge status and clear */ 137 138 /* 139 * U14_CONFIG bits (read only) 140 */ 141 #define U14_DMA_CH5 0x0000 /* DMA channel 5 */ 142 #define U14_DMA_CH6 0x4000 /* 6 */ 143 #define U14_DMA_CH7 0x8000 /* 7 */ 144 #define U14_DMA_MASK 0xc000 145 #define U14_IRQ15 0x0000 /* IRQ 15 */ 146 #define U14_IRQ14 0x1000 /* 14 */ 147 #define U14_IRQ11 0x2000 /* 11 */ 148 #define U14_IRQ10 0x3000 /* 10 */ 149 #define U14_IRQ_MASK 0x3000 150 #define U14_HOSTID_MASK 0x0007 151 152 /* 153 * U24_CONFIG bits (read only) 154 */ 155 #define U24_MAGIC1 0x08 156 #define U24_IRQ15 0x10 157 #define U24_IRQ14 0x20 158 #define U24_IRQ11 0x40 159 #define U24_IRQ10 0x80 160 #define U24_IRQ_MASK 0xf0 161 162 #define U24_MAGIC2 0x04 163 164 #define U24_HOSTID_MASK 0x07 165 166 /* 167 * EISA registers (offset from slot base) 168 */ 169 #define EISA_VENDOR 0x0c80 /* vendor ID (2 ports) */ 170 #define EISA_MODEL 0x0c82 /* model number (2 ports) */ 171 #define EISA_CONTROL 0x0c84 172 #define EISA_RESET 0x04 173 #define EISA_ERROR 0x02 174 #define EISA_ENABLE 0x01 175 176 /* 177 * host_stat error codes 178 */ 179 #define UHA_NO_ERR 0x00 /* No error supposedly */ 180 #define UHA_SBUS_ABORT_ERR 0x84 /* scsi bus abort error */ 181 #define UHA_SBUS_TIMEOUT 0x91 /* scsi bus selection timeout */ 182 #define UHA_SBUS_OVER_UNDER 0x92 /* scsi bus over/underrun */ 183 #define UHA_BAD_SCSI_CMD 0x96 /* illegal scsi command */ 184 #define UHA_AUTO_SENSE_ERR 0x9b /* auto request sense err */ 185 #define UHA_SBUS_RES_ERR 0xa3 /* scsi bus reset error */ 186 #define UHA_BAD_SG_LIST 0xff /* invalid scatter gath list */ 187 188 #define UHA_NSEG 33 /* number of DMA segments supported */ 189 190 struct uha_dma_seg { 191 physaddr seg_addr; 192 physlen seg_len; 193 }; 194 195 #pragma pack(1) 196 struct uha_mscp { 197 u_char opcode:3; 198 #define UHA_HAC 0x01 /* host adapter command */ 199 #define UHA_TSP 0x02 /* target scsi pass through command */ 200 #define UHA_SDR 0x04 /* scsi device reset */ 201 u_char xdir:2; /* xfer direction */ 202 #define UHA_SDET 0x00 /* determined by scsi command */ 203 #define UHA_SDIN 0x01 /* scsi data in */ 204 #define UHA_SDOUT 0x02 /* scsi data out */ 205 #define UHA_NODATA 0x03 /* no data xfer */ 206 u_char dcn:1; /* disable disconnect for this command */ 207 u_char ca:1; /* cache control */ 208 u_char sgth:1; /* scatter gather flag */ 209 u_char target:3; 210 u_char chan:2; /* scsi channel (always 0 for 14f) */ 211 u_char lun:3; 212 physaddr data_addr; 213 physlen data_length; 214 physaddr link_addr; 215 u_char link_id; 216 u_char sg_num; /* number of scat gath segs */ 217 /*in s-g list if sg flag is */ 218 /*set. starts at 1, 8bytes per */ 219 u_char req_sense_length; 220 u_char scsi_cmd_length; 221 u_char scsi_cmd[12]; 222 u_char host_stat; 223 u_char target_stat; 224 physaddr sense_ptr; /* if 0 no auto sense */ 225 226 struct uha_dma_seg uha_dma[UHA_NSEG]; 227 struct scsi_sense_data mscp_sense; 228 /*-----------------end of hardware supported fields----------------*/ 229 TAILQ_ENTRY(uha_mscp) chain; 230 struct uha_mscp *nexthash; 231 u_long hashkey; 232 struct scsipi_xfer *xs; /* the scsipi_xfer for this cmd */ 233 int flags; 234 #define MSCP_ALLOC 0x01 235 #define MSCP_ABORT 0x02 236 int timeout; 237 238 /* 239 * This DMA map maps the buffer involved in the transfer. 240 * It's contents are loaded into "uha_dma" above. 241 */ 242 bus_dmamap_t dmamap_xfer; 243 244 }; 245 #pragma pack() 246