1 /* $NetBSD: siop_common.c,v 1.36 2004/05/17 20:12:34 bouyer Exp $ */ 2 3 /* 4 * Copyright (c) 2000, 2002 Manuel Bouyer. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Manuel Bouyer. 17 * 4. The name of the author may not be used to endorse or promote products 18 * derived from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 21 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 22 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 23 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 25 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 26 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 27 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 28 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 29 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 30 * 31 */ 32 33 /* SYM53c7/8xx PCI-SCSI I/O Processors driver */ 34 35 #include <sys/cdefs.h> 36 __KERNEL_RCSID(0, "$NetBSD: siop_common.c,v 1.36 2004/05/17 20:12:34 bouyer Exp $"); 37 38 #include <sys/param.h> 39 #include <sys/systm.h> 40 #include <sys/device.h> 41 #include <sys/malloc.h> 42 #include <sys/buf.h> 43 #include <sys/kernel.h> 44 #include <sys/scsiio.h> 45 46 #include <uvm/uvm_extern.h> 47 48 #include <machine/endian.h> 49 #include <machine/bus.h> 50 51 #include <dev/scsipi/scsi_all.h> 52 #include <dev/scsipi/scsi_message.h> 53 #include <dev/scsipi/scsipi_all.h> 54 55 #include <dev/scsipi/scsiconf.h> 56 57 #include <dev/ic/siopreg.h> 58 #include <dev/ic/siopvar_common.h> 59 60 #include "opt_siop.h" 61 62 #undef DEBUG 63 #undef DEBUG_DR 64 #undef DEBUG_NEG 65 66 int 67 siop_common_attach(sc) 68 struct siop_common_softc *sc; 69 { 70 int error, i; 71 bus_dma_segment_t seg; 72 int rseg; 73 74 /* 75 * Allocate DMA-safe memory for the script and map it. 76 */ 77 if ((sc->features & SF_CHIP_RAM) == 0) { 78 error = bus_dmamem_alloc(sc->sc_dmat, PAGE_SIZE, 79 PAGE_SIZE, 0, &seg, 1, &rseg, BUS_DMA_NOWAIT); 80 if (error) { 81 aprint_error( 82 "%s: unable to allocate script DMA memory, " 83 "error = %d\n", sc->sc_dev.dv_xname, error); 84 return error; 85 } 86 error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, PAGE_SIZE, 87 (caddr_t *)&sc->sc_script, 88 BUS_DMA_NOWAIT|BUS_DMA_COHERENT); 89 if (error) { 90 aprint_error("%s: unable to map script DMA memory, " 91 "error = %d\n", sc->sc_dev.dv_xname, error); 92 return error; 93 } 94 error = bus_dmamap_create(sc->sc_dmat, PAGE_SIZE, 1, 95 PAGE_SIZE, 0, BUS_DMA_NOWAIT, &sc->sc_scriptdma); 96 if (error) { 97 aprint_error("%s: unable to create script DMA map, " 98 "error = %d\n", sc->sc_dev.dv_xname, error); 99 return error; 100 } 101 error = bus_dmamap_load(sc->sc_dmat, sc->sc_scriptdma, 102 sc->sc_script, PAGE_SIZE, NULL, BUS_DMA_NOWAIT); 103 if (error) { 104 aprint_error("%s: unable to load script DMA map, " 105 "error = %d\n", sc->sc_dev.dv_xname, error); 106 return error; 107 } 108 sc->sc_scriptaddr = 109 sc->sc_scriptdma->dm_segs[0].ds_addr; 110 sc->ram_size = PAGE_SIZE; 111 } 112 113 sc->sc_adapt.adapt_dev = &sc->sc_dev; 114 sc->sc_adapt.adapt_nchannels = 1; 115 sc->sc_adapt.adapt_openings = 0; 116 sc->sc_adapt.adapt_ioctl = siop_ioctl; 117 sc->sc_adapt.adapt_minphys = minphys; 118 119 memset(&sc->sc_chan, 0, sizeof(sc->sc_chan)); 120 sc->sc_chan.chan_adapter = &sc->sc_adapt; 121 sc->sc_chan.chan_bustype = &scsi_bustype; 122 sc->sc_chan.chan_channel = 0; 123 sc->sc_chan.chan_flags = SCSIPI_CHAN_CANGROW; 124 sc->sc_chan.chan_ntargets = 125 (sc->features & SF_BUS_WIDE) ? 16 : 8; 126 sc->sc_chan.chan_nluns = 8; 127 sc->sc_chan.chan_id = 128 bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SCID); 129 if (sc->sc_chan.chan_id == 0 || 130 sc->sc_chan.chan_id >= sc->sc_chan.chan_ntargets) 131 sc->sc_chan.chan_id = SIOP_DEFAULT_TARGET; 132 133 for (i = 0; i < 16; i++) 134 sc->targets[i] = NULL; 135 136 /* find min/max sync period for this chip */ 137 sc->st_maxsync = 0; 138 sc->dt_maxsync = 0; 139 sc->st_minsync = 255; 140 sc->dt_minsync = 255; 141 for (i = 0; i < sizeof(scf_period) / sizeof(scf_period[0]); i++) { 142 if (sc->clock_period != scf_period[i].clock) 143 continue; 144 if (sc->st_maxsync < scf_period[i].period) 145 sc->st_maxsync = scf_period[i].period; 146 if (sc->st_minsync > scf_period[i].period) 147 sc->st_minsync = scf_period[i].period; 148 } 149 if (sc->st_maxsync == 255 || sc->st_minsync == 0) 150 panic("siop: can't find my sync parameters"); 151 for (i = 0; i < sizeof(dt_scf_period) / sizeof(dt_scf_period[0]); i++) { 152 if (sc->clock_period != dt_scf_period[i].clock) 153 continue; 154 if (sc->dt_maxsync < dt_scf_period[i].period) 155 sc->dt_maxsync = dt_scf_period[i].period; 156 if (sc->dt_minsync > dt_scf_period[i].period) 157 sc->dt_minsync = dt_scf_period[i].period; 158 } 159 if (sc->dt_maxsync == 255 || sc->dt_minsync == 0) 160 panic("siop: can't find my sync parameters"); 161 return 0; 162 } 163 164 void 165 siop_common_reset(sc) 166 struct siop_common_softc *sc; 167 { 168 u_int32_t stest3; 169 170 /* reset the chip */ 171 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_ISTAT, ISTAT_SRST); 172 delay(1000); 173 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_ISTAT, 0); 174 175 /* init registers */ 176 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL0, 177 SCNTL0_ARB_MASK | SCNTL0_EPC | SCNTL0_AAP); 178 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1, 0); 179 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL3, sc->clock_div); 180 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SXFER, 0); 181 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_DIEN, 0xff); 182 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SIEN0, 183 0xff & ~(SIEN0_CMP | SIEN0_SEL | SIEN0_RSL)); 184 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SIEN1, 185 0xff & ~(SIEN1_HTH | SIEN1_GEN)); 186 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST2, 0); 187 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST3, STEST3_TE); 188 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STIME0, 189 (0xb << STIME0_SEL_SHIFT)); 190 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCID, 191 sc->sc_chan.chan_id | SCID_RRE); 192 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_RESPID0, 193 1 << sc->sc_chan.chan_id); 194 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_DCNTL, 195 (sc->features & SF_CHIP_PF) ? DCNTL_COM | DCNTL_PFEN : DCNTL_COM); 196 if (sc->features & SF_CHIP_AAIP) 197 bus_space_write_1(sc->sc_rt, sc->sc_rh, 198 SIOP_AIPCNTL1, AIPCNTL1_DIS); 199 200 /* enable clock doubler or quadruler if appropriate */ 201 if (sc->features & (SF_CHIP_DBLR | SF_CHIP_QUAD)) { 202 stest3 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_STEST3); 203 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST1, 204 STEST1_DBLEN); 205 if (sc->features & SF_CHIP_QUAD) { 206 /* wait for PPL to lock */ 207 while ((bus_space_read_1(sc->sc_rt, sc->sc_rh, 208 SIOP_STEST4) & STEST4_LOCK) == 0) 209 delay(10); 210 } else { 211 /* data sheet says 20us - more won't hurt */ 212 delay(100); 213 } 214 /* halt scsi clock, select doubler/quad, restart clock */ 215 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST3, 216 stest3 | STEST3_HSC); 217 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST1, 218 STEST1_DBLEN | STEST1_DBLSEL); 219 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST3, stest3); 220 } else { 221 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST1, 0); 222 } 223 if (sc->features & SF_CHIP_FIFO) 224 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST5, 225 bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST5) | 226 CTEST5_DFS); 227 if (sc->features & SF_CHIP_LED0) { 228 /* Set GPIO0 as output if software LED control is required */ 229 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_GPCNTL, 230 bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_GPCNTL) & 0xfe); 231 } 232 if (sc->features & SF_BUS_ULTRA3) { 233 /* reset SCNTL4 */ 234 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL4, 0); 235 } 236 sc->mode = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_STEST4) & 237 STEST4_MODE_MASK; 238 239 /* 240 * initialise the RAM. Without this we may get scsi gross errors on 241 * the 1010 242 */ 243 if (sc->features & SF_CHIP_RAM) 244 bus_space_set_region_4(sc->sc_ramt, sc->sc_ramh, 245 0, 0, sc->ram_size / 4); 246 sc->sc_reset(sc); 247 } 248 249 /* prepare tables before sending a cmd */ 250 void 251 siop_setuptables(siop_cmd) 252 struct siop_common_cmd *siop_cmd; 253 { 254 int i; 255 struct siop_common_softc *sc = siop_cmd->siop_sc; 256 struct scsipi_xfer *xs = siop_cmd->xs; 257 int target = xs->xs_periph->periph_target; 258 int lun = xs->xs_periph->periph_lun; 259 int msgoffset = 1; 260 261 siop_cmd->siop_tables->id = htole32(sc->targets[target]->id); 262 memset(siop_cmd->siop_tables->msg_out, 0, 263 sizeof(siop_cmd->siop_tables->msg_out)); 264 /* request sense doesn't disconnect */ 265 if (xs->xs_control & XS_CTL_REQSENSE) 266 siop_cmd->siop_tables->msg_out[0] = MSG_IDENTIFY(lun, 0); 267 else if ((sc->features & SF_CHIP_GEBUG) && 268 (sc->targets[target]->flags & TARF_ISWIDE) == 0) 269 /* 270 * 1010 bug: it seems that the 1010 has problems with reselect 271 * when not in wide mode (generate false SCSI gross error). 272 * The FreeBSD sym driver has comments about it but their 273 * workaround (disable SCSI gross error reporting) doesn't 274 * work with my adapter. So disable disconnect when not 275 * wide. 276 */ 277 siop_cmd->siop_tables->msg_out[0] = MSG_IDENTIFY(lun, 0); 278 else 279 siop_cmd->siop_tables->msg_out[0] = MSG_IDENTIFY(lun, 1); 280 if (xs->xs_tag_type != 0) { 281 if ((sc->targets[target]->flags & TARF_TAG) == 0) { 282 scsipi_printaddr(xs->xs_periph); 283 printf(": tagged command type %d id %d\n", 284 siop_cmd->xs->xs_tag_type, siop_cmd->xs->xs_tag_id); 285 panic("tagged command for non-tagging device"); 286 } 287 siop_cmd->flags |= CMDFL_TAG; 288 siop_cmd->siop_tables->msg_out[1] = siop_cmd->xs->xs_tag_type; 289 /* 290 * use siop_cmd->tag not xs->xs_tag_id, caller may want a 291 * different one 292 */ 293 siop_cmd->siop_tables->msg_out[2] = siop_cmd->tag; 294 msgoffset = 3; 295 } 296 siop_cmd->siop_tables->t_msgout.count= htole32(msgoffset); 297 if (sc->targets[target]->status == TARST_ASYNC) { 298 if ((sc->targets[target]->flags & TARF_DT) && 299 (sc->mode == STEST4_MODE_LVD)) { 300 sc->targets[target]->status = TARST_PPR_NEG; 301 siop_ppr_msg(siop_cmd, msgoffset, sc->dt_minsync, 302 sc->maxoff); 303 } else if (sc->targets[target]->flags & TARF_WIDE) { 304 sc->targets[target]->status = TARST_WIDE_NEG; 305 siop_wdtr_msg(siop_cmd, msgoffset, 306 MSG_EXT_WDTR_BUS_16_BIT); 307 } else if (sc->targets[target]->flags & TARF_SYNC) { 308 sc->targets[target]->status = TARST_SYNC_NEG; 309 siop_sdtr_msg(siop_cmd, msgoffset, sc->st_minsync, 310 (sc->maxoff > 31) ? 31 : sc->maxoff); 311 } else { 312 sc->targets[target]->status = TARST_OK; 313 siop_update_xfer_mode(sc, target); 314 } 315 } 316 siop_cmd->siop_tables->status = 317 htole32(SCSI_SIOP_NOSTATUS); /* set invalid status */ 318 319 siop_cmd->siop_tables->cmd.count = 320 htole32(siop_cmd->dmamap_cmd->dm_segs[0].ds_len); 321 siop_cmd->siop_tables->cmd.addr = 322 htole32(siop_cmd->dmamap_cmd->dm_segs[0].ds_addr); 323 if (xs->xs_control & (XS_CTL_DATA_IN | XS_CTL_DATA_OUT)) { 324 for (i = 0; i < siop_cmd->dmamap_data->dm_nsegs; i++) { 325 siop_cmd->siop_tables->data[i].count = 326 htole32(siop_cmd->dmamap_data->dm_segs[i].ds_len); 327 siop_cmd->siop_tables->data[i].addr = 328 htole32(siop_cmd->dmamap_data->dm_segs[i].ds_addr); 329 } 330 } 331 } 332 333 int 334 siop_wdtr_neg(siop_cmd) 335 struct siop_common_cmd *siop_cmd; 336 { 337 struct siop_common_softc *sc = siop_cmd->siop_sc; 338 struct siop_common_target *siop_target = siop_cmd->siop_target; 339 int target = siop_cmd->xs->xs_periph->periph_target; 340 struct siop_common_xfer *tables = siop_cmd->siop_tables; 341 342 if (siop_target->status == TARST_WIDE_NEG) { 343 /* we initiated wide negotiation */ 344 switch (tables->msg_in[3]) { 345 case MSG_EXT_WDTR_BUS_8_BIT: 346 siop_target->flags &= ~TARF_ISWIDE; 347 sc->targets[target]->id &= ~(SCNTL3_EWS << 24); 348 break; 349 case MSG_EXT_WDTR_BUS_16_BIT: 350 if (siop_target->flags & TARF_WIDE) { 351 siop_target->flags |= TARF_ISWIDE; 352 sc->targets[target]->id |= (SCNTL3_EWS << 24); 353 break; 354 } 355 /* FALLTHROUH */ 356 default: 357 /* 358 * hum, we got more than what we can handle, shouldn't 359 * happen. Reject, and stay async 360 */ 361 siop_target->flags &= ~TARF_ISWIDE; 362 siop_target->status = TARST_OK; 363 siop_target->offset = siop_target->period = 0; 364 siop_update_xfer_mode(sc, target); 365 printf("%s: rejecting invalid wide negotiation from " 366 "target %d (%d)\n", sc->sc_dev.dv_xname, target, 367 tables->msg_in[3]); 368 tables->t_msgout.count= htole32(1); 369 tables->msg_out[0] = MSG_MESSAGE_REJECT; 370 return SIOP_NEG_MSGOUT; 371 } 372 tables->id = htole32(sc->targets[target]->id); 373 bus_space_write_1(sc->sc_rt, sc->sc_rh, 374 SIOP_SCNTL3, 375 (sc->targets[target]->id >> 24) & 0xff); 376 /* we now need to do sync */ 377 if (siop_target->flags & TARF_SYNC) { 378 siop_target->status = TARST_SYNC_NEG; 379 siop_sdtr_msg(siop_cmd, 0, sc->st_minsync, 380 (sc->maxoff > 31) ? 31 : sc->maxoff); 381 return SIOP_NEG_MSGOUT; 382 } else { 383 siop_target->status = TARST_OK; 384 siop_update_xfer_mode(sc, target); 385 return SIOP_NEG_ACK; 386 } 387 } else { 388 /* target initiated wide negotiation */ 389 if (tables->msg_in[3] >= MSG_EXT_WDTR_BUS_16_BIT 390 && (siop_target->flags & TARF_WIDE)) { 391 siop_target->flags |= TARF_ISWIDE; 392 sc->targets[target]->id |= SCNTL3_EWS << 24; 393 } else { 394 siop_target->flags &= ~TARF_ISWIDE; 395 sc->targets[target]->id &= ~(SCNTL3_EWS << 24); 396 } 397 tables->id = htole32(sc->targets[target]->id); 398 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL3, 399 (sc->targets[target]->id >> 24) & 0xff); 400 /* 401 * we did reset wide parameters, so fall back to async, 402 * but don't schedule a sync neg, target should initiate it 403 */ 404 siop_target->status = TARST_OK; 405 siop_target->offset = siop_target->period = 0; 406 siop_update_xfer_mode(sc, target); 407 siop_wdtr_msg(siop_cmd, 0, (siop_target->flags & TARF_ISWIDE) ? 408 MSG_EXT_WDTR_BUS_16_BIT : MSG_EXT_WDTR_BUS_8_BIT); 409 return SIOP_NEG_MSGOUT; 410 } 411 } 412 413 int 414 siop_ppr_neg(siop_cmd) 415 struct siop_common_cmd *siop_cmd; 416 { 417 struct siop_common_softc *sc = siop_cmd->siop_sc; 418 struct siop_common_target *siop_target = siop_cmd->siop_target; 419 int target = siop_cmd->xs->xs_periph->periph_target; 420 struct siop_common_xfer *tables = siop_cmd->siop_tables; 421 int sync, offset, options, scf = 0; 422 int i; 423 424 #ifdef DEBUG_NEG 425 printf("%s: anserw on ppr negotiation:", sc->sc_dev.dv_xname); 426 for (i = 0; i < 8; i++) 427 printf(" 0x%x", tables->msg_in[i]); 428 printf("\n"); 429 #endif 430 431 if (siop_target->status == TARST_PPR_NEG) { 432 /* we initiated PPR negotiation */ 433 sync = tables->msg_in[3]; 434 offset = tables->msg_in[5]; 435 options = tables->msg_in[7]; 436 if (options != MSG_EXT_PPR_DT) { 437 /* should't happen */ 438 printf("%s: ppr negotiation for target %d: " 439 "no DT option\n", sc->sc_dev.dv_xname, target); 440 siop_target->status = TARST_ASYNC; 441 siop_target->flags &= ~(TARF_DT | TARF_ISDT); 442 siop_target->offset = 0; 443 siop_target->period = 0; 444 goto reject; 445 } 446 447 if (offset > sc->maxoff || sync < sc->dt_minsync || 448 sync > sc->dt_maxsync) { 449 printf("%s: ppr negotiation for target %d: " 450 "offset (%d) or sync (%d) out of range\n", 451 sc->sc_dev.dv_xname, target, offset, sync); 452 /* should not happen */ 453 siop_target->offset = 0; 454 siop_target->period = 0; 455 goto reject; 456 } else { 457 for (i = 0; i < 458 sizeof(dt_scf_period) / sizeof(dt_scf_period[0]); 459 i++) { 460 if (sc->clock_period != dt_scf_period[i].clock) 461 continue; 462 if (dt_scf_period[i].period == sync) { 463 /* ok, found it. we now are sync. */ 464 siop_target->offset = offset; 465 siop_target->period = sync; 466 scf = dt_scf_period[i].scf; 467 siop_target->flags |= TARF_ISDT; 468 } 469 } 470 if ((siop_target->flags & TARF_ISDT) == 0) { 471 printf("%s: ppr negotiation for target %d: " 472 "sync (%d) incompatible with adapter\n", 473 sc->sc_dev.dv_xname, target, sync); 474 /* 475 * we didn't find it in our table, do async 476 * send reject msg, start SDTR/WDTR neg 477 */ 478 siop_target->status = TARST_ASYNC; 479 siop_target->flags &= ~(TARF_DT | TARF_ISDT); 480 siop_target->offset = 0; 481 siop_target->period = 0; 482 goto reject; 483 } 484 } 485 if (tables->msg_in[6] != 1) { 486 printf("%s: ppr negotiation for target %d: " 487 "transfer width (%d) incompatible with dt\n", 488 sc->sc_dev.dv_xname, target, tables->msg_in[6]); 489 /* DT mode can only be done with wide transfers */ 490 siop_target->status = TARST_ASYNC; 491 goto reject; 492 } 493 siop_target->flags |= TARF_ISWIDE; 494 sc->targets[target]->id |= (SCNTL3_EWS << 24); 495 sc->targets[target]->id &= ~(SCNTL3_SCF_MASK << 24); 496 sc->targets[target]->id |= scf << (24 + SCNTL3_SCF_SHIFT); 497 sc->targets[target]->id &= ~(SXFER_MO_MASK << 8); 498 sc->targets[target]->id |= 499 (siop_target->offset & SXFER_MO_MASK) << 8; 500 sc->targets[target]->id &= ~0xff; 501 sc->targets[target]->id |= SCNTL4_U3EN; 502 siop_target->status = TARST_OK; 503 siop_update_xfer_mode(sc, target); 504 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL3, 505 (sc->targets[target]->id >> 24) & 0xff); 506 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SXFER, 507 (sc->targets[target]->id >> 8) & 0xff); 508 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL4, 509 sc->targets[target]->id & 0xff); 510 return SIOP_NEG_ACK; 511 } else { 512 /* target initiated PPR negotiation, shouldn't happen */ 513 printf("%s: rejecting invalid PPR negotiation from " 514 "target %d\n", sc->sc_dev.dv_xname, target); 515 reject: 516 tables->t_msgout.count= htole32(1); 517 tables->msg_out[0] = MSG_MESSAGE_REJECT; 518 return SIOP_NEG_MSGOUT; 519 } 520 } 521 522 int 523 siop_sdtr_neg(siop_cmd) 524 struct siop_common_cmd *siop_cmd; 525 { 526 struct siop_common_softc *sc = siop_cmd->siop_sc; 527 struct siop_common_target *siop_target = siop_cmd->siop_target; 528 int target = siop_cmd->xs->xs_periph->periph_target; 529 int sync, maxoffset, offset, i; 530 int send_msgout = 0; 531 struct siop_common_xfer *tables = siop_cmd->siop_tables; 532 533 /* limit to Ultra/2 parameters, need PPR for Ultra/3 */ 534 maxoffset = (sc->maxoff > 31) ? 31 : sc->maxoff; 535 536 sync = tables->msg_in[3]; 537 offset = tables->msg_in[4]; 538 539 if (siop_target->status == TARST_SYNC_NEG) { 540 /* we initiated sync negotiation */ 541 siop_target->status = TARST_OK; 542 #ifdef DEBUG 543 printf("sdtr: sync %d offset %d\n", sync, offset); 544 #endif 545 if (offset > maxoffset || sync < sc->st_minsync || 546 sync > sc->st_maxsync) 547 goto reject; 548 for (i = 0; i < sizeof(scf_period) / sizeof(scf_period[0]); 549 i++) { 550 if (sc->clock_period != scf_period[i].clock) 551 continue; 552 if (scf_period[i].period == sync) { 553 /* ok, found it. we now are sync. */ 554 siop_target->offset = offset; 555 siop_target->period = sync; 556 sc->targets[target]->id &= 557 ~(SCNTL3_SCF_MASK << 24); 558 sc->targets[target]->id |= scf_period[i].scf 559 << (24 + SCNTL3_SCF_SHIFT); 560 if (sync < 25 && /* Ultra */ 561 (sc->features & SF_BUS_ULTRA3) == 0) 562 sc->targets[target]->id |= 563 SCNTL3_ULTRA << 24; 564 else 565 sc->targets[target]->id &= 566 ~(SCNTL3_ULTRA << 24); 567 sc->targets[target]->id &= 568 ~(SXFER_MO_MASK << 8); 569 sc->targets[target]->id |= 570 (offset & SXFER_MO_MASK) << 8; 571 sc->targets[target]->id &= ~0xff; /* scntl4 */ 572 goto end; 573 } 574 } 575 /* 576 * we didn't find it in our table, do async and send reject 577 * msg 578 */ 579 reject: 580 send_msgout = 1; 581 tables->t_msgout.count= htole32(1); 582 tables->msg_out[0] = MSG_MESSAGE_REJECT; 583 sc->targets[target]->id &= ~(SCNTL3_SCF_MASK << 24); 584 sc->targets[target]->id &= ~(SCNTL3_ULTRA << 24); 585 sc->targets[target]->id &= ~(SXFER_MO_MASK << 8); 586 sc->targets[target]->id &= ~0xff; /* scntl4 */ 587 siop_target->offset = siop_target->period = 0; 588 } else { /* target initiated sync neg */ 589 #ifdef DEBUG 590 printf("sdtr (target): sync %d offset %d\n", sync, offset); 591 #endif 592 if (offset == 0 || sync > sc->st_maxsync) { /* async */ 593 goto async; 594 } 595 if (offset > maxoffset) 596 offset = maxoffset; 597 if (sync < sc->st_minsync) 598 sync = sc->st_minsync; 599 /* look for sync period */ 600 for (i = 0; i < sizeof(scf_period) / sizeof(scf_period[0]); 601 i++) { 602 if (sc->clock_period != scf_period[i].clock) 603 continue; 604 if (scf_period[i].period == sync) { 605 /* ok, found it. we now are sync. */ 606 siop_target->offset = offset; 607 siop_target->period = sync; 608 sc->targets[target]->id &= 609 ~(SCNTL3_SCF_MASK << 24); 610 sc->targets[target]->id |= scf_period[i].scf 611 << (24 + SCNTL3_SCF_SHIFT); 612 if (sync < 25 && /* Ultra */ 613 (sc->features & SF_BUS_ULTRA3) == 0) 614 sc->targets[target]->id |= 615 SCNTL3_ULTRA << 24; 616 else 617 sc->targets[target]->id &= 618 ~(SCNTL3_ULTRA << 24); 619 sc->targets[target]->id &= 620 ~(SXFER_MO_MASK << 8); 621 sc->targets[target]->id |= 622 (offset & SXFER_MO_MASK) << 8; 623 sc->targets[target]->id &= ~0xff; /* scntl4 */ 624 siop_sdtr_msg(siop_cmd, 0, sync, offset); 625 send_msgout = 1; 626 goto end; 627 } 628 } 629 async: 630 siop_target->offset = siop_target->period = 0; 631 sc->targets[target]->id &= ~(SCNTL3_SCF_MASK << 24); 632 sc->targets[target]->id &= ~(SCNTL3_ULTRA << 24); 633 sc->targets[target]->id &= ~(SXFER_MO_MASK << 8); 634 sc->targets[target]->id &= ~0xff; /* scntl4 */ 635 siop_sdtr_msg(siop_cmd, 0, 0, 0); 636 send_msgout = 1; 637 } 638 end: 639 if (siop_target->status == TARST_OK) 640 siop_update_xfer_mode(sc, target); 641 #ifdef DEBUG 642 printf("id now 0x%x\n", sc->targets[target]->id); 643 #endif 644 tables->id = htole32(sc->targets[target]->id); 645 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL3, 646 (sc->targets[target]->id >> 24) & 0xff); 647 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SXFER, 648 (sc->targets[target]->id >> 8) & 0xff); 649 if (send_msgout) { 650 return SIOP_NEG_MSGOUT; 651 } else { 652 return SIOP_NEG_ACK; 653 } 654 } 655 656 void 657 siop_sdtr_msg(siop_cmd, offset, ssync, soff) 658 struct siop_common_cmd *siop_cmd; 659 int offset; 660 int ssync, soff; 661 { 662 siop_cmd->siop_tables->msg_out[offset + 0] = MSG_EXTENDED; 663 siop_cmd->siop_tables->msg_out[offset + 1] = MSG_EXT_SDTR_LEN; 664 siop_cmd->siop_tables->msg_out[offset + 2] = MSG_EXT_SDTR; 665 siop_cmd->siop_tables->msg_out[offset + 3] = ssync; 666 siop_cmd->siop_tables->msg_out[offset + 4] = soff; 667 siop_cmd->siop_tables->t_msgout.count = 668 htole32(offset + MSG_EXT_SDTR_LEN + 2); 669 } 670 671 void 672 siop_wdtr_msg(siop_cmd, offset, wide) 673 struct siop_common_cmd *siop_cmd; 674 int offset; 675 { 676 siop_cmd->siop_tables->msg_out[offset + 0] = MSG_EXTENDED; 677 siop_cmd->siop_tables->msg_out[offset + 1] = MSG_EXT_WDTR_LEN; 678 siop_cmd->siop_tables->msg_out[offset + 2] = MSG_EXT_WDTR; 679 siop_cmd->siop_tables->msg_out[offset + 3] = wide; 680 siop_cmd->siop_tables->t_msgout.count = 681 htole32(offset + MSG_EXT_WDTR_LEN + 2); 682 } 683 684 void 685 siop_ppr_msg(siop_cmd, offset, ssync, soff) 686 struct siop_common_cmd *siop_cmd; 687 int offset; 688 int ssync, soff; 689 { 690 siop_cmd->siop_tables->msg_out[offset + 0] = MSG_EXTENDED; 691 siop_cmd->siop_tables->msg_out[offset + 1] = MSG_EXT_PPR_LEN; 692 siop_cmd->siop_tables->msg_out[offset + 2] = MSG_EXT_PPR; 693 siop_cmd->siop_tables->msg_out[offset + 3] = ssync; 694 siop_cmd->siop_tables->msg_out[offset + 4] = 0; /* reserved */ 695 siop_cmd->siop_tables->msg_out[offset + 5] = soff; 696 siop_cmd->siop_tables->msg_out[offset + 6] = 1; /* wide */ 697 siop_cmd->siop_tables->msg_out[offset + 7] = MSG_EXT_PPR_DT; 698 siop_cmd->siop_tables->t_msgout.count = 699 htole32(offset + MSG_EXT_PPR_LEN + 2); 700 } 701 702 void 703 siop_minphys(bp) 704 struct buf *bp; 705 { 706 minphys(bp); 707 } 708 709 int 710 siop_ioctl(chan, cmd, arg, flag, p) 711 struct scsipi_channel *chan; 712 u_long cmd; 713 caddr_t arg; 714 int flag; 715 struct proc *p; 716 { 717 struct siop_common_softc *sc = (void *)chan->chan_adapter->adapt_dev; 718 719 switch (cmd) { 720 case SCBUSIORESET: 721 /* 722 * abort the script. This will trigger an interrupt, which will 723 * trigger a bus reset. 724 * We can't safely trigger the reset here as we can't access 725 * the required register while the script is running. 726 */ 727 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_ISTAT, ISTAT_ABRT); 728 return (0); 729 default: 730 return (ENOTTY); 731 } 732 } 733 734 void 735 siop_ma(siop_cmd) 736 struct siop_common_cmd *siop_cmd; 737 { 738 int offset, dbc, sstat; 739 struct siop_common_softc *sc = siop_cmd->siop_sc; 740 scr_table_t *table; /* table with partial xfer */ 741 742 /* 743 * compute how much of the current table didn't get handled when 744 * a phase mismatch occurs 745 */ 746 if ((siop_cmd->xs->xs_control & (XS_CTL_DATA_OUT | XS_CTL_DATA_IN)) 747 == 0) 748 return; /* no valid data transfer */ 749 750 offset = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SCRATCHA + 1); 751 if (offset >= SIOP_NSG) { 752 printf("%s: bad offset in siop_sdp (%d)\n", 753 sc->sc_dev.dv_xname, offset); 754 return; 755 } 756 table = &siop_cmd->siop_tables->data[offset]; 757 #ifdef DEBUG_DR 758 printf("siop_ma: offset %d count=%d addr=0x%x ", offset, 759 table->count, table->addr); 760 #endif 761 dbc = bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DBC) & 0x00ffffff; 762 if (siop_cmd->xs->xs_control & XS_CTL_DATA_OUT) { 763 if (sc->features & SF_CHIP_DFBC) { 764 dbc += 765 bus_space_read_2(sc->sc_rt, sc->sc_rh, SIOP_DFBC); 766 } else { 767 /* need to account stale data in FIFO */ 768 int dfifo = 769 bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_DFIFO); 770 if (sc->features & SF_CHIP_FIFO) { 771 dfifo |= (bus_space_read_1(sc->sc_rt, sc->sc_rh, 772 SIOP_CTEST5) & CTEST5_BOMASK) << 8; 773 dbc += (dfifo - (dbc & 0x3ff)) & 0x3ff; 774 } else { 775 dbc += (dfifo - (dbc & 0x7f)) & 0x7f; 776 } 777 } 778 sstat = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SSTAT0); 779 if (sstat & SSTAT0_OLF) 780 dbc++; 781 if ((sstat & SSTAT0_ORF) && (sc->features & SF_CHIP_DFBC) == 0) 782 dbc++; 783 if (siop_cmd->siop_target->flags & TARF_ISWIDE) { 784 sstat = bus_space_read_1(sc->sc_rt, sc->sc_rh, 785 SIOP_SSTAT2); 786 if (sstat & SSTAT2_OLF1) 787 dbc++; 788 if ((sstat & SSTAT2_ORF1) && 789 (sc->features & SF_CHIP_DFBC) == 0) 790 dbc++; 791 } 792 /* clear the FIFO */ 793 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3, 794 bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3) | 795 CTEST3_CLF); 796 } 797 siop_cmd->flags |= CMDFL_RESID; 798 siop_cmd->resid = dbc; 799 } 800 801 void 802 siop_sdp(siop_cmd, offset) 803 struct siop_common_cmd *siop_cmd; 804 int offset; 805 { 806 scr_table_t *table; 807 808 if ((siop_cmd->xs->xs_control & (XS_CTL_DATA_OUT | XS_CTL_DATA_IN)) 809 == 0) 810 return; /* no data pointers to save */ 811 812 /* 813 * offset == SIOP_NSG may be a valid condition if we get a Save data 814 * pointer when the xfer is done. Just ignore the Save data pointer 815 * in this case 816 */ 817 if (offset == SIOP_NSG) 818 return; 819 #ifdef DIAGNOSTIC 820 if (offset > SIOP_NSG) { 821 scsipi_printaddr(siop_cmd->xs->xs_periph); 822 printf(": offset %d > %d\n", offset, SIOP_NSG); 823 panic("siop_sdp: offset"); 824 } 825 #endif 826 /* 827 * Save data pointer. We do this by adjusting the tables to point 828 * at the begginning of the data not yet transfered. 829 * offset points to the first table with untransfered data. 830 */ 831 832 /* 833 * before doing that we decrease resid from the ammount of data which 834 * has been transfered. 835 */ 836 siop_update_resid(siop_cmd, offset); 837 838 /* 839 * First let see if we have a resid from a phase mismatch. If so, 840 * we have to adjst the table at offset to remove transfered data. 841 */ 842 if (siop_cmd->flags & CMDFL_RESID) { 843 siop_cmd->flags &= ~CMDFL_RESID; 844 table = &siop_cmd->siop_tables->data[offset]; 845 /* "cut" already transfered data from this table */ 846 table->addr = 847 htole32(le32toh(table->addr) + 848 le32toh(table->count) - siop_cmd->resid); 849 table->count = htole32(siop_cmd->resid); 850 } 851 852 /* 853 * now we can remove entries which have been transfered. 854 * We just move the entries with data left at the beggining of the 855 * tables 856 */ 857 memmove(&siop_cmd->siop_tables->data[0], 858 &siop_cmd->siop_tables->data[offset], 859 (SIOP_NSG - offset) * sizeof(scr_table_t)); 860 } 861 862 void 863 siop_update_resid(siop_cmd, offset) 864 struct siop_common_cmd *siop_cmd; 865 int offset; 866 { 867 scr_table_t *table; 868 int i; 869 870 if ((siop_cmd->xs->xs_control & (XS_CTL_DATA_OUT | XS_CTL_DATA_IN)) 871 == 0) 872 return; /* no data to transfer */ 873 874 /* 875 * update resid. First account for the table entries which have 876 * been fully completed. 877 */ 878 for (i = 0; i < offset; i++) 879 siop_cmd->xs->resid -= 880 le32toh(siop_cmd->siop_tables->data[i].count); 881 /* 882 * if CMDFL_RESID is set, the last table (pointed by offset) is a 883 * partial transfers. If not, offset points to the entry folloing 884 * the last full transfer. 885 */ 886 if (siop_cmd->flags & CMDFL_RESID) { 887 table = &siop_cmd->siop_tables->data[offset]; 888 siop_cmd->xs->resid -= le32toh(table->count) - siop_cmd->resid; 889 } 890 } 891 892 int 893 siop_iwr(siop_cmd) 894 struct siop_common_cmd *siop_cmd; 895 { 896 int offset; 897 scr_table_t *table; /* table with IWR */ 898 struct siop_common_softc *sc = siop_cmd->siop_sc; 899 /* handle ignore wide residue messages */ 900 901 /* if target isn't wide, reject */ 902 if ((siop_cmd->siop_target->flags & TARF_ISWIDE) == 0) { 903 siop_cmd->siop_tables->t_msgout.count= htole32(1); 904 siop_cmd->siop_tables->msg_out[0] = MSG_MESSAGE_REJECT; 905 return SIOP_NEG_MSGOUT; 906 } 907 /* get index of current command in table */ 908 offset = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SCRATCHA + 1); 909 /* 910 * if the current table did complete, we're now pointing at the 911 * next one. Go back one if we didn't see a phase mismatch. 912 */ 913 if ((siop_cmd->flags & CMDFL_RESID) == 0) 914 offset--; 915 table = &siop_cmd->siop_tables->data[offset]; 916 917 if ((siop_cmd->flags & CMDFL_RESID) == 0) { 918 if (le32toh(table->count) & 1) { 919 /* we really got the number of bytes we expected */ 920 return SIOP_NEG_ACK; 921 } else { 922 /* 923 * now we really had a short xfer, by one byte. 924 * handle it just as if we had a phase mistmatch 925 * (there is a resid of one for this table). 926 * Update scratcha1 to reflect the fact that 927 * this xfer isn't complete. 928 */ 929 siop_cmd->flags |= CMDFL_RESID; 930 siop_cmd->resid = 1; 931 bus_space_write_1(sc->sc_rt, sc->sc_rh, 932 SIOP_SCRATCHA + 1, offset); 933 return SIOP_NEG_ACK; 934 } 935 } else { 936 /* 937 * we already have a short xfer for this table; it's 938 * just one byte less than we though it was 939 */ 940 siop_cmd->resid--; 941 return SIOP_NEG_ACK; 942 } 943 } 944 945 void 946 siop_clearfifo(sc) 947 struct siop_common_softc *sc; 948 { 949 int timeout = 0; 950 int ctest3 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3); 951 952 #ifdef DEBUG_INTR 953 printf("DMA fifo not empty !\n"); 954 #endif 955 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3, 956 ctest3 | CTEST3_CLF); 957 while ((bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3) & 958 CTEST3_CLF) != 0) { 959 delay(1); 960 if (++timeout > 1000) { 961 printf("clear fifo failed\n"); 962 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3, 963 bus_space_read_1(sc->sc_rt, sc->sc_rh, 964 SIOP_CTEST3) & ~CTEST3_CLF); 965 return; 966 } 967 } 968 } 969 970 int 971 siop_modechange(sc) 972 struct siop_common_softc *sc; 973 { 974 int retry; 975 int sist0, sist1, stest2; 976 for (retry = 0; retry < 5; retry++) { 977 /* 978 * datasheet says to wait 100ms and re-read SIST1, 979 * to check that DIFFSENSE is stable. 980 * We may delay() 5 times for 100ms at interrupt time; 981 * hopefully this will not happen often. 982 */ 983 delay(100000); 984 sist0 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SIST0); 985 sist1 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SIST1); 986 if (sist1 & SIEN1_SBMC) 987 continue; /* we got an irq again */ 988 sc->mode = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_STEST4) & 989 STEST4_MODE_MASK; 990 stest2 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_STEST2); 991 switch(sc->mode) { 992 case STEST4_MODE_DIF: 993 printf("%s: switching to differential mode\n", 994 sc->sc_dev.dv_xname); 995 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST2, 996 stest2 | STEST2_DIF); 997 break; 998 case STEST4_MODE_SE: 999 printf("%s: switching to single-ended mode\n", 1000 sc->sc_dev.dv_xname); 1001 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST2, 1002 stest2 & ~STEST2_DIF); 1003 break; 1004 case STEST4_MODE_LVD: 1005 printf("%s: switching to LVD mode\n", 1006 sc->sc_dev.dv_xname); 1007 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST2, 1008 stest2 & ~STEST2_DIF); 1009 break; 1010 default: 1011 printf("%s: invalid SCSI mode 0x%x\n", 1012 sc->sc_dev.dv_xname, sc->mode); 1013 return 0; 1014 } 1015 return 1; 1016 } 1017 printf("%s: timeout waiting for DIFFSENSE to stabilise\n", 1018 sc->sc_dev.dv_xname); 1019 return 0; 1020 } 1021 1022 void 1023 siop_resetbus(sc) 1024 struct siop_common_softc *sc; 1025 { 1026 int scntl1; 1027 scntl1 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1); 1028 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1, 1029 scntl1 | SCNTL1_RST); 1030 /* minimum 25 us, more time won't hurt */ 1031 delay(100); 1032 bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1, scntl1); 1033 } 1034 1035 void 1036 siop_update_xfer_mode(sc, target) 1037 struct siop_common_softc *sc; 1038 int target; 1039 { 1040 struct siop_common_target *siop_target = sc->targets[target]; 1041 struct scsipi_xfer_mode xm; 1042 1043 xm.xm_target = target; 1044 xm.xm_mode = 0; 1045 xm.xm_period = 0; 1046 xm.xm_offset = 0; 1047 1048 1049 if (siop_target->flags & TARF_ISWIDE) 1050 xm.xm_mode |= PERIPH_CAP_WIDE16; 1051 if (siop_target->period) { 1052 xm.xm_period = siop_target->period; 1053 xm.xm_offset = siop_target->offset; 1054 xm.xm_mode |= PERIPH_CAP_SYNC; 1055 } 1056 if (siop_target->flags & TARF_TAG) { 1057 /* 1010 workaround: can't do disconnect if not wide, so can't do tag */ 1058 if ((sc->features & SF_CHIP_GEBUG) == 0 || 1059 (sc->targets[target]->flags & TARF_ISWIDE)) 1060 xm.xm_mode |= PERIPH_CAP_TQING; 1061 } 1062 1063 scsipi_async_event(&sc->sc_chan, ASYNC_EVENT_XFER_MODE, &xm); 1064 } 1065