1 /* $NetBSD: sgec.c,v 1.34 2007/10/19 12:00:00 ad Exp $ */ 2 /* 3 * Copyright (c) 1999 Ludd, University of Lule}, Sweden. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed at Ludd, University of 16 * Lule}, Sweden and its contributors. 17 * 4. The name of the author may not be used to endorse or promote products 18 * derived from this software without specific prior written permission 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 21 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 22 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 23 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 25 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 26 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 27 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 28 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 29 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * Driver for the SGEC (Second Generation Ethernet Controller), sitting 34 * on for example the VAX 4000/300 (KA670). 35 * 36 * The SGEC looks like a mixture of the DEQNA and the TULIP. Fun toy. 37 * 38 * Even though the chip is capable to use virtual addresses (read the 39 * System Page Table directly) this driver doesn't do so, and there 40 * is no benefit in doing it either in NetBSD of today. 41 * 42 * Things that is still to do: 43 * Collect statistics. 44 * Use imperfect filtering when many multicast addresses. 45 */ 46 47 #include <sys/cdefs.h> 48 __KERNEL_RCSID(0, "$NetBSD: sgec.c,v 1.34 2007/10/19 12:00:00 ad Exp $"); 49 50 #include "opt_inet.h" 51 #include "bpfilter.h" 52 53 #include <sys/param.h> 54 #include <sys/mbuf.h> 55 #include <sys/socket.h> 56 #include <sys/device.h> 57 #include <sys/systm.h> 58 #include <sys/sockio.h> 59 60 #include <uvm/uvm_extern.h> 61 62 #include <net/if.h> 63 #include <net/if_ether.h> 64 #include <net/if_dl.h> 65 66 #include <netinet/in.h> 67 #include <netinet/if_inarp.h> 68 69 #if NBPFILTER > 0 70 #include <net/bpf.h> 71 #include <net/bpfdesc.h> 72 #endif 73 74 #include <sys/bus.h> 75 76 #include <dev/ic/sgecreg.h> 77 #include <dev/ic/sgecvar.h> 78 79 static void zeinit(struct ze_softc *); 80 static void zestart(struct ifnet *); 81 static int zeioctl(struct ifnet *, u_long, void *); 82 static int ze_add_rxbuf(struct ze_softc *, int); 83 static void ze_setup(struct ze_softc *); 84 static void zetimeout(struct ifnet *); 85 static int zereset(struct ze_softc *); 86 87 #define ZE_WCSR(csr, val) \ 88 bus_space_write_4(sc->sc_iot, sc->sc_ioh, csr, val) 89 #define ZE_RCSR(csr) \ 90 bus_space_read_4(sc->sc_iot, sc->sc_ioh, csr) 91 92 /* 93 * Interface exists: make available by filling in network interface 94 * record. System will initialize the interface when it is ready 95 * to accept packets. 96 */ 97 void 98 sgec_attach(sc) 99 struct ze_softc *sc; 100 { 101 struct ifnet *ifp = (struct ifnet *)&sc->sc_if; 102 struct ze_tdes *tp; 103 struct ze_rdes *rp; 104 bus_dma_segment_t seg; 105 int i, rseg, error; 106 107 /* 108 * Allocate DMA safe memory for descriptors and setup memory. 109 */ 110 if ((error = bus_dmamem_alloc(sc->sc_dmat, 111 sizeof(struct ze_cdata), PAGE_SIZE, 0, &seg, 1, &rseg, 112 BUS_DMA_NOWAIT)) != 0) { 113 printf(": unable to allocate control data, error = %d\n", 114 error); 115 goto fail_0; 116 } 117 118 if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, 119 sizeof(struct ze_cdata), (void **)&sc->sc_zedata, 120 BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) { 121 printf(": unable to map control data, error = %d\n", error); 122 goto fail_1; 123 } 124 125 if ((error = bus_dmamap_create(sc->sc_dmat, 126 sizeof(struct ze_cdata), 1, 127 sizeof(struct ze_cdata), 0, BUS_DMA_NOWAIT, 128 &sc->sc_cmap)) != 0) { 129 printf(": unable to create control data DMA map, error = %d\n", 130 error); 131 goto fail_2; 132 } 133 134 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cmap, 135 sc->sc_zedata, sizeof(struct ze_cdata), NULL, 136 BUS_DMA_NOWAIT)) != 0) { 137 printf(": unable to load control data DMA map, error = %d\n", 138 error); 139 goto fail_3; 140 } 141 142 /* 143 * Zero the newly allocated memory. 144 */ 145 memset(sc->sc_zedata, 0, sizeof(struct ze_cdata)); 146 /* 147 * Create the transmit descriptor DMA maps. 148 */ 149 for (i = 0; i < TXDESCS; i++) { 150 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 151 TXDESCS - 1, MCLBYTES, 0, BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW, 152 &sc->sc_xmtmap[i]))) { 153 printf(": unable to create tx DMA map %d, error = %d\n", 154 i, error); 155 goto fail_4; 156 } 157 } 158 159 /* 160 * Create receive buffer DMA maps. 161 */ 162 for (i = 0; i < RXDESCS; i++) { 163 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, 164 MCLBYTES, 0, BUS_DMA_NOWAIT, 165 &sc->sc_rcvmap[i]))) { 166 printf(": unable to create rx DMA map %d, error = %d\n", 167 i, error); 168 goto fail_5; 169 } 170 } 171 /* 172 * Pre-allocate the receive buffers. 173 */ 174 for (i = 0; i < RXDESCS; i++) { 175 if ((error = ze_add_rxbuf(sc, i)) != 0) { 176 printf(": unable to allocate or map rx buffer %d\n," 177 " error = %d\n", i, error); 178 goto fail_6; 179 } 180 } 181 182 /* For vmstat -i 183 */ 184 evcnt_attach_dynamic(&sc->sc_intrcnt, EVCNT_TYPE_INTR, NULL, 185 sc->sc_dev.dv_xname, "intr"); 186 evcnt_attach_dynamic(&sc->sc_rxintrcnt, EVCNT_TYPE_INTR, 187 &sc->sc_intrcnt, sc->sc_dev.dv_xname, "rx intr"); 188 evcnt_attach_dynamic(&sc->sc_txintrcnt, EVCNT_TYPE_INTR, 189 &sc->sc_intrcnt, sc->sc_dev.dv_xname, "tx intr"); 190 evcnt_attach_dynamic(&sc->sc_txdraincnt, EVCNT_TYPE_INTR, 191 &sc->sc_intrcnt, sc->sc_dev.dv_xname, "tx drain"); 192 evcnt_attach_dynamic(&sc->sc_nobufintrcnt, EVCNT_TYPE_INTR, 193 &sc->sc_intrcnt, sc->sc_dev.dv_xname, "nobuf intr"); 194 evcnt_attach_dynamic(&sc->sc_nointrcnt, EVCNT_TYPE_INTR, 195 &sc->sc_intrcnt, sc->sc_dev.dv_xname, "no intr"); 196 197 /* 198 * Create ring loops of the buffer chains. 199 * This is only done once. 200 */ 201 sc->sc_pzedata = (struct ze_cdata *)sc->sc_cmap->dm_segs[0].ds_addr; 202 203 rp = sc->sc_zedata->zc_recv; 204 rp[RXDESCS].ze_framelen = ZE_FRAMELEN_OW; 205 rp[RXDESCS].ze_rdes1 = ZE_RDES1_CA; 206 rp[RXDESCS].ze_bufaddr = (char *)sc->sc_pzedata->zc_recv; 207 208 tp = sc->sc_zedata->zc_xmit; 209 tp[TXDESCS].ze_tdr = ZE_TDR_OW; 210 tp[TXDESCS].ze_tdes1 = ZE_TDES1_CA; 211 tp[TXDESCS].ze_bufaddr = (char *)sc->sc_pzedata->zc_xmit; 212 213 if (zereset(sc)) 214 return; 215 216 strcpy(ifp->if_xname, sc->sc_dev.dv_xname); 217 ifp->if_softc = sc; 218 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 219 ifp->if_start = zestart; 220 ifp->if_ioctl = zeioctl; 221 ifp->if_watchdog = zetimeout; 222 IFQ_SET_READY(&ifp->if_snd); 223 224 /* 225 * Attach the interface. 226 */ 227 if_attach(ifp); 228 ether_ifattach(ifp, sc->sc_enaddr); 229 230 printf("\n%s: hardware address %s\n", sc->sc_dev.dv_xname, 231 ether_sprintf(sc->sc_enaddr)); 232 return; 233 234 /* 235 * Free any resources we've allocated during the failed attach 236 * attempt. Do this in reverse order and fall through. 237 */ 238 fail_6: 239 for (i = 0; i < RXDESCS; i++) { 240 if (sc->sc_rxmbuf[i] != NULL) { 241 bus_dmamap_unload(sc->sc_dmat, sc->sc_xmtmap[i]); 242 m_freem(sc->sc_rxmbuf[i]); 243 } 244 } 245 fail_5: 246 for (i = 0; i < RXDESCS; i++) { 247 if (sc->sc_xmtmap[i] != NULL) 248 bus_dmamap_destroy(sc->sc_dmat, sc->sc_xmtmap[i]); 249 } 250 fail_4: 251 for (i = 0; i < TXDESCS; i++) { 252 if (sc->sc_rcvmap[i] != NULL) 253 bus_dmamap_destroy(sc->sc_dmat, sc->sc_rcvmap[i]); 254 } 255 bus_dmamap_unload(sc->sc_dmat, sc->sc_cmap); 256 fail_3: 257 bus_dmamap_destroy(sc->sc_dmat, sc->sc_cmap); 258 fail_2: 259 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_zedata, 260 sizeof(struct ze_cdata)); 261 fail_1: 262 bus_dmamem_free(sc->sc_dmat, &seg, rseg); 263 fail_0: 264 return; 265 } 266 267 /* 268 * Initialization of interface. 269 */ 270 void 271 zeinit(sc) 272 struct ze_softc *sc; 273 { 274 struct ifnet *ifp = (struct ifnet *)&sc->sc_if; 275 struct ze_cdata *zc = sc->sc_zedata; 276 int i; 277 278 /* 279 * Reset the interface. 280 */ 281 if (zereset(sc)) 282 return; 283 284 sc->sc_nexttx = sc->sc_inq = sc->sc_lastack = sc->sc_txcnt = 0; 285 /* 286 * Release and init transmit descriptors. 287 */ 288 for (i = 0; i < TXDESCS; i++) { 289 if (sc->sc_xmtmap[i]->dm_nsegs > 0) 290 bus_dmamap_unload(sc->sc_dmat, sc->sc_xmtmap[i]); 291 if (sc->sc_txmbuf[i]) { 292 m_freem(sc->sc_txmbuf[i]); 293 sc->sc_txmbuf[i] = 0; 294 } 295 zc->zc_xmit[i].ze_tdr = 0; /* Clear valid bit */ 296 } 297 298 299 /* 300 * Init receive descriptors. 301 */ 302 for (i = 0; i < RXDESCS; i++) 303 zc->zc_recv[i].ze_framelen = ZE_FRAMELEN_OW; 304 sc->sc_nextrx = 0; 305 306 ZE_WCSR(ZE_CSR6, ZE_NICSR6_IE|ZE_NICSR6_BL_8|ZE_NICSR6_ST| 307 ZE_NICSR6_SR|ZE_NICSR6_DC); 308 309 ifp->if_flags |= IFF_RUNNING; 310 ifp->if_flags &= ~IFF_OACTIVE; 311 312 /* 313 * Send a setup frame. 314 * This will start the transmit machinery as well. 315 */ 316 ze_setup(sc); 317 318 } 319 320 /* 321 * Start output on interface. 322 */ 323 void 324 zestart(ifp) 325 struct ifnet *ifp; 326 { 327 struct ze_softc *sc = ifp->if_softc; 328 struct ze_cdata *zc = sc->sc_zedata; 329 paddr_t buffer; 330 struct mbuf *m; 331 int nexttx, starttx; 332 int len, i, totlen, error; 333 int old_inq = sc->sc_inq; 334 uint16_t orword, tdr; 335 bus_dmamap_t map; 336 337 while (sc->sc_inq < (TXDESCS - 1)) { 338 339 if (sc->sc_setup) { 340 ze_setup(sc); 341 continue; 342 } 343 nexttx = sc->sc_nexttx; 344 IFQ_POLL(&sc->sc_if.if_snd, m); 345 if (m == 0) 346 goto out; 347 /* 348 * Count number of mbufs in chain. 349 * Always do DMA directly from mbufs, therefore the transmit 350 * ring is really big. 351 */ 352 map = sc->sc_xmtmap[nexttx]; 353 error = bus_dmamap_load_mbuf(sc->sc_dmat, map, m, 354 BUS_DMA_WRITE); 355 if (error) { 356 printf("zestart: load_mbuf failed: %d", error); 357 goto out; 358 } 359 360 if (map->dm_nsegs >= TXDESCS) 361 panic("zestart"); /* XXX */ 362 363 if ((map->dm_nsegs + sc->sc_inq) >= (TXDESCS - 1)) { 364 bus_dmamap_unload(sc->sc_dmat, map); 365 ifp->if_flags |= IFF_OACTIVE; 366 goto out; 367 } 368 369 /* 370 * m now points to a mbuf chain that can be loaded. 371 * Loop around and set it. 372 */ 373 totlen = 0; 374 orword = ZE_TDES1_FS; 375 starttx = nexttx; 376 for (i = 0; i < map->dm_nsegs; i++) { 377 buffer = map->dm_segs[i].ds_addr; 378 len = map->dm_segs[i].ds_len; 379 380 KASSERT(len > 0); 381 382 totlen += len; 383 /* Word alignment calc */ 384 if (totlen == m->m_pkthdr.len) { 385 sc->sc_txcnt += map->dm_nsegs; 386 if (sc->sc_txcnt >= TXDESCS * 3 / 4) { 387 orword |= ZE_TDES1_IC; 388 sc->sc_txcnt = 0; 389 } 390 orword |= ZE_TDES1_LS; 391 sc->sc_txmbuf[nexttx] = m; 392 } 393 zc->zc_xmit[nexttx].ze_bufsize = len; 394 zc->zc_xmit[nexttx].ze_bufaddr = (char *)buffer; 395 zc->zc_xmit[nexttx].ze_tdes1 = orword; 396 zc->zc_xmit[nexttx].ze_tdr = tdr; 397 398 if (++nexttx == TXDESCS) 399 nexttx = 0; 400 orword = 0; 401 tdr = ZE_TDR_OW; 402 } 403 404 sc->sc_inq += map->dm_nsegs; 405 406 IFQ_DEQUEUE(&ifp->if_snd, m); 407 #ifdef DIAGNOSTIC 408 if (totlen != m->m_pkthdr.len) 409 panic("zestart: len fault"); 410 #endif 411 /* 412 * Turn ownership of the packet over to the device. 413 */ 414 zc->zc_xmit[starttx].ze_tdr = ZE_TDR_OW; 415 416 /* 417 * Kick off the transmit logic, if it is stopped. 418 */ 419 if ((ZE_RCSR(ZE_CSR5) & ZE_NICSR5_TS) != ZE_NICSR5_TS_RUN) 420 ZE_WCSR(ZE_CSR1, -1); 421 sc->sc_nexttx = nexttx; 422 } 423 if (sc->sc_inq == (TXDESCS - 1)) 424 ifp->if_flags |= IFF_OACTIVE; 425 426 out: if (old_inq < sc->sc_inq) 427 ifp->if_timer = 5; /* If transmit logic dies */ 428 } 429 430 int 431 sgec_intr(sc) 432 struct ze_softc *sc; 433 { 434 struct ze_cdata *zc = sc->sc_zedata; 435 struct ifnet *ifp = &sc->sc_if; 436 struct mbuf *m; 437 int csr, len; 438 439 csr = ZE_RCSR(ZE_CSR5); 440 if ((csr & ZE_NICSR5_IS) == 0) { /* Wasn't we */ 441 sc->sc_nointrcnt.ev_count++; 442 return 0; 443 } 444 ZE_WCSR(ZE_CSR5, csr); 445 446 if (csr & ZE_NICSR5_RU) 447 sc->sc_nobufintrcnt.ev_count++; 448 449 if (csr & ZE_NICSR5_RI) { 450 sc->sc_rxintrcnt.ev_count++; 451 while ((zc->zc_recv[sc->sc_nextrx].ze_framelen & 452 ZE_FRAMELEN_OW) == 0) { 453 454 ifp->if_ipackets++; 455 m = sc->sc_rxmbuf[sc->sc_nextrx]; 456 len = zc->zc_recv[sc->sc_nextrx].ze_framelen; 457 ze_add_rxbuf(sc, sc->sc_nextrx); 458 if (++sc->sc_nextrx == RXDESCS) 459 sc->sc_nextrx = 0; 460 if (len < ETHER_MIN_LEN) { 461 ifp->if_ierrors++; 462 m_freem(m); 463 } else { 464 m->m_pkthdr.rcvif = ifp; 465 m->m_pkthdr.len = m->m_len = 466 len - ETHER_CRC_LEN; 467 #if NBPFILTER > 0 468 if (ifp->if_bpf) 469 bpf_mtap(ifp->if_bpf, m); 470 #endif 471 (*ifp->if_input)(ifp, m); 472 } 473 } 474 } 475 476 if (csr & ZE_NICSR5_TI) 477 sc->sc_txintrcnt.ev_count++; 478 if (sc->sc_lastack != sc->sc_nexttx) { 479 int lastack; 480 for (lastack = sc->sc_lastack; lastack != sc->sc_nexttx; ) { 481 bus_dmamap_t map; 482 int nlastack; 483 484 if ((zc->zc_xmit[lastack].ze_tdr & ZE_TDR_OW) != 0) 485 break; 486 487 if ((zc->zc_xmit[lastack].ze_tdes1 & ZE_TDES1_DT) == 488 ZE_TDES1_DT_SETUP) { 489 if (++lastack == TXDESCS) 490 lastack = 0; 491 sc->sc_inq--; 492 continue; 493 } 494 495 KASSERT(zc->zc_xmit[lastack].ze_tdes1 & ZE_TDES1_FS); 496 map = sc->sc_xmtmap[lastack]; 497 KASSERT(map->dm_nsegs > 0); 498 nlastack = (lastack + map->dm_nsegs - 1) % TXDESCS; 499 if (zc->zc_xmit[nlastack].ze_tdr & ZE_TDR_OW) 500 break; 501 lastack = nlastack; 502 if (sc->sc_txcnt > map->dm_nsegs) 503 sc->sc_txcnt -= map->dm_nsegs; 504 else 505 sc->sc_txcnt = 0; 506 sc->sc_inq -= map->dm_nsegs; 507 KASSERT(zc->zc_xmit[lastack].ze_tdes1 & ZE_TDES1_LS); 508 ifp->if_opackets++; 509 bus_dmamap_unload(sc->sc_dmat, map); 510 KASSERT(sc->sc_txmbuf[lastack]); 511 #if NBPFILTER > 0 512 if (ifp->if_bpf) 513 bpf_mtap(ifp->if_bpf, sc->sc_txmbuf[lastack]); 514 #endif 515 m_freem(sc->sc_txmbuf[lastack]); 516 sc->sc_txmbuf[lastack] = 0; 517 if (++lastack == TXDESCS) 518 lastack = 0; 519 } 520 if (lastack != sc->sc_lastack) { 521 sc->sc_txdraincnt.ev_count++; 522 sc->sc_lastack = lastack; 523 if (sc->sc_inq == 0) 524 ifp->if_timer = 0; 525 ifp->if_flags &= ~IFF_OACTIVE; 526 zestart(ifp); /* Put in more in queue */ 527 } 528 } 529 return 1; 530 } 531 532 /* 533 * Process an ioctl request. 534 */ 535 int 536 zeioctl(ifp, cmd, data) 537 struct ifnet *ifp; 538 u_long cmd; 539 void *data; 540 { 541 struct ze_softc *sc = ifp->if_softc; 542 struct ifaddr *ifa = (struct ifaddr *)data; 543 int s = splnet(), error = 0; 544 545 switch (cmd) { 546 547 case SIOCSIFADDR: 548 ifp->if_flags |= IFF_UP; 549 switch(ifa->ifa_addr->sa_family) { 550 #ifdef INET 551 case AF_INET: 552 zeinit(sc); 553 arp_ifinit(ifp, ifa); 554 break; 555 #endif 556 } 557 break; 558 559 case SIOCSIFFLAGS: 560 if ((ifp->if_flags & IFF_UP) == 0 && 561 (ifp->if_flags & IFF_RUNNING) != 0) { 562 /* 563 * If interface is marked down and it is running, 564 * stop it. (by disabling receive mechanism). 565 */ 566 ZE_WCSR(ZE_CSR6, ZE_RCSR(ZE_CSR6) & 567 ~(ZE_NICSR6_ST|ZE_NICSR6_SR)); 568 ifp->if_flags &= ~IFF_RUNNING; 569 } else if ((ifp->if_flags & IFF_UP) != 0 && 570 (ifp->if_flags & IFF_RUNNING) == 0) { 571 /* 572 * If interface it marked up and it is stopped, then 573 * start it. 574 */ 575 zeinit(sc); 576 } else if ((ifp->if_flags & IFF_UP) != 0) { 577 /* 578 * Send a new setup packet to match any new changes. 579 * (Like IFF_PROMISC etc) 580 */ 581 ze_setup(sc); 582 } 583 break; 584 585 case SIOCADDMULTI: 586 case SIOCDELMULTI: 587 /* 588 * Update our multicast list. 589 */ 590 if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) { 591 /* 592 * Multicast list has changed; set the hardware filter 593 * accordingly. 594 */ 595 if (ifp->if_flags & IFF_RUNNING) 596 ze_setup(sc); 597 error = 0; 598 } 599 break; 600 601 default: 602 error = EINVAL; 603 604 } 605 splx(s); 606 return (error); 607 } 608 609 /* 610 * Add a receive buffer to the indicated descriptor. 611 */ 612 int 613 ze_add_rxbuf(sc, i) 614 struct ze_softc *sc; 615 int i; 616 { 617 struct mbuf *m; 618 struct ze_rdes *rp; 619 int error; 620 621 MGETHDR(m, M_DONTWAIT, MT_DATA); 622 if (m == NULL) 623 return (ENOBUFS); 624 625 MCLAIM(m, &sc->sc_ec.ec_rx_mowner); 626 MCLGET(m, M_DONTWAIT); 627 if ((m->m_flags & M_EXT) == 0) { 628 m_freem(m); 629 return (ENOBUFS); 630 } 631 632 if (sc->sc_rxmbuf[i] != NULL) 633 bus_dmamap_unload(sc->sc_dmat, sc->sc_rcvmap[i]); 634 635 error = bus_dmamap_load(sc->sc_dmat, sc->sc_rcvmap[i], 636 m->m_ext.ext_buf, m->m_ext.ext_size, NULL, 637 BUS_DMA_READ|BUS_DMA_NOWAIT); 638 if (error) 639 panic("%s: can't load rx DMA map %d, error = %d", 640 sc->sc_dev.dv_xname, i, error); 641 sc->sc_rxmbuf[i] = m; 642 643 bus_dmamap_sync(sc->sc_dmat, sc->sc_rcvmap[i], 0, 644 sc->sc_rcvmap[i]->dm_mapsize, BUS_DMASYNC_PREREAD); 645 646 /* 647 * We know that the mbuf cluster is page aligned. Also, be sure 648 * that the IP header will be longword aligned. 649 */ 650 m->m_data += 2; 651 rp = &sc->sc_zedata->zc_recv[i]; 652 rp->ze_bufsize = (m->m_ext.ext_size - 2); 653 rp->ze_bufaddr = (char *)sc->sc_rcvmap[i]->dm_segs[0].ds_addr + 2; 654 rp->ze_framelen = ZE_FRAMELEN_OW; 655 656 return (0); 657 } 658 659 /* 660 * Create a setup packet and put in queue for sending. 661 */ 662 void 663 ze_setup(sc) 664 struct ze_softc *sc; 665 { 666 struct ether_multi *enm; 667 struct ether_multistep step; 668 struct ze_cdata *zc = sc->sc_zedata; 669 struct ifnet *ifp = &sc->sc_if; 670 const u_int8_t *enaddr = CLLADDR(ifp->if_sadl); 671 int j, idx, reg; 672 673 if (sc->sc_inq == (TXDESCS - 1)) { 674 sc->sc_setup = 1; 675 return; 676 } 677 sc->sc_setup = 0; 678 /* 679 * Init the setup packet with valid info. 680 */ 681 memset(zc->zc_setup, 0xff, sizeof(zc->zc_setup)); /* Broadcast */ 682 memcpy(zc->zc_setup, enaddr, ETHER_ADDR_LEN); 683 684 /* 685 * Multicast handling. The SGEC can handle up to 16 direct 686 * ethernet addresses. 687 */ 688 j = 16; 689 ifp->if_flags &= ~IFF_ALLMULTI; 690 ETHER_FIRST_MULTI(step, &sc->sc_ec, enm); 691 while (enm != NULL) { 692 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, 6)) { 693 ifp->if_flags |= IFF_ALLMULTI; 694 break; 695 } 696 memcpy(&zc->zc_setup[j], enm->enm_addrlo, ETHER_ADDR_LEN); 697 j += 8; 698 ETHER_NEXT_MULTI(step, enm); 699 if ((enm != NULL)&& (j == 128)) { 700 ifp->if_flags |= IFF_ALLMULTI; 701 break; 702 } 703 } 704 705 /* 706 * ALLMULTI implies PROMISC in this driver. 707 */ 708 if (ifp->if_flags & IFF_ALLMULTI) 709 ifp->if_flags |= IFF_PROMISC; 710 else if (ifp->if_pcount == 0) 711 ifp->if_flags &= ~IFF_PROMISC; 712 713 /* 714 * Fiddle with the receive logic. 715 */ 716 reg = ZE_RCSR(ZE_CSR6); 717 DELAY(10); 718 ZE_WCSR(ZE_CSR6, reg & ~ZE_NICSR6_SR); /* Stop rx */ 719 reg &= ~ZE_NICSR6_AF; 720 if (ifp->if_flags & IFF_PROMISC) 721 reg |= ZE_NICSR6_AF_PROM; 722 else if (ifp->if_flags & IFF_ALLMULTI) 723 reg |= ZE_NICSR6_AF_ALLM; 724 DELAY(10); 725 ZE_WCSR(ZE_CSR6, reg); 726 /* 727 * Only send a setup packet if needed. 728 */ 729 if ((ifp->if_flags & (IFF_PROMISC|IFF_ALLMULTI)) == 0) { 730 idx = sc->sc_nexttx; 731 zc->zc_xmit[idx].ze_tdes1 = ZE_TDES1_DT_SETUP; 732 zc->zc_xmit[idx].ze_bufsize = 128; 733 zc->zc_xmit[idx].ze_bufaddr = sc->sc_pzedata->zc_setup; 734 zc->zc_xmit[idx].ze_tdr = ZE_TDR_OW; 735 736 if ((ZE_RCSR(ZE_CSR5) & ZE_NICSR5_TS) != ZE_NICSR5_TS_RUN) 737 ZE_WCSR(ZE_CSR1, -1); 738 739 sc->sc_inq++; 740 if (++sc->sc_nexttx == TXDESCS) 741 sc->sc_nexttx = 0; 742 } 743 } 744 745 /* 746 * Check for dead transmit logic. 747 */ 748 void 749 zetimeout(ifp) 750 struct ifnet *ifp; 751 { 752 struct ze_softc *sc = ifp->if_softc; 753 754 if (sc->sc_inq == 0) 755 return; 756 757 printf("%s: xmit logic died, resetting...\n", sc->sc_dev.dv_xname); 758 /* 759 * Do a reset of interface, to get it going again. 760 * Will it work by just restart the transmit logic? 761 */ 762 zeinit(sc); 763 } 764 765 /* 766 * Reset chip: 767 * Set/reset the reset flag. 768 * Write interrupt vector. 769 * Write ring buffer addresses. 770 * Write SBR. 771 */ 772 int 773 zereset(sc) 774 struct ze_softc *sc; 775 { 776 int reg, i; 777 778 ZE_WCSR(ZE_CSR6, ZE_NICSR6_RE); 779 DELAY(50000); 780 if (ZE_RCSR(ZE_CSR6) & ZE_NICSR5_SF) { 781 printf("%s: selftest failed\n", sc->sc_dev.dv_xname); 782 return 1; 783 } 784 785 /* 786 * Get the vector that were set at match time, and remember it. 787 * WHICH VECTOR TO USE? Take one unused. XXX 788 * Funny way to set vector described in the programmers manual. 789 */ 790 reg = ZE_NICSR0_IPL14 | sc->sc_intvec | 0x1fff0003; /* SYNC/ASYNC??? */ 791 i = 10; 792 do { 793 if (i-- == 0) { 794 printf("Failing SGEC CSR0 init\n"); 795 return 1; 796 } 797 ZE_WCSR(ZE_CSR0, reg); 798 } while (ZE_RCSR(ZE_CSR0) != reg); 799 800 ZE_WCSR(ZE_CSR3, (vaddr_t)sc->sc_pzedata->zc_recv); 801 ZE_WCSR(ZE_CSR4, (vaddr_t)sc->sc_pzedata->zc_xmit); 802 return 0; 803 } 804