1 /* $NetBSD: rt2661.c,v 1.26 2009/09/05 14:19:30 tsutsui Exp $ */ 2 /* $OpenBSD: rt2661.c,v 1.17 2006/05/01 08:41:11 damien Exp $ */ 3 /* $FreeBSD: rt2560.c,v 1.5 2006/06/02 19:59:31 csjp Exp $ */ 4 5 /*- 6 * Copyright (c) 2006 7 * Damien Bergamini <damien.bergamini@free.fr> 8 * 9 * Permission to use, copy, modify, and distribute this software for any 10 * purpose with or without fee is hereby granted, provided that the above 11 * copyright notice and this permission notice appear in all copies. 12 * 13 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 14 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 15 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 16 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 17 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 18 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 19 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 20 */ 21 22 /*- 23 * Ralink Technology RT2561, RT2561S and RT2661 chipset driver 24 * http://www.ralinktech.com/ 25 */ 26 27 #include <sys/cdefs.h> 28 __KERNEL_RCSID(0, "$NetBSD: rt2661.c,v 1.26 2009/09/05 14:19:30 tsutsui Exp $"); 29 30 #include "bpfilter.h" 31 32 #include <sys/param.h> 33 #include <sys/sockio.h> 34 #include <sys/sysctl.h> 35 #include <sys/mbuf.h> 36 #include <sys/kernel.h> 37 #include <sys/socket.h> 38 #include <sys/systm.h> 39 #include <sys/malloc.h> 40 #include <sys/callout.h> 41 #include <sys/conf.h> 42 #include <sys/device.h> 43 44 #include <sys/bus.h> 45 #include <machine/endian.h> 46 #include <sys/intr.h> 47 48 #if NBPFILTER > 0 49 #include <net/bpf.h> 50 #endif 51 #include <net/if.h> 52 #include <net/if_arp.h> 53 #include <net/if_dl.h> 54 #include <net/if_media.h> 55 #include <net/if_types.h> 56 #include <net/if_ether.h> 57 58 #include <netinet/in.h> 59 #include <netinet/in_systm.h> 60 #include <netinet/in_var.h> 61 #include <netinet/ip.h> 62 63 #include <net80211/ieee80211_var.h> 64 #include <net80211/ieee80211_amrr.h> 65 #include <net80211/ieee80211_radiotap.h> 66 67 #include <dev/ic/rt2661reg.h> 68 #include <dev/ic/rt2661var.h> 69 70 #include <dev/pci/pcireg.h> 71 #include <dev/pci/pcivar.h> 72 #include <dev/pci/pcidevs.h> 73 74 #include <dev/firmload.h> 75 76 #ifdef RAL_DEBUG 77 #define DPRINTF(x) do { if (rt2661_debug > 0) printf x; } while (0) 78 #define DPRINTFN(n, x) do { if (rt2661_debug >= (n)) printf x; } while (0) 79 int rt2661_debug = 0; 80 #else 81 #define DPRINTF(x) 82 #define DPRINTFN(n, x) 83 #endif 84 85 static int rt2661_alloc_tx_ring(struct rt2661_softc *, 86 struct rt2661_tx_ring *, int); 87 static void rt2661_reset_tx_ring(struct rt2661_softc *, 88 struct rt2661_tx_ring *); 89 static void rt2661_free_tx_ring(struct rt2661_softc *, 90 struct rt2661_tx_ring *); 91 static int rt2661_alloc_rx_ring(struct rt2661_softc *, 92 struct rt2661_rx_ring *, int); 93 static void rt2661_reset_rx_ring(struct rt2661_softc *, 94 struct rt2661_rx_ring *); 95 static void rt2661_free_rx_ring(struct rt2661_softc *, 96 struct rt2661_rx_ring *); 97 static struct ieee80211_node * 98 rt2661_node_alloc(struct ieee80211_node_table *); 99 static int rt2661_media_change(struct ifnet *); 100 static void rt2661_next_scan(void *); 101 static void rt2661_iter_func(void *, struct ieee80211_node *); 102 static void rt2661_updatestats(void *); 103 static void rt2661_newassoc(struct ieee80211_node *, int); 104 static int rt2661_newstate(struct ieee80211com *, enum ieee80211_state, 105 int); 106 static uint16_t rt2661_eeprom_read(struct rt2661_softc *, uint8_t); 107 static void rt2661_tx_intr(struct rt2661_softc *); 108 static void rt2661_tx_dma_intr(struct rt2661_softc *, 109 struct rt2661_tx_ring *); 110 static void rt2661_rx_intr(struct rt2661_softc *); 111 static void rt2661_mcu_beacon_expire(struct rt2661_softc *); 112 static void rt2661_mcu_wakeup(struct rt2661_softc *); 113 static void rt2661_mcu_cmd_intr(struct rt2661_softc *); 114 int rt2661_intr(void *); 115 #if NBPFILTER > 0 116 static uint8_t rt2661_rxrate(struct rt2661_rx_desc *); 117 #endif 118 static int rt2661_ack_rate(struct ieee80211com *, int); 119 static uint16_t rt2661_txtime(int, int, uint32_t); 120 static uint8_t rt2661_plcp_signal(int); 121 static void rt2661_setup_tx_desc(struct rt2661_softc *, 122 struct rt2661_tx_desc *, uint32_t, uint16_t, int, int, 123 const bus_dma_segment_t *, int, int); 124 static int rt2661_tx_mgt(struct rt2661_softc *, struct mbuf *, 125 struct ieee80211_node *); 126 static struct mbuf * 127 rt2661_get_rts(struct rt2661_softc *, 128 struct ieee80211_frame *, uint16_t); 129 static int rt2661_tx_data(struct rt2661_softc *, struct mbuf *, 130 struct ieee80211_node *, int); 131 static void rt2661_start(struct ifnet *); 132 static void rt2661_watchdog(struct ifnet *); 133 static int rt2661_reset(struct ifnet *); 134 static int rt2661_ioctl(struct ifnet *, u_long, void *); 135 static void rt2661_bbp_write(struct rt2661_softc *, uint8_t, uint8_t); 136 static uint8_t rt2661_bbp_read(struct rt2661_softc *, uint8_t); 137 static void rt2661_rf_write(struct rt2661_softc *, uint8_t, uint32_t); 138 static int rt2661_tx_cmd(struct rt2661_softc *, uint8_t, uint16_t); 139 static void rt2661_select_antenna(struct rt2661_softc *); 140 static void rt2661_enable_mrr(struct rt2661_softc *); 141 static void rt2661_set_txpreamble(struct rt2661_softc *); 142 static void rt2661_set_basicrates(struct rt2661_softc *, 143 const struct ieee80211_rateset *); 144 static void rt2661_select_band(struct rt2661_softc *, 145 struct ieee80211_channel *); 146 static void rt2661_set_chan(struct rt2661_softc *, 147 struct ieee80211_channel *); 148 static void rt2661_set_bssid(struct rt2661_softc *, const uint8_t *); 149 static void rt2661_set_macaddr(struct rt2661_softc *, const uint8_t *); 150 static void rt2661_update_promisc(struct rt2661_softc *); 151 #if 0 152 static int rt2661_wme_update(struct ieee80211com *); 153 #endif 154 155 static void rt2661_updateslot(struct ifnet *); 156 static void rt2661_set_slottime(struct rt2661_softc *); 157 static const char * 158 rt2661_get_rf(int); 159 static void rt2661_read_eeprom(struct rt2661_softc *); 160 static int rt2661_bbp_init(struct rt2661_softc *); 161 static int rt2661_init(struct ifnet *); 162 static void rt2661_stop(struct ifnet *, int); 163 static int rt2661_load_microcode(struct rt2661_softc *, const uint8_t *, 164 int); 165 static void rt2661_rx_tune(struct rt2661_softc *); 166 #ifdef notyet 167 static void rt2661_radar_start(struct rt2661_softc *); 168 static int rt2661_radar_stop(struct rt2661_softc *); 169 #endif 170 static int rt2661_prepare_beacon(struct rt2661_softc *); 171 static void rt2661_enable_tsf_sync(struct rt2661_softc *); 172 static int rt2661_get_rssi(struct rt2661_softc *, uint8_t); 173 174 /* 175 * Supported rates for 802.11a/b/g modes (in 500Kbps unit). 176 */ 177 static const struct ieee80211_rateset rt2661_rateset_11a = 178 { 8, { 12, 18, 24, 36, 48, 72, 96, 108 } }; 179 180 static const struct ieee80211_rateset rt2661_rateset_11b = 181 { 4, { 2, 4, 11, 22 } }; 182 183 static const struct ieee80211_rateset rt2661_rateset_11g = 184 { 12, { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108 } }; 185 186 static const struct { 187 uint32_t reg; 188 uint32_t val; 189 } rt2661_def_mac[] = { 190 RT2661_DEF_MAC 191 }; 192 193 static const struct { 194 uint8_t reg; 195 uint8_t val; 196 } rt2661_def_bbp[] = { 197 RT2661_DEF_BBP 198 }; 199 200 static const struct rfprog { 201 uint8_t chan; 202 uint32_t r1, r2, r3, r4; 203 } rt2661_rf5225_1[] = { 204 RT2661_RF5225_1 205 }, rt2661_rf5225_2[] = { 206 RT2661_RF5225_2 207 }; 208 209 int 210 rt2661_attach(void *xsc, int id) 211 { 212 struct rt2661_softc *sc = xsc; 213 struct ieee80211com *ic = &sc->sc_ic; 214 struct ifnet *ifp = &sc->sc_if; 215 uint32_t val; 216 int error, i, ntries; 217 218 sc->sc_id = id; 219 220 sc->amrr.amrr_min_success_threshold = 1; 221 sc->amrr.amrr_max_success_threshold = 15; 222 callout_init(&sc->scan_ch, 0); 223 callout_init(&sc->amrr_ch, 0); 224 225 /* wait for NIC to initialize */ 226 for (ntries = 0; ntries < 1000; ntries++) { 227 if ((val = RAL_READ(sc, RT2661_MAC_CSR0)) != 0) 228 break; 229 DELAY(1000); 230 } 231 if (ntries == 1000) { 232 aprint_error_dev(&sc->sc_dev, "timeout waiting for NIC to initialize\n"); 233 return EIO; 234 } 235 236 /* retrieve RF rev. no and various other things from EEPROM */ 237 rt2661_read_eeprom(sc); 238 aprint_normal_dev(&sc->sc_dev, "802.11 address %s\n", 239 ether_sprintf(ic->ic_myaddr)); 240 241 aprint_normal_dev(&sc->sc_dev, "MAC/BBP RT%X, RF %s\n", val, 242 rt2661_get_rf(sc->rf_rev)); 243 244 /* 245 * Allocate Tx and Rx rings. 246 */ 247 error = rt2661_alloc_tx_ring(sc, &sc->txq[0], RT2661_TX_RING_COUNT); 248 if (error != 0) { 249 aprint_error_dev(&sc->sc_dev, "could not allocate Tx ring 0\n"); 250 goto fail1; 251 } 252 253 error = rt2661_alloc_tx_ring(sc, &sc->txq[1], RT2661_TX_RING_COUNT); 254 if (error != 0) { 255 aprint_error_dev(&sc->sc_dev, "could not allocate Tx ring 1\n"); 256 goto fail2; 257 } 258 259 error = rt2661_alloc_tx_ring(sc, &sc->txq[2], RT2661_TX_RING_COUNT); 260 if (error != 0) { 261 aprint_error_dev(&sc->sc_dev, "could not allocate Tx ring 2\n"); 262 goto fail3; 263 } 264 265 error = rt2661_alloc_tx_ring(sc, &sc->txq[3], RT2661_TX_RING_COUNT); 266 if (error != 0) { 267 aprint_error_dev(&sc->sc_dev, "could not allocate Tx ring 3\n"); 268 goto fail4; 269 } 270 271 error = rt2661_alloc_tx_ring(sc, &sc->mgtq, RT2661_MGT_RING_COUNT); 272 if (error != 0) { 273 aprint_error_dev(&sc->sc_dev, "could not allocate Mgt ring\n"); 274 goto fail5; 275 } 276 277 error = rt2661_alloc_rx_ring(sc, &sc->rxq, RT2661_RX_RING_COUNT); 278 if (error != 0) { 279 aprint_error_dev(&sc->sc_dev, "could not allocate Rx ring\n"); 280 goto fail6; 281 } 282 283 ifp->if_softc = sc; 284 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 285 ifp->if_init = rt2661_init; 286 ifp->if_stop = rt2661_stop; 287 ifp->if_ioctl = rt2661_ioctl; 288 ifp->if_start = rt2661_start; 289 ifp->if_watchdog = rt2661_watchdog; 290 IFQ_SET_READY(&ifp->if_snd); 291 memcpy(ifp->if_xname, device_xname(&sc->sc_dev), IFNAMSIZ); 292 293 ic->ic_ifp = ifp; 294 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 295 ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */ 296 ic->ic_state = IEEE80211_S_INIT; 297 298 /* set device capabilities */ 299 ic->ic_caps = 300 IEEE80211_C_IBSS | /* IBSS mode supported */ 301 IEEE80211_C_MONITOR | /* monitor mode supported */ 302 IEEE80211_C_HOSTAP | /* HostAP mode supported */ 303 IEEE80211_C_TXPMGT | /* tx power management */ 304 IEEE80211_C_SHPREAMBLE | /* short preamble supported */ 305 IEEE80211_C_SHSLOT | /* short slot time supported */ 306 IEEE80211_C_WPA; /* 802.11i */ 307 308 if (sc->rf_rev == RT2661_RF_5225 || sc->rf_rev == RT2661_RF_5325) { 309 /* set supported .11a rates */ 310 ic->ic_sup_rates[IEEE80211_MODE_11A] = rt2661_rateset_11a; 311 312 /* set supported .11a channels */ 313 for (i = 36; i <= 64; i += 4) { 314 ic->ic_channels[i].ic_freq = 315 ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ); 316 ic->ic_channels[i].ic_flags = IEEE80211_CHAN_A; 317 } 318 for (i = 100; i <= 140; i += 4) { 319 ic->ic_channels[i].ic_freq = 320 ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ); 321 ic->ic_channels[i].ic_flags = IEEE80211_CHAN_A; 322 } 323 for (i = 149; i <= 165; i += 4) { 324 ic->ic_channels[i].ic_freq = 325 ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ); 326 ic->ic_channels[i].ic_flags = IEEE80211_CHAN_A; 327 } 328 } 329 330 /* set supported .11b and .11g rates */ 331 ic->ic_sup_rates[IEEE80211_MODE_11B] = rt2661_rateset_11b; 332 ic->ic_sup_rates[IEEE80211_MODE_11G] = rt2661_rateset_11g; 333 334 /* set supported .11b and .11g channels (1 through 14) */ 335 for (i = 1; i <= 14; i++) { 336 ic->ic_channels[i].ic_freq = 337 ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ); 338 ic->ic_channels[i].ic_flags = 339 IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | 340 IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ; 341 } 342 343 if_attach(ifp); 344 ieee80211_ifattach(ic); 345 ic->ic_node_alloc = rt2661_node_alloc; 346 ic->ic_newassoc = rt2661_newassoc; 347 ic->ic_updateslot = rt2661_updateslot; 348 ic->ic_reset = rt2661_reset; 349 350 /* override state transition machine */ 351 sc->sc_newstate = ic->ic_newstate; 352 ic->ic_newstate = rt2661_newstate; 353 ieee80211_media_init(ic, rt2661_media_change, ieee80211_media_status); 354 355 #if NBPFILTER > 0 356 bpfattach2(ifp, DLT_IEEE802_11_RADIO, 357 sizeof (struct ieee80211_frame) + sizeof(sc->sc_txtap), 358 &sc->sc_drvbpf); 359 360 sc->sc_rxtap_len = roundup(sizeof(sc->sc_rxtap), sizeof(u_int32_t)); 361 sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len); 362 sc->sc_rxtap.wr_ihdr.it_present = htole32(RT2661_RX_RADIOTAP_PRESENT); 363 364 sc->sc_txtap_len = roundup(sizeof(sc->sc_txtap), sizeof(u_int32_t)); 365 sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len); 366 sc->sc_txtap.wt_ihdr.it_present = htole32(RT2661_TX_RADIOTAP_PRESENT); 367 #endif 368 369 ieee80211_announce(ic); 370 371 if (pmf_device_register(&sc->sc_dev, NULL, NULL)) 372 pmf_class_network_register(&sc->sc_dev, ifp); 373 else 374 aprint_error_dev(&sc->sc_dev, 375 "couldn't establish power handler\n"); 376 377 return 0; 378 379 fail6: rt2661_free_tx_ring(sc, &sc->mgtq); 380 fail5: rt2661_free_tx_ring(sc, &sc->txq[3]); 381 fail4: rt2661_free_tx_ring(sc, &sc->txq[2]); 382 fail3: rt2661_free_tx_ring(sc, &sc->txq[1]); 383 fail2: rt2661_free_tx_ring(sc, &sc->txq[0]); 384 fail1: return ENXIO; 385 } 386 387 int 388 rt2661_detach(void *xsc) 389 { 390 struct rt2661_softc *sc = xsc; 391 struct ifnet *ifp = &sc->sc_if; 392 393 callout_stop(&sc->scan_ch); 394 callout_stop(&sc->amrr_ch); 395 396 pmf_device_deregister(&sc->sc_dev); 397 398 ieee80211_ifdetach(&sc->sc_ic); 399 if_detach(ifp); 400 401 rt2661_free_tx_ring(sc, &sc->txq[0]); 402 rt2661_free_tx_ring(sc, &sc->txq[1]); 403 rt2661_free_tx_ring(sc, &sc->txq[2]); 404 rt2661_free_tx_ring(sc, &sc->txq[3]); 405 rt2661_free_tx_ring(sc, &sc->mgtq); 406 rt2661_free_rx_ring(sc, &sc->rxq); 407 408 return 0; 409 } 410 411 static int 412 rt2661_alloc_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring, 413 int count) 414 { 415 int i, nsegs, error; 416 417 ring->count = count; 418 ring->queued = 0; 419 ring->cur = ring->next = ring->stat = 0; 420 421 error = bus_dmamap_create(sc->sc_dmat, count * RT2661_TX_DESC_SIZE, 1, 422 count * RT2661_TX_DESC_SIZE, 0, BUS_DMA_NOWAIT, &ring->map); 423 if (error != 0) { 424 aprint_error_dev(&sc->sc_dev, "could not create desc DMA map\n"); 425 goto fail; 426 } 427 428 error = bus_dmamem_alloc(sc->sc_dmat, count * RT2661_TX_DESC_SIZE, 429 PAGE_SIZE, 0, &ring->seg, 1, &nsegs, BUS_DMA_NOWAIT); 430 if (error != 0) { 431 aprint_error_dev(&sc->sc_dev, "could not allocate DMA memory\n"); 432 goto fail; 433 } 434 435 error = bus_dmamem_map(sc->sc_dmat, &ring->seg, nsegs, 436 count * RT2661_TX_DESC_SIZE, (void **)&ring->desc, 437 BUS_DMA_NOWAIT); 438 if (error != 0) { 439 aprint_error_dev(&sc->sc_dev, "could not map desc DMA memory\n"); 440 goto fail; 441 } 442 443 error = bus_dmamap_load(sc->sc_dmat, ring->map, ring->desc, 444 count * RT2661_TX_DESC_SIZE, NULL, BUS_DMA_NOWAIT); 445 if (error != 0) { 446 aprint_error_dev(&sc->sc_dev, "could not load desc DMA map\n"); 447 goto fail; 448 } 449 450 memset(ring->desc, 0, count * RT2661_TX_DESC_SIZE); 451 ring->physaddr = ring->map->dm_segs->ds_addr; 452 453 ring->data = malloc(count * sizeof (struct rt2661_tx_data), M_DEVBUF, 454 M_NOWAIT); 455 if (ring->data == NULL) { 456 aprint_error_dev(&sc->sc_dev, "could not allocate soft data\n"); 457 error = ENOMEM; 458 goto fail; 459 } 460 461 memset(ring->data, 0, count * sizeof (struct rt2661_tx_data)); 462 for (i = 0; i < count; i++) { 463 error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 464 RT2661_MAX_SCATTER, MCLBYTES, 0, BUS_DMA_NOWAIT, 465 &ring->data[i].map); 466 if (error != 0) { 467 aprint_error_dev(&sc->sc_dev, "could not create DMA map\n"); 468 goto fail; 469 } 470 } 471 472 return 0; 473 474 fail: rt2661_free_tx_ring(sc, ring); 475 return error; 476 } 477 478 static void 479 rt2661_reset_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring) 480 { 481 struct rt2661_tx_desc *desc; 482 struct rt2661_tx_data *data; 483 int i; 484 485 for (i = 0; i < ring->count; i++) { 486 desc = &ring->desc[i]; 487 data = &ring->data[i]; 488 489 if (data->m != NULL) { 490 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 491 data->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); 492 bus_dmamap_unload(sc->sc_dmat, data->map); 493 m_freem(data->m); 494 data->m = NULL; 495 } 496 497 if (data->ni != NULL) { 498 ieee80211_free_node(data->ni); 499 data->ni = NULL; 500 } 501 502 desc->flags = 0; 503 } 504 505 bus_dmamap_sync(sc->sc_dmat, ring->map, 0, ring->map->dm_mapsize, 506 BUS_DMASYNC_PREWRITE); 507 508 ring->queued = 0; 509 ring->cur = ring->next = ring->stat = 0; 510 } 511 512 513 static void 514 rt2661_free_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring) 515 { 516 struct rt2661_tx_data *data; 517 int i; 518 519 if (ring->desc != NULL) { 520 bus_dmamap_sync(sc->sc_dmat, ring->map, 0, 521 ring->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); 522 bus_dmamap_unload(sc->sc_dmat, ring->map); 523 bus_dmamem_unmap(sc->sc_dmat, (void *)ring->desc, 524 ring->count * RT2661_TX_DESC_SIZE); 525 bus_dmamem_free(sc->sc_dmat, &ring->seg, 1); 526 } 527 528 if (ring->data != NULL) { 529 for (i = 0; i < ring->count; i++) { 530 data = &ring->data[i]; 531 532 if (data->m != NULL) { 533 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 534 data->map->dm_mapsize, 535 BUS_DMASYNC_POSTWRITE); 536 bus_dmamap_unload(sc->sc_dmat, data->map); 537 m_freem(data->m); 538 } 539 540 if (data->ni != NULL) 541 ieee80211_free_node(data->ni); 542 543 if (data->map != NULL) 544 bus_dmamap_destroy(sc->sc_dmat, data->map); 545 } 546 free(ring->data, M_DEVBUF); 547 } 548 } 549 550 static int 551 rt2661_alloc_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring, 552 int count) 553 { 554 struct rt2661_rx_desc *desc; 555 struct rt2661_rx_data *data; 556 int i, nsegs, error; 557 558 ring->count = count; 559 ring->cur = ring->next = 0; 560 561 error = bus_dmamap_create(sc->sc_dmat, count * RT2661_RX_DESC_SIZE, 1, 562 count * RT2661_RX_DESC_SIZE, 0, BUS_DMA_NOWAIT, &ring->map); 563 if (error != 0) { 564 aprint_error_dev(&sc->sc_dev, "could not create desc DMA map\n"); 565 goto fail; 566 } 567 568 error = bus_dmamem_alloc(sc->sc_dmat, count * RT2661_RX_DESC_SIZE, 569 PAGE_SIZE, 0, &ring->seg, 1, &nsegs, BUS_DMA_NOWAIT); 570 if (error != 0) { 571 aprint_error_dev(&sc->sc_dev, "could not allocate DMA memory\n"); 572 goto fail; 573 } 574 575 error = bus_dmamem_map(sc->sc_dmat, &ring->seg, nsegs, 576 count * RT2661_RX_DESC_SIZE, (void **)&ring->desc, 577 BUS_DMA_NOWAIT); 578 if (error != 0) { 579 aprint_error_dev(&sc->sc_dev, "could not map desc DMA memory\n"); 580 goto fail; 581 } 582 583 error = bus_dmamap_load(sc->sc_dmat, ring->map, ring->desc, 584 count * RT2661_RX_DESC_SIZE, NULL, BUS_DMA_NOWAIT); 585 if (error != 0) { 586 aprint_error_dev(&sc->sc_dev, "could not load desc DMA map\n"); 587 goto fail; 588 } 589 590 memset(ring->desc, 0, count * RT2661_RX_DESC_SIZE); 591 ring->physaddr = ring->map->dm_segs->ds_addr; 592 593 ring->data = malloc(count * sizeof (struct rt2661_rx_data), M_DEVBUF, 594 M_NOWAIT); 595 if (ring->data == NULL) { 596 aprint_error_dev(&sc->sc_dev, "could not allocate soft data\n"); 597 error = ENOMEM; 598 goto fail; 599 } 600 601 /* 602 * Pre-allocate Rx buffers and populate Rx ring. 603 */ 604 memset(ring->data, 0, count * sizeof (struct rt2661_rx_data)); 605 for (i = 0; i < count; i++) { 606 desc = &sc->rxq.desc[i]; 607 data = &sc->rxq.data[i]; 608 609 error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES, 610 0, BUS_DMA_NOWAIT, &data->map); 611 if (error != 0) { 612 aprint_error_dev(&sc->sc_dev, "could not create DMA map\n"); 613 goto fail; 614 } 615 616 MGETHDR(data->m, M_DONTWAIT, MT_DATA); 617 if (data->m == NULL) { 618 aprint_error_dev(&sc->sc_dev, "could not allocate rx mbuf\n"); 619 error = ENOMEM; 620 goto fail; 621 } 622 623 MCLGET(data->m, M_DONTWAIT); 624 if (!(data->m->m_flags & M_EXT)) { 625 aprint_error_dev(&sc->sc_dev, "could not allocate rx mbuf cluster\n"); 626 error = ENOMEM; 627 goto fail; 628 } 629 630 error = bus_dmamap_load(sc->sc_dmat, data->map, 631 mtod(data->m, void *), MCLBYTES, NULL, BUS_DMA_NOWAIT); 632 if (error != 0) { 633 aprint_error_dev(&sc->sc_dev, "could not load rx buf DMA map"); 634 goto fail; 635 } 636 637 desc->physaddr = htole32(data->map->dm_segs->ds_addr); 638 desc->flags = htole32(RT2661_RX_BUSY); 639 } 640 641 bus_dmamap_sync(sc->sc_dmat, ring->map, 0, ring->map->dm_mapsize, 642 BUS_DMASYNC_PREWRITE); 643 644 return 0; 645 646 fail: rt2661_free_rx_ring(sc, ring); 647 return error; 648 } 649 650 static void 651 rt2661_reset_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring) 652 { 653 int i; 654 655 for (i = 0; i < ring->count; i++) 656 ring->desc[i].flags = htole32(RT2661_RX_BUSY); 657 658 bus_dmamap_sync(sc->sc_dmat, ring->map, 0, ring->map->dm_mapsize, 659 BUS_DMASYNC_PREWRITE); 660 661 ring->cur = ring->next = 0; 662 } 663 664 static void 665 rt2661_free_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring) 666 { 667 struct rt2661_rx_data *data; 668 int i; 669 670 if (ring->desc != NULL) { 671 bus_dmamap_sync(sc->sc_dmat, ring->map, 0, 672 ring->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); 673 bus_dmamap_unload(sc->sc_dmat, ring->map); 674 bus_dmamem_unmap(sc->sc_dmat, (void *)ring->desc, 675 ring->count * RT2661_RX_DESC_SIZE); 676 bus_dmamem_free(sc->sc_dmat, &ring->seg, 1); 677 } 678 679 if (ring->data != NULL) { 680 for (i = 0; i < ring->count; i++) { 681 data = &ring->data[i]; 682 683 if (data->m != NULL) { 684 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 685 data->map->dm_mapsize, 686 BUS_DMASYNC_POSTREAD); 687 bus_dmamap_unload(sc->sc_dmat, data->map); 688 m_freem(data->m); 689 } 690 691 if (data->map != NULL) 692 bus_dmamap_destroy(sc->sc_dmat, data->map); 693 } 694 free(ring->data, M_DEVBUF); 695 } 696 } 697 698 static struct ieee80211_node * 699 rt2661_node_alloc(struct ieee80211_node_table *nt) 700 { 701 struct rt2661_node *rn; 702 703 rn = malloc(sizeof (struct rt2661_node), M_80211_NODE, 704 M_NOWAIT | M_ZERO); 705 706 return (rn != NULL) ? &rn->ni : NULL; 707 } 708 709 static int 710 rt2661_media_change(struct ifnet *ifp) 711 { 712 int error; 713 714 error = ieee80211_media_change(ifp); 715 if (error != ENETRESET) 716 return error; 717 718 if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == (IFF_UP | IFF_RUNNING)) 719 rt2661_init(ifp); 720 721 return 0; 722 } 723 724 /* 725 * This function is called periodically (every 200ms) during scanning to 726 * switch from one channel to another. 727 */ 728 static void 729 rt2661_next_scan(void *arg) 730 { 731 struct rt2661_softc *sc = arg; 732 struct ieee80211com *ic = &sc->sc_ic; 733 int s; 734 735 s = splnet(); 736 if (ic->ic_state == IEEE80211_S_SCAN) 737 ieee80211_next_scan(ic); 738 splx(s); 739 } 740 741 /* 742 * This function is called for each neighbor node. 743 */ 744 static void 745 rt2661_iter_func(void *arg, struct ieee80211_node *ni) 746 { 747 struct rt2661_softc *sc = arg; 748 struct rt2661_node *rn = (struct rt2661_node *)ni; 749 750 ieee80211_amrr_choose(&sc->amrr, ni, &rn->amn); 751 } 752 753 /* 754 * This function is called periodically (every 500ms) in RUN state to update 755 * various settings like rate control statistics or Rx sensitivity. 756 */ 757 static void 758 rt2661_updatestats(void *arg) 759 { 760 struct rt2661_softc *sc = arg; 761 struct ieee80211com *ic = &sc->sc_ic; 762 int s; 763 764 s = splnet(); 765 if (ic->ic_opmode == IEEE80211_M_STA) 766 rt2661_iter_func(sc, ic->ic_bss); 767 else 768 ieee80211_iterate_nodes(&ic->ic_sta, rt2661_iter_func, arg); 769 770 /* update rx sensitivity every 1 sec */ 771 if (++sc->ncalls & 1) 772 rt2661_rx_tune(sc); 773 splx(s); 774 775 callout_reset(&sc->amrr_ch, hz / 2, rt2661_updatestats, sc); 776 } 777 778 static void 779 rt2661_newassoc(struct ieee80211_node *ni, int isnew) 780 { 781 struct rt2661_softc *sc = ni->ni_ic->ic_ifp->if_softc; 782 int i; 783 784 ieee80211_amrr_node_init(&sc->amrr, &((struct rt2661_node *)ni)->amn); 785 786 /* set rate to some reasonable initial value */ 787 for (i = ni->ni_rates.rs_nrates - 1; 788 i > 0 && (ni->ni_rates.rs_rates[i] & IEEE80211_RATE_VAL) > 72; 789 i--); 790 ni->ni_txrate = i; 791 } 792 793 static int 794 rt2661_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg) 795 { 796 struct rt2661_softc *sc = ic->ic_ifp->if_softc; 797 enum ieee80211_state ostate; 798 struct ieee80211_node *ni; 799 uint32_t tmp; 800 801 ostate = ic->ic_state; 802 callout_stop(&sc->scan_ch); 803 804 switch (nstate) { 805 case IEEE80211_S_INIT: 806 callout_stop(&sc->amrr_ch); 807 808 if (ostate == IEEE80211_S_RUN) { 809 /* abort TSF synchronization */ 810 tmp = RAL_READ(sc, RT2661_TXRX_CSR9); 811 RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp & ~0x00ffffff); 812 } 813 break; 814 815 case IEEE80211_S_SCAN: 816 rt2661_set_chan(sc, ic->ic_curchan); 817 callout_reset(&sc->scan_ch, hz / 5, rt2661_next_scan, sc); 818 break; 819 820 case IEEE80211_S_AUTH: 821 case IEEE80211_S_ASSOC: 822 rt2661_set_chan(sc, ic->ic_curchan); 823 break; 824 825 case IEEE80211_S_RUN: 826 rt2661_set_chan(sc, ic->ic_curchan); 827 828 ni = ic->ic_bss; 829 830 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 831 rt2661_set_slottime(sc); 832 rt2661_enable_mrr(sc); 833 rt2661_set_txpreamble(sc); 834 rt2661_set_basicrates(sc, &ni->ni_rates); 835 rt2661_set_bssid(sc, ni->ni_bssid); 836 } 837 838 if (ic->ic_opmode == IEEE80211_M_HOSTAP || 839 ic->ic_opmode == IEEE80211_M_IBSS) 840 rt2661_prepare_beacon(sc); 841 842 if (ic->ic_opmode == IEEE80211_M_STA) { 843 /* fake a join to init the tx rate */ 844 rt2661_newassoc(ni, 1); 845 } 846 847 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 848 sc->ncalls = 0; 849 sc->avg_rssi = -95; /* reset EMA */ 850 callout_reset(&sc->amrr_ch, hz / 2, 851 rt2661_updatestats, sc); 852 rt2661_enable_tsf_sync(sc); 853 } 854 break; 855 } 856 857 return sc->sc_newstate(ic, nstate, arg); 858 } 859 860 /* 861 * Read 16 bits at address 'addr' from the serial EEPROM (either 93C46 or 862 * 93C66). 863 */ 864 static uint16_t 865 rt2661_eeprom_read(struct rt2661_softc *sc, uint8_t addr) 866 { 867 uint32_t tmp; 868 uint16_t val; 869 int n; 870 871 /* clock C once before the first command */ 872 RT2661_EEPROM_CTL(sc, 0); 873 874 RT2661_EEPROM_CTL(sc, RT2661_S); 875 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 876 RT2661_EEPROM_CTL(sc, RT2661_S); 877 878 /* write start bit (1) */ 879 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D); 880 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C); 881 882 /* write READ opcode (10) */ 883 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D); 884 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C); 885 RT2661_EEPROM_CTL(sc, RT2661_S); 886 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 887 888 /* write address (A5-A0 or A7-A0) */ 889 n = (RAL_READ(sc, RT2661_E2PROM_CSR) & RT2661_93C46) ? 5 : 7; 890 for (; n >= 0; n--) { 891 RT2661_EEPROM_CTL(sc, RT2661_S | 892 (((addr >> n) & 1) << RT2661_SHIFT_D)); 893 RT2661_EEPROM_CTL(sc, RT2661_S | 894 (((addr >> n) & 1) << RT2661_SHIFT_D) | RT2661_C); 895 } 896 897 RT2661_EEPROM_CTL(sc, RT2661_S); 898 899 /* read data Q15-Q0 */ 900 val = 0; 901 for (n = 15; n >= 0; n--) { 902 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 903 tmp = RAL_READ(sc, RT2661_E2PROM_CSR); 904 val |= ((tmp & RT2661_Q) >> RT2661_SHIFT_Q) << n; 905 RT2661_EEPROM_CTL(sc, RT2661_S); 906 } 907 908 RT2661_EEPROM_CTL(sc, 0); 909 910 /* clear Chip Select and clock C */ 911 RT2661_EEPROM_CTL(sc, RT2661_S); 912 RT2661_EEPROM_CTL(sc, 0); 913 RT2661_EEPROM_CTL(sc, RT2661_C); 914 915 return val; 916 } 917 918 static void 919 rt2661_tx_intr(struct rt2661_softc *sc) 920 { 921 struct ifnet *ifp = &sc->sc_if; 922 struct rt2661_tx_ring *txq; 923 struct rt2661_tx_data *data; 924 struct rt2661_node *rn; 925 uint32_t val; 926 int qid, retrycnt; 927 928 for (;;) { 929 val = RAL_READ(sc, RT2661_STA_CSR4); 930 if (!(val & RT2661_TX_STAT_VALID)) 931 break; 932 933 /* retrieve the queue in which this frame was sent */ 934 qid = RT2661_TX_QID(val); 935 txq = (qid <= 3) ? &sc->txq[qid] : &sc->mgtq; 936 937 /* retrieve rate control algorithm context */ 938 data = &txq->data[txq->stat]; 939 rn = (struct rt2661_node *)data->ni; 940 941 /* if no frame has been sent, ignore */ 942 if (rn == NULL) 943 continue; 944 945 switch (RT2661_TX_RESULT(val)) { 946 case RT2661_TX_SUCCESS: 947 retrycnt = RT2661_TX_RETRYCNT(val); 948 949 DPRINTFN(10, ("data frame sent successfully after " 950 "%d retries\n", retrycnt)); 951 rn->amn.amn_txcnt++; 952 if (retrycnt > 0) 953 rn->amn.amn_retrycnt++; 954 ifp->if_opackets++; 955 break; 956 957 case RT2661_TX_RETRY_FAIL: 958 DPRINTFN(9, ("sending data frame failed (too much " 959 "retries)\n")); 960 rn->amn.amn_txcnt++; 961 rn->amn.amn_retrycnt++; 962 ifp->if_oerrors++; 963 break; 964 965 default: 966 /* other failure */ 967 aprint_error_dev(&sc->sc_dev, "sending data frame failed 0x%08x\n", val); 968 ifp->if_oerrors++; 969 } 970 971 ieee80211_free_node(data->ni); 972 data->ni = NULL; 973 974 DPRINTFN(15, ("tx done q=%d idx=%u\n", qid, txq->stat)); 975 976 txq->queued--; 977 if (++txq->stat >= txq->count) /* faster than % count */ 978 txq->stat = 0; 979 } 980 981 sc->sc_tx_timer = 0; 982 ifp->if_flags &= ~IFF_OACTIVE; 983 rt2661_start(ifp); 984 } 985 986 static void 987 rt2661_tx_dma_intr(struct rt2661_softc *sc, struct rt2661_tx_ring *txq) 988 { 989 struct rt2661_tx_desc *desc; 990 struct rt2661_tx_data *data; 991 992 for (;;) { 993 desc = &txq->desc[txq->next]; 994 data = &txq->data[txq->next]; 995 996 bus_dmamap_sync(sc->sc_dmat, txq->map, 997 txq->next * RT2661_TX_DESC_SIZE, RT2661_TX_DESC_SIZE, 998 BUS_DMASYNC_POSTREAD); 999 1000 if ((le32toh(desc->flags) & RT2661_TX_BUSY) || 1001 !(le32toh(desc->flags) & RT2661_TX_VALID)) 1002 break; 1003 1004 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 1005 data->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); 1006 bus_dmamap_unload(sc->sc_dmat, data->map); 1007 m_freem(data->m); 1008 data->m = NULL; 1009 /* node reference is released in rt2661_tx_intr() */ 1010 1011 /* descriptor is no longer valid */ 1012 desc->flags &= ~htole32(RT2661_TX_VALID); 1013 1014 bus_dmamap_sync(sc->sc_dmat, txq->map, 1015 txq->next * RT2661_TX_DESC_SIZE, RT2661_TX_DESC_SIZE, 1016 BUS_DMASYNC_PREWRITE); 1017 1018 DPRINTFN(15, ("tx dma done q=%p idx=%u\n", txq, txq->next)); 1019 1020 if (++txq->next >= txq->count) /* faster than % count */ 1021 txq->next = 0; 1022 } 1023 } 1024 1025 static void 1026 rt2661_rx_intr(struct rt2661_softc *sc) 1027 { 1028 struct ieee80211com *ic = &sc->sc_ic; 1029 struct ifnet *ifp = &sc->sc_if; 1030 struct rt2661_rx_desc *desc; 1031 struct rt2661_rx_data *data; 1032 struct ieee80211_frame *wh; 1033 struct ieee80211_node *ni; 1034 struct mbuf *mnew, *m; 1035 int error, rssi; 1036 1037 for (;;) { 1038 desc = &sc->rxq.desc[sc->rxq.cur]; 1039 data = &sc->rxq.data[sc->rxq.cur]; 1040 1041 bus_dmamap_sync(sc->sc_dmat, sc->rxq.map, 1042 sc->rxq.cur * RT2661_RX_DESC_SIZE, RT2661_RX_DESC_SIZE, 1043 BUS_DMASYNC_POSTREAD); 1044 1045 if (le32toh(desc->flags) & RT2661_RX_BUSY) 1046 break; 1047 1048 if ((le32toh(desc->flags) & RT2661_RX_PHY_ERROR) || 1049 (le32toh(desc->flags) & RT2661_RX_CRC_ERROR)) { 1050 /* 1051 * This should not happen since we did not request 1052 * to receive those frames when we filled TXRX_CSR0. 1053 */ 1054 DPRINTFN(5, ("PHY or CRC error flags 0x%08x\n", 1055 le32toh(desc->flags))); 1056 ifp->if_ierrors++; 1057 goto skip; 1058 } 1059 1060 if ((le32toh(desc->flags) & RT2661_RX_CIPHER_MASK) != 0) { 1061 ifp->if_ierrors++; 1062 goto skip; 1063 } 1064 1065 /* 1066 * Try to allocate a new mbuf for this ring element and load it 1067 * before processing the current mbuf. If the ring element 1068 * cannot be loaded, drop the received packet and reuse the old 1069 * mbuf. In the unlikely case that the old mbuf can't be 1070 * reloaded either, explicitly panic. 1071 */ 1072 MGETHDR(mnew, M_DONTWAIT, MT_DATA); 1073 if (mnew == NULL) { 1074 ifp->if_ierrors++; 1075 goto skip; 1076 } 1077 1078 MCLGET(mnew, M_DONTWAIT); 1079 if (!(mnew->m_flags & M_EXT)) { 1080 m_freem(mnew); 1081 ifp->if_ierrors++; 1082 goto skip; 1083 } 1084 1085 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 1086 data->map->dm_mapsize, BUS_DMASYNC_POSTREAD); 1087 bus_dmamap_unload(sc->sc_dmat, data->map); 1088 1089 error = bus_dmamap_load(sc->sc_dmat, data->map, 1090 mtod(mnew, void *), MCLBYTES, NULL, BUS_DMA_NOWAIT); 1091 if (error != 0) { 1092 m_freem(mnew); 1093 1094 /* try to reload the old mbuf */ 1095 error = bus_dmamap_load(sc->sc_dmat, data->map, 1096 mtod(data->m, void *), MCLBYTES, NULL, 1097 BUS_DMA_NOWAIT); 1098 if (error != 0) { 1099 /* very unlikely that it will fail... */ 1100 panic("%s: could not load old rx mbuf", 1101 device_xname(&sc->sc_dev)); 1102 } 1103 /* physical address may have changed */ 1104 desc->physaddr = htole32(data->map->dm_segs->ds_addr); 1105 ifp->if_ierrors++; 1106 goto skip; 1107 } 1108 1109 /* 1110 * New mbuf successfully loaded, update Rx ring and continue 1111 * processing. 1112 */ 1113 m = data->m; 1114 data->m = mnew; 1115 desc->physaddr = htole32(data->map->dm_segs->ds_addr); 1116 1117 /* finalize mbuf */ 1118 m->m_pkthdr.rcvif = ifp; 1119 m->m_pkthdr.len = m->m_len = 1120 (le32toh(desc->flags) >> 16) & 0xfff; 1121 1122 #if NBPFILTER > 0 1123 if (sc->sc_drvbpf != NULL) { 1124 struct rt2661_rx_radiotap_header *tap = &sc->sc_rxtap; 1125 uint32_t tsf_lo, tsf_hi; 1126 1127 /* get timestamp (low and high 32 bits) */ 1128 tsf_hi = RAL_READ(sc, RT2661_TXRX_CSR13); 1129 tsf_lo = RAL_READ(sc, RT2661_TXRX_CSR12); 1130 1131 tap->wr_tsf = 1132 htole64(((uint64_t)tsf_hi << 32) | tsf_lo); 1133 tap->wr_flags = 0; 1134 tap->wr_rate = rt2661_rxrate(desc); 1135 tap->wr_chan_freq = htole16(sc->sc_curchan->ic_freq); 1136 tap->wr_chan_flags = htole16(sc->sc_curchan->ic_flags); 1137 tap->wr_antsignal = desc->rssi; 1138 1139 bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_rxtap_len, m); 1140 } 1141 #endif 1142 1143 wh = mtod(m, struct ieee80211_frame *); 1144 ni = ieee80211_find_rxnode(ic, 1145 (struct ieee80211_frame_min *)wh); 1146 1147 /* send the frame to the 802.11 layer */ 1148 ieee80211_input(ic, m, ni, desc->rssi, 0); 1149 1150 /*- 1151 * Keep track of the average RSSI using an Exponential Moving 1152 * Average (EMA) of 8 Wilder's days: 1153 * avg = (1 / N) x rssi + ((N - 1) / N) x avg 1154 */ 1155 rssi = rt2661_get_rssi(sc, desc->rssi); 1156 sc->avg_rssi = (rssi + 7 * sc->avg_rssi) / 8; 1157 1158 /* node is no longer needed */ 1159 ieee80211_free_node(ni); 1160 1161 skip: desc->flags |= htole32(RT2661_RX_BUSY); 1162 1163 bus_dmamap_sync(sc->sc_dmat, sc->rxq.map, 1164 sc->rxq.cur * RT2661_RX_DESC_SIZE, RT2661_RX_DESC_SIZE, 1165 BUS_DMASYNC_PREWRITE); 1166 1167 DPRINTFN(16, ("rx intr idx=%u\n", sc->rxq.cur)); 1168 1169 sc->rxq.cur = (sc->rxq.cur + 1) % RT2661_RX_RING_COUNT; 1170 } 1171 1172 /* 1173 * In HostAP mode, ieee80211_input() will enqueue packets in if_snd 1174 * without calling if_start(). 1175 */ 1176 if (!IFQ_IS_EMPTY(&ifp->if_snd) && !(ifp->if_flags & IFF_OACTIVE)) 1177 rt2661_start(ifp); 1178 } 1179 1180 /* 1181 * This function is called in HostAP or IBSS modes when it's time to send a 1182 * new beacon (every ni_intval milliseconds). 1183 */ 1184 static void 1185 rt2661_mcu_beacon_expire(struct rt2661_softc *sc) 1186 { 1187 struct ieee80211com *ic = &sc->sc_ic; 1188 1189 if (sc->sc_flags & RT2661_UPDATE_SLOT) { 1190 sc->sc_flags &= ~RT2661_UPDATE_SLOT; 1191 sc->sc_flags |= RT2661_SET_SLOTTIME; 1192 } else if (sc->sc_flags & RT2661_SET_SLOTTIME) { 1193 sc->sc_flags &= ~RT2661_SET_SLOTTIME; 1194 rt2661_set_slottime(sc); 1195 } 1196 1197 if (ic->ic_curmode == IEEE80211_MODE_11G) { 1198 /* update ERP Information Element */ 1199 RAL_WRITE_1(sc, sc->erp_csr, ic->ic_bss->ni_erp); 1200 RAL_RW_BARRIER_1(sc, sc->erp_csr); 1201 } 1202 1203 DPRINTFN(15, ("beacon expired\n")); 1204 } 1205 1206 static void 1207 rt2661_mcu_wakeup(struct rt2661_softc *sc) 1208 { 1209 RAL_WRITE(sc, RT2661_MAC_CSR11, 5 << 16); 1210 1211 RAL_WRITE(sc, RT2661_SOFT_RESET_CSR, 0x7); 1212 RAL_WRITE(sc, RT2661_IO_CNTL_CSR, 0x18); 1213 RAL_WRITE(sc, RT2661_PCI_USEC_CSR, 0x20); 1214 1215 /* send wakeup command to MCU */ 1216 rt2661_tx_cmd(sc, RT2661_MCU_CMD_WAKEUP, 0); 1217 } 1218 1219 static void 1220 rt2661_mcu_cmd_intr(struct rt2661_softc *sc) 1221 { 1222 RAL_READ(sc, RT2661_M2H_CMD_DONE_CSR); 1223 RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff); 1224 } 1225 1226 int 1227 rt2661_intr(void *arg) 1228 { 1229 struct rt2661_softc *sc = arg; 1230 struct ifnet *ifp = &sc->sc_if; 1231 uint32_t r1, r2; 1232 int rv = 0; 1233 1234 /* don't re-enable interrupts if we're shutting down */ 1235 if (!(ifp->if_flags & IFF_RUNNING)) { 1236 /* disable MAC and MCU interrupts */ 1237 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffff7f); 1238 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff); 1239 return 0; 1240 } 1241 1242 for (;;) { 1243 r1 = RAL_READ(sc, RT2661_INT_SOURCE_CSR); 1244 r2 = RAL_READ(sc, RT2661_MCU_INT_SOURCE_CSR); 1245 1246 if ((r1 & RT2661_INT_CSR_ALL) == 0 && 1247 (r2 & RT2661_MCU_INT_ALL) == 0) 1248 break; 1249 1250 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, r1); 1251 RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, r2); 1252 1253 rv = 1; 1254 1255 if (r1 & RT2661_MGT_DONE) 1256 rt2661_tx_dma_intr(sc, &sc->mgtq); 1257 1258 if (r1 & RT2661_RX_DONE) 1259 rt2661_rx_intr(sc); 1260 1261 if (r1 & RT2661_TX0_DMA_DONE) 1262 rt2661_tx_dma_intr(sc, &sc->txq[0]); 1263 1264 if (r1 & RT2661_TX1_DMA_DONE) 1265 rt2661_tx_dma_intr(sc, &sc->txq[1]); 1266 1267 if (r1 & RT2661_TX2_DMA_DONE) 1268 rt2661_tx_dma_intr(sc, &sc->txq[2]); 1269 1270 if (r1 & RT2661_TX3_DMA_DONE) 1271 rt2661_tx_dma_intr(sc, &sc->txq[3]); 1272 1273 if (r1 & RT2661_TX_DONE) 1274 rt2661_tx_intr(sc); 1275 1276 if (r2 & RT2661_MCU_CMD_DONE) 1277 rt2661_mcu_cmd_intr(sc); 1278 1279 if (r2 & RT2661_MCU_BEACON_EXPIRE) 1280 rt2661_mcu_beacon_expire(sc); 1281 1282 if (r2 & RT2661_MCU_WAKEUP) 1283 rt2661_mcu_wakeup(sc); 1284 } 1285 1286 return rv; 1287 } 1288 1289 /* quickly determine if a given rate is CCK or OFDM */ 1290 #define RAL_RATE_IS_OFDM(rate) ((rate) >= 12 && (rate) != 22) 1291 1292 #define RAL_ACK_SIZE 14 /* 10 + 4(FCS) */ 1293 #define RAL_CTS_SIZE 14 /* 10 + 4(FCS) */ 1294 1295 /* 1296 * This function is only used by the Rx radiotap code. It returns the rate at 1297 * which a given frame was received. 1298 */ 1299 #if NBPFILTER > 0 1300 static uint8_t 1301 rt2661_rxrate(struct rt2661_rx_desc *desc) 1302 { 1303 if (le32toh(desc->flags) & RT2661_RX_OFDM) { 1304 /* reverse function of rt2661_plcp_signal */ 1305 switch (desc->rate & 0xf) { 1306 case 0xb: return 12; 1307 case 0xf: return 18; 1308 case 0xa: return 24; 1309 case 0xe: return 36; 1310 case 0x9: return 48; 1311 case 0xd: return 72; 1312 case 0x8: return 96; 1313 case 0xc: return 108; 1314 } 1315 } else { 1316 if (desc->rate == 10) 1317 return 2; 1318 if (desc->rate == 20) 1319 return 4; 1320 if (desc->rate == 55) 1321 return 11; 1322 if (desc->rate == 110) 1323 return 22; 1324 } 1325 return 2; /* should not get there */ 1326 } 1327 #endif 1328 1329 /* 1330 * Return the expected ack rate for a frame transmitted at rate `rate'. 1331 * XXX: this should depend on the destination node basic rate set. 1332 */ 1333 static int 1334 rt2661_ack_rate(struct ieee80211com *ic, int rate) 1335 { 1336 switch (rate) { 1337 /* CCK rates */ 1338 case 2: 1339 return 2; 1340 case 4: 1341 case 11: 1342 case 22: 1343 return (ic->ic_curmode == IEEE80211_MODE_11B) ? 4 : rate; 1344 1345 /* OFDM rates */ 1346 case 12: 1347 case 18: 1348 return 12; 1349 case 24: 1350 case 36: 1351 return 24; 1352 case 48: 1353 case 72: 1354 case 96: 1355 case 108: 1356 return 48; 1357 } 1358 1359 /* default to 1Mbps */ 1360 return 2; 1361 } 1362 1363 /* 1364 * Compute the duration (in us) needed to transmit `len' bytes at rate `rate'. 1365 * The function automatically determines the operating mode depending on the 1366 * given rate. `flags' indicates whether short preamble is in use or not. 1367 */ 1368 static uint16_t 1369 rt2661_txtime(int len, int rate, uint32_t flags) 1370 { 1371 uint16_t txtime; 1372 1373 if (RAL_RATE_IS_OFDM(rate)) { 1374 /* IEEE Std 802.11g-2003, pp. 44 */ 1375 txtime = (8 + 4 * len + 3 + rate - 1) / rate; 1376 txtime = 16 + 4 + 4 * txtime + 6; 1377 } else { 1378 /* IEEE Std 802.11b-1999, pp. 28 */ 1379 txtime = (16 * len + rate - 1) / rate; 1380 if (rate != 2 && (flags & IEEE80211_F_SHPREAMBLE)) 1381 txtime += 72 + 24; 1382 else 1383 txtime += 144 + 48; 1384 } 1385 return txtime; 1386 } 1387 1388 static uint8_t 1389 rt2661_plcp_signal(int rate) 1390 { 1391 switch (rate) { 1392 /* CCK rates (returned values are device-dependent) */ 1393 case 2: return 0x0; 1394 case 4: return 0x1; 1395 case 11: return 0x2; 1396 case 22: return 0x3; 1397 1398 /* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */ 1399 case 12: return 0xb; 1400 case 18: return 0xf; 1401 case 24: return 0xa; 1402 case 36: return 0xe; 1403 case 48: return 0x9; 1404 case 72: return 0xd; 1405 case 96: return 0x8; 1406 case 108: return 0xc; 1407 1408 /* unsupported rates (should not get there) */ 1409 default: return 0xff; 1410 } 1411 } 1412 1413 static void 1414 rt2661_setup_tx_desc(struct rt2661_softc *sc, struct rt2661_tx_desc *desc, 1415 uint32_t flags, uint16_t xflags, int len, int rate, 1416 const bus_dma_segment_t *segs, int nsegs, int ac) 1417 { 1418 struct ieee80211com *ic = &sc->sc_ic; 1419 uint16_t plcp_length; 1420 int i, remainder; 1421 1422 desc->flags = htole32(flags); 1423 desc->flags |= htole32(len << 16); 1424 1425 desc->xflags = htole16(xflags); 1426 desc->xflags |= htole16(nsegs << 13); 1427 1428 desc->wme = htole16( 1429 RT2661_QID(ac) | 1430 RT2661_AIFSN(2) | 1431 RT2661_LOGCWMIN(4) | 1432 RT2661_LOGCWMAX(10)); 1433 1434 /* 1435 * Remember in which queue this frame was sent. This field is driver 1436 * private data only. It will be made available by the NIC in STA_CSR4 1437 * on Tx interrupts. 1438 */ 1439 desc->qid = ac; 1440 1441 /* setup PLCP fields */ 1442 desc->plcp_signal = rt2661_plcp_signal(rate); 1443 desc->plcp_service = 4; 1444 1445 len += IEEE80211_CRC_LEN; 1446 if (RAL_RATE_IS_OFDM(rate)) { 1447 desc->flags |= htole32(RT2661_TX_OFDM); 1448 1449 plcp_length = len & 0xfff; 1450 desc->plcp_length_hi = plcp_length >> 6; 1451 desc->plcp_length_lo = plcp_length & 0x3f; 1452 } else { 1453 plcp_length = (16 * len + rate - 1) / rate; 1454 if (rate == 22) { 1455 remainder = (16 * len) % 22; 1456 if (remainder != 0 && remainder < 7) 1457 desc->plcp_service |= RT2661_PLCP_LENGEXT; 1458 } 1459 desc->plcp_length_hi = plcp_length >> 8; 1460 desc->plcp_length_lo = plcp_length & 0xff; 1461 1462 if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) 1463 desc->plcp_signal |= 0x08; 1464 } 1465 1466 /* RT2x61 supports scatter with up to 5 segments */ 1467 for (i = 0; i < nsegs; i++) { 1468 desc->addr[i] = htole32(segs[i].ds_addr); 1469 desc->len [i] = htole16(segs[i].ds_len); 1470 } 1471 1472 desc->flags |= htole32(RT2661_TX_BUSY | RT2661_TX_VALID); 1473 } 1474 1475 static int 1476 rt2661_tx_mgt(struct rt2661_softc *sc, struct mbuf *m0, 1477 struct ieee80211_node *ni) 1478 { 1479 struct ieee80211com *ic = &sc->sc_ic; 1480 struct rt2661_tx_desc *desc; 1481 struct rt2661_tx_data *data; 1482 struct ieee80211_frame *wh; 1483 uint16_t dur; 1484 uint32_t flags = 0; 1485 int rate, error; 1486 1487 desc = &sc->mgtq.desc[sc->mgtq.cur]; 1488 data = &sc->mgtq.data[sc->mgtq.cur]; 1489 1490 /* send mgt frames at the lowest available rate */ 1491 rate = IEEE80211_IS_CHAN_5GHZ(ic->ic_curchan) ? 12 : 2; 1492 1493 wh = mtod(m0, struct ieee80211_frame *); 1494 1495 if (wh->i_fc[1] & IEEE80211_FC1_WEP) { 1496 if (ieee80211_crypto_encap(ic, ni, m0) == NULL) { 1497 m_freem(m0); 1498 return ENOBUFS; 1499 } 1500 1501 /* packet header may have moved, reset our local pointer */ 1502 wh = mtod(m0, struct ieee80211_frame *); 1503 } 1504 1505 error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m0, 1506 BUS_DMA_NOWAIT); 1507 if (error != 0) { 1508 aprint_error_dev(&sc->sc_dev, "could not map mbuf (error %d)\n", 1509 error); 1510 m_freem(m0); 1511 return error; 1512 } 1513 1514 #if NBPFILTER > 0 1515 if (sc->sc_drvbpf != NULL) { 1516 struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap; 1517 1518 tap->wt_flags = 0; 1519 tap->wt_rate = rate; 1520 tap->wt_chan_freq = htole16(sc->sc_curchan->ic_freq); 1521 tap->wt_chan_flags = htole16(sc->sc_curchan->ic_flags); 1522 1523 bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m0); 1524 } 1525 #endif 1526 1527 data->m = m0; 1528 data->ni = ni; 1529 1530 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1531 flags |= RT2661_TX_NEED_ACK; 1532 1533 dur = rt2661_txtime(RAL_ACK_SIZE, rate, ic->ic_flags) + 1534 sc->sifs; 1535 *(uint16_t *)wh->i_dur = htole16(dur); 1536 1537 /* tell hardware to set timestamp in probe responses */ 1538 if ((wh->i_fc[0] & 1539 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == 1540 (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP)) 1541 flags |= RT2661_TX_TIMESTAMP; 1542 } 1543 1544 rt2661_setup_tx_desc(sc, desc, flags, 0 /* XXX HWSEQ */, 1545 m0->m_pkthdr.len, rate, data->map->dm_segs, data->map->dm_nsegs, 1546 RT2661_QID_MGT); 1547 1548 bus_dmamap_sync(sc->sc_dmat, data->map, 0, data->map->dm_mapsize, 1549 BUS_DMASYNC_PREWRITE); 1550 bus_dmamap_sync(sc->sc_dmat, sc->mgtq.map, 1551 sc->mgtq.cur * RT2661_TX_DESC_SIZE, RT2661_TX_DESC_SIZE, 1552 BUS_DMASYNC_PREWRITE); 1553 1554 DPRINTFN(10, ("sending mgt frame len=%u idx=%u rate=%u\n", 1555 m0->m_pkthdr.len, sc->mgtq.cur, rate)); 1556 1557 /* kick mgt */ 1558 sc->mgtq.queued++; 1559 sc->mgtq.cur = (sc->mgtq.cur + 1) % RT2661_MGT_RING_COUNT; 1560 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, RT2661_KICK_MGT); 1561 1562 return 0; 1563 } 1564 1565 /* 1566 * Build a RTS control frame. 1567 */ 1568 static struct mbuf * 1569 rt2661_get_rts(struct rt2661_softc *sc, struct ieee80211_frame *wh, 1570 uint16_t dur) 1571 { 1572 struct ieee80211_frame_rts *rts; 1573 struct mbuf *m; 1574 1575 MGETHDR(m, M_DONTWAIT, MT_DATA); 1576 if (m == NULL) { 1577 sc->sc_ic.ic_stats.is_tx_nobuf++; 1578 aprint_error_dev(&sc->sc_dev, "could not allocate RTS frame\n"); 1579 return NULL; 1580 } 1581 1582 rts = mtod(m, struct ieee80211_frame_rts *); 1583 1584 rts->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_CTL | 1585 IEEE80211_FC0_SUBTYPE_RTS; 1586 rts->i_fc[1] = IEEE80211_FC1_DIR_NODS; 1587 *(uint16_t *)rts->i_dur = htole16(dur); 1588 IEEE80211_ADDR_COPY(rts->i_ra, wh->i_addr1); 1589 IEEE80211_ADDR_COPY(rts->i_ta, wh->i_addr2); 1590 1591 m->m_pkthdr.len = m->m_len = sizeof (struct ieee80211_frame_rts); 1592 1593 return m; 1594 } 1595 1596 static int 1597 rt2661_tx_data(struct rt2661_softc *sc, struct mbuf *m0, 1598 struct ieee80211_node *ni, int ac) 1599 { 1600 struct ieee80211com *ic = &sc->sc_ic; 1601 struct rt2661_tx_ring *txq = &sc->txq[ac]; 1602 struct rt2661_tx_desc *desc; 1603 struct rt2661_tx_data *data; 1604 struct ieee80211_frame *wh; 1605 struct ieee80211_key *k; 1606 struct mbuf *mnew; 1607 uint16_t dur; 1608 uint32_t flags = 0; 1609 int rate, useprot, error, tid; 1610 1611 wh = mtod(m0, struct ieee80211_frame *); 1612 1613 if (ic->ic_fixed_rate != IEEE80211_FIXED_RATE_NONE) { 1614 rate = ic->ic_sup_rates[ic->ic_curmode]. 1615 rs_rates[ic->ic_fixed_rate]; 1616 } else 1617 rate = ni->ni_rates.rs_rates[ni->ni_txrate]; 1618 rate &= IEEE80211_RATE_VAL; 1619 if (rate == 0) 1620 rate = 2; /* XXX should not happen */ 1621 1622 if (wh->i_fc[1] & IEEE80211_FC1_WEP) { 1623 k = ieee80211_crypto_encap(ic, ni, m0); 1624 if (k == NULL) { 1625 m_freem(m0); 1626 return ENOBUFS; 1627 } 1628 1629 /* packet header may have moved, reset our local pointer */ 1630 wh = mtod(m0, struct ieee80211_frame *); 1631 } 1632 1633 /* 1634 * Packet Bursting: backoff after ppb=8 frames to give other STAs a 1635 * chance to contend for the wireless medium. 1636 */ 1637 tid = WME_AC_TO_TID(M_WME_GETAC(m0)); 1638 if (ic->ic_opmode == IEEE80211_M_STA && (ni->ni_txseqs[tid] & 7)) 1639 flags |= RT2661_TX_IFS_SIFS; 1640 1641 /* 1642 * IEEE Std 802.11-1999, pp 82: "A STA shall use an RTS/CTS exchange 1643 * for directed frames only when the length of the MPDU is greater 1644 * than the length threshold indicated by" ic_rtsthreshold. 1645 * 1646 * IEEE Std 802.11-2003g, pp 13: "ERP STAs shall use protection 1647 * mechanism (such as RTS/CTS or CTS-to-self) for ERP-OFDM MPDUs of 1648 * type Data or an MMPDU". 1649 */ 1650 useprot = !IEEE80211_IS_MULTICAST(wh->i_addr1) && 1651 (m0->m_pkthdr.len + IEEE80211_CRC_LEN > ic->ic_rtsthreshold || 1652 ((ic->ic_flags & IEEE80211_F_USEPROT) && RAL_RATE_IS_OFDM(rate))); 1653 if (useprot) { 1654 struct mbuf *m; 1655 int rtsrate, ackrate; 1656 1657 rtsrate = IEEE80211_IS_CHAN_5GHZ(ic->ic_curchan) ? 12 : 2; 1658 ackrate = rt2661_ack_rate(ic, rate); 1659 1660 dur = rt2661_txtime(m0->m_pkthdr.len + 4, rate, ic->ic_flags) + 1661 rt2661_txtime(RAL_CTS_SIZE, rtsrate, ic->ic_flags) + 1662 rt2661_txtime(RAL_ACK_SIZE, ackrate, ic->ic_flags) + 1663 3 * sc->sifs; 1664 1665 m = rt2661_get_rts(sc, wh, dur); 1666 if (m == NULL) { 1667 aprint_error_dev(&sc->sc_dev, "could not allocate RTS " 1668 "frame\n"); 1669 m_freem(m0); 1670 return ENOBUFS; 1671 } 1672 1673 desc = &txq->desc[txq->cur]; 1674 data = &txq->data[txq->cur]; 1675 1676 error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m, 1677 BUS_DMA_NOWAIT); 1678 if (error != 0) { 1679 aprint_error_dev(&sc->sc_dev, "could not map mbuf (error %d)\n", error); 1680 m_freem(m); 1681 m_freem(m0); 1682 return error; 1683 } 1684 1685 /* avoid multiple free() of the same node for each fragment */ 1686 ieee80211_ref_node(ni); 1687 1688 data->m = m; 1689 data->ni = ni; 1690 1691 rt2661_setup_tx_desc(sc, desc, RT2661_TX_NEED_ACK | 1692 RT2661_TX_MORE_FRAG, 0, m->m_pkthdr.len, rtsrate, 1693 data->map->dm_segs, data->map->dm_nsegs, ac); 1694 1695 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 1696 data->map->dm_mapsize, BUS_DMASYNC_PREWRITE); 1697 bus_dmamap_sync(sc->sc_dmat, txq->map, 1698 txq->cur * RT2661_TX_DESC_SIZE, RT2661_TX_DESC_SIZE, 1699 BUS_DMASYNC_PREWRITE); 1700 1701 txq->queued++; 1702 txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT; 1703 1704 flags |= RT2661_TX_LONG_RETRY | RT2661_TX_IFS_SIFS; 1705 } 1706 1707 data = &txq->data[txq->cur]; 1708 desc = &txq->desc[txq->cur]; 1709 1710 error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m0, 1711 BUS_DMA_NOWAIT); 1712 if (error != 0 && error != EFBIG) { 1713 aprint_error_dev(&sc->sc_dev, "could not map mbuf (error %d)\n", 1714 error); 1715 m_freem(m0); 1716 return error; 1717 } 1718 if (error != 0) { 1719 /* too many fragments, linearize */ 1720 1721 MGETHDR(mnew, M_DONTWAIT, MT_DATA); 1722 if (mnew == NULL) { 1723 m_freem(m0); 1724 return ENOMEM; 1725 } 1726 1727 M_COPY_PKTHDR(mnew, m0); 1728 if (m0->m_pkthdr.len > MHLEN) { 1729 MCLGET(mnew, M_DONTWAIT); 1730 if (!(mnew->m_flags & M_EXT)) { 1731 m_freem(m0); 1732 m_freem(mnew); 1733 return ENOMEM; 1734 } 1735 } 1736 1737 m_copydata(m0, 0, m0->m_pkthdr.len, mtod(mnew, void *)); 1738 m_freem(m0); 1739 mnew->m_len = mnew->m_pkthdr.len; 1740 m0 = mnew; 1741 1742 error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m0, 1743 BUS_DMA_NOWAIT); 1744 if (error != 0) { 1745 aprint_error_dev(&sc->sc_dev, "could not map mbuf (error %d)\n", error); 1746 m_freem(m0); 1747 return error; 1748 } 1749 1750 /* packet header have moved, reset our local pointer */ 1751 wh = mtod(m0, struct ieee80211_frame *); 1752 } 1753 1754 #if NBPFILTER > 0 1755 if (sc->sc_drvbpf != NULL) { 1756 struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap; 1757 1758 tap->wt_flags = 0; 1759 tap->wt_rate = rate; 1760 tap->wt_chan_freq = htole16(sc->sc_curchan->ic_freq); 1761 tap->wt_chan_flags = htole16(sc->sc_curchan->ic_flags); 1762 1763 bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m0); 1764 } 1765 #endif 1766 1767 data->m = m0; 1768 data->ni = ni; 1769 1770 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1771 flags |= RT2661_TX_NEED_ACK; 1772 1773 dur = rt2661_txtime(RAL_ACK_SIZE, rt2661_ack_rate(ic, rate), 1774 ic->ic_flags) + sc->sifs; 1775 *(uint16_t *)wh->i_dur = htole16(dur); 1776 } 1777 1778 rt2661_setup_tx_desc(sc, desc, flags, 0, m0->m_pkthdr.len, rate, 1779 data->map->dm_segs, data->map->dm_nsegs, ac); 1780 1781 bus_dmamap_sync(sc->sc_dmat, data->map, 0, data->map->dm_mapsize, 1782 BUS_DMASYNC_PREWRITE); 1783 bus_dmamap_sync(sc->sc_dmat, txq->map, txq->cur * RT2661_TX_DESC_SIZE, 1784 RT2661_TX_DESC_SIZE, BUS_DMASYNC_PREWRITE); 1785 1786 DPRINTFN(10, ("sending data frame len=%u idx=%u rate=%u\n", 1787 m0->m_pkthdr.len, txq->cur, rate)); 1788 1789 /* kick Tx */ 1790 txq->queued++; 1791 txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT; 1792 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 1); 1793 1794 return 0; 1795 } 1796 1797 static void 1798 rt2661_start(struct ifnet *ifp) 1799 { 1800 struct rt2661_softc *sc = ifp->if_softc; 1801 struct ieee80211com *ic = &sc->sc_ic; 1802 struct mbuf *m0; 1803 struct ether_header *eh; 1804 struct ieee80211_node *ni = NULL; 1805 1806 /* 1807 * net80211 may still try to send management frames even if the 1808 * IFF_RUNNING flag is not set... 1809 */ 1810 if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING) 1811 return; 1812 1813 for (;;) { 1814 IF_POLL(&ic->ic_mgtq, m0); 1815 if (m0 != NULL) { 1816 if (sc->mgtq.queued >= RT2661_MGT_RING_COUNT) { 1817 ifp->if_flags |= IFF_OACTIVE; 1818 break; 1819 } 1820 IF_DEQUEUE(&ic->ic_mgtq, m0); 1821 if (m0 == NULL) 1822 break; 1823 1824 ni = (struct ieee80211_node *)m0->m_pkthdr.rcvif; 1825 m0->m_pkthdr.rcvif = NULL; 1826 #if NBPFILTER > 0 1827 if (ic->ic_rawbpf != NULL) 1828 bpf_mtap(ic->ic_rawbpf, m0); 1829 #endif 1830 if (rt2661_tx_mgt(sc, m0, ni) != 0) 1831 break; 1832 1833 } else { 1834 IF_POLL(&ifp->if_snd, m0); 1835 if (m0 == NULL || ic->ic_state != IEEE80211_S_RUN) 1836 break; 1837 1838 if (sc->txq[0].queued >= RT2661_TX_RING_COUNT - 1) { 1839 /* there is no place left in this ring */ 1840 ifp->if_flags |= IFF_OACTIVE; 1841 break; 1842 } 1843 1844 IFQ_DEQUEUE(&ifp->if_snd, m0); 1845 1846 if (m0->m_len < sizeof (struct ether_header) && 1847 !(m0 = m_pullup(m0, sizeof (struct ether_header)))) 1848 continue; 1849 1850 eh = mtod(m0, struct ether_header *); 1851 ni = ieee80211_find_txnode(ic, eh->ether_dhost); 1852 if (ni == NULL) { 1853 m_freem(m0); 1854 ifp->if_oerrors++; 1855 continue; 1856 } 1857 1858 #if NBPFILTER > 0 1859 if (ifp->if_bpf != NULL) 1860 bpf_mtap(ifp->if_bpf, m0); 1861 #endif 1862 m0 = ieee80211_encap(ic, m0, ni); 1863 if (m0 == NULL) { 1864 ieee80211_free_node(ni); 1865 ifp->if_oerrors++; 1866 continue; 1867 } 1868 #if NBPFILTER > 0 1869 if (ic->ic_rawbpf != NULL) 1870 bpf_mtap(ic->ic_rawbpf, m0); 1871 #endif 1872 if (rt2661_tx_data(sc, m0, ni, 0) != 0) { 1873 if (ni != NULL) 1874 ieee80211_free_node(ni); 1875 ifp->if_oerrors++; 1876 break; 1877 } 1878 } 1879 1880 sc->sc_tx_timer = 5; 1881 ifp->if_timer = 1; 1882 } 1883 } 1884 1885 static void 1886 rt2661_watchdog(struct ifnet *ifp) 1887 { 1888 struct rt2661_softc *sc = ifp->if_softc; 1889 1890 ifp->if_timer = 0; 1891 1892 if (sc->sc_tx_timer > 0) { 1893 if (--sc->sc_tx_timer == 0) { 1894 aprint_error_dev(&sc->sc_dev, "device timeout\n"); 1895 rt2661_init(ifp); 1896 ifp->if_oerrors++; 1897 return; 1898 } 1899 ifp->if_timer = 1; 1900 } 1901 1902 ieee80211_watchdog(&sc->sc_ic); 1903 } 1904 1905 /* 1906 * This function allows for fast channel switching in monitor mode (used by 1907 * kismet). In IBSS mode, we must explicitly reset the interface to 1908 * generate a new beacon frame. 1909 */ 1910 static int 1911 rt2661_reset(struct ifnet *ifp) 1912 { 1913 struct rt2661_softc *sc = ifp->if_softc; 1914 struct ieee80211com *ic = &sc->sc_ic; 1915 1916 if (ic->ic_opmode != IEEE80211_M_MONITOR) 1917 return ENETRESET; 1918 1919 rt2661_set_chan(sc, ic->ic_curchan); 1920 1921 return 0; 1922 } 1923 1924 static int 1925 rt2661_ioctl(struct ifnet *ifp, u_long cmd, void *data) 1926 { 1927 struct rt2661_softc *sc = ifp->if_softc; 1928 struct ieee80211com *ic = &sc->sc_ic; 1929 int s, error = 0; 1930 1931 s = splnet(); 1932 1933 switch (cmd) { 1934 case SIOCSIFFLAGS: 1935 if ((error = ifioctl_common(ifp, cmd, data)) != 0) 1936 break; 1937 if (ifp->if_flags & IFF_UP) { 1938 if (ifp->if_flags & IFF_RUNNING) 1939 rt2661_update_promisc(sc); 1940 else 1941 rt2661_init(ifp); 1942 } else { 1943 if (ifp->if_flags & IFF_RUNNING) 1944 rt2661_stop(ifp, 1); 1945 } 1946 break; 1947 1948 case SIOCADDMULTI: 1949 case SIOCDELMULTI: 1950 /* XXX no h/w multicast filter? --dyoung */ 1951 if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) 1952 error = 0; 1953 break; 1954 1955 case SIOCS80211CHANNEL: 1956 /* 1957 * This allows for fast channel switching in monitor mode 1958 * (used by kismet). In IBSS mode, we must explicitly reset 1959 * the interface to generate a new beacon frame. 1960 */ 1961 error = ieee80211_ioctl(ic, cmd, data); 1962 if (error == ENETRESET && 1963 ic->ic_opmode == IEEE80211_M_MONITOR) { 1964 if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == 1965 (IFF_UP | IFF_RUNNING)) 1966 rt2661_set_chan(sc, ic->ic_ibss_chan); 1967 error = 0; 1968 } 1969 break; 1970 1971 default: 1972 error = ieee80211_ioctl(ic, cmd, data); 1973 1974 } 1975 1976 if (error == ENETRESET) { 1977 if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == 1978 (IFF_UP | IFF_RUNNING)) 1979 rt2661_init(ifp); 1980 error = 0; 1981 } 1982 1983 splx(s); 1984 1985 return error; 1986 } 1987 1988 static void 1989 rt2661_bbp_write(struct rt2661_softc *sc, uint8_t reg, uint8_t val) 1990 { 1991 uint32_t tmp; 1992 int ntries; 1993 1994 for (ntries = 0; ntries < 100; ntries++) { 1995 if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY)) 1996 break; 1997 DELAY(1); 1998 } 1999 if (ntries == 100) { 2000 aprint_error_dev(&sc->sc_dev, "could not write to BBP\n"); 2001 return; 2002 } 2003 2004 tmp = RT2661_BBP_BUSY | (reg & 0x7f) << 8 | val; 2005 RAL_WRITE(sc, RT2661_PHY_CSR3, tmp); 2006 2007 DPRINTFN(15, ("BBP R%u <- 0x%02x\n", reg, val)); 2008 } 2009 2010 static uint8_t 2011 rt2661_bbp_read(struct rt2661_softc *sc, uint8_t reg) 2012 { 2013 uint32_t val; 2014 int ntries; 2015 2016 for (ntries = 0; ntries < 100; ntries++) { 2017 if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY)) 2018 break; 2019 DELAY(1); 2020 } 2021 if (ntries == 100) { 2022 aprint_error_dev(&sc->sc_dev, "could not read from BBP\n"); 2023 return 0; 2024 } 2025 2026 val = RT2661_BBP_BUSY | RT2661_BBP_READ | reg << 8; 2027 RAL_WRITE(sc, RT2661_PHY_CSR3, val); 2028 2029 for (ntries = 0; ntries < 100; ntries++) { 2030 val = RAL_READ(sc, RT2661_PHY_CSR3); 2031 if (!(val & RT2661_BBP_BUSY)) 2032 return val & 0xff; 2033 DELAY(1); 2034 } 2035 2036 aprint_error_dev(&sc->sc_dev, "could not read from BBP\n"); 2037 return 0; 2038 } 2039 2040 static void 2041 rt2661_rf_write(struct rt2661_softc *sc, uint8_t reg, uint32_t val) 2042 { 2043 uint32_t tmp; 2044 int ntries; 2045 2046 for (ntries = 0; ntries < 100; ntries++) { 2047 if (!(RAL_READ(sc, RT2661_PHY_CSR4) & RT2661_RF_BUSY)) 2048 break; 2049 DELAY(1); 2050 } 2051 if (ntries == 100) { 2052 aprint_error_dev(&sc->sc_dev, "could not write to RF\n"); 2053 return; 2054 } 2055 tmp = RT2661_RF_BUSY | RT2661_RF_21BIT | (val & 0x1fffff) << 2 | 2056 (reg & 3); 2057 RAL_WRITE(sc, RT2661_PHY_CSR4, tmp); 2058 2059 /* remember last written value in sc */ 2060 sc->rf_regs[reg] = val; 2061 2062 DPRINTFN(15, ("RF R[%u] <- 0x%05x\n", reg & 3, val & 0x1fffff)); 2063 } 2064 2065 static int 2066 rt2661_tx_cmd(struct rt2661_softc *sc, uint8_t cmd, uint16_t arg) 2067 { 2068 if (RAL_READ(sc, RT2661_H2M_MAILBOX_CSR) & RT2661_H2M_BUSY) 2069 return EIO; /* there is already a command pending */ 2070 2071 RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR, 2072 RT2661_H2M_BUSY | RT2661_TOKEN_NO_INTR << 16 | arg); 2073 2074 RAL_WRITE(sc, RT2661_HOST_CMD_CSR, RT2661_KICK_CMD | cmd); 2075 2076 return 0; 2077 } 2078 2079 static void 2080 rt2661_select_antenna(struct rt2661_softc *sc) 2081 { 2082 uint8_t bbp4, bbp77; 2083 uint32_t tmp; 2084 2085 bbp4 = rt2661_bbp_read(sc, 4); 2086 bbp77 = rt2661_bbp_read(sc, 77); 2087 2088 /* TBD */ 2089 2090 /* make sure Rx is disabled before switching antenna */ 2091 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2092 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 2093 2094 rt2661_bbp_write(sc, 4, bbp4); 2095 rt2661_bbp_write(sc, 77, bbp77); 2096 2097 /* restore Rx filter */ 2098 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2099 } 2100 2101 /* 2102 * Enable multi-rate retries for frames sent at OFDM rates. 2103 * In 802.11b/g mode, allow fallback to CCK rates. 2104 */ 2105 static void 2106 rt2661_enable_mrr(struct rt2661_softc *sc) 2107 { 2108 struct ieee80211com *ic = &sc->sc_ic; 2109 uint32_t tmp; 2110 2111 tmp = RAL_READ(sc, RT2661_TXRX_CSR4); 2112 2113 tmp &= ~RT2661_MRR_CCK_FALLBACK; 2114 if (!IEEE80211_IS_CHAN_5GHZ(ic->ic_bss->ni_chan)) 2115 tmp |= RT2661_MRR_CCK_FALLBACK; 2116 tmp |= RT2661_MRR_ENABLED; 2117 2118 RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp); 2119 } 2120 2121 static void 2122 rt2661_set_txpreamble(struct rt2661_softc *sc) 2123 { 2124 uint32_t tmp; 2125 2126 tmp = RAL_READ(sc, RT2661_TXRX_CSR4); 2127 2128 tmp &= ~RT2661_SHORT_PREAMBLE; 2129 if (sc->sc_ic.ic_flags & IEEE80211_F_SHPREAMBLE) 2130 tmp |= RT2661_SHORT_PREAMBLE; 2131 2132 RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp); 2133 } 2134 2135 static void 2136 rt2661_set_basicrates(struct rt2661_softc *sc, 2137 const struct ieee80211_rateset *rs) 2138 { 2139 #define RV(r) ((r) & IEEE80211_RATE_VAL) 2140 uint32_t mask = 0; 2141 uint8_t rate; 2142 int i, j; 2143 2144 for (i = 0; i < rs->rs_nrates; i++) { 2145 rate = rs->rs_rates[i]; 2146 2147 if (!(rate & IEEE80211_RATE_BASIC)) 2148 continue; 2149 2150 /* 2151 * Find h/w rate index. We know it exists because the rate 2152 * set has already been negotiated. 2153 */ 2154 for (j = 0; rt2661_rateset_11g.rs_rates[j] != RV(rate); j++); 2155 2156 mask |= 1 << j; 2157 } 2158 2159 RAL_WRITE(sc, RT2661_TXRX_CSR5, mask); 2160 2161 DPRINTF(("Setting basic rate mask to 0x%x\n", mask)); 2162 #undef RV 2163 } 2164 2165 /* 2166 * Reprogram MAC/BBP to switch to a new band. Values taken from the reference 2167 * driver. 2168 */ 2169 static void 2170 rt2661_select_band(struct rt2661_softc *sc, struct ieee80211_channel *c) 2171 { 2172 uint8_t bbp17, bbp35, bbp96, bbp97, bbp98, bbp104; 2173 uint32_t tmp; 2174 2175 /* update all BBP registers that depend on the band */ 2176 bbp17 = 0x20; bbp96 = 0x48; bbp104 = 0x2c; 2177 bbp35 = 0x50; bbp97 = 0x48; bbp98 = 0x48; 2178 if (IEEE80211_IS_CHAN_5GHZ(c)) { 2179 bbp17 += 0x08; bbp96 += 0x10; bbp104 += 0x0c; 2180 bbp35 += 0x10; bbp97 += 0x10; bbp98 += 0x10; 2181 } 2182 if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) || 2183 (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) { 2184 bbp17 += 0x10; bbp96 += 0x10; bbp104 += 0x10; 2185 } 2186 2187 sc->bbp17 = bbp17; 2188 rt2661_bbp_write(sc, 17, bbp17); 2189 rt2661_bbp_write(sc, 96, bbp96); 2190 rt2661_bbp_write(sc, 104, bbp104); 2191 2192 if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) || 2193 (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) { 2194 rt2661_bbp_write(sc, 75, 0x80); 2195 rt2661_bbp_write(sc, 86, 0x80); 2196 rt2661_bbp_write(sc, 88, 0x80); 2197 } 2198 2199 rt2661_bbp_write(sc, 35, bbp35); 2200 rt2661_bbp_write(sc, 97, bbp97); 2201 rt2661_bbp_write(sc, 98, bbp98); 2202 2203 tmp = RAL_READ(sc, RT2661_PHY_CSR0); 2204 tmp &= ~(RT2661_PA_PE_2GHZ | RT2661_PA_PE_5GHZ); 2205 if (IEEE80211_IS_CHAN_2GHZ(c)) 2206 tmp |= RT2661_PA_PE_2GHZ; 2207 else 2208 tmp |= RT2661_PA_PE_5GHZ; 2209 RAL_WRITE(sc, RT2661_PHY_CSR0, tmp); 2210 2211 /* 802.11a uses a 16 microseconds short interframe space */ 2212 sc->sifs = IEEE80211_IS_CHAN_5GHZ(c) ? 16 : 10; 2213 } 2214 2215 static void 2216 rt2661_set_chan(struct rt2661_softc *sc, struct ieee80211_channel *c) 2217 { 2218 struct ieee80211com *ic = &sc->sc_ic; 2219 const struct rfprog *rfprog; 2220 uint8_t bbp3, bbp94 = RT2661_BBPR94_DEFAULT; 2221 int8_t power; 2222 u_int i, chan; 2223 2224 chan = ieee80211_chan2ieee(ic, c); 2225 if (chan == 0 || chan == IEEE80211_CHAN_ANY) 2226 return; 2227 2228 /* select the appropriate RF settings based on what EEPROM says */ 2229 rfprog = (sc->rfprog == 0) ? rt2661_rf5225_1 : rt2661_rf5225_2; 2230 2231 /* find the settings for this channel (we know it exists) */ 2232 for (i = 0; rfprog[i].chan != chan; i++); 2233 2234 power = sc->txpow[i]; 2235 if (power < 0) { 2236 bbp94 += power; 2237 power = 0; 2238 } else if (power > 31) { 2239 bbp94 += power - 31; 2240 power = 31; 2241 } 2242 2243 /* 2244 * If we've yet to select a channel, or we are switching from the 2245 * 2GHz band to the 5GHz band or vice-versa, BBP registers need to 2246 * be reprogrammed. 2247 */ 2248 if (sc->sc_curchan == NULL || c->ic_flags != sc->sc_curchan->ic_flags) { 2249 rt2661_select_band(sc, c); 2250 rt2661_select_antenna(sc); 2251 } 2252 sc->sc_curchan = c; 2253 2254 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 2255 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 2256 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7); 2257 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 2258 2259 DELAY(200); 2260 2261 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 2262 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 2263 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7 | 1); 2264 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 2265 2266 DELAY(200); 2267 2268 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 2269 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 2270 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7); 2271 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 2272 2273 /* enable smart mode for MIMO-capable RFs */ 2274 bbp3 = rt2661_bbp_read(sc, 3); 2275 2276 bbp3 &= ~RT2661_SMART_MODE; 2277 if (sc->rf_rev == RT2661_RF_5325 || sc->rf_rev == RT2661_RF_2529) 2278 bbp3 |= RT2661_SMART_MODE; 2279 2280 rt2661_bbp_write(sc, 3, bbp3); 2281 2282 if (bbp94 != RT2661_BBPR94_DEFAULT) 2283 rt2661_bbp_write(sc, 94, bbp94); 2284 2285 /* 5GHz radio needs a 1ms delay here */ 2286 if (IEEE80211_IS_CHAN_5GHZ(c)) 2287 DELAY(1000); 2288 } 2289 2290 static void 2291 rt2661_set_bssid(struct rt2661_softc *sc, const uint8_t *bssid) 2292 { 2293 uint32_t tmp; 2294 2295 tmp = bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24; 2296 RAL_WRITE(sc, RT2661_MAC_CSR4, tmp); 2297 2298 tmp = bssid[4] | bssid[5] << 8 | RT2661_ONE_BSSID << 16; 2299 RAL_WRITE(sc, RT2661_MAC_CSR5, tmp); 2300 } 2301 2302 static void 2303 rt2661_set_macaddr(struct rt2661_softc *sc, const uint8_t *addr) 2304 { 2305 uint32_t tmp; 2306 2307 tmp = addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24; 2308 RAL_WRITE(sc, RT2661_MAC_CSR2, tmp); 2309 2310 tmp = addr[4] | addr[5] << 8 | 0xff << 16; 2311 RAL_WRITE(sc, RT2661_MAC_CSR3, tmp); 2312 } 2313 2314 static void 2315 rt2661_update_promisc(struct rt2661_softc *sc) 2316 { 2317 struct ifnet *ifp = sc->sc_ic.ic_ifp; 2318 uint32_t tmp; 2319 2320 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2321 2322 tmp &= ~RT2661_DROP_NOT_TO_ME; 2323 if (!(ifp->if_flags & IFF_PROMISC)) 2324 tmp |= RT2661_DROP_NOT_TO_ME; 2325 2326 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2327 2328 DPRINTF(("%s promiscuous mode\n", (ifp->if_flags & IFF_PROMISC) ? 2329 "entering" : "leaving")); 2330 } 2331 2332 #if 0 2333 /* 2334 * Update QoS (802.11e) settings for each h/w Tx ring. 2335 */ 2336 static int 2337 rt2661_wme_update(struct ieee80211com *ic) 2338 { 2339 struct rt2661_softc *sc = ic->ic_ifp->if_softc; 2340 const struct wmeParams *wmep; 2341 2342 wmep = ic->ic_wme.wme_chanParams.cap_wmeParams; 2343 2344 /* XXX: not sure about shifts. */ 2345 /* XXX: the reference driver plays with AC_VI settings too. */ 2346 2347 /* update TxOp */ 2348 RAL_WRITE(sc, RT2661_AC_TXOP_CSR0, 2349 wmep[WME_AC_BE].wmep_txopLimit << 16 | 2350 wmep[WME_AC_BK].wmep_txopLimit); 2351 RAL_WRITE(sc, RT2661_AC_TXOP_CSR1, 2352 wmep[WME_AC_VI].wmep_txopLimit << 16 | 2353 wmep[WME_AC_VO].wmep_txopLimit); 2354 2355 /* update CWmin */ 2356 RAL_WRITE(sc, RT2661_CWMIN_CSR, 2357 wmep[WME_AC_BE].wmep_logcwmin << 12 | 2358 wmep[WME_AC_BK].wmep_logcwmin << 8 | 2359 wmep[WME_AC_VI].wmep_logcwmin << 4 | 2360 wmep[WME_AC_VO].wmep_logcwmin); 2361 2362 /* update CWmax */ 2363 RAL_WRITE(sc, RT2661_CWMAX_CSR, 2364 wmep[WME_AC_BE].wmep_logcwmax << 12 | 2365 wmep[WME_AC_BK].wmep_logcwmax << 8 | 2366 wmep[WME_AC_VI].wmep_logcwmax << 4 | 2367 wmep[WME_AC_VO].wmep_logcwmax); 2368 2369 /* update Aifsn */ 2370 RAL_WRITE(sc, RT2661_AIFSN_CSR, 2371 wmep[WME_AC_BE].wmep_aifsn << 12 | 2372 wmep[WME_AC_BK].wmep_aifsn << 8 | 2373 wmep[WME_AC_VI].wmep_aifsn << 4 | 2374 wmep[WME_AC_VO].wmep_aifsn); 2375 2376 return 0; 2377 } 2378 #endif 2379 2380 static void 2381 rt2661_updateslot(struct ifnet *ifp) 2382 { 2383 struct rt2661_softc *sc = ifp->if_softc; 2384 struct ieee80211com *ic = &sc->sc_ic; 2385 2386 if (ic->ic_opmode == IEEE80211_M_HOSTAP) { 2387 /* 2388 * In HostAP mode, we defer setting of new slot time until 2389 * updated ERP Information Element has propagated to all 2390 * associated STAs. 2391 */ 2392 sc->sc_flags |= RT2661_UPDATE_SLOT; 2393 } else 2394 rt2661_set_slottime(sc); 2395 } 2396 2397 static void 2398 rt2661_set_slottime(struct rt2661_softc *sc) 2399 { 2400 struct ieee80211com *ic = &sc->sc_ic; 2401 uint8_t slottime; 2402 uint32_t tmp; 2403 2404 slottime = (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20; 2405 2406 tmp = RAL_READ(sc, RT2661_MAC_CSR9); 2407 tmp = (tmp & ~0xff) | slottime; 2408 RAL_WRITE(sc, RT2661_MAC_CSR9, tmp); 2409 2410 DPRINTF(("setting slot time to %uus\n", slottime)); 2411 } 2412 2413 static const char * 2414 rt2661_get_rf(int rev) 2415 { 2416 switch (rev) { 2417 case RT2661_RF_5225: return "RT5225"; 2418 case RT2661_RF_5325: return "RT5325 (MIMO XR)"; 2419 case RT2661_RF_2527: return "RT2527"; 2420 case RT2661_RF_2529: return "RT2529 (MIMO XR)"; 2421 default: return "unknown"; 2422 } 2423 } 2424 2425 static void 2426 rt2661_read_eeprom(struct rt2661_softc *sc) 2427 { 2428 struct ieee80211com *ic = &sc->sc_ic; 2429 uint16_t val; 2430 int i; 2431 2432 /* read MAC address */ 2433 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC01); 2434 ic->ic_myaddr[0] = val & 0xff; 2435 ic->ic_myaddr[1] = val >> 8; 2436 2437 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC23); 2438 ic->ic_myaddr[2] = val & 0xff; 2439 ic->ic_myaddr[3] = val >> 8; 2440 2441 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC45); 2442 ic->ic_myaddr[4] = val & 0xff; 2443 ic->ic_myaddr[5] = val >> 8; 2444 2445 val = rt2661_eeprom_read(sc, RT2661_EEPROM_ANTENNA); 2446 /* XXX: test if different from 0xffff? */ 2447 sc->rf_rev = (val >> 11) & 0x1f; 2448 sc->hw_radio = (val >> 10) & 0x1; 2449 sc->rx_ant = (val >> 4) & 0x3; 2450 sc->tx_ant = (val >> 2) & 0x3; 2451 sc->nb_ant = val & 0x3; 2452 2453 DPRINTF(("RF revision=%d\n", sc->rf_rev)); 2454 2455 val = rt2661_eeprom_read(sc, RT2661_EEPROM_CONFIG2); 2456 sc->ext_5ghz_lna = (val >> 6) & 0x1; 2457 sc->ext_2ghz_lna = (val >> 4) & 0x1; 2458 2459 DPRINTF(("External 2GHz LNA=%d\nExternal 5GHz LNA=%d\n", 2460 sc->ext_2ghz_lna, sc->ext_5ghz_lna)); 2461 2462 val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_2GHZ_OFFSET); 2463 if ((val & 0xff) != 0xff) 2464 sc->rssi_2ghz_corr = (int8_t)(val & 0xff); /* signed */ 2465 2466 val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_5GHZ_OFFSET); 2467 if ((val & 0xff) != 0xff) 2468 sc->rssi_5ghz_corr = (int8_t)(val & 0xff); /* signed */ 2469 2470 /* adjust RSSI correction for external low-noise amplifier */ 2471 if (sc->ext_2ghz_lna) 2472 sc->rssi_2ghz_corr -= 14; 2473 if (sc->ext_5ghz_lna) 2474 sc->rssi_5ghz_corr -= 14; 2475 2476 DPRINTF(("RSSI 2GHz corr=%d\nRSSI 5GHz corr=%d\n", 2477 sc->rssi_2ghz_corr, sc->rssi_5ghz_corr)); 2478 2479 val = rt2661_eeprom_read(sc, RT2661_EEPROM_FREQ_OFFSET); 2480 if ((val >> 8) != 0xff) 2481 sc->rfprog = (val >> 8) & 0x3; 2482 if ((val & 0xff) != 0xff) 2483 sc->rffreq = val & 0xff; 2484 2485 DPRINTF(("RF prog=%d\nRF freq=%d\n", sc->rfprog, sc->rffreq)); 2486 2487 /* read Tx power for all a/b/g channels */ 2488 for (i = 0; i < 19; i++) { 2489 val = rt2661_eeprom_read(sc, RT2661_EEPROM_TXPOWER + i); 2490 sc->txpow[i * 2] = (int8_t)(val >> 8); /* signed */ 2491 DPRINTF(("Channel=%d Tx power=%d\n", 2492 rt2661_rf5225_1[i * 2].chan, sc->txpow[i * 2])); 2493 sc->txpow[i * 2 + 1] = (int8_t)(val & 0xff); /* signed */ 2494 DPRINTF(("Channel=%d Tx power=%d\n", 2495 rt2661_rf5225_1[i * 2 + 1].chan, sc->txpow[i * 2 + 1])); 2496 } 2497 2498 /* read vendor-specific BBP values */ 2499 for (i = 0; i < 16; i++) { 2500 val = rt2661_eeprom_read(sc, RT2661_EEPROM_BBP_BASE + i); 2501 if (val == 0 || val == 0xffff) 2502 continue; /* skip invalid entries */ 2503 sc->bbp_prom[i].reg = val >> 8; 2504 sc->bbp_prom[i].val = val & 0xff; 2505 DPRINTF(("BBP R%d=%02x\n", sc->bbp_prom[i].reg, 2506 sc->bbp_prom[i].val)); 2507 } 2508 } 2509 2510 static int 2511 rt2661_bbp_init(struct rt2661_softc *sc) 2512 { 2513 #define N(a) (sizeof (a) / sizeof ((a)[0])) 2514 int i, ntries; 2515 uint8_t val; 2516 2517 /* wait for BBP to be ready */ 2518 for (ntries = 0; ntries < 100; ntries++) { 2519 val = rt2661_bbp_read(sc, 0); 2520 if (val != 0 && val != 0xff) 2521 break; 2522 DELAY(100); 2523 } 2524 if (ntries == 100) { 2525 aprint_error_dev(&sc->sc_dev, "timeout waiting for BBP\n"); 2526 return EIO; 2527 } 2528 2529 /* initialize BBP registers to default values */ 2530 for (i = 0; i < N(rt2661_def_bbp); i++) { 2531 rt2661_bbp_write(sc, rt2661_def_bbp[i].reg, 2532 rt2661_def_bbp[i].val); 2533 } 2534 2535 /* write vendor-specific BBP values (from EEPROM) */ 2536 for (i = 0; i < 16; i++) { 2537 if (sc->bbp_prom[i].reg == 0) 2538 continue; 2539 rt2661_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val); 2540 } 2541 2542 return 0; 2543 #undef N 2544 } 2545 2546 static int 2547 rt2661_init(struct ifnet *ifp) 2548 { 2549 #define N(a) (sizeof (a) / sizeof ((a)[0])) 2550 struct rt2661_softc *sc = ifp->if_softc; 2551 struct ieee80211com *ic = &sc->sc_ic; 2552 const char *name = NULL; /* make lint happy */ 2553 uint8_t *ucode; 2554 size_t size; 2555 uint32_t tmp, star[3]; 2556 int i, ntries; 2557 firmware_handle_t fh; 2558 2559 /* for CardBus, power on the socket */ 2560 if (!(sc->sc_flags & RT2661_ENABLED)) { 2561 if (sc->sc_enable != NULL && (*sc->sc_enable)(sc) != 0) { 2562 aprint_error_dev(&sc->sc_dev, "could not enable device\n"); 2563 return EIO; 2564 } 2565 sc->sc_flags |= RT2661_ENABLED; 2566 } 2567 2568 rt2661_stop(ifp, 0); 2569 2570 if (!(sc->sc_flags & RT2661_FWLOADED)) { 2571 switch (sc->sc_id) { 2572 case PCI_PRODUCT_RALINK_RT2561: 2573 name = "ral-rt2561"; 2574 break; 2575 case PCI_PRODUCT_RALINK_RT2561S: 2576 name = "ral-rt2561s"; 2577 break; 2578 case PCI_PRODUCT_RALINK_RT2661: 2579 name = "ral-rt2661"; 2580 break; 2581 } 2582 2583 if (firmware_open("ral", name, &fh) != 0) { 2584 aprint_error_dev(&sc->sc_dev, "could not open microcode %s\n", name); 2585 rt2661_stop(ifp, 1); 2586 return EIO; 2587 } 2588 2589 size = firmware_get_size(fh); 2590 if (!(ucode = firmware_malloc(size))) { 2591 aprint_error_dev(&sc->sc_dev, "could not alloc microcode memory\n"); 2592 firmware_close(fh); 2593 rt2661_stop(ifp, 1); 2594 return ENOMEM; 2595 } 2596 2597 if (firmware_read(fh, 0, ucode, size) != 0) { 2598 aprint_error_dev(&sc->sc_dev, "could not read microcode %s\n", name); 2599 firmware_free(ucode, 0); 2600 firmware_close(fh); 2601 rt2661_stop(ifp, 1); 2602 return EIO; 2603 } 2604 2605 if (rt2661_load_microcode(sc, ucode, size) != 0) { 2606 aprint_error_dev(&sc->sc_dev, "could not load 8051 microcode\n"); 2607 firmware_free(ucode, 0); 2608 firmware_close(fh); 2609 rt2661_stop(ifp, 1); 2610 return EIO; 2611 } 2612 2613 firmware_free(ucode, 0); 2614 firmware_close(fh); 2615 sc->sc_flags |= RT2661_FWLOADED; 2616 } 2617 2618 /* initialize Tx rings */ 2619 RAL_WRITE(sc, RT2661_AC1_BASE_CSR, sc->txq[1].physaddr); 2620 RAL_WRITE(sc, RT2661_AC0_BASE_CSR, sc->txq[0].physaddr); 2621 RAL_WRITE(sc, RT2661_AC2_BASE_CSR, sc->txq[2].physaddr); 2622 RAL_WRITE(sc, RT2661_AC3_BASE_CSR, sc->txq[3].physaddr); 2623 2624 /* initialize Mgt ring */ 2625 RAL_WRITE(sc, RT2661_MGT_BASE_CSR, sc->mgtq.physaddr); 2626 2627 /* initialize Rx ring */ 2628 RAL_WRITE(sc, RT2661_RX_BASE_CSR, sc->rxq.physaddr); 2629 2630 /* initialize Tx rings sizes */ 2631 RAL_WRITE(sc, RT2661_TX_RING_CSR0, 2632 RT2661_TX_RING_COUNT << 24 | 2633 RT2661_TX_RING_COUNT << 16 | 2634 RT2661_TX_RING_COUNT << 8 | 2635 RT2661_TX_RING_COUNT); 2636 2637 RAL_WRITE(sc, RT2661_TX_RING_CSR1, 2638 RT2661_TX_DESC_WSIZE << 16 | 2639 RT2661_TX_RING_COUNT << 8 | /* XXX: HCCA ring unused */ 2640 RT2661_MGT_RING_COUNT); 2641 2642 /* initialize Rx rings */ 2643 RAL_WRITE(sc, RT2661_RX_RING_CSR, 2644 RT2661_RX_DESC_BACK << 16 | 2645 RT2661_RX_DESC_WSIZE << 8 | 2646 RT2661_RX_RING_COUNT); 2647 2648 /* XXX: some magic here */ 2649 RAL_WRITE(sc, RT2661_TX_DMA_DST_CSR, 0xaa); 2650 2651 /* load base addresses of all 5 Tx rings (4 data + 1 mgt) */ 2652 RAL_WRITE(sc, RT2661_LOAD_TX_RING_CSR, 0x1f); 2653 2654 /* load base address of Rx ring */ 2655 RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 2); 2656 2657 /* initialize MAC registers to default values */ 2658 for (i = 0; i < N(rt2661_def_mac); i++) 2659 RAL_WRITE(sc, rt2661_def_mac[i].reg, rt2661_def_mac[i].val); 2660 2661 IEEE80211_ADDR_COPY(ic->ic_myaddr, CLLADDR(ifp->if_sadl)); 2662 rt2661_set_macaddr(sc, ic->ic_myaddr); 2663 2664 /* set host ready */ 2665 RAL_WRITE(sc, RT2661_MAC_CSR1, 3); 2666 RAL_WRITE(sc, RT2661_MAC_CSR1, 0); 2667 2668 /* wait for BBP/RF to wakeup */ 2669 for (ntries = 0; ntries < 1000; ntries++) { 2670 if (RAL_READ(sc, RT2661_MAC_CSR12) & 8) 2671 break; 2672 DELAY(1000); 2673 } 2674 if (ntries == 1000) { 2675 printf("timeout waiting for BBP/RF to wakeup\n"); 2676 rt2661_stop(ifp, 1); 2677 return EIO; 2678 } 2679 2680 if (rt2661_bbp_init(sc) != 0) { 2681 rt2661_stop(ifp, 1); 2682 return EIO; 2683 } 2684 2685 /* select default channel */ 2686 sc->sc_curchan = ic->ic_curchan; 2687 rt2661_select_band(sc, sc->sc_curchan); 2688 rt2661_select_antenna(sc); 2689 rt2661_set_chan(sc, sc->sc_curchan); 2690 2691 /* update Rx filter */ 2692 tmp = RAL_READ(sc, RT2661_TXRX_CSR0) & 0xffff; 2693 2694 tmp |= RT2661_DROP_PHY_ERROR | RT2661_DROP_CRC_ERROR; 2695 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 2696 tmp |= RT2661_DROP_CTL | RT2661_DROP_VER_ERROR | 2697 RT2661_DROP_ACKCTS; 2698 if (ic->ic_opmode != IEEE80211_M_HOSTAP) 2699 tmp |= RT2661_DROP_TODS; 2700 if (!(ifp->if_flags & IFF_PROMISC)) 2701 tmp |= RT2661_DROP_NOT_TO_ME; 2702 } 2703 2704 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2705 2706 /* clear STA registers */ 2707 RAL_READ_REGION_4(sc, RT2661_STA_CSR0, star, N(star)); 2708 2709 /* initialize ASIC */ 2710 RAL_WRITE(sc, RT2661_MAC_CSR1, 4); 2711 2712 /* clear any pending interrupt */ 2713 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff); 2714 2715 /* enable interrupts */ 2716 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0x0000ff10); 2717 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0); 2718 2719 /* kick Rx */ 2720 RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 1); 2721 2722 ifp->if_flags &= ~IFF_OACTIVE; 2723 ifp->if_flags |= IFF_RUNNING; 2724 2725 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 2726 if (ic->ic_roaming != IEEE80211_ROAMING_MANUAL) 2727 ieee80211_new_state(ic, IEEE80211_S_SCAN, -1); 2728 } else 2729 ieee80211_new_state(ic, IEEE80211_S_RUN, -1); 2730 2731 return 0; 2732 #undef N 2733 } 2734 2735 static void 2736 rt2661_stop(struct ifnet *ifp, int disable) 2737 { 2738 struct rt2661_softc *sc = ifp->if_softc; 2739 struct ieee80211com *ic = &sc->sc_ic; 2740 uint32_t tmp; 2741 2742 sc->sc_tx_timer = 0; 2743 ifp->if_timer = 0; 2744 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 2745 2746 ieee80211_new_state(ic, IEEE80211_S_INIT, -1); /* free all nodes */ 2747 2748 /* abort Tx (for all 5 Tx rings) */ 2749 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 0x1f << 16); 2750 2751 /* disable Rx (value remains after reset!) */ 2752 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2753 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 2754 2755 /* reset ASIC */ 2756 RAL_WRITE(sc, RT2661_MAC_CSR1, 3); 2757 RAL_WRITE(sc, RT2661_MAC_CSR1, 0); 2758 2759 /* disable interrupts */ 2760 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffff7f); 2761 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff); 2762 2763 /* clear any pending interrupt */ 2764 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff); 2765 RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, 0xffffffff); 2766 2767 /* reset Tx and Rx rings */ 2768 rt2661_reset_tx_ring(sc, &sc->txq[0]); 2769 rt2661_reset_tx_ring(sc, &sc->txq[1]); 2770 rt2661_reset_tx_ring(sc, &sc->txq[2]); 2771 rt2661_reset_tx_ring(sc, &sc->txq[3]); 2772 rt2661_reset_tx_ring(sc, &sc->mgtq); 2773 rt2661_reset_rx_ring(sc, &sc->rxq); 2774 2775 /* for CardBus, power down the socket */ 2776 if (disable && sc->sc_disable != NULL) { 2777 if (sc->sc_flags & RT2661_ENABLED) { 2778 (*sc->sc_disable)(sc); 2779 sc->sc_flags &= ~(RT2661_ENABLED | RT2661_FWLOADED); 2780 } 2781 } 2782 } 2783 2784 static int 2785 rt2661_load_microcode(struct rt2661_softc *sc, const uint8_t *ucode, int size) 2786 { 2787 int ntries; 2788 2789 /* reset 8051 */ 2790 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET); 2791 2792 /* cancel any pending Host to MCU command */ 2793 RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR, 0); 2794 RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff); 2795 RAL_WRITE(sc, RT2661_HOST_CMD_CSR, 0); 2796 2797 /* write 8051's microcode */ 2798 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET | RT2661_MCU_SEL); 2799 RAL_WRITE_REGION_1(sc, RT2661_MCU_CODE_BASE, ucode, size); 2800 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET); 2801 2802 /* kick 8051's ass */ 2803 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, 0); 2804 2805 /* wait for 8051 to initialize */ 2806 for (ntries = 0; ntries < 500; ntries++) { 2807 if (RAL_READ(sc, RT2661_MCU_CNTL_CSR) & RT2661_MCU_READY) 2808 break; 2809 DELAY(100); 2810 } 2811 if (ntries == 500) { 2812 printf("timeout waiting for MCU to initialize\n"); 2813 return EIO; 2814 } 2815 return 0; 2816 } 2817 2818 /* 2819 * Dynamically tune Rx sensitivity (BBP register 17) based on average RSSI and 2820 * false CCA count. This function is called periodically (every seconds) when 2821 * in the RUN state. Values taken from the reference driver. 2822 */ 2823 static void 2824 rt2661_rx_tune(struct rt2661_softc *sc) 2825 { 2826 uint8_t bbp17; 2827 uint16_t cca; 2828 int lo, hi, dbm; 2829 2830 /* 2831 * Tuning range depends on operating band and on the presence of an 2832 * external low-noise amplifier. 2833 */ 2834 lo = 0x20; 2835 if (IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan)) 2836 lo += 0x08; 2837 if ((IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan) && sc->ext_2ghz_lna) || 2838 (IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan) && sc->ext_5ghz_lna)) 2839 lo += 0x10; 2840 hi = lo + 0x20; 2841 2842 dbm = sc->avg_rssi; 2843 /* retrieve false CCA count since last call (clear on read) */ 2844 cca = RAL_READ(sc, RT2661_STA_CSR1) & 0xffff; 2845 2846 DPRINTFN(2, ("RSSI=%ddBm false CCA=%d\n", dbm, cca)); 2847 2848 if (dbm < -74) { 2849 /* very bad RSSI, tune using false CCA count */ 2850 bbp17 = sc->bbp17; /* current value */ 2851 2852 hi -= 2 * (-74 - dbm); 2853 if (hi < lo) 2854 hi = lo; 2855 2856 if (bbp17 > hi) 2857 bbp17 = hi; 2858 else if (cca > 512) 2859 bbp17 = min(bbp17 + 1, hi); 2860 else if (cca < 100) 2861 bbp17 = max(bbp17 - 1, lo); 2862 2863 } else if (dbm < -66) { 2864 bbp17 = lo + 0x08; 2865 } else if (dbm < -58) { 2866 bbp17 = lo + 0x10; 2867 } else if (dbm < -35) { 2868 bbp17 = hi; 2869 } else { /* very good RSSI >= -35dBm */ 2870 bbp17 = 0x60; /* very low sensitivity */ 2871 } 2872 2873 if (bbp17 != sc->bbp17) { 2874 DPRINTF(("BBP17 %x->%x\n", sc->bbp17, bbp17)); 2875 rt2661_bbp_write(sc, 17, bbp17); 2876 sc->bbp17 = bbp17; 2877 } 2878 } 2879 2880 #ifdef notyet 2881 /* 2882 * Enter/Leave radar detection mode. 2883 * This is for 802.11h additional regulatory domains. 2884 */ 2885 static void 2886 rt2661_radar_start(struct rt2661_softc *sc) 2887 { 2888 uint32_t tmp; 2889 2890 /* disable Rx */ 2891 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2892 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 2893 2894 rt2661_bbp_write(sc, 82, 0x20); 2895 rt2661_bbp_write(sc, 83, 0x00); 2896 rt2661_bbp_write(sc, 84, 0x40); 2897 2898 /* save current BBP registers values */ 2899 sc->bbp18 = rt2661_bbp_read(sc, 18); 2900 sc->bbp21 = rt2661_bbp_read(sc, 21); 2901 sc->bbp22 = rt2661_bbp_read(sc, 22); 2902 sc->bbp16 = rt2661_bbp_read(sc, 16); 2903 sc->bbp17 = rt2661_bbp_read(sc, 17); 2904 sc->bbp64 = rt2661_bbp_read(sc, 64); 2905 2906 rt2661_bbp_write(sc, 18, 0xff); 2907 rt2661_bbp_write(sc, 21, 0x3f); 2908 rt2661_bbp_write(sc, 22, 0x3f); 2909 rt2661_bbp_write(sc, 16, 0xbd); 2910 rt2661_bbp_write(sc, 17, sc->ext_5ghz_lna ? 0x44 : 0x34); 2911 rt2661_bbp_write(sc, 64, 0x21); 2912 2913 /* restore Rx filter */ 2914 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2915 } 2916 2917 static int 2918 rt2661_radar_stop(struct rt2661_softc *sc) 2919 { 2920 uint8_t bbp66; 2921 2922 /* read radar detection result */ 2923 bbp66 = rt2661_bbp_read(sc, 66); 2924 2925 /* restore BBP registers values */ 2926 rt2661_bbp_write(sc, 16, sc->bbp16); 2927 rt2661_bbp_write(sc, 17, sc->bbp17); 2928 rt2661_bbp_write(sc, 18, sc->bbp18); 2929 rt2661_bbp_write(sc, 21, sc->bbp21); 2930 rt2661_bbp_write(sc, 22, sc->bbp22); 2931 rt2661_bbp_write(sc, 64, sc->bbp64); 2932 2933 return bbp66 == 1; 2934 } 2935 #endif 2936 2937 static int 2938 rt2661_prepare_beacon(struct rt2661_softc *sc) 2939 { 2940 struct ieee80211com *ic = &sc->sc_ic; 2941 struct ieee80211_node *ni = ic->ic_bss; 2942 struct rt2661_tx_desc desc; 2943 struct mbuf *m0; 2944 struct ieee80211_beacon_offsets bo; 2945 int rate; 2946 2947 m0 = ieee80211_beacon_alloc(ic, ni, &bo); 2948 if (m0 == NULL) { 2949 aprint_error_dev(&sc->sc_dev, "could not allocate beacon frame\n"); 2950 return ENOBUFS; 2951 } 2952 2953 /* send beacons at the lowest available rate */ 2954 rate = IEEE80211_IS_CHAN_5GHZ(ni->ni_chan) ? 12 : 2; 2955 2956 rt2661_setup_tx_desc(sc, &desc, RT2661_TX_TIMESTAMP, RT2661_TX_HWSEQ, 2957 m0->m_pkthdr.len, rate, NULL, 0, RT2661_QID_MGT); 2958 2959 /* copy the first 24 bytes of Tx descriptor into NIC memory */ 2960 RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0, (uint8_t *)&desc, 24); 2961 2962 /* copy beacon header and payload into NIC memory */ 2963 RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0 + 24, 2964 mtod(m0, uint8_t *), m0->m_pkthdr.len); 2965 2966 m_freem(m0); 2967 2968 /* 2969 * Store offset of ERP Information Element so that we can update it 2970 * dynamically when the slot time changes. 2971 * XXX: this is ugly since it depends on how net80211 builds beacon 2972 * frames but ieee80211_beacon_alloc() doesn't store offsets for us. 2973 */ 2974 if (ic->ic_curmode == IEEE80211_MODE_11G) { 2975 sc->erp_csr = 2976 RT2661_HW_BEACON_BASE0 + 24 + 2977 sizeof (struct ieee80211_frame) + 2978 8 + 2 + 2 + 2 + ni->ni_esslen + 2979 2 + min(ni->ni_rates.rs_nrates, IEEE80211_RATE_SIZE) + 2980 2 + 1 + 2981 ((ic->ic_opmode == IEEE80211_M_IBSS) ? 4 : 6) + 2982 2; 2983 } 2984 2985 return 0; 2986 } 2987 2988 /* 2989 * Enable TSF synchronization and tell h/w to start sending beacons for IBSS 2990 * and HostAP operating modes. 2991 */ 2992 static void 2993 rt2661_enable_tsf_sync(struct rt2661_softc *sc) 2994 { 2995 struct ieee80211com *ic = &sc->sc_ic; 2996 uint32_t tmp; 2997 2998 if (ic->ic_opmode != IEEE80211_M_STA) { 2999 /* 3000 * Change default 16ms TBTT adjustment to 8ms. 3001 * Must be done before enabling beacon generation. 3002 */ 3003 RAL_WRITE(sc, RT2661_TXRX_CSR10, 1 << 12 | 8); 3004 } 3005 3006 tmp = RAL_READ(sc, RT2661_TXRX_CSR9) & 0xff000000; 3007 3008 /* set beacon interval (in 1/16ms unit) */ 3009 tmp |= ic->ic_bss->ni_intval * 16; 3010 3011 tmp |= RT2661_TSF_TICKING | RT2661_ENABLE_TBTT; 3012 if (ic->ic_opmode == IEEE80211_M_STA) 3013 tmp |= RT2661_TSF_MODE(1); 3014 else 3015 tmp |= RT2661_TSF_MODE(2) | RT2661_GENERATE_BEACON; 3016 3017 RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp); 3018 } 3019 3020 /* 3021 * Retrieve the "Received Signal Strength Indicator" from the raw values 3022 * contained in Rx descriptors. The computation depends on which band the 3023 * frame was received. Correction values taken from the reference driver. 3024 */ 3025 static int 3026 rt2661_get_rssi(struct rt2661_softc *sc, uint8_t raw) 3027 { 3028 int lna, agc, rssi; 3029 3030 lna = (raw >> 5) & 0x3; 3031 agc = raw & 0x1f; 3032 3033 rssi = 2 * agc; 3034 3035 if (IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan)) { 3036 rssi += sc->rssi_2ghz_corr; 3037 3038 if (lna == 1) 3039 rssi -= 64; 3040 else if (lna == 2) 3041 rssi -= 74; 3042 else if (lna == 3) 3043 rssi -= 90; 3044 } else { 3045 rssi += sc->rssi_5ghz_corr; 3046 3047 if (lna == 1) 3048 rssi -= 64; 3049 else if (lna == 2) 3050 rssi -= 86; 3051 else if (lna == 3) 3052 rssi -= 100; 3053 } 3054 return rssi; 3055 } 3056