xref: /netbsd-src/sys/dev/ic/osiop.c (revision aaf4ece63a859a04e37cf3a7229b5fab0157cc06)
1 /*	$NetBSD: osiop.c,v 1.25 2005/12/11 12:21:28 christos Exp $	*/
2 
3 /*
4  * Copyright (c) 2001 Izumi Tsutsui.  All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  * 3. The name of the author may not be used to endorse or promote products
15  *    derived from this software without specific prior written permission.
16  *
17  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27  */
28 
29 /*
30  * Copyright (c) 1990 The Regents of the University of California.
31  * All rights reserved.
32  *
33  * This code is derived from software contributed to Berkeley by
34  * Van Jacobson of Lawrence Berkeley Laboratory.
35  *
36  * Redistribution and use in source and binary forms, with or without
37  * modification, are permitted provided that the following conditions
38  * are met:
39  * 1. Redistributions of source code must retain the above copyright
40  *    notice, this list of conditions and the following disclaimer.
41  * 2. Redistributions in binary form must reproduce the above copyright
42  *    notice, this list of conditions and the following disclaimer in the
43  *    documentation and/or other materials provided with the distribution.
44  * 3. Neither the name of the University nor the names of its contributors
45  *    may be used to endorse or promote products derived from this software
46  *    without specific prior written permission.
47  *
48  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
49  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
50  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
51  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
52  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
53  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
54  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
55  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
56  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
57  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
58  * SUCH DAMAGE.
59  *
60  *	@(#)siop.c	7.5 (Berkeley) 5/4/91
61  */
62 
63 /*
64  * Copyright (c) 1994 Michael L. Hitch
65  *
66  * This code is derived from software contributed to Berkeley by
67  * Van Jacobson of Lawrence Berkeley Laboratory.
68  *
69  * Redistribution and use in source and binary forms, with or without
70  * modification, are permitted provided that the following conditions
71  * are met:
72  * 1. Redistributions of source code must retain the above copyright
73  *    notice, this list of conditions and the following disclaimer.
74  * 2. Redistributions in binary form must reproduce the above copyright
75  *    notice, this list of conditions and the following disclaimer in the
76  *    documentation and/or other materials provided with the distribution.
77  *
78  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
79  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
80  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
81  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
82  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
83  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
84  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
85  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
86  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
87  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
88  *
89  *	@(#)siop.c	7.5 (Berkeley) 5/4/91
90  */
91 
92 /*
93  * MI NCR53C710 scsi adaptor driver; based on arch/amiga/dev/siop.c:
94  *	NetBSD: siop.c,v 1.43 1999/09/30 22:59:53 thorpej Exp
95  *
96  * bus_space/bus_dma'fied by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
97  *
98  * The 53c710 datasheet is available at:
99  * http://www.lsilogic.com/techlib/techdocs/storage_stand_prod/index.html
100  */
101 
102 #include <sys/cdefs.h>
103 __KERNEL_RCSID(0, "$NetBSD: osiop.c,v 1.25 2005/12/11 12:21:28 christos Exp $");
104 
105 /* #define OSIOP_DEBUG */
106 
107 #include "opt_ddb.h"
108 
109 #include <sys/param.h>
110 #include <sys/systm.h>
111 #include <sys/device.h>
112 #include <sys/malloc.h>
113 #include <sys/buf.h>
114 #include <sys/kernel.h>
115 
116 #include <uvm/uvm_extern.h>
117 
118 #include <dev/scsipi/scsi_all.h>
119 #include <dev/scsipi/scsipi_all.h>
120 #include <dev/scsipi/scsiconf.h>
121 #include <dev/scsipi/scsi_message.h>
122 
123 #include <machine/cpu.h>
124 #include <machine/bus.h>
125 
126 #include <dev/ic/osiopreg.h>
127 #include <dev/ic/osiopvar.h>
128 
129 /* 53C710 script */
130 #include <dev/microcode/siop/osiop.out>
131 
132 void osiop_attach(struct osiop_softc *);
133 void osiop_minphys(struct buf *);
134 void osiop_scsipi_request(struct scsipi_channel *, scsipi_adapter_req_t,
135     void *);
136 void osiop_poll(struct osiop_softc *, struct osiop_acb *);
137 void osiop_sched(struct osiop_softc *);
138 void osiop_scsidone(struct osiop_acb *, int);
139 void osiop_abort(struct osiop_softc *, const char *);
140 void osiop_init(struct osiop_softc *);
141 void osiop_reset(struct osiop_softc *);
142 void osiop_resetbus(struct osiop_softc *);
143 void osiop_start(struct osiop_softc *);
144 int osiop_checkintr(struct osiop_softc *, uint8_t, uint8_t, uint8_t, int *);
145 void osiop_select(struct osiop_softc *);
146 void osiop_update_xfer_mode(struct osiop_softc *, int);
147 void scsi_period_to_osiop(struct osiop_softc *, int);
148 void osiop_timeout(void *);
149 
150 int osiop_reset_delay = 250;	/* delay after reset, in milliseconds */
151 
152 #ifdef OSIOP_DEBUG
153 #define DEBUG_DMA	0x01
154 #define DEBUG_INT	0x02
155 #define DEBUG_PHASE	0x04
156 #define DEBUG_UNEXCEPT	0x08
157 #define DEBUG_DISC	0x10
158 #define DEBUG_CMD	0x20
159 #define DEBUG_ALL	0xff
160 int osiop_debug = 0; /*DEBUG_ALL;*/
161 
162 int osiopsync_debug = 0;
163 int osiopdma_hits = 1;
164 int osiopstarts = 0;
165 int osiopints = 0;
166 int osiopphmm = 0;
167 int osiop_trix = 0;
168 #define OSIOP_TRACE_SIZE	128
169 #define OSIOP_TRACE(a,b,c,d)	do {				\
170 	osiop_trbuf[osiop_trix + 0] = (a);			\
171 	osiop_trbuf[osiop_trix + 1] = (b);			\
172 	osiop_trbuf[osiop_trix + 2] = (c);			\
173 	osiop_trbuf[osiop_trix + 3] = (d);			\
174 	osiop_trix = (osiop_trix + 4) & (OSIOP_TRACE_SIZE - 1);	\
175 } while (0)
176 uint8_t osiop_trbuf[OSIOP_TRACE_SIZE];
177 void osiop_dump_trace(void);
178 void osiop_dump_acb(struct osiop_acb *);
179 void osiop_dump(struct osiop_softc *);
180 #else
181 #define OSIOP_TRACE(a,b,c,d)
182 #endif
183 
184 void
185 osiop_attach(struct osiop_softc *sc)
186 {
187 	struct osiop_acb *acb;
188 	bus_dma_segment_t seg;
189 	int nseg;
190 	int i, err;
191 
192 	/*
193 	 * Allocate and map DMA-safe memory for the script.
194 	 */
195 	err = bus_dmamem_alloc(sc->sc_dmat, PAGE_SIZE, PAGE_SIZE, 0,
196 	    &seg, 1, &nseg, BUS_DMA_NOWAIT);
197 	if (err) {
198 		printf(": failed to allocate script memory, err=%d\n", err);
199 		return;
200 	}
201 	err = bus_dmamem_map(sc->sc_dmat, &seg, nseg, PAGE_SIZE,
202 	    (caddr_t *)&sc->sc_script, BUS_DMA_NOWAIT | BUS_DMA_COHERENT);
203 	if (err) {
204 		printf(": failed to map script memory, err=%d\n", err);
205 		return;
206 	}
207 	err = bus_dmamap_create(sc->sc_dmat, PAGE_SIZE, 1, PAGE_SIZE, 0,
208 	    BUS_DMA_NOWAIT, &sc->sc_scrdma);
209 	if (err) {
210 		printf(": failed to create script map, err=%d\n", err);
211 		return;
212 	}
213 	err = bus_dmamap_load(sc->sc_dmat, sc->sc_scrdma,
214 	    sc->sc_script, PAGE_SIZE, NULL, BUS_DMA_NOWAIT);
215 	if (err) {
216 		printf(": failed to load script map, err=%d\n", err);
217 		return;
218 	}
219 
220 	/*
221 	 * Copy and sync script
222 	 */
223 	memcpy(sc->sc_script, osiop_script, sizeof(osiop_script));
224 	bus_dmamap_sync(sc->sc_dmat, sc->sc_scrdma, 0, sizeof(osiop_script),
225 	    BUS_DMASYNC_PREWRITE);
226 
227 	/*
228 	 * Allocate and map DMA-safe memory for the script data structure.
229 	 */
230 	err = bus_dmamem_alloc(sc->sc_dmat,
231 	    sizeof(struct osiop_ds) * OSIOP_NACB, PAGE_SIZE, 0,
232 	    &seg, 1, &nseg, BUS_DMA_NOWAIT);
233 	if (err) {
234 		printf(": failed to allocate ds memory, err=%d\n", err);
235 		return;
236 	}
237 	err = bus_dmamem_map(sc->sc_dmat, &seg, nseg,
238 	    sizeof(struct osiop_ds) * OSIOP_NACB, (caddr_t *)&sc->sc_ds,
239 	    BUS_DMA_NOWAIT | BUS_DMA_COHERENT);
240 	if (err) {
241 		printf(": failed to map ds memory, err=%d\n", err);
242 		return;
243 	}
244 	err = bus_dmamap_create(sc->sc_dmat,
245 	    sizeof(struct osiop_ds) * OSIOP_NACB, 1,
246 	    sizeof(struct osiop_ds) * OSIOP_NACB, 0,
247 	    BUS_DMA_NOWAIT, &sc->sc_dsdma);
248 	if (err) {
249 		printf(": failed to create ds map, err=%d\n", err);
250 		return;
251 	}
252 	err = bus_dmamap_load(sc->sc_dmat, sc->sc_dsdma, sc->sc_ds,
253 	    sizeof(struct osiop_ds) * OSIOP_NACB, NULL, BUS_DMA_NOWAIT);
254 	if (err) {
255 		printf(": failed to load ds map, err=%d\n", err);
256 		return;
257 	}
258 
259 	acb = malloc(sizeof(struct osiop_acb) * OSIOP_NACB,
260 	    M_DEVBUF, M_NOWAIT|M_ZERO);
261 	if (acb == NULL) {
262 		printf(": can't allocate memory for acb\n");
263 		return;
264 	}
265 	sc->sc_acb = acb;
266 	sc->sc_cfflags = sc->sc_dev.dv_cfdata->cf_flags;
267 	sc->sc_nexus = NULL;
268 	sc->sc_active = 0;
269 	memset(sc->sc_tinfo, 0, sizeof(sc->sc_tinfo));
270 
271 	/* Initialize command block queue */
272 	TAILQ_INIT(&sc->ready_list);
273 	TAILQ_INIT(&sc->nexus_list);
274 	TAILQ_INIT(&sc->free_list);
275 
276 	/* Initialize each command block */
277 	for (i = 0; i < OSIOP_NACB; i++) {
278 		bus_addr_t dsa;
279 
280 		/* XXX How much size is required for each command block? */
281 		err = bus_dmamap_create(sc->sc_dmat, PAGE_SIZE, 1, PAGE_SIZE,
282 		    0, BUS_DMA_NOWAIT, &acb->cmddma);
283 		if (err) {
284 			printf(": failed to create cmddma map, err=%d\n", err);
285 			return;
286 		}
287 		err = bus_dmamap_create(sc->sc_dmat, OSIOP_MAX_XFER, OSIOP_NSG,
288 		    OSIOP_MAX_XFER, 0, BUS_DMA_NOWAIT, &acb->datadma);
289 		if (err) {
290 			printf(": failed to create datadma map, err=%d\n",
291 			    err);
292 			return;
293 		}
294 
295 		acb->sc = sc;
296 		acb->ds = &sc->sc_ds[i];
297 		acb->dsoffset = sizeof(struct osiop_ds) * i;
298 
299 		dsa = sc->sc_dsdma->dm_segs[0].ds_addr + acb->dsoffset;
300 		acb->ds->id.addr = dsa + OSIOP_DSIDOFF;
301 		acb->ds->status.count = 1;
302 		acb->ds->status.addr = dsa + OSIOP_DSSTATOFF;
303 		acb->ds->msg.count = 1;
304 		acb->ds->msg.addr = dsa + OSIOP_DSMSGOFF;
305 		acb->ds->msgin.count = 1;
306 		acb->ds->msgin.addr = dsa + OSIOP_DSMSGINOFF;
307 		acb->ds->extmsg.count = 1;
308 		acb->ds->extmsg.addr = dsa + OSIOP_DSEXTMSGOFF;
309 		acb->ds->synmsg.count = 3;
310 		acb->ds->synmsg.addr = dsa + OSIOP_DSSYNMSGOFF;
311 		TAILQ_INSERT_TAIL(&sc->free_list, acb, chain);
312 
313 		acb++;
314 	}
315 
316 	printf(": NCR53C710 rev %d, %dMHz, SCSI ID %d\n",
317 	    osiop_read_1(sc, OSIOP_CTEST8) >> 4, sc->sc_clock_freq, sc->sc_id);
318 
319 	/*
320 	 * Initialize all
321 	 */
322 	osiop_init(sc);
323 
324 	/*
325 	 * Fill in the adapter.
326 	 */
327 	sc->sc_adapter.adapt_dev = &sc->sc_dev;
328 	sc->sc_adapter.adapt_nchannels = 1;
329 	sc->sc_adapter.adapt_openings = OSIOP_NACB;
330 	sc->sc_adapter.adapt_max_periph = 1;
331 	sc->sc_adapter.adapt_ioctl = NULL;
332 	sc->sc_adapter.adapt_minphys = osiop_minphys;
333 	sc->sc_adapter.adapt_request = osiop_scsipi_request;
334 
335 	/*
336 	 * Fill in the channel.
337 	 */
338 	sc->sc_channel.chan_adapter = &sc->sc_adapter;
339 	sc->sc_channel.chan_bustype = &scsi_bustype;
340 	sc->sc_channel.chan_channel = 0;
341 	sc->sc_channel.chan_ntargets = OSIOP_NTGT;
342 	sc->sc_channel.chan_nluns = 8;
343 	sc->sc_channel.chan_id = sc->sc_id;
344 
345 	/*
346 	 * Now try to attach all the sub devices.
347 	 */
348 	config_found(&sc->sc_dev, &sc->sc_channel, scsiprint);
349 }
350 
351 /*
352  * default minphys routine for osiop based controllers
353  */
354 void
355 osiop_minphys(struct buf *bp)
356 {
357 
358 	if (bp->b_bcount > OSIOP_MAX_XFER)
359 		bp->b_bcount = OSIOP_MAX_XFER;
360 	minphys(bp);
361 }
362 
363 /*
364  * used by specific osiop controller
365  *
366  */
367 void
368 osiop_scsipi_request(struct scsipi_channel *chan, scsipi_adapter_req_t req,
369     void *arg)
370 {
371 	struct scsipi_xfer *xs;
372 	struct scsipi_periph *periph;
373 	struct osiop_acb *acb;
374 	struct osiop_softc *sc;
375 	int err, flags, s;
376 
377 	sc = (struct osiop_softc *)chan->chan_adapter->adapt_dev;
378 
379 	switch (req) {
380 	case ADAPTER_REQ_RUN_XFER:
381 		xs = arg;
382 		periph = xs->xs_periph;
383 		flags = xs->xs_control;
384 
385 		/* XXXX ?? */
386 		if (flags & XS_CTL_DATA_UIO)
387 			panic("osiop: scsi data uio requested");
388 
389 		/* XXXX ?? */
390 		if (sc->sc_nexus && flags & XS_CTL_POLL)
391 #if 0
392 			panic("osiop_scsicmd: busy");
393 #else
394 			printf("osiop_scsicmd: busy\n");
395 #endif
396 
397 		s = splbio();
398 		acb = TAILQ_FIRST(&sc->free_list);
399 		if (acb != NULL) {
400 			TAILQ_REMOVE(&sc->free_list, acb, chain);
401 		}
402 #ifdef DIAGNOSTIC
403 		else {
404 			scsipi_printaddr(periph);
405 			printf("unable to allocate acb\n");
406 			panic("osiop_scsipi_request");
407 		}
408 #endif
409 
410 		acb->status = ACB_S_READY;
411 		acb->xs = xs;
412 
413 		/* Setup DMA map for SCSI command buffer */
414 		err = bus_dmamap_load(sc->sc_dmat, acb->cmddma,
415 		    xs->cmd, xs->cmdlen, NULL, BUS_DMA_NOWAIT);
416 		if (err) {
417 			printf("%s: unable to load cmd DMA map: %d\n",
418 			    sc->sc_dev.dv_xname, err);
419 			xs->error = XS_DRIVER_STUFFUP;
420 			TAILQ_INSERT_TAIL(&sc->free_list, acb, chain);
421 			scsipi_done(xs);
422 			splx(s);
423 			return;
424 		}
425 
426 		/* Setup DMA map for data buffer */
427 		if (xs->xs_control & (XS_CTL_DATA_IN | XS_CTL_DATA_OUT)) {
428 			err = bus_dmamap_load(sc->sc_dmat, acb->datadma,
429 			    xs->data, xs->datalen, NULL,
430 			    BUS_DMA_NOWAIT | BUS_DMA_STREAMING |
431 			    ((xs->xs_control & XS_CTL_DATA_IN) ?
432 			     BUS_DMA_READ : BUS_DMA_WRITE));
433 			if (err) {
434 				printf("%s: unable to load data DMA map: %d\n",
435 				    sc->sc_dev.dv_xname, err);
436 				xs->error = XS_DRIVER_STUFFUP;
437 				scsipi_done(xs);
438 				bus_dmamap_unload(sc->sc_dmat, acb->cmddma);
439 				TAILQ_INSERT_TAIL(&sc->free_list, acb, chain);
440 				splx(s);
441 				return;
442 			}
443 			bus_dmamap_sync(sc->sc_dmat, acb->datadma,
444 			    0, xs->datalen, (xs->xs_control & XS_CTL_DATA_IN) ?
445 			    BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
446 		}
447 		bus_dmamap_sync(sc->sc_dmat, acb->cmddma, 0, xs->cmdlen,
448 		    BUS_DMASYNC_PREWRITE);
449 
450 		acb->cmdlen = xs->cmdlen;
451 		acb->datalen = xs->datalen;
452 #ifdef OSIOP_DEBUG
453 		acb->data = xs->data;
454 #endif
455 
456 		TAILQ_INSERT_TAIL(&sc->ready_list, acb, chain);
457 
458 		if (sc->sc_nexus == NULL)
459 			osiop_sched(sc);
460 
461 		splx(s);
462 
463 		if (flags & XS_CTL_POLL || sc->sc_flags & OSIOP_NODMA)
464 			osiop_poll(sc, acb);
465 		return;
466 
467 	case ADAPTER_REQ_GROW_RESOURCES:
468 		return;
469 
470 	case ADAPTER_REQ_SET_XFER_MODE:
471 		{
472 			struct osiop_tinfo *ti;
473 			struct scsipi_xfer_mode *xm = arg;
474 
475 			ti = &sc->sc_tinfo[xm->xm_target];
476 
477 			if ((xm->xm_mode & PERIPH_CAP_SYNC) != 0 &&
478 			    (ti->flags & TI_NOSYNC) == 0)
479 				ti->state = NEG_INIT;
480 
481 			/*
482 			 * If we're not going to negotiate, send the
483 			 * notification now, since it won't happen later.
484 			 */
485 			if (ti->state == NEG_DONE)
486 				osiop_update_xfer_mode(sc, xm->xm_target);
487 
488 			return;
489 		}
490 	}
491 }
492 
493 void
494 osiop_poll(struct osiop_softc *sc, struct osiop_acb *acb)
495 {
496 	struct scsipi_xfer *xs = acb->xs;
497 	int status, i, s, to;
498 	uint8_t istat, dstat, sstat0;
499 
500 	s = splbio();
501 	to = xs->timeout / 1000;
502 	if (!TAILQ_EMPTY(&sc->nexus_list))
503 		printf("%s: osiop_poll called with disconnected device\n",
504 		    sc->sc_dev.dv_xname);
505 	for (;;) {
506 		i = 1000;
507 		while (((istat = osiop_read_1(sc, OSIOP_ISTAT)) &
508 		    (OSIOP_ISTAT_SIP | OSIOP_ISTAT_DIP)) == 0) {
509 			if (i <= 0) {
510 #ifdef OSIOP_DEBUG
511 				printf("waiting: tgt %d cmd %02x sbcl %02x"
512 				    " dsp %x (+%lx) dcmd %x"
513 				    " ds %p timeout %d\n",
514 				    xs->xs_periph->periph_target,
515 				    xs->cmd->opcode,
516 				    osiop_read_1(sc, OSIOP_SBCL),
517 				    osiop_read_4(sc, OSIOP_DSP),
518 				    osiop_read_4(sc, OSIOP_DSP) -
519 				        sc->sc_scrdma->dm_segs[0].ds_addr,
520 				    osiop_read_1(sc, OSIOP_DCMD),
521 				    acb->ds, acb->xs->timeout);
522 #endif
523 				i = 1000;
524 				to--;
525 				if (to <= 0) {
526 					osiop_reset(sc);
527 					splx(s);
528 					return;
529 				}
530 			}
531 			delay(1000);
532 			i--;
533 		}
534 		sstat0 = osiop_read_1(sc, OSIOP_SSTAT0);
535 		delay(25);
536 		dstat = osiop_read_1(sc, OSIOP_DSTAT);
537 		if (osiop_checkintr(sc, istat, dstat, sstat0, &status)) {
538 			if (acb != sc->sc_nexus)
539 				printf("%s: osiop_poll disconnected device"
540 				    " completed\n", sc->sc_dev.dv_xname);
541 			else if ((sc->sc_flags & OSIOP_INTDEFER) == 0) {
542 				sc->sc_flags &= ~OSIOP_INTSOFF;
543 				osiop_write_1(sc, OSIOP_SIEN, sc->sc_sien);
544 				osiop_write_1(sc, OSIOP_DIEN, sc->sc_dien);
545 			}
546 			osiop_scsidone(sc->sc_nexus, status);
547 		}
548 
549 		if (xs->xs_status & XS_STS_DONE)
550 			break;
551 	}
552 
553 	splx(s);
554 	return;
555 }
556 
557 /*
558  * start next command that's ready
559  */
560 void
561 osiop_sched(struct osiop_softc *sc)
562 {
563 	struct scsipi_periph *periph;
564 	struct osiop_acb *acb;
565 	int i;
566 
567 #ifdef OSIOP_DEBUG
568 	if (sc->sc_nexus != NULL) {
569 		printf("%s: osiop_sched- nexus %p/%d ready %p/%d\n",
570 		    sc->sc_dev.dv_xname, sc->sc_nexus,
571 		    sc->sc_nexus->xs->xs_periph->periph_target,
572 		    sc->ready_list.tqh_first,
573 		    sc->ready_list.tqh_first->xs->xs_periph->periph_target);
574 		return;
575 	}
576 #endif
577 	TAILQ_FOREACH(acb, &sc->ready_list, chain) {
578 		periph = acb->xs->xs_periph;
579 		i = periph->periph_target;
580 		if ((sc->sc_tinfo[i].lubusy & (1 << periph->periph_lun)) == 0) {
581 			struct osiop_tinfo *ti;
582 
583 			TAILQ_REMOVE(&sc->ready_list, acb, chain);
584 			sc->sc_nexus = acb;
585 			ti = &sc->sc_tinfo[i];
586 			ti->lubusy |= (1 << periph->periph_lun);
587 			break;
588 		}
589 	}
590 
591 	if (acb == NULL) {
592 #ifdef OSIOP_DEBUG
593 		printf("%s: osiop_sched didn't find ready command\n",
594 		    sc->sc_dev.dv_xname);
595 #endif
596 		return;
597 	}
598 
599 	if (acb->xs->xs_control & XS_CTL_RESET)
600 		osiop_reset(sc);
601 
602 	sc->sc_active++;
603 	osiop_select(sc);
604 }
605 
606 void
607 osiop_scsidone(struct osiop_acb *acb, int status)
608 {
609 	struct scsipi_xfer *xs;
610 	struct scsipi_periph *periph;
611 	struct osiop_softc *sc;
612 	int dosched = 0;
613 
614 #ifdef DIAGNOSTIC
615 	if (acb == NULL || acb->xs == NULL) {
616 		printf("osiop_scsidone: NULL acb or scsipi_xfer\n");
617 #if defined(OSIOP_DEBUG) && defined(DDB)
618 		Debugger();
619 #endif
620 		return;
621 	}
622 #endif
623 	xs = acb->xs;
624 	sc = acb->sc;
625 	periph = xs->xs_periph;
626 
627 #ifdef OSIOP_DEBUG
628 	if (acb->status != ACB_S_DONE)
629 		printf("%s: acb not done (status %d)\n",
630 		    sc->sc_dev.dv_xname, acb->status);
631 #endif
632 
633 	xs->status = status;
634 
635 	switch (status) {
636 	case SCSI_OK:
637 		xs->error = XS_NOERROR;
638 		break;
639 	case SCSI_BUSY:
640 		xs->error = XS_BUSY;
641 		break;
642 	case SCSI_CHECK:
643 		xs->error = XS_BUSY;
644 		break;
645 	case SCSI_OSIOP_NOCHECK:
646 		/*
647 		 * don't check status, xs->error is already valid
648 		 */
649 		break;
650 	case SCSI_OSIOP_NOSTATUS:
651 		/*
652 		 * the status byte was not updated, cmd was
653 		 * aborted
654 		 */
655 		xs->error = XS_SELTIMEOUT;
656 		break;
657 	default:
658 #ifdef OSIOP_DEBUG
659 		printf("%s: osiop_scsidone: unknown status code (0x%02x)\n",
660 		    sc->sc_dev.dv_xname, status);
661 #endif
662 		xs->error = XS_DRIVER_STUFFUP;
663 		break;
664 	}
665 
666 	if (xs->xs_control & (XS_CTL_DATA_IN | XS_CTL_DATA_OUT)) {
667 		bus_dmamap_sync(sc->sc_dmat, acb->datadma, 0, acb->datalen,
668 		    (xs->xs_control & XS_CTL_DATA_IN) ?
669 		    BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
670 		bus_dmamap_unload(sc->sc_dmat, acb->datadma);
671 	}
672 
673 	bus_dmamap_sync(sc->sc_dmat, acb->cmddma, 0, acb->cmdlen,
674 	    BUS_DMASYNC_POSTWRITE);
675 	bus_dmamap_unload(sc->sc_dmat, acb->cmddma);
676 
677 	/*
678 	 * Remove the ACB from whatever queue it's on.  We have to do a bit of
679 	 * a hack to figure out which queue it's on.  Note that it is *not*
680 	 * necessary to cdr down the ready queue, but we must cdr down the
681 	 * nexus queue and see if it's there, so we can mark the unit as no
682 	 * longer busy.  This code is sickening, but it works.
683 	 */
684 	if (acb == sc->sc_nexus) {
685 		sc->sc_nexus = NULL;
686 		sc->sc_tinfo[periph->periph_target].lubusy &=
687 		    ~(1 << periph->periph_lun);
688 		if (!TAILQ_EMPTY(&sc->ready_list))
689 			dosched = 1;	/* start next command */
690 		sc->sc_active--;
691 		OSIOP_TRACE('d', 'a', status, 0);
692 	} else if (sc->ready_list.tqh_last == &acb->chain.tqe_next) {
693 		TAILQ_REMOVE(&sc->ready_list, acb, chain);
694 		OSIOP_TRACE('d', 'r', status, 0);
695 	} else {
696 		struct osiop_acb *acb2;
697 		TAILQ_FOREACH(acb2, &sc->nexus_list, chain) {
698 			if (acb2 == acb) {
699 				TAILQ_REMOVE(&sc->nexus_list, acb, chain);
700 				sc->sc_tinfo[periph->periph_target].lubusy &=
701 				    ~(1 << periph->periph_lun);
702 				sc->sc_active--;
703 				break;
704 			}
705 		}
706 		if (acb2 == NULL) {
707 			if (acb->chain.tqe_next != NULL) {
708 				TAILQ_REMOVE(&sc->ready_list, acb, chain);
709 				sc->sc_active--;
710 			} else {
711 				printf("%s: can't find matching acb\n",
712 				    sc->sc_dev.dv_xname);
713 #ifdef DDB
714 #if 0
715 				Debugger();
716 #endif
717 #endif
718 			}
719 		}
720 		OSIOP_TRACE('d', 'n', status, 0);
721 	}
722 	/* Put it on the free list. */
723 	acb->status = ACB_S_FREE;
724 	TAILQ_INSERT_TAIL(&sc->free_list, acb, chain);
725 	sc->sc_tinfo[periph->periph_target].cmds++;
726 
727 	callout_stop(&xs->xs_callout);
728 	xs->resid = 0;
729 	scsipi_done(xs);
730 
731 	if (dosched && sc->sc_nexus == NULL)
732 		osiop_sched(sc);
733 }
734 
735 void
736 osiop_abort(struct osiop_softc *sc, const char *where)
737 {
738 
739 	printf("%s: abort %s: dstat %02x, sstat0 %02x sbcl %02x\n",
740 	    sc->sc_dev.dv_xname, where,
741 	    osiop_read_1(sc, OSIOP_DSTAT),
742 	    osiop_read_1(sc, OSIOP_SSTAT0),
743 	    osiop_read_1(sc, OSIOP_SBCL));
744 
745 	/* XXX XXX XXX */
746 	if (sc->sc_active > 0) {
747 		sc->sc_active = 0;
748 	}
749 }
750 
751 void
752 osiop_init(struct osiop_softc *sc)
753 {
754 	int i, inhibit_sync, inhibit_disc;
755 
756 	sc->sc_tcp[1] = 1000 / sc->sc_clock_freq;
757 	sc->sc_tcp[2] = 1500 / sc->sc_clock_freq;
758 	sc->sc_tcp[3] = 2000 / sc->sc_clock_freq;
759 	sc->sc_minsync = sc->sc_tcp[1];		/* in 4ns units */
760 
761 	if (sc->sc_minsync < 25)
762 		sc->sc_minsync = 25;
763 
764 	if (sc->sc_clock_freq <= 25) {
765 		sc->sc_dcntl |= OSIOP_DCNTL_CF_1;	/* SCLK/1 */
766 		sc->sc_tcp[0] = sc->sc_tcp[1];
767 	} else if (sc->sc_clock_freq <= 37) {
768 		sc->sc_dcntl |= OSIOP_DCNTL_CF_1_5;	/* SCLK/1.5 */
769 		sc->sc_tcp[0] = sc->sc_tcp[2];
770 	} else if (sc->sc_clock_freq <= 50) {
771 		sc->sc_dcntl |= OSIOP_DCNTL_CF_2;	/* SCLK/2 */
772 		sc->sc_tcp[0] = sc->sc_tcp[3];
773 	} else {
774 		sc->sc_dcntl |= OSIOP_DCNTL_CF_3;	/* SCLK/3 */
775 		sc->sc_tcp[0] = 3000 / sc->sc_clock_freq;
776 	}
777 
778 	if ((sc->sc_cfflags & 0x10000) != 0) {
779 		sc->sc_flags |= OSIOP_NODMA;
780 #ifdef OSIOP_DEBUG
781 		printf("%s: DMA disabled; use polling\n",
782 		    sc->sc_dev.dv_xname);
783 #endif
784 	}
785 
786 	inhibit_sync = (sc->sc_cfflags & 0xff00) >> 8;	/* XXX */
787 	inhibit_disc =  sc->sc_cfflags & 0x00ff;	/* XXX */
788 #ifdef OSIOP_DEBUG
789 	if (inhibit_sync != 0)
790 		printf("%s: Inhibiting synchronous transfer: 0x%02x\n",
791 		    sc->sc_dev.dv_xname, inhibit_sync);
792 	if (inhibit_disc != 0)
793 		printf("%s: Inhibiting disconnect: 0x%02x\n",
794 		    sc->sc_dev.dv_xname, inhibit_disc);
795 #endif
796 	for (i = 0; i < OSIOP_NTGT; i++) {
797 		if (inhibit_sync & (1 << i))
798 			sc->sc_tinfo[i].flags |= TI_NOSYNC;
799 		if (inhibit_disc & (1 << i))
800 			sc->sc_tinfo[i].flags |= TI_NODISC;
801 	}
802 
803 	osiop_resetbus(sc);
804 	osiop_reset(sc);
805 }
806 
807 void
808 osiop_reset(struct osiop_softc *sc)
809 {
810 	struct osiop_acb *acb;
811 	int i, s;
812 	uint8_t stat;
813 
814 #ifdef OSIOP_DEBUG
815 	printf("%s: resetting chip\n", sc->sc_dev.dv_xname);
816 #endif
817 	if (sc->sc_flags & OSIOP_ALIVE)
818 		osiop_abort(sc, "reset");
819 
820 	s = splbio();
821 
822 	/*
823 	 * Reset the chip
824 	 * XXX - is this really needed?
825 	 */
826 
827 	/* abort current script */
828 	osiop_write_1(sc, OSIOP_ISTAT,
829 	    osiop_read_1(sc, OSIOP_ISTAT) | OSIOP_ISTAT_ABRT);
830 	/* reset chip */
831 	osiop_write_1(sc, OSIOP_ISTAT,
832 	    osiop_read_1(sc, OSIOP_ISTAT) | OSIOP_ISTAT_RST);
833 	delay(100);
834 	osiop_write_1(sc, OSIOP_ISTAT,
835 	    osiop_read_1(sc, OSIOP_ISTAT) & ~OSIOP_ISTAT_RST);
836 	delay(100);
837 
838 	/*
839 	 * Set up various chip parameters
840 	 */
841 	osiop_write_1(sc, OSIOP_SCNTL0,
842 	    OSIOP_ARB_FULL | OSIOP_SCNTL0_EPC | OSIOP_SCNTL0_EPG);
843 	osiop_write_1(sc, OSIOP_SCNTL1, OSIOP_SCNTL1_ESR);
844 	osiop_write_1(sc, OSIOP_DCNTL, sc->sc_dcntl);
845 	osiop_write_1(sc, OSIOP_DMODE, OSIOP_DMODE_BL4);
846 	/* don't enable interrupts yet */
847 	osiop_write_1(sc, OSIOP_SIEN, 0x00);
848 	osiop_write_1(sc, OSIOP_DIEN, 0x00);
849 	osiop_write_1(sc, OSIOP_SCID, OSIOP_SCID_VALUE(sc->sc_id));
850 	osiop_write_1(sc, OSIOP_DWT, 0x00);
851 	osiop_write_1(sc, OSIOP_CTEST0, osiop_read_1(sc, OSIOP_CTEST0)
852 	    | OSIOP_CTEST0_BTD | OSIOP_CTEST0_EAN);
853 	osiop_write_1(sc, OSIOP_CTEST7,
854 	    osiop_read_1(sc, OSIOP_CTEST7) | sc->sc_ctest7);
855 	osiop_write_1(sc, OSIOP_CTEST4,
856 	    osiop_read_1(sc, OSIOP_CTEST4) | sc->sc_ctest4);
857 
858 	/* will need to re-negotiate sync xfers */
859 	for (i = 0; i < OSIOP_NTGT; i++) {
860 		sc->sc_tinfo[i].state = NEG_INIT;
861 		sc->sc_tinfo[i].period = 0;
862 		sc->sc_tinfo[i].offset = 0;
863 	}
864 
865 	stat = osiop_read_1(sc, OSIOP_ISTAT);
866 	if (stat & OSIOP_ISTAT_SIP)
867 		osiop_read_1(sc, OSIOP_SSTAT0);
868 	delay(25);
869 	if (stat & OSIOP_ISTAT_DIP)
870 		osiop_read_1(sc, OSIOP_DSTAT);
871 
872 	splx(s);
873 
874 	delay(osiop_reset_delay * 1000);
875 
876 	if (sc->sc_nexus != NULL) {
877 		sc->sc_nexus->xs->error =
878 		    (sc->sc_nexus->flags & ACB_F_TIMEOUT) ?
879 		    XS_TIMEOUT : XS_RESET;
880 		sc->sc_nexus->status = ACB_S_DONE;
881 		sc->sc_nexus->flags = 0;
882 		osiop_scsidone(sc->sc_nexus, SCSI_OSIOP_NOCHECK);
883 	}
884 	while ((acb = TAILQ_FIRST(&sc->nexus_list)) != NULL) {
885 		acb->xs->error = (acb->flags & ACB_F_TIMEOUT) ?
886 		    XS_TIMEOUT : XS_RESET;
887 		acb->status = ACB_S_DONE;
888 		acb->flags = 0;
889 		osiop_scsidone(acb, SCSI_OSIOP_NOCHECK);
890 	}
891 
892 	sc->sc_flags &= ~(OSIOP_INTDEFER | OSIOP_INTSOFF);
893 	/* enable SCSI and DMA interrupts */
894 	sc->sc_sien = OSIOP_SIEN_M_A | OSIOP_SIEN_STO | /*OSIOP_SIEN_SEL |*/
895 	    OSIOP_SIEN_SGE | OSIOP_SIEN_UDC | OSIOP_SIEN_RST | OSIOP_SIEN_PAR;
896 	sc->sc_dien = OSIOP_DIEN_BF | OSIOP_DIEN_ABRT | OSIOP_DIEN_SIR |
897 	    /*OSIOP_DIEN_WTD |*/ OSIOP_DIEN_IID;
898 	osiop_write_1(sc, OSIOP_SIEN, sc->sc_sien);
899 	osiop_write_1(sc, OSIOP_DIEN, sc->sc_dien);
900 }
901 
902 void
903 osiop_resetbus(struct osiop_softc *sc)
904 {
905 
906 	osiop_write_1(sc, OSIOP_SIEN, 0);
907 	osiop_write_1(sc, OSIOP_SCNTL1,
908 	    osiop_read_1(sc, OSIOP_SCNTL1) | OSIOP_SCNTL1_RST);
909 	delay(25);
910 	osiop_write_1(sc, OSIOP_SCNTL1,
911 	    osiop_read_1(sc, OSIOP_SCNTL1) & ~OSIOP_SCNTL1_RST);
912 }
913 
914 /*
915  * Setup Data Storage for 53C710 and start SCRIPTS processing
916  */
917 
918 void
919 osiop_start(struct osiop_softc *sc)
920 {
921 	struct osiop_acb *acb = sc->sc_nexus;
922 	struct osiop_ds *ds = acb->ds;
923 	struct scsipi_xfer *xs = acb->xs;
924 	bus_dmamap_t dsdma = sc->sc_dsdma, datadma = acb->datadma;
925 	struct osiop_tinfo *ti;
926 	int target = xs->xs_periph->periph_target;
927 	int lun = xs->xs_periph->periph_lun;
928 	int disconnect, i;
929 
930 #ifdef OSIOP_DEBUG
931 	if (osiop_debug & DEBUG_DISC &&
932 	    osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) {
933 		printf("ACK! osiop was busy: script %p dsa %p active %d\n",
934 		    sc->sc_script, acb->ds, sc->sc_active);
935 		printf("istat %02x sfbr %02x lcrc %02x sien %02x dien %02x\n",
936 		    osiop_read_1(sc, OSIOP_ISTAT),
937 		    osiop_read_1(sc, OSIOP_SFBR),
938 		    osiop_read_1(sc, OSIOP_LCRC),
939 		    osiop_read_1(sc, OSIOP_SIEN),
940 		    osiop_read_1(sc, OSIOP_DIEN));
941 #ifdef DDB
942 #if 0
943 		Debugger();
944 #endif
945 #endif
946 	}
947 #endif
948 
949 #ifdef OSIOP_DEBUG
950 	if (acb->status != ACB_S_READY)
951 		panic("osiop_start: non-ready cmd in acb");
952 #endif
953 
954 	acb->intstat = 0;
955 
956 	ds->cmd.count = acb->cmdlen;
957 	ds->cmd.addr = acb->cmddma->dm_segs[0].ds_addr;
958 
959 	ti = &sc->sc_tinfo[target];
960 	ds->scsi_addr = ((1 << 16) << target) | (ti->sxfer << 8);
961 
962 	disconnect = (xs->xs_control & XS_CTL_REQSENSE) == 0 &&
963 	    (ti->flags & TI_NODISC) == 0;
964 
965 	ds->msgout[0] = MSG_IDENTIFY(lun, disconnect);
966 	ds->id.count = 1;
967 	ds->stat[0] = SCSI_OSIOP_NOSTATUS;	/* set invalid status */
968 	ds->msgbuf[0] = ds->msgbuf[1] = MSG_INVALID;
969 	memset(&ds->data, 0, sizeof(ds->data));
970 
971 	/*
972 	 * Negotiate wide is the initial negotiation state;  since the 53c710
973 	 * doesn't do wide transfers, just begin the synchronous transfer
974 	 * negotiation here.
975 	 */
976 	if (ti->state == NEG_INIT) {
977 		if ((ti->flags & TI_NOSYNC) != 0) {
978 			ti->state = NEG_DONE;
979 			ti->sbcl = 0;
980 			ti->sxfer = 0;
981 			ti->period = 0;
982 			ti->offset = 0;
983 			osiop_update_xfer_mode(sc, target);
984 #ifdef OSIOP_DEBUG
985 			if (osiopsync_debug)
986 				printf("Forcing target %d asynchronous\n",
987 				    target);
988 #endif
989 		} else {
990 			ds->msgbuf[2] = MSG_INVALID;
991 			ds->msgout[1] = MSG_EXTENDED;
992 			ds->msgout[2] = MSG_EXT_SDTR_LEN;
993 			ds->msgout[3] = MSG_EXT_SDTR;
994 			ds->msgout[4] = sc->sc_minsync;
995 			ds->msgout[5] = OSIOP_MAX_OFFSET;
996 			ds->id.count = MSG_EXT_SDTR_LEN + 3;
997 			ti->state = NEG_WAITS;
998 #ifdef OSIOP_DEBUG
999 			if (osiopsync_debug)
1000 				printf("Sending sync request to target %d\n",
1001 				    target);
1002 #endif
1003 		}
1004 	}
1005 
1006 	acb->curaddr = 0;
1007 	acb->curlen = 0;
1008 
1009 	/*
1010 	 * Build physical DMA addresses for scatter/gather I/O
1011 	 */
1012 	if (xs->xs_control & (XS_CTL_DATA_IN | XS_CTL_DATA_OUT)) {
1013 		for (i = 0; i < datadma->dm_nsegs; i++) {
1014 			ds->data[i].count = datadma->dm_segs[i].ds_len;
1015 			ds->data[i].addr  = datadma->dm_segs[i].ds_addr;
1016 		}
1017 	}
1018 
1019 	/* sync script data structure */
1020 	bus_dmamap_sync(sc->sc_dmat, dsdma,
1021 	    acb->dsoffset, sizeof(struct osiop_ds),
1022 	    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
1023 
1024 	acb->status = ACB_S_ACTIVE;
1025 
1026 	/* handle timeout */
1027 	if ((xs->xs_control & XS_CTL_POLL) == 0) {
1028 		int timeout = mstohz(acb->xs->timeout);
1029 		/* start expire timer */
1030 		if (timeout == 0)
1031 			timeout = 1;
1032 		callout_reset(&xs->xs_callout, timeout,
1033 		    osiop_timeout, acb);
1034 	}
1035 #ifdef OSIOP_DEBUG
1036 	if (osiop_debug & DEBUG_DISC &&
1037 	    osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) {
1038 		printf("ACK! osiop was busy at start: "
1039 		    "script %p dsa %p active %d\n",
1040 		    sc->sc_script, acb->ds, sc->sc_active);
1041 #ifdef DDB
1042 #if 0
1043 		Debugger();
1044 #endif
1045 #endif
1046 	}
1047 #endif
1048 	if (TAILQ_EMPTY(&sc->nexus_list)) {
1049 		if (osiop_read_1(sc, OSIOP_ISTAT) & OSIOP_ISTAT_CON)
1050 			printf("%s: osiop_select while connected?\n",
1051 			    sc->sc_dev.dv_xname);
1052 		osiop_write_4(sc, OSIOP_TEMP, 0);
1053 		osiop_write_1(sc, OSIOP_SBCL, ti->sbcl);
1054 		osiop_write_4(sc, OSIOP_DSA,
1055 		    dsdma->dm_segs[0].ds_addr + acb->dsoffset);
1056 		osiop_write_4(sc, OSIOP_DSP,
1057 		    sc->sc_scrdma->dm_segs[0].ds_addr + Ent_scripts);
1058 		OSIOP_TRACE('s', 1, 0, 0);
1059 	} else {
1060 		if ((osiop_read_1(sc, OSIOP_ISTAT) & OSIOP_ISTAT_CON) == 0) {
1061 			osiop_write_1(sc, OSIOP_ISTAT, OSIOP_ISTAT_SIGP);
1062 			OSIOP_TRACE('s', 2, 0, 0);
1063 		} else {
1064 			OSIOP_TRACE('s', 3,
1065 			    osiop_read_1(sc, OSIOP_ISTAT), 0);
1066 		}
1067 	}
1068 #ifdef OSIOP_DEBUG
1069 	osiopstarts++;
1070 #endif
1071 }
1072 
1073 /*
1074  * Process a DMA or SCSI interrupt from the 53C710 SIOP
1075  */
1076 
1077 int
1078 osiop_checkintr(struct osiop_softc *sc, uint8_t istat, uint8_t dstat,
1079     uint8_t sstat0, int *status)
1080 {
1081 	struct osiop_acb *acb = sc->sc_nexus;
1082 	struct osiop_ds *ds = NULL;	/* XXX */
1083 	bus_dmamap_t dsdma = sc->sc_dsdma;
1084 	bus_addr_t scraddr = sc->sc_scrdma->dm_segs[0].ds_addr;
1085 	int target = 0;
1086 	int dfifo, dbc, intcode, sstat1;
1087 
1088 	dfifo = osiop_read_1(sc, OSIOP_DFIFO);
1089 	dbc = osiop_read_4(sc, OSIOP_DBC) & 0x00ffffff;
1090 	sstat1 = osiop_read_1(sc, OSIOP_SSTAT1);
1091 	osiop_write_1(sc, OSIOP_CTEST8,
1092 	    osiop_read_1(sc, OSIOP_CTEST8) | OSIOP_CTEST8_CLF);
1093 	while ((osiop_read_1(sc, OSIOP_CTEST1) & OSIOP_CTEST1_FMT) !=
1094 	    OSIOP_CTEST1_FMT)
1095 		;
1096 	osiop_write_1(sc, OSIOP_CTEST8,
1097 	    osiop_read_1(sc, OSIOP_CTEST8) & ~OSIOP_CTEST8_CLF);
1098 	intcode = osiop_read_4(sc, OSIOP_DSPS);
1099 #ifdef OSIOP_DEBUG
1100 	osiopints++;
1101 	if (osiop_read_4(sc, OSIOP_DSP) != 0 &&
1102 	    (osiop_read_4(sc, OSIOP_DSP) < scraddr ||
1103 	    osiop_read_4(sc, OSIOP_DSP) >= scraddr + sizeof(osiop_script))) {
1104 		printf("%s: dsp not within script dsp %x scripts %lx:%lx",
1105 		    sc->sc_dev.dv_xname,
1106 		    osiop_read_4(sc, OSIOP_DSP),
1107 		    scraddr, scraddr + sizeof(osiop_script));
1108 		printf(" istat %x dstat %x sstat0 %x\n", istat, dstat, sstat0);
1109 #ifdef DDB
1110 		Debugger();
1111 #endif
1112 	}
1113 #endif
1114 	OSIOP_TRACE('i', dstat, istat, (istat & OSIOP_ISTAT_DIP) ?
1115 	    intcode & 0xff : sstat0);
1116 
1117 	if (acb != NULL) { /* XXX */
1118 		ds = acb->ds;
1119 		bus_dmamap_sync(sc->sc_dmat, dsdma,
1120 		    acb->dsoffset, sizeof(struct osiop_ds),
1121 		    BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
1122 #ifdef OSIOP_DEBUG
1123 		if (acb->status != ACB_S_ACTIVE)
1124 			printf("osiop_checkintr: acb not active (status %d)\n",
1125 			    acb->status);
1126 #endif
1127 	}
1128 
1129 
1130 	if (dstat & OSIOP_DSTAT_SIR && intcode == A_ok) {
1131 		/* Normal completion status, or check condition */
1132 		struct osiop_tinfo *ti;
1133 
1134 		if (acb == NULL) {
1135 			printf("%s: COMPLETE with no active command?\n",
1136 			    sc->sc_dev.dv_xname);
1137 			goto bad_phase;
1138 		}
1139 #ifdef OSIOP_DEBUG
1140 		if (osiop_read_4(sc, OSIOP_DSA) !=
1141 		    dsdma->dm_segs[0].ds_addr + acb->dsoffset) {
1142 			printf("osiop: invalid dsa: %x %lx\n",
1143 			    osiop_read_4(sc, OSIOP_DSA),
1144 			    dsdma->dm_segs[0].ds_addr + acb->dsoffset);
1145 			panic("*** osiop DSA invalid ***");
1146 		}
1147 #endif
1148 		target = acb->xs->xs_periph->periph_target;
1149 		ti = &sc->sc_tinfo[target];
1150 		if (ti->state == NEG_WAITS) {
1151 			if (ds->msgbuf[1] == MSG_INVALID)
1152 				printf("%s: target %d ignored sync request\n",
1153 				    sc->sc_dev.dv_xname, target);
1154 			else if (ds->msgbuf[1] == MSG_MESSAGE_REJECT)
1155 				printf("%s: target %d rejected sync request\n",
1156 				    sc->sc_dev.dv_xname, target);
1157 			ti->period = 0;
1158 			ti->offset = 0;
1159 			osiop_update_xfer_mode(sc, target);
1160 			ti->state = NEG_DONE;
1161 		}
1162 #ifdef OSIOP_DEBUG
1163 		if (osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) {
1164 #if 0
1165 			printf("ACK! osiop was busy at end: "
1166 			    "script %p dsa %p\n", &osiop_script, ds);
1167 #ifdef DDB
1168 			Debugger();
1169 #endif
1170 #endif
1171 		}
1172 		if (ds->msgbuf[0] != MSG_CMDCOMPLETE)
1173 			printf("%s: message was not COMMAND COMPLETE: %02x\n",
1174 			    sc->sc_dev.dv_xname, ds->msgbuf[0]);
1175 #endif
1176 		if (!TAILQ_EMPTY(&sc->nexus_list))
1177 			osiop_write_1(sc, OSIOP_DCNTL,
1178 			    osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
1179 		*status = ds->stat[0];
1180 		acb->status = ACB_S_DONE;
1181 		return (1);
1182 	}
1183 	if (dstat & OSIOP_DSTAT_SIR && intcode == A_int_syncmsg) {
1184 		if (acb == NULL) {
1185 			printf("%s: sync message with no active command?\n",
1186 			    sc->sc_dev.dv_xname);
1187 			goto bad_phase;
1188 		}
1189 		target = acb->xs->xs_periph->periph_target;
1190 		if (ds->msgbuf[1] == MSG_EXTENDED &&
1191 		    ds->msgbuf[2] == MSG_EXT_SDTR_LEN &&
1192 		    ds->msgbuf[3] == MSG_EXT_SDTR) {
1193 			struct osiop_tinfo *ti = &sc->sc_tinfo[target];
1194 #ifdef OSIOP_DEBUG
1195 			if (osiopsync_debug)
1196 				printf("sync msg in: "
1197 				    "%02x %02x %02x %02x %02x %02x\n",
1198 				    ds->msgbuf[0], ds->msgbuf[1],
1199 				    ds->msgbuf[2], ds->msgbuf[3],
1200 				    ds->msgbuf[4], ds->msgbuf[5]);
1201 #endif
1202 			ti->period = ds->msgbuf[4];
1203 			ti->offset = ds->msgbuf[5];
1204 			ti->sxfer = 0;
1205 			ti->sbcl = 0;
1206 			if (ds->msgbuf[5] != 0)
1207 				scsi_period_to_osiop(sc, target);
1208 			osiop_update_xfer_mode(sc, target);
1209 
1210 			bus_dmamap_sync(sc->sc_dmat, dsdma,
1211 			    acb->dsoffset, sizeof(struct osiop_ds),
1212 			    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
1213 			osiop_write_1(sc, OSIOP_SXFER, ti->sxfer);
1214 			osiop_write_1(sc, OSIOP_SBCL, ti->sbcl);
1215 			if (ti->state == NEG_WAITS) {
1216 				ti->state = NEG_DONE;
1217 				osiop_write_4(sc, OSIOP_DSP,
1218 				    scraddr + Ent_clear_ack);
1219 				return (0);
1220 			}
1221 			osiop_write_1(sc, OSIOP_DCNTL,
1222 			    osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
1223 			ti->state = NEG_DONE;
1224 			return (0);
1225 		}
1226 		/* XXX - not SDTR message */
1227 	}
1228 	if (sstat0 & OSIOP_SSTAT0_M_A) {
1229 		/* Phase mismatch */
1230 #ifdef OSIOP_DEBUG
1231 		osiopphmm++;
1232 #endif
1233 		if (acb == NULL) {
1234 			printf("%s: Phase mismatch with no active command?\n",
1235 			    sc->sc_dev.dv_xname);
1236 			goto bad_phase;
1237 		}
1238 		if (acb->datalen > 0) {
1239 			int adjust = (dfifo - (dbc & 0x7f)) & 0x7f;
1240 			if (sstat1 & OSIOP_SSTAT1_ORF)
1241 				adjust++;
1242 			if (sstat1 & OSIOP_SSTAT1_OLF)
1243 				adjust++;
1244 			acb->curaddr = osiop_read_4(sc, OSIOP_DNAD) - adjust;
1245 			acb->curlen = dbc + adjust;
1246 #ifdef OSIOP_DEBUG
1247 			if (osiop_debug & DEBUG_DISC) {
1248 				printf("Phase mismatch: curaddr %lx "
1249 				    "curlen %lx dfifo %x dbc %x sstat1 %x "
1250 				    "adjust %x sbcl %x starts %d acb %p\n",
1251 				    acb->curaddr, acb->curlen, dfifo,
1252 				    dbc, sstat1, adjust,
1253 				    osiop_read_1(sc, OSIOP_SBCL),
1254 				    osiopstarts, acb);
1255 				if (ds->data[1].count != 0) {
1256 					int i;
1257 					for (i = 0; ds->data[i].count != 0; i++)
1258 						printf("chain[%d] "
1259 						    "addr %x len %x\n", i,
1260 						    ds->data[i].addr,
1261 						    ds->data[i].count);
1262 				}
1263 				bus_dmamap_sync(sc->sc_dmat, dsdma,
1264 				    acb->dsoffset, sizeof(struct osiop_ds),
1265 				    BUS_DMASYNC_PREREAD |
1266 				    BUS_DMASYNC_PREWRITE);
1267 			}
1268 #endif
1269 		}
1270 #ifdef OSIOP_DEBUG
1271 		OSIOP_TRACE('m', osiop_read_1(sc, OSIOP_SBCL),
1272 		    osiop_read_4(sc, OSIOP_DSP) >> 8,
1273 		    osiop_read_4(sc, OSIOP_DSP));
1274 		if (osiop_debug & DEBUG_PHASE)
1275 			printf("Phase mismatch: %x dsp +%lx dcmd %x\n",
1276 			    osiop_read_1(sc, OSIOP_SBCL),
1277 			    osiop_read_4(sc, OSIOP_DSP) - scraddr,
1278 			    osiop_read_4(sc, OSIOP_DBC));
1279 #endif
1280 		if ((osiop_read_1(sc, OSIOP_SBCL) & OSIOP_REQ) == 0) {
1281 			printf("Phase mismatch: "
1282 			    "REQ not asserted! %02x dsp %x\n",
1283 			    osiop_read_1(sc, OSIOP_SBCL),
1284 			    osiop_read_4(sc, OSIOP_DSP));
1285 #if defined(OSIOP_DEBUG) && defined(DDB)
1286 			/*Debugger(); XXX is*/
1287 #endif
1288 		}
1289 		switch (OSIOP_PHASE(osiop_read_1(sc, OSIOP_SBCL))) {
1290 		case DATA_OUT_PHASE:
1291 		case DATA_IN_PHASE:
1292 		case STATUS_PHASE:
1293 		case COMMAND_PHASE:
1294 		case MSG_IN_PHASE:
1295 		case MSG_OUT_PHASE:
1296 			osiop_write_4(sc, OSIOP_DSP, scraddr + Ent_switch);
1297 			break;
1298 		default:
1299 			printf("%s: invalid phase\n", sc->sc_dev.dv_xname);
1300 			goto bad_phase;
1301 		}
1302 		return (0);
1303 	}
1304 	if (sstat0 & OSIOP_SSTAT0_STO) {
1305 		/* Select timed out */
1306 		if (acb == NULL) {
1307 			printf("%s: Select timeout with no active command?\n",
1308 			    sc->sc_dev.dv_xname);
1309 			goto bad_phase;
1310 		}
1311 #ifdef OSIOP_DEBUG
1312 		if (osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) {
1313 			printf("ACK! osiop was busy at timeout: "
1314 			    "script %p dsa %lx\n", sc->sc_script,
1315 			    dsdma->dm_segs[0].ds_addr + acb->dsoffset);
1316 			printf(" sbcl %x sdid %x "
1317 			    "istat %x dstat %x sstat0 %x\n",
1318 			    osiop_read_1(sc, OSIOP_SBCL),
1319 			    osiop_read_1(sc, OSIOP_SDID),
1320 			    istat, dstat, sstat0);
1321 			if ((osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) == 0) {
1322 				printf("Yikes, it's not busy now!\n");
1323 #if 0
1324 				*status = SCSI_OSIOP_NOSTATUS;
1325 				if (!TAILQ_EMPTY(&sc->nexus_list))
1326 					osiop_write_4(sc, OSIOP_DSP,
1327 					    scraddr + Ent_wait_reselect);
1328 				return (1);
1329 #endif
1330 			}
1331 #if 0
1332 			osiop_write_1(sc, OSIOP_DCNTL,
1333 			    osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
1334 #endif
1335 #ifdef DDB
1336 			Debugger();
1337 #endif
1338 			return (0);
1339 		}
1340 #endif
1341 		acb->status = ACB_S_DONE;
1342 		*status = SCSI_OSIOP_NOSTATUS;
1343 		acb->xs->error = XS_SELTIMEOUT;
1344 		if (!TAILQ_EMPTY(&sc->nexus_list))
1345 			osiop_write_4(sc, OSIOP_DSP,
1346 			    scraddr + Ent_wait_reselect);
1347 		return (1);
1348 	}
1349 	if (acb != NULL)
1350 		target = acb->xs->xs_periph->periph_target;
1351 	else
1352 		target = sc->sc_id;
1353 	if (sstat0 & OSIOP_SSTAT0_UDC) {
1354 		printf("%s: target %d disconnected unexpectedly",
1355 		    sc->sc_dev.dv_xname, target);
1356 		if (acb == NULL)
1357 			printf("with no active command?");
1358 		printf("\n");
1359 #if 0
1360 		osiop_abort(sc, "osiop_chkintr");
1361 #endif
1362 		*status = SCSI_CHECK;
1363 		if (!TAILQ_EMPTY(&sc->nexus_list))
1364 			osiop_write_4(sc, OSIOP_DSP,
1365 			    scraddr + Ent_wait_reselect);
1366 		return (acb != NULL);
1367 	}
1368 	if (dstat & OSIOP_DSTAT_SIR &&
1369 	    (intcode == A_int_disc || intcode == A_int_disc_wodp)) {
1370 		/* Disconnect */
1371 		if (acb == NULL) {
1372 			printf("%s: Disconnect with no active command?\n",
1373 			    sc->sc_dev.dv_xname);
1374 			return (0);
1375 		}
1376 #ifdef OSIOP_DEBUG
1377 		if (osiop_debug & DEBUG_DISC) {
1378 			printf("%s: ID %02x disconnected TEMP %x (+%lx) "
1379 			    "curaddr %lx curlen %lx buf %x len %x dfifo %x "
1380 			    "dbc %x sstat1 %x starts %d acb %p\n",
1381 			    sc->sc_dev.dv_xname, 1 << target,
1382 			    osiop_read_4(sc, OSIOP_TEMP),
1383 			    (osiop_read_4(sc, OSIOP_TEMP) != 0) ?
1384 			        osiop_read_4(sc, OSIOP_TEMP) - scraddr : 0,
1385 			    acb->curaddr, acb->curlen,
1386 			    ds->data[0].addr, ds->data[0].count,
1387 			    dfifo, dbc, sstat1, osiopstarts, acb);
1388 			bus_dmamap_sync(sc->sc_dmat, dsdma,
1389 			    acb->dsoffset, sizeof(struct osiop_ds),
1390 			    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
1391 		}
1392 #endif
1393 		/*
1394 		 * XXXX need to update curaddr/curlen to reflect
1395 		 * current data transferred.  If device disconnected in
1396 		 * the middle of a DMA block, they should already be set
1397 		 * by the phase change interrupt.  If the disconnect
1398 		 * occurs on a DMA block boundary, we have to figure out
1399 		 * which DMA block it was.
1400 		 */
1401 		if (acb->datalen > 0 &&
1402 		    osiop_read_4(sc, OSIOP_TEMP) != 0) {
1403 			long n = osiop_read_4(sc, OSIOP_TEMP) - scraddr;
1404 
1405 			if (acb->curlen != 0 &&
1406 			    acb->curlen != ds->data[0].count)
1407 				printf("%s: curaddr/curlen already set? "
1408 				    "n %lx iob %lx/%lx chain[0] %x/%x\n",
1409 				    sc->sc_dev.dv_xname, n,
1410 				    acb->curaddr, acb->curlen,
1411 				    ds->data[0].addr, ds->data[0].count);
1412 			if (n < Ent_datain)
1413 				n = (n - Ent_dataout) / 16;
1414 			else
1415 				n = (n - Ent_datain) / 16;
1416 			if (n < 0 || n >= OSIOP_NSG)
1417 				printf("TEMP invalid %ld\n", n);
1418 			else {
1419 				acb->curaddr = ds->data[n].addr;
1420 				acb->curlen = ds->data[n].count;
1421 			}
1422 #ifdef OSIOP_DEBUG
1423 			if (osiop_debug & DEBUG_DISC) {
1424 				printf("%s: TEMP offset %ld",
1425 				    sc->sc_dev.dv_xname, n);
1426 				printf(" curaddr %lx curlen %lx\n",
1427 				    acb->curaddr, acb->curlen);
1428 			}
1429 #endif
1430 		}
1431 		/*
1432 		 * If data transfer was interrupted by disconnect, curaddr
1433 		 * and curlen should reflect the point of interruption.
1434 		 * Adjust the DMA chain so that the data transfer begins
1435 		 * at the appropriate place upon reselection.
1436 		 * XXX This should only be done on save data pointer message?
1437 		 */
1438 		if (acb->curlen > 0) {
1439 			int i, j;
1440 
1441 #ifdef OSIOP_DEBUG
1442 			if (osiop_debug & DEBUG_DISC)
1443 				printf("%s: adjusting DMA chain\n",
1444 				    sc->sc_dev.dv_xname);
1445 			if (intcode == A_int_disc_wodp)
1446 				printf("%s: ID %02x disconnected "
1447 				    "without Save Data Pointers\n",
1448 				    sc->sc_dev.dv_xname, 1 << target);
1449 #endif
1450 			for (i = 0; i < OSIOP_NSG; i++) {
1451 				if (ds->data[i].count == 0)
1452 					break;
1453 				if (acb->curaddr >= ds->data[i].addr &&
1454 				    acb->curaddr <
1455 				    (ds->data[i].addr + ds->data[i].count))
1456 					break;
1457 			}
1458 			if (i >= OSIOP_NSG || ds->data[i].count == 0) {
1459 				printf("couldn't find saved data pointer: "
1460 				    "curaddr %lx curlen %lx i %d\n",
1461 				    acb->curaddr, acb->curlen, i);
1462 #ifdef DDB
1463 				Debugger();
1464 #endif
1465 			}
1466 #ifdef OSIOP_DEBUG
1467 			if (osiop_debug & DEBUG_DISC)
1468 				printf(" chain[0]: %x/%x -> %lx/%lx\n",
1469 				    ds->data[0].addr, ds->data[0].count,
1470 				    acb->curaddr, acb->curlen);
1471 #endif
1472 			ds->data[0].addr = acb->curaddr;
1473 			ds->data[0].count = acb->curlen;
1474 			for (j = 1, i = i + 1;
1475 			    i < OSIOP_NSG && ds->data[i].count > 0;
1476 			    i++, j++) {
1477 #ifdef OSIOP_DEBUG
1478 				if (osiop_debug & DEBUG_DISC)
1479 					printf("  chain[%d]: %x/%x -> %x/%x\n",
1480 					    j, ds->data[j].addr,
1481 					    ds->data[j].count,
1482 					    ds->data[i].addr,
1483 					    ds->data[i].count);
1484 #endif
1485 				ds->data[j].addr  = ds->data[i].addr;
1486 				ds->data[j].count = ds->data[i].count;
1487 			}
1488 			if (j < OSIOP_NSG) {
1489 				ds->data[j].addr  = 0;
1490 				ds->data[j].count = 0;
1491 			}
1492 			bus_dmamap_sync(sc->sc_dmat, dsdma,
1493 			    acb->dsoffset, sizeof(struct osiop_ds),
1494 			    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
1495 		}
1496 		sc->sc_tinfo[target].dconns++;
1497 		/*
1498 		 * add nexus to waiting list
1499 		 * clear nexus
1500 		 * try to start another command for another target/lun
1501 		 */
1502 		acb->intstat = sc->sc_flags & OSIOP_INTSOFF;
1503 		TAILQ_INSERT_TAIL(&sc->nexus_list, acb, chain);
1504 		sc->sc_nexus = NULL;		/* no current device */
1505 		osiop_write_4(sc, OSIOP_DSP, scraddr + Ent_wait_reselect);
1506 		/* XXXX start another command ? */
1507 		if (!TAILQ_EMPTY(&sc->ready_list))
1508 			osiop_sched(sc);
1509 		return (0);
1510 	}
1511 	if (dstat & OSIOP_DSTAT_SIR && intcode == A_int_reconnect) {
1512 		int reselid = ffs(osiop_read_4(sc, OSIOP_SCRATCH) & 0xff) - 1;
1513 		int reselun = osiop_read_1(sc, OSIOP_SFBR) & 0x07;
1514 #ifdef OSIOP_DEBUG
1515 		uint8_t resmsg;
1516 #endif
1517 
1518 		/* Reconnect */
1519 		/* XXXX save current SBCL */
1520 		sc->sc_sstat1 = osiop_read_1(sc, OSIOP_SBCL);
1521 #ifdef OSIOP_DEBUG
1522 		if (osiop_debug & DEBUG_DISC)
1523 			printf("%s: target ID %02x reselected dsps %x\n",
1524 			    sc->sc_dev.dv_xname, reselid, intcode);
1525 		resmsg = osiop_read_1(sc, OSIOP_SFBR);
1526 		if (!MSG_ISIDENTIFY(resmsg))
1527 			printf("%s: Reselect message in was not identify: "
1528 			    "%02x\n", sc->sc_dev.dv_xname, resmsg);
1529 #endif
1530 		if (sc->sc_nexus != NULL) {
1531 			struct scsipi_periph *periph =
1532 			    sc->sc_nexus->xs->xs_periph;
1533 #ifdef OSIOP_DEBUG
1534 			if (osiop_debug & DEBUG_DISC)
1535 				printf("%s: reselect ID %02x w/active\n",
1536 				    sc->sc_dev.dv_xname, reselid);
1537 #endif
1538 			TAILQ_INSERT_HEAD(&sc->ready_list,
1539 			    sc->sc_nexus, chain);
1540 			sc->sc_tinfo[periph->periph_target].lubusy
1541 			    &= ~(1 << periph->periph_lun);
1542 			sc->sc_active--;
1543 		}
1544 		/*
1545 		 * locate acb of reselecting device
1546 		 * set sc->sc_nexus to acb
1547 		 */
1548 		TAILQ_FOREACH(acb, &sc->nexus_list, chain) {
1549 			struct scsipi_periph *periph = acb->xs->xs_periph;
1550 			if (reselid != periph->periph_target ||
1551 			    reselun != periph->periph_lun) {
1552 				continue;
1553 			}
1554 			TAILQ_REMOVE(&sc->nexus_list, acb, chain);
1555 			sc->sc_nexus = acb;
1556 			sc->sc_flags |= acb->intstat;
1557 			acb->intstat = 0;
1558 			osiop_write_4(sc, OSIOP_DSA,
1559 			    dsdma->dm_segs[0].ds_addr + acb->dsoffset);
1560 			osiop_write_1(sc, OSIOP_SXFER,
1561 			    sc->sc_tinfo[reselid].sxfer);
1562 			osiop_write_1(sc, OSIOP_SBCL,
1563 			    sc->sc_tinfo[reselid].sbcl);
1564 			break;
1565 		}
1566 		if (acb == NULL) {
1567 			printf("%s: target ID %02x reselect nexus_list %p\n",
1568 			    sc->sc_dev.dv_xname, reselid,
1569 			    TAILQ_FIRST(&sc->nexus_list));
1570 			panic("unable to find reselecting device");
1571 		}
1572 
1573 		osiop_write_4(sc, OSIOP_TEMP, 0);
1574 		osiop_write_1(sc, OSIOP_DCNTL,
1575 		    osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
1576 		return (0);
1577 	}
1578 	if (dstat & OSIOP_DSTAT_SIR && intcode == A_int_connect) {
1579 #ifdef OSIOP_DEBUG
1580 		uint8_t ctest2 = osiop_read_1(sc, OSIOP_CTEST2);
1581 
1582 		/* reselect was interrupted (by Sig_P or select) */
1583 		if (osiop_debug & DEBUG_DISC ||
1584 		    (ctest2 & OSIOP_CTEST2_SIGP) == 0)
1585 			printf("%s: reselect interrupted (Sig_P?) "
1586 			    "scntl1 %x ctest2 %x sfbr %x istat %x/%x\n",
1587 			    sc->sc_dev.dv_xname,
1588 			    osiop_read_1(sc, OSIOP_SCNTL1), ctest2,
1589 			    osiop_read_1(sc, OSIOP_SFBR), istat,
1590 			    osiop_read_1(sc, OSIOP_ISTAT));
1591 #endif
1592 		/* XXX assumes it was not select */
1593 		if (sc->sc_nexus == NULL) {
1594 #ifdef OSIOP_DEBUG
1595 			printf("%s: reselect interrupted, sc_nexus == NULL\n",
1596 			    sc->sc_dev.dv_xname);
1597 #if 0
1598 			osiop_dump(sc);
1599 #ifdef DDB
1600 			Debugger();
1601 #endif
1602 #endif
1603 #endif
1604 			osiop_write_1(sc, OSIOP_DCNTL,
1605 			    osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
1606 			return (0);
1607 		}
1608 		target = sc->sc_nexus->xs->xs_periph->periph_target;
1609 		osiop_write_4(sc, OSIOP_TEMP, 0);
1610 		osiop_write_4(sc, OSIOP_DSA,
1611 		    dsdma->dm_segs[0].ds_addr + sc->sc_nexus->dsoffset);
1612 		osiop_write_1(sc, OSIOP_SXFER, sc->sc_tinfo[target].sxfer);
1613 		osiop_write_1(sc, OSIOP_SBCL, sc->sc_tinfo[target].sbcl);
1614 		osiop_write_4(sc, OSIOP_DSP, scraddr + Ent_scripts);
1615 		return (0);
1616 	}
1617 	if (dstat & OSIOP_DSTAT_SIR && intcode == A_int_msgin) {
1618 		/* Unrecognized message in byte */
1619 		if (acb == NULL) {
1620 			printf("%s: Bad message-in with no active command?\n",
1621 			    sc->sc_dev.dv_xname);
1622 			goto bad_phase;
1623 		}
1624 		printf("%s: Unrecognized message in data "
1625 		    "sfbr %x msg %x sbcl %x\n", sc->sc_dev.dv_xname,
1626 		    osiop_read_1(sc, OSIOP_SFBR), ds->msgbuf[1],
1627 		    osiop_read_1(sc, OSIOP_SBCL));
1628 		/* what should be done here? */
1629 		osiop_write_4(sc, OSIOP_DSP, scraddr + Ent_switch);
1630 		bus_dmamap_sync(sc->sc_dmat, dsdma,
1631 		    acb->dsoffset, sizeof(struct osiop_ds),
1632 		    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
1633 		return (0);
1634 	}
1635 	if (dstat & OSIOP_DSTAT_SIR && intcode == A_int_status) {
1636 		/* Status phase wasn't followed by message in phase? */
1637 		printf("%s: Status phase not followed by message in phase? "
1638 		    "sbcl %x sbdl %x\n", sc->sc_dev.dv_xname,
1639 		    osiop_read_1(sc, OSIOP_SBCL),
1640 		    osiop_read_1(sc, OSIOP_SBDL));
1641 		if (osiop_read_1(sc, OSIOP_SBCL) == 0xa7) {
1642 			/* It is now, just continue the script? */
1643 			osiop_write_1(sc, OSIOP_DCNTL,
1644 			    osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
1645 			return (0);
1646 		}
1647 	}
1648 	if (dstat & OSIOP_DSTAT_SIR && sstat0 == 0) {
1649 		printf("OSIOP interrupt: %x sts %x msg %x %x sbcl %x\n",
1650 		    intcode, ds->stat[0], ds->msgbuf[0], ds->msgbuf[1],
1651 		    osiop_read_1(sc, OSIOP_SBCL));
1652 		osiop_reset(sc);
1653 		*status = SCSI_OSIOP_NOSTATUS;
1654 		return (0);	/* osiop_reset has cleaned up */
1655 	}
1656 	if (sstat0 & OSIOP_SSTAT0_SGE)
1657 		printf("%s: SCSI Gross Error\n", sc->sc_dev.dv_xname);
1658 	if (sstat0 & OSIOP_SSTAT0_PAR)
1659 		printf("%s: Parity Error\n", sc->sc_dev.dv_xname);
1660 	if (dstat & OSIOP_DSTAT_IID)
1661 		printf("%s: Invalid instruction detected\n",
1662 		    sc->sc_dev.dv_xname);
1663  bad_phase:
1664 	/*
1665 	 * temporary panic for unhandled conditions
1666 	 * displays various things about the 53C710 status and registers
1667 	 * then panics.
1668 	 * XXXX need to clean this up to print out the info, reset, and continue
1669 	 */
1670 	printf("osiop_chkintr: target %x ds %p\n", target, ds);
1671 	printf("scripts %lx ds %lx dsp %x dcmd %x\n", scraddr,
1672 	    sc->sc_dsdma->dm_segs[0].ds_addr + acb->dsoffset,
1673 	    osiop_read_4(sc, OSIOP_DSP),
1674 	    osiop_read_4(sc, OSIOP_DBC));
1675 	printf("osiop_chkintr: istat %x dstat %x sstat0 %x "
1676 	    "dsps %x dsa %x sbcl %x sts %x msg %x %x sfbr %x\n",
1677 	    istat, dstat, sstat0, intcode,
1678 	    osiop_read_4(sc, OSIOP_DSA),
1679 	    osiop_read_1(sc, OSIOP_SBCL),
1680 	    ds->stat[0], ds->msgbuf[0], ds->msgbuf[1],
1681 	    osiop_read_1(sc, OSIOP_SFBR));
1682 #ifdef OSIOP_DEBUG
1683 	if (osiop_debug & DEBUG_DMA)
1684 		panic("osiop_chkintr: **** temp ****");
1685 #endif
1686 #ifdef DDB
1687 	Debugger();
1688 #endif
1689 	osiop_reset(sc);	/* hard reset */
1690 	*status = SCSI_OSIOP_NOSTATUS;
1691 	acb->status = ACB_S_DONE;
1692 	return (0);		/* osiop_reset cleaned up */
1693 }
1694 
1695 void
1696 osiop_select(struct osiop_softc *sc)
1697 {
1698 	struct osiop_acb *acb = sc->sc_nexus;
1699 
1700 #ifdef OSIOP_DEBUG
1701 	if (osiop_debug & DEBUG_CMD)
1702 		printf("%s: select ", sc->sc_dev.dv_xname);
1703 #endif
1704 
1705 	if (acb->xs->xs_control & XS_CTL_POLL || sc->sc_flags & OSIOP_NODMA) {
1706 		sc->sc_flags |= OSIOP_INTSOFF;
1707 		sc->sc_flags &= ~OSIOP_INTDEFER;
1708 		if ((osiop_read_1(sc, OSIOP_ISTAT) & OSIOP_ISTAT_CON) == 0) {
1709 			osiop_write_1(sc, OSIOP_SIEN, 0);
1710 			osiop_write_1(sc, OSIOP_DIEN, 0);
1711 		}
1712 #if 0
1713 	} else if ((sc->sc_flags & OSIOP_INTDEFER) == 0) {
1714 		sc->sc_flags &= ~OSIOP_INTSOFF;
1715 		if ((osiop_read_1(sc, OSIOP_ISTAT) & OSIOP_ISTAT_CON) == 0) {
1716 			osiop_write_1(sc, OSIOP_SIEN, sc->sc_sien);
1717 			osiop_write_1(sc, OSIOP_DIEN, sc->sc_dien);
1718 		}
1719 #endif
1720 	}
1721 #ifdef OSIOP_DEBUG
1722 	if (osiop_debug & DEBUG_CMD)
1723 		printf("osiop_select: target %x cmd %02x ds %p\n",
1724 		    acb->xs->xs_periph->periph_target,
1725 		    acb->xs->cmd->opcode, sc->sc_nexus->ds);
1726 #endif
1727 
1728 	osiop_start(sc);
1729 
1730 	return;
1731 }
1732 
1733 /*
1734  * 53C710 interrupt handler
1735  */
1736 
1737 void
1738 osiop_intr(struct osiop_softc *sc)
1739 {
1740 	int status, s;
1741 	uint8_t istat, dstat, sstat0;
1742 
1743 	s = splbio();
1744 
1745 	istat = sc->sc_istat;
1746 	if ((istat & (OSIOP_ISTAT_SIP | OSIOP_ISTAT_DIP)) == 0) {
1747 		splx(s);
1748 		return;
1749 	}
1750 
1751 	/* Got a valid interrupt on this device; set by MD handler */
1752 	dstat = sc->sc_dstat;
1753 	sstat0 = sc->sc_sstat0;
1754 	sc->sc_istat = 0;
1755 #ifdef OSIOP_DEBUG
1756 	if (!sc->sc_active) {
1757 		/* XXX needs sync */
1758 		printf("%s: spurious interrupt? "
1759 		    "istat %x dstat %x sstat0 %x nexus %p status %x\n",
1760 		    sc->sc_dev.dv_xname, istat, dstat, sstat0, sc->sc_nexus,
1761 		    (sc->sc_nexus != NULL) ? sc->sc_nexus->ds->stat[0] : 0);
1762 	}
1763 #endif
1764 
1765 #ifdef OSIOP_DEBUG
1766 	if (osiop_debug & (DEBUG_INT|DEBUG_CMD)) {
1767 		/* XXX needs sync */
1768 		printf("%s: intr istat %x dstat %x sstat0 %x dsps %x "
1769 		    "sbcl %x dsp %x dcmd %x sts %x msg %x\n",
1770 		    sc->sc_dev.dv_xname,
1771 		    istat, dstat, sstat0,
1772 		    osiop_read_4(sc, OSIOP_DSPS),
1773 		    osiop_read_1(sc, OSIOP_SBCL),
1774 		    osiop_read_4(sc, OSIOP_DSP),
1775 		    osiop_read_4(sc, OSIOP_DBC),
1776 		    (sc->sc_nexus != NULL) ? sc->sc_nexus->ds->stat[0] : 0,
1777 		    (sc->sc_nexus != NULL) ? sc->sc_nexus->ds->msgbuf[0] : 0);
1778 	}
1779 #endif
1780 	if (sc->sc_flags & OSIOP_INTDEFER) {
1781 		sc->sc_flags &= ~(OSIOP_INTDEFER | OSIOP_INTSOFF);
1782 		osiop_write_1(sc, OSIOP_SIEN, sc->sc_sien);
1783 		osiop_write_1(sc, OSIOP_DIEN, sc->sc_dien);
1784 	}
1785 	if (osiop_checkintr(sc, istat, dstat, sstat0, &status)) {
1786 #if 0
1787 		if (status == SCSI_OSIOP_NOSTATUS)
1788 			printf("osiop_intr: no valid status \n");
1789 #endif
1790 		if ((sc->sc_flags & (OSIOP_INTSOFF | OSIOP_INTDEFER)) !=
1791 		    OSIOP_INTSOFF) {
1792 #if 0
1793 			if (osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) {
1794 				struct scsipi_periph *periph;
1795 
1796 				periph = sc->sc_nexus->xs->xs_periph;
1797 				printf("%s: SCSI bus busy at completion"
1798 				    " targ %d sbcl %02x sfbr %x lcrc "
1799 				    "%02x dsp +%x\n", sc->sc_dev.dv_xname,
1800 				    periph->periphtarget,
1801 				    osiop_read_1(sc, OSIOP_SBCL),
1802 				    osiop_read_1(sc, OSIOP_SFBR),
1803 				    osiop_read_1(sc, OSIOP_LCRC),
1804 				    osiop_read_4(sc, OSIOP_DSP) -
1805 				        sc->sc_scrdma->dm_segs[0].ds_addr);
1806 			}
1807 #endif
1808 			osiop_scsidone(sc->sc_nexus, status);
1809 		}
1810 	}
1811 	splx(s);
1812 }
1813 
1814 void
1815 osiop_update_xfer_mode(struct osiop_softc *sc, int target)
1816 {
1817 	struct osiop_tinfo *tinfo = &sc->sc_tinfo[target];
1818 	struct scsipi_xfer_mode xm;
1819 
1820 	xm.xm_target = target;
1821 	xm.xm_mode = 0;
1822 	xm.xm_period = 0;
1823 	xm.xm_offset = 0;
1824 
1825 	if (tinfo->period) {
1826 		xm.xm_mode |= PERIPH_CAP_SYNC;
1827 		xm.xm_period = tinfo->period;
1828 		xm.xm_offset = tinfo->offset;
1829 	}
1830 
1831 	scsipi_async_event(&sc->sc_channel, ASYNC_EVENT_XFER_MODE, &xm);
1832 }
1833 
1834 void
1835 scsi_period_to_osiop(struct osiop_softc *sc, int target)
1836 {
1837 	int period, offset, sxfer, sbcl;
1838 
1839 	period = sc->sc_tinfo[target].period;
1840 	offset = sc->sc_tinfo[target].offset;
1841 	for (sbcl = 1; sbcl < 4; sbcl++) {
1842 		sxfer = (period * 4 - 1) / sc->sc_tcp[sbcl] - 3;
1843 		if (sxfer >= 0 && sxfer <= 7)
1844 			break;
1845 	}
1846 	if (sbcl > 3) {
1847 		printf("osiop sync: unable to compute sync params "
1848 		    "for period %d ns\n", period * 4);
1849 		/*
1850 		 * XXX need to pick a value we can do and renegotiate
1851 		 */
1852 		sxfer = sbcl = 0;
1853 	} else {
1854 		sxfer = (sxfer << 4) | ((offset <= OSIOP_MAX_OFFSET) ?
1855 		    offset : OSIOP_MAX_OFFSET);
1856 #ifdef DEBUG_SYNC
1857 		printf("osiop sync: params for period %dns: sxfer %x sbcl %x",
1858 		    period * 4, sxfer, sbcl);
1859 		printf(" actual period %dns\n",
1860 		    sc->sc_tcp[sbcl] * ((sxfer >> 4) + 4));
1861 #endif
1862 	}
1863 	sc->sc_tinfo[target].sxfer = sxfer;
1864 	sc->sc_tinfo[target].sbcl = sbcl;
1865 #ifdef DEBUG_SYNC
1866 	printf("osiop sync: osiop_sxfr %02x, osiop_sbcl %02x\n", sxfer, sbcl);
1867 #endif
1868 }
1869 
1870 void
1871 osiop_timeout(void *arg)
1872 {
1873 	struct osiop_acb *acb = arg;
1874 	struct scsipi_xfer *xs = acb->xs;
1875 	struct osiop_softc *sc = acb->sc;
1876 	int s;
1877 
1878 	scsipi_printaddr(xs->xs_periph);
1879 	printf("command timeout\n");
1880 
1881 	s = splbio();
1882 	/* reset the scsi bus */
1883 	osiop_resetbus(sc);
1884 
1885 	/* deactivate callout */
1886 	callout_stop(&xs->xs_callout);
1887 	acb->flags |= ACB_F_TIMEOUT;
1888 	osiop_reset(sc);
1889 	splx(s);
1890 	return;
1891 }
1892 
1893 #ifdef OSIOP_DEBUG
1894 
1895 #if OSIOP_TRACE_SIZE
1896 void
1897 osiop_dump_trace(void)
1898 {
1899 	int i;
1900 
1901 	printf("osiop trace: next index %d\n", osiop_trix);
1902 	i = osiop_trix;
1903 	do {
1904 		printf("%3d: '%c' %02x %02x %02x\n", i,
1905 		    osiop_trbuf[i], osiop_trbuf[i + 1],
1906 		    osiop_trbuf[i + 2], osiop_trbuf[i + 3]);
1907 		i = (i + 4) & (OSIOP_TRACE_SIZE - 1);
1908 	} while (i != osiop_trix);
1909 }
1910 #endif
1911 
1912 void
1913 osiop_dump_acb(struct osiop_acb *acb)
1914 {
1915 	uint8_t *b;
1916 	int i;
1917 
1918 	printf("acb@%p ", acb);
1919 	if (acb->xs == NULL) {
1920 		printf("<unused>\n");
1921 		return;
1922 	}
1923 
1924 	b = (uint8_t *)&acb->xs->cmd;
1925 	printf("(%d:%d) status %2x cmdlen %2ld cmd ",
1926 	    acb->xs->xs_periph->periph_target,
1927 	    acb->xs->xs_periph->periph_lun, acb->status, acb->cmdlen);
1928 	for (i = acb->cmdlen; i > 0; i--)
1929 		printf(" %02x", *b++);
1930 	printf("\n");
1931 	printf("  xs: %p data %p:%04x ", acb->xs, acb->xs->data,
1932 	    acb->xs->datalen);
1933 	printf("va %p:%lx ", acb->data, acb->datalen);
1934 	printf("cur %lx:%lx\n", acb->curaddr, acb->curlen);
1935 }
1936 
1937 void
1938 osiop_dump(struct osiop_softc *sc)
1939 {
1940 	struct osiop_acb *acb;
1941 	int i, s;
1942 
1943 	s = splbio();
1944 #if OSIOP_TRACE_SIZE
1945 	osiop_dump_trace();
1946 #endif
1947 	printf("%s@%p istat %02x\n",
1948 	    sc->sc_dev.dv_xname, sc, osiop_read_1(sc, OSIOP_ISTAT));
1949 	if ((acb = TAILQ_FIRST(&sc->free_list)) != NULL) {
1950 		printf("Free list:\n");
1951 		while (acb) {
1952 			osiop_dump_acb(acb);
1953 			acb = TAILQ_NEXT(acb, chain);
1954 		}
1955 	}
1956 	if ((acb = TAILQ_FIRST(&sc->ready_list)) != NULL) {
1957 		printf("Ready list:\n");
1958 		while (acb) {
1959 			osiop_dump_acb(acb);
1960 			acb = TAILQ_NEXT(acb, chain);
1961 		}
1962 	}
1963 	if ((acb = TAILQ_FIRST(&sc->nexus_list)) != NULL) {
1964 		printf("Nexus list:\n");
1965 		while (acb) {
1966 			osiop_dump_acb(acb);
1967 			acb = TAILQ_NEXT(acb, chain);
1968 		}
1969 	}
1970 	if (sc->sc_nexus) {
1971 		printf("Nexus:\n");
1972 		osiop_dump_acb(sc->sc_nexus);
1973 	}
1974 	for (i = 0; i < OSIOP_NTGT; i++) {
1975 		if (sc->sc_tinfo[i].cmds > 2) {
1976 			printf("tgt %d: cmds %d disc %d lubusy %x\n",
1977 			    i, sc->sc_tinfo[i].cmds,
1978 			    sc->sc_tinfo[i].dconns,
1979 			    sc->sc_tinfo[i].lubusy);
1980 		}
1981 	}
1982 	splx(s);
1983 }
1984 #endif
1985