xref: /netbsd-src/sys/dev/ic/nslm7xvar.h (revision e5548b402ae4c44fb816de42c7bba9581ce23ef5)
1 /*	$NetBSD: nslm7xvar.h,v 1.17 2005/12/11 12:21:28 christos Exp $ */
2 
3 /*-
4  * Copyright (c) 2000 The NetBSD Foundation, Inc.
5  * All rights reserved.
6  *
7  * This code is derived from software contributed to The NetBSD Foundation
8  * by Bill Squier.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. All advertising materials mentioning features or use of this software
19  *    must display the following acknowledgement:
20  *        This product includes software developed by the NetBSD
21  *        Foundation, Inc. and its contributors.
22  * 4. Neither the name of The NetBSD Foundation nor the names of its
23  *    contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
27  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
28  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
29  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
30  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
31  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
32  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
33  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
34  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
35  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
36  * POSSIBILITY OF SUCH DAMAGE.
37  */
38 
39 #ifndef _DEV_ISA_NSLM7XVAR_H_
40 #define _DEV_ISA_NSLM7XVAR_H_
41 
42 /* ctl registers */
43 
44 #define LMC_ADDR	0x05
45 #define LMC_DATA	0x06
46 
47 /* data registers */
48 
49 #define LMD_SENSORBASE	0x20	/* Sensors occupy 0x20 -- 0x2a */
50 
51 #define LMD_CONFIG	0x40	/* Configuration */
52 #define LMD_ISR1	0x41	/* Interrupt Status 1 */
53 #define LMD_ISR2	0x42	/* Interrupt Status 2 */
54 #define LMD_SMI1	0x43	/* SMI Mask 1 */
55 #define LMD_SMI2	0x44	/* SMI Mask 2 */
56 #define LMD_NMI1	0x45	/* NMI Mask 1 */
57 #define LMD_NMI2	0x46	/* NMI Mask 2 */
58 #define LMD_VIDFAN	0x47	/* VID/Fan Divisor */
59 #define LMD_SBUSADDR	0x48	/* Serial Bus Address */
60 #define LMD_CHIPID	0x49	/* Chip Reset/ID */
61 
62 /* misc constants */
63 
64 #define LM_NUM_SENSORS	11
65 #define LM_ID_LM78	0x00
66 #define LM_ID_LM78J	0x40
67 #define LM_ID_LM79	0xC0
68 #define LM_ID_LM81	0x80
69 #define LM_ID_MASK	0xFE
70 
71 /*
72  * additional registers for the Winbond chips:
73  * WB83781D: mostly lm7x compatible; extra temp sensors in bank1 & 2
74  * WB83782D & WB83627HF: voltage sensors needs different handling, more FAN
75  *                       dividers; mode voltage sensors, more temp sensors.
76  */
77 #define WB_T23ADDR	0x4A	/* temp sens 2/3 I2C addr */
78 #define WB_PIN		0x4B	/* pin & fan3 divider */
79 #define WB_BANKSEL	0x4E	/* banck select register */
80 #define WB_BANKSEL_B0	0x00	/* select bank 0 */
81 #define WB_BANKSEL_B1	0x01	/* select bank 1 */
82 #define WB_BANKSEL_B2	0x02	/* select bank 2 */
83 #define WB_BANKSEL_B3	0x03	/* select bank 3 */
84 #define WB_BANKSEL_B4	0x04	/* select bank 4 */
85 #define WB_BANKSEL_B5	0x05	/* select bank 5 */
86 #define WB_BANKSEL_HBAC	0x80	/* hight byte access */
87 
88 #define WB_VENDID	0x4F	/* vendor ID register */
89 #define WB_VENDID_WINBOND 0x5CA3
90 /* Bank0 regs */
91 #define WB_BANK0_CHIPID	0x58
92 #define WB_CHIPID_83781		0x10
93 #define WB_CHIPID_83781_2	0x11
94 #define WB_CHIPID_83782		0x30
95 #define WB_CHIPID_83627		0x21
96 #define WB_CHIPID_83627THF	0x90
97 #define WB_CHIPID_83697		0x60
98 #define WB_BANK0_FANBAT	0x5D
99 /* Bank1 regs */
100 #define WB_BANK1_T2H	0x50
101 #define WB_BANK1_T2L	0x51
102 
103 /* Bank2 regs */
104 #define WB_BANK2_T3H	0x50
105 #define WB_BANK2_T3L	0x51
106 
107 /* Bank4 regs 83782/83627 only */
108 #define WB_BANK4_T1OFF	0x54
109 #define WB_BANK4_T2OFF	0x55
110 #define WB_BANK4_T3OFF	0x56
111 
112 /* Bank5 regs 83782/83627 only */
113 #define WB_BANK5_5VSB	0x50
114 #define WB_BANK5_VBAT	0x51
115 
116 #define WB83781_NUM_SENSORS	13
117 #define WB83697_NUM_SENSORS	14
118 #define WB_NUM_SENSORS	15
119 
120 /*
121  * registers for the environment controller built into
122  * the IT8705F super-i/o chip
123  */
124 #define ITEC_FANDIV	0x0b	/* fan divisor */
125 #define ITEC_FAN1	0x0d	/* fan1 tachometer */
126 #define ITEC_FAN2	0x0e	/* fan2 tachometer */
127 #define ITEC_FAN3	0x0f	/* fan3 tachometer */
128 #define ITEC_VIN0	0x20	/* VIN0 voltage */
129 #define ITEC_VIN1	0x21	/* VIN1 voltage */
130 #define ITEC_VIN2	0x22	/* VIN2 voltage */
131 #define ITEC_VIN3	0x23	/* VIN3 voltage */
132 #define ITEC_VIN4	0x24	/* VIN4 voltage */
133 #define ITEC_VIN5	0x25	/* VIN5 voltage */
134 #define ITEC_VIN6	0x26	/* VIN6 voltage */
135 #define ITEC_VIN7	0x27	/* VIN7 voltage */
136 #define ITEC_VBAT	0x28	/* VBAT voltage */
137 #define ITEC_TEMP1	0x29	/* TMPIN1 temperature */
138 #define ITEC_TEMP2	0x30	/* TMPIN1 temperature */
139 #define ITEC_TEMP3	0x31	/* TMPIN1 temperature */
140 #define ITEC_RES48	0x48	/* reserved, used for probing the chip */
141 #define ITEC_RES52	0x52	/* reserved, used for probing the chip */
142 #define	ITEC_VENDID	0x58	/* vendor ID register */
143 #define ITEC_COREID	0x5b	/* core ID register, only 8712F */
144 
145 /*
146  * misc values
147  */
148 #define ITEC_VENDID_ITE		0x90	/* iTE vendor ID */
149 #define ITEC_COREID_ITE		0x12	/* iTE core ID */
150 #define ITEC_RES48_DEFAULT	0x2d
151 #define ITEC_RES52_DEFAULT	0x7f
152 #define ITEC_NUM_SENSORS	15
153 #define ITEC_VREF		4096	/* VREF in mV */
154 
155 
156 struct lm_softc {
157 	struct	device sc_dev;
158 
159 	int	lm_iobase;
160 	bus_space_tag_t lm_iot;
161 	bus_space_handle_t lm_ioh;
162 
163 	int	sc_flags;
164 	struct	timeval lastread; /* only allow reads every 1.5 seconds */
165 	struct	envsys_tre_data sensors[WB_NUM_SENSORS];
166 	struct	envsys_basic_info info[WB_NUM_SENSORS];
167 	u_int numsensors;
168 	void (*refresh_sensor_data)(struct lm_softc *);
169 
170 	int (*lm_banksel)(struct lm_softc *, int);
171 	u_int8_t (*lm_readreg)(struct lm_softc *, int);
172 	void (*lm_writereg)(struct lm_softc *, int, int);
173 
174 	struct sysmon_envsys sc_sysmon;
175 };
176 
177 void lm_attach(struct lm_softc *);
178 int lm_probe(bus_space_tag_t, bus_space_handle_t);
179 
180 #endif /* _DEV_ISA_NSLM7XVAR_H_ */
181