xref: /netbsd-src/sys/dev/ic/comvar.h (revision 8b0f9554ff8762542c4defc4f70e1eb76fb508fa)
1 /*	$NetBSD: comvar.h,v 1.58 2007/12/14 03:36:55 dyoung Exp $	*/
2 
3 /*
4  * Copyright (c) 1996 Christopher G. Demetriou.  All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  * 3. All advertising materials mentioning features or use of this software
15  *    must display the following acknowledgement:
16  *      This product includes software developed by Christopher G. Demetriou
17  *	for the NetBSD Project.
18  * 4. The name of the author may not be used to endorse or promote products
19  *    derived from this software without specific prior written permission
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
22  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
23  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
24  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
25  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
26  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
30  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31  */
32 
33 #include "rnd.h"
34 #include "opt_multiprocessor.h"
35 #include "opt_lockdebug.h"
36 #include "opt_com.h"
37 #include "opt_kgdb.h"
38 
39 #if NRND > 0 && defined(RND_COM)
40 #include <sys/rnd.h>
41 #endif
42 
43 #include <sys/callout.h>
44 #include <sys/timepps.h>
45 #include <sys/mutex.h>
46 
47 #include <dev/ic/comreg.h>	/* for COM_NPORTS */
48 
49 struct com_regs;
50 
51 int comcnattach(bus_space_tag_t, bus_addr_t, int, int, int, tcflag_t);
52 int comcnattach1(struct com_regs *, int, int, int, tcflag_t);
53 
54 #ifdef KGDB
55 int com_kgdb_attach(bus_space_tag_t, bus_addr_t, int, int, int, tcflag_t);
56 int com_kgdb_attach1(struct com_regs *, int, int, int, tcflag_t);
57 #endif
58 
59 int com_is_console(bus_space_tag_t, bus_addr_t, bus_space_handle_t *);
60 
61 /* Hardware flag masks */
62 #define	COM_HW_NOIEN	0x01
63 #define	COM_HW_FIFO	0x02
64 		/*	0x04	free for use */
65 #define	COM_HW_FLOW	0x08
66 #define	COM_HW_DEV_OK	0x20
67 #define	COM_HW_CONSOLE	0x40
68 #define	COM_HW_KGDB	0x80
69 #define	COM_HW_TXFIFO_DISABLE	0x100
70 #define	COM_HW_NO_TXPRELOAD	0x200
71 
72 /* Buffer size for character buffer */
73 #define	COM_RING_SIZE	2048
74 
75 #ifdef	COM_REGMAP
76 #define	COM_REG_RXDATA		0
77 #define	COM_REG_TXDATA		1
78 #define	COM_REG_DLBL		2
79 #define	COM_REG_DLBH		3
80 #define	COM_REG_IER		4
81 #define	COM_REG_IIR		5
82 #define	COM_REG_FIFO		6
83 #define	COM_REG_EFR		7
84 #define	COM_REG_LCR		8
85 #define	COM_REG_MCR		9
86 #define	COM_REG_LSR		10
87 #define	COM_REG_MSR		11
88 
89 struct com_regs {
90 	bus_space_tag_t		cr_iot;
91 	bus_space_handle_t	cr_ioh;
92 	bus_addr_t		cr_iobase;
93 	bus_size_t		cr_nports;
94 	bus_size_t		cr_map[16];
95 };
96 
97 extern const bus_size_t com_std_map[16];
98 
99 #define	COM_INIT_REGS(regs, tag, hdl, addr)				\
100 	do {								\
101 		regs.cr_iot = tag;					\
102 		regs.cr_ioh = hdl;					\
103 		regs.cr_iobase = addr;					\
104 		regs.cr_nports = COM_NPORTS;				\
105 		memcpy(regs.cr_map, com_std_map, sizeof (regs.cr_map));	\
106 	} while (0)
107 
108 #else
109 #define	COM_REG_RXDATA		com_data
110 #define	COM_REG_TXDATA		com_data
111 #define	COM_REG_DLBL		com_dlbl
112 #define	COM_REG_DLBH		com_dlbh
113 #define	COM_REG_IER		com_ier
114 #define	COM_REG_IIR		com_iir
115 #define	COM_REG_FIFO		com_fifo
116 #define	COM_REG_EFR		com_efr
117 #define	COM_REG_LCR		com_lctl
118 #define	COM_REG_MCR		com_mcr
119 #define	COM_REG_LSR		com_lsr
120 #define	COM_REG_MSR		com_msr
121 
122 struct com_regs {
123 	bus_space_tag_t		cr_iot;
124 	bus_space_handle_t	cr_ioh;
125 	bus_addr_t		cr_iobase;
126 	bus_size_t		cr_nports;
127 };
128 
129 #define	COM_INIT_REGS(regs, tag, hdl, addr)		\
130 	do {						\
131 		regs.cr_iot = tag;			\
132 		regs.cr_ioh = hdl;			\
133 		regs.cr_iobase = addr;			\
134 		regs.cr_nports = COM_NPORTS;		\
135 	} while (0)
136 
137 #endif
138 
139 struct com_softc {
140 	struct device sc_dev;
141 	void *sc_si;
142 	struct tty *sc_tty;
143 
144 	struct callout sc_diag_callout;
145 
146 	int sc_frequency;
147 
148 	struct com_regs sc_regs;
149 	bus_space_handle_t sc_hayespioh;
150 
151 
152 	u_int sc_overflows,
153 	      sc_floods,
154 	      sc_errors;
155 
156 	int sc_hwflags,
157 	    sc_swflags;
158 	u_int sc_fifolen;
159 
160 	u_int sc_r_hiwat,
161 	      sc_r_lowat;
162 	u_char *volatile sc_rbget,
163 	       *volatile sc_rbput;
164  	volatile u_int sc_rbavail;
165 	u_char *sc_rbuf,
166 	       *sc_ebuf;
167 
168  	u_char *sc_tba;
169  	u_int sc_tbc,
170 	      sc_heldtbc;
171 
172 	volatile u_char sc_rx_flags,
173 #define	RX_TTY_BLOCKED		0x01
174 #define	RX_TTY_OVERFLOWED	0x02
175 #define	RX_IBUF_BLOCKED		0x04
176 #define	RX_IBUF_OVERFLOWED	0x08
177 #define	RX_ANY_BLOCK		0x0f
178 			sc_tx_busy,
179 			sc_tx_done,
180 			sc_tx_stopped,
181 			sc_st_check,
182 			sc_rx_ready;
183 
184 	volatile u_char sc_heldchange;
185 	volatile u_char sc_msr, sc_msr_delta, sc_msr_mask, sc_mcr,
186 	    sc_mcr_active, sc_lcr, sc_ier, sc_fifo, sc_dlbl, sc_dlbh, sc_efr;
187 	u_char sc_mcr_dtr, sc_mcr_rts, sc_msr_cts, sc_msr_dcd;
188 
189 #ifdef COM_HAYESP
190 	u_char sc_prescaler;
191 #endif
192 
193 	/*
194 	 * There are a great many almost-ns16550-compatible UARTs out
195 	 * there, which have minor differences.  The type field here
196 	 * lets us distinguish between them.
197 	 */
198 	int sc_type;
199 #define	COM_TYPE_NORMAL		0	/* normal 16x50 */
200 #define	COM_TYPE_HAYESP		1	/* Hayes ESP modem */
201 #define	COM_TYPE_PXA2x0		2	/* Intel PXA2x0 processor built-in */
202 #define	COM_TYPE_AU1x00		3	/* AMD/Alchemy Au1x000 proc. built-in */
203 
204 	/* power management hooks */
205 	int (*enable)(struct com_softc *);
206 	void (*disable)(struct com_softc *);
207 	int enabled;
208 
209 #ifdef __HAVE_TIMECOUNTER
210 	struct pps_state sc_pps_state;	/* pps state */
211 #else /* !__HAVE_TIMECOUNTER */
212 	/* PPS signal on DCD, with or without inkernel clock disciplining */
213 	u_char	sc_ppsmask;			/* pps signal mask */
214 	u_char	sc_ppsassert;			/* pps leading edge */
215 	u_char	sc_ppsclear;			/* pps trailing edge */
216 	pps_info_t ppsinfo;
217 	pps_params_t ppsparam;
218 #endif /* !__HAVE_TIMECOUNTER */
219 
220 #if NRND > 0 && defined(RND_COM)
221 	rndsource_element_t  rnd_source;
222 #endif
223 	void			*sc_powerhook;	/* power management hook */
224 	kmutex_t		sc_lock;
225 };
226 
227 int comprobe1(bus_space_tag_t, bus_space_handle_t);
228 int comintr(void *);
229 void com_attach_subr(struct com_softc *);
230 int com_probe_subr(struct com_regs *);
231 int com_detach(struct device *, int);
232 bool com_resume(device_t);
233 int com_activate(struct device *, enum devact);
234 void com_cleanup(void *);
235 
236 #ifndef IPL_SERIAL
237 #define	IPL_SERIAL	IPL_TTY
238 #define	splserial()	spltty()
239 #endif
240