1 /* $NetBSD: aic79xx.c,v 1.30 2005/02/27 00:27:00 perry Exp $ */ 2 3 /* 4 * Core routines and tables shareable across OS platforms. 5 * 6 * Copyright (c) 1994-2002 Justin T. Gibbs. 7 * Copyright (c) 2000-2003 Adaptec Inc. 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions, and the following disclaimer, 15 * without modification. 16 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 17 * substantially similar to the "NO WARRANTY" disclaimer below 18 * ("Disclaimer") and any redistribution must be conditioned upon 19 * including a substantially similar Disclaimer requirement for further 20 * binary redistribution. 21 * 3. Neither the names of the above-listed copyright holders nor the names 22 * of any contributors may be used to endorse or promote products derived 23 * from this software without specific prior written permission. 24 * 25 * Alternatively, this software may be distributed under the terms of the 26 * GNU General Public License ("GPL") version 2 as published by the Free 27 * Software Foundation. 28 * 29 * NO WARRANTY 30 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 31 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 32 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 33 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 34 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 35 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 36 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 37 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 38 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 39 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 40 * POSSIBILITY OF SUCH DAMAGES. 41 * 42 * Id: //depot/aic7xxx/aic7xxx/aic79xx.c#202 $ 43 * 44 * $FreeBSD: src/sys/dev/aic7xxx/aic79xx.c,v 1.24 2003/06/28 04:46:54 gibbs Exp $ 45 */ 46 /* 47 * Ported from FreeBSD by Pascal Renauld, Network Storage Solutions, Inc. 48 * - April 2003 49 */ 50 51 #include <sys/cdefs.h> 52 __KERNEL_RCSID(0, "$NetBSD: aic79xx.c,v 1.30 2005/02/27 00:27:00 perry Exp $"); 53 54 #include <dev/ic/aic79xx_osm.h> 55 #include <dev/ic/aic79xx_inline.h> 56 #include <dev/ic/aic7xxx_cam.h> 57 58 #include <dev/microcode/aic7xxx/aicasm.h> 59 #include <dev/microcode/aic7xxx/aicasm_insformat.h> 60 61 62 /******************************** Globals *************************************/ 63 struct ahd_softc_tailq ahd_tailq = TAILQ_HEAD_INITIALIZER(ahd_tailq); 64 65 /***************************** Lookup Tables **********************************/ 66 char *ahd_chip_names[] = 67 { 68 "NONE", 69 "aic7901", 70 "aic7902", 71 "aic7901A" 72 }; 73 74 /* 75 * Hardware error codes. 76 */ 77 struct ahd_hard_error_entry { 78 uint8_t errno; 79 char *errmesg; 80 }; 81 82 static struct ahd_hard_error_entry ahd_hard_errors[] = { 83 { DSCTMOUT, "Discard Timer has timed out" }, 84 { ILLOPCODE, "Illegal Opcode in sequencer program" }, 85 { SQPARERR, "Sequencer Parity Error" }, 86 { DPARERR, "Data-path Parity Error" }, 87 { MPARERR, "Scratch or SCB Memory Parity Error" }, 88 { CIOPARERR, "CIOBUS Parity Error" }, 89 }; 90 static const u_int num_errors = NUM_ELEMENTS(ahd_hard_errors); 91 92 static struct ahd_phase_table_entry ahd_phase_table[] = 93 { 94 { P_DATAOUT, MSG_NOOP, "in Data-out phase" }, 95 { P_DATAIN, MSG_INITIATOR_DET_ERR, "in Data-in phase" }, 96 { P_DATAOUT_DT, MSG_NOOP, "in DT Data-out phase" }, 97 { P_DATAIN_DT, MSG_INITIATOR_DET_ERR, "in DT Data-in phase" }, 98 { P_COMMAND, MSG_NOOP, "in Command phase" }, 99 { P_MESGOUT, MSG_NOOP, "in Message-out phase" }, 100 { P_STATUS, MSG_INITIATOR_DET_ERR, "in Status phase" }, 101 { P_MESGIN, MSG_PARITY_ERROR, "in Message-in phase" }, 102 { P_BUSFREE, MSG_NOOP, "while idle" }, 103 { 0, MSG_NOOP, "in unknown phase" } 104 }; 105 106 /* 107 * In most cases we only wish to itterate over real phases, so 108 * exclude the last element from the count. 109 */ 110 static const u_int num_phases = NUM_ELEMENTS(ahd_phase_table) - 1; 111 112 /* Our Sequencer Program */ 113 #include <dev/microcode/aic7xxx/aic79xx_seq.h> 114 115 /**************************** Function Declarations ***************************/ 116 static void ahd_handle_transmission_error(struct ahd_softc *ahd); 117 static void ahd_handle_lqiphase_error(struct ahd_softc *ahd, 118 u_int lqistat1); 119 static int ahd_handle_pkt_busfree(struct ahd_softc *ahd, 120 u_int busfreetime); 121 static int ahd_handle_nonpkt_busfree(struct ahd_softc *ahd); 122 static void ahd_handle_proto_violation(struct ahd_softc *ahd); 123 static void ahd_force_renegotiation(struct ahd_softc *ahd, 124 struct ahd_devinfo *devinfo); 125 126 static struct ahd_tmode_tstate* 127 ahd_alloc_tstate(struct ahd_softc *ahd, 128 u_int scsi_id, char channel); 129 #ifdef AHD_TARGET_MODE 130 static void ahd_free_tstate(struct ahd_softc *ahd, 131 u_int scsi_id, char channel, int force); 132 #endif 133 static void ahd_devlimited_syncrate(struct ahd_softc *ahd, 134 struct ahd_initiator_tinfo *, 135 u_int *period, 136 u_int *ppr_options, 137 role_t role); 138 static void ahd_update_neg_table(struct ahd_softc *ahd, 139 struct ahd_devinfo *devinfo, 140 struct ahd_transinfo *tinfo); 141 static void ahd_update_pending_scbs(struct ahd_softc *ahd); 142 static void ahd_fetch_devinfo(struct ahd_softc *ahd, 143 struct ahd_devinfo *devinfo); 144 static void ahd_scb_devinfo(struct ahd_softc *ahd, 145 struct ahd_devinfo *devinfo, 146 struct scb *scb); 147 static void ahd_setup_initiator_msgout(struct ahd_softc *ahd, 148 struct ahd_devinfo *devinfo, 149 struct scb *scb); 150 static void ahd_build_transfer_msg(struct ahd_softc *ahd, 151 struct ahd_devinfo *devinfo); 152 static void ahd_construct_sdtr(struct ahd_softc *ahd, 153 struct ahd_devinfo *devinfo, 154 u_int period, u_int offset); 155 static void ahd_construct_wdtr(struct ahd_softc *ahd, 156 struct ahd_devinfo *devinfo, 157 u_int bus_width); 158 static void ahd_construct_ppr(struct ahd_softc *ahd, 159 struct ahd_devinfo *devinfo, 160 u_int period, u_int offset, 161 u_int bus_width, u_int ppr_options); 162 static void ahd_clear_msg_state(struct ahd_softc *ahd); 163 static void ahd_handle_message_phase(struct ahd_softc *ahd); 164 typedef enum { 165 AHDMSG_1B, 166 AHDMSG_2B, 167 AHDMSG_EXT 168 } ahd_msgtype; 169 static int ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, 170 u_int msgval, int full); 171 static int ahd_parse_msg(struct ahd_softc *ahd, 172 struct ahd_devinfo *devinfo); 173 static int ahd_handle_msg_reject(struct ahd_softc *ahd, 174 struct ahd_devinfo *devinfo); 175 static void ahd_handle_ign_wide_residue(struct ahd_softc *ahd, 176 struct ahd_devinfo *devinfo); 177 static void ahd_reinitialize_dataptrs(struct ahd_softc *ahd); 178 static void ahd_handle_devreset(struct ahd_softc *ahd, 179 struct ahd_devinfo *devinfo, 180 u_int lun, cam_status status, 181 char *message, int verbose_level); 182 #if AHD_TARGET_MODE 183 static void ahd_setup_target_msgin(struct ahd_softc *ahd, 184 struct ahd_devinfo *devinfo, 185 struct scb *scb); 186 #endif 187 188 static u_int ahd_sglist_size(struct ahd_softc *ahd); 189 static u_int ahd_sglist_allocsize(struct ahd_softc *ahd); 190 static void ahd_initialize_hscbs(struct ahd_softc *ahd); 191 static int ahd_init_scbdata(struct ahd_softc *ahd); 192 static void ahd_fini_scbdata(struct ahd_softc *ahd); 193 static void ahd_setup_iocell_workaround(struct ahd_softc *ahd); 194 static void ahd_iocell_first_selection(struct ahd_softc *ahd); 195 static void ahd_add_col_list(struct ahd_softc *ahd, 196 struct scb *scb, u_int col_idx); 197 static void ahd_rem_col_list(struct ahd_softc *ahd, 198 struct scb *scb); 199 static void ahd_chip_init(struct ahd_softc *ahd); 200 static void ahd_qinfifo_requeue(struct ahd_softc *ahd, 201 struct scb *prev_scb, 202 struct scb *scb); 203 static int ahd_qinfifo_count(struct ahd_softc *ahd); 204 static int ahd_search_scb_list(struct ahd_softc *ahd, int target, 205 char channel, int lun, u_int tag, 206 role_t role, uint32_t status, 207 ahd_search_action action, 208 u_int *list_head, u_int tid); 209 static void ahd_stitch_tid_list(struct ahd_softc *ahd, 210 u_int tid_prev, u_int tid_cur, 211 u_int tid_next); 212 static void ahd_add_scb_to_free_list(struct ahd_softc *ahd, 213 u_int scbid); 214 static u_int ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid, 215 u_int prev, u_int next, u_int tid); 216 static void ahd_reset_current_bus(struct ahd_softc *ahd); 217 static ahd_callback_t ahd_reset_poll; 218 static ahd_callback_t ahd_stat_timer; 219 #ifdef AHD_DUMP_SEQ 220 static void ahd_dumpseq(struct ahd_softc *ahd); 221 #endif 222 static void ahd_loadseq(struct ahd_softc *ahd); 223 static int ahd_check_patch(struct ahd_softc *ahd, 224 struct patch **start_patch, 225 u_int start_instr, u_int *skip_addr); 226 static u_int ahd_resolve_seqaddr(struct ahd_softc *ahd, 227 u_int address); 228 static void ahd_download_instr(struct ahd_softc *ahd, 229 u_int instrptr, uint8_t *dconsts); 230 static int ahd_probe_stack_size(struct ahd_softc *ahd); 231 static int ahd_scb_active_in_fifo(struct ahd_softc *ahd, 232 struct scb *scb); 233 static void ahd_run_data_fifo(struct ahd_softc *ahd, 234 struct scb *scb); 235 236 #ifdef AHD_TARGET_MODE 237 static void ahd_queue_lstate_event(struct ahd_softc *ahd, 238 struct ahd_tmode_lstate *lstate, 239 u_int initiator_id, 240 u_int event_type, 241 u_int event_arg); 242 static void ahd_update_scsiid(struct ahd_softc *ahd, 243 u_int targid_mask); 244 static int ahd_handle_target_cmd(struct ahd_softc *ahd, 245 struct target_cmd *cmd); 246 #endif 247 248 /************************** Added for porting to NetBSD ***********************/ 249 static int ahd_createdmamem(bus_dma_tag_t tag, 250 int size, 251 int flags, 252 bus_dmamap_t *mapp, 253 caddr_t *vaddr, 254 bus_addr_t *baddr, 255 bus_dma_segment_t *seg, 256 int *nseg, 257 const char *myname, const char *what); 258 259 static void ahd_freedmamem(bus_dma_tag_t tag, 260 int size, 261 bus_dmamap_t map, 262 caddr_t vaddr, 263 bus_dma_segment_t *seg, 264 int nseg); 265 266 /******************************** Private Inlines *****************************/ 267 static __inline void ahd_assert_atn(struct ahd_softc *ahd); 268 static __inline int ahd_currently_packetized(struct ahd_softc *ahd); 269 static __inline int ahd_set_active_fifo(struct ahd_softc *ahd); 270 271 static __inline void 272 ahd_assert_atn(struct ahd_softc *ahd) 273 { 274 ahd_outb(ahd, SCSISIGO, ATNO); 275 } 276 277 /* 278 * Determine if the current connection has a packetized 279 * agreement. This does not necessarily mean that we 280 * are currently in a packetized transfer. We could 281 * just as easily be sending or receiving a message. 282 */ 283 static __inline int 284 ahd_currently_packetized(struct ahd_softc *ahd) 285 { 286 ahd_mode_state saved_modes; 287 int packetized; 288 289 saved_modes = ahd_save_modes(ahd); 290 if ((ahd->bugs & AHD_PKTIZED_STATUS_BUG) != 0) { 291 /* 292 * The packetized bit refers to the last 293 * connection, not the current one. Check 294 * for non-zero LQISTATE instead. 295 */ 296 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 297 packetized = ahd_inb(ahd, LQISTATE) != 0; 298 } else { 299 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 300 packetized = ahd_inb(ahd, LQISTAT2) & PACKETIZED; 301 } 302 ahd_restore_modes(ahd, saved_modes); 303 return (packetized); 304 } 305 306 static __inline int 307 ahd_set_active_fifo(struct ahd_softc *ahd) 308 { 309 u_int active_fifo; 310 311 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 312 active_fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO; 313 switch (active_fifo) { 314 case 0: 315 case 1: 316 ahd_set_modes(ahd, active_fifo, active_fifo); 317 return (1); 318 default: 319 return (0); 320 } 321 } 322 323 /************************* Sequencer Execution Control ************************/ 324 /* 325 * Restart the sequencer program from address zero 326 */ 327 void 328 ahd_restart(struct ahd_softc *ahd) 329 { 330 331 ahd_pause(ahd); 332 333 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 334 335 /* No more pending messages */ 336 ahd_clear_msg_state(ahd); 337 ahd_outb(ahd, SCSISIGO, 0); /* De-assert BSY */ 338 ahd_outb(ahd, MSG_OUT, MSG_NOOP); /* No message to send */ 339 ahd_outb(ahd, SXFRCTL1, ahd_inb(ahd, SXFRCTL1) & ~BITBUCKET); 340 ahd_outb(ahd, SEQINTCTL, 0); 341 ahd_outb(ahd, LASTPHASE, P_BUSFREE); 342 ahd_outb(ahd, SEQ_FLAGS, 0); 343 ahd_outb(ahd, SAVED_SCSIID, 0xFF); 344 ahd_outb(ahd, SAVED_LUN, 0xFF); 345 346 /* 347 * Ensure that the sequencer's idea of TQINPOS 348 * matches our own. The sequencer increments TQINPOS 349 * only after it sees a DMA complete and a reset could 350 * occur before the increment leaving the kernel to believe 351 * the command arrived but the sequencer to not. 352 */ 353 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext); 354 355 /* Always allow reselection */ 356 ahd_outb(ahd, SCSISEQ1, 357 ahd_inb(ahd, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP)); 358 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 359 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET); 360 ahd_unpause(ahd); 361 } 362 363 void 364 ahd_clear_fifo(struct ahd_softc *ahd, u_int fifo) 365 { 366 ahd_mode_state saved_modes; 367 368 #ifdef AHD_DEBUG 369 if ((ahd_debug & AHD_SHOW_FIFOS) != 0) 370 printf("%s: Clearing FIFO %d\n", ahd_name(ahd), fifo); 371 #endif 372 saved_modes = ahd_save_modes(ahd); 373 ahd_set_modes(ahd, fifo, fifo); 374 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT); 375 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) 376 ahd_outb(ahd, CCSGCTL, CCSGRESET); 377 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 378 ahd_outb(ahd, SG_STATE, 0); 379 ahd_restore_modes(ahd, saved_modes); 380 } 381 382 /************************* Input/Output Queues ********************************/ 383 /* 384 * Flush and completed commands that are sitting in the command 385 * complete queues down on the chip but have yet to be DMA'ed back up. 386 */ 387 void 388 ahd_flush_qoutfifo(struct ahd_softc *ahd) 389 { 390 struct scb *scb; 391 ahd_mode_state saved_modes; 392 u_int saved_scbptr; 393 u_int ccscbctl; 394 u_int scbid; 395 u_int next_scbid; 396 397 saved_modes = ahd_save_modes(ahd); 398 399 /* 400 * Complete any SCBs that just finished being 401 * DMA'ed into the qoutfifo. 402 */ 403 ahd_run_qoutfifo(ahd); 404 405 /* 406 * Flush the good status FIFO for compelted packetized commands. 407 */ 408 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 409 saved_scbptr = ahd_get_scbptr(ahd); 410 while ((ahd_inb(ahd, LQISTAT2) & LQIGSAVAIL) != 0) { 411 u_int fifo_mode; 412 u_int i; 413 414 scbid = (ahd_inb(ahd, GSFIFO+1) << 8) 415 | ahd_inb(ahd, GSFIFO); 416 scb = ahd_lookup_scb(ahd, scbid); 417 if (scb == NULL) { 418 printf("%s: Warning - GSFIFO SCB %d invalid\n", 419 ahd_name(ahd), scbid); 420 continue; 421 } 422 /* 423 * Determine if this transaction is still active in 424 * any FIFO. If it is, we must flush that FIFO to 425 * the host before completing the command. 426 */ 427 fifo_mode = 0; 428 for (i = 0; i < 2; i++) { 429 /* Toggle to the other mode. */ 430 fifo_mode ^= 1; 431 ahd_set_modes(ahd, fifo_mode, fifo_mode); 432 if (ahd_scb_active_in_fifo(ahd, scb) == 0) 433 continue; 434 435 ahd_run_data_fifo(ahd, scb); 436 437 /* 438 * Clearing this transaction in this FIFO may 439 * cause a CFG4DATA for this same transaction 440 * to assert in the other FIFO. Make sure we 441 * loop one more time and check the other FIFO. 442 */ 443 i = 0; 444 } 445 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 446 ahd_set_scbptr(ahd, scbid); 447 if ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_LIST_NULL) == 0 448 && ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_FULL_RESID) != 0 449 || (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR) 450 & SG_LIST_NULL) != 0)) { 451 u_int comp_head; 452 453 /* 454 * The transfer completed with a residual. 455 * Place this SCB on the complete DMA list 456 * so that we Update our in-core copy of the 457 * SCB before completing the command. 458 */ 459 ahd_outb(ahd, SCB_SCSI_STATUS, 0); 460 ahd_outb(ahd, SCB_SGPTR, 461 ahd_inb_scbram(ahd, SCB_SGPTR) 462 | SG_STATUS_VALID); 463 ahd_outw(ahd, SCB_TAG, SCB_GET_TAG(scb)); 464 comp_head = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 465 ahd_outw(ahd, SCB_NEXT_COMPLETE, comp_head); 466 if (SCBID_IS_NULL(comp_head)) 467 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, 468 SCB_GET_TAG(scb)); 469 } else 470 ahd_complete_scb(ahd, scb); 471 } 472 ahd_set_scbptr(ahd, saved_scbptr); 473 474 /* 475 * Setup for command channel portion of flush. 476 */ 477 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 478 479 /* 480 * Wait for any inprogress DMA to complete and clear DMA state 481 * if this if for an SCB in the qinfifo. 482 */ 483 while (((ccscbctl = ahd_inb(ahd, CCSCBCTL)) & (CCARREN|CCSCBEN)) != 0) { 484 485 if ((ccscbctl & (CCSCBDIR|CCARREN)) == (CCSCBDIR|CCARREN)) { 486 if ((ccscbctl & ARRDONE) != 0) 487 break; 488 } else if ((ccscbctl & CCSCBDONE) != 0) 489 break; 490 ahd_delay(200); 491 } 492 if ((ccscbctl & CCSCBDIR) != 0) 493 ahd_outb(ahd, CCSCBCTL, ccscbctl & ~(CCARREN|CCSCBEN)); 494 495 saved_scbptr = ahd_get_scbptr(ahd); 496 /* 497 * Manually update/complete any completed SCBs that are waiting to be 498 * DMA'ed back up to the host. 499 */ 500 scbid = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 501 while (!SCBID_IS_NULL(scbid)) { 502 uint8_t *hscb_ptr; 503 u_int i; 504 505 ahd_set_scbptr(ahd, scbid); 506 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 507 scb = ahd_lookup_scb(ahd, scbid); 508 if (scb == NULL) { 509 printf("%s: Warning - DMA-up and complete " 510 "SCB %d invalid\n", ahd_name(ahd), scbid); 511 continue; 512 } 513 hscb_ptr = (uint8_t *)scb->hscb; 514 for (i = 0; i < sizeof(struct hardware_scb); i++) 515 *hscb_ptr++ = ahd_inb_scbram(ahd, SCB_BASE + i); 516 517 ahd_complete_scb(ahd, scb); 518 scbid = next_scbid; 519 } 520 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL); 521 522 scbid = ahd_inw(ahd, COMPLETE_SCB_HEAD); 523 while (!SCBID_IS_NULL(scbid)) { 524 525 ahd_set_scbptr(ahd, scbid); 526 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 527 scb = ahd_lookup_scb(ahd, scbid); 528 if (scb == NULL) { 529 printf("%s: Warning - Complete SCB %d invalid\n", 530 ahd_name(ahd), scbid); 531 continue; 532 } 533 534 ahd_complete_scb(ahd, scb); 535 scbid = next_scbid; 536 } 537 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL); 538 539 /* 540 * Restore state. 541 */ 542 ahd_set_scbptr(ahd, saved_scbptr); 543 ahd_restore_modes(ahd, saved_modes); 544 ahd->flags |= AHD_UPDATE_PEND_CMDS; 545 } 546 547 /* 548 * Determine if an SCB for a packetized transaction 549 * is active in a FIFO. 550 */ 551 static int 552 ahd_scb_active_in_fifo(struct ahd_softc *ahd, struct scb *scb) 553 { 554 555 /* 556 * The FIFO is only active for our transaction if 557 * the SCBPTR matches the SCB's ID and the firmware 558 * has installed a handler for the FIFO or we have 559 * a pending SAVEPTRS or CFG4DATA interrupt. 560 */ 561 if (ahd_get_scbptr(ahd) != SCB_GET_TAG(scb) 562 || ((ahd_inb(ahd, LONGJMP_ADDR+1) & INVALID_ADDR) != 0 563 && (ahd_inb(ahd, SEQINTSRC) & (CFG4DATA|SAVEPTRS)) == 0)) 564 return (0); 565 566 return (1); 567 } 568 569 /* 570 * Run a data fifo to completion for a transaction we know 571 * has completed across the SCSI bus (good status has been 572 * received). We are already set to the correct FIFO mode 573 * on entry to this routine. 574 * 575 * This function attempts to operate exactly as the firmware 576 * would when running this FIFO. Care must be taken to update 577 * this routine any time the firmware's FIFO algorithm is 578 * changed. 579 */ 580 static void 581 ahd_run_data_fifo(struct ahd_softc *ahd, struct scb *scb) 582 { 583 u_int seqintsrc; 584 585 while (1) { 586 seqintsrc = ahd_inb(ahd, SEQINTSRC); 587 if ((seqintsrc & CFG4DATA) != 0) { 588 uint32_t datacnt; 589 uint32_t sgptr; 590 591 /* 592 * Clear full residual flag. 593 */ 594 sgptr = ahd_inl_scbram(ahd, SCB_SGPTR) & ~SG_FULL_RESID; 595 ahd_outb(ahd, SCB_SGPTR, sgptr); 596 597 /* 598 * Load datacnt and address. 599 */ 600 datacnt = ahd_inl_scbram(ahd, SCB_DATACNT); 601 if ((datacnt & AHD_DMA_LAST_SEG) != 0) { 602 sgptr |= LAST_SEG; 603 ahd_outb(ahd, SG_STATE, 0); 604 } else 605 ahd_outb(ahd, SG_STATE, LOADING_NEEDED); 606 ahd_outq(ahd, HADDR, ahd_inq_scbram(ahd, SCB_DATAPTR)); 607 ahd_outl(ahd, HCNT, datacnt & AHD_SG_LEN_MASK); 608 ahd_outb(ahd, SG_CACHE_PRE, sgptr); 609 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN); 610 611 /* 612 * Initialize Residual Fields. 613 */ 614 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, datacnt >> 24); 615 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr & SG_PTR_MASK); 616 617 /* 618 * Mark the SCB as having a FIFO in use. 619 */ 620 ahd_outb(ahd, SCB_FIFO_USE_COUNT, 621 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) + 1); 622 623 /* 624 * Install a "fake" handler for this FIFO. 625 */ 626 ahd_outw(ahd, LONGJMP_ADDR, 0); 627 628 /* 629 * Notify the hardware that we have satisfied 630 * this sequencer interrupt. 631 */ 632 ahd_outb(ahd, CLRSEQINTSRC, CLRCFG4DATA); 633 } else if ((seqintsrc & SAVEPTRS) != 0) { 634 uint32_t sgptr; 635 uint32_t resid; 636 637 if ((ahd_inb(ahd, LONGJMP_ADDR+1)&INVALID_ADDR) != 0) { 638 /* 639 * Snapshot Save Pointers. Clear 640 * the snapshot and continue. 641 */ 642 ahd_outb(ahd, DFFSXFRCTL, CLRCHN); 643 continue; 644 } 645 646 /* 647 * Disable S/G fetch so the DMA engine 648 * is available to future users. 649 */ 650 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) 651 ahd_outb(ahd, CCSGCTL, 0); 652 ahd_outb(ahd, SG_STATE, 0); 653 654 /* 655 * Flush the data FIFO. Strickly only 656 * necessary for Rev A parts. 657 */ 658 ahd_outb(ahd, DFCNTRL, 659 ahd_inb(ahd, DFCNTRL) | FIFOFLUSH); 660 661 /* 662 * Calculate residual. 663 */ 664 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 665 resid = ahd_inl(ahd, SHCNT); 666 resid |= 667 ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT+3) << 24; 668 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, resid); 669 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG) == 0) { 670 /* 671 * Must back up to the correct S/G element. 672 * Typically this just means resetting our 673 * low byte to the offset in the SG_CACHE, 674 * but if we wrapped, we have to correct 675 * the other bytes of the sgptr too. 676 */ 677 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & 0x80) != 0 678 && (sgptr & 0x80) == 0) 679 sgptr -= 0x100; 680 sgptr &= ~0xFF; 681 sgptr |= ahd_inb(ahd, SG_CACHE_SHADOW) 682 & SG_ADDR_MASK; 683 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 684 ahd_outb(ahd, SCB_RESIDUAL_DATACNT + 3, 0); 685 } else if ((resid & AHD_SG_LEN_MASK) == 0) { 686 ahd_outb(ahd, SCB_RESIDUAL_SGPTR, 687 sgptr | SG_LIST_NULL); 688 } 689 /* 690 * Save Pointers. 691 */ 692 ahd_outq(ahd, SCB_DATAPTR, ahd_inq(ahd, SHADDR)); 693 ahd_outl(ahd, SCB_DATACNT, resid); 694 ahd_outl(ahd, SCB_SGPTR, sgptr); 695 ahd_outb(ahd, CLRSEQINTSRC, CLRSAVEPTRS); 696 ahd_outb(ahd, SEQIMODE, 697 ahd_inb(ahd, SEQIMODE) | ENSAVEPTRS); 698 /* 699 * If the data is to the SCSI bus, we are 700 * done, otherwise wait for FIFOEMP. 701 */ 702 if ((ahd_inb(ahd, DFCNTRL) & DIRECTION) != 0) 703 break; 704 } else if ((ahd_inb(ahd, SG_STATE) & LOADING_NEEDED) != 0) { 705 uint32_t sgptr; 706 uint64_t data_addr; 707 uint32_t data_len; 708 u_int dfcntrl; 709 710 /* 711 * Disable S/G fetch so the DMA engine 712 * is available to future users. 713 */ 714 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) { 715 ahd_outb(ahd, CCSGCTL, 0); 716 ahd_outb(ahd, SG_STATE, LOADING_NEEDED); 717 } 718 719 /* 720 * Wait for the DMA engine to notice that the 721 * host transfer is enabled and that there is 722 * space in the S/G FIFO for new segments before 723 * loading more segments. 724 */ 725 if ((ahd_inb(ahd, DFSTATUS) & PRELOAD_AVAIL) == 0) 726 continue; 727 if ((ahd_inb(ahd, DFCNTRL) & HDMAENACK) == 0) 728 continue; 729 730 /* 731 * Determine the offset of the next S/G 732 * element to load. 733 */ 734 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 735 sgptr &= SG_PTR_MASK; 736 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 737 struct ahd_dma64_seg *sg; 738 739 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 740 data_addr = sg->addr; 741 data_len = sg->len; 742 sgptr += sizeof(*sg); 743 } else { 744 struct ahd_dma_seg *sg; 745 746 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 747 data_addr = sg->len & AHD_SG_HIGH_ADDR_MASK; 748 data_addr <<= 8; 749 data_addr |= sg->addr; 750 data_len = sg->len; 751 sgptr += sizeof(*sg); 752 } 753 754 /* 755 * Update residual information. 756 */ 757 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, data_len >> 24); 758 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 759 760 /* 761 * Load the S/G. 762 */ 763 if (data_len & AHD_DMA_LAST_SEG) { 764 sgptr |= LAST_SEG; 765 ahd_outb(ahd, SG_STATE, 0); 766 } 767 ahd_outq(ahd, HADDR, data_addr); 768 ahd_outl(ahd, HCNT, data_len & AHD_SG_LEN_MASK); 769 ahd_outb(ahd, SG_CACHE_PRE, sgptr & 0xFF); 770 771 /* 772 * Advertise the segment to the hardware. 773 */ 774 dfcntrl = ahd_inb(ahd, DFCNTRL)|PRELOADEN|HDMAEN; 775 if ((ahd->features & AHD_NEW_DFCNTRL_OPTS)!=0) { 776 /* 777 * Use SCSIENWRDIS so that SCSIEN 778 * is never modified by this 779 * operation. 780 */ 781 dfcntrl |= SCSIENWRDIS; 782 } 783 ahd_outb(ahd, DFCNTRL, dfcntrl); 784 } else if ((ahd_inb(ahd, SG_CACHE_SHADOW) 785 & LAST_SEG_DONE) != 0) { 786 787 /* 788 * Transfer completed to the end of SG list 789 * and has flushed to the host. 790 */ 791 ahd_outb(ahd, SCB_SGPTR, 792 ahd_inb_scbram(ahd, SCB_SGPTR) | SG_LIST_NULL); 793 break; 794 } else if ((ahd_inb(ahd, DFSTATUS) & FIFOEMP) != 0) { 795 break; 796 } 797 ahd_delay(200); 798 } 799 /* 800 * Clear any handler for this FIFO, decrement 801 * the FIFO use count for the SCB, and release 802 * the FIFO. 803 */ 804 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 805 ahd_outb(ahd, SCB_FIFO_USE_COUNT, 806 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) - 1); 807 ahd_outb(ahd, DFFSXFRCTL, CLRCHN); 808 } 809 810 void 811 ahd_run_qoutfifo(struct ahd_softc *ahd) 812 { 813 struct scb *scb; 814 u_int scb_index; 815 816 if ((ahd->flags & AHD_RUNNING_QOUTFIFO) != 0) 817 panic("ahd_run_qoutfifo recursion"); 818 ahd->flags |= AHD_RUNNING_QOUTFIFO; 819 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_POSTREAD); 820 while ((ahd->qoutfifo[ahd->qoutfifonext] 821 & QOUTFIFO_ENTRY_VALID_LE) == ahd->qoutfifonext_valid_tag) { 822 823 scb_index = ahd_le16toh(ahd->qoutfifo[ahd->qoutfifonext] 824 & ~QOUTFIFO_ENTRY_VALID_LE); 825 scb = ahd_lookup_scb(ahd, scb_index); 826 if (scb == NULL) { 827 printf("%s: WARNING no command for scb %d " 828 "(cmdcmplt)\nQOUTPOS = %d\n", 829 ahd_name(ahd), scb_index, 830 ahd->qoutfifonext); 831 ahd_dump_card_state(ahd); 832 } else 833 ahd_complete_scb(ahd, scb); 834 835 ahd->qoutfifonext = (ahd->qoutfifonext+1) & (AHD_QOUT_SIZE-1); 836 if (ahd->qoutfifonext == 0) 837 ahd->qoutfifonext_valid_tag ^= QOUTFIFO_ENTRY_VALID_LE; 838 } 839 ahd->flags &= ~AHD_RUNNING_QOUTFIFO; 840 } 841 842 /************************* Interrupt Handling *********************************/ 843 void 844 ahd_handle_hwerrint(struct ahd_softc *ahd) 845 { 846 /* 847 * Some catastrophic hardware error has occurred. 848 * Print it for the user and disable the controller. 849 */ 850 int i; 851 int error; 852 853 error = ahd_inb(ahd, ERROR); 854 for (i = 0; i < num_errors; i++) { 855 if ((error & ahd_hard_errors[i].errno) != 0) 856 printf("%s: hwerrint, %s\n", 857 ahd_name(ahd), ahd_hard_errors[i].errmesg); 858 } 859 860 ahd_dump_card_state(ahd); 861 panic("BRKADRINT"); 862 863 /* Tell everyone that this HBA is no longer available */ 864 ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS, 865 CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN, 866 CAM_NO_HBA); 867 868 /* Tell the system that this controller has gone away. */ 869 ahd_free(ahd); 870 } 871 872 void 873 ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat) 874 { 875 u_int seqintcode; 876 877 /* 878 * Save the sequencer interrupt code and clear the SEQINT 879 * bit. We will unpause the sequencer, if appropriate, 880 * after servicing the request. 881 */ 882 seqintcode = ahd_inb(ahd, SEQINTCODE); 883 ahd_outb(ahd, CLRINT, CLRSEQINT); 884 if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) { 885 /* 886 * Unpause the sequencer and let it clear 887 * SEQINT by writing NO_SEQINT to it. This 888 * will cause the sequencer to be paused again, 889 * which is the expected state of this routine. 890 */ 891 ahd_unpause(ahd); 892 while (!ahd_is_paused(ahd)) 893 ; 894 ahd_outb(ahd, CLRINT, CLRSEQINT); 895 } 896 ahd_update_modes(ahd); 897 #ifdef AHD_DEBUG 898 if ((ahd_debug & AHD_SHOW_MISC) != 0) 899 printf("%s: Handle Seqint Called for code %d\n", 900 ahd_name(ahd), seqintcode); 901 #endif 902 switch (seqintcode) { 903 case BAD_SCB_STATUS: 904 { 905 struct scb *scb; 906 u_int scbid; 907 int cmds_pending; 908 909 scbid = ahd_get_scbptr(ahd); 910 scb = ahd_lookup_scb(ahd, scbid); 911 if (scb != NULL) { 912 ahd_complete_scb(ahd, scb); 913 } else { 914 printf("%s: WARNING no command for scb %d " 915 "(bad status)\n", ahd_name(ahd), scbid); 916 ahd_dump_card_state(ahd); 917 } 918 cmds_pending = ahd_inw(ahd, CMDS_PENDING); 919 if (cmds_pending > 0) 920 ahd_outw(ahd, CMDS_PENDING, cmds_pending - 1); 921 break; 922 } 923 case ENTERING_NONPACK: 924 { 925 struct scb *scb; 926 u_int scbid; 927 928 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 929 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 930 scbid = ahd_get_scbptr(ahd); 931 scb = ahd_lookup_scb(ahd, scbid); 932 if (scb == NULL) { 933 /* 934 * Somehow need to know if this 935 * is from a selection or reselection. 936 * From that, we can determine target 937 * ID so we at least have an I_T nexus. 938 */ 939 } else { 940 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid); 941 ahd_outb(ahd, SAVED_LUN, scb->hscb->lun); 942 ahd_outb(ahd, SEQ_FLAGS, 0x0); 943 } 944 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0 945 && (ahd_inb(ahd, SCSISIGO) & ATNO) != 0) { 946 /* 947 * Phase change after read stream with 948 * CRC error with P0 asserted on last 949 * packet. 950 */ 951 #ifdef AHD_DEBUG 952 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) 953 printf("%s: Assuming LQIPHASE_NLQ with " 954 "P0 assertion\n", ahd_name(ahd)); 955 #endif 956 } 957 #ifdef AHD_DEBUG 958 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) 959 printf("%s: Entering NONPACK\n", ahd_name(ahd)); 960 #endif 961 break; 962 } 963 case INVALID_SEQINT: 964 printf("%s: Invalid Sequencer interrupt occurred.\n", 965 ahd_name(ahd)); 966 ahd_dump_card_state(ahd); 967 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 968 break; 969 case STATUS_OVERRUN: 970 { 971 struct scb *scb; 972 u_int scbid; 973 974 scbid = ahd_get_scbptr(ahd); 975 scb = ahd_lookup_scb(ahd, scbid); 976 if (scb != NULL) 977 ahd_print_path(ahd, scb); 978 else 979 printf("%s: ", ahd_name(ahd)); 980 printf("SCB %d Packetized Status Overrun", scbid); 981 ahd_dump_card_state(ahd); 982 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 983 break; 984 } 985 case CFG4ISTAT_INTR: 986 { 987 struct scb *scb; 988 u_int scbid; 989 990 scbid = ahd_get_scbptr(ahd); 991 scb = ahd_lookup_scb(ahd, scbid); 992 if (scb == NULL) { 993 ahd_dump_card_state(ahd); 994 printf("CFG4ISTAT: Free SCB %d referenced", scbid); 995 panic("For safety"); 996 } 997 ahd_outq(ahd, HADDR, scb->sense_busaddr); 998 ahd_outw(ahd, HCNT, AHD_SENSE_BUFSIZE); 999 ahd_outb(ahd, HCNT + 2, 0); 1000 ahd_outb(ahd, SG_CACHE_PRE, SG_LAST_SEG); 1001 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN); 1002 break; 1003 } 1004 case ILLEGAL_PHASE: 1005 { 1006 u_int bus_phase; 1007 1008 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1009 printf("%s: ILLEGAL_PHASE 0x%x\n", 1010 ahd_name(ahd), bus_phase); 1011 1012 switch (bus_phase) { 1013 case P_DATAOUT: 1014 case P_DATAIN: 1015 case P_DATAOUT_DT: 1016 case P_DATAIN_DT: 1017 case P_MESGOUT: 1018 case P_STATUS: 1019 case P_MESGIN: 1020 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1021 printf("%s: Issued Bus Reset.\n", ahd_name(ahd)); 1022 break; 1023 case P_COMMAND: 1024 { 1025 struct ahd_devinfo devinfo; 1026 struct scb *scb; 1027 struct ahd_initiator_tinfo *targ_info; 1028 struct ahd_tmode_tstate *tstate; 1029 struct ahd_transinfo *tinfo; 1030 u_int scbid; 1031 1032 /* 1033 * If a target takes us into the command phase 1034 * assume that it has been externally reset and 1035 * has thus lost our previous packetized negotiation 1036 * agreement. Since we have not sent an identify 1037 * message and may not have fully qualified the 1038 * connection, we change our command to TUR, assert 1039 * ATN and ABORT the task when we go to message in 1040 * phase. The OSM will see the REQUEUE_REQUEST 1041 * status and retry the command. 1042 */ 1043 scbid = ahd_get_scbptr(ahd); 1044 scb = ahd_lookup_scb(ahd, scbid); 1045 if (scb == NULL) { 1046 printf("Invalid phase with no valid SCB. " 1047 "Resetting bus.\n"); 1048 ahd_reset_channel(ahd, 'A', 1049 /*Initiate Reset*/TRUE); 1050 break; 1051 } 1052 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb), 1053 SCB_GET_TARGET(ahd, scb), 1054 SCB_GET_LUN(scb), 1055 SCB_GET_CHANNEL(ahd, scb), 1056 ROLE_INITIATOR); 1057 targ_info = ahd_fetch_transinfo(ahd, 1058 devinfo.channel, 1059 devinfo.our_scsiid, 1060 devinfo.target, 1061 &tstate); 1062 tinfo = &targ_info->curr; 1063 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 1064 AHD_TRANS_ACTIVE, /*paused*/TRUE); 1065 ahd_set_syncrate(ahd, &devinfo, /*period*/0, 1066 /*offset*/0, /*ppr_options*/0, 1067 AHD_TRANS_ACTIVE, /*paused*/TRUE); 1068 ahd_outb(ahd, SCB_CDB_STORE, 0); 1069 ahd_outb(ahd, SCB_CDB_STORE+1, 0); 1070 ahd_outb(ahd, SCB_CDB_STORE+2, 0); 1071 ahd_outb(ahd, SCB_CDB_STORE+3, 0); 1072 ahd_outb(ahd, SCB_CDB_STORE+4, 0); 1073 ahd_outb(ahd, SCB_CDB_STORE+5, 0); 1074 ahd_outb(ahd, SCB_CDB_LEN, 6); 1075 scb->hscb->control &= ~(TAG_ENB|SCB_TAG_TYPE); 1076 scb->hscb->control |= MK_MESSAGE; 1077 ahd_outb(ahd, SCB_CONTROL, scb->hscb->control); 1078 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1079 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid); 1080 /* 1081 * The lun is 0, regardless of the SCB's lun 1082 * as we have not sent an identify message. 1083 */ 1084 ahd_outb(ahd, SAVED_LUN, 0); 1085 ahd_outb(ahd, SEQ_FLAGS, 0); 1086 ahd_assert_atn(ahd); 1087 scb->flags &= ~(SCB_PACKETIZED); 1088 scb->flags |= SCB_ABORT|SCB_CMDPHASE_ABORT; 1089 ahd_freeze_devq(ahd, scb); 1090 ahd_set_transaction_status(scb, CAM_REQUEUE_REQ); 1091 ahd_freeze_scb(scb); 1092 1093 /* 1094 * Allow the sequencer to continue with 1095 * non-pack processing. 1096 */ 1097 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1098 ahd_outb(ahd, CLRLQOINT1, CLRLQOPHACHGINPKT); 1099 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) { 1100 ahd_outb(ahd, CLRLQOINT1, 0); 1101 } 1102 #ifdef AHD_DEBUG 1103 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1104 ahd_print_path(ahd, scb); 1105 printf("Unexpected command phase from " 1106 "packetized target\n"); 1107 } 1108 #endif 1109 break; 1110 } 1111 } 1112 break; 1113 } 1114 case CFG4OVERRUN: 1115 { 1116 struct scb *scb; 1117 u_int scb_index; 1118 1119 #ifdef AHD_DEBUG 1120 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1121 printf("%s: CFG4OVERRUN mode = %x\n", ahd_name(ahd), 1122 ahd_inb(ahd, MODE_PTR)); 1123 } 1124 #endif 1125 scb_index = ahd_get_scbptr(ahd); 1126 scb = ahd_lookup_scb(ahd, scb_index); 1127 if (scb == NULL) { 1128 /* 1129 * Attempt to transfer to an SCB that is 1130 * not outstanding. 1131 */ 1132 ahd_assert_atn(ahd); 1133 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1134 ahd->msgout_buf[0] = MSG_ABORT_TASK; 1135 ahd->msgout_len = 1; 1136 ahd->msgout_index = 0; 1137 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 1138 /* 1139 * Clear status received flag to prevent any 1140 * attempt to complete this bogus SCB. 1141 */ 1142 ahd_outb(ahd, SCB_CONTROL, 1143 ahd_inb_scbram(ahd, SCB_CONTROL) 1144 & ~STATUS_RCVD); 1145 } 1146 break; 1147 } 1148 case DUMP_CARD_STATE: 1149 { 1150 ahd_dump_card_state(ahd); 1151 break; 1152 } 1153 case PDATA_REINIT: 1154 { 1155 #ifdef AHD_DEBUG 1156 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1157 printf("%s: PDATA_REINIT - DFCNTRL = 0x%x " 1158 "SG_CACHE_SHADOW = 0x%x\n", 1159 ahd_name(ahd), ahd_inb(ahd, DFCNTRL), 1160 ahd_inb(ahd, SG_CACHE_SHADOW)); 1161 } 1162 #endif 1163 ahd_reinitialize_dataptrs(ahd); 1164 break; 1165 } 1166 case HOST_MSG_LOOP: 1167 { 1168 struct ahd_devinfo devinfo; 1169 1170 /* 1171 * The sequencer has encountered a message phase 1172 * that requires host assistance for completion. 1173 * While handling the message phase(s), we will be 1174 * notified by the sequencer after each byte is 1175 * transferred so we can track bus phase changes. 1176 * 1177 * If this is the first time we've seen a HOST_MSG_LOOP 1178 * interrupt, initialize the state of the host message 1179 * loop. 1180 */ 1181 ahd_fetch_devinfo(ahd, &devinfo); 1182 if (ahd->msg_type == MSG_TYPE_NONE) { 1183 struct scb *scb; 1184 u_int scb_index; 1185 u_int bus_phase; 1186 1187 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1188 if (bus_phase != P_MESGIN 1189 && bus_phase != P_MESGOUT) { 1190 printf("ahd_intr: HOST_MSG_LOOP bad " 1191 "phase 0x%x\n", bus_phase); 1192 /* 1193 * Probably transitioned to bus free before 1194 * we got here. Just punt the message. 1195 */ 1196 ahd_dump_card_state(ahd); 1197 ahd_clear_intstat(ahd); 1198 ahd_restart(ahd); 1199 return; 1200 } 1201 1202 scb_index = ahd_get_scbptr(ahd); 1203 scb = ahd_lookup_scb(ahd, scb_index); 1204 if (devinfo.role == ROLE_INITIATOR) { 1205 if (bus_phase == P_MESGOUT) 1206 ahd_setup_initiator_msgout(ahd, 1207 &devinfo, 1208 scb); 1209 else { 1210 ahd->msg_type = 1211 MSG_TYPE_INITIATOR_MSGIN; 1212 ahd->msgin_index = 0; 1213 } 1214 } 1215 #if AHD_TARGET_MODE 1216 else { 1217 if (bus_phase == P_MESGOUT) { 1218 ahd->msg_type = 1219 MSG_TYPE_TARGET_MSGOUT; 1220 ahd->msgin_index = 0; 1221 } 1222 else 1223 ahd_setup_target_msgin(ahd, 1224 &devinfo, 1225 scb); 1226 } 1227 #endif 1228 } 1229 1230 ahd_handle_message_phase(ahd); 1231 break; 1232 } 1233 case NO_MATCH: 1234 { 1235 /* Ensure we don't leave the selection hardware on */ 1236 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 1237 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 1238 1239 printf("%s:%c:%d: no active SCB for reconnecting " 1240 "target - issuing BUS DEVICE RESET\n", 1241 ahd_name(ahd), 'A', ahd_inb(ahd, SELID) >> 4); 1242 printf("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, " 1243 "REG0 == 0x%x ACCUM = 0x%x\n", 1244 ahd_inb(ahd, SAVED_SCSIID), ahd_inb(ahd, SAVED_LUN), 1245 ahd_inw(ahd, REG0), ahd_inb(ahd, ACCUM)); 1246 printf("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, " 1247 "SINDEX == 0x%x\n", 1248 ahd_inb(ahd, SEQ_FLAGS), ahd_get_scbptr(ahd), 1249 ahd_find_busy_tcl(ahd, 1250 BUILD_TCL(ahd_inb(ahd, SAVED_SCSIID), 1251 ahd_inb(ahd, SAVED_LUN))), 1252 ahd_inw(ahd, SINDEX)); 1253 printf("SELID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, " 1254 "SCB_CONTROL == 0x%x\n", 1255 ahd_inb(ahd, SELID), ahd_inb_scbram(ahd, SCB_SCSIID), 1256 ahd_inb_scbram(ahd, SCB_LUN), 1257 ahd_inb_scbram(ahd, SCB_CONTROL)); 1258 printf("SCSIBUS[0] == 0x%x, SCSISIGI == 0x%x\n", 1259 ahd_inb(ahd, SCSIBUS), ahd_inb(ahd, SCSISIGI)); 1260 printf("SXFRCTL0 == 0x%x\n", ahd_inb(ahd, SXFRCTL0)); 1261 printf("SEQCTL0 == 0x%x\n", ahd_inb(ahd, SEQCTL0)); 1262 ahd_dump_card_state(ahd); 1263 ahd->msgout_buf[0] = MSG_BUS_DEV_RESET; 1264 ahd->msgout_len = 1; 1265 ahd->msgout_index = 0; 1266 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 1267 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1268 ahd_assert_atn(ahd); 1269 break; 1270 } 1271 case PROTO_VIOLATION: 1272 { 1273 ahd_handle_proto_violation(ahd); 1274 break; 1275 } 1276 case IGN_WIDE_RES: 1277 { 1278 struct ahd_devinfo devinfo; 1279 1280 ahd_fetch_devinfo(ahd, &devinfo); 1281 ahd_handle_ign_wide_residue(ahd, &devinfo); 1282 break; 1283 } 1284 case BAD_PHASE: 1285 { 1286 u_int lastphase; 1287 1288 lastphase = ahd_inb(ahd, LASTPHASE); 1289 printf("%s:%c:%d: unknown scsi bus phase %x, " 1290 "lastphase = 0x%x. Attempting to continue\n", 1291 ahd_name(ahd), 'A', 1292 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)), 1293 lastphase, ahd_inb(ahd, SCSISIGI)); 1294 break; 1295 } 1296 case MISSED_BUSFREE: 1297 { 1298 u_int lastphase; 1299 1300 lastphase = ahd_inb(ahd, LASTPHASE); 1301 printf("%s:%c:%d: Missed busfree. " 1302 "Lastphase = 0x%x, Curphase = 0x%x\n", 1303 ahd_name(ahd), 'A', 1304 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)), 1305 lastphase, ahd_inb(ahd, SCSISIGI)); 1306 ahd_restart(ahd); 1307 return; 1308 } 1309 case DATA_OVERRUN: 1310 { 1311 /* 1312 * When the sequencer detects an overrun, it 1313 * places the controller in "BITBUCKET" mode 1314 * and allows the target to complete its transfer. 1315 * Unfortunately, none of the counters get updated 1316 * when the controller is in this mode, so we have 1317 * no way of knowing how large the overrun was. 1318 */ 1319 struct scb *scb; 1320 u_int scbindex; 1321 #ifdef AHD_DEBUG 1322 u_int lastphase; 1323 #endif 1324 1325 scbindex = ahd_get_scbptr(ahd); 1326 scb = ahd_lookup_scb(ahd, scbindex); 1327 #ifdef AHD_DEBUG 1328 lastphase = ahd_inb(ahd, LASTPHASE); 1329 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1330 ahd_print_path(ahd, scb); 1331 printf("data overrun detected %s. Tag == 0x%x.\n", 1332 ahd_lookup_phase_entry(lastphase)->phasemsg, 1333 SCB_GET_TAG(scb)); 1334 ahd_print_path(ahd, scb); 1335 printf("%s seen Data Phase. Length = %ld. " 1336 "NumSGs = %d.\n", 1337 ahd_inb(ahd, SEQ_FLAGS) & DPHASE 1338 ? "Have" : "Haven't", 1339 ahd_get_transfer_length(scb), scb->sg_count); 1340 ahd_dump_sglist(scb); 1341 } 1342 #endif 1343 1344 /* 1345 * Set this and it will take effect when the 1346 * target does a command complete. 1347 */ 1348 ahd_freeze_devq(ahd, scb); 1349 ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR); 1350 ahd_freeze_scb(scb); 1351 break; 1352 } 1353 case MKMSG_FAILED: 1354 { 1355 struct ahd_devinfo devinfo; 1356 struct scb *scb; 1357 u_int scbid; 1358 1359 ahd_fetch_devinfo(ahd, &devinfo); 1360 printf("%s:%c:%d:%d: Attempt to issue message failed\n", 1361 ahd_name(ahd), devinfo.channel, devinfo.target, 1362 devinfo.lun); 1363 scbid = ahd_get_scbptr(ahd); 1364 scb = ahd_lookup_scb(ahd, scbid); 1365 if (scb != NULL 1366 && (scb->flags & SCB_RECOVERY_SCB) != 0) 1367 /* 1368 * Ensure that we didn't put a second instance of this 1369 * SCB into the QINFIFO. 1370 */ 1371 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 1372 SCB_GET_CHANNEL(ahd, scb), 1373 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 1374 ROLE_INITIATOR, /*status*/0, 1375 SEARCH_REMOVE); 1376 ahd_outb(ahd, SCB_CONTROL, 1377 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE); 1378 break; 1379 } 1380 case TASKMGMT_FUNC_COMPLETE: 1381 { 1382 u_int scbid; 1383 struct scb *scb; 1384 1385 scbid = ahd_get_scbptr(ahd); 1386 scb = ahd_lookup_scb(ahd, scbid); 1387 if (scb != NULL) { 1388 u_int lun; 1389 u_int tag; 1390 cam_status error; 1391 1392 ahd_print_path(ahd, scb); 1393 printf("Task Management Func 0x%x Complete\n", 1394 scb->hscb->task_management); 1395 lun = CAM_LUN_WILDCARD; 1396 tag = SCB_LIST_NULL; 1397 1398 switch (scb->hscb->task_management) { 1399 case SIU_TASKMGMT_ABORT_TASK: 1400 tag = SCB_GET_TAG(scb); 1401 case SIU_TASKMGMT_ABORT_TASK_SET: 1402 case SIU_TASKMGMT_CLEAR_TASK_SET: 1403 lun = scb->hscb->lun; 1404 error = CAM_REQ_ABORTED; 1405 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 1406 'A', lun, tag, ROLE_INITIATOR, 1407 error); 1408 break; 1409 case SIU_TASKMGMT_LUN_RESET: 1410 lun = scb->hscb->lun; 1411 case SIU_TASKMGMT_TARGET_RESET: 1412 { 1413 struct ahd_devinfo devinfo; 1414 1415 ahd_scb_devinfo(ahd, &devinfo, scb); 1416 error = CAM_BDR_SENT; 1417 ahd_handle_devreset(ahd, &devinfo, lun, 1418 CAM_BDR_SENT, 1419 lun != CAM_LUN_WILDCARD 1420 ? "Lun Reset" 1421 : "Target Reset", 1422 /*verbose_level*/0); 1423 break; 1424 } 1425 default: 1426 panic("Unexpected TaskMgmt Func\n"); 1427 break; 1428 } 1429 } 1430 break; 1431 } 1432 case TASKMGMT_CMD_CMPLT_OKAY: 1433 { 1434 u_int scbid; 1435 struct scb *scb; 1436 1437 /* 1438 * An ABORT TASK TMF failed to be delivered before 1439 * the targeted command completed normally. 1440 */ 1441 scbid = ahd_get_scbptr(ahd); 1442 scb = ahd_lookup_scb(ahd, scbid); 1443 if (scb != NULL) { 1444 /* 1445 * Remove the second instance of this SCB from 1446 * the QINFIFO if it is still there. 1447 */ 1448 ahd_print_path(ahd, scb); 1449 printf("SCB completes before TMF\n"); 1450 /* 1451 * Handle losing the race. Wait until any 1452 * current selection completes. We will then 1453 * set the TMF back to zero in this SCB so that 1454 * the sequencer doesn't bother to issue another 1455 * sequencer interrupt for its completion. 1456 */ 1457 while ((ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0 1458 && (ahd_inb(ahd, SSTAT0) & SELDO) == 0 1459 && (ahd_inb(ahd, SSTAT1) & SELTO) == 0) 1460 ; 1461 ahd_outb(ahd, SCB_TASK_MANAGEMENT, 0); 1462 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 1463 SCB_GET_CHANNEL(ahd, scb), 1464 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 1465 ROLE_INITIATOR, /*status*/0, 1466 SEARCH_REMOVE); 1467 } 1468 break; 1469 } 1470 case TRACEPOINT0: 1471 case TRACEPOINT1: 1472 case TRACEPOINT2: 1473 case TRACEPOINT3: 1474 printf("%s: Tracepoint %d\n", ahd_name(ahd), 1475 seqintcode - TRACEPOINT0); 1476 break; 1477 case NO_SEQINT: 1478 break; 1479 case SAW_HWERR: 1480 ahd_handle_hwerrint(ahd); 1481 break; 1482 default: 1483 printf("%s: Unexpected SEQINTCODE %d\n", ahd_name(ahd), 1484 seqintcode); 1485 break; 1486 } 1487 /* 1488 * The sequencer is paused immediately on 1489 * a SEQINT, so we should restart it when 1490 * we're done. 1491 */ 1492 ahd_unpause(ahd); 1493 } 1494 1495 void 1496 ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) 1497 { 1498 struct scb *scb; 1499 u_int status0; 1500 u_int status3; 1501 u_int status; 1502 u_int lqistat1; 1503 u_int lqostat0; 1504 u_int scbid; 1505 u_int busfreetime; 1506 1507 ahd_update_modes(ahd); 1508 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1509 1510 status3 = ahd_inb(ahd, SSTAT3) & (NTRAMPERR|OSRAMPERR); 1511 status0 = ahd_inb(ahd, SSTAT0) & (IOERR|OVERRUN|SELDI|SELDO); 1512 status = ahd_inb(ahd, SSTAT1) & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR); 1513 lqistat1 = ahd_inb(ahd, LQISTAT1); 1514 lqostat0 = ahd_inb(ahd, LQOSTAT0); 1515 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME; 1516 if ((status0 & (SELDI|SELDO)) != 0) { 1517 u_int simode0; 1518 1519 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 1520 simode0 = ahd_inb(ahd, SIMODE0); 1521 status0 &= simode0 & (IOERR|OVERRUN|SELDI|SELDO); 1522 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1523 } 1524 scbid = ahd_get_scbptr(ahd); 1525 scb = ahd_lookup_scb(ahd, scbid); 1526 if (scb != NULL 1527 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0) 1528 scb = NULL; 1529 1530 /* Make sure the sequencer is in a safe location. */ 1531 ahd_clear_critical_section(ahd); 1532 1533 if ((status0 & IOERR) != 0) { 1534 u_int now_lvd; 1535 1536 now_lvd = ahd_inb(ahd, SBLKCTL) & ENAB40; 1537 printf("%s: Transceiver State Has Changed to %s mode\n", 1538 ahd_name(ahd), now_lvd ? "LVD" : "SE"); 1539 ahd_outb(ahd, CLRSINT0, CLRIOERR); 1540 /* 1541 * A change in I/O mode is equivalent to a bus reset. 1542 */ 1543 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1544 ahd_pause(ahd); 1545 ahd_setup_iocell_workaround(ahd); 1546 ahd_unpause(ahd); 1547 } else if ((status0 & OVERRUN) != 0) { 1548 printf("%s: SCSI offset overrun detected. Resetting bus.\n", 1549 ahd_name(ahd)); 1550 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1551 } else if ((status & SCSIRSTI) != 0) { 1552 printf("%s: Someone reset channel A\n", ahd_name(ahd)); 1553 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/FALSE); 1554 } else if ((status & SCSIPERR) != 0) { 1555 ahd_handle_transmission_error(ahd); 1556 } else if (lqostat0 != 0) { 1557 printf("%s: lqostat0 == 0x%x!\n", ahd_name(ahd), lqostat0); 1558 ahd_outb(ahd, CLRLQOINT0, lqostat0); 1559 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) { 1560 ahd_outb(ahd, CLRLQOINT1, 0); 1561 } 1562 } else if ((status & SELTO) != 0) { 1563 u_int scbid; 1564 1565 /* Stop the selection */ 1566 ahd_outb(ahd, SCSISEQ0, 0); 1567 1568 /* No more pending messages */ 1569 ahd_clear_msg_state(ahd); 1570 1571 /* Clear interrupt state */ 1572 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR); 1573 1574 /* 1575 * Although the driver does not care about the 1576 * 'Selection in Progress' status bit, the busy 1577 * LED does. SELINGO is only cleared by a sucessfull 1578 * selection, so we must manually clear it to insure 1579 * the LED turns off just incase no future successful 1580 * selections occur (e.g. no devices on the bus). 1581 */ 1582 ahd_outb(ahd, CLRSINT0, CLRSELINGO); 1583 1584 scbid = ahd_inw(ahd, WAITING_TID_HEAD); 1585 scb = ahd_lookup_scb(ahd, scbid); 1586 if (scb == NULL) { 1587 printf("%s: ahd_intr - referenced scb not " 1588 "valid during SELTO scb(0x%x)\n", 1589 ahd_name(ahd), scbid); 1590 ahd_dump_card_state(ahd); 1591 } else { 1592 struct ahd_devinfo devinfo; 1593 #ifdef AHD_DEBUG 1594 if ((ahd_debug & AHD_SHOW_SELTO) != 0) { 1595 ahd_print_path(ahd, scb); 1596 printf("Saw Selection Timeout for SCB 0x%x\n", 1597 scbid); 1598 } 1599 #endif 1600 /* 1601 * Force a renegotiation with this target just in 1602 * case the cable was pulled and will later be 1603 * re-attached. The target may forget its negotiation 1604 * settings with us should it attempt to reselect 1605 * during the interruption. The target will not issue 1606 * a unit attention in this case, so we must always 1607 * renegotiate. 1608 */ 1609 ahd_scb_devinfo(ahd, &devinfo, scb); 1610 ahd_force_renegotiation(ahd, &devinfo); 1611 ahd_set_transaction_status(scb, CAM_SEL_TIMEOUT); 1612 ahd_freeze_devq(ahd, scb); 1613 } 1614 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1615 ahd_iocell_first_selection(ahd); 1616 ahd_unpause(ahd); 1617 } else if ((status0 & (SELDI|SELDO)) != 0) { 1618 ahd_iocell_first_selection(ahd); 1619 ahd_unpause(ahd); 1620 } else if (status3 != 0) { 1621 printf("%s: SCSI Cell parity error SSTAT3 == 0x%x\n", 1622 ahd_name(ahd), status3); 1623 ahd_outb(ahd, CLRSINT3, status3); 1624 } else if ((lqistat1 & (LQIPHASE_LQ|LQIPHASE_NLQ)) != 0) { 1625 ahd_handle_lqiphase_error(ahd, lqistat1); 1626 } else if ((lqistat1 & LQICRCI_NLQ) != 0) { 1627 /* 1628 * This status can be delayed during some 1629 * streaming operations. The SCSIPHASE 1630 * handler has already dealt with this case 1631 * so just clear the error. 1632 */ 1633 ahd_outb(ahd, CLRLQIINT1, CLRLQICRCI_NLQ); 1634 } else if ((status & BUSFREE) != 0) { 1635 u_int lqostat1; 1636 int restart; 1637 int clear_fifo; 1638 int packetized; 1639 u_int mode; 1640 1641 /* 1642 * Clear our selection hardware as soon as possible. 1643 * We may have an entry in the waiting Q for this target, 1644 * that is affected by this busfree and we don't want to 1645 * go about selecting the target while we handle the event. 1646 */ 1647 ahd_outb(ahd, SCSISEQ0, 0); 1648 1649 /* 1650 * Determine what we were up to at the time of 1651 * the busfree. 1652 */ 1653 mode = AHD_MODE_SCSI; 1654 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME; 1655 lqostat1 = ahd_inb(ahd, LQOSTAT1); 1656 switch (busfreetime) { 1657 case BUSFREE_DFF0: 1658 case BUSFREE_DFF1: 1659 { 1660 u_int scbid; 1661 struct scb *scb; 1662 1663 mode = busfreetime == BUSFREE_DFF0 1664 ? AHD_MODE_DFF0 : AHD_MODE_DFF1; 1665 ahd_set_modes(ahd, mode, mode); 1666 scbid = ahd_get_scbptr(ahd); 1667 scb = ahd_lookup_scb(ahd, scbid); 1668 if (scb == NULL) { 1669 printf("%s: Invalid SCB %d in DFF%d " 1670 "during unexpected busfree\n", 1671 ahd_name(ahd), scbid, mode); 1672 packetized = 0; 1673 } else 1674 packetized = (scb->flags & SCB_PACKETIZED) != 0; 1675 clear_fifo = 1; 1676 break; 1677 } 1678 case BUSFREE_LQO: 1679 clear_fifo = 0; 1680 packetized = 1; 1681 break; 1682 default: 1683 clear_fifo = 0; 1684 packetized = (lqostat1 & LQOBUSFREE) != 0; 1685 if (!packetized 1686 && ahd_inb(ahd, LASTPHASE) == P_BUSFREE) 1687 packetized = 1; 1688 break; 1689 } 1690 1691 #ifdef AHD_DEBUG 1692 if ((ahd_debug & AHD_SHOW_MISC) != 0) 1693 printf("Saw Busfree. Busfreetime = 0x%x.\n", 1694 busfreetime); 1695 #endif 1696 /* 1697 * Busfrees that occur in non-packetized phases are 1698 * handled by the nonpkt_busfree handler. 1699 */ 1700 if (packetized && ahd_inb(ahd, LASTPHASE) == P_BUSFREE) { 1701 restart = ahd_handle_pkt_busfree(ahd, busfreetime); 1702 } else { 1703 packetized = 0; 1704 restart = ahd_handle_nonpkt_busfree(ahd); 1705 } 1706 /* 1707 * Clear the busfree interrupt status. The setting of 1708 * the interrupt is a pulse, so in a perfect world, we 1709 * would not need to muck with the ENBUSFREE logic. This 1710 * would ensure that if the bus moves on to another 1711 * connection, busfree protection is still in force. If 1712 * BUSFREEREV is broken, however, we must manually clear 1713 * the ENBUSFREE if the busfree occurred during a non-pack 1714 * connection so that we don't get false positives during 1715 * future, packetized, connections. 1716 */ 1717 ahd_outb(ahd, CLRSINT1, CLRBUSFREE); 1718 if (packetized == 0 1719 && (ahd->bugs & AHD_BUSFREEREV_BUG) != 0) 1720 ahd_outb(ahd, SIMODE1, 1721 ahd_inb(ahd, SIMODE1) & ~ENBUSFREE); 1722 1723 if (clear_fifo) 1724 ahd_clear_fifo(ahd, mode); 1725 1726 ahd_clear_msg_state(ahd); 1727 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1728 if (restart) { 1729 ahd_restart(ahd); 1730 } else { 1731 ahd_unpause(ahd); 1732 } 1733 } else { 1734 printf("%s: Missing case in ahd_handle_scsiint. status = %x\n", 1735 ahd_name(ahd), status); 1736 ahd_dump_card_state(ahd); 1737 ahd_clear_intstat(ahd); 1738 ahd_unpause(ahd); 1739 } 1740 } 1741 1742 static void 1743 ahd_handle_transmission_error(struct ahd_softc *ahd) 1744 { 1745 struct scb *scb; 1746 u_int scbid; 1747 u_int lqistat1; 1748 u_int lqistat2; 1749 u_int msg_out; 1750 u_int curphase; 1751 u_int lastphase; 1752 u_int perrdiag; 1753 u_int cur_col; 1754 int silent; 1755 1756 scb = NULL; 1757 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1758 lqistat1 = ahd_inb(ahd, LQISTAT1) & ~(LQIPHASE_LQ|LQIPHASE_NLQ); 1759 lqistat2 = ahd_inb(ahd, LQISTAT2); 1760 if ((lqistat1 & (LQICRCI_NLQ|LQICRCI_LQ)) == 0 1761 && (ahd->bugs & AHD_NLQICRC_DELAYED_BUG) != 0) { 1762 u_int lqistate; 1763 1764 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 1765 lqistate = ahd_inb(ahd, LQISTATE); 1766 if ((lqistate >= 0x1E && lqistate <= 0x24) 1767 || (lqistate == 0x29)) { 1768 #ifdef AHD_DEBUG 1769 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1770 printf("%s: NLQCRC found via LQISTATE\n", 1771 ahd_name(ahd)); 1772 } 1773 #endif 1774 lqistat1 |= LQICRCI_NLQ; 1775 } 1776 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1777 } 1778 1779 ahd_outb(ahd, CLRLQIINT1, lqistat1); 1780 lastphase = ahd_inb(ahd, LASTPHASE); 1781 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1782 perrdiag = ahd_inb(ahd, PERRDIAG); 1783 msg_out = MSG_INITIATOR_DET_ERR; 1784 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR); 1785 1786 /* 1787 * Try to find the SCB associated with this error. 1788 */ 1789 silent = FALSE; 1790 if (lqistat1 == 0 1791 || (lqistat1 & LQICRCI_NLQ) != 0) { 1792 if ((lqistat1 & (LQICRCI_NLQ|LQIOVERI_NLQ)) != 0) 1793 ahd_set_active_fifo(ahd); 1794 scbid = ahd_get_scbptr(ahd); 1795 scb = ahd_lookup_scb(ahd, scbid); 1796 if (scb != NULL && SCB_IS_SILENT(scb)) 1797 silent = TRUE; 1798 } 1799 1800 cur_col = 0; 1801 if (silent == FALSE) { 1802 printf("%s: Transmission error detected\n", ahd_name(ahd)); 1803 ahd_lqistat1_print(lqistat1, &cur_col, 50); 1804 ahd_lastphase_print(lastphase, &cur_col, 50); 1805 ahd_scsisigi_print(curphase, &cur_col, 50); 1806 ahd_perrdiag_print(perrdiag, &cur_col, 50); 1807 printf("\n"); 1808 ahd_dump_card_state(ahd); 1809 } 1810 1811 if ((lqistat1 & (LQIOVERI_LQ|LQIOVERI_NLQ)) != 0) { 1812 if (silent == FALSE) { 1813 printf("%s: Gross protocol error during incoming " 1814 "packet. lqistat1 == 0x%x. Resetting bus.\n", 1815 ahd_name(ahd), lqistat1); 1816 } 1817 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1818 return; 1819 } else if ((lqistat1 & LQICRCI_LQ) != 0) { 1820 /* 1821 * A CRC error has been detected on an incoming LQ. 1822 * The bus is currently hung on the last ACK. 1823 * Hit LQIRETRY to release the last ack, and 1824 * wait for the sequencer to determine that ATNO 1825 * is asserted while in message out to take us 1826 * to our host message loop. No NONPACKREQ or 1827 * LQIPHASE type errors will occur in this 1828 * scenario. After this first LQIRETRY, the LQI 1829 * manager will be in ISELO where it will 1830 * happily sit until another packet phase begins. 1831 * Unexpected bus free detection is enabled 1832 * through any phases that occur after we release 1833 * this last ack until the LQI manager sees a 1834 * packet phase. This implies we may have to 1835 * ignore a perfectly valid "unexected busfree" 1836 * after our "initiator detected error" message is 1837 * sent. A busfree is the expected response after 1838 * we tell the target that it's L_Q was corrupted. 1839 * (SPI4R09 10.7.3.3.3) 1840 */ 1841 ahd_outb(ahd, LQCTL2, LQIRETRY); 1842 printf("LQIRetry for LQICRCI_LQ to release ACK\n"); 1843 } else if ((lqistat1 & LQICRCI_NLQ) != 0) { 1844 /* 1845 * We detected a CRC error in a NON-LQ packet. 1846 * The hardware has varying behavior in this situation 1847 * depending on whether this packet was part of a 1848 * stream or not. 1849 * 1850 * PKT by PKT mode: 1851 * The hardware has already acked the complete packet. 1852 * If the target honors our outstanding ATN condition, 1853 * we should be (or soon will be) in MSGOUT phase. 1854 * This will trigger the LQIPHASE_LQ status bit as the 1855 * hardware was expecting another LQ. Unexpected 1856 * busfree detection is enabled. Once LQIPHASE_LQ is 1857 * true (first entry into host message loop is much 1858 * the same), we must clear LQIPHASE_LQ and hit 1859 * LQIRETRY so the hardware is ready to handle 1860 * a future LQ. NONPACKREQ will not be asserted again 1861 * once we hit LQIRETRY until another packet is 1862 * processed. The target may either go busfree 1863 * or start another packet in response to our message. 1864 * 1865 * Read Streaming P0 asserted: 1866 * If we raise ATN and the target completes the entire 1867 * stream (P0 asserted during the last packet), the 1868 * hardware will ack all data and return to the ISTART 1869 * state. When the target reponds to our ATN condition, 1870 * LQIPHASE_LQ will be asserted. We should respond to 1871 * this with an LQIRETRY to prepare for any future 1872 * packets. NONPACKREQ will not be asserted again 1873 * once we hit LQIRETRY until another packet is 1874 * processed. The target may either go busfree or 1875 * start another packet in response to our message. 1876 * Busfree detection is enabled. 1877 * 1878 * Read Streaming P0 not asserted: 1879 * If we raise ATN and the target transitions to 1880 * MSGOUT in or after a packet where P0 is not 1881 * asserted, the hardware will assert LQIPHASE_NLQ. 1882 * We should respond to the LQIPHASE_NLQ with an 1883 * LQIRETRY. Should the target stay in a non-pkt 1884 * phase after we send our message, the hardware 1885 * will assert LQIPHASE_LQ. Recovery is then just as 1886 * listed above for the read streaming with P0 asserted. 1887 * Busfree detection is enabled. 1888 */ 1889 if (silent == FALSE) 1890 printf("LQICRC_NLQ\n"); 1891 if (scb == NULL) { 1892 printf("%s: No SCB valid for LQICRC_NLQ. " 1893 "Resetting bus\n", ahd_name(ahd)); 1894 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1895 return; 1896 } 1897 } else if ((lqistat1 & LQIBADLQI) != 0) { 1898 printf("Need to handle BADLQI!\n"); 1899 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1900 return; 1901 } else if ((perrdiag & (PARITYERR|PREVPHASE)) == PARITYERR) { 1902 if ((curphase & ~P_DATAIN_DT) != 0) { 1903 /* Ack the byte. So we can continue. */ 1904 if (silent == FALSE) 1905 printf("Acking %s to clear perror\n", 1906 ahd_lookup_phase_entry(curphase)->phasemsg); 1907 ahd_inb(ahd, SCSIDAT); 1908 } 1909 1910 if (curphase == P_MESGIN) 1911 msg_out = MSG_PARITY_ERROR; 1912 } 1913 1914 /* 1915 * We've set the hardware to assert ATN if we 1916 * get a parity error on "in" phases, so all we 1917 * need to do is stuff the message buffer with 1918 * the appropriate message. "In" phases have set 1919 * mesg_out to something other than MSG_NOP. 1920 */ 1921 ahd->send_msg_perror = msg_out; 1922 if (scb != NULL && msg_out == MSG_INITIATOR_DET_ERR) 1923 scb->flags |= SCB_TRANSMISSION_ERROR; 1924 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1925 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1926 ahd_unpause(ahd); 1927 } 1928 1929 static void 1930 ahd_handle_lqiphase_error(struct ahd_softc *ahd, u_int lqistat1) 1931 { 1932 /* 1933 * Clear the sources of the interrupts. 1934 */ 1935 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1936 ahd_outb(ahd, CLRLQIINT1, lqistat1); 1937 1938 /* 1939 * If the "illegal" phase changes were in response 1940 * to our ATN to flag a CRC error, AND we ended up 1941 * on packet boundaries, clear the error, restart the 1942 * LQI manager as appropriate, and go on our merry 1943 * way toward sending the message. Otherwise, reset 1944 * the bus to clear the error. 1945 */ 1946 ahd_set_active_fifo(ahd); 1947 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0 1948 && (ahd_inb(ahd, MDFFSTAT) & DLZERO) != 0) { 1949 if ((lqistat1 & LQIPHASE_LQ) != 0) { 1950 printf("LQIRETRY for LQIPHASE_LQ\n"); 1951 ahd_outb(ahd, LQCTL2, LQIRETRY); 1952 } else if ((lqistat1 & LQIPHASE_NLQ) != 0) { 1953 printf("LQIRETRY for LQIPHASE_NLQ\n"); 1954 ahd_outb(ahd, LQCTL2, LQIRETRY); 1955 } else 1956 panic("ahd_handle_lqiphase_error: No phase errors\n"); 1957 ahd_dump_card_state(ahd); 1958 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1959 ahd_unpause(ahd); 1960 } else { 1961 printf("Reseting Channel for LQI Phase error\n"); 1962 ahd_dump_card_state(ahd); 1963 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1964 } 1965 } 1966 1967 /* 1968 * Packetized unexpected or expected busfree. 1969 * Entered in mode based on busfreetime. 1970 */ 1971 static int 1972 ahd_handle_pkt_busfree(struct ahd_softc *ahd, u_int busfreetime) 1973 { 1974 u_int lqostat1; 1975 1976 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 1977 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 1978 lqostat1 = ahd_inb(ahd, LQOSTAT1); 1979 if ((lqostat1 & LQOBUSFREE) != 0) { 1980 struct scb *scb; 1981 u_int scbid; 1982 u_int saved_scbptr; 1983 u_int waiting_h; 1984 u_int waiting_t; 1985 u_int next; 1986 1987 if ((busfreetime & BUSFREE_LQO) == 0) 1988 printf("%s: Warning, BUSFREE time is 0x%x. " 1989 "Expected BUSFREE_LQO.\n", 1990 ahd_name(ahd), busfreetime); 1991 /* 1992 * The LQO manager detected an unexpected busfree 1993 * either: 1994 * 1995 * 1) During an outgoing LQ. 1996 * 2) After an outgoing LQ but before the first 1997 * REQ of the command packet. 1998 * 3) During an outgoing command packet. 1999 * 2000 * In all cases, CURRSCB is pointing to the 2001 * SCB that encountered the failure. Clean 2002 * up the queue, clear SELDO and LQOBUSFREE, 2003 * and allow the sequencer to restart the select 2004 * out at its lesure. 2005 */ 2006 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2007 scbid = ahd_inw(ahd, CURRSCB); 2008 scb = ahd_lookup_scb(ahd, scbid); 2009 if (scb == NULL) 2010 panic("SCB not valid during LQOBUSFREE"); 2011 /* 2012 * Clear the status. 2013 */ 2014 ahd_outb(ahd, CLRLQOINT1, CLRLQOBUSFREE); 2015 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) 2016 ahd_outb(ahd, CLRLQOINT1, 0); 2017 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 2018 ahd_flush_device_writes(ahd); 2019 ahd_outb(ahd, CLRSINT0, CLRSELDO); 2020 2021 /* 2022 * Return the LQO manager to its idle loop. It will 2023 * not do this automatically if the busfree occurs 2024 * after the first REQ of either the LQ or command 2025 * packet or between the LQ and command packet. 2026 */ 2027 ahd_outb(ahd, LQCTL2, ahd_inb(ahd, LQCTL2) | LQOTOIDLE); 2028 2029 /* 2030 * Update the waiting for selection queue so 2031 * we restart on the correct SCB. 2032 */ 2033 waiting_h = ahd_inw(ahd, WAITING_TID_HEAD); 2034 saved_scbptr = ahd_get_scbptr(ahd); 2035 if (waiting_h != scbid) { 2036 2037 ahd_outw(ahd, WAITING_TID_HEAD, scbid); 2038 waiting_t = ahd_inw(ahd, WAITING_TID_TAIL); 2039 if (waiting_t == waiting_h) { 2040 ahd_outw(ahd, WAITING_TID_TAIL, scbid); 2041 next = SCB_LIST_NULL; 2042 } else { 2043 ahd_set_scbptr(ahd, waiting_h); 2044 next = ahd_inw_scbram(ahd, SCB_NEXT2); 2045 } 2046 ahd_set_scbptr(ahd, scbid); 2047 ahd_outw(ahd, SCB_NEXT2, next); 2048 } 2049 ahd_set_scbptr(ahd, saved_scbptr); 2050 if (scb->crc_retry_count < AHD_MAX_LQ_CRC_ERRORS) { 2051 if (SCB_IS_SILENT(scb) == FALSE) { 2052 ahd_print_path(ahd, scb); 2053 printf("Probable outgoing LQ CRC error. " 2054 "Retrying command\n"); 2055 } 2056 scb->crc_retry_count++; 2057 } else { 2058 ahd_set_transaction_status(scb, CAM_UNCOR_PARITY); 2059 ahd_freeze_scb(scb); 2060 ahd_freeze_devq(ahd, scb); 2061 } 2062 /* Return unpausing the sequencer. */ 2063 return (0); 2064 } else if ((ahd_inb(ahd, PERRDIAG) & PARITYERR) != 0) { 2065 /* 2066 * Ignore what are really parity errors that 2067 * occur on the last REQ of a free running 2068 * clock prior to going busfree. Some drives 2069 * do not properly active negate just before 2070 * going busfree resulting in a parity glitch. 2071 */ 2072 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR|CLRBUSFREE); 2073 #ifdef AHD_DEBUG 2074 if ((ahd_debug & AHD_SHOW_MASKED_ERRORS) != 0) 2075 printf("%s: Parity on last REQ detected " 2076 "during busfree phase.\n", 2077 ahd_name(ahd)); 2078 #endif 2079 /* Return unpausing the sequencer. */ 2080 return (0); 2081 } 2082 if (ahd->src_mode != AHD_MODE_SCSI) { 2083 u_int scbid; 2084 struct scb *scb; 2085 2086 scbid = ahd_get_scbptr(ahd); 2087 scb = ahd_lookup_scb(ahd, scbid); 2088 ahd_print_path(ahd, scb); 2089 printf("Unexpected PKT busfree condition\n"); 2090 ahd_dump_card_state(ahd); 2091 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 'A', 2092 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 2093 ROLE_INITIATOR, CAM_UNEXP_BUSFREE); 2094 2095 /* Return restarting the sequencer. */ 2096 return (1); 2097 } 2098 printf("%s: Unexpected PKT busfree condition\n", ahd_name(ahd)); 2099 ahd_dump_card_state(ahd); 2100 /* Restart the sequencer. */ 2101 return (1); 2102 } 2103 2104 /* 2105 * Non-packetized unexpected or expected busfree. 2106 */ 2107 static int 2108 ahd_handle_nonpkt_busfree(struct ahd_softc *ahd) 2109 { 2110 struct ahd_devinfo devinfo; 2111 struct scb *scb; 2112 u_int lastphase; 2113 u_int saved_scsiid; 2114 u_int saved_lun; 2115 u_int target; 2116 u_int initiator_role_id; 2117 u_int scbid; 2118 u_int ppr_busfree; 2119 int printerror; 2120 2121 /* 2122 * Look at what phase we were last in. If its message out, 2123 * chances are pretty good that the busfree was in response 2124 * to one of our abort requests. 2125 */ 2126 lastphase = ahd_inb(ahd, LASTPHASE); 2127 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID); 2128 saved_lun = ahd_inb(ahd, SAVED_LUN); 2129 target = SCSIID_TARGET(ahd, saved_scsiid); 2130 initiator_role_id = SCSIID_OUR_ID(saved_scsiid); 2131 ahd_compile_devinfo(&devinfo, initiator_role_id, 2132 target, saved_lun, 'A', ROLE_INITIATOR); 2133 printerror = 1; 2134 2135 scbid = ahd_get_scbptr(ahd); 2136 scb = ahd_lookup_scb(ahd, scbid); 2137 if (scb != NULL 2138 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0) 2139 scb = NULL; 2140 2141 ppr_busfree = (ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0; 2142 if (lastphase == P_MESGOUT) { 2143 u_int tag; 2144 2145 tag = SCB_LIST_NULL; 2146 if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT_TAG, TRUE) 2147 || ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT, TRUE)) { 2148 int found; 2149 int sent_msg; 2150 2151 if (scb == NULL) { 2152 ahd_print_devinfo(ahd, &devinfo); 2153 printf("Abort for unidentified " 2154 "connection completed.\n"); 2155 /* restart the sequencer. */ 2156 return (1); 2157 } 2158 sent_msg = ahd->msgout_buf[ahd->msgout_index - 1]; 2159 ahd_print_path(ahd, scb); 2160 printf("SCB %d - Abort%s Completed.\n", 2161 SCB_GET_TAG(scb), 2162 sent_msg == MSG_ABORT_TAG ? "" : " Tag"); 2163 2164 if (sent_msg == MSG_ABORT_TAG) 2165 tag = SCB_GET_TAG(scb); 2166 2167 if ((scb->flags & SCB_CMDPHASE_ABORT) != 0) { 2168 /* 2169 * This abort is in response to an 2170 * unexpected switch to command phase 2171 * for a packetized connection. Since 2172 * the identify message was never sent, 2173 * "saved lun" is 0. We really want to 2174 * abort only the SCB that encountered 2175 * this error, which could have a different 2176 * lun. The SCB will be retried so the OS 2177 * will see the UA after renegotiating to 2178 * packetized. 2179 */ 2180 tag = SCB_GET_TAG(scb); 2181 saved_lun = scb->hscb->lun; 2182 } 2183 found = ahd_abort_scbs(ahd, target, 'A', saved_lun, 2184 tag, ROLE_INITIATOR, 2185 CAM_REQ_ABORTED); 2186 printf("found == 0x%x\n", found); 2187 printerror = 0; 2188 } else if (ahd_sent_msg(ahd, AHDMSG_1B, 2189 MSG_BUS_DEV_RESET, TRUE)) { 2190 #ifdef __FreeBSD__ 2191 /* 2192 * Don't mark the user's request for this BDR 2193 * as completing with CAM_BDR_SENT. CAM3 2194 * specifies CAM_REQ_CMP. 2195 */ 2196 if (scb != NULL 2197 && scb->io_ctx->ccb_h.func_code== XPT_RESET_DEV 2198 && ahd_match_scb(ahd, scb, target, 'A', 2199 CAM_LUN_WILDCARD, SCB_LIST_NULL, 2200 ROLE_INITIATOR)) 2201 ahd_set_transaction_status(scb, CAM_REQ_CMP); 2202 #endif 2203 ahd_handle_devreset(ahd, &devinfo, CAM_LUN_WILDCARD, 2204 CAM_BDR_SENT, "Bus Device Reset", 2205 /*verbose_level*/0); 2206 printerror = 0; 2207 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, FALSE) 2208 && ppr_busfree == 0) { 2209 struct ahd_initiator_tinfo *tinfo; 2210 struct ahd_tmode_tstate *tstate; 2211 2212 /* 2213 * PPR Rejected. Try non-ppr negotiation 2214 * and retry command. 2215 */ 2216 #ifdef AHD_DEBUG 2217 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2218 printf("PPR negotiation rejected busfree.\n"); 2219 #endif 2220 tinfo = ahd_fetch_transinfo(ahd, devinfo.channel, 2221 devinfo.our_scsiid, 2222 devinfo.target, &tstate); 2223 tinfo->curr.transport_version = 2; 2224 tinfo->goal.transport_version = 2; 2225 tinfo->goal.ppr_options = 0; 2226 ahd_qinfifo_requeue_tail(ahd, scb); 2227 printerror = 0; 2228 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE) 2229 && ppr_busfree == 0) { 2230 /* 2231 * Negotiation Rejected. Go-narrow and 2232 * retry command. 2233 */ 2234 #ifdef AHD_DEBUG 2235 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2236 printf("WDTR Negotiation rejected busfree.\n"); 2237 #endif 2238 ahd_set_width(ahd, &devinfo, 2239 MSG_EXT_WDTR_BUS_8_BIT, 2240 AHD_TRANS_CUR|AHD_TRANS_GOAL, 2241 /*paused*/TRUE); 2242 ahd_qinfifo_requeue_tail(ahd, scb); 2243 printerror = 0; 2244 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE) 2245 && ppr_busfree == 0) { 2246 /* 2247 * Negotiation Rejected. Go-async and 2248 * retry command. 2249 */ 2250 #ifdef AHD_DEBUG 2251 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2252 printf("SDTR negotiation rejected busfree.\n"); 2253 #endif 2254 ahd_set_syncrate(ahd, &devinfo, 2255 /*period*/0, /*offset*/0, 2256 /*ppr_options*/0, 2257 AHD_TRANS_CUR|AHD_TRANS_GOAL, 2258 /*paused*/TRUE); 2259 ahd_qinfifo_requeue_tail(ahd, scb); 2260 printerror = 0; 2261 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0 2262 && ahd_sent_msg(ahd, AHDMSG_1B, 2263 MSG_INITIATOR_DET_ERR, TRUE)) { 2264 2265 #ifdef AHD_DEBUG 2266 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2267 printf("Expected IDE Busfree\n"); 2268 #endif 2269 printerror = 0; 2270 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_QASREJ_BUSFREE) 2271 && ahd_sent_msg(ahd, AHDMSG_1B, 2272 MSG_MESSAGE_REJECT, TRUE)) { 2273 2274 #ifdef AHD_DEBUG 2275 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2276 printf("Expected QAS Reject Busfree\n"); 2277 #endif 2278 printerror = 0; 2279 } 2280 } 2281 2282 /* 2283 * The busfree required flag is honored at the end of 2284 * the message phases. We check it last in case we 2285 * had to send some other message that caused a busfree. 2286 */ 2287 if (printerror != 0 2288 && (lastphase == P_MESGIN || lastphase == P_MESGOUT) 2289 && ((ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0)) { 2290 2291 ahd_freeze_devq(ahd, scb); 2292 ahd_set_transaction_status(scb, CAM_REQUEUE_REQ); 2293 ahd_freeze_scb(scb); 2294 if ((ahd->msg_flags & MSG_FLAG_IU_REQ_CHANGED) != 0) { 2295 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 2296 SCB_GET_CHANNEL(ahd, scb), 2297 SCB_GET_LUN(scb), SCB_LIST_NULL, 2298 ROLE_INITIATOR, CAM_REQ_ABORTED); 2299 } else { 2300 #ifdef AHD_DEBUG 2301 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2302 printf("PPR Negotiation Busfree.\n"); 2303 #endif 2304 ahd_done(ahd, scb); 2305 } 2306 printerror = 0; 2307 } 2308 if (printerror != 0) { 2309 int aborted; 2310 2311 aborted = 0; 2312 if (scb != NULL) { 2313 u_int tag; 2314 2315 if ((scb->hscb->control & TAG_ENB) != 0) 2316 tag = SCB_GET_TAG(scb); 2317 else 2318 tag = SCB_LIST_NULL; 2319 ahd_print_path(ahd, scb); 2320 aborted = ahd_abort_scbs(ahd, target, 'A', 2321 SCB_GET_LUN(scb), tag, 2322 ROLE_INITIATOR, 2323 CAM_UNEXP_BUSFREE); 2324 } else { 2325 /* 2326 * We had not fully identified this connection, 2327 * so we cannot abort anything. 2328 */ 2329 printf("%s: ", ahd_name(ahd)); 2330 } 2331 if (lastphase != P_BUSFREE) 2332 ahd_force_renegotiation(ahd, &devinfo); 2333 printf("Unexpected busfree %s, %d SCBs aborted, " 2334 "PRGMCNT == 0x%x\n", 2335 ahd_lookup_phase_entry(lastphase)->phasemsg, 2336 aborted, 2337 ahd_inb(ahd, PRGMCNT) 2338 | (ahd_inb(ahd, PRGMCNT+1) << 8)); 2339 ahd_dump_card_state(ahd); 2340 } 2341 /* Always restart the sequencer. */ 2342 return (1); 2343 } 2344 2345 static void 2346 ahd_handle_proto_violation(struct ahd_softc *ahd) 2347 { 2348 struct ahd_devinfo devinfo; 2349 struct scb *scb; 2350 u_int scbid; 2351 u_int seq_flags; 2352 u_int curphase; 2353 u_int lastphase; 2354 int found; 2355 2356 ahd_fetch_devinfo(ahd, &devinfo); 2357 scbid = ahd_get_scbptr(ahd); 2358 scb = ahd_lookup_scb(ahd, scbid); 2359 seq_flags = ahd_inb(ahd, SEQ_FLAGS); 2360 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 2361 lastphase = ahd_inb(ahd, LASTPHASE); 2362 if ((seq_flags & NOT_IDENTIFIED) != 0) { 2363 2364 /* 2365 * The reconnecting target either did not send an 2366 * identify message, or did, but we didn't find an SCB 2367 * to match. 2368 */ 2369 ahd_print_devinfo(ahd, &devinfo); 2370 printf("Target did not send an IDENTIFY message. " 2371 "LASTPHASE = 0x%x.\n", lastphase); 2372 scb = NULL; 2373 } else if (scb == NULL) { 2374 /* 2375 * We don't seem to have an SCB active for this 2376 * transaction. Print an error and reset the bus. 2377 */ 2378 ahd_print_devinfo(ahd, &devinfo); 2379 printf("No SCB found during protocol violation\n"); 2380 goto proto_violation_reset; 2381 } else { 2382 ahd_set_transaction_status(scb, CAM_SEQUENCE_FAIL); 2383 if ((seq_flags & NO_CDB_SENT) != 0) { 2384 ahd_print_path(ahd, scb); 2385 printf("No or incomplete CDB sent to device.\n"); 2386 } else if ((ahd_inb_scbram(ahd, SCB_CONTROL) 2387 & STATUS_RCVD) == 0) { 2388 /* 2389 * The target never bothered to provide status to 2390 * us prior to completing the command. Since we don't 2391 * know the disposition of this command, we must attempt 2392 * to abort it. Assert ATN and prepare to send an abort 2393 * message. 2394 */ 2395 ahd_print_path(ahd, scb); 2396 printf("Completed command without status.\n"); 2397 } else { 2398 ahd_print_path(ahd, scb); 2399 printf("Unknown protocol violation.\n"); 2400 ahd_dump_card_state(ahd); 2401 } 2402 } 2403 if ((lastphase & ~P_DATAIN_DT) == 0 2404 || lastphase == P_COMMAND) { 2405 proto_violation_reset: 2406 /* 2407 * Target either went directly to data 2408 * phase or didn't respond to our ATN. 2409 * The only safe thing to do is to blow 2410 * it away with a bus reset. 2411 */ 2412 found = ahd_reset_channel(ahd, 'A', TRUE); 2413 printf("%s: Issued Channel %c Bus Reset. " 2414 "%d SCBs aborted\n", ahd_name(ahd), 'A', found); 2415 } else { 2416 /* 2417 * Leave the selection hardware off in case 2418 * this abort attempt will affect yet to 2419 * be sent commands. 2420 */ 2421 ahd_outb(ahd, SCSISEQ0, 2422 ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 2423 ahd_assert_atn(ahd); 2424 ahd_outb(ahd, MSG_OUT, HOST_MSG); 2425 if (scb == NULL) { 2426 ahd_print_devinfo(ahd, &devinfo); 2427 ahd->msgout_buf[0] = MSG_ABORT_TASK; 2428 ahd->msgout_len = 1; 2429 ahd->msgout_index = 0; 2430 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 2431 } else { 2432 ahd_print_path(ahd, scb); 2433 scb->flags |= SCB_ABORT; 2434 } 2435 printf("Protocol violation %s. Attempting to abort.\n", 2436 ahd_lookup_phase_entry(curphase)->phasemsg); 2437 } 2438 } 2439 2440 /* 2441 * Force renegotiation to occur the next time we initiate 2442 * a command to the current device. 2443 */ 2444 static void 2445 ahd_force_renegotiation(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 2446 { 2447 struct ahd_initiator_tinfo *targ_info; 2448 struct ahd_tmode_tstate *tstate; 2449 2450 #ifdef AHD_DEBUG 2451 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 2452 ahd_print_devinfo(ahd, devinfo); 2453 printf("Forcing renegotiation\n"); 2454 } 2455 #endif 2456 targ_info = ahd_fetch_transinfo(ahd, 2457 devinfo->channel, 2458 devinfo->our_scsiid, 2459 devinfo->target, 2460 &tstate); 2461 ahd_update_neg_request(ahd, devinfo, tstate, 2462 targ_info, AHD_NEG_IF_NON_ASYNC); 2463 } 2464 2465 #define AHD_MAX_STEPS 2000 2466 void 2467 ahd_clear_critical_section(struct ahd_softc *ahd) 2468 { 2469 ahd_mode_state saved_modes; 2470 int stepping; 2471 int steps; 2472 int first_instr; 2473 u_int simode0; 2474 u_int simode1; 2475 u_int simode3; 2476 u_int lqimode0; 2477 u_int lqimode1; 2478 u_int lqomode0; 2479 u_int lqomode1; 2480 2481 if (ahd->num_critical_sections == 0) 2482 return; 2483 2484 stepping = FALSE; 2485 steps = 0; 2486 first_instr = 0; 2487 simode0 = 0; 2488 simode1 = 0; 2489 simode3 = 0; 2490 lqimode0 = 0; 2491 lqimode1 = 0; 2492 lqomode0 = 0; 2493 lqomode1 = 0; 2494 saved_modes = ahd_save_modes(ahd); 2495 for (;;) { 2496 struct cs *cs; 2497 u_int seqaddr; 2498 u_int i; 2499 2500 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2501 seqaddr = ahd_inb(ahd, CURADDR) 2502 | (ahd_inb(ahd, CURADDR+1) << 8); 2503 2504 cs = ahd->critical_sections; 2505 for (i = 0; i < ahd->num_critical_sections; i++, cs++) { 2506 2507 if (cs->begin < seqaddr && cs->end >= seqaddr) 2508 break; 2509 } 2510 2511 if (i == ahd->num_critical_sections) 2512 break; 2513 2514 if (steps > AHD_MAX_STEPS) { 2515 printf("%s: Infinite loop in critical section\n" 2516 "%s: First Instruction 0x%x now 0x%x\n", 2517 ahd_name(ahd), ahd_name(ahd), first_instr, 2518 seqaddr); 2519 ahd_dump_card_state(ahd); 2520 panic("critical section loop"); 2521 } 2522 2523 steps++; 2524 #ifdef AHD_DEBUG 2525 if ((ahd_debug & AHD_SHOW_MISC) != 0) 2526 printf("%s: Single stepping at 0x%x\n", ahd_name(ahd), 2527 seqaddr); 2528 #endif 2529 if (stepping == FALSE) { 2530 2531 first_instr = seqaddr; 2532 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 2533 simode0 = ahd_inb(ahd, SIMODE0); 2534 simode3 = ahd_inb(ahd, SIMODE3); 2535 lqimode0 = ahd_inb(ahd, LQIMODE0); 2536 lqimode1 = ahd_inb(ahd, LQIMODE1); 2537 lqomode0 = ahd_inb(ahd, LQOMODE0); 2538 lqomode1 = ahd_inb(ahd, LQOMODE1); 2539 ahd_outb(ahd, SIMODE0, 0); 2540 ahd_outb(ahd, SIMODE3, 0); 2541 ahd_outb(ahd, LQIMODE0, 0); 2542 ahd_outb(ahd, LQIMODE1, 0); 2543 ahd_outb(ahd, LQOMODE0, 0); 2544 ahd_outb(ahd, LQOMODE1, 0); 2545 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2546 simode1 = ahd_inb(ahd, SIMODE1); 2547 /* 2548 * We don't clear ENBUSFREE. Unfortunately 2549 * we cannot re-enable busfree detection within 2550 * the current connection, so we must leave it 2551 * on while single stepping. 2552 */ 2553 ahd_outb(ahd, SIMODE1, simode1 & ENBUSFREE); 2554 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) | STEP); 2555 stepping = TRUE; 2556 } 2557 ahd_outb(ahd, CLRSINT1, CLRBUSFREE); 2558 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2559 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode); 2560 ahd_outb(ahd, HCNTRL, ahd->unpause); 2561 while (!ahd_is_paused(ahd)) 2562 ahd_delay(200); 2563 ahd_update_modes(ahd); 2564 } 2565 if (stepping) { 2566 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 2567 ahd_outb(ahd, SIMODE0, simode0); 2568 ahd_outb(ahd, SIMODE3, simode3); 2569 ahd_outb(ahd, LQIMODE0, lqimode0); 2570 ahd_outb(ahd, LQIMODE1, lqimode1); 2571 ahd_outb(ahd, LQOMODE0, lqomode0); 2572 ahd_outb(ahd, LQOMODE1, lqomode1); 2573 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2574 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP); 2575 ahd_outb(ahd, SIMODE1, simode1); 2576 /* 2577 * SCSIINT seems to glitch occassionally when 2578 * the interrupt masks are restored. Clear SCSIINT 2579 * one more time so that only persistent errors 2580 * are seen as a real interrupt. 2581 */ 2582 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2583 } 2584 ahd_restore_modes(ahd, saved_modes); 2585 } 2586 2587 /* 2588 * Clear any pending interrupt status. 2589 */ 2590 void 2591 ahd_clear_intstat(struct ahd_softc *ahd) 2592 { 2593 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 2594 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 2595 /* Clear any interrupt conditions this may have caused */ 2596 ahd_outb(ahd, CLRLQIINT0, CLRLQIATNQAS|CLRLQICRCT1|CLRLQICRCT2 2597 |CLRLQIBADLQT|CLRLQIATNLQ|CLRLQIATNCMD); 2598 ahd_outb(ahd, CLRLQIINT1, CLRLQIPHASE_LQ|CLRLQIPHASE_NLQ|CLRLIQABORT 2599 |CLRLQICRCI_LQ|CLRLQICRCI_NLQ|CLRLQIBADLQI 2600 |CLRLQIOVERI_LQ|CLRLQIOVERI_NLQ|CLRNONPACKREQ); 2601 ahd_outb(ahd, CLRLQOINT0, CLRLQOTARGSCBPERR|CLRLQOSTOPT2|CLRLQOATNLQ 2602 |CLRLQOATNPKT|CLRLQOTCRC); 2603 ahd_outb(ahd, CLRLQOINT1, CLRLQOINITSCBPERR|CLRLQOSTOPI2|CLRLQOBADQAS 2604 |CLRLQOBUSFREE|CLRLQOPHACHGINPKT); 2605 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) { 2606 ahd_outb(ahd, CLRLQOINT0, 0); 2607 ahd_outb(ahd, CLRLQOINT1, 0); 2608 } 2609 ahd_outb(ahd, CLRSINT3, CLRNTRAMPERR|CLROSRAMPERR); 2610 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI 2611 |CLRBUSFREE|CLRSCSIPERR|CLRREQINIT); 2612 ahd_outb(ahd, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO 2613 |CLRIOERR|CLROVERRUN); 2614 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2615 } 2616 2617 /**************************** Debugging Routines ******************************/ 2618 #ifdef AHD_DEBUG 2619 uint32_t ahd_debug = AHD_DEBUG_OPTS; 2620 #endif 2621 void 2622 ahd_print_scb(struct scb *scb) 2623 { 2624 struct hardware_scb *hscb; 2625 int i; 2626 2627 hscb = scb->hscb; 2628 printf("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n", 2629 (void *)scb, 2630 hscb->control, 2631 hscb->scsiid, 2632 hscb->lun, 2633 hscb->cdb_len); 2634 printf("Shared Data: "); 2635 for (i = 0; i < sizeof(hscb->shared_data.idata.cdb); i++) 2636 printf("%#02x", hscb->shared_data.idata.cdb[i]); 2637 printf(" dataptr:%#x%x datacnt:%#x sgptr:%#x tag:%#x\n", 2638 (uint32_t)((ahd_le64toh(hscb->dataptr) >> 32) & 0xFFFFFFFF), 2639 (uint32_t)(ahd_le64toh(hscb->dataptr) & 0xFFFFFFFF), 2640 ahd_le32toh(hscb->datacnt), 2641 ahd_le32toh(hscb->sgptr), 2642 SCB_GET_TAG(scb)); 2643 ahd_dump_sglist(scb); 2644 } 2645 2646 void 2647 ahd_dump_sglist(struct scb *scb) 2648 { 2649 int i; 2650 2651 if (scb->sg_count > 0) { 2652 if ((scb->ahd_softc->flags & AHD_64BIT_ADDRESSING) != 0) { 2653 struct ahd_dma64_seg *sg_list; 2654 2655 sg_list = (struct ahd_dma64_seg*)scb->sg_list; 2656 for (i = 0; i < scb->sg_count; i++) { 2657 uint64_t addr; 2658 uint32_t len; 2659 2660 addr = ahd_le64toh(sg_list[i].addr); 2661 len = ahd_le32toh(sg_list[i].len); 2662 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n", 2663 i, 2664 (uint32_t)((addr >> 32) & 0xFFFFFFFF), 2665 (uint32_t)(addr & 0xFFFFFFFF), 2666 sg_list[i].len & AHD_SG_LEN_MASK, 2667 (sg_list[i].len & AHD_DMA_LAST_SEG) 2668 ? " Last" : ""); 2669 } 2670 } else { 2671 struct ahd_dma_seg *sg_list; 2672 2673 sg_list = (struct ahd_dma_seg*)scb->sg_list; 2674 for (i = 0; i < scb->sg_count; i++) { 2675 uint32_t len; 2676 2677 len = ahd_le32toh(sg_list[i].len); 2678 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n", 2679 i, 2680 (len & AHD_SG_HIGH_ADDR_MASK) >> 24, 2681 ahd_le32toh(sg_list[i].addr), 2682 len & AHD_SG_LEN_MASK, 2683 len & AHD_DMA_LAST_SEG ? " Last" : ""); 2684 } 2685 } 2686 } 2687 } 2688 2689 /************************* Transfer Negotiation *******************************/ 2690 /* 2691 * Allocate per target mode instance (ID we respond to as a target) 2692 * transfer negotiation data structures. 2693 */ 2694 static struct ahd_tmode_tstate * 2695 ahd_alloc_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel) 2696 { 2697 struct ahd_tmode_tstate *master_tstate; 2698 struct ahd_tmode_tstate *tstate; 2699 int i; 2700 2701 master_tstate = ahd->enabled_targets[ahd->our_id]; 2702 if (ahd->enabled_targets[scsi_id] != NULL 2703 && ahd->enabled_targets[scsi_id] != master_tstate) 2704 panic("%s: ahd_alloc_tstate - Target already allocated", 2705 ahd_name(ahd)); 2706 tstate = malloc(sizeof(*tstate), M_DEVBUF, M_NOWAIT | M_ZERO); 2707 if (tstate == NULL) 2708 return (NULL); 2709 2710 /* 2711 * If we have allocated a master tstate, copy user settings from 2712 * the master tstate (taken from SRAM or the EEPROM) for this 2713 * channel, but reset our current and goal settings to async/narrow 2714 * until an initiator talks to us. 2715 */ 2716 if (master_tstate != NULL) { 2717 memcpy(tstate, master_tstate, sizeof(*tstate)); 2718 memset(tstate->enabled_luns, 0, sizeof(tstate->enabled_luns)); 2719 for (i = 0; i < 16; i++) { 2720 memset(&tstate->transinfo[i].curr, 0, 2721 sizeof(tstate->transinfo[i].curr)); 2722 memset(&tstate->transinfo[i].goal, 0, 2723 sizeof(tstate->transinfo[i].goal)); 2724 } 2725 } else 2726 memset(tstate, 0, sizeof(*tstate)); 2727 ahd->enabled_targets[scsi_id] = tstate; 2728 return (tstate); 2729 } 2730 2731 #ifdef AHD_TARGET_MODE 2732 /* 2733 * Free per target mode instance (ID we respond to as a target) 2734 * transfer negotiation data structures. 2735 */ 2736 static void 2737 ahd_free_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel, int force) 2738 { 2739 struct ahd_tmode_tstate *tstate; 2740 2741 /* 2742 * Don't clean up our "master" tstate. 2743 * It has our default user settings. 2744 */ 2745 if (scsi_id == ahd->our_id 2746 && force == FALSE) 2747 return; 2748 2749 tstate = ahd->enabled_targets[scsi_id]; 2750 if (tstate != NULL) 2751 free(tstate, M_DEVBUF); 2752 ahd->enabled_targets[scsi_id] = NULL; 2753 } 2754 #endif 2755 2756 /* 2757 * Called when we have an active connection to a target on the bus, 2758 * this function finds the nearest period to the input period limited 2759 * by the capabilities of the bus connectivity of and sync settings for 2760 * the target. 2761 */ 2762 void 2763 ahd_devlimited_syncrate(struct ahd_softc *ahd, 2764 struct ahd_initiator_tinfo *tinfo, 2765 u_int *period, u_int *ppr_options, role_t role) 2766 { 2767 struct ahd_transinfo *transinfo; 2768 u_int maxsync; 2769 2770 if ((ahd_inb(ahd, SBLKCTL) & ENAB40) != 0 2771 && (ahd_inb(ahd, SSTAT2) & EXP_ACTIVE) == 0) { 2772 maxsync = AHD_SYNCRATE_PACED; 2773 } else { 2774 maxsync = AHD_SYNCRATE_ULTRA; 2775 /* Can't do DT related options on an SE bus */ 2776 *ppr_options &= MSG_EXT_PPR_QAS_REQ; 2777 } 2778 /* 2779 * Never allow a value higher than our current goal 2780 * period otherwise we may allow a target initiated 2781 * negotiation to go above the limit as set by the 2782 * user. In the case of an initiator initiated 2783 * sync negotiation, we limit based on the user 2784 * setting. This allows the system to still accept 2785 * incoming negotiations even if target initiated 2786 * negotiation is not performed. 2787 */ 2788 if (role == ROLE_TARGET) 2789 transinfo = &tinfo->user; 2790 else 2791 transinfo = &tinfo->goal; 2792 *ppr_options &= (transinfo->ppr_options|MSG_EXT_PPR_PCOMP_EN); 2793 if (transinfo->width == MSG_EXT_WDTR_BUS_8_BIT) { 2794 maxsync = MAX(maxsync, AHD_SYNCRATE_ULTRA2); 2795 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 2796 } 2797 if (transinfo->period == 0) { 2798 *period = 0; 2799 *ppr_options = 0; 2800 } else { 2801 *period = MAX(*period, transinfo->period); 2802 ahd_find_syncrate(ahd, period, ppr_options, maxsync); 2803 } 2804 } 2805 2806 /* 2807 * Look up the valid period to SCSIRATE conversion in our table. 2808 * Return the period and offset that should be sent to the target 2809 * if this was the beginning of an SDTR. 2810 */ 2811 void 2812 ahd_find_syncrate(struct ahd_softc *ahd, u_int *period, 2813 u_int *ppr_options, u_int maxsync) 2814 { 2815 if (*period < maxsync) 2816 *period = maxsync; 2817 2818 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) != 0 2819 && *period > AHD_SYNCRATE_MIN_DT) 2820 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 2821 2822 if (*period > AHD_SYNCRATE_MIN) 2823 *period = 0; 2824 2825 /* Honor PPR option conformance rules. */ 2826 if (*period > AHD_SYNCRATE_PACED) 2827 *ppr_options &= ~MSG_EXT_PPR_RTI; 2828 2829 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0) 2830 *ppr_options &= (MSG_EXT_PPR_DT_REQ|MSG_EXT_PPR_QAS_REQ); 2831 2832 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0) 2833 *ppr_options &= MSG_EXT_PPR_QAS_REQ; 2834 2835 /* Skip all PACED only entries if IU is not available */ 2836 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0 2837 && *period < AHD_SYNCRATE_DT) 2838 *period = AHD_SYNCRATE_DT; 2839 2840 /* Skip all DT only entries if DT is not available */ 2841 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0 2842 && *period < AHD_SYNCRATE_ULTRA2) 2843 *period = AHD_SYNCRATE_ULTRA2; 2844 } 2845 2846 /* 2847 * Truncate the given synchronous offset to a value the 2848 * current adapter type and syncrate are capable of. 2849 */ 2850 void 2851 ahd_validate_offset(struct ahd_softc *ahd, 2852 struct ahd_initiator_tinfo *tinfo, 2853 u_int period, u_int *offset, int wide, 2854 role_t role) 2855 { 2856 u_int maxoffset; 2857 2858 /* Limit offset to what we can do */ 2859 if (period == 0) 2860 maxoffset = 0; 2861 else if (period <= AHD_SYNCRATE_PACED) { 2862 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) 2863 maxoffset = MAX_OFFSET_PACED_BUG; 2864 else 2865 maxoffset = MAX_OFFSET_PACED; 2866 } else 2867 maxoffset = MAX_OFFSET_NON_PACED; 2868 *offset = MIN(*offset, maxoffset); 2869 if (tinfo != NULL) { 2870 if (role == ROLE_TARGET) 2871 *offset = MIN(*offset, tinfo->user.offset); 2872 else 2873 *offset = MIN(*offset, tinfo->goal.offset); 2874 } 2875 } 2876 2877 /* 2878 * Truncate the given transfer width parameter to a value the 2879 * current adapter type is capable of. 2880 */ 2881 void 2882 ahd_validate_width(struct ahd_softc *ahd, struct ahd_initiator_tinfo *tinfo, 2883 u_int *bus_width, role_t role) 2884 { 2885 switch (*bus_width) { 2886 default: 2887 if (ahd->features & AHD_WIDE) { 2888 /* Respond Wide */ 2889 *bus_width = MSG_EXT_WDTR_BUS_16_BIT; 2890 break; 2891 } 2892 /* FALLTHROUGH */ 2893 case MSG_EXT_WDTR_BUS_8_BIT: 2894 *bus_width = MSG_EXT_WDTR_BUS_8_BIT; 2895 break; 2896 } 2897 if (tinfo != NULL) { 2898 if (role == ROLE_TARGET) 2899 *bus_width = MIN(tinfo->user.width, *bus_width); 2900 else 2901 *bus_width = MIN(tinfo->goal.width, *bus_width); 2902 } 2903 } 2904 2905 /* 2906 * Update the bitmask of targets for which the controller should 2907 * negotiate with at the next convenient opportunity. This currently 2908 * means the next time we send the initial identify messages for 2909 * a new transaction. 2910 */ 2911 int 2912 ahd_update_neg_request(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 2913 struct ahd_tmode_tstate *tstate, 2914 struct ahd_initiator_tinfo *tinfo, ahd_neg_type neg_type) 2915 { 2916 u_int auto_negotiate_orig; 2917 2918 auto_negotiate_orig = tstate->auto_negotiate; 2919 if (neg_type == AHD_NEG_ALWAYS) { 2920 /* 2921 * Force our "current" settings to be 2922 * unknown so that unless a bus reset 2923 * occurs the need to renegotiate is 2924 * recorded persistently. 2925 */ 2926 if ((ahd->features & AHD_WIDE) != 0) 2927 tinfo->curr.width = AHD_WIDTH_UNKNOWN; 2928 tinfo->curr.period = AHD_PERIOD_UNKNOWN; 2929 tinfo->curr.offset = AHD_OFFSET_UNKNOWN; 2930 } 2931 if (tinfo->curr.period != tinfo->goal.period 2932 || tinfo->curr.width != tinfo->goal.width 2933 || tinfo->curr.offset != tinfo->goal.offset 2934 || tinfo->curr.ppr_options != tinfo->goal.ppr_options 2935 || (neg_type == AHD_NEG_IF_NON_ASYNC 2936 && (tinfo->goal.offset != 0 2937 || tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT 2938 || tinfo->goal.ppr_options != 0))) 2939 tstate->auto_negotiate |= devinfo->target_mask; 2940 else 2941 tstate->auto_negotiate &= ~devinfo->target_mask; 2942 2943 return (auto_negotiate_orig != tstate->auto_negotiate); 2944 } 2945 2946 /* 2947 * Update the user/goal/curr tables of synchronous negotiation 2948 * parameters as well as, in the case of a current or active update, 2949 * any data structures on the host controller. In the case of an 2950 * active update, the specified target is currently talking to us on 2951 * the bus, so the transfer parameter update must take effect 2952 * immediately. 2953 */ 2954 void 2955 ahd_set_syncrate(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 2956 u_int period, u_int offset, u_int ppr_options, 2957 u_int type, int paused) 2958 { 2959 struct ahd_initiator_tinfo *tinfo; 2960 struct ahd_tmode_tstate *tstate; 2961 u_int old_period; 2962 u_int old_offset; 2963 u_int old_ppr; 2964 int active; 2965 int update_needed; 2966 2967 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE; 2968 update_needed = 0; 2969 2970 if (period == 0 || offset == 0) { 2971 period = 0; 2972 offset = 0; 2973 } 2974 2975 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 2976 devinfo->target, &tstate); 2977 2978 if ((type & AHD_TRANS_USER) != 0) { 2979 tinfo->user.period = period; 2980 tinfo->user.offset = offset; 2981 tinfo->user.ppr_options = ppr_options; 2982 } 2983 2984 if ((type & AHD_TRANS_GOAL) != 0) { 2985 tinfo->goal.period = period; 2986 tinfo->goal.offset = offset; 2987 tinfo->goal.ppr_options = ppr_options; 2988 } 2989 2990 old_period = tinfo->curr.period; 2991 old_offset = tinfo->curr.offset; 2992 old_ppr = tinfo->curr.ppr_options; 2993 2994 if ((type & AHD_TRANS_CUR) != 0 2995 && (old_period != period 2996 || old_offset != offset 2997 || old_ppr != ppr_options)) { 2998 2999 update_needed++; 3000 3001 tinfo->curr.period = period; 3002 tinfo->curr.offset = offset; 3003 tinfo->curr.ppr_options = ppr_options; 3004 3005 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3006 CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL); 3007 3008 if (bootverbose) { 3009 if (offset != 0) { 3010 int options; 3011 3012 printf("%s: target %d synchronous with " 3013 "period = 0x%x, offset = 0x%x", 3014 ahd_name(ahd), devinfo->target, 3015 period, offset); 3016 options = 0; 3017 if ((ppr_options & MSG_EXT_PPR_RD_STRM) != 0) { 3018 printf("(RDSTRM"); 3019 options++; 3020 } 3021 if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0) { 3022 printf("%s", options ? "|DT" : "(DT"); 3023 options++; 3024 } 3025 if ((ppr_options & MSG_EXT_PPR_IU_REQ) != 0) { 3026 printf("%s", options ? "|IU" : "(IU"); 3027 options++; 3028 } 3029 if ((ppr_options & MSG_EXT_PPR_RTI) != 0) { 3030 printf("%s", options ? "|RTI" : "(RTI"); 3031 options++; 3032 } 3033 if ((ppr_options & MSG_EXT_PPR_QAS_REQ) != 0) { 3034 printf("%s", options ? "|QAS" : "(QAS"); 3035 options++; 3036 } 3037 if (options != 0) 3038 printf(")\n"); 3039 else 3040 printf("\n"); 3041 } else { 3042 printf("%s: target %d using " 3043 "asynchronous transfers%s\n", 3044 ahd_name(ahd), devinfo->target, 3045 (ppr_options & MSG_EXT_PPR_QAS_REQ) != 0 3046 ? "(QAS)" : ""); 3047 } 3048 } 3049 } 3050 /* 3051 * Always refresh the neg-table to handle the case of the 3052 * sequencer setting the ENATNO bit for a MK_MESSAGE request. 3053 * We will always renegotiate in that case if this is a 3054 * packetized request. Also manage the busfree expected flag 3055 * from this common routine so that we catch changes due to 3056 * WDTR or SDTR messages. 3057 */ 3058 if ((type & AHD_TRANS_CUR) != 0) { 3059 if (!paused) 3060 ahd_pause(ahd); 3061 ahd_update_neg_table(ahd, devinfo, &tinfo->curr); 3062 if (!paused) 3063 ahd_unpause(ahd); 3064 if (ahd->msg_type != MSG_TYPE_NONE) { 3065 if ((old_ppr & MSG_EXT_PPR_IU_REQ) 3066 != (ppr_options & MSG_EXT_PPR_IU_REQ)) { 3067 #ifdef AHD_DEBUG 3068 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3069 ahd_print_devinfo(ahd, devinfo); 3070 printf("Expecting IU Change busfree\n"); 3071 } 3072 #endif 3073 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE 3074 | MSG_FLAG_IU_REQ_CHANGED; 3075 } 3076 if ((old_ppr & MSG_EXT_PPR_IU_REQ) != 0) { 3077 #ifdef AHD_DEBUG 3078 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3079 printf("PPR with IU_REQ outstanding\n"); 3080 #endif 3081 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE; 3082 } 3083 } 3084 } 3085 3086 update_needed += ahd_update_neg_request(ahd, devinfo, tstate, 3087 tinfo, AHD_NEG_TO_GOAL); 3088 3089 if (update_needed && active) 3090 ahd_update_pending_scbs(ahd); 3091 } 3092 3093 /* 3094 * Update the user/goal/curr tables of wide negotiation 3095 * parameters as well as, in the case of a current or active update, 3096 * any data structures on the host controller. In the case of an 3097 * active update, the specified target is currently talking to us on 3098 * the bus, so the transfer parameter update must take effect 3099 * immediately. 3100 */ 3101 void 3102 ahd_set_width(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3103 u_int width, u_int type, int paused) 3104 { 3105 struct ahd_initiator_tinfo *tinfo; 3106 struct ahd_tmode_tstate *tstate; 3107 u_int oldwidth; 3108 int active; 3109 int update_needed; 3110 3111 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE; 3112 update_needed = 0; 3113 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 3114 devinfo->target, &tstate); 3115 3116 if ((type & AHD_TRANS_USER) != 0) 3117 tinfo->user.width = width; 3118 3119 if ((type & AHD_TRANS_GOAL) != 0) 3120 tinfo->goal.width = width; 3121 3122 oldwidth = tinfo->curr.width; 3123 if ((type & AHD_TRANS_CUR) != 0 && oldwidth != width) { 3124 3125 update_needed++; 3126 3127 tinfo->curr.width = width; 3128 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3129 CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL); 3130 3131 if (bootverbose) { 3132 printf("%s: target %d using %dbit transfers\n", 3133 ahd_name(ahd), devinfo->target, 3134 8 * (0x01 << width)); 3135 } 3136 } 3137 3138 if ((type & AHD_TRANS_CUR) != 0) { 3139 if (!paused) 3140 ahd_pause(ahd); 3141 ahd_update_neg_table(ahd, devinfo, &tinfo->curr); 3142 if (!paused) 3143 ahd_unpause(ahd); 3144 } 3145 3146 update_needed += ahd_update_neg_request(ahd, devinfo, tstate, 3147 tinfo, AHD_NEG_TO_GOAL); 3148 if (update_needed && active) 3149 ahd_update_pending_scbs(ahd); 3150 3151 } 3152 3153 /* 3154 * Update the current state of tagged queuing for a given target. 3155 */ 3156 void 3157 ahd_set_tags(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3158 ahd_queue_alg alg) 3159 { 3160 ahd_platform_set_tags(ahd, devinfo, alg); 3161 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3162 devinfo->lun, AC_TRANSFER_NEG, &alg); 3163 } 3164 3165 static void 3166 ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3167 struct ahd_transinfo *tinfo) 3168 { 3169 ahd_mode_state saved_modes; 3170 u_int period; 3171 u_int ppr_opts; 3172 u_int con_opts; 3173 u_int offset; 3174 u_int saved_negoaddr; 3175 uint8_t iocell_opts[sizeof(ahd->iocell_opts)]; 3176 3177 saved_modes = ahd_save_modes(ahd); 3178 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3179 3180 saved_negoaddr = ahd_inb(ahd, NEGOADDR); 3181 ahd_outb(ahd, NEGOADDR, devinfo->target); 3182 period = tinfo->period; 3183 offset = tinfo->offset; 3184 memcpy(iocell_opts, ahd->iocell_opts, sizeof(ahd->iocell_opts)); 3185 ppr_opts = tinfo->ppr_options & (MSG_EXT_PPR_QAS_REQ|MSG_EXT_PPR_DT_REQ 3186 |MSG_EXT_PPR_IU_REQ|MSG_EXT_PPR_RTI); 3187 con_opts = 0; 3188 if (period == 0) 3189 period = AHD_SYNCRATE_ASYNC; 3190 if (period == AHD_SYNCRATE_160) { 3191 3192 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) { 3193 /* 3194 * When the SPI4 spec was finalized, PACE transfers 3195 * was not made a configurable option in the PPR 3196 * message. Instead it is assumed to be enabled for 3197 * any syncrate faster than 80MHz. Nevertheless, 3198 * Harpoon2A4 allows this to be configurable. 3199 * 3200 * Harpoon2A4 also assumes at most 2 data bytes per 3201 * negotiated REQ/ACK offset. Paced transfers take 3202 * 4, so we must adjust our offset. 3203 */ 3204 ppr_opts |= PPROPT_PACE; 3205 offset *= 2; 3206 3207 /* 3208 * Harpoon2A assumed that there would be a 3209 * fallback rate between 160MHz and 80Mhz, 3210 * so 7 is used as the period factor rather 3211 * than 8 for 160MHz. 3212 */ 3213 period = AHD_SYNCRATE_REVA_160; 3214 } 3215 if ((tinfo->ppr_options & MSG_EXT_PPR_PCOMP_EN) == 0) 3216 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= 3217 ~AHD_PRECOMP_MASK; 3218 } else { 3219 /* 3220 * Precomp should be disabled for non-paced transfers. 3221 */ 3222 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_PRECOMP_MASK; 3223 3224 if ((ahd->features & AHD_NEW_IOCELL_OPTS) != 0 3225 && (ppr_opts & MSG_EXT_PPR_DT_REQ) != 0) { 3226 /* 3227 * Slow down our CRC interval to be 3228 * compatible with devices that can't 3229 * handle a CRC at full speed. 3230 */ 3231 con_opts |= ENSLOWCRC; 3232 } 3233 } 3234 3235 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PRECOMP_SLEW); 3236 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_PRECOMP_SLEW_INDEX]); 3237 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_AMPLITUDE); 3238 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_AMPLITUDE_INDEX]); 3239 3240 ahd_outb(ahd, NEGPERIOD, period); 3241 ahd_outb(ahd, NEGPPROPTS, ppr_opts); 3242 ahd_outb(ahd, NEGOFFSET, offset); 3243 3244 if (tinfo->width == MSG_EXT_WDTR_BUS_16_BIT) 3245 con_opts |= WIDEXFER; 3246 3247 /* 3248 * During packetized transfers, the target will 3249 * give us the opportunity to send command packets 3250 * without us asserting attention. 3251 */ 3252 if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0) 3253 con_opts |= ENAUTOATNO; 3254 ahd_outb(ahd, NEGCONOPTS, con_opts); 3255 ahd_outb(ahd, NEGOADDR, saved_negoaddr); 3256 ahd_restore_modes(ahd, saved_modes); 3257 } 3258 3259 /* 3260 * When the transfer settings for a connection change, setup for 3261 * negotiation in pending SCBs to effect the change as quickly as 3262 * possible. We also cancel any negotiations that are scheduled 3263 * for inflight SCBs that have not been started yet. 3264 */ 3265 static void 3266 ahd_update_pending_scbs(struct ahd_softc *ahd) 3267 { 3268 struct scb *pending_scb; 3269 int pending_scb_count; 3270 u_int scb_tag; 3271 int paused; 3272 u_int saved_scbptr; 3273 ahd_mode_state saved_modes; 3274 3275 /* 3276 * Traverse the pending SCB list and ensure that all of the 3277 * SCBs there have the proper settings. We can only safely 3278 * clear the negotiation required flag (setting requires the 3279 * execution queue to be modified) and this is only possible 3280 * if we are not already attempting to select out for this 3281 * SCB. For this reason, all callers only call this routine 3282 * if we are changing the negotiation settings for the currently 3283 * active transaction on the bus. 3284 */ 3285 pending_scb_count = 0; 3286 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) { 3287 struct ahd_devinfo devinfo; 3288 struct hardware_scb *pending_hscb; 3289 struct ahd_initiator_tinfo *tinfo; 3290 struct ahd_tmode_tstate *tstate; 3291 3292 ahd_scb_devinfo(ahd, &devinfo, pending_scb); 3293 tinfo = ahd_fetch_transinfo(ahd, devinfo.channel, 3294 devinfo.our_scsiid, 3295 devinfo.target, &tstate); 3296 pending_hscb = pending_scb->hscb; 3297 if ((tstate->auto_negotiate & devinfo.target_mask) == 0 3298 && (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) { 3299 pending_scb->flags &= ~SCB_AUTO_NEGOTIATE; 3300 pending_hscb->control &= ~MK_MESSAGE; 3301 } 3302 ahd_sync_scb(ahd, pending_scb, 3303 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 3304 pending_scb_count++; 3305 } 3306 3307 if (pending_scb_count == 0) 3308 return; 3309 3310 if (ahd_is_paused(ahd)) { 3311 paused = 1; 3312 } else { 3313 paused = 0; 3314 ahd_pause(ahd); 3315 } 3316 3317 /* 3318 * Force the sequencer to reinitialize the selection for 3319 * the command at the head of the execution queue if it 3320 * has already been setup. The negotiation changes may 3321 * effect whether we select-out with ATN. 3322 */ 3323 saved_modes = ahd_save_modes(ahd); 3324 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3325 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 3326 saved_scbptr = ahd_get_scbptr(ahd); 3327 /* Ensure that the hscbs down on the card match the new information */ 3328 for (scb_tag = 0; scb_tag < ahd->scb_data.maxhscbs; scb_tag++) { 3329 struct hardware_scb *pending_hscb; 3330 u_int control; 3331 3332 pending_scb = ahd_lookup_scb(ahd, scb_tag); 3333 if (pending_scb == NULL) 3334 continue; 3335 ahd_set_scbptr(ahd, scb_tag); 3336 pending_hscb = pending_scb->hscb; 3337 control = ahd_inb_scbram(ahd, SCB_CONTROL); 3338 control &= ~MK_MESSAGE; 3339 control |= pending_hscb->control & MK_MESSAGE; 3340 ahd_outb(ahd, SCB_CONTROL, control); 3341 } 3342 ahd_set_scbptr(ahd, saved_scbptr); 3343 ahd_restore_modes(ahd, saved_modes); 3344 3345 if (paused == 0) 3346 ahd_unpause(ahd); 3347 } 3348 3349 /**************************** Pathing Information *****************************/ 3350 static void 3351 ahd_fetch_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3352 { 3353 ahd_mode_state saved_modes; 3354 u_int saved_scsiid; 3355 role_t role; 3356 int our_id; 3357 3358 saved_modes = ahd_save_modes(ahd); 3359 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3360 3361 if (ahd_inb(ahd, SSTAT0) & TARGET) 3362 role = ROLE_TARGET; 3363 else 3364 role = ROLE_INITIATOR; 3365 3366 if (role == ROLE_TARGET 3367 && (ahd_inb(ahd, SEQ_FLAGS) & CMDPHASE_PENDING) != 0) { 3368 /* We were selected, so pull our id from TARGIDIN */ 3369 our_id = ahd_inb(ahd, TARGIDIN) & OID; 3370 } else if (role == ROLE_TARGET) 3371 our_id = ahd_inb(ahd, TOWNID); 3372 else 3373 our_id = ahd_inb(ahd, IOWNID); 3374 3375 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID); 3376 ahd_compile_devinfo(devinfo, 3377 our_id, 3378 SCSIID_TARGET(ahd, saved_scsiid), 3379 ahd_inb(ahd, SAVED_LUN), 3380 SCSIID_CHANNEL(ahd, saved_scsiid), 3381 role); 3382 ahd_restore_modes(ahd, saved_modes); 3383 } 3384 3385 void 3386 ahd_print_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3387 { 3388 printf("%s:%c:%d:%d: (0x%x) ", ahd_name(ahd), 'A', 3389 devinfo->target, devinfo->lun, ahd_get_scbptr(ahd)); 3390 } 3391 3392 struct ahd_phase_table_entry* 3393 ahd_lookup_phase_entry(int phase) 3394 { 3395 struct ahd_phase_table_entry *entry; 3396 struct ahd_phase_table_entry *last_entry; 3397 3398 /* 3399 * num_phases doesn't include the default entry which 3400 * will be returned if the phase doesn't match. 3401 */ 3402 last_entry = &ahd_phase_table[num_phases]; 3403 for (entry = ahd_phase_table; entry < last_entry; entry++) { 3404 if (phase == entry->phase) 3405 break; 3406 } 3407 return (entry); 3408 } 3409 3410 void 3411 ahd_compile_devinfo(struct ahd_devinfo *devinfo, u_int our_id, u_int target, 3412 u_int lun, char channel, role_t role) 3413 { 3414 devinfo->our_scsiid = our_id; 3415 devinfo->target = target; 3416 devinfo->lun = lun; 3417 devinfo->target_offset = target; 3418 devinfo->channel = channel; 3419 devinfo->role = role; 3420 if (channel == 'B') 3421 devinfo->target_offset += 8; 3422 devinfo->target_mask = (0x01 << devinfo->target_offset); 3423 } 3424 3425 static void 3426 ahd_scb_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3427 struct scb *scb) 3428 { 3429 role_t role; 3430 int our_id; 3431 3432 our_id = SCSIID_OUR_ID(scb->hscb->scsiid); 3433 role = ROLE_INITIATOR; 3434 if ((scb->hscb->control & TARGET_SCB) != 0) 3435 role = ROLE_TARGET; 3436 ahd_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahd, scb), 3437 SCB_GET_LUN(scb), SCB_GET_CHANNEL(ahd, scb), role); 3438 } 3439 3440 3441 /************************ Message Phase Processing ****************************/ 3442 /* 3443 * When an initiator transaction with the MK_MESSAGE flag either reconnects 3444 * or enters the initial message out phase, we are interrupted. Fill our 3445 * outgoing message buffer with the appropriate message and begin handing 3446 * the message phase(s) manually. 3447 */ 3448 static void 3449 ahd_setup_initiator_msgout(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3450 struct scb *scb) 3451 { 3452 /* 3453 * To facilitate adding multiple messages together, 3454 * each routine should increment the index and len 3455 * variables instead of setting them explicitly. 3456 */ 3457 ahd->msgout_index = 0; 3458 ahd->msgout_len = 0; 3459 3460 if (ahd_currently_packetized(ahd)) 3461 ahd->msg_flags |= MSG_FLAG_PACKETIZED; 3462 3463 if (ahd->send_msg_perror 3464 && ahd_inb(ahd, MSG_OUT) == HOST_MSG) { 3465 ahd->msgout_buf[ahd->msgout_index++] = ahd->send_msg_perror; 3466 ahd->msgout_len++; 3467 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3468 #ifdef AHD_DEBUG 3469 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3470 printf("Setting up for Parity Error delivery\n"); 3471 #endif 3472 return; 3473 } else if (scb == NULL) { 3474 printf("%s: WARNING. No pending message for " 3475 "I_T msgin. Issuing NO-OP\n", ahd_name(ahd)); 3476 ahd->msgout_buf[ahd->msgout_index++] = MSG_NOOP; 3477 ahd->msgout_len++; 3478 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3479 return; 3480 } 3481 3482 if ((scb->flags & SCB_DEVICE_RESET) == 0 3483 && (scb->flags & SCB_PACKETIZED) == 0 3484 && ahd_inb(ahd, MSG_OUT) == MSG_IDENTIFYFLAG) { 3485 u_int identify_msg; 3486 3487 identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb); 3488 if ((scb->hscb->control & DISCENB) != 0) 3489 identify_msg |= MSG_IDENTIFY_DISCFLAG; 3490 ahd->msgout_buf[ahd->msgout_index++] = identify_msg; 3491 ahd->msgout_len++; 3492 3493 if ((scb->hscb->control & TAG_ENB) != 0) { 3494 ahd->msgout_buf[ahd->msgout_index++] = 3495 scb->hscb->control & (TAG_ENB|SCB_TAG_TYPE); 3496 ahd->msgout_buf[ahd->msgout_index++] = SCB_GET_TAG(scb); 3497 ahd->msgout_len += 2; 3498 } 3499 } 3500 3501 if (scb->flags & SCB_DEVICE_RESET) { 3502 ahd->msgout_buf[ahd->msgout_index++] = MSG_BUS_DEV_RESET; 3503 ahd->msgout_len++; 3504 ahd_print_path(ahd, scb); 3505 printf("Bus Device Reset Message Sent\n"); 3506 /* 3507 * Clear our selection hardware in advance of 3508 * the busfree. We may have an entry in the waiting 3509 * Q for this target, and we don't want to go about 3510 * selecting while we handle the busfree and blow it 3511 * away. 3512 */ 3513 ahd_outb(ahd, SCSISEQ0, 0); 3514 } else if ((scb->flags & SCB_ABORT) != 0) { 3515 3516 if ((scb->hscb->control & TAG_ENB) != 0) { 3517 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT_TAG; 3518 } else { 3519 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT; 3520 } 3521 ahd->msgout_len++; 3522 ahd_print_path(ahd, scb); 3523 printf("Abort%s Message Sent\n", 3524 (scb->hscb->control & TAG_ENB) != 0 ? " Tag" : ""); 3525 /* 3526 * Clear our selection hardware in advance of 3527 * the busfree. We may have an entry in the waiting 3528 * Q for this target, and we don't want to go about 3529 * selecting while we handle the busfree and blow it 3530 * away. 3531 */ 3532 ahd_outb(ahd, SCSISEQ0, 0); 3533 } else if ((scb->flags & (SCB_AUTO_NEGOTIATE|SCB_NEGOTIATE)) != 0) { 3534 ahd_build_transfer_msg(ahd, devinfo); 3535 /* 3536 * Clear our selection hardware in advance of potential 3537 * PPR IU status change busfree. We may have an entry in 3538 * the waiting Q for this target, and we don't want to go 3539 * about selecting while we handle the busfree and blow 3540 * it away. 3541 */ 3542 ahd_outb(ahd, SCSISEQ0, 0); 3543 } else { 3544 printf("ahd_intr: AWAITING_MSG for an SCB that " 3545 "does not have a waiting message\n"); 3546 printf("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid, 3547 devinfo->target_mask); 3548 panic("SCB = %d, SCB Control = %x:%x, MSG_OUT = %x " 3549 "SCB flags = %x", SCB_GET_TAG(scb), scb->hscb->control, 3550 ahd_inb_scbram(ahd, SCB_CONTROL), ahd_inb(ahd, MSG_OUT), 3551 scb->flags); 3552 } 3553 3554 /* 3555 * Clear the MK_MESSAGE flag from the SCB so we aren't 3556 * asked to send this message again. 3557 */ 3558 ahd_outb(ahd, SCB_CONTROL, 3559 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE); 3560 scb->hscb->control &= ~MK_MESSAGE; 3561 ahd->msgout_index = 0; 3562 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3563 } 3564 3565 /* 3566 * Build an appropriate transfer negotiation message for the 3567 * currently active target. 3568 */ 3569 static void 3570 ahd_build_transfer_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3571 { 3572 /* 3573 * We need to initiate transfer negotiations. 3574 * If our current and goal settings are identical, 3575 * we want to renegotiate due to a check condition. 3576 */ 3577 struct ahd_initiator_tinfo *tinfo; 3578 struct ahd_tmode_tstate *tstate; 3579 int dowide; 3580 int dosync; 3581 int doppr; 3582 u_int period; 3583 u_int ppr_options; 3584 u_int offset; 3585 3586 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 3587 devinfo->target, &tstate); 3588 /* 3589 * Filter our period based on the current connection. 3590 * If we can't perform DT transfers on this segment (not in LVD 3591 * mode for instance), then our decision to issue a PPR message 3592 * may change. 3593 */ 3594 period = tinfo->goal.period; 3595 offset = tinfo->goal.offset; 3596 ppr_options = tinfo->goal.ppr_options; 3597 /* Target initiated PPR is not allowed in the SCSI spec */ 3598 if (devinfo->role == ROLE_TARGET) 3599 ppr_options = 0; 3600 ahd_devlimited_syncrate(ahd, tinfo, &period, 3601 &ppr_options, devinfo->role); 3602 dowide = tinfo->curr.width != tinfo->goal.width; 3603 dosync = tinfo->curr.offset != offset || tinfo->curr.period != period; 3604 /* 3605 * Only use PPR if we have options that need it, even if the device 3606 * claims to support it. There might be an expander in the way 3607 * that doesn't. 3608 */ 3609 doppr = ppr_options != 0; 3610 3611 if (!dowide && !dosync && !doppr) { 3612 dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT; 3613 dosync = tinfo->goal.offset != 0; 3614 } 3615 3616 if (!dowide && !dosync && !doppr) { 3617 /* 3618 * Force async with a WDTR message if we have a wide bus, 3619 * or just issue an SDTR with a 0 offset. 3620 */ 3621 if ((ahd->features & AHD_WIDE) != 0) 3622 dowide = 1; 3623 else 3624 dosync = 1; 3625 3626 if (bootverbose) { 3627 ahd_print_devinfo(ahd, devinfo); 3628 printf("Ensuring async\n"); 3629 } 3630 } 3631 /* Target initiated PPR is not allowed in the SCSI spec */ 3632 if (devinfo->role == ROLE_TARGET) 3633 doppr = 0; 3634 3635 /* 3636 * Both the PPR message and SDTR message require the 3637 * goal syncrate to be limited to what the target device 3638 * is capable of handling (based on whether an LVD->SE 3639 * expander is on the bus), so combine these two cases. 3640 * Regardless, guarantee that if we are using WDTR and SDTR 3641 * messages that WDTR comes first. 3642 */ 3643 if (doppr || (dosync && !dowide)) { 3644 3645 offset = tinfo->goal.offset; 3646 ahd_validate_offset(ahd, tinfo, period, &offset, 3647 doppr ? tinfo->goal.width 3648 : tinfo->curr.width, 3649 devinfo->role); 3650 if (doppr) { 3651 ahd_construct_ppr(ahd, devinfo, period, offset, 3652 tinfo->goal.width, ppr_options); 3653 } else { 3654 ahd_construct_sdtr(ahd, devinfo, period, offset); 3655 } 3656 } else { 3657 ahd_construct_wdtr(ahd, devinfo, tinfo->goal.width); 3658 } 3659 } 3660 3661 /* 3662 * Build a synchronous negotiation message in our message 3663 * buffer based on the input parameters. 3664 */ 3665 static void 3666 ahd_construct_sdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3667 u_int period, u_int offset) 3668 { 3669 if (offset == 0) 3670 period = AHD_ASYNC_XFER_PERIOD; 3671 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3672 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_SDTR_LEN; 3673 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_SDTR; 3674 ahd->msgout_buf[ahd->msgout_index++] = period; 3675 ahd->msgout_buf[ahd->msgout_index++] = offset; 3676 ahd->msgout_len += 5; 3677 if (bootverbose) { 3678 printf("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n", 3679 ahd_name(ahd), devinfo->channel, devinfo->target, 3680 devinfo->lun, period, offset); 3681 } 3682 } 3683 3684 /* 3685 * Build a wide negotiation message in our message 3686 * buffer based on the input parameters. 3687 */ 3688 static void 3689 ahd_construct_wdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3690 u_int bus_width) 3691 { 3692 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3693 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_WDTR_LEN; 3694 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_WDTR; 3695 ahd->msgout_buf[ahd->msgout_index++] = bus_width; 3696 ahd->msgout_len += 4; 3697 if (bootverbose) { 3698 printf("(%s:%c:%d:%d): Sending WDTR %x\n", 3699 ahd_name(ahd), devinfo->channel, devinfo->target, 3700 devinfo->lun, bus_width); 3701 } 3702 } 3703 3704 /* 3705 * Build a parallel protocol request message in our message 3706 * buffer based on the input parameters. 3707 */ 3708 static void 3709 ahd_construct_ppr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3710 u_int period, u_int offset, u_int bus_width, 3711 u_int ppr_options) 3712 { 3713 /* 3714 * Always request precompensation from 3715 * the other target if we are running 3716 * at paced syncrates. 3717 */ 3718 if (period <= AHD_SYNCRATE_PACED) 3719 ppr_options |= MSG_EXT_PPR_PCOMP_EN; 3720 if (offset == 0) 3721 period = AHD_ASYNC_XFER_PERIOD; 3722 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3723 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_PPR_LEN; 3724 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_PPR; 3725 ahd->msgout_buf[ahd->msgout_index++] = period; 3726 ahd->msgout_buf[ahd->msgout_index++] = 0; 3727 ahd->msgout_buf[ahd->msgout_index++] = offset; 3728 ahd->msgout_buf[ahd->msgout_index++] = bus_width; 3729 ahd->msgout_buf[ahd->msgout_index++] = ppr_options; 3730 ahd->msgout_len += 8; 3731 if (bootverbose) { 3732 printf("(%s:%c:%d:%d): Sending PPR bus_width %x, period 0x%x, " 3733 "offset 0x%x, ppr_options 0x%x\n", ahd_name(ahd), 3734 devinfo->channel, devinfo->target, devinfo->lun, 3735 bus_width, period, offset, ppr_options); 3736 } 3737 } 3738 3739 /* 3740 * Clear any active message state. 3741 */ 3742 static void 3743 ahd_clear_msg_state(struct ahd_softc *ahd) 3744 { 3745 ahd_mode_state saved_modes; 3746 3747 saved_modes = ahd_save_modes(ahd); 3748 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3749 ahd->send_msg_perror = 0; 3750 ahd->msg_flags = MSG_FLAG_NONE; 3751 ahd->msgout_len = 0; 3752 ahd->msgin_index = 0; 3753 ahd->msg_type = MSG_TYPE_NONE; 3754 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0) { 3755 /* 3756 * The target didn't care to respond to our 3757 * message request, so clear ATN. 3758 */ 3759 ahd_outb(ahd, CLRSINT1, CLRATNO); 3760 } 3761 ahd_outb(ahd, MSG_OUT, MSG_NOOP); 3762 ahd_outb(ahd, SEQ_FLAGS2, 3763 ahd_inb(ahd, SEQ_FLAGS2) & ~TARGET_MSG_PENDING); 3764 ahd_restore_modes(ahd, saved_modes); 3765 } 3766 3767 /* 3768 * Manual message loop handler. 3769 */ 3770 static void 3771 ahd_handle_message_phase(struct ahd_softc *ahd) 3772 { 3773 struct ahd_devinfo devinfo; 3774 u_int bus_phase; 3775 int end_session; 3776 3777 ahd_fetch_devinfo(ahd, &devinfo); 3778 end_session = FALSE; 3779 bus_phase = ahd_inb(ahd, LASTPHASE); 3780 3781 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0) { 3782 printf("LQIRETRY for LQIPHASE_OUTPKT\n"); 3783 ahd_outb(ahd, LQCTL2, LQIRETRY); 3784 } 3785 reswitch: 3786 switch (ahd->msg_type) { 3787 case MSG_TYPE_INITIATOR_MSGOUT: 3788 { 3789 int lastbyte; 3790 int phasemis; 3791 int msgdone; 3792 3793 if (ahd->msgout_len == 0 && ahd->send_msg_perror == 0) 3794 panic("HOST_MSG_LOOP interrupt with no active message"); 3795 3796 #ifdef AHD_DEBUG 3797 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3798 ahd_print_devinfo(ahd, &devinfo); 3799 printf("INITIATOR_MSG_OUT"); 3800 } 3801 #endif 3802 phasemis = bus_phase != P_MESGOUT; 3803 if (phasemis) { 3804 #ifdef AHD_DEBUG 3805 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3806 printf(" PHASEMIS %s\n", 3807 ahd_lookup_phase_entry(bus_phase) 3808 ->phasemsg); 3809 } 3810 #endif 3811 if (bus_phase == P_MESGIN) { 3812 /* 3813 * Change gears and see if 3814 * this messages is of interest to 3815 * us or should be passed back to 3816 * the sequencer. 3817 */ 3818 ahd_outb(ahd, CLRSINT1, CLRATNO); 3819 ahd->send_msg_perror = 0; 3820 ahd->msg_type = MSG_TYPE_INITIATOR_MSGIN; 3821 ahd->msgin_index = 0; 3822 goto reswitch; 3823 } 3824 end_session = TRUE; 3825 break; 3826 } 3827 3828 if (ahd->send_msg_perror) { 3829 ahd_outb(ahd, CLRSINT1, CLRATNO); 3830 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 3831 #ifdef AHD_DEBUG 3832 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3833 printf(" byte 0x%x\n", ahd->send_msg_perror); 3834 #endif 3835 /* 3836 * If we are notifying the target of a CRC error 3837 * during packetized operations, the target is 3838 * within its rights to acknowledge our message 3839 * with a busfree. 3840 */ 3841 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0 3842 && ahd->send_msg_perror == MSG_INITIATOR_DET_ERR) 3843 ahd->msg_flags |= MSG_FLAG_EXPECT_IDE_BUSFREE; 3844 3845 ahd_outb(ahd, RETURN_2, ahd->send_msg_perror); 3846 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE); 3847 break; 3848 } 3849 3850 msgdone = ahd->msgout_index == ahd->msgout_len; 3851 if (msgdone) { 3852 /* 3853 * The target has requested a retry. 3854 * Re-assert ATN, reset our message index to 3855 * 0, and try again. 3856 */ 3857 ahd->msgout_index = 0; 3858 ahd_assert_atn(ahd); 3859 } 3860 3861 lastbyte = ahd->msgout_index == (ahd->msgout_len - 1); 3862 if (lastbyte) { 3863 /* Last byte is signified by dropping ATN */ 3864 ahd_outb(ahd, CLRSINT1, CLRATNO); 3865 } 3866 3867 /* 3868 * Clear our interrupt status and present 3869 * the next byte on the bus. 3870 */ 3871 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 3872 #ifdef AHD_DEBUG 3873 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3874 printf(" byte 0x%x\n", 3875 ahd->msgout_buf[ahd->msgout_index]); 3876 #endif 3877 ahd_outb(ahd, RETURN_2, ahd->msgout_buf[ahd->msgout_index++]); 3878 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE); 3879 break; 3880 } 3881 case MSG_TYPE_INITIATOR_MSGIN: 3882 { 3883 int phasemis; 3884 int message_done; 3885 3886 #ifdef AHD_DEBUG 3887 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3888 ahd_print_devinfo(ahd, &devinfo); 3889 printf("INITIATOR_MSG_IN"); 3890 } 3891 #endif 3892 phasemis = bus_phase != P_MESGIN; 3893 if (phasemis) { 3894 #ifdef AHD_DEBUG 3895 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3896 printf(" PHASEMIS %s\n", 3897 ahd_lookup_phase_entry(bus_phase) 3898 ->phasemsg); 3899 } 3900 #endif 3901 ahd->msgin_index = 0; 3902 if (bus_phase == P_MESGOUT 3903 && (ahd->send_msg_perror != 0 3904 || (ahd->msgout_len != 0 3905 && ahd->msgout_index == 0))) { 3906 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3907 goto reswitch; 3908 } 3909 end_session = TRUE; 3910 break; 3911 } 3912 3913 /* Pull the byte in without acking it */ 3914 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIBUS); 3915 #ifdef AHD_DEBUG 3916 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3917 printf(" byte 0x%x\n", 3918 ahd->msgin_buf[ahd->msgin_index]); 3919 #endif 3920 3921 message_done = ahd_parse_msg(ahd, &devinfo); 3922 3923 if (message_done) { 3924 /* 3925 * Clear our incoming message buffer in case there 3926 * is another message following this one. 3927 */ 3928 ahd->msgin_index = 0; 3929 3930 /* 3931 * If this message illicited a response, 3932 * assert ATN so the target takes us to the 3933 * message out phase. 3934 */ 3935 if (ahd->msgout_len != 0) { 3936 #ifdef AHD_DEBUG 3937 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3938 ahd_print_devinfo(ahd, &devinfo); 3939 printf("Asserting ATN for response\n"); 3940 } 3941 #endif 3942 ahd_assert_atn(ahd); 3943 } 3944 } else 3945 ahd->msgin_index++; 3946 3947 if (message_done == MSGLOOP_TERMINATED) { 3948 end_session = TRUE; 3949 } else { 3950 /* Ack the byte */ 3951 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 3952 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_READ); 3953 } 3954 break; 3955 } 3956 case MSG_TYPE_TARGET_MSGIN: 3957 { 3958 int msgdone; 3959 int msgout_request; 3960 3961 /* 3962 * By default, the message loop will continue. 3963 */ 3964 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG); 3965 3966 if (ahd->msgout_len == 0) 3967 panic("Target MSGIN with no active message"); 3968 3969 /* 3970 * If we interrupted a mesgout session, the initiator 3971 * will not know this until our first REQ. So, we 3972 * only honor mesgout requests after we've sent our 3973 * first byte. 3974 */ 3975 if ((ahd_inb(ahd, SCSISIGI) & ATNI) != 0 3976 && ahd->msgout_index > 0) 3977 msgout_request = TRUE; 3978 else 3979 msgout_request = FALSE; 3980 3981 if (msgout_request) { 3982 3983 /* 3984 * Change gears and see if 3985 * this messages is of interest to 3986 * us or should be passed back to 3987 * the sequencer. 3988 */ 3989 ahd->msg_type = MSG_TYPE_TARGET_MSGOUT; 3990 ahd_outb(ahd, SCSISIGO, P_MESGOUT | BSYO); 3991 ahd->msgin_index = 0; 3992 /* Dummy read to REQ for first byte */ 3993 ahd_inb(ahd, SCSIDAT); 3994 ahd_outb(ahd, SXFRCTL0, 3995 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 3996 break; 3997 } 3998 3999 msgdone = ahd->msgout_index == ahd->msgout_len; 4000 if (msgdone) { 4001 ahd_outb(ahd, SXFRCTL0, 4002 ahd_inb(ahd, SXFRCTL0) & ~SPIOEN); 4003 end_session = TRUE; 4004 break; 4005 } 4006 4007 /* 4008 * Present the next byte on the bus. 4009 */ 4010 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4011 ahd_outb(ahd, SCSIDAT, ahd->msgout_buf[ahd->msgout_index++]); 4012 break; 4013 } 4014 case MSG_TYPE_TARGET_MSGOUT: 4015 { 4016 int lastbyte; 4017 int msgdone; 4018 4019 /* 4020 * By default, the message loop will continue. 4021 */ 4022 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG); 4023 4024 /* 4025 * The initiator signals that this is 4026 * the last byte by dropping ATN. 4027 */ 4028 lastbyte = (ahd_inb(ahd, SCSISIGI) & ATNI) == 0; 4029 4030 /* 4031 * Read the latched byte, but turn off SPIOEN first 4032 * so that we don't inadvertently cause a REQ for the 4033 * next byte. 4034 */ 4035 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) & ~SPIOEN); 4036 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIDAT); 4037 msgdone = ahd_parse_msg(ahd, &devinfo); 4038 if (msgdone == MSGLOOP_TERMINATED) { 4039 /* 4040 * The message is *really* done in that it caused 4041 * us to go to bus free. The sequencer has already 4042 * been reset at this point, so pull the ejection 4043 * handle. 4044 */ 4045 return; 4046 } 4047 4048 ahd->msgin_index++; 4049 4050 /* 4051 * XXX Read spec about initiator dropping ATN too soon 4052 * and use msgdone to detect it. 4053 */ 4054 if (msgdone == MSGLOOP_MSGCOMPLETE) { 4055 ahd->msgin_index = 0; 4056 4057 /* 4058 * If this message illicited a response, transition 4059 * to the Message in phase and send it. 4060 */ 4061 if (ahd->msgout_len != 0) { 4062 ahd_outb(ahd, SCSISIGO, P_MESGIN | BSYO); 4063 ahd_outb(ahd, SXFRCTL0, 4064 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4065 ahd->msg_type = MSG_TYPE_TARGET_MSGIN; 4066 ahd->msgin_index = 0; 4067 break; 4068 } 4069 } 4070 4071 if (lastbyte) 4072 end_session = TRUE; 4073 else { 4074 /* Ask for the next byte. */ 4075 ahd_outb(ahd, SXFRCTL0, 4076 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4077 } 4078 4079 break; 4080 } 4081 default: 4082 panic("Unknown REQINIT message type"); 4083 } 4084 4085 if (end_session) { 4086 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0) { 4087 printf("%s: Returning to Idle Loop\n", 4088 ahd_name(ahd)); 4089 ahd_clear_msg_state(ahd); 4090 4091 /* 4092 * Perform the equivalent of a clear_target_state. 4093 */ 4094 ahd_outb(ahd, LASTPHASE, P_BUSFREE); 4095 ahd_outb(ahd, SEQ_FLAGS, NOT_IDENTIFIED|NO_CDB_SENT); 4096 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET); 4097 } else { 4098 ahd_clear_msg_state(ahd); 4099 ahd_outb(ahd, RETURN_1, EXIT_MSG_LOOP); 4100 } 4101 } 4102 } 4103 4104 /* 4105 * See if we sent a particular extended message to the target. 4106 * If "full" is true, return true only if the target saw the full 4107 * message. If "full" is false, return true if the target saw at 4108 * least the first byte of the message. 4109 */ 4110 static int 4111 ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, u_int msgval, int full) 4112 { 4113 int found; 4114 u_int index; 4115 4116 found = FALSE; 4117 index = 0; 4118 4119 while (index < ahd->msgout_len) { 4120 if (ahd->msgout_buf[index] == MSG_EXTENDED) { 4121 u_int end_index; 4122 4123 end_index = index + 1 + ahd->msgout_buf[index + 1]; 4124 if (ahd->msgout_buf[index+2] == msgval 4125 && type == AHDMSG_EXT) { 4126 4127 if (full) { 4128 if (ahd->msgout_index > end_index) 4129 found = TRUE; 4130 } else if (ahd->msgout_index > index) 4131 found = TRUE; 4132 } 4133 index = end_index; 4134 } else if (ahd->msgout_buf[index] >= MSG_SIMPLE_TASK 4135 && ahd->msgout_buf[index] <= MSG_IGN_WIDE_RESIDUE) { 4136 4137 /* Skip tag type and tag id or residue param*/ 4138 index += 2; 4139 } else { 4140 /* Single byte message */ 4141 if (type == AHDMSG_1B 4142 && ahd->msgout_index > index 4143 && (ahd->msgout_buf[index] == msgval 4144 || ((ahd->msgout_buf[index] & MSG_IDENTIFYFLAG) != 0 4145 && msgval == MSG_IDENTIFYFLAG))) 4146 found = TRUE; 4147 index++; 4148 } 4149 4150 if (found) 4151 break; 4152 } 4153 return (found); 4154 } 4155 4156 /* 4157 * Wait for a complete incoming message, parse it, and respond accordingly. 4158 */ 4159 static int 4160 ahd_parse_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4161 { 4162 struct ahd_initiator_tinfo *tinfo; 4163 struct ahd_tmode_tstate *tstate; 4164 int reject; 4165 int done; 4166 int response; 4167 4168 done = MSGLOOP_IN_PROG; 4169 response = FALSE; 4170 reject = FALSE; 4171 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 4172 devinfo->target, &tstate); 4173 4174 /* 4175 * Parse as much of the message as is available, 4176 * rejecting it if we don't support it. When 4177 * the entire message is available and has been 4178 * handled, return MSGLOOP_MSGCOMPLETE, indicating 4179 * that we have parsed an entire message. 4180 * 4181 * In the case of extended messages, we accept the length 4182 * byte outright and perform more checking once we know the 4183 * extended message type. 4184 */ 4185 switch (ahd->msgin_buf[0]) { 4186 case MSG_DISCONNECT: 4187 case MSG_SAVEDATAPOINTER: 4188 case MSG_CMDCOMPLETE: 4189 case MSG_RESTOREPOINTERS: 4190 case MSG_IGN_WIDE_RESIDUE: 4191 /* 4192 * End our message loop as these are messages 4193 * the sequencer handles on its own. 4194 */ 4195 done = MSGLOOP_TERMINATED; 4196 break; 4197 case MSG_MESSAGE_REJECT: 4198 response = ahd_handle_msg_reject(ahd, devinfo); 4199 /* FALLTHROUGH */ 4200 case MSG_NOOP: 4201 done = MSGLOOP_MSGCOMPLETE; 4202 break; 4203 case MSG_EXTENDED: 4204 { 4205 /* Wait for enough of the message to begin validation */ 4206 if (ahd->msgin_index < 2) 4207 break; 4208 switch (ahd->msgin_buf[2]) { 4209 case MSG_EXT_SDTR: 4210 { 4211 u_int period; 4212 u_int ppr_options; 4213 u_int offset; 4214 u_int saved_offset; 4215 4216 if (ahd->msgin_buf[1] != MSG_EXT_SDTR_LEN) { 4217 reject = TRUE; 4218 break; 4219 } 4220 4221 /* 4222 * Wait until we have both args before validating 4223 * and acting on this message. 4224 * 4225 * Add one to MSG_EXT_SDTR_LEN to account for 4226 * the extended message preamble. 4227 */ 4228 if (ahd->msgin_index < (MSG_EXT_SDTR_LEN + 1)) 4229 break; 4230 4231 period = ahd->msgin_buf[3]; 4232 ppr_options = 0; 4233 saved_offset = offset = ahd->msgin_buf[4]; 4234 ahd_devlimited_syncrate(ahd, tinfo, &period, 4235 &ppr_options, devinfo->role); 4236 ahd_validate_offset(ahd, tinfo, period, &offset, 4237 tinfo->curr.width, devinfo->role); 4238 if (bootverbose) { 4239 printf("(%s:%c:%d:%d): Received " 4240 "SDTR period %x, offset %x\n\t" 4241 "Filtered to period %x, offset %x\n", 4242 ahd_name(ahd), devinfo->channel, 4243 devinfo->target, devinfo->lun, 4244 ahd->msgin_buf[3], saved_offset, 4245 period, offset); 4246 } 4247 ahd_set_syncrate(ahd, devinfo, period, 4248 offset, ppr_options, 4249 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4250 /*paused*/TRUE); 4251 4252 /* 4253 * See if we initiated Sync Negotiation 4254 * and didn't have to fall down to async 4255 * transfers. 4256 */ 4257 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, TRUE)) { 4258 /* We started it */ 4259 if (saved_offset != offset) { 4260 /* Went too low - force async */ 4261 reject = TRUE; 4262 } 4263 } else { 4264 /* 4265 * Send our own SDTR in reply 4266 */ 4267 if (bootverbose 4268 && devinfo->role == ROLE_INITIATOR) { 4269 printf("(%s:%c:%d:%d): Target " 4270 "Initiated SDTR\n", 4271 ahd_name(ahd), devinfo->channel, 4272 devinfo->target, devinfo->lun); 4273 } 4274 ahd->msgout_index = 0; 4275 ahd->msgout_len = 0; 4276 ahd_construct_sdtr(ahd, devinfo, 4277 period, offset); 4278 ahd->msgout_index = 0; 4279 response = TRUE; 4280 } 4281 done = MSGLOOP_MSGCOMPLETE; 4282 break; 4283 } 4284 case MSG_EXT_WDTR: 4285 { 4286 u_int bus_width; 4287 u_int saved_width; 4288 u_int sending_reply; 4289 4290 sending_reply = FALSE; 4291 if (ahd->msgin_buf[1] != MSG_EXT_WDTR_LEN) { 4292 reject = TRUE; 4293 break; 4294 } 4295 4296 /* 4297 * Wait until we have our arg before validating 4298 * and acting on this message. 4299 * 4300 * Add one to MSG_EXT_WDTR_LEN to account for 4301 * the extended message preamble. 4302 */ 4303 if (ahd->msgin_index < (MSG_EXT_WDTR_LEN + 1)) 4304 break; 4305 4306 bus_width = ahd->msgin_buf[3]; 4307 saved_width = bus_width; 4308 ahd_validate_width(ahd, tinfo, &bus_width, 4309 devinfo->role); 4310 if (bootverbose) { 4311 printf("(%s:%c:%d:%d): Received WDTR " 4312 "%x filtered to %x\n", 4313 ahd_name(ahd), devinfo->channel, 4314 devinfo->target, devinfo->lun, 4315 saved_width, bus_width); 4316 } 4317 4318 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, TRUE)) { 4319 /* 4320 * Don't send a WDTR back to the 4321 * target, since we asked first. 4322 * If the width went higher than our 4323 * request, reject it. 4324 */ 4325 if (saved_width > bus_width) { 4326 reject = TRUE; 4327 printf("(%s:%c:%d:%d): requested %dBit " 4328 "transfers. Rejecting...\n", 4329 ahd_name(ahd), devinfo->channel, 4330 devinfo->target, devinfo->lun, 4331 8 * (0x01 << bus_width)); 4332 bus_width = 0; 4333 } 4334 } else { 4335 /* 4336 * Send our own WDTR in reply 4337 */ 4338 if (bootverbose 4339 && devinfo->role == ROLE_INITIATOR) { 4340 printf("(%s:%c:%d:%d): Target " 4341 "Initiated WDTR\n", 4342 ahd_name(ahd), devinfo->channel, 4343 devinfo->target, devinfo->lun); 4344 } 4345 ahd->msgout_index = 0; 4346 ahd->msgout_len = 0; 4347 ahd_construct_wdtr(ahd, devinfo, bus_width); 4348 ahd->msgout_index = 0; 4349 response = TRUE; 4350 sending_reply = TRUE; 4351 } 4352 /* 4353 * After a wide message, we are async, but 4354 * some devices don't seem to honor this portion 4355 * of the spec. Force a renegotiation of the 4356 * sync component of our transfer agreement even 4357 * if our goal is async. By updating our width 4358 * after forcing the negotiation, we avoid 4359 * renegotiating for width. 4360 */ 4361 ahd_update_neg_request(ahd, devinfo, tstate, 4362 tinfo, AHD_NEG_ALWAYS); 4363 ahd_set_width(ahd, devinfo, bus_width, 4364 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4365 /*paused*/TRUE); 4366 if (sending_reply == FALSE && reject == FALSE) { 4367 4368 /* 4369 * We will always have an SDTR to send. 4370 */ 4371 ahd->msgout_index = 0; 4372 ahd->msgout_len = 0; 4373 ahd_build_transfer_msg(ahd, devinfo); 4374 ahd->msgout_index = 0; 4375 response = TRUE; 4376 } 4377 done = MSGLOOP_MSGCOMPLETE; 4378 break; 4379 } 4380 case MSG_EXT_PPR: 4381 { 4382 u_int period; 4383 u_int offset; 4384 u_int bus_width; 4385 u_int ppr_options; 4386 u_int saved_width; 4387 u_int saved_offset; 4388 u_int saved_ppr_options; 4389 4390 if (ahd->msgin_buf[1] != MSG_EXT_PPR_LEN) { 4391 reject = TRUE; 4392 break; 4393 } 4394 4395 /* 4396 * Wait until we have all args before validating 4397 * and acting on this message. 4398 * 4399 * Add one to MSG_EXT_PPR_LEN to account for 4400 * the extended message preamble. 4401 */ 4402 if (ahd->msgin_index < (MSG_EXT_PPR_LEN + 1)) 4403 break; 4404 4405 period = ahd->msgin_buf[3]; 4406 offset = ahd->msgin_buf[5]; 4407 bus_width = ahd->msgin_buf[6]; 4408 saved_width = bus_width; 4409 ppr_options = ahd->msgin_buf[7]; 4410 /* 4411 * According to the spec, a DT only 4412 * period factor with no DT option 4413 * set implies async. 4414 */ 4415 if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0 4416 && period <= 9) 4417 offset = 0; 4418 saved_ppr_options = ppr_options; 4419 saved_offset = offset; 4420 4421 /* 4422 * Transfer options are only available if we 4423 * are negotiating wide. 4424 */ 4425 if (bus_width == 0) 4426 ppr_options &= MSG_EXT_PPR_QAS_REQ; 4427 4428 ahd_validate_width(ahd, tinfo, &bus_width, 4429 devinfo->role); 4430 ahd_devlimited_syncrate(ahd, tinfo, &period, 4431 &ppr_options, devinfo->role); 4432 ahd_validate_offset(ahd, tinfo, period, &offset, 4433 bus_width, devinfo->role); 4434 4435 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, TRUE)) { 4436 /* 4437 * If we are unable to do any of the 4438 * requested options (we went too low), 4439 * then we'll have to reject the message. 4440 */ 4441 if (saved_width > bus_width 4442 || saved_offset != offset 4443 || saved_ppr_options != ppr_options) { 4444 reject = TRUE; 4445 period = 0; 4446 offset = 0; 4447 bus_width = 0; 4448 ppr_options = 0; 4449 } 4450 } else { 4451 if (devinfo->role != ROLE_TARGET) 4452 printf("(%s:%c:%d:%d): Target " 4453 "Initiated PPR\n", 4454 ahd_name(ahd), devinfo->channel, 4455 devinfo->target, devinfo->lun); 4456 else 4457 printf("(%s:%c:%d:%d): Initiator " 4458 "Initiated PPR\n", 4459 ahd_name(ahd), devinfo->channel, 4460 devinfo->target, devinfo->lun); 4461 ahd->msgout_index = 0; 4462 ahd->msgout_len = 0; 4463 ahd_construct_ppr(ahd, devinfo, period, offset, 4464 bus_width, ppr_options); 4465 ahd->msgout_index = 0; 4466 response = TRUE; 4467 } 4468 if (bootverbose) { 4469 printf("(%s:%c:%d:%d): Received PPR width %x, " 4470 "period %x, offset %x,options %x\n" 4471 "\tFiltered to width %x, period %x, " 4472 "offset %x, options %x\n", 4473 ahd_name(ahd), devinfo->channel, 4474 devinfo->target, devinfo->lun, 4475 saved_width, ahd->msgin_buf[3], 4476 saved_offset, saved_ppr_options, 4477 bus_width, period, offset, ppr_options); 4478 } 4479 ahd_set_width(ahd, devinfo, bus_width, 4480 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4481 /*paused*/TRUE); 4482 ahd_set_syncrate(ahd, devinfo, period, 4483 offset, ppr_options, 4484 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4485 /*paused*/TRUE); 4486 4487 done = MSGLOOP_MSGCOMPLETE; 4488 break; 4489 } 4490 default: 4491 /* Unknown extended message. Reject it. */ 4492 reject = TRUE; 4493 break; 4494 } 4495 break; 4496 } 4497 #ifdef AHD_TARGET_MODE 4498 case MSG_BUS_DEV_RESET: 4499 ahd_handle_devreset(ahd, devinfo, CAM_LUN_WILDCARD, 4500 CAM_BDR_SENT, 4501 "Bus Device Reset Received", 4502 /*verbose_level*/0); 4503 ahd_restart(ahd); 4504 done = MSGLOOP_TERMINATED; 4505 break; 4506 case MSG_ABORT_TAG: 4507 case MSG_ABORT: 4508 case MSG_CLEAR_QUEUE: 4509 { 4510 int tag; 4511 4512 /* Target mode messages */ 4513 if (devinfo->role != ROLE_TARGET) { 4514 reject = TRUE; 4515 break; 4516 } 4517 tag = SCB_LIST_NULL; 4518 if (ahd->msgin_buf[0] == MSG_ABORT_TAG) 4519 tag = ahd_inb(ahd, INITIATOR_TAG); 4520 ahd_abort_scbs(ahd, devinfo->target, devinfo->channel, 4521 devinfo->lun, tag, ROLE_TARGET, 4522 CAM_REQ_ABORTED); 4523 4524 tstate = ahd->enabled_targets[devinfo->our_scsiid]; 4525 if (tstate != NULL) { 4526 struct ahd_tmode_lstate* lstate; 4527 4528 lstate = tstate->enabled_luns[devinfo->lun]; 4529 if (lstate != NULL) { 4530 ahd_queue_lstate_event(ahd, lstate, 4531 devinfo->our_scsiid, 4532 ahd->msgin_buf[0], 4533 /*arg*/tag); 4534 ahd_send_lstate_events(ahd, lstate); 4535 } 4536 } 4537 ahd_restart(ahd); 4538 done = MSGLOOP_TERMINATED; 4539 break; 4540 } 4541 #endif 4542 case MSG_QAS_REQUEST: 4543 #ifdef AHD_DEBUG 4544 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 4545 printf("%s: QAS request. SCSISIGI == 0x%x\n", 4546 ahd_name(ahd), ahd_inb(ahd, SCSISIGI)); 4547 #endif 4548 ahd->msg_flags |= MSG_FLAG_EXPECT_QASREJ_BUSFREE; 4549 /* FALLTHROUGH */ 4550 case MSG_TERM_IO_PROC: 4551 default: 4552 reject = TRUE; 4553 break; 4554 } 4555 4556 if (reject) { 4557 /* 4558 * Setup to reject the message. 4559 */ 4560 ahd->msgout_index = 0; 4561 ahd->msgout_len = 1; 4562 ahd->msgout_buf[0] = MSG_MESSAGE_REJECT; 4563 done = MSGLOOP_MSGCOMPLETE; 4564 response = TRUE; 4565 } 4566 4567 if (done != MSGLOOP_IN_PROG && !response) 4568 /* Clear the outgoing message buffer */ 4569 ahd->msgout_len = 0; 4570 4571 return (done); 4572 } 4573 4574 /* 4575 * Process a message reject message. 4576 */ 4577 static int 4578 ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4579 { 4580 /* 4581 * What we care about here is if we had an 4582 * outstanding SDTR or WDTR message for this 4583 * target. If we did, this is a signal that 4584 * the target is refusing negotiation. 4585 */ 4586 struct scb *scb; 4587 struct ahd_initiator_tinfo *tinfo; 4588 struct ahd_tmode_tstate *tstate; 4589 u_int scb_index; 4590 u_int last_msg; 4591 int response = 0; 4592 4593 scb_index = ahd_get_scbptr(ahd); 4594 scb = ahd_lookup_scb(ahd, scb_index); 4595 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, 4596 devinfo->our_scsiid, 4597 devinfo->target, &tstate); 4598 /* Might be necessary */ 4599 last_msg = ahd_inb(ahd, LAST_MSG); 4600 4601 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/FALSE)) { 4602 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/TRUE) 4603 && tinfo->goal.period <= AHD_SYNCRATE_PACED) { 4604 /* 4605 * Target may not like our SPI-4 PPR Options. 4606 * Attempt to negotiate 80MHz which will turn 4607 * off these options. 4608 */ 4609 if (bootverbose) { 4610 printf("(%s:%c:%d:%d): PPR Rejected. " 4611 "Trying simple U160 PPR\n", 4612 ahd_name(ahd), devinfo->channel, 4613 devinfo->target, devinfo->lun); 4614 } 4615 tinfo->goal.period = AHD_SYNCRATE_DT; 4616 tinfo->goal.ppr_options &= MSG_EXT_PPR_IU_REQ 4617 | MSG_EXT_PPR_QAS_REQ 4618 | MSG_EXT_PPR_DT_REQ; 4619 } else { 4620 /* 4621 * Target does not support the PPR message. 4622 * Attempt to negotiate SPI-2 style. 4623 */ 4624 if (bootverbose) { 4625 printf("(%s:%c:%d:%d): PPR Rejected. " 4626 "Trying WDTR/SDTR\n", 4627 ahd_name(ahd), devinfo->channel, 4628 devinfo->target, devinfo->lun); 4629 } 4630 tinfo->goal.ppr_options = 0; 4631 tinfo->curr.transport_version = 2; 4632 tinfo->goal.transport_version = 2; 4633 } 4634 ahd->msgout_index = 0; 4635 ahd->msgout_len = 0; 4636 ahd_build_transfer_msg(ahd, devinfo); 4637 ahd->msgout_index = 0; 4638 response = 1; 4639 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, /*full*/FALSE)) { 4640 4641 /* note 8bit xfers */ 4642 printf("(%s:%c:%d:%d): refuses WIDE negotiation. Using " 4643 "8bit transfers\n", ahd_name(ahd), 4644 devinfo->channel, devinfo->target, devinfo->lun); 4645 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 4646 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4647 /*paused*/TRUE); 4648 /* 4649 * No need to clear the sync rate. If the target 4650 * did not accept the command, our syncrate is 4651 * unaffected. If the target started the negotiation, 4652 * but rejected our response, we already cleared the 4653 * sync rate before sending our WDTR. 4654 */ 4655 if (tinfo->goal.offset != tinfo->curr.offset) { 4656 4657 /* Start the sync negotiation */ 4658 ahd->msgout_index = 0; 4659 ahd->msgout_len = 0; 4660 ahd_build_transfer_msg(ahd, devinfo); 4661 ahd->msgout_index = 0; 4662 response = 1; 4663 } 4664 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, /*full*/FALSE)) { 4665 /* note asynch xfers and clear flag */ 4666 ahd_set_syncrate(ahd, devinfo, /*period*/0, 4667 /*offset*/0, /*ppr_options*/0, 4668 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4669 /*paused*/TRUE); 4670 printf("(%s:%c:%d:%d): refuses synchronous negotiation. " 4671 "Using asynchronous transfers\n", 4672 ahd_name(ahd), devinfo->channel, 4673 devinfo->target, devinfo->lun); 4674 } else if ((scb->hscb->control & MSG_SIMPLE_TASK) != 0) { 4675 int tag_type; 4676 int mask; 4677 4678 tag_type = (scb->hscb->control & MSG_SIMPLE_TASK); 4679 4680 if (tag_type == MSG_SIMPLE_TASK) { 4681 printf("(%s:%c:%d:%d): refuses tagged commands. " 4682 "Performing non-tagged I/O\n", ahd_name(ahd), 4683 devinfo->channel, devinfo->target, devinfo->lun); 4684 ahd_set_tags(ahd, devinfo, AHD_QUEUE_NONE); 4685 mask = ~0x23; 4686 } else { 4687 printf("(%s:%c:%d:%d): refuses %s tagged commands. " 4688 "Performing simple queue tagged I/O only\n", 4689 ahd_name(ahd), devinfo->channel, devinfo->target, 4690 devinfo->lun, tag_type == MSG_ORDERED_Q_TAG 4691 ? "ordered" : "head of queue"); 4692 ahd_set_tags(ahd, devinfo, AHD_QUEUE_BASIC); 4693 mask = ~0x03; 4694 } 4695 4696 /* 4697 * Resend the identify for this CCB as the target 4698 * may believe that the selection is invalid otherwise. 4699 */ 4700 ahd_outb(ahd, SCB_CONTROL, 4701 ahd_inb_scbram(ahd, SCB_CONTROL) & mask); 4702 scb->hscb->control &= mask; 4703 ahd_set_transaction_tag(scb, /*enabled*/FALSE, 4704 /*type*/MSG_SIMPLE_TASK); 4705 ahd_outb(ahd, MSG_OUT, MSG_IDENTIFYFLAG); 4706 ahd_assert_atn(ahd); 4707 ahd_busy_tcl(ahd, BUILD_TCL(scb->hscb->scsiid, devinfo->lun), 4708 SCB_GET_TAG(scb)); 4709 4710 /* 4711 * Requeue all tagged commands for this target 4712 * currently in our possession so they can be 4713 * converted to untagged commands. 4714 */ 4715 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 4716 SCB_GET_CHANNEL(ahd, scb), 4717 SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL, 4718 ROLE_INITIATOR, CAM_REQUEUE_REQ, 4719 SEARCH_COMPLETE); 4720 } else if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_IDENTIFYFLAG, TRUE)) { 4721 /* 4722 * Most likely the device believes that we had 4723 * previously negotiated packetized. 4724 */ 4725 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE 4726 | MSG_FLAG_IU_REQ_CHANGED; 4727 4728 ahd_force_renegotiation(ahd, devinfo); 4729 ahd->msgout_index = 0; 4730 ahd->msgout_len = 0; 4731 ahd_build_transfer_msg(ahd, devinfo); 4732 ahd->msgout_index = 0; 4733 response = 1; 4734 } else { 4735 /* 4736 * Otherwise, we ignore it. 4737 */ 4738 printf("%s:%c:%d: Message reject for %x -- ignored\n", 4739 ahd_name(ahd), devinfo->channel, devinfo->target, 4740 last_msg); 4741 } 4742 return (response); 4743 } 4744 4745 /* 4746 * Process an ignore wide residue message. 4747 */ 4748 static void 4749 ahd_handle_ign_wide_residue(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4750 { 4751 u_int scb_index; 4752 struct scb *scb; 4753 4754 printf("%s: ahd_handle_ign_wide_residue\n", ahd_name(ahd)); 4755 4756 scb_index = ahd_get_scbptr(ahd); 4757 scb = ahd_lookup_scb(ahd, scb_index); 4758 /* 4759 * XXX Actually check data direction in the sequencer? 4760 * Perhaps add datadir to some spare bits in the hscb? 4761 */ 4762 if ((ahd_inb(ahd, SEQ_FLAGS) & DPHASE) == 0 4763 || ahd_get_transfer_dir(scb) != CAM_DIR_IN) { 4764 /* 4765 * Ignore the message if we haven't 4766 * seen an appropriate data phase yet. 4767 */ 4768 } else { 4769 /* 4770 * If the residual occurred on the last 4771 * transfer and the transfer request was 4772 * expected to end on an odd count, do 4773 * nothing. Otherwise, subtract a byte 4774 * and update the residual count accordingly. 4775 */ 4776 uint32_t sgptr; 4777 4778 sgptr = ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR); 4779 if ((sgptr & SG_LIST_NULL) != 0 4780 && (ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE) 4781 & SCB_XFERLEN_ODD) != 0) { 4782 /* 4783 * If the residual occurred on the last 4784 * transfer and the transfer request was 4785 * expected to end on an odd count, do 4786 * nothing. 4787 */ 4788 } else { 4789 uint32_t data_cnt; 4790 uint64_t data_addr; 4791 uint32_t sglen; 4792 4793 /* Pull in the rest of the sgptr */ 4794 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 4795 data_cnt = ahd_inl_scbram(ahd, SCB_RESIDUAL_DATACNT); 4796 if ((sgptr & SG_LIST_NULL) != 0) { 4797 /* 4798 * The residual data count is not updated 4799 * for the command run to completion case. 4800 * Explcitly zero the count. 4801 */ 4802 data_cnt &= ~AHD_SG_LEN_MASK; 4803 } 4804 data_addr = ahd_inq(ahd, SHADDR); 4805 data_cnt += 1; 4806 data_addr -= 1; 4807 sgptr &= SG_PTR_MASK; 4808 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 4809 struct ahd_dma64_seg *sg; 4810 4811 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 4812 4813 /* 4814 * The residual sg ptr points to the next S/G 4815 * to load so we must go back one. 4816 */ 4817 sg--; 4818 sglen = ahd_le32toh(sg->len) & AHD_SG_LEN_MASK; 4819 if (sg != scb->sg_list 4820 && sglen < (data_cnt & AHD_SG_LEN_MASK)) { 4821 4822 sg--; 4823 sglen = ahd_le32toh(sg->len); 4824 /* 4825 * Preserve High Address and SG_LIST 4826 * bits while setting the count to 1. 4827 */ 4828 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK)); 4829 data_addr = ahd_le64toh(sg->addr) 4830 + (sglen & AHD_SG_LEN_MASK) 4831 - 1; 4832 4833 /* 4834 * Increment sg so it points to the 4835 * "next" sg. 4836 */ 4837 sg++; 4838 sgptr = ahd_sg_virt_to_bus(ahd, scb, 4839 sg); 4840 } 4841 } else { 4842 struct ahd_dma_seg *sg; 4843 4844 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 4845 4846 /* 4847 * The residual sg ptr points to the next S/G 4848 * to load so we must go back one. 4849 */ 4850 sg--; 4851 sglen = ahd_le32toh(sg->len) & AHD_SG_LEN_MASK; 4852 if (sg != scb->sg_list 4853 && sglen < (data_cnt & AHD_SG_LEN_MASK)) { 4854 4855 sg--; 4856 sglen = ahd_le32toh(sg->len); 4857 /* 4858 * Preserve High Address and SG_LIST 4859 * bits while setting the count to 1. 4860 */ 4861 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK)); 4862 data_addr = ahd_le32toh(sg->addr) 4863 + (sglen & AHD_SG_LEN_MASK) 4864 - 1; 4865 4866 /* 4867 * Increment sg so it points to the 4868 * "next" sg. 4869 */ 4870 sg++; 4871 sgptr = ahd_sg_virt_to_bus(ahd, scb, 4872 sg); 4873 } 4874 } 4875 /* 4876 * Toggle the "oddness" of the transfer length 4877 * to handle this mid-transfer ignore wide 4878 * residue. This ensures that the oddness is 4879 * correct for subsequent data transfers. 4880 */ 4881 ahd_outb(ahd, SCB_TASK_ATTRIBUTE, 4882 ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE) 4883 ^ SCB_XFERLEN_ODD); 4884 4885 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 4886 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, data_cnt); 4887 /* 4888 * The FIFO's pointers will be updated if/when the 4889 * sequencer re-enters a data phase. 4890 */ 4891 } 4892 } 4893 } 4894 4895 4896 /* 4897 * Reinitialize the data pointers for the active transfer 4898 * based on its current residual. 4899 */ 4900 static void 4901 ahd_reinitialize_dataptrs(struct ahd_softc *ahd) 4902 { 4903 struct scb *scb; 4904 ahd_mode_state saved_modes; 4905 u_int scb_index; 4906 u_int wait; 4907 uint32_t sgptr; 4908 uint32_t resid; 4909 uint64_t dataptr; 4910 4911 AHD_ASSERT_MODES(ahd, AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK, 4912 AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK); 4913 4914 scb_index = ahd_get_scbptr(ahd); 4915 scb = ahd_lookup_scb(ahd, scb_index); 4916 4917 /* 4918 * Release and reacquire the FIFO so we 4919 * have a clean slate. 4920 */ 4921 ahd_outb(ahd, DFFSXFRCTL, CLRCHN); 4922 wait = 1000; 4923 while (--wait && !(ahd_inb(ahd, MDFFSTAT) & FIFOFREE)) 4924 ahd_delay(100); 4925 if (wait == 0) { 4926 ahd_print_path(ahd, scb); 4927 printf("ahd_reinitialize_dataptrs: Forcing FIFO free.\n"); 4928 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT); 4929 } 4930 saved_modes = ahd_save_modes(ahd); 4931 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 4932 ahd_outb(ahd, DFFSTAT, 4933 ahd_inb(ahd, DFFSTAT) 4934 | (saved_modes == 0x11 ? CURRFIFO_1 : CURRFIFO_0)); 4935 4936 /* 4937 * Determine initial values for data_addr and data_cnt 4938 * for resuming the data phase. 4939 */ 4940 sgptr = (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR + 3) << 24) 4941 | (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR + 2) << 16) 4942 | (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR + 1) << 8) 4943 | ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR); 4944 sgptr &= SG_PTR_MASK; 4945 4946 resid = (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 2) << 16) 4947 | (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 1) << 8) 4948 | ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT); 4949 4950 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 4951 struct ahd_dma64_seg *sg; 4952 4953 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 4954 4955 /* The residual sg_ptr always points to the next sg */ 4956 sg--; 4957 4958 dataptr = ahd_le64toh(sg->addr) 4959 + (ahd_le32toh(sg->len) & AHD_SG_LEN_MASK) 4960 - resid; 4961 ahd_outb(ahd, HADDR + 7, dataptr >> 56); 4962 ahd_outb(ahd, HADDR + 6, dataptr >> 48); 4963 ahd_outb(ahd, HADDR + 5, dataptr >> 40); 4964 ahd_outb(ahd, HADDR + 4, dataptr >> 32); 4965 } else { 4966 struct ahd_dma_seg *sg; 4967 4968 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 4969 4970 /* The residual sg_ptr always points to the next sg */ 4971 sg--; 4972 4973 dataptr = ahd_le32toh(sg->addr) 4974 + (ahd_le32toh(sg->len) & AHD_SG_LEN_MASK) 4975 - resid; 4976 ahd_outb(ahd, HADDR + 4, 4977 (ahd_le32toh(sg->len) & ~AHD_SG_LEN_MASK) >> 24); 4978 } 4979 ahd_outb(ahd, HADDR + 3, dataptr >> 24); 4980 ahd_outb(ahd, HADDR + 2, dataptr >> 16); 4981 ahd_outb(ahd, HADDR + 1, dataptr >> 8); 4982 ahd_outb(ahd, HADDR, dataptr); 4983 ahd_outb(ahd, HCNT + 2, resid >> 16); 4984 ahd_outb(ahd, HCNT + 1, resid >> 8); 4985 ahd_outb(ahd, HCNT, resid); 4986 } 4987 4988 /* 4989 * Handle the effects of issuing a bus device reset message. 4990 */ 4991 static void 4992 ahd_handle_devreset(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 4993 u_int lun, cam_status status, char *message, 4994 int verbose_level) 4995 { 4996 #ifdef AHD_TARGET_MODE 4997 struct ahd_tmode_tstate* tstate; 4998 #endif 4999 int found; 5000 5001 found = ahd_abort_scbs(ahd, devinfo->target, devinfo->channel, 5002 lun, SCB_LIST_NULL, devinfo->role, 5003 status); 5004 5005 #ifdef AHD_TARGET_MODE 5006 /* 5007 * Send an immediate notify ccb to all target mord peripheral 5008 * drivers affected by this action. 5009 */ 5010 tstate = ahd->enabled_targets[devinfo->our_scsiid]; 5011 if (tstate != NULL) { 5012 u_int cur_lun; 5013 u_int max_lun; 5014 5015 if (lun != CAM_LUN_WILDCARD) { 5016 cur_lun = 0; 5017 max_lun = AHD_NUM_LUNS - 1; 5018 } else { 5019 cur_lun = lun; 5020 max_lun = lun; 5021 } 5022 for (cur_lun <= max_lun; cur_lun++) { 5023 struct ahd_tmode_lstate* lstate; 5024 5025 lstate = tstate->enabled_luns[cur_lun]; 5026 if (lstate == NULL) 5027 continue; 5028 5029 ahd_queue_lstate_event(ahd, lstate, devinfo->our_scsiid, 5030 MSG_BUS_DEV_RESET, /*arg*/0); 5031 ahd_send_lstate_events(ahd, lstate); 5032 } 5033 } 5034 #endif 5035 5036 /* 5037 * Go back to async/narrow transfers and renegotiate. 5038 */ 5039 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 5040 AHD_TRANS_CUR, /*paused*/TRUE); 5041 ahd_set_syncrate(ahd, devinfo, /*period*/0, /*offset*/0, 5042 /*ppr_options*/0, AHD_TRANS_CUR, /*paused*/TRUE); 5043 5044 ahd_send_async(ahd, devinfo->channel, devinfo->target, 5045 lun, AC_SENT_BDR, NULL); 5046 5047 if (message != NULL 5048 && (verbose_level <= bootverbose)) 5049 printf("%s: %s on %c:%d. %d SCBs aborted\n", ahd_name(ahd), 5050 message, devinfo->channel, devinfo->target, found); 5051 } 5052 5053 #ifdef AHD_TARGET_MODE 5054 static void 5055 ahd_setup_target_msgin(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 5056 struct scb *scb) 5057 { 5058 5059 /* 5060 * To facilitate adding multiple messages together, 5061 * each routine should increment the index and len 5062 * variables instead of setting them explicitly. 5063 */ 5064 ahd->msgout_index = 0; 5065 ahd->msgout_len = 0; 5066 5067 if (scb != NULL && (scb->flags & SCB_AUTO_NEGOTIATE) != 0) 5068 ahd_build_transfer_msg(ahd, devinfo); 5069 else 5070 panic("ahd_intr: AWAITING target message with no message"); 5071 5072 ahd->msgout_index = 0; 5073 ahd->msg_type = MSG_TYPE_TARGET_MSGIN; 5074 } 5075 #endif 5076 /**************************** Initialization **********************************/ 5077 static u_int 5078 ahd_sglist_size(struct ahd_softc *ahd) 5079 { 5080 bus_size_t list_size; 5081 5082 list_size = sizeof(struct ahd_dma_seg) * AHD_NSEG; 5083 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 5084 list_size = sizeof(struct ahd_dma64_seg) * AHD_NSEG; 5085 return (list_size); 5086 } 5087 5088 /* 5089 * Calculate the optimum S/G List allocation size. S/G elements used 5090 * for a given transaction must be physically contiguous. Assume the 5091 * OS will allocate full pages to us, so it doesn't make sense to request 5092 * less than a page. 5093 */ 5094 static u_int 5095 ahd_sglist_allocsize(struct ahd_softc *ahd) 5096 { 5097 bus_size_t sg_list_increment; 5098 bus_size_t sg_list_size; 5099 bus_size_t max_list_size; 5100 bus_size_t best_list_size; 5101 5102 /* Start out with the minimum required for AHD_NSEG. */ 5103 sg_list_increment = ahd_sglist_size(ahd); 5104 sg_list_size = sg_list_increment; 5105 5106 /* Get us as close as possible to a page in size. */ 5107 while ((sg_list_size + sg_list_increment) <= PAGE_SIZE) 5108 sg_list_size += sg_list_increment; 5109 5110 /* 5111 * Try to reduce the amount of wastage by allocating 5112 * multiple pages. 5113 */ 5114 best_list_size = sg_list_size; 5115 max_list_size = roundup(sg_list_increment, PAGE_SIZE); 5116 if (max_list_size < 4 * PAGE_SIZE) 5117 max_list_size = 4 * PAGE_SIZE; 5118 if (max_list_size > (AHD_SCB_MAX_ALLOC * sg_list_increment)) 5119 max_list_size = (AHD_SCB_MAX_ALLOC * sg_list_increment); 5120 while ((sg_list_size + sg_list_increment) <= max_list_size 5121 && (sg_list_size % PAGE_SIZE) != 0) { 5122 bus_size_t new_mod; 5123 bus_size_t best_mod; 5124 5125 sg_list_size += sg_list_increment; 5126 new_mod = sg_list_size % PAGE_SIZE; 5127 best_mod = best_list_size % PAGE_SIZE; 5128 if (new_mod > best_mod || new_mod == 0) { 5129 best_list_size = sg_list_size; 5130 } 5131 } 5132 return (best_list_size); 5133 } 5134 5135 int 5136 ahd_softc_init(struct ahd_softc *ahd) 5137 { 5138 5139 ahd->unpause = 0; 5140 ahd->pause = PAUSE; 5141 return (0); 5142 } 5143 5144 void 5145 ahd_set_unit(struct ahd_softc *ahd, int unit) 5146 { 5147 ahd->unit = unit; 5148 } 5149 5150 void 5151 ahd_set_name(struct ahd_softc *ahd, char *name) 5152 { 5153 if (ahd->name != NULL) 5154 free(ahd->name, M_DEVBUF); 5155 ahd->name = name; 5156 } 5157 5158 void 5159 ahd_free(struct ahd_softc *ahd) 5160 { 5161 int i; 5162 5163 switch (ahd->init_level) { 5164 default: 5165 case 2: 5166 ahd_shutdown(ahd); 5167 TAILQ_REMOVE(&ahd_tailq, ahd, links); 5168 /* FALLTHROUGH */ 5169 case 1: 5170 bus_dmamap_unload(ahd->parent_dmat, ahd->shared_data_map.dmamap); 5171 bus_dmamap_destroy(ahd->parent_dmat, ahd->shared_data_map.dmamap); 5172 bus_dmamem_unmap(ahd->parent_dmat, (caddr_t)ahd->qoutfifo, ahd->shared_data_size); 5173 bus_dmamem_free(ahd->parent_dmat, &ahd->shared_data_map.dmasegs, ahd->shared_data_map.nseg); 5174 break; 5175 case 0: 5176 break; 5177 } 5178 5179 ahd_platform_free(ahd); 5180 ahd_fini_scbdata(ahd); 5181 for (i = 0; i < AHD_NUM_TARGETS; i++) { 5182 struct ahd_tmode_tstate *tstate; 5183 5184 tstate = ahd->enabled_targets[i]; 5185 if (tstate != NULL) { 5186 #if AHD_TARGET_MODE 5187 int j; 5188 5189 for (j = 0; j < AHD_NUM_LUNS; j++) { 5190 struct ahd_tmode_lstate *lstate; 5191 5192 lstate = tstate->enabled_luns[j]; 5193 if (lstate != NULL) { 5194 xpt_free_path(lstate->path); 5195 free(lstate, M_DEVBUF); 5196 } 5197 } 5198 #endif 5199 free(tstate, M_DEVBUF); 5200 } 5201 } 5202 #if AHD_TARGET_MODE 5203 if (ahd->black_hole != NULL) { 5204 xpt_free_path(ahd->black_hole->path); 5205 free(ahd->black_hole, M_DEVBUF); 5206 } 5207 #endif 5208 if (ahd->name != NULL) 5209 free(ahd->name, M_DEVBUF); 5210 if (ahd->seep_config != NULL) 5211 free(ahd->seep_config, M_DEVBUF); 5212 if (ahd->saved_stack != NULL) 5213 free(ahd->saved_stack, M_DEVBUF); 5214 #ifndef __FreeBSD__ 5215 free(ahd, M_DEVBUF); 5216 #endif 5217 return; 5218 } 5219 5220 void 5221 ahd_shutdown(void *arg) 5222 { 5223 struct ahd_softc *ahd; 5224 5225 ahd = (struct ahd_softc *)arg; 5226 5227 #ifdef AHD_DEBUG 5228 printf("%s: ahd_shutdown\n", ahd_name(ahd)); 5229 #endif 5230 /* 5231 * Stop periodic timer callbacks. 5232 */ 5233 ahd_timer_stop(&ahd->reset_timer); 5234 ahd_timer_stop(&ahd->stat_timer); 5235 5236 /* This will reset most registers to 0, but not all */ 5237 ahd_reset(ahd, /*reinit*/FALSE); 5238 } 5239 5240 /* 5241 * Reset the controller and record some information about it 5242 * that is only available just after a reset. If "reinit" is 5243 * non-zero, this reset occurred after initial configuration 5244 * and the caller requests that the chip be fully reinitialized 5245 * to a runable state. Chip interrupts are *not* enabled after 5246 * a reinitialization. The caller must enable interrupts via 5247 * ahd_intr_enable(). 5248 */ 5249 int 5250 ahd_reset(struct ahd_softc *ahd, int reinit) 5251 { 5252 u_int sxfrctl1; 5253 int wait; 5254 uint32_t cmd; 5255 struct ahd_pci_busdata *bd = ahd->bus_data; 5256 5257 /* 5258 * Preserve the value of the SXFRCTL1 register for all channels. 5259 * It contains settings that affect termination and we don't want 5260 * to disturb the integrity of the bus. 5261 */ 5262 ahd_pause(ahd); 5263 ahd_update_modes(ahd); 5264 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5265 sxfrctl1 = ahd_inb(ahd, SXFRCTL1); 5266 5267 cmd = pci_conf_read(bd->pc, bd->tag, PCI_COMMAND_STATUS_REG); 5268 5269 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) { 5270 uint32_t mod_cmd; 5271 5272 /* 5273 * A4 Razor #632 5274 * During the assertion of CHIPRST, the chip 5275 * does not disable its parity logic prior to 5276 * the start of the reset. This may cause a 5277 * parity error to be detected and thus a 5278 * spurious SERR or PERR assertion. Disble 5279 * PERR and SERR responses during the CHIPRST. 5280 */ 5281 mod_cmd = cmd & ~(PCI_COMMAND_PARITY_ENABLE|PCI_COMMAND_SERR_ENABLE); 5282 pci_conf_write(bd->pc, bd->tag, PCI_COMMAND_STATUS_REG, mod_cmd); 5283 } 5284 ahd_outb(ahd, HCNTRL, CHIPRST | ahd->pause); 5285 5286 /* 5287 * Ensure that the reset has finished. We delay 1000us 5288 * prior to reading the register to make sure the chip 5289 * has sufficiently completed its reset to handle register 5290 * accesses. 5291 */ 5292 wait = 1000; 5293 do { 5294 ahd_delay(1000); 5295 } while (--wait && !(ahd_inb(ahd, HCNTRL) & CHIPRSTACK)); 5296 5297 if (wait == 0) { 5298 printf("%s: WARNING - Failed chip reset! " 5299 "Trying to initialize anyway.\n", ahd_name(ahd)); 5300 } 5301 ahd_outb(ahd, HCNTRL, ahd->pause); 5302 5303 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) { 5304 /* 5305 * Clear any latched PCI error status and restore 5306 * previous SERR and PERR response enables. 5307 */ 5308 pci_conf_write(bd->pc, bd->tag, PCI_COMMAND_STATUS_REG, cmd | 5309 (PCI_STATUS_PARITY_ERROR | PCI_STATUS_TARGET_TARGET_ABORT | 5310 PCI_STATUS_MASTER_TARGET_ABORT | PCI_STATUS_MASTER_ABORT | 5311 PCI_STATUS_SPECIAL_ERROR)); 5312 } 5313 5314 /* 5315 * Mode should be SCSI after a chip reset, but lets 5316 * set it just to be safe. We touch the MODE_PTR 5317 * register directly so as to bypass the lazy update 5318 * ode in ahd_set_modes(). 5319 */ 5320 ahd_known_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5321 ahd_outb(ahd, MODE_PTR, 5322 ahd_build_mode_state(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI)); 5323 5324 /* 5325 * Restore SXFRCTL1. 5326 * 5327 * We must always initialize STPWEN to 1 before we 5328 * restore the saved values. STPWEN is initialized 5329 * to a tri-state condition which can only be cleared 5330 * by turning it on. 5331 */ 5332 ahd_outb(ahd, SXFRCTL1, sxfrctl1|STPWEN); 5333 ahd_outb(ahd, SXFRCTL1, sxfrctl1); 5334 5335 /* Determine chip configuration */ 5336 ahd->features &= ~AHD_WIDE; 5337 if ((ahd_inb(ahd, SBLKCTL) & SELWIDE) != 0) 5338 ahd->features |= AHD_WIDE; 5339 5340 /* 5341 * If a recovery action has forced a chip reset, 5342 * re-initialize the chip to our liking. 5343 */ 5344 if (reinit != 0) 5345 ahd_chip_init(ahd); 5346 5347 return (0); 5348 } 5349 5350 /* 5351 * Determine the number of SCBs available on the controller 5352 */ 5353 int 5354 ahd_probe_scbs(struct ahd_softc *ahd) { 5355 int i; 5356 5357 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 5358 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 5359 for (i = 0; i < AHD_SCB_MAX; i++) { 5360 int j; 5361 int ret; 5362 5363 ahd_set_scbptr(ahd, i); 5364 ahd_outw(ahd, SCB_BASE, i); 5365 for (j = 2; j < 64; j++) 5366 ahd_outb(ahd, SCB_BASE+j, 0); 5367 /* Start out life as unallocated (needing an abort) */ 5368 ahd_outb(ahd, SCB_CONTROL, MK_MESSAGE); 5369 ret = ahd_inw_scbram(ahd, SCB_BASE); 5370 if (ret != i) { 5371 printf("%s: ahd_probe_scbs (!=%d): returned 0x%x\n", ahd_name(ahd), i, ret); 5372 break; 5373 } 5374 ahd_set_scbptr(ahd, 0); 5375 ret = ahd_inw_scbram(ahd, SCB_BASE); 5376 if (ret != 0) { 5377 printf("ahd_probe_scbs (non zero): returned 0x%x\n", ret); 5378 break; 5379 } 5380 } 5381 return (i); 5382 } 5383 5384 static void 5385 ahd_initialize_hscbs(struct ahd_softc *ahd) 5386 { 5387 int i; 5388 5389 for (i = 0; i < ahd->scb_data.maxhscbs; i++) { 5390 ahd_set_scbptr(ahd, i); 5391 5392 /* Clear the control byte. */ 5393 ahd_outb(ahd, SCB_CONTROL, 0); 5394 5395 /* Set the next pointer */ 5396 ahd_outw(ahd, SCB_NEXT, SCB_LIST_NULL); 5397 } 5398 } 5399 5400 static int 5401 ahd_init_scbdata(struct ahd_softc *ahd) 5402 { 5403 struct scb_data *scb_data; 5404 int i; 5405 5406 scb_data = &ahd->scb_data; 5407 TAILQ_INIT(&scb_data->free_scbs); 5408 for (i = 0; i < AHD_NUM_TARGETS * AHD_NUM_LUNS_NONPKT; i++) 5409 LIST_INIT(&scb_data->free_scb_lists[i]); 5410 LIST_INIT(&scb_data->any_dev_free_scb_list); 5411 SLIST_INIT(&scb_data->hscb_maps); 5412 SLIST_INIT(&scb_data->sg_maps); 5413 SLIST_INIT(&scb_data->sense_maps); 5414 5415 /* Determine the number of hardware SCBs and initialize them */ 5416 scb_data->maxhscbs = ahd_probe_scbs(ahd); 5417 if (scb_data->maxhscbs == 0) { 5418 printf("%s: No SCB space found\n", ahd_name(ahd)); 5419 return (ENXIO); 5420 } 5421 ahd_initialize_hscbs(ahd); 5422 5423 /* 5424 * Create our DMA tags. These tags define the kinds of device 5425 * accessible memory allocations and memory mappings we will 5426 * need to perform during normal operation. 5427 * 5428 * Unless we need to further restrict the allocation, we rely 5429 * on the restrictions of the parent dmat, hence the common 5430 * use of MAXADDR and MAXSIZE. 5431 */ 5432 5433 /* Perform initial CCB allocation */ 5434 ahd_alloc_scbs(ahd); 5435 5436 if (scb_data->numscbs == 0) { 5437 printf("%s: ahd_init_scbdata - " 5438 "Unable to allocate initial scbs\n", 5439 ahd_name(ahd)); 5440 goto error_exit; 5441 } 5442 5443 /* 5444 * Note that we were successfull 5445 */ 5446 return (0); 5447 5448 error_exit: 5449 5450 return (ENOMEM); 5451 } 5452 5453 static struct scb * 5454 ahd_find_scb_by_tag(struct ahd_softc *ahd, u_int tag) 5455 { 5456 struct scb *scb; 5457 5458 /* 5459 * Look on the pending list. 5460 */ 5461 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 5462 if (SCB_GET_TAG(scb) == tag) 5463 return (scb); 5464 } 5465 5466 /* 5467 * Then on all of the collision free lists. 5468 */ 5469 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 5470 struct scb *list_scb; 5471 5472 list_scb = scb; 5473 do { 5474 if (SCB_GET_TAG(list_scb) == tag) 5475 return (list_scb); 5476 list_scb = LIST_NEXT(list_scb, collision_links); 5477 } while (list_scb); 5478 } 5479 5480 /* 5481 * And finally on the generic free list. 5482 */ 5483 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) { 5484 if (SCB_GET_TAG(scb) == tag) 5485 return (scb); 5486 } 5487 5488 return (NULL); 5489 } 5490 5491 static void 5492 ahd_fini_scbdata(struct ahd_softc *ahd) 5493 { 5494 struct scb_data *scb_data; 5495 5496 scb_data = &ahd->scb_data; 5497 if (scb_data == NULL) 5498 return; 5499 5500 switch (scb_data->init_level) { 5501 default: 5502 case 3: 5503 { 5504 struct map_node *sns_map; 5505 5506 while ((sns_map = SLIST_FIRST(&scb_data->sense_maps)) != NULL) { 5507 SLIST_REMOVE_HEAD(&scb_data->sense_maps, links); 5508 ahd_freedmamem(ahd->parent_dmat, PAGE_SIZE, 5509 sns_map->dmamap, (caddr_t)sns_map->vaddr, 5510 &sns_map->dmasegs, sns_map->nseg); 5511 free(sns_map, M_DEVBUF); 5512 } 5513 /* FALLTHROUGH */ 5514 } 5515 case 2: 5516 { 5517 struct map_node *sg_map; 5518 5519 while ((sg_map = SLIST_FIRST(&scb_data->sg_maps)) != NULL) { 5520 SLIST_REMOVE_HEAD(&scb_data->sg_maps, links); 5521 ahd_freedmamem(ahd->parent_dmat, ahd_sglist_allocsize(ahd), 5522 sg_map->dmamap, (caddr_t)sg_map->vaddr, 5523 &sg_map->dmasegs, sg_map->nseg); 5524 free(sg_map, M_DEVBUF); 5525 } 5526 /* FALLTHROUGH */ 5527 } 5528 case 1: 5529 { 5530 struct map_node *hscb_map; 5531 5532 while ((hscb_map = SLIST_FIRST(&scb_data->hscb_maps)) != NULL) { 5533 SLIST_REMOVE_HEAD(&scb_data->hscb_maps, links); 5534 ahd_freedmamem(ahd->parent_dmat, PAGE_SIZE, 5535 hscb_map->dmamap, (caddr_t)hscb_map->vaddr, 5536 &hscb_map->dmasegs, hscb_map->nseg); 5537 free(hscb_map, M_DEVBUF); 5538 } 5539 /* FALLTHROUGH */ 5540 } 5541 case 0: 5542 break; 5543 } 5544 } 5545 5546 /* 5547 * DSP filter Bypass must be enabled until the first selection 5548 * after a change in bus mode (Razor #491 and #493). 5549 */ 5550 static void 5551 ahd_setup_iocell_workaround(struct ahd_softc *ahd) 5552 { 5553 ahd_mode_state saved_modes; 5554 5555 saved_modes = ahd_save_modes(ahd); 5556 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 5557 ahd_outb(ahd, DSPDATACTL, ahd_inb(ahd, DSPDATACTL) 5558 | BYPASSENAB | RCVROFFSTDIS | XMITOFFSTDIS); 5559 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) | (ENSELDO|ENSELDI)); 5560 #ifdef AHD_DEBUG 5561 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5562 printf("%s: Setting up iocell workaround\n", ahd_name(ahd)); 5563 #endif 5564 ahd_restore_modes(ahd, saved_modes); 5565 ahd->flags &= ~AHD_HAD_FIRST_SEL; 5566 } 5567 5568 static void 5569 ahd_iocell_first_selection(struct ahd_softc *ahd) 5570 { 5571 ahd_mode_state saved_modes; 5572 u_int sblkctl; 5573 5574 if ((ahd->flags & AHD_HAD_FIRST_SEL) != 0) 5575 return; 5576 saved_modes = ahd_save_modes(ahd); 5577 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5578 sblkctl = ahd_inb(ahd, SBLKCTL); 5579 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 5580 #ifdef AHD_DEBUG 5581 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5582 printf("%s: iocell first selection\n", ahd_name(ahd)); 5583 #endif 5584 if ((sblkctl & ENAB40) != 0) { 5585 ahd_outb(ahd, DSPDATACTL, 5586 ahd_inb(ahd, DSPDATACTL) & ~BYPASSENAB); 5587 #ifdef AHD_DEBUG 5588 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5589 printf("%s: BYPASS now disabled\n", ahd_name(ahd)); 5590 #endif 5591 } 5592 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) & ~(ENSELDO|ENSELDI)); 5593 ahd_outb(ahd, CLRINT, CLRSCSIINT); 5594 ahd_restore_modes(ahd, saved_modes); 5595 ahd->flags |= AHD_HAD_FIRST_SEL; 5596 } 5597 5598 /*************************** SCB Management ***********************************/ 5599 static void 5600 ahd_add_col_list(struct ahd_softc *ahd, struct scb *scb, u_int col_idx) 5601 { 5602 struct scb_list *free_list; 5603 struct scb_tailq *free_tailq; 5604 struct scb *first_scb; 5605 5606 scb->flags |= SCB_ON_COL_LIST; 5607 AHD_SET_SCB_COL_IDX(scb, col_idx); 5608 free_list = &ahd->scb_data.free_scb_lists[col_idx]; 5609 free_tailq = &ahd->scb_data.free_scbs; 5610 first_scb = LIST_FIRST(free_list); 5611 if (first_scb != NULL) { 5612 LIST_INSERT_AFTER(first_scb, scb, collision_links); 5613 } else { 5614 LIST_INSERT_HEAD(free_list, scb, collision_links); 5615 TAILQ_INSERT_TAIL(free_tailq, scb, links.tqe); 5616 } 5617 } 5618 5619 static void 5620 ahd_rem_col_list(struct ahd_softc *ahd, struct scb *scb) 5621 { 5622 struct scb_list *free_list; 5623 struct scb_tailq *free_tailq; 5624 struct scb *first_scb; 5625 u_int col_idx; 5626 5627 scb->flags &= ~SCB_ON_COL_LIST; 5628 col_idx = AHD_GET_SCB_COL_IDX(ahd, scb); 5629 free_list = &ahd->scb_data.free_scb_lists[col_idx]; 5630 free_tailq = &ahd->scb_data.free_scbs; 5631 first_scb = LIST_FIRST(free_list); 5632 if (first_scb == scb) { 5633 struct scb *next_scb; 5634 5635 /* 5636 * Maintain order in the collision free 5637 * lists for fairness if this device has 5638 * other colliding tags active. 5639 */ 5640 next_scb = LIST_NEXT(scb, collision_links); 5641 if (next_scb != NULL) { 5642 TAILQ_INSERT_AFTER(free_tailq, scb, 5643 next_scb, links.tqe); 5644 } 5645 TAILQ_REMOVE(free_tailq, scb, links.tqe); 5646 } 5647 LIST_REMOVE(scb, collision_links); 5648 } 5649 5650 /* 5651 * Get a free scb. If there are none, see if we can allocate a new SCB. 5652 */ 5653 struct scb * 5654 ahd_get_scb(struct ahd_softc *ahd, u_int col_idx) 5655 { 5656 struct scb *scb; 5657 int tries; 5658 5659 tries = 0; 5660 look_again: 5661 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 5662 if (AHD_GET_SCB_COL_IDX(ahd, scb) != col_idx) { 5663 ahd_rem_col_list(ahd, scb); 5664 goto found; 5665 } 5666 } 5667 if ((scb = LIST_FIRST(&ahd->scb_data.any_dev_free_scb_list)) == NULL) { 5668 5669 if (tries++ != 0) 5670 return (NULL); 5671 ahd_alloc_scbs(ahd); 5672 goto look_again; 5673 } 5674 LIST_REMOVE(scb, links.le); 5675 if (col_idx != AHD_NEVER_COL_IDX 5676 && (scb->col_scb != NULL) 5677 && (scb->col_scb->flags & SCB_ACTIVE) == 0) { 5678 LIST_REMOVE(scb->col_scb, links.le); 5679 ahd_add_col_list(ahd, scb->col_scb, col_idx); 5680 } 5681 found: 5682 scb->flags |= SCB_ACTIVE; 5683 return (scb); 5684 } 5685 5686 /* 5687 * Return an SCB resource to the free list. 5688 */ 5689 void 5690 ahd_free_scb(struct ahd_softc *ahd, struct scb *scb) 5691 { 5692 5693 /* Clean up for the next user */ 5694 scb->flags = SCB_FLAG_NONE; 5695 scb->hscb->control = 0; 5696 ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = NULL; 5697 5698 if (scb->col_scb == NULL) { 5699 5700 /* 5701 * No collision possible. Just free normally. 5702 */ 5703 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 5704 scb, links.le); 5705 } else if ((scb->col_scb->flags & SCB_ON_COL_LIST) != 0) { 5706 5707 /* 5708 * The SCB we might have collided with is on 5709 * a free collision list. Put both SCBs on 5710 * the generic list. 5711 */ 5712 ahd_rem_col_list(ahd, scb->col_scb); 5713 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 5714 scb, links.le); 5715 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 5716 scb->col_scb, links.le); 5717 } else if ((scb->col_scb->flags 5718 & (SCB_PACKETIZED|SCB_ACTIVE)) == SCB_ACTIVE 5719 && (scb->col_scb->hscb->control & TAG_ENB) != 0) { 5720 5721 /* 5722 * The SCB we might collide with on the next allocation 5723 * is still active in a non-packetized, tagged, context. 5724 * Put us on the SCB collision list. 5725 */ 5726 ahd_add_col_list(ahd, scb, 5727 AHD_GET_SCB_COL_IDX(ahd, scb->col_scb)); 5728 } else { 5729 /* 5730 * The SCB we might collide with on the next allocation 5731 * is either active in a packetized context, or free. 5732 * Since we can't collide, put this SCB on the generic 5733 * free list. 5734 */ 5735 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 5736 scb, links.le); 5737 } 5738 5739 ahd_platform_scb_free(ahd, scb); 5740 } 5741 5742 void 5743 ahd_alloc_scbs(struct ahd_softc *ahd) 5744 { 5745 struct scb_data *scb_data; 5746 struct scb *next_scb; 5747 struct hardware_scb *hscb; 5748 struct map_node *hscb_map; 5749 struct map_node *sg_map; 5750 struct map_node *sense_map; 5751 uint8_t *segs; 5752 uint8_t *sense_data; 5753 bus_addr_t hscb_busaddr; 5754 bus_addr_t sg_busaddr; 5755 bus_addr_t sense_busaddr; 5756 int newcount; 5757 int i; 5758 5759 scb_data = &ahd->scb_data; 5760 if (scb_data->numscbs >= AHD_SCB_MAX_ALLOC) 5761 /* Can't allocate any more */ 5762 return; 5763 5764 KASSERT(scb_data->scbs_left >= 0); 5765 if (scb_data->scbs_left != 0) { 5766 int offset; 5767 5768 offset = (PAGE_SIZE / sizeof(*hscb)) - scb_data->scbs_left; 5769 hscb_map = SLIST_FIRST(&scb_data->hscb_maps); 5770 hscb = &((struct hardware_scb *)hscb_map->vaddr)[offset]; 5771 hscb_busaddr = hscb_map->physaddr + (offset * sizeof(*hscb)); 5772 } else { 5773 hscb_map = malloc(sizeof(*hscb_map), M_DEVBUF, M_NOWAIT); 5774 5775 if (hscb_map == NULL) 5776 return; 5777 5778 memset(hscb_map, 0, sizeof(*hscb_map)); 5779 5780 /* Allocate the next batch of hardware SCBs */ 5781 if (ahd_createdmamem(ahd->parent_dmat, PAGE_SIZE, ahd->sc_dmaflags, 5782 &hscb_map->dmamap, (caddr_t *)&hscb_map->vaddr, 5783 &hscb_map->physaddr, &hscb_map->dmasegs, 5784 &hscb_map->nseg, ahd_name(ahd), 5785 "hardware SCB structures") < 0) { 5786 free(hscb_map, M_DEVBUF); 5787 return; 5788 } 5789 5790 SLIST_INSERT_HEAD(&scb_data->hscb_maps, hscb_map, links); 5791 5792 hscb = (struct hardware_scb *)hscb_map->vaddr; 5793 hscb_busaddr = hscb_map->physaddr; 5794 scb_data->scbs_left = PAGE_SIZE / sizeof(*hscb); 5795 } 5796 5797 scb_data->init_level++; 5798 5799 if (scb_data->sgs_left != 0) { 5800 int offset; 5801 5802 offset = ((ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd)) 5803 - scb_data->sgs_left) * ahd_sglist_size(ahd); 5804 sg_map = SLIST_FIRST(&scb_data->sg_maps); 5805 segs = sg_map->vaddr + offset; 5806 sg_busaddr = sg_map->physaddr + offset; 5807 } else { 5808 sg_map = malloc(sizeof(*sg_map), M_DEVBUF, M_NOWAIT); 5809 5810 if (sg_map == NULL) 5811 return; 5812 5813 bzero(sg_map, sizeof(*sg_map)); 5814 5815 /* Allocate the next batch of S/G lists */ 5816 if (ahd_createdmamem(ahd->parent_dmat, ahd_sglist_allocsize(ahd), ahd->sc_dmaflags, 5817 &sg_map->dmamap, (caddr_t *)&sg_map->vaddr, 5818 &sg_map->physaddr, &sg_map->dmasegs, 5819 &sg_map->nseg, ahd_name(ahd), 5820 "SG data structures") < 0) { 5821 free(sg_map, M_DEVBUF); 5822 return; 5823 } 5824 5825 SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links); 5826 5827 segs = sg_map->vaddr; 5828 sg_busaddr = sg_map->physaddr; 5829 scb_data->sgs_left = 5830 ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd); 5831 #ifdef AHD_DEBUG 5832 if (ahd_debug & AHD_SHOW_MEMORY) 5833 printf("%s: ahd_alloc_scbs - Mapped SG data\n", ahd_name(ahd)); 5834 #endif 5835 } 5836 5837 scb_data->init_level++; 5838 5839 5840 if (scb_data->sense_left != 0) { 5841 int offset; 5842 5843 offset = PAGE_SIZE - (AHD_SENSE_BUFSIZE * scb_data->sense_left); 5844 sense_map = SLIST_FIRST(&scb_data->sense_maps); 5845 sense_data = sense_map->vaddr + offset; 5846 sense_busaddr = sense_map->physaddr + offset; 5847 } else { 5848 sense_map = malloc(sizeof(*sense_map), M_DEVBUF, M_NOWAIT); 5849 5850 if (sense_map == NULL) 5851 return; 5852 5853 bzero(sense_map, sizeof(*sense_map)); 5854 5855 /* Allocate the next batch of sense buffers */ 5856 if (ahd_createdmamem(ahd->parent_dmat, PAGE_SIZE, ahd->sc_dmaflags, 5857 &sense_map->dmamap, (caddr_t *)&sense_map->vaddr, 5858 &sense_map->physaddr, &sense_map->dmasegs, 5859 &sense_map->nseg, ahd_name(ahd), 5860 "Sense Data structures") < 0) { 5861 free(sense_map, M_DEVBUF); 5862 return; 5863 } 5864 5865 SLIST_INSERT_HEAD(&scb_data->sense_maps, sense_map, links); 5866 5867 sense_data = sense_map->vaddr; 5868 sense_busaddr = sense_map->physaddr; 5869 scb_data->sense_left = PAGE_SIZE / AHD_SENSE_BUFSIZE; 5870 #ifdef AHD_DEBUG 5871 if (ahd_debug & AHD_SHOW_MEMORY) 5872 printf("%s: ahd_alloc_scbs - Mapped sense data\n", ahd_name(ahd)); 5873 #endif 5874 } 5875 5876 scb_data->init_level++; 5877 5878 newcount = MIN(scb_data->sense_left, scb_data->scbs_left); 5879 newcount = MIN(newcount, scb_data->sgs_left); 5880 newcount = MIN(newcount, (AHD_SCB_MAX_ALLOC - scb_data->numscbs)); 5881 scb_data->sense_left -= newcount; 5882 scb_data->scbs_left -= newcount; 5883 scb_data->sgs_left -= newcount; 5884 5885 for (i = 0; i < newcount; i++) { 5886 u_int col_tag; 5887 5888 struct scb_platform_data *pdata; 5889 #ifndef __linux__ 5890 int error; 5891 #endif 5892 next_scb = (struct scb *)malloc(sizeof(*next_scb), 5893 M_DEVBUF, M_NOWAIT); 5894 if (next_scb == NULL) 5895 break; 5896 5897 pdata = (struct scb_platform_data *)malloc(sizeof(*pdata), 5898 M_DEVBUF, M_NOWAIT); 5899 if (pdata == NULL) { 5900 free(next_scb, M_DEVBUF); 5901 break; 5902 } 5903 next_scb->platform_data = pdata; 5904 next_scb->hscb_map = hscb_map; 5905 next_scb->sg_map = sg_map; 5906 next_scb->sense_map = sense_map; 5907 next_scb->sg_list = segs; 5908 next_scb->sense_data = sense_data; 5909 next_scb->sense_busaddr = sense_busaddr; 5910 memset(hscb, 0, sizeof(*hscb)); 5911 next_scb->hscb = hscb; 5912 hscb->hscb_busaddr = ahd_htole32(hscb_busaddr); 5913 KASSERT((vaddr_t)hscb >= (vaddr_t)hscb_map->vaddr && 5914 (vaddr_t)hscb < (vaddr_t)hscb_map->vaddr + PAGE_SIZE); 5915 5916 /* 5917 * The sequencer always starts with the second entry. 5918 * The first entry is embedded in the scb. 5919 */ 5920 next_scb->sg_list_busaddr = sg_busaddr; 5921 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 5922 next_scb->sg_list_busaddr 5923 += sizeof(struct ahd_dma64_seg); 5924 else 5925 next_scb->sg_list_busaddr += sizeof(struct ahd_dma_seg); 5926 next_scb->ahd_softc = ahd; 5927 next_scb->flags = SCB_FLAG_NONE; 5928 5929 error = bus_dmamap_create(ahd->parent_dmat, 5930 AHD_MAXTRANSFER_SIZE, AHD_NSEG, MAXBSIZE, 0, 5931 BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW|ahd->sc_dmaflags, 5932 &next_scb->dmamap); 5933 if (error != 0) { 5934 free(next_scb, M_DEVBUF); 5935 free(pdata, M_DEVBUF); 5936 break; 5937 } 5938 next_scb->hscb->tag = ahd_htole16(scb_data->numscbs); 5939 col_tag = scb_data->numscbs ^ 0x100; 5940 next_scb->col_scb = ahd_find_scb_by_tag(ahd, col_tag); 5941 if (next_scb->col_scb != NULL) 5942 next_scb->col_scb->col_scb = next_scb; 5943 ahd_free_scb(ahd, next_scb); 5944 hscb++; 5945 hscb_busaddr += sizeof(*hscb); 5946 segs += ahd_sglist_size(ahd); 5947 sg_busaddr += ahd_sglist_size(ahd); 5948 sense_data += AHD_SENSE_BUFSIZE; 5949 sense_busaddr += AHD_SENSE_BUFSIZE; 5950 scb_data->numscbs++; 5951 } 5952 } 5953 5954 void 5955 ahd_controller_info(struct ahd_softc *ahd, char *buf, size_t l) 5956 { 5957 const char *speed; 5958 const char *type; 5959 int len; 5960 char *ep; 5961 5962 ep = buf + l; 5963 5964 len = snprintf(buf, ep - buf, "%s: ", 5965 ahd_chip_names[ahd->chip & AHD_CHIPID_MASK]); 5966 buf += len; 5967 5968 speed = "Ultra320 "; 5969 if ((ahd->features & AHD_WIDE) != 0) { 5970 type = "Wide "; 5971 } else { 5972 type = "Single "; 5973 } 5974 len = snprintf(buf, ep - buf, "%s%sChannel %c, SCSI Id=%d, ", 5975 speed, type, ahd->channel, ahd->our_id); 5976 buf += len; 5977 5978 snprintf(buf, ep - buf, "%s, %d SCBs", ahd->bus_description, 5979 ahd->scb_data.maxhscbs); 5980 } 5981 5982 static const char *channel_strings[] = { 5983 "Primary Low", 5984 "Primary High", 5985 "Secondary Low", 5986 "Secondary High" 5987 }; 5988 5989 static const char *termstat_strings[] = { 5990 "Terminated Correctly", 5991 "Over Terminated", 5992 "Under Terminated", 5993 "Not Configured" 5994 }; 5995 5996 /* 5997 * Start the board, ready for normal operation 5998 */ 5999 int 6000 ahd_init(struct ahd_softc *ahd) 6001 { 6002 uint8_t *next_vaddr; 6003 bus_addr_t next_baddr; 6004 size_t driver_data_size; 6005 int i; 6006 int error; 6007 u_int warn_user; 6008 uint8_t current_sensing; 6009 uint8_t fstat; 6010 6011 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 6012 6013 ahd->stack_size = ahd_probe_stack_size(ahd); 6014 ahd->saved_stack = malloc(ahd->stack_size * sizeof(uint16_t), 6015 M_DEVBUF, M_NOWAIT); 6016 if (ahd->saved_stack == NULL) 6017 return (ENOMEM); 6018 /* Zero the memory */ 6019 memset(ahd->saved_stack, 0, ahd->stack_size * sizeof(uint16_t)); 6020 6021 /* 6022 * Verify that the compiler hasn't over-agressively 6023 * padded important structures. 6024 */ 6025 if (sizeof(struct hardware_scb) != 64) 6026 panic("Hardware SCB size is incorrect"); 6027 6028 #ifdef AHD_DEBUG 6029 if ((ahd_debug & AHD_DEBUG_SEQUENCER) != 0) 6030 ahd->flags |= AHD_SEQUENCER_DEBUG; 6031 #endif 6032 6033 /* 6034 * Default to allowing initiator operations. 6035 */ 6036 ahd->flags |= AHD_INITIATORROLE; 6037 6038 /* 6039 * Only allow target mode features if this unit has them enabled. 6040 */ 6041 if ((AHD_TMODE_ENABLE & (0x1 << ahd->unit)) == 0) 6042 ahd->features &= ~AHD_TARGETMODE; 6043 6044 /* 6045 * DMA tag for our command fifos and other data in system memory 6046 * the card's sequencer must be able to access. For initiator 6047 * roles, we need to allocate space for the qoutfifo. When providing 6048 * for the target mode role, we must additionally provide space for 6049 * the incoming target command fifo. 6050 */ 6051 driver_data_size = AHD_SCB_MAX * sizeof(uint16_t) 6052 + sizeof(struct hardware_scb); 6053 if ((ahd->features & AHD_TARGETMODE) != 0) 6054 driver_data_size += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6055 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) 6056 driver_data_size += PKT_OVERRUN_BUFSIZE; 6057 ahd->shared_data_size = driver_data_size; 6058 6059 memset(&ahd->shared_data_map, 0, sizeof(ahd->shared_data_map)); 6060 ahd->sc_dmaflags = BUS_DMA_NOWAIT; 6061 6062 if (ahd_createdmamem(ahd->parent_dmat, ahd->shared_data_size, 6063 ahd->sc_dmaflags, 6064 &ahd->shared_data_map.dmamap, (caddr_t *)&ahd->shared_data_map.vaddr, 6065 &ahd->shared_data_map.physaddr, &ahd->shared_data_map.dmasegs, 6066 &ahd->shared_data_map.nseg, ahd_name(ahd), "shared data") < 0) 6067 return (ENOMEM); 6068 ahd->qoutfifo = (void *) ahd->shared_data_map.vaddr; 6069 6070 ahd->init_level++; 6071 6072 next_vaddr = (uint8_t *)&ahd->qoutfifo[AHD_QOUT_SIZE]; 6073 next_baddr = ahd->shared_data_map.physaddr + AHD_QOUT_SIZE*sizeof(uint16_t); 6074 if ((ahd->features & AHD_TARGETMODE) != 0) { 6075 ahd->targetcmds = (struct target_cmd *)next_vaddr; 6076 next_vaddr += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6077 next_baddr += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6078 } 6079 6080 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) { 6081 ahd->overrun_buf = next_vaddr; 6082 next_vaddr += PKT_OVERRUN_BUFSIZE; 6083 next_baddr += PKT_OVERRUN_BUFSIZE; 6084 } 6085 6086 /* 6087 * We need one SCB to serve as the "next SCB". Since the 6088 * tag identifier in this SCB will never be used, there is 6089 * no point in using a valid HSCB tag from an SCB pulled from 6090 * the standard free pool. So, we allocate this "sentinel" 6091 * specially from the DMA safe memory chunk used for the QOUTFIFO. 6092 */ 6093 ahd->next_queued_hscb = (struct hardware_scb *)next_vaddr; 6094 ahd->next_queued_hscb_map = &ahd->shared_data_map; 6095 ahd->next_queued_hscb->hscb_busaddr = ahd_htole32(next_baddr); 6096 6097 memset(&ahd->scb_data, 0, sizeof(struct scb_data)); 6098 6099 /* Allocate SCB data now that parent_dmat is initialized */ 6100 if (ahd_init_scbdata(ahd) != 0) 6101 return (ENOMEM); 6102 6103 if ((ahd->flags & AHD_INITIATORROLE) == 0) 6104 ahd->flags &= ~AHD_RESET_BUS_A; 6105 6106 /* 6107 * Before committing these settings to the chip, give 6108 * the OSM one last chance to modify our configuration. 6109 */ 6110 ahd_platform_init(ahd); 6111 6112 /* Bring up the chip. */ 6113 ahd_chip_init(ahd); 6114 6115 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 6116 6117 if ((ahd->flags & AHD_CURRENT_SENSING) == 0) 6118 goto init_done; 6119 6120 /* 6121 * Verify termination based on current draw and 6122 * warn user if the bus is over/under terminated. 6123 */ 6124 error = ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 6125 CURSENSE_ENB); 6126 if (error != 0) { 6127 printf("%s: current sensing timeout 1\n", ahd_name(ahd)); 6128 goto init_done; 6129 } 6130 for (i = 20, fstat = FLX_FSTAT_BUSY; 6131 (fstat & FLX_FSTAT_BUSY) != 0 && i; i--) { 6132 error = ahd_read_flexport(ahd, FLXADDR_FLEXSTAT, &fstat); 6133 if (error != 0) { 6134 printf("%s: current sensing timeout 2\n", 6135 ahd_name(ahd)); 6136 goto init_done; 6137 } 6138 } 6139 if (i == 0) { 6140 printf("%s: Timedout during current-sensing test\n", 6141 ahd_name(ahd)); 6142 goto init_done; 6143 } 6144 6145 /* Latch Current Sensing status. */ 6146 error = ahd_read_flexport(ahd, FLXADDR_CURRENT_STAT, ¤t_sensing); 6147 if (error != 0) { 6148 printf("%s: current sensing timeout 3\n", ahd_name(ahd)); 6149 goto init_done; 6150 } 6151 6152 /* Diable current sensing. */ 6153 ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 0); 6154 6155 #ifdef AHD_DEBUG 6156 if ((ahd_debug & AHD_SHOW_TERMCTL) != 0) { 6157 printf("%s: current_sensing == 0x%x\n", 6158 ahd_name(ahd), current_sensing); 6159 } 6160 #endif 6161 warn_user = 0; 6162 for (i = 0; i < 4; i++, current_sensing >>= FLX_CSTAT_SHIFT) { 6163 u_int term_stat; 6164 6165 term_stat = (current_sensing & FLX_CSTAT_MASK); 6166 switch (term_stat) { 6167 case FLX_CSTAT_OVER: 6168 case FLX_CSTAT_UNDER: 6169 warn_user++; 6170 case FLX_CSTAT_INVALID: 6171 case FLX_CSTAT_OKAY: 6172 if (warn_user == 0 && bootverbose == 0) 6173 break; 6174 printf("%s: %s Channel %s\n", ahd_name(ahd), 6175 channel_strings[i], termstat_strings[term_stat]); 6176 break; 6177 } 6178 } 6179 if (warn_user) { 6180 printf("%s: WARNING. Termination is not configured correctly.\n" 6181 "%s: WARNING. SCSI bus operations may FAIL.\n", 6182 ahd_name(ahd), ahd_name(ahd)); 6183 } 6184 init_done: 6185 ahd_reset_current_bus(ahd); 6186 ahd_restart(ahd); 6187 ahd_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_US, 6188 ahd_stat_timer, ahd); 6189 6190 /* We have to wait until after any system dumps... */ 6191 ahd->shutdown_hook = shutdownhook_establish(ahd_shutdown, ahd); 6192 6193 return (0); 6194 } 6195 6196 /* 6197 * (Re)initialize chip state after a chip reset. 6198 */ 6199 static void 6200 ahd_chip_init(struct ahd_softc *ahd) 6201 { 6202 uint32_t busaddr; 6203 u_int sxfrctl1; 6204 u_int scsiseq_template; 6205 u_int wait; 6206 u_int i; 6207 u_int target; 6208 6209 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6210 /* 6211 * Take the LED out of diagnostic mode 6212 */ 6213 ahd_outb(ahd, SBLKCTL, ahd_inb(ahd, SBLKCTL) & ~(DIAGLEDEN|DIAGLEDON)); 6214 6215 /* 6216 * Return HS_MAILBOX to its default value. 6217 */ 6218 ahd->hs_mailbox = 0; 6219 ahd_outb(ahd, HS_MAILBOX, 0); 6220 6221 /* Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1. */ 6222 ahd_outb(ahd, IOWNID, ahd->our_id); 6223 ahd_outb(ahd, TOWNID, ahd->our_id); 6224 sxfrctl1 = (ahd->flags & AHD_TERM_ENB_A) != 0 ? STPWEN : 0; 6225 sxfrctl1 |= (ahd->flags & AHD_SPCHK_ENB_A) != 0 ? ENSPCHK : 0; 6226 if ((ahd->bugs & AHD_LONG_SETIMO_BUG) 6227 && (ahd->seltime != STIMESEL_MIN)) { 6228 /* 6229 * The selection timer duration is twice as long 6230 * as it should be. Halve it by adding "1" to 6231 * the user specified setting. 6232 */ 6233 sxfrctl1 |= ahd->seltime + STIMESEL_BUG_ADJ; 6234 } else { 6235 sxfrctl1 |= ahd->seltime; 6236 } 6237 6238 ahd_outb(ahd, SXFRCTL0, DFON); 6239 ahd_outb(ahd, SXFRCTL1, sxfrctl1|ahd->seltime|ENSTIMER|ACTNEGEN); 6240 ahd_outb(ahd, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR); 6241 6242 /* 6243 * Now that termination is set, wait for up 6244 * to 500ms for our transceivers to settle. If 6245 * the adapter does not have a cable attached, 6246 * the transceivers may never settle, so don't 6247 * complain if we fail here. 6248 */ 6249 for (wait = 10000; 6250 (ahd_inb(ahd, SBLKCTL) & (ENAB40|ENAB20)) == 0 && wait; 6251 wait--) 6252 ahd_delay(100); 6253 6254 /* Clear any false bus resets due to the transceivers settling */ 6255 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI); 6256 ahd_outb(ahd, CLRINT, CLRSCSIINT); 6257 6258 /* Initialize mode specific S/G state. */ 6259 for (i = 0; i < 2; i++) { 6260 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i); 6261 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 6262 ahd_outb(ahd, SG_STATE, 0); 6263 ahd_outb(ahd, CLRSEQINTSRC, 0xFF); 6264 ahd_outb(ahd, SEQIMODE, 6265 ENSAVEPTRS|ENCFG4DATA|ENCFG4ISTAT 6266 |ENCFG4TSTAT|ENCFG4ICMD|ENCFG4TCMD); 6267 } 6268 6269 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 6270 ahd_outb(ahd, DSCOMMAND0, ahd_inb(ahd, DSCOMMAND0)|MPARCKEN|CACHETHEN); 6271 ahd_outb(ahd, DFF_THRSH, RD_DFTHRSH_75|WR_DFTHRSH_75); 6272 ahd_outb(ahd, SIMODE0, ENIOERR|ENOVERRUN); 6273 ahd_outb(ahd, SIMODE3, ENNTRAMPERR|ENOSRAMPERR); 6274 if ((ahd->bugs & AHD_BUSFREEREV_BUG) != 0) { 6275 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|AUTO_MSGOUT_DE); 6276 } else { 6277 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|BUSFREEREV|AUTO_MSGOUT_DE); 6278 } 6279 ahd_outb(ahd, SCSCHKN, CURRFIFODEF|WIDERESEN|SHVALIDSTDIS); 6280 if ((ahd->chip & AHD_BUS_MASK) == AHD_PCIX) 6281 /* 6282 * Do not issue a target abort when a split completion 6283 * error occurs. Let our PCIX interrupt handler deal 6284 * with it instead. H2A4 Razor #625 6285 */ 6286 ahd_outb(ahd, PCIXCTL, ahd_inb(ahd, PCIXCTL) | SPLTSTADIS); 6287 6288 if ((ahd->bugs & AHD_LQOOVERRUN_BUG) != 0) 6289 ahd_outb(ahd, LQOSCSCTL, LQONOCHKOVER); 6290 6291 /* 6292 * Tweak IOCELL settings. 6293 */ 6294 if ((ahd->flags & AHD_HP_BOARD) != 0) { 6295 for (i = 0; i < NUMDSPS; i++) { 6296 ahd_outb(ahd, DSPSELECT, i); 6297 ahd_outb(ahd, WRTBIASCTL, WRTBIASCTL_HP_DEFAULT); 6298 } 6299 #ifdef AHD_DEBUG 6300 if ((ahd_debug & AHD_SHOW_MISC) != 0) 6301 printf("%s: WRTBIASCTL now 0x%x\n", ahd_name(ahd), 6302 WRTBIASCTL_HP_DEFAULT); 6303 #endif 6304 } 6305 ahd_setup_iocell_workaround(ahd); 6306 6307 /* 6308 * Enable LQI Manager interrupts. 6309 */ 6310 ahd_outb(ahd, LQIMODE1, ENLQIPHASE_LQ|ENLQIPHASE_NLQ|ENLIQABORT 6311 | ENLQICRCI_LQ|ENLQICRCI_NLQ|ENLQIBADLQI 6312 | ENLQIOVERI_LQ|ENLQIOVERI_NLQ); 6313 ahd_outb(ahd, LQOMODE0, ENLQOATNLQ|ENLQOATNPKT|ENLQOTCRC); 6314 /* 6315 * An interrupt from LQOBUSFREE is made redundant by the 6316 * BUSFREE interrupt. We choose to have the sequencer catch 6317 * LQOPHCHGINPKT errors manually for the command phase at the 6318 * start of a packetized selection case. 6319 ahd_outb(ahd, LQOMODE1, ENLQOBUSFREE|ENLQOPHACHGINPKT); 6320 */ 6321 ahd_outb(ahd, LQOMODE1, 0); 6322 6323 /* 6324 * Setup sequencer interrupt handlers. 6325 */ 6326 ahd_outw(ahd, INTVEC1_ADDR, ahd_resolve_seqaddr(ahd, LABEL_seq_isr)); 6327 ahd_outw(ahd, INTVEC2_ADDR, ahd_resolve_seqaddr(ahd, LABEL_timer_isr)); 6328 6329 /* 6330 * Setup SCB Offset registers. 6331 */ 6332 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) { 6333 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, 6334 pkt_long_lun)); 6335 } else { 6336 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, lun)); 6337 } 6338 ahd_outb(ahd, CMDLENPTR, offsetof(struct hardware_scb, cdb_len)); 6339 ahd_outb(ahd, ATTRPTR, offsetof(struct hardware_scb, task_attribute)); 6340 ahd_outb(ahd, FLAGPTR, offsetof(struct hardware_scb, task_management)); 6341 ahd_outb(ahd, CMDPTR, offsetof(struct hardware_scb, 6342 shared_data.idata.cdb)); 6343 ahd_outb(ahd, QNEXTPTR, 6344 offsetof(struct hardware_scb, next_hscb_busaddr)); 6345 ahd_outb(ahd, ABRTBITPTR, MK_MESSAGE_BIT_OFFSET); 6346 ahd_outb(ahd, ABRTBYTEPTR, offsetof(struct hardware_scb, control)); 6347 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) { 6348 ahd_outb(ahd, LUNLEN, 6349 sizeof(ahd->next_queued_hscb->pkt_long_lun) - 1); 6350 } else { 6351 ahd_outb(ahd, LUNLEN, LUNLEN_SINGLE_LEVEL_LUN); 6352 } 6353 ahd_outb(ahd, CDBLIMIT, SCB_CDB_LEN_PTR - 1); 6354 ahd_outb(ahd, MAXCMD, 0xFF); 6355 ahd_outb(ahd, SCBAUTOPTR, 6356 AUSCBPTR_EN | offsetof(struct hardware_scb, tag)); 6357 6358 /* We haven't been enabled for target mode yet. */ 6359 ahd_outb(ahd, MULTARGID, 0); 6360 ahd_outb(ahd, MULTARGID + 1, 0); 6361 6362 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6363 /* Initialize the negotiation table. */ 6364 if ((ahd->features & AHD_NEW_IOCELL_OPTS) == 0) { 6365 /* 6366 * Clear the spare bytes in the neg table to avoid 6367 * spurious parity errors. 6368 */ 6369 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6370 ahd_outb(ahd, NEGOADDR, target); 6371 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PER_DEV0); 6372 for (i = 0; i < AHD_NUM_PER_DEV_ANNEXCOLS; i++) 6373 ahd_outb(ahd, ANNEXDAT, 0); 6374 } 6375 } 6376 6377 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6378 struct ahd_devinfo devinfo; 6379 struct ahd_initiator_tinfo *tinfo; 6380 struct ahd_tmode_tstate *tstate; 6381 6382 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6383 target, &tstate); 6384 ahd_compile_devinfo(&devinfo, ahd->our_id, 6385 target, CAM_LUN_WILDCARD, 6386 'A', ROLE_INITIATOR); 6387 ahd_update_neg_table(ahd, &devinfo, &tinfo->curr); 6388 } 6389 6390 ahd_outb(ahd, CLRSINT3, NTRAMPERR|OSRAMPERR); 6391 ahd_outb(ahd, CLRINT, CLRSCSIINT); 6392 6393 #if NEEDS_MORE_TESTING 6394 /* 6395 * Always enable abort on incoming L_Qs if this feature is 6396 * supported. We use this to catch invalid SCB references. 6397 */ 6398 if ((ahd->bugs & AHD_ABORT_LQI_BUG) == 0) 6399 ahd_outb(ahd, LQCTL1, ABORTPENDING); 6400 else 6401 #endif 6402 ahd_outb(ahd, LQCTL1, 0); 6403 6404 /* All of our queues are empty */ 6405 ahd->qoutfifonext = 0; 6406 ahd->qoutfifonext_valid_tag = QOUTFIFO_ENTRY_VALID_LE; 6407 ahd_outb(ahd, QOUTFIFO_ENTRY_VALID_TAG, QOUTFIFO_ENTRY_VALID >> 8); 6408 for (i = 0; i < AHD_QOUT_SIZE; i++) 6409 ahd->qoutfifo[i] = 0; 6410 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_PREREAD); 6411 6412 ahd->qinfifonext = 0; 6413 for (i = 0; i < AHD_QIN_SIZE; i++) 6414 ahd->qinfifo[i] = SCB_LIST_NULL; 6415 6416 if ((ahd->features & AHD_TARGETMODE) != 0) { 6417 /* All target command blocks start out invalid. */ 6418 for (i = 0; i < AHD_TMODE_CMDS; i++) 6419 ahd->targetcmds[i].cmd_valid = 0; 6420 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_PREREAD); 6421 ahd->tqinfifonext = 1; 6422 ahd_outb(ahd, KERNEL_TQINPOS, ahd->tqinfifonext - 1); 6423 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext); 6424 } 6425 6426 /* Initialize Scratch Ram. */ 6427 ahd_outb(ahd, SEQ_FLAGS, 0); 6428 ahd_outb(ahd, SEQ_FLAGS2, 0); 6429 6430 /* We don't have any waiting selections */ 6431 ahd_outw(ahd, WAITING_TID_HEAD, SCB_LIST_NULL); 6432 ahd_outw(ahd, WAITING_TID_TAIL, SCB_LIST_NULL); 6433 for (i = 0; i < AHD_NUM_TARGETS; i++) { 6434 ahd_outw(ahd, WAITING_SCB_TAILS + (2 * i), SCB_LIST_NULL); 6435 } 6436 6437 /* 6438 * Nobody is waiting to be DMAed into the QOUTFIFO. 6439 */ 6440 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL); 6441 ahd_outw(ahd, COMPLETE_SCB_DMAINPROG_HEAD, SCB_LIST_NULL); 6442 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL); 6443 6444 /* 6445 * The Freeze Count is 0. 6446 */ 6447 ahd_outw(ahd, QFREEZE_COUNT, 0); 6448 6449 /* 6450 * Tell the sequencer where it can find our arrays in memory. 6451 */ 6452 busaddr = ahd->shared_data_map.physaddr; 6453 ahd_outb(ahd, SHARED_DATA_ADDR, busaddr & 0xFF); 6454 ahd_outb(ahd, SHARED_DATA_ADDR + 1, (busaddr >> 8) & 0xFF); 6455 ahd_outb(ahd, SHARED_DATA_ADDR + 2, (busaddr >> 16) & 0xFF); 6456 ahd_outb(ahd, SHARED_DATA_ADDR + 3, (busaddr >> 24) & 0xFF); 6457 ahd_outb(ahd, QOUTFIFO_NEXT_ADDR, busaddr & 0xFF); 6458 ahd_outb(ahd, QOUTFIFO_NEXT_ADDR + 1, (busaddr >> 8) & 0xFF); 6459 ahd_outb(ahd, QOUTFIFO_NEXT_ADDR + 2, (busaddr >> 16) & 0xFF); 6460 ahd_outb(ahd, QOUTFIFO_NEXT_ADDR + 3, (busaddr >> 24) & 0xFF); 6461 /* 6462 * Setup the allowed SCSI Sequences based on operational mode. 6463 * If we are a target, we'll enable select in operations once 6464 * we've had a lun enabled. 6465 */ 6466 scsiseq_template = ENAUTOATNP; 6467 if ((ahd->flags & AHD_INITIATORROLE) != 0) 6468 scsiseq_template |= ENRSELI; 6469 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq_template); 6470 6471 /* There are no busy SCBs yet. */ 6472 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6473 int lun; 6474 6475 for (lun = 0; lun < AHD_NUM_LUNS_NONPKT; lun++) 6476 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(target, 'A', lun)); 6477 } 6478 6479 /* 6480 * Initialize the group code to command length table. 6481 * Vendor Unique codes are set to 0 so we only capture 6482 * the first byte of the cdb. These can be overridden 6483 * when target mode is enabled. 6484 */ 6485 ahd_outb(ahd, CMDSIZE_TABLE, 5); 6486 ahd_outb(ahd, CMDSIZE_TABLE + 1, 9); 6487 ahd_outb(ahd, CMDSIZE_TABLE + 2, 9); 6488 ahd_outb(ahd, CMDSIZE_TABLE + 3, 0); 6489 ahd_outb(ahd, CMDSIZE_TABLE + 4, 15); 6490 ahd_outb(ahd, CMDSIZE_TABLE + 5, 11); 6491 ahd_outb(ahd, CMDSIZE_TABLE + 6, 0); 6492 ahd_outb(ahd, CMDSIZE_TABLE + 7, 0); 6493 6494 /* Tell the sequencer of our initial queue positions */ 6495 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 6496 ahd_outb(ahd, QOFF_CTLSTA, SCB_QSIZE_512); 6497 ahd->qinfifonext = 0; 6498 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 6499 ahd_set_hescb_qoff(ahd, 0); 6500 ahd_set_snscb_qoff(ahd, 0); 6501 ahd_set_sescb_qoff(ahd, 0); 6502 ahd_set_sdscb_qoff(ahd, 0); 6503 6504 /* 6505 * Tell the sequencer which SCB will be the next one it receives. 6506 */ 6507 busaddr = ahd_le32toh(ahd->next_queued_hscb->hscb_busaddr); 6508 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 0, busaddr & 0xFF); 6509 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 1, (busaddr >> 8) & 0xFF); 6510 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 2, (busaddr >> 16) & 0xFF); 6511 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 3, (busaddr >> 24) & 0xFF); 6512 6513 /* 6514 * Default to coalescing disabled. 6515 */ 6516 ahd_outw(ahd, INT_COALESCING_CMDCOUNT, 0); 6517 ahd_outw(ahd, CMDS_PENDING, 0); 6518 ahd_update_coalescing_values(ahd, ahd->int_coalescing_timer, 6519 ahd->int_coalescing_maxcmds, 6520 ahd->int_coalescing_mincmds); 6521 ahd_enable_coalescing(ahd, FALSE); 6522 6523 ahd_loadseq(ahd); 6524 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6525 } 6526 6527 /* 6528 * Setup default device and controller settings. 6529 * This should only be called if our probe has 6530 * determined that no configuration data is available. 6531 */ 6532 int 6533 ahd_default_config(struct ahd_softc *ahd) 6534 { 6535 int targ; 6536 6537 ahd->our_id = 7; 6538 6539 /* 6540 * Allocate a tstate to house information for our 6541 * initiator presence on the bus as well as the user 6542 * data for any target mode initiator. 6543 */ 6544 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) { 6545 printf("%s: unable to allocate ahd_tmode_tstate. " 6546 "Failing attach\n", ahd_name(ahd)); 6547 return (ENOMEM); 6548 } 6549 6550 for (targ = 0; targ < AHD_NUM_TARGETS; targ++) { 6551 struct ahd_devinfo devinfo; 6552 struct ahd_initiator_tinfo *tinfo; 6553 struct ahd_tmode_tstate *tstate; 6554 uint16_t target_mask; 6555 6556 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6557 targ, &tstate); 6558 /* 6559 * We support SPC2 and SPI4. 6560 */ 6561 tinfo->user.protocol_version = 4; 6562 tinfo->user.transport_version = 4; 6563 6564 target_mask = 0x01 << targ; 6565 ahd->user_discenable |= target_mask; 6566 tstate->discenable |= target_mask; 6567 ahd->user_tagenable |= target_mask; 6568 #ifdef AHD_FORCE_160 6569 tinfo->user.period = AHD_SYNCRATE_DT; 6570 #else 6571 tinfo->user.period = AHD_SYNCRATE_160; 6572 #endif 6573 tinfo->user.offset= MAX_OFFSET; 6574 tinfo->user.ppr_options = MSG_EXT_PPR_RDSTRM 6575 | MSG_EXT_PPR_WRFLOW 6576 | MSG_EXT_PPR_HOLDMCS 6577 | MSG_EXT_PPR_IU_REQ 6578 | MSG_EXT_PPR_QAS_REQ 6579 | MSG_EXT_PPR_DT_REQ; 6580 if ((ahd->features & AHD_RTI) != 0) 6581 tinfo->user.ppr_options |= MSG_EXT_PPR_RTI; 6582 6583 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT; 6584 6585 /* 6586 * Start out Async/Narrow/Untagged and with 6587 * conservative protocol support. 6588 */ 6589 tinfo->goal.protocol_version = 2; 6590 tinfo->goal.transport_version = 2; 6591 tinfo->curr.protocol_version = 2; 6592 tinfo->curr.transport_version = 2; 6593 ahd_compile_devinfo(&devinfo, ahd->our_id, 6594 targ, CAM_LUN_WILDCARD, 6595 'A', ROLE_INITIATOR); 6596 tstate->tagenable &= ~target_mask; 6597 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 6598 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); 6599 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0, 6600 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL, 6601 /*paused*/TRUE); 6602 } 6603 return (0); 6604 } 6605 6606 /* 6607 * Parse device configuration information. 6608 */ 6609 int 6610 ahd_parse_cfgdata(struct ahd_softc *ahd, struct seeprom_config *sc) 6611 { 6612 int targ; 6613 int max_targ; 6614 6615 max_targ = sc->max_targets & CFMAXTARG; 6616 ahd->our_id = sc->brtime_id & CFSCSIID; 6617 6618 /* 6619 * Allocate a tstate to house information for our 6620 * initiator presence on the bus as well as the user 6621 * data for any target mode initiator. 6622 */ 6623 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) { 6624 printf("%s: unable to allocate ahd_tmode_tstate. " 6625 "Failing attach\n", ahd_name(ahd)); 6626 return (ENOMEM); 6627 } 6628 6629 for (targ = 0; targ < max_targ; targ++) { 6630 struct ahd_devinfo devinfo; 6631 struct ahd_initiator_tinfo *tinfo; 6632 struct ahd_transinfo *user_tinfo; 6633 struct ahd_tmode_tstate *tstate; 6634 uint16_t target_mask; 6635 6636 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6637 targ, &tstate); 6638 user_tinfo = &tinfo->user; 6639 6640 /* 6641 * We support SPC2 and SPI4. 6642 */ 6643 tinfo->user.protocol_version = 4; 6644 tinfo->user.transport_version = 4; 6645 6646 target_mask = 0x01 << targ; 6647 ahd->user_discenable &= ~target_mask; 6648 tstate->discenable &= ~target_mask; 6649 ahd->user_tagenable &= ~target_mask; 6650 if (sc->device_flags[targ] & CFDISC) { 6651 tstate->discenable |= target_mask; 6652 ahd->user_discenable |= target_mask; 6653 ahd->user_tagenable |= target_mask; 6654 } else { 6655 /* 6656 * Cannot be packetized without disconnection. 6657 */ 6658 sc->device_flags[targ] &= ~CFPACKETIZED; 6659 } 6660 6661 user_tinfo->ppr_options = 0; 6662 user_tinfo->period = (sc->device_flags[targ] & CFXFER); 6663 if (user_tinfo->period < CFXFER_ASYNC) { 6664 if (user_tinfo->period <= AHD_PERIOD_10MHz) 6665 user_tinfo->ppr_options |= MSG_EXT_PPR_DT_REQ; 6666 user_tinfo->offset = MAX_OFFSET; 6667 } else { 6668 user_tinfo->offset = 0; 6669 user_tinfo->period = AHD_ASYNC_XFER_PERIOD; 6670 } 6671 #ifdef AHD_FORCE_160 6672 if (user_tinfo->period <= AHD_SYNCRATE_160) 6673 user_tinfo->period = AHD_SYNCRATE_DT; 6674 #endif 6675 6676 if ((sc->device_flags[targ] & CFPACKETIZED) != 0) { 6677 user_tinfo->ppr_options |= MSG_EXT_PPR_RDSTRM 6678 | MSG_EXT_PPR_WRFLOW 6679 | MSG_EXT_PPR_HOLDMCS 6680 | MSG_EXT_PPR_IU_REQ; 6681 if ((ahd->features & AHD_RTI) != 0) 6682 user_tinfo->ppr_options |= MSG_EXT_PPR_RTI; 6683 } 6684 6685 if ((sc->device_flags[targ] & CFQAS) != 0) 6686 user_tinfo->ppr_options |= MSG_EXT_PPR_QAS_REQ; 6687 6688 if ((sc->device_flags[targ] & CFWIDEB) != 0) 6689 user_tinfo->width = MSG_EXT_WDTR_BUS_16_BIT; 6690 else 6691 user_tinfo->width = MSG_EXT_WDTR_BUS_8_BIT; 6692 #ifdef AHD_DEBUG 6693 if ((ahd_debug & AHD_SHOW_MISC) != 0) 6694 printf("(%d): %x:%x:%x:%x\n", targ, user_tinfo->width, 6695 user_tinfo->period, user_tinfo->offset, 6696 user_tinfo->ppr_options); 6697 #endif 6698 /* 6699 * Start out Async/Narrow/Untagged and with 6700 * conservative protocol support. 6701 */ 6702 tstate->tagenable &= ~target_mask; 6703 tinfo->goal.protocol_version = 2; 6704 tinfo->goal.transport_version = 2; 6705 tinfo->curr.protocol_version = 2; 6706 tinfo->curr.transport_version = 2; 6707 ahd_compile_devinfo(&devinfo, ahd->our_id, 6708 targ, CAM_LUN_WILDCARD, 6709 'A', ROLE_INITIATOR); 6710 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 6711 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); 6712 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0, 6713 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL, 6714 /*paused*/TRUE); 6715 } 6716 6717 ahd->flags &= ~AHD_SPCHK_ENB_A; 6718 if (sc->bios_control & CFSPARITY) 6719 ahd->flags |= AHD_SPCHK_ENB_A; 6720 6721 ahd->flags &= ~AHD_RESET_BUS_A; 6722 if (sc->bios_control & CFRESETB) 6723 ahd->flags |= AHD_RESET_BUS_A; 6724 6725 ahd->flags &= ~AHD_EXTENDED_TRANS_A; 6726 if (sc->bios_control & CFEXTEND) 6727 ahd->flags |= AHD_EXTENDED_TRANS_A; 6728 6729 ahd->flags &= ~AHD_BIOS_ENABLED; 6730 if ((sc->bios_control & CFBIOSSTATE) == CFBS_ENABLED) 6731 ahd->flags |= AHD_BIOS_ENABLED; 6732 6733 ahd->flags &= ~AHD_STPWLEVEL_A; 6734 if ((sc->adapter_control & CFSTPWLEVEL) != 0) 6735 ahd->flags |= AHD_STPWLEVEL_A; 6736 6737 return (0); 6738 } 6739 6740 /* 6741 * Parse device configuration information. 6742 */ 6743 int 6744 ahd_parse_vpddata(struct ahd_softc *ahd, struct vpd_config *vpd) 6745 { 6746 int error; 6747 6748 error = ahd_verify_vpd_cksum(vpd); 6749 if (error == 0) 6750 return (EINVAL); 6751 if ((vpd->bios_flags & VPDBOOTHOST) != 0) 6752 ahd->flags |= AHD_BOOT_CHANNEL; 6753 return (0); 6754 } 6755 6756 void 6757 ahd_intr_enable(struct ahd_softc *ahd, int enable) 6758 { 6759 u_int hcntrl; 6760 6761 hcntrl = ahd_inb(ahd, HCNTRL); 6762 hcntrl &= ~INTEN; 6763 ahd->pause &= ~INTEN; 6764 ahd->unpause &= ~INTEN; 6765 if (enable) { 6766 hcntrl |= INTEN; 6767 ahd->pause |= INTEN; 6768 ahd->unpause |= INTEN; 6769 } 6770 ahd_outb(ahd, HCNTRL, hcntrl); 6771 } 6772 6773 void 6774 ahd_update_coalescing_values(struct ahd_softc *ahd, u_int timer, u_int maxcmds, 6775 u_int mincmds) 6776 { 6777 if (timer > AHD_TIMER_MAX_US) 6778 timer = AHD_TIMER_MAX_US; 6779 ahd->int_coalescing_timer = timer; 6780 6781 if (maxcmds > AHD_INT_COALESCING_MAXCMDS_MAX) 6782 maxcmds = AHD_INT_COALESCING_MAXCMDS_MAX; 6783 if (mincmds > AHD_INT_COALESCING_MINCMDS_MAX) 6784 mincmds = AHD_INT_COALESCING_MINCMDS_MAX; 6785 ahd->int_coalescing_maxcmds = maxcmds; 6786 ahd_outw(ahd, INT_COALESCING_TIMER, timer / AHD_TIMER_US_PER_TICK); 6787 ahd_outb(ahd, INT_COALESCING_MAXCMDS, -maxcmds); 6788 ahd_outb(ahd, INT_COALESCING_MINCMDS, -mincmds); 6789 } 6790 6791 void 6792 ahd_enable_coalescing(struct ahd_softc *ahd, int enable) 6793 { 6794 6795 ahd->hs_mailbox &= ~ENINT_COALESCE; 6796 if (enable) 6797 ahd->hs_mailbox |= ENINT_COALESCE; 6798 ahd_outb(ahd, HS_MAILBOX, ahd->hs_mailbox); 6799 ahd_flush_device_writes(ahd); 6800 ahd_run_qoutfifo(ahd); 6801 } 6802 6803 /* 6804 * Ensure that the card is paused in a location 6805 * outside of all critical sections and that all 6806 * pending work is completed prior to returning. 6807 * This routine should only be called from outside 6808 * an interrupt context. 6809 */ 6810 void 6811 ahd_pause_and_flushwork(struct ahd_softc *ahd) 6812 { 6813 u_int intstat; 6814 u_int maxloops; 6815 u_int qfreeze_cnt; 6816 6817 maxloops = 1000; 6818 ahd->flags |= AHD_ALL_INTERRUPTS; 6819 ahd_pause(ahd); 6820 /* 6821 * Increment the QFreeze Count so that the sequencer 6822 * will not start new selections. We do this only 6823 * until we are safely paused without further selections 6824 * pending. 6825 */ 6826 ahd_outw(ahd, QFREEZE_COUNT, ahd_inw(ahd, QFREEZE_COUNT) + 1); 6827 ahd_outb(ahd, SEQ_FLAGS2, ahd_inb(ahd, SEQ_FLAGS2) | SELECTOUT_QFROZEN); 6828 do { 6829 struct scb *waiting_scb; 6830 6831 ahd_unpause(ahd); 6832 ahd_intr(ahd); 6833 ahd_pause(ahd); 6834 ahd_clear_critical_section(ahd); 6835 intstat = ahd_inb(ahd, INTSTAT); 6836 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6837 if ((ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) == 0) 6838 ahd_outb(ahd, SCSISEQ0, 6839 ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 6840 /* 6841 * In the non-packetized case, the sequencer (for Rev A), 6842 * relies on ENSELO remaining set after SELDO. The hardware 6843 * auto-clears ENSELO in the packetized case. 6844 */ 6845 waiting_scb = ahd_lookup_scb(ahd, 6846 ahd_inw(ahd, WAITING_TID_HEAD)); 6847 if (waiting_scb != NULL 6848 && (waiting_scb->flags & SCB_PACKETIZED) == 0 6849 && (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) != 0) 6850 ahd_outb(ahd, SCSISEQ0, 6851 ahd_inb(ahd, SCSISEQ0) | ENSELO); 6852 } while (--maxloops 6853 && (intstat != 0xFF || (ahd->features & AHD_REMOVABLE) == 0) 6854 && ((intstat & INT_PEND) != 0 6855 || (ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0 6856 || (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) != 0)); 6857 if (maxloops == 0) { 6858 printf("Infinite interrupt loop, INTSTAT = %x", 6859 ahd_inb(ahd, INTSTAT)); 6860 } 6861 qfreeze_cnt = ahd_inw(ahd, QFREEZE_COUNT); 6862 if (qfreeze_cnt == 0) { 6863 printf("%s: ahd_pause_and_flushwork with 0 qfreeze count!\n", 6864 ahd_name(ahd)); 6865 } else { 6866 qfreeze_cnt--; 6867 } 6868 ahd_outw(ahd, QFREEZE_COUNT, qfreeze_cnt); 6869 if (qfreeze_cnt == 0) 6870 ahd_outb(ahd, SEQ_FLAGS2, 6871 ahd_inb(ahd, SEQ_FLAGS2) & ~SELECTOUT_QFROZEN); 6872 6873 ahd_flush_qoutfifo(ahd); 6874 6875 ahd_platform_flushwork(ahd); 6876 ahd->flags &= ~AHD_ALL_INTERRUPTS; 6877 } 6878 6879 int 6880 ahd_suspend(struct ahd_softc *ahd) 6881 { 6882 6883 ahd_pause_and_flushwork(ahd); 6884 6885 if (LIST_FIRST(&ahd->pending_scbs) != NULL) { 6886 ahd_unpause(ahd); 6887 return (EBUSY); 6888 } 6889 ahd_shutdown(ahd); 6890 return (0); 6891 } 6892 6893 int 6894 ahd_resume(struct ahd_softc *ahd) 6895 { 6896 6897 ahd_reset(ahd, /*reinit*/TRUE); 6898 ahd_intr_enable(ahd, TRUE); 6899 ahd_restart(ahd); 6900 return (0); 6901 } 6902 6903 /************************** Busy Target Table *********************************/ 6904 /* 6905 * Set SCBPTR to the SCB that contains the busy 6906 * table entry for TCL. Return the offset into 6907 * the SCB that contains the entry for TCL. 6908 * saved_scbid is dereferenced and set to the 6909 * scbid that should be restored once manipualtion 6910 * of the TCL entry is complete. 6911 */ 6912 static __inline u_int 6913 ahd_index_busy_tcl(struct ahd_softc *ahd, u_int *saved_scbid, u_int tcl) 6914 { 6915 /* 6916 * Index to the SCB that contains the busy entry. 6917 */ 6918 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 6919 *saved_scbid = ahd_get_scbptr(ahd); 6920 ahd_set_scbptr(ahd, TCL_LUN(tcl) 6921 | ((TCL_TARGET_OFFSET(tcl) & 0xC) << 4)); 6922 6923 /* 6924 * And now calculate the SCB offset to the entry. 6925 * Each entry is 2 bytes wide, hence the 6926 * multiplication by 2. 6927 */ 6928 return (((TCL_TARGET_OFFSET(tcl) & 0x3) << 1) + SCB_DISCONNECTED_LISTS); 6929 } 6930 6931 /* 6932 * Return the untagged transaction id for a given target/channel lun. 6933 */ 6934 u_int 6935 ahd_find_busy_tcl(struct ahd_softc *ahd, u_int tcl) 6936 { 6937 u_int scbid; 6938 u_int scb_offset; 6939 u_int saved_scbptr; 6940 6941 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl); 6942 scbid = ahd_inw_scbram(ahd, scb_offset); 6943 ahd_set_scbptr(ahd, saved_scbptr); 6944 return (scbid); 6945 } 6946 6947 void 6948 ahd_busy_tcl(struct ahd_softc *ahd, u_int tcl, u_int scbid) 6949 { 6950 u_int scb_offset; 6951 u_int saved_scbptr; 6952 6953 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl); 6954 ahd_outw(ahd, scb_offset, scbid); 6955 ahd_set_scbptr(ahd, saved_scbptr); 6956 } 6957 6958 /************************** SCB and SCB queue management **********************/ 6959 int 6960 ahd_match_scb(struct ahd_softc *ahd, struct scb *scb, int target, 6961 char channel, int lun, u_int tag, role_t role) 6962 { 6963 int targ = SCB_GET_TARGET(ahd, scb); 6964 char chan = SCB_GET_CHANNEL(ahd, scb); 6965 int slun = SCB_GET_LUN(scb); 6966 int match; 6967 6968 match = ((chan == channel) || (channel == ALL_CHANNELS)); 6969 if (match != 0) 6970 match = ((targ == target) || (target == CAM_TARGET_WILDCARD)); 6971 if (match != 0) 6972 match = ((lun == slun) || (lun == CAM_LUN_WILDCARD)); 6973 if (match != 0) { 6974 #if AHD_TARGET_MODE 6975 int group; 6976 6977 group = XPT_FC_GROUP(scb->io_ctx->ccb_h.func_code); 6978 if (role == ROLE_INITIATOR) { 6979 match = (group != XPT_FC_GROUP_TMODE) 6980 && ((tag == SCB_GET_TAG(scb)) 6981 || (tag == SCB_LIST_NULL)); 6982 } else if (role == ROLE_TARGET) { 6983 match = (group == XPT_FC_GROUP_TMODE) 6984 && ((tag == scb->io_ctx->csio.tag_id) 6985 || (tag == SCB_LIST_NULL)); 6986 } 6987 #else /* !AHD_TARGET_MODE */ 6988 match = ((tag == SCB_GET_TAG(scb)) || (tag == SCB_LIST_NULL)); 6989 #endif /* AHD_TARGET_MODE */ 6990 } 6991 6992 return match; 6993 } 6994 6995 void 6996 ahd_freeze_devq(struct ahd_softc *ahd, struct scb *scb) 6997 { 6998 int target; 6999 char channel; 7000 int lun; 7001 7002 target = SCB_GET_TARGET(ahd, scb); 7003 lun = SCB_GET_LUN(scb); 7004 channel = SCB_GET_CHANNEL(ahd, scb); 7005 7006 ahd_search_qinfifo(ahd, target, channel, lun, 7007 /*tag*/SCB_LIST_NULL, ROLE_UNKNOWN, 7008 CAM_REQUEUE_REQ, SEARCH_COMPLETE); 7009 7010 ahd_platform_freeze_devq(ahd, scb); 7011 } 7012 7013 void 7014 ahd_qinfifo_requeue_tail(struct ahd_softc *ahd, struct scb *scb) 7015 { 7016 struct scb *prev_scb; 7017 ahd_mode_state saved_modes; 7018 7019 saved_modes = ahd_save_modes(ahd); 7020 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7021 prev_scb = NULL; 7022 if (ahd_qinfifo_count(ahd) != 0) { 7023 u_int prev_tag; 7024 u_int prev_pos; 7025 7026 prev_pos = AHD_QIN_WRAP(ahd->qinfifonext - 1); 7027 prev_tag = ahd->qinfifo[prev_pos]; 7028 prev_scb = ahd_lookup_scb(ahd, prev_tag); 7029 } 7030 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7031 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 7032 ahd_restore_modes(ahd, saved_modes); 7033 } 7034 7035 static void 7036 ahd_qinfifo_requeue(struct ahd_softc *ahd, struct scb *prev_scb, 7037 struct scb *scb) 7038 { 7039 if (prev_scb == NULL) { 7040 uint32_t busaddr; 7041 7042 busaddr = ahd_le32toh(scb->hscb->hscb_busaddr); 7043 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 0, busaddr & 0xFF); 7044 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 1, (busaddr >> 8) & 0xFF); 7045 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 2, (busaddr >> 16) & 0xFF); 7046 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 3, (busaddr >> 24) & 0xFF); 7047 } else { 7048 prev_scb->hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr; 7049 ahd_sync_scb(ahd, prev_scb, 7050 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 7051 } 7052 ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb); 7053 ahd->qinfifonext++; 7054 scb->hscb->next_hscb_busaddr = ahd->next_queued_hscb->hscb_busaddr; 7055 ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 7056 } 7057 7058 static int 7059 ahd_qinfifo_count(struct ahd_softc *ahd) 7060 { 7061 u_int qinpos; 7062 u_int wrap_qinpos; 7063 u_int wrap_qinfifonext; 7064 7065 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 7066 qinpos = ahd_get_snscb_qoff(ahd); 7067 wrap_qinpos = AHD_QIN_WRAP(qinpos); 7068 wrap_qinfifonext = AHD_QIN_WRAP(ahd->qinfifonext); 7069 if (wrap_qinfifonext >= wrap_qinpos) 7070 return (wrap_qinfifonext - wrap_qinpos); 7071 else 7072 return (wrap_qinfifonext 7073 + NUM_ELEMENTS(ahd->qinfifo) - wrap_qinpos); 7074 } 7075 7076 void 7077 ahd_reset_cmds_pending(struct ahd_softc *ahd) 7078 { 7079 struct scb *scb; 7080 ahd_mode_state saved_modes; 7081 u_int pending_cmds; 7082 7083 saved_modes = ahd_save_modes(ahd); 7084 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7085 7086 /* 7087 * Don't count any commands as outstanding that the 7088 * sequencer has already marked for completion. 7089 */ 7090 ahd_flush_qoutfifo(ahd); 7091 7092 pending_cmds = 0; 7093 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 7094 pending_cmds++; 7095 } 7096 ahd_outw(ahd, CMDS_PENDING, pending_cmds - ahd_qinfifo_count(ahd)); 7097 ahd_restore_modes(ahd, saved_modes); 7098 ahd->flags &= ~AHD_UPDATE_PEND_CMDS; 7099 } 7100 7101 int 7102 ahd_search_qinfifo(struct ahd_softc *ahd, int target, char channel, 7103 int lun, u_int tag, role_t role, uint32_t status, 7104 ahd_search_action action) 7105 { 7106 struct scb *scb; 7107 struct scb *prev_scb; 7108 ahd_mode_state saved_modes; 7109 u_int qinstart; 7110 u_int qinpos; 7111 u_int qintail; 7112 u_int tid_next; 7113 u_int tid_prev; 7114 u_int scbid; 7115 u_int savedscbptr; 7116 uint32_t busaddr; 7117 int found; 7118 int targets; 7119 int pending_cmds; 7120 int qincount; 7121 7122 /* Must be in CCHAN mode */ 7123 saved_modes = ahd_save_modes(ahd); 7124 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7125 7126 /* 7127 * Halt any pending SCB DMA. The sequencer will reinitiate 7128 * this DMA if the qinfifo is not empty once we unpause. 7129 */ 7130 if ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN|CCSCBDIR)) 7131 == (CCARREN|CCSCBEN|CCSCBDIR)) { 7132 ahd_outb(ahd, CCSCBCTL, 7133 ahd_inb(ahd, CCSCBCTL) & ~(CCARREN|CCSCBEN)); 7134 while ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN)) != 0) 7135 ; 7136 } 7137 /* Determine sequencer's position in the qinfifo. */ 7138 qintail = AHD_QIN_WRAP(ahd->qinfifonext); 7139 qinstart = ahd_get_snscb_qoff(ahd); 7140 qinpos = AHD_QIN_WRAP(qinstart); 7141 found = 0; 7142 prev_scb = NULL; 7143 7144 pending_cmds = 0; 7145 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 7146 pending_cmds++; 7147 } 7148 qincount = ahd_qinfifo_count(ahd); 7149 7150 if (action == SEARCH_PRINT) { 7151 printf("qinstart = 0x%x qinfifonext = 0x%x\n", 7152 qinstart, ahd->qinfifonext); 7153 } 7154 7155 /* 7156 * Start with an empty queue. Entries that are not chosen 7157 * for removal will be re-added to the queue as we go. 7158 */ 7159 ahd->qinfifonext = qinstart; 7160 busaddr = ahd_le32toh(ahd->next_queued_hscb->hscb_busaddr); 7161 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 0, busaddr & 0xFF); 7162 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 1, (busaddr >> 8) & 0xFF); 7163 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 2, (busaddr >> 16) & 0xFF); 7164 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 3, (busaddr >> 24) & 0xFF); 7165 7166 while (qinpos != qintail) { 7167 scb = ahd_lookup_scb(ahd, ahd->qinfifo[qinpos]); 7168 if (scb == NULL) { 7169 panic("Loop 1\n"); 7170 } 7171 7172 if (ahd_match_scb(ahd, scb, target, channel, lun, tag, role)) { 7173 /* 7174 * We found an scb that needs to be acted on. 7175 */ 7176 found++; 7177 switch (action) { 7178 case SEARCH_COMPLETE: 7179 { 7180 cam_status ostat; 7181 cam_status cstat; 7182 7183 ostat = ahd_get_scsi_status(scb); 7184 if (ostat == CAM_REQ_INPROG) 7185 ahd_set_scsi_status(scb, status); 7186 cstat = ahd_get_transaction_status(scb); 7187 if (cstat != CAM_REQ_CMP) 7188 ahd_freeze_scb(scb); 7189 if ((scb->flags & SCB_ACTIVE) == 0) 7190 printf("Inactive SCB in qinfifo\n"); 7191 if (scb->xs->error != CAM_REQ_CMP) 7192 printf("SEARCH_COMPLETE(0x%x): ostat 0x%x, cstat 0x%x, xs_error 0x%x\n", 7193 SCB_GET_TAG(scb), ostat, cstat, scb->xs->error); 7194 ahd_done(ahd, scb); 7195 7196 /* FALLTHROUGH */ 7197 } 7198 case SEARCH_REMOVE: 7199 break; 7200 case SEARCH_PRINT: 7201 printf(" 0x%x", ahd->qinfifo[qinpos]); 7202 /* FALLTHROUGH */ 7203 case SEARCH_COUNT: 7204 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7205 prev_scb = scb; 7206 break; 7207 } 7208 } else { 7209 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7210 prev_scb = scb; 7211 } 7212 qinpos = AHD_QIN_WRAP(qinpos+1); 7213 } 7214 7215 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 7216 7217 if (action == SEARCH_PRINT) 7218 printf("\nWAITING_TID_QUEUES:\n"); 7219 7220 /* 7221 * Search waiting for selection lists. We traverse the 7222 * list of "their ids" waiting for selection and, if 7223 * appropriate, traverse the SCBs of each "their id" 7224 * looking for matches. 7225 */ 7226 savedscbptr = ahd_get_scbptr(ahd); 7227 tid_next = ahd_inw(ahd, WAITING_TID_HEAD); 7228 tid_prev = SCB_LIST_NULL; 7229 targets = 0; 7230 for (scbid = tid_next; !SCBID_IS_NULL(scbid); scbid = tid_next) { 7231 u_int tid_head; 7232 7233 /* 7234 * We limit based on the number of SCBs since 7235 * MK_MESSAGE SCBs are not in the per-tid lists. 7236 */ 7237 targets++; 7238 if (targets > AHD_SCB_MAX) { 7239 panic("TID LIST LOOP"); 7240 } 7241 if (scbid >= ahd->scb_data.numscbs) { 7242 printf("%s: Waiting TID List inconsistency. " 7243 "SCB index == 0x%x, yet numscbs == 0x%x.", 7244 ahd_name(ahd), scbid, ahd->scb_data.numscbs); 7245 ahd_dump_card_state(ahd); 7246 panic("for safety"); 7247 } 7248 scb = ahd_lookup_scb(ahd, scbid); 7249 if (scb == NULL) { 7250 printf("%s: SCB = 0x%x Not Active!\n", 7251 ahd_name(ahd), scbid); 7252 panic("Waiting TID List traversal\n"); 7253 break; 7254 } 7255 ahd_set_scbptr(ahd, scbid); 7256 tid_next = ahd_inw_scbram(ahd, SCB_NEXT2); 7257 if (ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD, 7258 SCB_LIST_NULL, ROLE_UNKNOWN) == 0) { 7259 tid_prev = scbid; 7260 continue; 7261 } 7262 7263 /* 7264 * We found a list of scbs that needs to be searched. 7265 */ 7266 if (action == SEARCH_PRINT) 7267 printf(" %d ( ", SCB_GET_TARGET(ahd, scb)); 7268 tid_head = scbid; 7269 found += ahd_search_scb_list(ahd, target, channel, 7270 lun, tag, role, status, 7271 action, &tid_head, 7272 SCB_GET_TARGET(ahd, scb)); 7273 if (tid_head != scbid) 7274 ahd_stitch_tid_list(ahd, tid_prev, tid_head, tid_next); 7275 if (!SCBID_IS_NULL(tid_head)) 7276 tid_prev = tid_head; 7277 if (action == SEARCH_PRINT) 7278 printf(")\n"); 7279 } 7280 ahd_set_scbptr(ahd, savedscbptr); 7281 ahd_restore_modes(ahd, saved_modes); 7282 return (found); 7283 } 7284 7285 static int 7286 ahd_search_scb_list(struct ahd_softc *ahd, int target, char channel, 7287 int lun, u_int tag, role_t role, uint32_t status, 7288 ahd_search_action action, u_int *list_head, u_int tid) 7289 { 7290 struct scb *scb; 7291 u_int scbid; 7292 u_int next; 7293 u_int prev; 7294 int found; 7295 7296 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 7297 found = 0; 7298 prev = SCB_LIST_NULL; 7299 next = *list_head; 7300 for (scbid = next; !SCBID_IS_NULL(scbid); scbid = next) { 7301 if (scbid >= ahd->scb_data.numscbs) { 7302 printf("%s:SCB List inconsistency. " 7303 "SCB == 0x%x, yet numscbs == 0x%x.", 7304 ahd_name(ahd), scbid, ahd->scb_data.numscbs); 7305 ahd_dump_card_state(ahd); 7306 panic("for safety"); 7307 } 7308 scb = ahd_lookup_scb(ahd, scbid); 7309 if (scb == NULL) { 7310 printf("%s: SCB = %d Not Active!\n", 7311 ahd_name(ahd), scbid); 7312 panic("Waiting List traversal\n"); 7313 } 7314 ahd_set_scbptr(ahd, scbid); 7315 next = ahd_inw_scbram(ahd, SCB_NEXT); 7316 if (ahd_match_scb(ahd, scb, target, channel, 7317 lun, SCB_LIST_NULL, role) == 0) { 7318 prev = scbid; 7319 continue; 7320 } 7321 found++; 7322 switch (action) { 7323 case SEARCH_COMPLETE: 7324 { 7325 cam_status ostat; 7326 cam_status cstat; 7327 7328 ostat = ahd_get_scsi_status(scb); 7329 if (ostat == CAM_REQ_INPROG) 7330 ahd_set_scsi_status(scb, status); 7331 cstat = ahd_get_transaction_status(scb); 7332 if (cstat != CAM_REQ_CMP) 7333 ahd_freeze_scb(scb); 7334 if ((scb->flags & SCB_ACTIVE) == 0) 7335 printf("Inactive SCB in Waiting List\n"); 7336 ahd_done(ahd, scb); 7337 /* FALLTHROUGH */ 7338 } 7339 case SEARCH_REMOVE: 7340 ahd_rem_wscb(ahd, scbid, prev, next, tid); 7341 if (prev == SCB_LIST_NULL) 7342 *list_head = next; 7343 break; 7344 case SEARCH_PRINT: 7345 printf("0x%x ", scbid); 7346 case SEARCH_COUNT: 7347 prev = scbid; 7348 break; 7349 } 7350 if (found > AHD_SCB_MAX) 7351 panic("SCB LIST LOOP"); 7352 } 7353 if (action == SEARCH_COMPLETE 7354 || action == SEARCH_REMOVE) 7355 ahd_outw(ahd, CMDS_PENDING, ahd_inw(ahd, CMDS_PENDING) - found); 7356 return (found); 7357 } 7358 7359 static void 7360 ahd_stitch_tid_list(struct ahd_softc *ahd, u_int tid_prev, 7361 u_int tid_cur, u_int tid_next) 7362 { 7363 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 7364 7365 if (SCBID_IS_NULL(tid_cur)) { 7366 7367 /* Bypass current TID list */ 7368 if (SCBID_IS_NULL(tid_prev)) { 7369 ahd_outw(ahd, WAITING_TID_HEAD, tid_next); 7370 } else { 7371 ahd_set_scbptr(ahd, tid_prev); 7372 ahd_outw(ahd, SCB_NEXT2, tid_next); 7373 } 7374 if (SCBID_IS_NULL(tid_next)) 7375 ahd_outw(ahd, WAITING_TID_TAIL, tid_prev); 7376 } else { 7377 7378 /* Stitch through tid_cur */ 7379 if (SCBID_IS_NULL(tid_prev)) { 7380 ahd_outw(ahd, WAITING_TID_HEAD, tid_cur); 7381 } else { 7382 ahd_set_scbptr(ahd, tid_prev); 7383 ahd_outw(ahd, SCB_NEXT2, tid_cur); 7384 } 7385 ahd_set_scbptr(ahd, tid_cur); 7386 ahd_outw(ahd, SCB_NEXT2, tid_next); 7387 7388 if (SCBID_IS_NULL(tid_next)) 7389 ahd_outw(ahd, WAITING_TID_TAIL, tid_cur); 7390 } 7391 } 7392 7393 /* 7394 * Manipulate the waiting for selection list and return the 7395 * scb that follows the one that we remove. 7396 */ 7397 static u_int 7398 ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid, 7399 u_int prev, u_int next, u_int tid) 7400 { 7401 u_int tail_offset; 7402 7403 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 7404 if (!SCBID_IS_NULL(prev)) { 7405 ahd_set_scbptr(ahd, prev); 7406 ahd_outw(ahd, SCB_NEXT, next); 7407 } 7408 7409 /* 7410 * SCBs that had MK_MESSAGE set in them will not 7411 * be queued to the per-target lists, so don't 7412 * blindly clear the tail pointer. 7413 */ 7414 tail_offset = WAITING_SCB_TAILS + (2 * tid); 7415 if (SCBID_IS_NULL(next) 7416 && ahd_inw(ahd, tail_offset) == scbid) 7417 ahd_outw(ahd, tail_offset, prev); 7418 ahd_add_scb_to_free_list(ahd, scbid); 7419 return (next); 7420 } 7421 7422 /* 7423 * Add the SCB as selected by SCBPTR onto the on chip list of 7424 * free hardware SCBs. This list is empty/unused if we are not 7425 * performing SCB paging. 7426 */ 7427 static void 7428 ahd_add_scb_to_free_list(struct ahd_softc *ahd, u_int scbid) 7429 { 7430 /* XXX Need some other mechanism to designate "free". */ 7431 /* 7432 * Invalidate the tag so that our abort 7433 * routines don't think it's active. 7434 ahd_outb(ahd, SCB_TAG, SCB_LIST_NULL); 7435 */ 7436 } 7437 7438 /******************************** Error Handling ******************************/ 7439 /* 7440 * Abort all SCBs that match the given description (target/channel/lun/tag), 7441 * setting their status to the passed in status if the status has not already 7442 * been modified from CAM_REQ_INPROG. This routine assumes that the sequencer 7443 * is paused before it is called. 7444 */ 7445 int 7446 ahd_abort_scbs(struct ahd_softc *ahd, int target, char channel, 7447 int lun, u_int tag, role_t role, uint32_t status) 7448 { 7449 struct scb *scbp; 7450 struct scb *scbp_next; 7451 u_int i, j; 7452 u_int maxtarget; 7453 u_int minlun; 7454 u_int maxlun; 7455 int found; 7456 ahd_mode_state saved_modes; 7457 7458 /* restore this when we're done */ 7459 saved_modes = ahd_save_modes(ahd); 7460 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7461 7462 found = ahd_search_qinfifo(ahd, target, channel, lun, SCB_LIST_NULL, 7463 role, CAM_REQUEUE_REQ, SEARCH_COMPLETE); 7464 7465 /* 7466 * Clean out the busy target table for any untagged commands. 7467 */ 7468 i = 0; 7469 maxtarget = 16; 7470 if (target != CAM_TARGET_WILDCARD) { 7471 i = target; 7472 if (channel == 'B') 7473 i += 8; 7474 maxtarget = i + 1; 7475 } 7476 7477 if (lun == CAM_LUN_WILDCARD) { 7478 minlun = 0; 7479 maxlun = AHD_NUM_LUNS_NONPKT; 7480 } else if (lun >= AHD_NUM_LUNS_NONPKT) { 7481 minlun = maxlun = 0; 7482 } else { 7483 minlun = lun; 7484 maxlun = lun + 1; 7485 } 7486 7487 if (role != ROLE_TARGET) { 7488 for (;i < maxtarget; i++) { 7489 for (j = minlun;j < maxlun; j++) { 7490 u_int scbid; 7491 u_int tcl; 7492 7493 tcl = BUILD_TCL_RAW(i, 'A', j); 7494 scbid = ahd_find_busy_tcl(ahd, tcl); 7495 scbp = ahd_lookup_scb(ahd, scbid); 7496 if (scbp == NULL 7497 || ahd_match_scb(ahd, scbp, target, channel, 7498 lun, tag, role) == 0) 7499 continue; 7500 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(i, 'A', j)); 7501 } 7502 } 7503 } 7504 7505 /* 7506 * Don't abort commands that have already completed, 7507 * but haven't quite made it up to the host yet. 7508 */ 7509 ahd_flush_qoutfifo(ahd); 7510 7511 /* 7512 * Go through the pending CCB list and look for 7513 * commands for this target that are still active. 7514 * These are other tagged commands that were 7515 * disconnected when the reset occurred. 7516 */ 7517 scbp_next = LIST_FIRST(&ahd->pending_scbs); 7518 while (scbp_next != NULL) { 7519 scbp = scbp_next; 7520 scbp_next = LIST_NEXT(scbp, pending_links); 7521 if (ahd_match_scb(ahd, scbp, target, channel, lun, tag, role)) { 7522 cam_status ostat; 7523 7524 ostat = ahd_get_scsi_status(scbp); 7525 if (ostat == CAM_REQ_INPROG) 7526 ahd_set_scsi_status(scbp, status); 7527 if (ahd_get_transaction_status(scbp) != CAM_REQ_CMP) 7528 ahd_freeze_scb(scbp); 7529 if ((scbp->flags & SCB_ACTIVE) == 0) 7530 printf("Inactive SCB on pending list\n"); 7531 ahd_done(ahd, scbp); 7532 found++; 7533 } 7534 } 7535 ahd_restore_modes(ahd, saved_modes); 7536 ahd_platform_abort_scbs(ahd, target, channel, lun, tag, role, status); 7537 ahd->flags |= AHD_UPDATE_PEND_CMDS; 7538 return found; 7539 } 7540 7541 static void 7542 ahd_reset_current_bus(struct ahd_softc *ahd) 7543 { 7544 uint8_t scsiseq; 7545 7546 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7547 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) & ~ENSCSIRST); 7548 scsiseq = ahd_inb(ahd, SCSISEQ0) & ~(ENSELO|ENARBO|SCSIRSTO); 7549 ahd_outb(ahd, SCSISEQ0, scsiseq | SCSIRSTO); 7550 ahd_flush_device_writes(ahd); 7551 ahd_delay(AHD_BUSRESET_DELAY); 7552 /* Turn off the bus reset */ 7553 ahd_outb(ahd, SCSISEQ0, scsiseq); 7554 ahd_flush_device_writes(ahd); 7555 ahd_delay(AHD_BUSRESET_DELAY); 7556 if ((ahd->bugs & AHD_SCSIRST_BUG) != 0) { 7557 /* 7558 * 2A Razor #474 7559 * Certain chip state is not cleared for 7560 * SCSI bus resets that we initiate, so 7561 * we must reset the chip. 7562 */ 7563 ahd_reset(ahd, /*reinit*/TRUE); 7564 ahd_intr_enable(ahd, /*enable*/TRUE); 7565 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7566 } 7567 7568 ahd_clear_intstat(ahd); 7569 } 7570 7571 int 7572 ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset) 7573 { 7574 struct ahd_devinfo devinfo; 7575 u_int initiator; 7576 u_int target; 7577 u_int max_scsiid; 7578 int found; 7579 u_int fifo; 7580 u_int next_fifo; 7581 7582 7583 ahd->pending_device = NULL; 7584 7585 ahd_compile_devinfo(&devinfo, 7586 CAM_TARGET_WILDCARD, 7587 CAM_TARGET_WILDCARD, 7588 CAM_LUN_WILDCARD, 7589 channel, ROLE_UNKNOWN); 7590 ahd_pause(ahd); 7591 7592 /* Make sure the sequencer is in a safe location. */ 7593 ahd_clear_critical_section(ahd); 7594 7595 #if AHD_TARGET_MODE 7596 if ((ahd->flags & AHD_TARGETROLE) != 0) { 7597 ahd_run_tqinfifo(ahd, /*paused*/TRUE); 7598 } 7599 #endif 7600 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7601 7602 /* 7603 * Disable selections so no automatic hardware 7604 * functions will modify chip state. 7605 */ 7606 ahd_outb(ahd, SCSISEQ0, 0); 7607 ahd_outb(ahd, SCSISEQ1, 0); 7608 7609 /* 7610 * Safely shut down our DMA engines. Always start with 7611 * the FIFO that is not currently active (if any are 7612 * actively connected). 7613 */ 7614 next_fifo = fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO; 7615 if (next_fifo > CURRFIFO_1) 7616 /* If disconneced, arbitrarily start with FIFO1. */ 7617 next_fifo = fifo = 0; 7618 do { 7619 next_fifo ^= CURRFIFO_1; 7620 ahd_set_modes(ahd, next_fifo, next_fifo); 7621 ahd_outb(ahd, DFCNTRL, 7622 ahd_inb(ahd, DFCNTRL) & ~(SCSIEN|HDMAEN)); 7623 while ((ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0) 7624 ahd_delay(10); 7625 /* 7626 * Set CURRFIFO to the now inactive channel. 7627 */ 7628 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7629 ahd_outb(ahd, DFFSTAT, next_fifo); 7630 } while (next_fifo != fifo); 7631 7632 /* 7633 * Reset the bus if we are initiating this reset 7634 */ 7635 ahd_clear_msg_state(ahd); 7636 ahd_outb(ahd, SIMODE1, 7637 ahd_inb(ahd, SIMODE1) & ~(ENBUSFREE|ENSCSIRST|ENBUSFREE)); 7638 7639 if (initiate_reset) 7640 ahd_reset_current_bus(ahd); 7641 7642 ahd_clear_intstat(ahd); 7643 7644 /* 7645 * Clean up all the state information for the 7646 * pending transactions on this bus. 7647 */ 7648 found = ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, channel, 7649 CAM_LUN_WILDCARD, SCB_LIST_NULL, 7650 ROLE_UNKNOWN, CAM_SCSI_BUS_RESET); 7651 7652 /* 7653 * Cleanup anything left in the FIFOs. 7654 */ 7655 ahd_clear_fifo(ahd, 0); 7656 ahd_clear_fifo(ahd, 1); 7657 7658 /* 7659 * Revert to async/narrow transfers until we renegotiate. 7660 */ 7661 max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7; 7662 for (target = 0; target <= max_scsiid; target++) { 7663 7664 if (ahd->enabled_targets[target] == NULL) 7665 continue; 7666 for (initiator = 0; initiator <= max_scsiid; initiator++) { 7667 struct ahd_devinfo devinfo; 7668 7669 ahd_compile_devinfo(&devinfo, target, initiator, 7670 CAM_LUN_WILDCARD, 7671 'A', ROLE_UNKNOWN); 7672 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 7673 AHD_TRANS_CUR, /*paused*/TRUE); 7674 ahd_set_syncrate(ahd, &devinfo, /*period*/0, 7675 /*offset*/0, /*ppr_options*/0, 7676 AHD_TRANS_CUR, /*paused*/TRUE); 7677 } 7678 } 7679 7680 #ifdef AHD_TARGET_MODE 7681 max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7; 7682 7683 /* 7684 * Send an immediate notify ccb to all target more peripheral 7685 * drivers affected by this action. 7686 */ 7687 for (target = 0; target <= max_scsiid; target++) { 7688 struct ahd_tmode_tstate* tstate; 7689 u_int lun; 7690 7691 tstate = ahd->enabled_targets[target]; 7692 if (tstate == NULL) 7693 continue; 7694 for (lun = 0; lun < AHD_NUM_LUNS; lun++) { 7695 struct ahd_tmode_lstate* lstate; 7696 7697 lstate = tstate->enabled_luns[lun]; 7698 if (lstate == NULL) 7699 continue; 7700 7701 ahd_queue_lstate_event(ahd, lstate, CAM_TARGET_WILDCARD, 7702 EVENT_TYPE_BUS_RESET, /*arg*/0); 7703 ahd_send_lstate_events(ahd, lstate); 7704 } 7705 } 7706 #endif 7707 7708 /* Notify the XPT that a bus reset occurred */ 7709 ahd_send_async(ahd, devinfo.channel, CAM_TARGET_WILDCARD, 7710 CAM_LUN_WILDCARD, AC_BUS_RESET, NULL); 7711 ahd_restart(ahd); 7712 7713 /* 7714 * Freeze the SIMQ until our poller can determine that 7715 * the bus reset has really gone away. We set the initial 7716 * timer to 0 to have the check performed as soon as possible 7717 * from the timer context. 7718 */ 7719 if ((ahd->flags & AHD_RESET_POLL_ACTIVE) == 0) { 7720 ahd->flags |= AHD_RESET_POLL_ACTIVE; 7721 ahd_freeze_simq(ahd); 7722 ahd_timer_reset(&ahd->reset_timer, 0, ahd_reset_poll, ahd); 7723 } 7724 return (found); 7725 } 7726 7727 7728 #define AHD_RESET_POLL_US 1000 7729 static void 7730 ahd_reset_poll(void *arg) 7731 { 7732 struct ahd_softc *ahd; 7733 u_int scsiseq1; 7734 u_long l; 7735 int s; 7736 7737 ahd_list_lock(&l); 7738 ahd = (void*)arg; 7739 if (ahd == NULL) { 7740 printf("ahd_reset_poll: Instance %p no longer exists\n", arg); 7741 ahd_list_unlock(&l); 7742 return; 7743 } 7744 ahd_lock(ahd, &s); 7745 ahd_pause(ahd); 7746 ahd_update_modes(ahd); 7747 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7748 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI); 7749 if ((ahd_inb(ahd, SSTAT1) & SCSIRSTI) != 0) { 7750 ahd_timer_reset(&ahd->reset_timer, AHD_RESET_POLL_US, 7751 ahd_reset_poll, ahd); 7752 ahd_unpause(ahd); 7753 ahd_unlock(ahd, &s); 7754 ahd_list_unlock(&l); 7755 return; 7756 } 7757 7758 /* Reset is now low. Complete chip reinitialization. */ 7759 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) | ENSCSIRST); 7760 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 7761 ahd_outb(ahd, SCSISEQ1, scsiseq1 & (ENSELI|ENRSELI|ENAUTOATNP)); 7762 ahd_unpause(ahd); 7763 ahd->flags &= ~AHD_RESET_POLL_ACTIVE; 7764 ahd_unlock(ahd, &s); 7765 ahd_release_simq(ahd); 7766 ahd_list_unlock(&l); 7767 } 7768 7769 /**************************** Statistics Processing ***************************/ 7770 static void 7771 ahd_stat_timer(void *arg) 7772 { 7773 struct ahd_softc *ahd; 7774 u_long l; 7775 int s; 7776 int enint_coal; 7777 7778 ahd_list_lock(&l); 7779 ahd = (void *)arg; 7780 if (ahd == NULL) { 7781 printf("ahd_stat_timer: Instance %p no longer exists\n", arg); 7782 ahd_list_unlock(&l); 7783 return; 7784 } 7785 ahd_lock(ahd, &s); 7786 7787 enint_coal = ahd->hs_mailbox & ENINT_COALESCE; 7788 if (ahd->cmdcmplt_total > ahd->int_coalescing_threshold) 7789 enint_coal |= ENINT_COALESCE; 7790 else if (ahd->cmdcmplt_total < ahd->int_coalescing_stop_threshold) 7791 enint_coal &= ~ENINT_COALESCE; 7792 7793 if (enint_coal != (ahd->hs_mailbox & ENINT_COALESCE)) { 7794 ahd_enable_coalescing(ahd, enint_coal); 7795 #ifdef AHD_DEBUG 7796 if ((ahd_debug & AHD_SHOW_INT_COALESCING) != 0) 7797 printf("%s: Interrupt coalescing " 7798 "now %sabled. Cmds %d\n", 7799 ahd_name(ahd), 7800 (enint_coal & ENINT_COALESCE) ? "en" : "dis", 7801 ahd->cmdcmplt_total); 7802 #endif 7803 } 7804 7805 ahd->cmdcmplt_bucket = (ahd->cmdcmplt_bucket+1) & (AHD_STAT_BUCKETS-1); 7806 ahd->cmdcmplt_total -= ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket]; 7807 ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket] = 0; 7808 ahd_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_US, 7809 ahd_stat_timer, ahd); 7810 ahd_unlock(ahd, &s); 7811 ahd_list_unlock(&l); 7812 } 7813 7814 /****************************** Status Processing *****************************/ 7815 void 7816 ahd_handle_scb_status(struct ahd_softc *ahd, struct scb *scb) 7817 { 7818 if (scb->hscb->shared_data.istatus.scsi_status != 0) { 7819 ahd_handle_scsi_status(ahd, scb); 7820 } else { 7821 ahd_calc_residual(ahd, scb); 7822 ahd_done(ahd, scb); 7823 } 7824 } 7825 7826 void 7827 ahd_handle_scsi_status(struct ahd_softc *ahd, struct scb *scb) 7828 { 7829 struct hardware_scb *hscb; 7830 u_int qfreeze_cnt; 7831 7832 /* 7833 * The sequencer freezes its select-out queue 7834 * anytime a SCSI status error occurs. We must 7835 * handle the error and decrement the QFREEZE count 7836 * to allow the sequencer to continue. 7837 */ 7838 hscb = scb->hscb; 7839 7840 /* Freeze the queue until the client sees the error. */ 7841 ahd_freeze_devq(ahd, scb); 7842 ahd_freeze_scb(scb); 7843 qfreeze_cnt = ahd_inw(ahd, QFREEZE_COUNT); 7844 if (qfreeze_cnt == 0) { 7845 printf("%s: Bad status with 0 qfreeze count!\n", ahd_name(ahd)); 7846 } else { 7847 qfreeze_cnt--; 7848 ahd_outw(ahd, QFREEZE_COUNT, qfreeze_cnt); 7849 } 7850 if (qfreeze_cnt == 0) 7851 ahd_outb(ahd, SEQ_FLAGS2, 7852 ahd_inb(ahd, SEQ_FLAGS2) & ~SELECTOUT_QFROZEN); 7853 7854 /* Don't want to clobber the original sense code */ 7855 if ((scb->flags & SCB_SENSE) != 0) { 7856 /* 7857 * Clear the SCB_SENSE Flag and perform 7858 * a normal command completion. 7859 */ 7860 scb->flags &= ~SCB_SENSE; 7861 ahd_set_transaction_status(scb, CAM_AUTOSENSE_FAIL); 7862 ahd_done(ahd, scb); 7863 return; 7864 } 7865 ahd_set_scsi_status(scb, hscb->shared_data.istatus.scsi_status); 7866 ahd_set_xfer_status(scb, hscb->shared_data.istatus.scsi_status); 7867 switch (hscb->shared_data.istatus.scsi_status) { 7868 case STATUS_PKT_SENSE: 7869 { 7870 struct scsi_status_iu_header *siu; 7871 7872 ahd_sync_sense(ahd, scb, BUS_DMASYNC_POSTREAD); 7873 siu = (struct scsi_status_iu_header *)scb->sense_data; 7874 ahd_set_scsi_status(scb, siu->status); 7875 #ifdef AHD_DEBUG 7876 if ((ahd_debug & AHD_SHOW_SENSE) != 0) { 7877 ahd_print_path(ahd, scb); 7878 printf("SCB 0x%x Received PKT Status of 0x%x\n", 7879 SCB_GET_TAG(scb), siu->status); 7880 } 7881 #endif 7882 if ((siu->flags & SIU_RSPVALID) != 0) { 7883 scsipi_printaddr(scb->xs->xs_periph); 7884 if (scsi_4btoul(siu->pkt_failures_length) < 4) { 7885 printf("Unable to parse pkt_failures\n"); 7886 } else { 7887 7888 switch (SIU_PKTFAIL_CODE(siu)) { 7889 case SIU_PFC_NONE: 7890 printf("No packet failure found\n"); 7891 break; 7892 case SIU_PFC_CIU_FIELDS_INVALID: 7893 printf("Invalid Command IU Field\n"); 7894 break; 7895 case SIU_PFC_TMF_NOT_SUPPORTED: 7896 printf("TMF not supportd\n"); 7897 break; 7898 case SIU_PFC_TMF_FAILED: 7899 printf("TMF failed\n"); 7900 break; 7901 case SIU_PFC_INVALID_TYPE_CODE: 7902 printf("Invalid L_Q Type code\n"); 7903 break; 7904 case SIU_PFC_ILLEGAL_REQUEST: 7905 printf("Illegal request\n"); 7906 default: 7907 break; 7908 } 7909 } 7910 if (siu->status == SCSI_STATUS_OK) 7911 ahd_set_transaction_status(scb, CAM_REQ_CMP_ERR); 7912 } 7913 if ((siu->flags & SIU_SNSVALID) != 0) { 7914 scb->flags |= SCB_PKT_SENSE; 7915 #ifdef AHD_DEBUG 7916 if ((ahd_debug & AHD_SHOW_SENSE) != 0) { 7917 printf("Sense data available (%d)\n", siu->sense_length[0]); 7918 printf("SK 0x%x ASC 0x%x ASCQ 0x%x\n", 7919 ((uint8_t)scb->sense_data[SIU_SENSE_OFFSET(siu)+2]) & 0x0F, 7920 ((uint8_t)scb->sense_data[SIU_SENSE_OFFSET(siu)+12]), 7921 ((uint8_t)scb->sense_data[SIU_SENSE_OFFSET(siu)+13])); 7922 } 7923 #endif 7924 } 7925 ahd_done(ahd, scb); 7926 break; 7927 } 7928 case SCSI_STATUS_CMD_TERMINATED: 7929 case SCSI_STATUS_CHECK_COND: 7930 { 7931 struct ahd_devinfo devinfo; 7932 struct ahd_dma_seg *sg; 7933 struct scsi_request_sense *sc; 7934 struct ahd_initiator_tinfo *targ_info; 7935 struct ahd_tmode_tstate *tstate; 7936 struct ahd_transinfo *tinfo; 7937 #ifdef AHD_DEBUG 7938 if (ahd_debug & AHD_SHOW_SENSE) { 7939 ahd_print_path(ahd, scb); 7940 printf("SCB %d: requests Check Status\n", 7941 SCB_GET_TAG(scb)); 7942 } 7943 #endif 7944 7945 if (ahd_perform_autosense(scb) == 0) 7946 break; 7947 7948 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb), 7949 SCB_GET_TARGET(ahd, scb), 7950 SCB_GET_LUN(scb), 7951 SCB_GET_CHANNEL(ahd, scb), 7952 ROLE_INITIATOR); 7953 targ_info = ahd_fetch_transinfo(ahd, 7954 devinfo.channel, 7955 devinfo.our_scsiid, 7956 devinfo.target, 7957 &tstate); 7958 tinfo = &targ_info->curr; 7959 sg = scb->sg_list; 7960 sc = (struct scsi_request_sense *)hscb->shared_data.idata.cdb; 7961 /* 7962 * Save off the residual if there is one. 7963 */ 7964 ahd_update_residual(ahd, scb); 7965 #ifdef AHD_DEBUG 7966 if (ahd_debug & AHD_SHOW_SENSE) { 7967 ahd_print_path(ahd, scb); 7968 printf("Sending Sense\n"); 7969 } 7970 #endif 7971 scb->sg_count = 0; 7972 sg = ahd_sg_setup(ahd, scb, sg, ahd_get_sense_bufaddr(ahd, scb), 7973 ahd_get_sense_bufsize(ahd, scb), 7974 /*last*/TRUE); 7975 memset(sc, 0, sizeof(*sc)); 7976 sc->opcode = SCSI_REQUEST_SENSE; 7977 sc->length = ahd_get_sense_bufsize(ahd, scb); 7978 7979 /* 7980 * We can't allow the target to disconnect. 7981 * This will be an untagged transaction and 7982 * having the target disconnect will make this 7983 * transaction indistinguishable from outstanding 7984 * tagged transactions. 7985 */ 7986 hscb->control = 0; 7987 7988 /* 7989 * This request sense could be because the 7990 * the device lost power or in some other 7991 * way has lost our transfer negotiations. 7992 * Renegotiate if appropriate. Unit attention 7993 * errors will be reported before any data 7994 * phases occur. 7995 */ 7996 if (ahd_get_residual(scb) == ahd_get_transfer_length(scb)) { 7997 ahd_update_neg_request(ahd, &devinfo, 7998 tstate, targ_info, 7999 AHD_NEG_IF_NON_ASYNC); 8000 } 8001 if (tstate->auto_negotiate & devinfo.target_mask) { 8002 hscb->control |= MK_MESSAGE; 8003 scb->flags &= 8004 ~(SCB_NEGOTIATE|SCB_ABORT|SCB_DEVICE_RESET); 8005 scb->flags |= SCB_AUTO_NEGOTIATE; 8006 } 8007 hscb->cdb_len = sizeof(*sc); 8008 ahd_setup_data_scb(ahd, scb); 8009 scb->flags |= SCB_SENSE; 8010 ahd_queue_scb(ahd, scb); 8011 /* 8012 * Ensure we have enough time to actually 8013 * retrieve the sense. 8014 */ 8015 ahd_scb_timer_reset(scb, 5 * 1000000); 8016 break; 8017 } 8018 case SCSI_STATUS_OK: 8019 printf("%s: Interrupted for status of 0? (SCB 0x%x)\n", 8020 ahd_name(ahd), SCB_GET_TAG(scb)); 8021 /* FALLTHROUGH */ 8022 default: 8023 ahd_done(ahd, scb); 8024 break; 8025 } 8026 } 8027 8028 /* 8029 * Calculate the residual for a just completed SCB. 8030 */ 8031 void 8032 ahd_calc_residual(struct ahd_softc *ahd, struct scb *scb) 8033 { 8034 struct hardware_scb *hscb; 8035 struct initiator_status *spkt; 8036 uint32_t sgptr; 8037 uint32_t resid_sgptr; 8038 uint32_t resid; 8039 8040 /* 8041 * 5 cases. 8042 * 1) No residual. 8043 * SG_STATUS_VALID clear in sgptr. 8044 * 2) Transferless command 8045 * 3) Never performed any transfers. 8046 * sgptr has SG_FULL_RESID set. 8047 * 4) No residual but target did not 8048 * save data pointers after the 8049 * last transfer, so sgptr was 8050 * never updated. 8051 * 5) We have a partial residual. 8052 * Use residual_sgptr to determine 8053 * where we are. 8054 */ 8055 8056 hscb = scb->hscb; 8057 sgptr = ahd_le32toh(hscb->sgptr); 8058 if ((sgptr & SG_STATUS_VALID) == 0) 8059 /* Case 1 */ 8060 return; 8061 sgptr &= ~SG_STATUS_VALID; 8062 8063 if ((sgptr & SG_LIST_NULL) != 0) 8064 /* Case 2 */ 8065 return; 8066 8067 /* 8068 * Residual fields are the same in both 8069 * target and initiator status packets, 8070 * so we can always use the initiator fields 8071 * regardless of the role for this SCB. 8072 */ 8073 spkt = &hscb->shared_data.istatus; 8074 resid_sgptr = ahd_le32toh(spkt->residual_sgptr); 8075 if ((sgptr & SG_FULL_RESID) != 0) { 8076 /* Case 3 */ 8077 resid = ahd_get_transfer_length(scb); 8078 } else if ((resid_sgptr & SG_LIST_NULL) != 0) { 8079 /* Case 4 */ 8080 return; 8081 } else if ((resid_sgptr & SG_OVERRUN_RESID) != 0) { 8082 ahd_print_path(ahd, scb); 8083 printf("data overrun detected Tag == 0x%x.\n", 8084 SCB_GET_TAG(scb)); 8085 ahd_freeze_devq(ahd, scb); 8086 ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR); 8087 ahd_freeze_scb(scb); 8088 return; 8089 } else if ((resid_sgptr & ~SG_PTR_MASK) != 0) { 8090 panic("Bogus resid sgptr value 0x%x\n", resid_sgptr); 8091 /* NOTREACHED */ 8092 } else { 8093 struct ahd_dma_seg *sg; 8094 8095 /* 8096 * Remainder of the SG where the transfer 8097 * stopped. 8098 */ 8099 resid = ahd_le32toh(spkt->residual_datacnt) & AHD_SG_LEN_MASK; 8100 sg = ahd_sg_bus_to_virt(ahd, scb, resid_sgptr & SG_PTR_MASK); 8101 8102 /* The residual sg_ptr always points to the next sg */ 8103 sg--; 8104 8105 /* 8106 * Add up the contents of all residual 8107 * SG segments that are after the SG where 8108 * the transfer stopped. 8109 */ 8110 while ((ahd_le32toh(sg->len) & AHD_DMA_LAST_SEG) == 0) { 8111 sg++; 8112 resid += ahd_le32toh(sg->len) & AHD_SG_LEN_MASK; 8113 } 8114 } 8115 8116 if ((scb->flags & SCB_SENSE) == 0) 8117 ahd_set_residual(scb, resid); 8118 /*else 8119 ahd_set_sense_residual(scb, resid);*/ 8120 8121 #ifdef AHD_DEBUG 8122 if ((ahd_debug & AHD_SHOW_MISC) != 0) { 8123 ahd_print_path(ahd, scb); 8124 printf("Handled %sResidual of %d bytes\n", 8125 (scb->flags & SCB_SENSE) ? "Sense " : "", resid); 8126 } 8127 #endif 8128 } 8129 8130 /******************************* Target Mode **********************************/ 8131 #ifdef AHD_TARGET_MODE 8132 /* 8133 * Add a target mode event to this lun's queue 8134 */ 8135 static void 8136 ahd_queue_lstate_event(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate, 8137 u_int initiator_id, u_int event_type, u_int event_arg) 8138 { 8139 struct ahd_tmode_event *event; 8140 int pending; 8141 8142 xpt_freeze_devq(lstate->path, /*count*/1); 8143 if (lstate->event_w_idx >= lstate->event_r_idx) 8144 pending = lstate->event_w_idx - lstate->event_r_idx; 8145 else 8146 pending = AHD_TMODE_EVENT_BUFFER_SIZE + 1 8147 - (lstate->event_r_idx - lstate->event_w_idx); 8148 8149 if (event_type == EVENT_TYPE_BUS_RESET 8150 || event_type == MSG_BUS_DEV_RESET) { 8151 /* 8152 * Any earlier events are irrelevant, so reset our buffer. 8153 * This has the effect of allowing us to deal with reset 8154 * floods (an external device holding down the reset line) 8155 * without losing the event that is really interesting. 8156 */ 8157 lstate->event_r_idx = 0; 8158 lstate->event_w_idx = 0; 8159 xpt_release_devq(lstate->path, pending, /*runqueue*/FALSE); 8160 } 8161 8162 if (pending == AHD_TMODE_EVENT_BUFFER_SIZE) { 8163 xpt_print_path(lstate->path); 8164 printf("immediate event %x:%x lost\n", 8165 lstate->event_buffer[lstate->event_r_idx].event_type, 8166 lstate->event_buffer[lstate->event_r_idx].event_arg); 8167 lstate->event_r_idx++; 8168 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8169 lstate->event_r_idx = 0; 8170 xpt_release_devq(lstate->path, /*count*/1, /*runqueue*/FALSE); 8171 } 8172 8173 event = &lstate->event_buffer[lstate->event_w_idx]; 8174 event->initiator_id = initiator_id; 8175 event->event_type = event_type; 8176 event->event_arg = event_arg; 8177 lstate->event_w_idx++; 8178 if (lstate->event_w_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8179 lstate->event_w_idx = 0; 8180 } 8181 8182 /* 8183 * Send any target mode events queued up waiting 8184 * for immediate notify resources. 8185 */ 8186 void 8187 ahd_send_lstate_events(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate) 8188 { 8189 struct ccb_hdr *ccbh; 8190 struct ccb_immed_notify *inot; 8191 8192 while (lstate->event_r_idx != lstate->event_w_idx 8193 && (ccbh = SLIST_FIRST(&lstate->immed_notifies)) != NULL) { 8194 struct ahd_tmode_event *event; 8195 8196 event = &lstate->event_buffer[lstate->event_r_idx]; 8197 SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle); 8198 inot = (struct ccb_immed_notify *)ccbh; 8199 switch (event->event_type) { 8200 case EVENT_TYPE_BUS_RESET: 8201 ccbh->status = CAM_SCSI_BUS_RESET|CAM_DEV_QFRZN; 8202 break; 8203 default: 8204 ccbh->status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN; 8205 inot->message_args[0] = event->event_type; 8206 inot->message_args[1] = event->event_arg; 8207 break; 8208 } 8209 inot->initiator_id = event->initiator_id; 8210 inot->sense_len = 0; 8211 xpt_done((union ccb *)inot); 8212 lstate->event_r_idx++; 8213 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8214 lstate->event_r_idx = 0; 8215 } 8216 } 8217 #endif 8218 8219 /******************** Sequencer Program Patching/Download *********************/ 8220 8221 #ifdef AHD_DUMP_SEQ 8222 void 8223 ahd_dumpseq(struct ahd_softc* ahd) 8224 { 8225 int i; 8226 int max_prog; 8227 8228 max_prog = 2048; 8229 8230 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 8231 ahd_outb(ahd, PRGMCNT, 0); 8232 ahd_outb(ahd, PRGMCNT+1, 0); 8233 for (i = 0; i < max_prog; i++) { 8234 uint8_t ins_bytes[4]; 8235 8236 ahd_insb(ahd, SEQRAM, ins_bytes, 4); 8237 printf("0x%08x\n", ins_bytes[0] << 24 8238 | ins_bytes[1] << 16 8239 | ins_bytes[2] << 8 8240 | ins_bytes[3]); 8241 } 8242 } 8243 #endif 8244 8245 static void 8246 ahd_loadseq(struct ahd_softc *ahd) 8247 { 8248 struct cs cs_table[num_critical_sections]; 8249 u_int begin_set[num_critical_sections]; 8250 u_int end_set[num_critical_sections]; 8251 struct patch *cur_patch; 8252 u_int cs_count; 8253 u_int cur_cs; 8254 u_int i; 8255 int downloaded; 8256 u_int skip_addr; 8257 u_int sg_prefetch_cnt; 8258 u_int sg_prefetch_cnt_limit; 8259 u_int sg_prefetch_align; 8260 u_int sg_size; 8261 uint8_t download_consts[DOWNLOAD_CONST_COUNT]; 8262 8263 if (bootverbose) 8264 printf("%s: Downloading Sequencer Program...", 8265 ahd_name(ahd)); 8266 8267 #if DOWNLOAD_CONST_COUNT != 7 8268 #error "Download Const Mismatch" 8269 #endif 8270 /* 8271 * Start out with 0 critical sections 8272 * that apply to this firmware load. 8273 */ 8274 cs_count = 0; 8275 cur_cs = 0; 8276 memset(begin_set, 0, sizeof(begin_set)); 8277 memset(end_set, 0, sizeof(end_set)); 8278 8279 /* 8280 * Setup downloadable constant table. 8281 * 8282 * The computation for the S/G prefetch variables is 8283 * a bit complicated. We would like to always fetch 8284 * in terms of cachelined sized increments. However, 8285 * if the cacheline is not an even multiple of the 8286 * SG element size or is larger than our SG RAM, using 8287 * just the cache size might leave us with only a portion 8288 * of an SG element at the tail of a prefetch. If the 8289 * cacheline is larger than our S/G prefetch buffer less 8290 * the size of an SG element, we may round down to a cacheline 8291 * that doesn't contain any or all of the S/G of interest 8292 * within the bounds of our S/G ram. Provide variables to 8293 * the sequencer that will allow it to handle these edge 8294 * cases. 8295 */ 8296 /* Start by aligning to the nearest cacheline. */ 8297 sg_prefetch_align = ahd->pci_cachesize; 8298 if (sg_prefetch_align == 0) 8299 sg_prefetch_align = 8; 8300 /* Round down to the nearest power of 2. */ 8301 while (powerof2(sg_prefetch_align) == 0) 8302 sg_prefetch_align--; 8303 /* 8304 * If the cacheline boundary is greater than half our prefetch RAM 8305 * we risk not being able to fetch even a single complete S/G 8306 * segment if we align to that boundary. 8307 */ 8308 if (sg_prefetch_align > CCSGADDR_MAX/2) 8309 sg_prefetch_align = CCSGADDR_MAX/2; 8310 /* Start by fetching a single cacheline. */ 8311 sg_prefetch_cnt = sg_prefetch_align; 8312 /* 8313 * Increment the prefetch count by cachelines until 8314 * at least one S/G element will fit. 8315 */ 8316 sg_size = sizeof(struct ahd_dma_seg); 8317 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 8318 sg_size = sizeof(struct ahd_dma64_seg); 8319 while (sg_prefetch_cnt < sg_size) 8320 sg_prefetch_cnt += sg_prefetch_align; 8321 /* 8322 * If the cacheline is not an even multiple of 8323 * the S/G size, we may only get a partial S/G when 8324 * we align. Add a cacheline if this is the case. 8325 */ 8326 if ((sg_prefetch_align % sg_size) != 0 8327 && (sg_prefetch_cnt < CCSGADDR_MAX)) 8328 sg_prefetch_cnt += sg_prefetch_align; 8329 /* 8330 * Lastly, compute a value that the sequencer can use 8331 * to determine if the remainder of the CCSGRAM buffer 8332 * has a full S/G element in it. 8333 */ 8334 sg_prefetch_cnt_limit = -(sg_prefetch_cnt - sg_size + 1); 8335 download_consts[SG_PREFETCH_CNT] = sg_prefetch_cnt; 8336 download_consts[SG_PREFETCH_CNT_LIMIT] = sg_prefetch_cnt_limit; 8337 download_consts[SG_PREFETCH_ALIGN_MASK] = ~(sg_prefetch_align - 1); 8338 download_consts[SG_PREFETCH_ADDR_MASK] = (sg_prefetch_align - 1); 8339 download_consts[SG_SIZEOF] = sg_size; 8340 download_consts[PKT_OVERRUN_BUFOFFSET] = 8341 (ahd->overrun_buf - (uint8_t *)ahd->qoutfifo) / 256; 8342 download_consts[SCB_TRANSFER_SIZE] = SCB_TRANSFER_SIZE_1BYTE_LUN; 8343 cur_patch = patches; 8344 downloaded = 0; 8345 skip_addr = 0; 8346 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 8347 ahd_outb(ahd, PRGMCNT, 0); 8348 ahd_outb(ahd, PRGMCNT+1, 0); 8349 8350 for (i = 0; i < sizeof(seqprog)/4; i++) { 8351 if (ahd_check_patch(ahd, &cur_patch, i, &skip_addr) == 0) { 8352 /* 8353 * Don't download this instruction as it 8354 * is in a patch that was removed. 8355 */ 8356 continue; 8357 } 8358 /* 8359 * Move through the CS table until we find a CS 8360 * that might apply to this instruction. 8361 */ 8362 for (; cur_cs < num_critical_sections; cur_cs++) { 8363 if (critical_sections[cur_cs].end <= i) { 8364 if (begin_set[cs_count] == TRUE 8365 && end_set[cs_count] == FALSE) { 8366 cs_table[cs_count].end = downloaded; 8367 end_set[cs_count] = TRUE; 8368 cs_count++; 8369 } 8370 continue; 8371 } 8372 if (critical_sections[cur_cs].begin <= i 8373 && begin_set[cs_count] == FALSE) { 8374 cs_table[cs_count].begin = downloaded; 8375 begin_set[cs_count] = TRUE; 8376 } 8377 break; 8378 } 8379 ahd_download_instr(ahd, i, download_consts); 8380 downloaded++; 8381 } 8382 8383 ahd->num_critical_sections = cs_count; 8384 if (cs_count != 0) { 8385 8386 cs_count *= sizeof(struct cs); 8387 ahd->critical_sections = malloc(cs_count, M_DEVBUF, M_NOWAIT); 8388 if (ahd->critical_sections == NULL) 8389 panic("ahd_loadseq: Could not malloc"); 8390 memcpy(ahd->critical_sections, cs_table, cs_count); 8391 } 8392 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE); 8393 8394 if (bootverbose) { 8395 printf(" %d instructions downloaded\n", downloaded); 8396 printf("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n", 8397 ahd_name(ahd), ahd->features, ahd->bugs, ahd->flags); 8398 } 8399 } 8400 8401 static int 8402 ahd_check_patch(struct ahd_softc *ahd, struct patch **start_patch, 8403 u_int start_instr, u_int *skip_addr) 8404 { 8405 struct patch *cur_patch; 8406 struct patch *last_patch; 8407 u_int num_patches; 8408 8409 num_patches = sizeof(patches)/sizeof(struct patch); 8410 last_patch = &patches[num_patches]; 8411 cur_patch = *start_patch; 8412 8413 while (cur_patch < last_patch && start_instr == cur_patch->begin) { 8414 8415 if (cur_patch->patch_func(ahd) == 0) { 8416 8417 /* Start rejecting code */ 8418 *skip_addr = start_instr + cur_patch->skip_instr; 8419 cur_patch += cur_patch->skip_patch; 8420 } else { 8421 /* Accepted this patch. Advance to the next 8422 * one and wait for our intruction pointer to 8423 * hit this point. 8424 */ 8425 cur_patch++; 8426 } 8427 } 8428 8429 *start_patch = cur_patch; 8430 if (start_instr < *skip_addr) 8431 /* Still skipping */ 8432 return (0); 8433 8434 return (1); 8435 } 8436 8437 static u_int 8438 ahd_resolve_seqaddr(struct ahd_softc *ahd, u_int address) 8439 { 8440 struct patch *cur_patch; 8441 int address_offset; 8442 u_int skip_addr; 8443 u_int i; 8444 8445 address_offset = 0; 8446 cur_patch = patches; 8447 skip_addr = 0; 8448 8449 for (i = 0; i < address;) { 8450 8451 ahd_check_patch(ahd, &cur_patch, i, &skip_addr); 8452 8453 if (skip_addr > i) { 8454 int end_addr; 8455 8456 end_addr = MIN(address, skip_addr); 8457 address_offset += end_addr - i; 8458 i = skip_addr; 8459 } else { 8460 i++; 8461 } 8462 } 8463 return (address - address_offset); 8464 } 8465 8466 static void 8467 ahd_download_instr(struct ahd_softc *ahd, u_int instrptr, uint8_t *dconsts) 8468 { 8469 union ins_formats instr; 8470 struct ins_format1 *fmt1_ins; 8471 struct ins_format3 *fmt3_ins; 8472 u_int opcode; 8473 8474 /* 8475 * The firmware is always compiled into a little endian format. 8476 */ 8477 instr.integer = ahd_le32toh(*(uint32_t*)&seqprog[instrptr * 4]); 8478 8479 fmt1_ins = &instr.format1; 8480 fmt3_ins = NULL; 8481 8482 /* Pull the opcode */ 8483 opcode = instr.format1.opcode; 8484 switch (opcode) { 8485 case AIC_OP_JMP: 8486 case AIC_OP_JC: 8487 case AIC_OP_JNC: 8488 case AIC_OP_CALL: 8489 case AIC_OP_JNE: 8490 case AIC_OP_JNZ: 8491 case AIC_OP_JE: 8492 case AIC_OP_JZ: 8493 { 8494 fmt3_ins = &instr.format3; 8495 fmt3_ins->address = ahd_resolve_seqaddr(ahd, fmt3_ins->address); 8496 /* FALLTHROUGH */ 8497 } 8498 case AIC_OP_OR: 8499 case AIC_OP_AND: 8500 case AIC_OP_XOR: 8501 case AIC_OP_ADD: 8502 case AIC_OP_ADC: 8503 case AIC_OP_BMOV: 8504 if (fmt1_ins->parity != 0) { 8505 fmt1_ins->immediate = dconsts[fmt1_ins->immediate]; 8506 } 8507 fmt1_ins->parity = 0; 8508 /* FALLTHROUGH */ 8509 case AIC_OP_ROL: 8510 { 8511 int i, count; 8512 8513 /* Calculate odd parity for the instruction */ 8514 for (i = 0, count = 0; i < 31; i++) { 8515 uint32_t mask; 8516 8517 mask = 0x01 << i; 8518 if ((instr.integer & mask) != 0) 8519 count++; 8520 } 8521 if ((count & 0x01) == 0) 8522 instr.format1.parity = 1; 8523 8524 /* The sequencer is a little endian CPU */ 8525 instr.integer = ahd_htole32(instr.integer); 8526 ahd_outsb(ahd, SEQRAM, instr.bytes, 4); 8527 break; 8528 } 8529 default: 8530 panic("Unknown opcode encountered in seq program"); 8531 break; 8532 } 8533 } 8534 8535 static int 8536 ahd_probe_stack_size(struct ahd_softc *ahd) 8537 { 8538 int last_probe; 8539 8540 last_probe = 0; 8541 while (1) { 8542 int i; 8543 8544 /* 8545 * We avoid using 0 as a pattern to avoid 8546 * confusion if the stack implementation 8547 * "back-fills" with zeros when "poping' 8548 * entries. 8549 */ 8550 for (i = 1; i <= last_probe+1; i++) { 8551 ahd_outb(ahd, STACK, i & 0xFF); 8552 ahd_outb(ahd, STACK, (i >> 8) & 0xFF); 8553 } 8554 8555 /* Verify */ 8556 for (i = last_probe+1; i > 0; i--) { 8557 u_int stack_entry; 8558 8559 stack_entry = ahd_inb(ahd, STACK) 8560 |(ahd_inb(ahd, STACK) << 8); 8561 if (stack_entry != i) 8562 goto sized; 8563 } 8564 last_probe++; 8565 } 8566 sized: 8567 return (last_probe); 8568 } 8569 8570 void 8571 ahd_dump_all_cards_state(void) 8572 { 8573 struct ahd_softc *list_ahd; 8574 8575 TAILQ_FOREACH(list_ahd, &ahd_tailq, links) { 8576 ahd_dump_card_state(list_ahd); 8577 } 8578 } 8579 8580 int 8581 ahd_print_register(ahd_reg_parse_entry_t *table, u_int num_entries, 8582 const char *name, u_int address, u_int value, 8583 u_int *cur_column, u_int wrap_point) 8584 { 8585 int printed; 8586 u_int printed_mask; 8587 char line[1024]; 8588 8589 line[0] = 0; 8590 8591 if (cur_column != NULL && *cur_column >= wrap_point) { 8592 printf("\n"); 8593 *cur_column = 0; 8594 } 8595 printed = snprintf(line, sizeof(line), "%s[0x%x]", name, value); 8596 if (table == NULL) { 8597 printed += snprintf(&line[printed], (sizeof line) - printed, 8598 " "); 8599 printf("%s", line); 8600 if (cur_column != NULL) 8601 *cur_column += printed; 8602 return (printed); 8603 } 8604 printed_mask = 0; 8605 while (printed_mask != 0xFF) { 8606 int entry; 8607 8608 for (entry = 0; entry < num_entries; entry++) { 8609 if (((value & table[entry].mask) 8610 != table[entry].value) 8611 || ((printed_mask & table[entry].mask) 8612 == table[entry].mask)) 8613 continue; 8614 printed += snprintf(&line[printed], 8615 (sizeof line) - printed, "%s%s", 8616 printed_mask == 0 ? ":(" : "|", 8617 table[entry].name); 8618 printed_mask |= table[entry].mask; 8619 8620 break; 8621 } 8622 if (entry >= num_entries) 8623 break; 8624 } 8625 if (printed_mask != 0) 8626 printed += snprintf(&line[printed], 8627 (sizeof line) - printed, ") "); 8628 else 8629 printed += snprintf(&line[printed], 8630 (sizeof line) - printed, " "); 8631 if (cur_column != NULL) 8632 *cur_column += printed; 8633 printf("%s", line); 8634 8635 return (printed); 8636 } 8637 8638 void 8639 ahd_dump_card_state(struct ahd_softc *ahd) 8640 { 8641 struct scb *scb; 8642 ahd_mode_state saved_modes; 8643 u_int dffstat; 8644 int paused; 8645 u_int scb_index; 8646 u_int saved_scb_index; 8647 u_int cur_col; 8648 int i; 8649 8650 if (ahd_is_paused(ahd)) { 8651 paused = 1; 8652 } else { 8653 paused = 0; 8654 ahd_pause(ahd); 8655 } 8656 saved_modes = ahd_save_modes(ahd); 8657 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 8658 printf(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n" 8659 "%s: Dumping Card State at program address 0x%x Mode 0x%x\n", 8660 ahd_name(ahd), 8661 ahd_inb(ahd, CURADDR) | (ahd_inb(ahd, CURADDR+1) << 8), 8662 ahd_build_mode_state(ahd, ahd->saved_src_mode, 8663 ahd->saved_dst_mode)); 8664 if (paused) 8665 printf("Card was paused\n"); 8666 8667 if (ahd_check_cmdcmpltqueues(ahd)) 8668 printf("Completions are pending\n"); 8669 /* 8670 * Mode independent registers. 8671 */ 8672 cur_col = 0; 8673 ahd_hs_mailbox_print(ahd_inb(ahd, LOCAL_HS_MAILBOX), &cur_col, 50); 8674 ahd_intctl_print(ahd_inb(ahd, INTCTL), &cur_col, 50); 8675 ahd_seqintstat_print(ahd_inb(ahd, SEQINTSTAT), &cur_col, 50); 8676 ahd_saved_mode_print(ahd_inb(ahd, SAVED_MODE), &cur_col, 50); 8677 ahd_dffstat_print(ahd_inb(ahd, DFFSTAT), &cur_col, 50); 8678 ahd_scsisigi_print(ahd_inb(ahd, SCSISIGI), &cur_col, 50); 8679 ahd_scsiphase_print(ahd_inb(ahd, SCSIPHASE), &cur_col, 50); 8680 ahd_scsibus_print(ahd_inb(ahd, SCSIBUS), &cur_col, 50); 8681 ahd_lastphase_print(ahd_inb(ahd, LASTPHASE), &cur_col, 50); 8682 ahd_scsiseq0_print(ahd_inb(ahd, SCSISEQ0), &cur_col, 50); 8683 ahd_scsiseq1_print(ahd_inb(ahd, SCSISEQ1), &cur_col, 50); 8684 ahd_seqctl0_print(ahd_inb(ahd, SEQCTL0), &cur_col, 50); 8685 ahd_seqintctl_print(ahd_inb(ahd, SEQINTCTL), &cur_col, 50); 8686 ahd_seq_flags_print(ahd_inb(ahd, SEQ_FLAGS), &cur_col, 50); 8687 ahd_seq_flags2_print(ahd_inb(ahd, SEQ_FLAGS2), &cur_col, 50); 8688 ahd_sstat0_print(ahd_inb(ahd, SSTAT0), &cur_col, 50); 8689 ahd_sstat1_print(ahd_inb(ahd, SSTAT1), &cur_col, 50); 8690 ahd_sstat2_print(ahd_inb(ahd, SSTAT2), &cur_col, 50); 8691 ahd_sstat3_print(ahd_inb(ahd, SSTAT3), &cur_col, 50); 8692 ahd_perrdiag_print(ahd_inb(ahd, PERRDIAG), &cur_col, 50); 8693 ahd_simode1_print(ahd_inb(ahd, SIMODE1), &cur_col, 50); 8694 ahd_lqistat0_print(ahd_inb(ahd, LQISTAT0), &cur_col, 50); 8695 ahd_lqistat1_print(ahd_inb(ahd, LQISTAT1), &cur_col, 50); 8696 ahd_lqistat2_print(ahd_inb(ahd, LQISTAT2), &cur_col, 50); 8697 ahd_lqostat0_print(ahd_inb(ahd, LQOSTAT0), &cur_col, 50); 8698 ahd_lqostat1_print(ahd_inb(ahd, LQOSTAT1), &cur_col, 50); 8699 ahd_lqostat2_print(ahd_inb(ahd, LQOSTAT2), &cur_col, 50); 8700 printf("\n"); 8701 printf("\nSCB Count = %d CMDS_PENDING = %d LASTSCB 0x%x " 8702 "CURRSCB 0x%x NEXTSCB 0x%x\n", 8703 ahd->scb_data.numscbs, ahd_inw(ahd, CMDS_PENDING), 8704 ahd_inw(ahd, LASTSCB), ahd_inw(ahd, CURRSCB), 8705 ahd_inw(ahd, NEXTSCB)); 8706 cur_col = 0; 8707 /* QINFIFO */ 8708 ahd_search_qinfifo(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS, 8709 CAM_LUN_WILDCARD, SCB_LIST_NULL, 8710 ROLE_UNKNOWN, /*status*/0, SEARCH_PRINT); 8711 saved_scb_index = ahd_get_scbptr(ahd); 8712 printf("Pending list:"); 8713 i = 0; 8714 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 8715 if (i++ > AHD_SCB_MAX) 8716 break; 8717 /*cur_col =*/ printf("\n%3d FIFO_USE[0x%x] ", SCB_GET_TAG(scb), 8718 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT)); 8719 ahd_set_scbptr(ahd, SCB_GET_TAG(scb)); 8720 ahd_scb_control_print(ahd_inb_scbram(ahd, SCB_CONTROL), 8721 &cur_col, 60); 8722 ahd_scb_scsiid_print(ahd_inb_scbram(ahd, SCB_SCSIID), 8723 &cur_col, 60); 8724 } 8725 printf("\nTotal %d\n", i); 8726 8727 printf("Kernel Free SCB list: "); 8728 i = 0; 8729 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 8730 struct scb *list_scb; 8731 8732 list_scb = scb; 8733 do { 8734 printf("%d ", SCB_GET_TAG(list_scb)); 8735 list_scb = LIST_NEXT(list_scb, collision_links); 8736 } while (list_scb && i++ < AHD_SCB_MAX); 8737 } 8738 8739 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) { 8740 if (i++ > AHD_SCB_MAX) 8741 break; 8742 printf("%d ", SCB_GET_TAG(scb)); 8743 } 8744 printf("\n"); 8745 8746 printf("Sequencer Complete DMA-inprog list: "); 8747 scb_index = ahd_inw(ahd, COMPLETE_SCB_DMAINPROG_HEAD); 8748 i = 0; 8749 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 8750 ahd_set_scbptr(ahd, scb_index); 8751 printf("%d ", scb_index); 8752 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 8753 } 8754 printf("\n"); 8755 8756 printf("Sequencer Complete list: "); 8757 scb_index = ahd_inw(ahd, COMPLETE_SCB_HEAD); 8758 i = 0; 8759 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 8760 ahd_set_scbptr(ahd, scb_index); 8761 printf("%d ", scb_index); 8762 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 8763 } 8764 printf("\n"); 8765 8766 8767 printf("Sequencer DMA-Up and Complete list: "); 8768 scb_index = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 8769 i = 0; 8770 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 8771 ahd_set_scbptr(ahd, scb_index); 8772 printf("%d ", scb_index); 8773 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 8774 } 8775 printf("\n"); 8776 ahd_set_scbptr(ahd, saved_scb_index); 8777 dffstat = ahd_inb(ahd, DFFSTAT); 8778 for (i = 0; i < 2; i++) { 8779 #ifdef AHD_DEBUG 8780 struct scb *fifo_scb; 8781 #endif 8782 u_int fifo_scbptr; 8783 8784 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i); 8785 fifo_scbptr = ahd_get_scbptr(ahd); 8786 printf("\n%s: FIFO%d %s, LONGJMP == 0x%x, SCB 0x%x\n", 8787 ahd_name(ahd), i, 8788 (dffstat & (FIFO0FREE << i)) ? "Free" : "Active", 8789 ahd_inw(ahd, LONGJMP_ADDR), fifo_scbptr); 8790 cur_col = 0; 8791 ahd_seqimode_print(ahd_inb(ahd, SEQIMODE), &cur_col, 50); 8792 ahd_seqintsrc_print(ahd_inb(ahd, SEQINTSRC), &cur_col, 50); 8793 ahd_dfcntrl_print(ahd_inb(ahd, DFCNTRL), &cur_col, 50); 8794 ahd_dfstatus_print(ahd_inb(ahd, DFSTATUS), &cur_col, 50); 8795 ahd_sg_cache_shadow_print(ahd_inb(ahd, SG_CACHE_SHADOW), 8796 &cur_col, 50); 8797 ahd_sg_state_print(ahd_inb(ahd, SG_STATE), &cur_col, 50); 8798 ahd_dffsxfrctl_print(ahd_inb(ahd, DFFSXFRCTL), &cur_col, 50); 8799 ahd_soffcnt_print(ahd_inb(ahd, SOFFCNT), &cur_col, 50); 8800 ahd_mdffstat_print(ahd_inb(ahd, MDFFSTAT), &cur_col, 50); 8801 if (cur_col > 50) { 8802 printf("\n"); 8803 cur_col = 0; 8804 } 8805 printf("\nSHADDR = 0x%x%x, SHCNT = 0x%x ", 8806 ahd_inl(ahd, SHADDR+4), 8807 ahd_inl(ahd, SHADDR), 8808 (ahd_inb(ahd, SHCNT) 8809 | (ahd_inb(ahd, SHCNT + 1) << 8) 8810 | (ahd_inb(ahd, SHCNT + 2) << 16))); 8811 printf("HADDR = 0x%x%x, HCNT = 0x%x \n", 8812 ahd_inl(ahd, HADDR+4), 8813 ahd_inl(ahd, HADDR), 8814 (ahd_inb(ahd, HCNT) 8815 | (ahd_inb(ahd, HCNT + 1) << 8) 8816 | (ahd_inb(ahd, HCNT + 2) << 16))); 8817 ahd_ccsgctl_print(ahd_inb(ahd, CCSGCTL), &cur_col, 50); 8818 #ifdef AHD_DEBUG 8819 if ((ahd_debug & AHD_SHOW_SG) != 0) { 8820 fifo_scb = ahd_lookup_scb(ahd, fifo_scbptr); 8821 if (fifo_scb != NULL) 8822 ahd_dump_sglist(fifo_scb); 8823 } 8824 #endif 8825 } 8826 printf("\nLQIN: "); 8827 for (i = 0; i < 20; i++) 8828 printf("0x%x ", ahd_inb(ahd, LQIN + i)); 8829 printf("\n"); 8830 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 8831 printf("%s: LQISTATE = 0x%x, LQOSTATE = 0x%x, OPTIONMODE = 0x%x\n", 8832 ahd_name(ahd), ahd_inb(ahd, LQISTATE), ahd_inb(ahd, LQOSTATE), 8833 ahd_inb(ahd, OPTIONMODE)); 8834 printf("%s: OS_SPACE_CNT = 0x%x MAXCMDCNT = 0x%x\n", 8835 ahd_name(ahd), ahd_inb(ahd, OS_SPACE_CNT), 8836 ahd_inb(ahd, MAXCMDCNT)); 8837 ahd_simode0_print(ahd_inb(ahd, SIMODE0), &cur_col, 50); 8838 printf("\n"); 8839 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 8840 cur_col = 0; 8841 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode); 8842 printf("%s: REG0 == 0x%x, SINDEX = 0x%x, DINDEX = 0x%x\n", 8843 ahd_name(ahd), ahd_inw(ahd, REG0), ahd_inw(ahd, SINDEX), 8844 ahd_inw(ahd, DINDEX)); 8845 printf("%s: SCBPTR == 0x%x, SCB_NEXT == 0x%x, SCB_NEXT2 == 0x%x\n", 8846 ahd_name(ahd), ahd_get_scbptr(ahd), 8847 ahd_inw_scbram(ahd, SCB_NEXT), 8848 ahd_inw_scbram(ahd, SCB_NEXT2)); 8849 printf("CDB %x %x %x %x %x %x\n", 8850 ahd_inb_scbram(ahd, SCB_CDB_STORE), 8851 ahd_inb_scbram(ahd, SCB_CDB_STORE+1), 8852 ahd_inb_scbram(ahd, SCB_CDB_STORE+2), 8853 ahd_inb_scbram(ahd, SCB_CDB_STORE+3), 8854 ahd_inb_scbram(ahd, SCB_CDB_STORE+4), 8855 ahd_inb_scbram(ahd, SCB_CDB_STORE+5)); 8856 printf("STACK:"); 8857 for (i = 0; i < ahd->stack_size; i++) { 8858 ahd->saved_stack[i] = 8859 ahd_inb(ahd, STACK)|(ahd_inb(ahd, STACK) << 8); 8860 printf(" 0x%x", ahd->saved_stack[i]); 8861 } 8862 for (i = ahd->stack_size-1; i >= 0; i--) { 8863 ahd_outb(ahd, STACK, ahd->saved_stack[i] & 0xFF); 8864 ahd_outb(ahd, STACK, (ahd->saved_stack[i] >> 8) & 0xFF); 8865 } 8866 printf("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n"); 8867 ahd_platform_dump_card_state(ahd); 8868 ahd_restore_modes(ahd, saved_modes); 8869 if (paused == 0) 8870 ahd_unpause(ahd); 8871 } 8872 8873 void 8874 ahd_dump_scbs(struct ahd_softc *ahd) 8875 { 8876 ahd_mode_state saved_modes; 8877 u_int saved_scb_index; 8878 int i; 8879 8880 saved_modes = ahd_save_modes(ahd); 8881 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 8882 saved_scb_index = ahd_get_scbptr(ahd); 8883 for (i = 0; i < AHD_SCB_MAX; i++) { 8884 ahd_set_scbptr(ahd, i); 8885 printf("%3d", i); 8886 printf("(CTRL 0x%x ID 0x%x N 0x%x N2 0x%x SG 0x%x, RSG 0x%x)\n", 8887 ahd_inb_scbram(ahd, SCB_CONTROL), 8888 ahd_inb_scbram(ahd, SCB_SCSIID), 8889 ahd_inw_scbram(ahd, SCB_NEXT), 8890 ahd_inw_scbram(ahd, SCB_NEXT2), 8891 ahd_inl_scbram(ahd, SCB_SGPTR), 8892 ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR)); 8893 } 8894 printf("\n"); 8895 ahd_set_scbptr(ahd, saved_scb_index); 8896 ahd_restore_modes(ahd, saved_modes); 8897 } 8898 8899 /**************************** Flexport Logic **********************************/ 8900 /* 8901 * Read count 16bit words from 16bit word address start_addr from the 8902 * SEEPROM attached to the controller, into buf, using the controller's 8903 * SEEPROM reading state machine. Optionally treat the data as a byte 8904 * stream in terms of byte order. 8905 */ 8906 int 8907 ahd_read_seeprom(struct ahd_softc *ahd, uint16_t *buf, 8908 u_int start_addr, u_int count, int bytestream) 8909 { 8910 u_int cur_addr; 8911 u_int end_addr; 8912 int error; 8913 8914 /* 8915 * If we never make it through the loop even once, 8916 * we were passed invalid arguments. 8917 */ 8918 error = EINVAL; 8919 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 8920 end_addr = start_addr + count; 8921 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) { 8922 8923 ahd_outb(ahd, SEEADR, cur_addr); 8924 ahd_outb(ahd, SEECTL, SEEOP_READ | SEESTART); 8925 8926 error = ahd_wait_seeprom(ahd); 8927 if (error) { 8928 printf("%s: ahd_wait_seeprom timed out\n", ahd_name(ahd)); 8929 break; 8930 } 8931 if (bytestream != 0) { 8932 uint8_t *bytestream_ptr; 8933 8934 bytestream_ptr = (uint8_t *)buf; 8935 *bytestream_ptr++ = ahd_inb(ahd, SEEDAT); 8936 *bytestream_ptr = ahd_inb(ahd, SEEDAT+1); 8937 } else { 8938 /* 8939 * ahd_inw() already handles machine byte order. 8940 */ 8941 *buf = ahd_inw(ahd, SEEDAT); 8942 } 8943 buf++; 8944 } 8945 return (error); 8946 } 8947 8948 /* 8949 * Write count 16bit words from buf, into SEEPROM attache to the 8950 * controller starting at 16bit word address start_addr, using the 8951 * controller's SEEPROM writing state machine. 8952 */ 8953 int 8954 ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *buf, 8955 u_int start_addr, u_int count) 8956 { 8957 u_int cur_addr; 8958 u_int end_addr; 8959 int error; 8960 int retval; 8961 8962 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 8963 error = ENOENT; 8964 8965 /* Place the chip into write-enable mode */ 8966 ahd_outb(ahd, SEEADR, SEEOP_EWEN_ADDR); 8967 ahd_outb(ahd, SEECTL, SEEOP_EWEN | SEESTART); 8968 error = ahd_wait_seeprom(ahd); 8969 if (error) 8970 return (error); 8971 8972 /* 8973 * Write the data. If we don't get throught the loop at 8974 * least once, the arguments were invalid. 8975 */ 8976 retval = EINVAL; 8977 end_addr = start_addr + count; 8978 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) { 8979 ahd_outw(ahd, SEEDAT, *buf++); 8980 ahd_outb(ahd, SEEADR, cur_addr); 8981 ahd_outb(ahd, SEECTL, SEEOP_WRITE | SEESTART); 8982 8983 retval = ahd_wait_seeprom(ahd); 8984 if (retval) 8985 break; 8986 } 8987 8988 /* 8989 * Disable writes. 8990 */ 8991 ahd_outb(ahd, SEEADR, SEEOP_EWDS_ADDR); 8992 ahd_outb(ahd, SEECTL, SEEOP_EWDS | SEESTART); 8993 error = ahd_wait_seeprom(ahd); 8994 if (error) 8995 return (error); 8996 return (retval); 8997 } 8998 8999 /* 9000 * Wait ~100us for the serial eeprom to satisfy our request. 9001 */ 9002 int 9003 ahd_wait_seeprom(struct ahd_softc *ahd) 9004 { 9005 int cnt; 9006 9007 cnt = 2000; 9008 while ((ahd_inb(ahd, SEESTAT) & (SEEARBACK|SEEBUSY)) != 0 && --cnt) 9009 ahd_delay(5); 9010 9011 if (cnt == 0) 9012 return (ETIMEDOUT); 9013 return (0); 9014 } 9015 9016 /* 9017 * Validate the two checksums in the per_channel 9018 * vital product data struct. 9019 */ 9020 int 9021 ahd_verify_vpd_cksum(struct vpd_config *vpd) 9022 { 9023 int i; 9024 int maxaddr; 9025 uint32_t checksum; 9026 uint8_t *vpdarray; 9027 9028 vpdarray = (uint8_t *)vpd; 9029 maxaddr = offsetof(struct vpd_config, vpd_checksum); 9030 checksum = 0; 9031 for (i = offsetof(struct vpd_config, resource_type); i < maxaddr; i++) 9032 checksum = checksum + vpdarray[i]; 9033 if (checksum == 0 9034 || (-checksum & 0xFF) != vpd->vpd_checksum) 9035 return (0); 9036 9037 checksum = 0; 9038 maxaddr = offsetof(struct vpd_config, checksum); 9039 for (i = offsetof(struct vpd_config, default_target_flags); 9040 i < maxaddr; i++) 9041 checksum = checksum + vpdarray[i]; 9042 if (checksum == 0 9043 || (-checksum & 0xFF) != vpd->checksum) 9044 return (0); 9045 return (1); 9046 } 9047 9048 int 9049 ahd_verify_cksum(struct seeprom_config *sc) 9050 { 9051 int i; 9052 int maxaddr; 9053 uint32_t checksum; 9054 uint16_t *scarray; 9055 9056 maxaddr = (sizeof(*sc)/2) - 1; 9057 checksum = 0; 9058 scarray = (uint16_t *)sc; 9059 9060 for (i = 0; i < maxaddr; i++) 9061 checksum = checksum + scarray[i]; 9062 if (checksum == 0 9063 || (checksum & 0xFFFF) != sc->checksum) { 9064 return (0); 9065 } else { 9066 return (1); 9067 } 9068 } 9069 9070 int 9071 ahd_acquire_seeprom(struct ahd_softc *ahd) 9072 { 9073 /* 9074 * We should be able to determine the SEEPROM type 9075 * from the flexport logic, but unfortunately not 9076 * all implementations have this logic and there is 9077 * no programatic method for determining if the logic 9078 * is present. 9079 */ 9080 9081 return (1); 9082 #if 0 9083 uint8_t seetype; 9084 int error; 9085 9086 error = ahd_read_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, &seetype); 9087 if (error != 0 9088 || ((seetype & FLX_ROMSTAT_SEECFG) == FLX_ROMSTAT_SEE_NONE)) 9089 return (0); 9090 return (1); 9091 #endif 9092 } 9093 9094 void 9095 ahd_release_seeprom(struct ahd_softc *ahd) 9096 { 9097 /* Currently a no-op */ 9098 } 9099 9100 int 9101 ahd_write_flexport(struct ahd_softc *ahd, u_int addr, u_int value) 9102 { 9103 int error; 9104 9105 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9106 if (addr > 7) 9107 panic("ahd_write_flexport: address out of range"); 9108 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3)); 9109 error = ahd_wait_flexport(ahd); 9110 if (error != 0) 9111 return (error); 9112 ahd_outb(ahd, BRDDAT, value); 9113 ahd_flush_device_writes(ahd); 9114 ahd_outb(ahd, BRDCTL, BRDSTB|BRDEN|(addr << 3)); 9115 ahd_flush_device_writes(ahd); 9116 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3)); 9117 ahd_flush_device_writes(ahd); 9118 ahd_outb(ahd, BRDCTL, 0); 9119 ahd_flush_device_writes(ahd); 9120 return (0); 9121 } 9122 9123 int 9124 ahd_read_flexport(struct ahd_softc *ahd, u_int addr, uint8_t *value) 9125 { 9126 int error; 9127 9128 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9129 if (addr > 7) 9130 panic("ahd_read_flexport: address out of range"); 9131 ahd_outb(ahd, BRDCTL, BRDRW|BRDEN|(addr << 3)); 9132 error = ahd_wait_flexport(ahd); 9133 if (error != 0) 9134 return (error); 9135 *value = ahd_inb(ahd, BRDDAT); 9136 ahd_outb(ahd, BRDCTL, 0); 9137 ahd_flush_device_writes(ahd); 9138 return (0); 9139 } 9140 9141 /* 9142 * Wait at most 2 seconds for flexport arbitration to succeed. 9143 */ 9144 int 9145 ahd_wait_flexport(struct ahd_softc *ahd) 9146 { 9147 int cnt; 9148 9149 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9150 cnt = 1000000 * 2 / 5; 9151 while ((ahd_inb(ahd, BRDCTL) & FLXARBACK) == 0 && --cnt) 9152 ahd_delay(5); 9153 9154 if (cnt == 0) 9155 return (ETIMEDOUT); 9156 return (0); 9157 } 9158 9159 /************************* Target Mode ****************************************/ 9160 #ifdef AHD_TARGET_MODE 9161 cam_status 9162 ahd_find_tmode_devs(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb, 9163 struct ahd_tmode_tstate **tstate, 9164 struct ahd_tmode_lstate **lstate, 9165 int notfound_failure) 9166 { 9167 9168 if ((ahd->features & AHD_TARGETMODE) == 0) 9169 return (CAM_REQ_INVALID); 9170 9171 /* 9172 * Handle the 'black hole' device that sucks up 9173 * requests to unattached luns on enabled targets. 9174 */ 9175 if (ccb->ccb_h.target_id == CAM_TARGET_WILDCARD 9176 && ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) { 9177 *tstate = NULL; 9178 *lstate = ahd->black_hole; 9179 } else { 9180 u_int max_id; 9181 9182 max_id = (ahd->features & AHD_WIDE) ? 15 : 7; 9183 if (ccb->ccb_h.target_id > max_id) 9184 return (CAM_TID_INVALID); 9185 9186 if (ccb->ccb_h.target_lun >= AHD_NUM_LUNS) 9187 return (CAM_LUN_INVALID); 9188 9189 *tstate = ahd->enabled_targets[ccb->ccb_h.target_id]; 9190 *lstate = NULL; 9191 if (*tstate != NULL) 9192 *lstate = 9193 (*tstate)->enabled_luns[ccb->ccb_h.target_lun]; 9194 } 9195 9196 if (notfound_failure != 0 && *lstate == NULL) 9197 return (CAM_PATH_INVALID); 9198 9199 return (CAM_REQ_CMP); 9200 } 9201 9202 void 9203 ahd_handle_en_lun(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb) 9204 { 9205 #if NOT_YET 9206 struct ahd_tmode_tstate *tstate; 9207 struct ahd_tmode_lstate *lstate; 9208 struct ccb_en_lun *cel; 9209 cam_status status; 9210 u_int target; 9211 u_int lun; 9212 u_int target_mask; 9213 u_long s; 9214 char channel; 9215 9216 status = ahd_find_tmode_devs(ahd, sim, ccb, &tstate, &lstate, 9217 /*notfound_failure*/FALSE); 9218 9219 if (status != CAM_REQ_CMP) { 9220 ccb->ccb_h.status = status; 9221 return; 9222 } 9223 9224 if ((ahd->features & AHD_MULTIROLE) != 0) { 9225 u_int our_id; 9226 9227 our_id = ahd->our_id; 9228 if (ccb->ccb_h.target_id != our_id) { 9229 if ((ahd->features & AHD_MULTI_TID) != 0 9230 && (ahd->flags & AHD_INITIATORROLE) != 0) { 9231 /* 9232 * Only allow additional targets if 9233 * the initiator role is disabled. 9234 * The hardware cannot handle a re-select-in 9235 * on the initiator id during a re-select-out 9236 * on a different target id. 9237 */ 9238 status = CAM_TID_INVALID; 9239 } else if ((ahd->flags & AHD_INITIATORROLE) != 0 9240 || ahd->enabled_luns > 0) { 9241 /* 9242 * Only allow our target id to change 9243 * if the initiator role is not configured 9244 * and there are no enabled luns which 9245 * are attached to the currently registered 9246 * scsi id. 9247 */ 9248 status = CAM_TID_INVALID; 9249 } 9250 } 9251 } 9252 9253 if (status != CAM_REQ_CMP) { 9254 ccb->ccb_h.status = status; 9255 return; 9256 } 9257 9258 /* 9259 * We now have an id that is valid. 9260 * If we aren't in target mode, switch modes. 9261 */ 9262 if ((ahd->flags & AHD_TARGETROLE) == 0 9263 && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) { 9264 u_long s; 9265 9266 printf("Configuring Target Mode\n"); 9267 ahd_lock(ahd, &s); 9268 if (LIST_FIRST(&ahd->pending_scbs) != NULL) { 9269 ccb->ccb_h.status = CAM_BUSY; 9270 ahd_unlock(ahd, &s); 9271 return; 9272 } 9273 ahd->flags |= AHD_TARGETROLE; 9274 if ((ahd->features & AHD_MULTIROLE) == 0) 9275 ahd->flags &= ~AHD_INITIATORROLE; 9276 ahd_pause(ahd); 9277 ahd_loadseq(ahd); 9278 ahd_restart(ahd); 9279 ahd_unlock(ahd, &s); 9280 } 9281 cel = &ccb->cel; 9282 target = ccb->ccb_h.target_id; 9283 lun = ccb->ccb_h.target_lun; 9284 channel = SIM_CHANNEL(ahd, sim); 9285 target_mask = 0x01 << target; 9286 if (channel == 'B') 9287 target_mask <<= 8; 9288 9289 if (cel->enable != 0) { 9290 u_int scsiseq1; 9291 9292 /* Are we already enabled?? */ 9293 if (lstate != NULL) { 9294 xpt_print_path(ccb->ccb_h.path); 9295 printf("Lun already enabled\n"); 9296 ccb->ccb_h.status = CAM_LUN_ALRDY_ENA; 9297 return; 9298 } 9299 9300 if (cel->grp6_len != 0 9301 || cel->grp7_len != 0) { 9302 /* 9303 * Don't (yet?) support vendor 9304 * specific commands. 9305 */ 9306 ccb->ccb_h.status = CAM_REQ_INVALID; 9307 printf("Non-zero Group Codes\n"); 9308 return; 9309 } 9310 9311 /* 9312 * Seems to be okay. 9313 * Setup our data structures. 9314 */ 9315 if (target != CAM_TARGET_WILDCARD && tstate == NULL) { 9316 tstate = ahd_alloc_tstate(ahd, target, channel); 9317 if (tstate == NULL) { 9318 xpt_print_path(ccb->ccb_h.path); 9319 printf("Couldn't allocate tstate\n"); 9320 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 9321 return; 9322 } 9323 } 9324 lstate = malloc(sizeof(*lstate), M_DEVBUF, M_NOWAIT); 9325 if (lstate == NULL) { 9326 xpt_print_path(ccb->ccb_h.path); 9327 printf("Couldn't allocate lstate\n"); 9328 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 9329 return; 9330 } 9331 memset(lstate, 0, sizeof(*lstate)); 9332 status = xpt_create_path(&lstate->path, /*periph*/NULL, 9333 xpt_path_path_id(ccb->ccb_h.path), 9334 xpt_path_target_id(ccb->ccb_h.path), 9335 xpt_path_lun_id(ccb->ccb_h.path)); 9336 if (status != CAM_REQ_CMP) { 9337 free(lstate, M_DEVBUF); 9338 xpt_print_path(ccb->ccb_h.path); 9339 printf("Couldn't allocate path\n"); 9340 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 9341 return; 9342 } 9343 SLIST_INIT(&lstate->accept_tios); 9344 SLIST_INIT(&lstate->immed_notifies); 9345 ahd_lock(ahd, &s); 9346 ahd_pause(ahd); 9347 if (target != CAM_TARGET_WILDCARD) { 9348 tstate->enabled_luns[lun] = lstate; 9349 ahd->enabled_luns++; 9350 9351 if ((ahd->features & AHD_MULTI_TID) != 0) { 9352 u_int targid_mask; 9353 9354 targid_mask = ahd_inb(ahd, TARGID) 9355 | (ahd_inb(ahd, TARGID + 1) << 8); 9356 9357 targid_mask |= target_mask; 9358 ahd_outb(ahd, TARGID, targid_mask); 9359 ahd_outb(ahd, TARGID+1, (targid_mask >> 8)); 9360 9361 ahd_update_scsiid(ahd, targid_mask); 9362 } else { 9363 u_int our_id; 9364 char channel; 9365 9366 channel = SIM_CHANNEL(ahd, sim); 9367 our_id = SIM_SCSI_ID(ahd, sim); 9368 9369 /* 9370 * This can only happen if selections 9371 * are not enabled 9372 */ 9373 if (target != our_id) { 9374 u_int sblkctl; 9375 char cur_channel; 9376 int swap; 9377 9378 sblkctl = ahd_inb(ahd, SBLKCTL); 9379 cur_channel = (sblkctl & SELBUSB) 9380 ? 'B' : 'A'; 9381 if ((ahd->features & AHD_TWIN) == 0) 9382 cur_channel = 'A'; 9383 swap = cur_channel != channel; 9384 ahd->our_id = target; 9385 9386 if (swap) 9387 ahd_outb(ahd, SBLKCTL, 9388 sblkctl ^ SELBUSB); 9389 9390 ahd_outb(ahd, SCSIID, target); 9391 9392 if (swap) 9393 ahd_outb(ahd, SBLKCTL, sblkctl); 9394 } 9395 } 9396 } else 9397 ahd->black_hole = lstate; 9398 /* Allow select-in operations */ 9399 if (ahd->black_hole != NULL && ahd->enabled_luns > 0) { 9400 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 9401 scsiseq1 |= ENSELI; 9402 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1); 9403 scsiseq1 = ahd_inb(ahd, SCSISEQ1); 9404 scsiseq1 |= ENSELI; 9405 ahd_outb(ahd, SCSISEQ1, scsiseq1); 9406 } 9407 ahd_unpause(ahd); 9408 ahd_unlock(ahd, &s); 9409 ccb->ccb_h.status = CAM_REQ_CMP; 9410 xpt_print_path(ccb->ccb_h.path); 9411 printf("Lun now enabled for target mode\n"); 9412 } else { 9413 struct scb *scb; 9414 int i, empty; 9415 9416 if (lstate == NULL) { 9417 ccb->ccb_h.status = CAM_LUN_INVALID; 9418 return; 9419 } 9420 9421 ahd_lock(ahd, &s); 9422 9423 ccb->ccb_h.status = CAM_REQ_CMP; 9424 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 9425 struct ccb_hdr *ccbh; 9426 9427 ccbh = &scb->io_ctx->ccb_h; 9428 if (ccbh->func_code == XPT_CONT_TARGET_IO 9429 && !xpt_path_comp(ccbh->path, ccb->ccb_h.path)){ 9430 printf("CTIO pending\n"); 9431 ccb->ccb_h.status = CAM_REQ_INVALID; 9432 ahd_unlock(ahd, &s); 9433 return; 9434 } 9435 } 9436 9437 if (SLIST_FIRST(&lstate->accept_tios) != NULL) { 9438 printf("ATIOs pending\n"); 9439 ccb->ccb_h.status = CAM_REQ_INVALID; 9440 } 9441 9442 if (SLIST_FIRST(&lstate->immed_notifies) != NULL) { 9443 printf("INOTs pending\n"); 9444 ccb->ccb_h.status = CAM_REQ_INVALID; 9445 } 9446 9447 if (ccb->ccb_h.status != CAM_REQ_CMP) { 9448 ahd_unlock(ahd, &s); 9449 return; 9450 } 9451 9452 xpt_print_path(ccb->ccb_h.path); 9453 printf("Target mode disabled\n"); 9454 xpt_free_path(lstate->path); 9455 free(lstate, M_DEVBUF); 9456 9457 ahd_pause(ahd); 9458 /* Can we clean up the target too? */ 9459 if (target != CAM_TARGET_WILDCARD) { 9460 tstate->enabled_luns[lun] = NULL; 9461 ahd->enabled_luns--; 9462 for (empty = 1, i = 0; i < 8; i++) 9463 if (tstate->enabled_luns[i] != NULL) { 9464 empty = 0; 9465 break; 9466 } 9467 9468 if (empty) { 9469 ahd_free_tstate(ahd, target, channel, 9470 /*force*/FALSE); 9471 if (ahd->features & AHD_MULTI_TID) { 9472 u_int targid_mask; 9473 9474 targid_mask = ahd_inb(ahd, TARGID) 9475 | (ahd_inb(ahd, TARGID + 1) 9476 << 8); 9477 9478 targid_mask &= ~target_mask; 9479 ahd_outb(ahd, TARGID, targid_mask); 9480 ahd_outb(ahd, TARGID+1, 9481 (targid_mask >> 8)); 9482 ahd_update_scsiid(ahd, targid_mask); 9483 } 9484 } 9485 } else { 9486 9487 ahd->black_hole = NULL; 9488 9489 /* 9490 * We can't allow selections without 9491 * our black hole device. 9492 */ 9493 empty = TRUE; 9494 } 9495 if (ahd->enabled_luns == 0) { 9496 /* Disallow select-in */ 9497 u_int scsiseq1; 9498 9499 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 9500 scsiseq1 &= ~ENSELI; 9501 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1); 9502 scsiseq1 = ahd_inb(ahd, SCSISEQ1); 9503 scsiseq1 &= ~ENSELI; 9504 ahd_outb(ahd, SCSISEQ1, scsiseq1); 9505 9506 if ((ahd->features & AHD_MULTIROLE) == 0) { 9507 printf("Configuring Initiator Mode\n"); 9508 ahd->flags &= ~AHD_TARGETROLE; 9509 ahd->flags |= AHD_INITIATORROLE; 9510 ahd_pause(ahd); 9511 ahd_loadseq(ahd); 9512 ahd_restart(ahd); 9513 /* 9514 * Unpaused. The extra unpause 9515 * that follows is harmless. 9516 */ 9517 } 9518 } 9519 ahd_unpause(ahd); 9520 ahd_unlock(ahd, &s); 9521 } 9522 #endif 9523 } 9524 9525 static void 9526 ahd_update_scsiid(struct ahd_softc *ahd, u_int targid_mask) 9527 { 9528 #if NOT_YET 9529 u_int scsiid_mask; 9530 u_int scsiid; 9531 9532 if ((ahd->features & AHD_MULTI_TID) == 0) 9533 panic("ahd_update_scsiid called on non-multitid unit\n"); 9534 9535 /* 9536 * Since we will rely on the TARGID mask 9537 * for selection enables, ensure that OID 9538 * in SCSIID is not set to some other ID 9539 * that we don't want to allow selections on. 9540 */ 9541 if ((ahd->features & AHD_ULTRA2) != 0) 9542 scsiid = ahd_inb(ahd, SCSIID_ULTRA2); 9543 else 9544 scsiid = ahd_inb(ahd, SCSIID); 9545 scsiid_mask = 0x1 << (scsiid & OID); 9546 if ((targid_mask & scsiid_mask) == 0) { 9547 u_int our_id; 9548 9549 /* ffs counts from 1 */ 9550 our_id = ffs(targid_mask); 9551 if (our_id == 0) 9552 our_id = ahd->our_id; 9553 else 9554 our_id--; 9555 scsiid &= TID; 9556 scsiid |= our_id; 9557 } 9558 if ((ahd->features & AHD_ULTRA2) != 0) 9559 ahd_outb(ahd, SCSIID_ULTRA2, scsiid); 9560 else 9561 ahd_outb(ahd, SCSIID, scsiid); 9562 #endif 9563 } 9564 9565 #ifdef AHD_TARGET_MODE 9566 void 9567 ahd_run_tqinfifo(struct ahd_softc *ahd, int paused) 9568 { 9569 struct target_cmd *cmd; 9570 9571 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_POSTREAD); 9572 while ((cmd = &ahd->targetcmds[ahd->tqinfifonext])->cmd_valid != 0) { 9573 9574 /* 9575 * Only advance through the queue if we 9576 * have the resources to process the command. 9577 */ 9578 if (ahd_handle_target_cmd(ahd, cmd) != 0) 9579 break; 9580 9581 cmd->cmd_valid = 0; 9582 ahd_dmamap_sync(ahd, ahd->parent_dmat /*shared_data_dmat*/, 9583 ahd->shared_data_map.dmamap, 9584 ahd_targetcmd_offset(ahd, ahd->tqinfifonext), 9585 sizeof(struct target_cmd), 9586 BUS_DMASYNC_PREREAD); 9587 ahd->tqinfifonext++; 9588 9589 /* 9590 * Lazily update our position in the target mode incoming 9591 * command queue as seen by the sequencer. 9592 */ 9593 if ((ahd->tqinfifonext & (HOST_TQINPOS - 1)) == 1) { 9594 u_int hs_mailbox; 9595 9596 hs_mailbox = ahd_inb(ahd, HS_MAILBOX); 9597 hs_mailbox &= ~HOST_TQINPOS; 9598 hs_mailbox |= ahd->tqinfifonext & HOST_TQINPOS; 9599 ahd_outb(ahd, HS_MAILBOX, hs_mailbox); 9600 } 9601 } 9602 } 9603 #endif 9604 9605 static int 9606 ahd_handle_target_cmd(struct ahd_softc *ahd, struct target_cmd *cmd) 9607 { 9608 struct ahd_tmode_tstate *tstate; 9609 struct ahd_tmode_lstate *lstate; 9610 struct ccb_accept_tio *atio; 9611 uint8_t *byte; 9612 int initiator; 9613 int target; 9614 int lun; 9615 9616 initiator = SCSIID_TARGET(ahd, cmd->scsiid); 9617 target = SCSIID_OUR_ID(cmd->scsiid); 9618 lun = (cmd->identify & MSG_IDENTIFY_LUNMASK); 9619 9620 byte = cmd->bytes; 9621 tstate = ahd->enabled_targets[target]; 9622 lstate = NULL; 9623 if (tstate != NULL) 9624 lstate = tstate->enabled_luns[lun]; 9625 9626 /* 9627 * Commands for disabled luns go to the black hole driver. 9628 */ 9629 if (lstate == NULL) 9630 lstate = ahd->black_hole; 9631 9632 atio = (struct ccb_accept_tio*)SLIST_FIRST(&lstate->accept_tios); 9633 if (atio == NULL) { 9634 ahd->flags |= AHD_TQINFIFO_BLOCKED; 9635 /* 9636 * Wait for more ATIOs from the peripheral driver for this lun. 9637 */ 9638 return (1); 9639 } else 9640 ahd->flags &= ~AHD_TQINFIFO_BLOCKED; 9641 #ifdef AHD_DEBUG 9642 if ((ahd_debug & AHD_SHOW_TQIN) != 0) 9643 printf("%s: incoming command from %d for %d:%d%s\n", 9644 ahd_name(ahd), 9645 initiator, target, lun, 9646 lstate == ahd->black_hole ? "(Black Holed)" : ""); 9647 #endif 9648 SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle); 9649 9650 if (lstate == ahd->black_hole) { 9651 /* Fill in the wildcards */ 9652 atio->ccb_h.target_id = target; 9653 atio->ccb_h.target_lun = lun; 9654 } 9655 9656 /* 9657 * Package it up and send it off to 9658 * whomever has this lun enabled. 9659 */ 9660 atio->sense_len = 0; 9661 atio->init_id = initiator; 9662 if (byte[0] != 0xFF) { 9663 /* Tag was included */ 9664 atio->tag_action = *byte++; 9665 atio->tag_id = *byte++; 9666 atio->ccb_h.flags = CAM_TAG_ACTION_VALID; 9667 } else { 9668 atio->ccb_h.flags = 0; 9669 } 9670 byte++; 9671 9672 /* Okay. Now determine the cdb size based on the command code */ 9673 switch (*byte >> CMD_GROUP_CODE_SHIFT) { 9674 case 0: 9675 atio->cdb_len = 6; 9676 break; 9677 case 1: 9678 case 2: 9679 atio->cdb_len = 10; 9680 break; 9681 case 4: 9682 atio->cdb_len = 16; 9683 break; 9684 case 5: 9685 atio->cdb_len = 12; 9686 break; 9687 case 3: 9688 default: 9689 /* Only copy the opcode. */ 9690 atio->cdb_len = 1; 9691 printf("Reserved or VU command code type encountered\n"); 9692 break; 9693 } 9694 9695 memcpy(atio->cdb_io.cdb_bytes, byte, atio->cdb_len); 9696 9697 atio->ccb_h.status |= CAM_CDB_RECVD; 9698 9699 if ((cmd->identify & MSG_IDENTIFY_DISCFLAG) == 0) { 9700 /* 9701 * We weren't allowed to disconnect. 9702 * We're hanging on the bus until a 9703 * continue target I/O comes in response 9704 * to this accept tio. 9705 */ 9706 #ifdef AHD_DEBUG 9707 if ((ahd_debug & AHD_SHOW_TQIN) != 0) 9708 printf("Received Immediate Command %d:%d:%d - %p\n", 9709 initiator, target, lun, ahd->pending_device); 9710 #endif 9711 ahd->pending_device = lstate; 9712 ahd_freeze_ccb((union ccb *)atio); 9713 atio->ccb_h.flags |= CAM_DIS_DISCONNECT; 9714 } 9715 xpt_done((union ccb*)atio); 9716 return (0); 9717 } 9718 9719 #endif 9720 9721 static int 9722 ahd_createdmamem(tag, size, flags, mapp, vaddr, baddr, seg, nseg, myname, what) 9723 bus_dma_tag_t tag; 9724 int size; 9725 int flags; 9726 bus_dmamap_t *mapp; 9727 caddr_t *vaddr; 9728 bus_addr_t *baddr; 9729 bus_dma_segment_t *seg; 9730 int *nseg; 9731 const char *myname, *what; 9732 { 9733 int error, level = 0; 9734 9735 if ((error = bus_dmamem_alloc(tag, size, PAGE_SIZE, 0, 9736 seg, 1, nseg, BUS_DMA_NOWAIT)) != 0) { 9737 printf("%s: failed to allocate DMA mem for %s, error = %d\n", 9738 myname, what, error); 9739 goto out; 9740 } 9741 level++; 9742 9743 if ((error = bus_dmamem_map(tag, seg, *nseg, size, vaddr, 9744 BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) { 9745 printf("%s: failed to map DMA mem for %s, error = %d\n", 9746 myname, what, error); 9747 goto out; 9748 } 9749 level++; 9750 9751 if ((error = bus_dmamap_create(tag, size, 1, size, 0, 9752 BUS_DMA_NOWAIT | flags, mapp)) != 0) { 9753 printf("%s: failed to create DMA map for %s, error = %d\n", 9754 myname, what, error); 9755 goto out; 9756 } 9757 level++; 9758 9759 9760 if ((error = bus_dmamap_load(tag, *mapp, *vaddr, size, NULL, 9761 BUS_DMA_NOWAIT)) != 0) { 9762 printf("%s: failed to load DMA map for %s, error = %d\n", 9763 myname, what, error); 9764 goto out; 9765 } 9766 9767 *baddr = (*mapp)->dm_segs[0].ds_addr; 9768 9769 return 0; 9770 out: 9771 printf("ahd_createdmamem error (%d)\n", level); 9772 switch (level) { 9773 case 3: 9774 bus_dmamap_destroy(tag, *mapp); 9775 /* FALLTHROUGH */ 9776 case 2: 9777 bus_dmamem_unmap(tag, *vaddr, size); 9778 /* FALLTHROUGH */ 9779 case 1: 9780 bus_dmamem_free(tag, seg, *nseg); 9781 break; 9782 default: 9783 break; 9784 } 9785 9786 return error; 9787 } 9788 9789 static void 9790 ahd_freedmamem(tag, size, map, vaddr, seg, nseg) 9791 bus_dma_tag_t tag; 9792 int size; 9793 bus_dmamap_t map; 9794 caddr_t vaddr; 9795 bus_dma_segment_t *seg; 9796 int nseg; 9797 { 9798 9799 bus_dmamap_unload(tag, map); 9800 bus_dmamap_destroy(tag, map); 9801 bus_dmamem_unmap(tag, vaddr, size); 9802 bus_dmamem_free(tag, seg, nseg); 9803 } 9804