xref: /netbsd-src/sys/dev/ic/aic77xx.c (revision 404fbe5fb94ca1e054339640cabb2801ce52dd30)
1 /*	$NetBSD: aic77xx.c,v 1.7 2007/10/19 11:59:46 ad Exp $	*/
2 
3 /*
4  * Common routines for AHA-27/284X and aic7770 motherboard SCSI controllers.
5  *
6  * Copyright (c) 1994, 1995, 1996, 1997, 1998 Justin T. Gibbs.
7  * All rights reserved.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice immediately at the beginning of the file, without modification,
14  *    this list of conditions, and the following disclaimer.
15  * 2. The name of the author may not be used to endorse or promote products
16  *    derived from this software without specific prior written permission.
17  *
18  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
22  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28  * SUCH DAMAGE.
29  *
30  * $FreeBSD: src/sys/dev/aic7xxx/ahc_eisa.c,v 1.15 2000/01/29 14:22:19 peter Exp $
31  */
32 
33 #include <sys/cdefs.h>
34 __KERNEL_RCSID(0, "$NetBSD: aic77xx.c,v 1.7 2007/10/19 11:59:46 ad Exp $");
35 
36 #include <sys/param.h>
37 #include <sys/systm.h>
38 #include <sys/device.h>
39 
40 #include <sys/bus.h>
41 #include <sys/intr.h>
42 
43 #include <dev/scsipi/scsi_all.h>
44 #include <dev/scsipi/scsipi_all.h>
45 #include <dev/scsipi/scsiconf.h>
46 
47 #include <dev/ic/aic7xxx_osm.h>
48 #include <dev/ic/aic7xxx_inline.h>
49 #include <dev/ic/aic77xxreg.h>
50 #include <dev/ic/aic77xxvar.h>
51 
52 /*
53  * Return irq setting of the board, otherwise -1.
54  */
55 int
56 ahc_aic77xx_irq(iot, ioh)
57 	bus_space_tag_t iot;
58 	bus_space_handle_t ioh;
59 {
60 	int irq;
61 	u_int8_t intdef;
62 	u_int8_t hcntrl;
63 
64 	/* Pause the card preseving the IRQ type */
65 	hcntrl = bus_space_read_1(iot, ioh, HCNTRL) & IRQMS;
66 	bus_space_write_1(iot, ioh, HCNTRL, hcntrl | PAUSE);
67 
68 	intdef = bus_space_read_1(iot, ioh, INTDEF);
69 	irq = (intdef & INTDEF_IRQ_MASK);
70 	switch (irq) {
71 	case 9:
72 	case 10:
73 	case 11:
74 	case 12:
75 	case 14:
76 	case 15:
77 		break;
78 	default:
79 		printf("ahc_aic77xx_irq: illegal irq setting %d\n", intdef);
80 		return (-1);
81 	}
82 
83 	return (irq);
84 }
85 
86 int
87 ahc_aic77xx_attach(ahc)
88 	struct ahc_softc *ahc;
89 {
90 	u_int8_t sblkctl;
91 	u_int8_t sblkctl_orig;
92 	u_int8_t hostconf;
93 
94 	/*
95 	 * See if we have a Rev E or higher aic7770. Anything below a
96 	 * Rev E will have a R/O autoflush disable configuration bit.
97 	 */
98 	sblkctl_orig = ahc_inb(ahc, SBLKCTL);
99 	sblkctl = sblkctl_orig ^ AUTOFLUSHDIS;
100 	ahc_outb(ahc, SBLKCTL, sblkctl);
101 	sblkctl = ahc_inb(ahc, SBLKCTL);
102 	if (sblkctl != sblkctl_orig) {
103 		printf("%s: aic7770 >= Rev E: R/O autoflush enabled\n",
104 		    ahc_name(ahc));
105 		/*
106 		 * Ensure autoflush is enabled
107 		 */
108 		sblkctl &= ~AUTOFLUSHDIS;
109 		ahc_outb(ahc, SBLKCTL, sblkctl);
110 	}
111 
112 	/* Setup the FIFO threshold and the bus off time */
113 	hostconf = ahc_inb(ahc, HOSTCONF);
114 	ahc_outb(ahc, BUSSPD, hostconf & DFTHRSH);
115 	ahc_outb(ahc, BUSTIME, (hostconf << 2) & BOFF);
116 
117 	/*
118 	 * Generic aic7xxx initialization.
119 	 */
120 	if (ahc_init(ahc)) {
121 		/*
122 		 * The board's IRQ line is not yet enabled so it's safe
123 		 * to release the irq.
124 		 */
125 		return (ENXIO);
126 	}
127 
128 	/*
129 	 * Enable the board's BUS drivers
130 	 */
131 	ahc_outb(ahc, BCTL, ENABLE);
132 
133 	/* Attach sub-devices - always succeeds */
134 	ahc_attach(ahc);
135 
136 	return 0;
137 }
138