1 /* $NetBSD: max6900.c,v 1.5 2006/03/29 06:41:24 thorpej Exp $ */ 2 3 /* 4 * Copyright (c) 2003 Wasabi Systems, Inc. 5 * All rights reserved. 6 * 7 * Written by Steve C. Woodford and Jason R. Thorpe for Wasabi Systems, Inc. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. All advertising materials mentioning features or use of this software 18 * must display the following acknowledgement: 19 * This product includes software developed for the NetBSD Project by 20 * Wasabi Systems, Inc. 21 * 4. The name of Wasabi Systems, Inc. may not be used to endorse 22 * or promote products derived from this software without specific prior 23 * written permission. 24 * 25 * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND 26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 27 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC 29 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 35 * POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38 #include <sys/param.h> 39 #include <sys/systm.h> 40 #include <sys/device.h> 41 #include <sys/kernel.h> 42 #include <sys/fcntl.h> 43 #include <sys/uio.h> 44 #include <sys/conf.h> 45 #include <sys/event.h> 46 47 #include <dev/clock_subr.h> 48 49 #include <dev/i2c/i2cvar.h> 50 #include <dev/i2c/max6900reg.h> 51 52 struct maxrtc_softc { 53 struct device sc_dev; 54 i2c_tag_t sc_tag; 55 int sc_address; 56 int sc_open; 57 struct todr_chip_handle sc_todr; 58 }; 59 60 static int maxrtc_match(struct device *, struct cfdata *, void *); 61 static void maxrtc_attach(struct device *, struct device *, void *); 62 63 CFATTACH_DECL(maxrtc, sizeof(struct maxrtc_softc), 64 maxrtc_match, maxrtc_attach, NULL, NULL); 65 extern struct cfdriver maxrtc_cd; 66 67 dev_type_open(maxrtc_open); 68 dev_type_close(maxrtc_close); 69 dev_type_read(maxrtc_read); 70 dev_type_write(maxrtc_write); 71 72 const struct cdevsw maxrtc_cdevsw = { 73 maxrtc_open, maxrtc_close, maxrtc_read, maxrtc_write, noioctl, 74 nostop, notty, nopoll, nommap, nokqfilter 75 }; 76 77 static int maxrtc_clock_read(struct maxrtc_softc *, struct clock_ymdhms *); 78 static int maxrtc_clock_write(struct maxrtc_softc *, struct clock_ymdhms *); 79 static int maxrtc_gettime(struct todr_chip_handle *, volatile struct timeval *); 80 static int maxrtc_settime(struct todr_chip_handle *, volatile struct timeval *); 81 static int maxrtc_getcal(struct todr_chip_handle *, int *); 82 static int maxrtc_setcal(struct todr_chip_handle *, int); 83 84 int 85 maxrtc_match(struct device *parent, struct cfdata *cf, void *aux) 86 { 87 struct i2c_attach_args *ia = aux; 88 89 if ((ia->ia_addr & MAX6900_ADDRMASK) == MAX6900_ADDR) 90 return (1); 91 92 return (0); 93 } 94 95 void 96 maxrtc_attach(struct device *parent, struct device *self, void *aux) 97 { 98 struct maxrtc_softc *sc = device_private(self); 99 struct i2c_attach_args *ia = aux; 100 101 sc->sc_tag = ia->ia_tag; 102 sc->sc_address = ia->ia_addr; 103 104 aprint_naive(": Real-time Clock/NVRAM\n"); 105 aprint_normal(": MAX6900 Real-time Clock/NVRAM\n"); 106 107 sc->sc_open = 0; 108 109 sc->sc_todr.cookie = sc; 110 sc->sc_todr.todr_gettime = maxrtc_gettime; 111 sc->sc_todr.todr_settime = maxrtc_settime; 112 sc->sc_todr.todr_getcal = maxrtc_getcal; 113 sc->sc_todr.todr_setcal = maxrtc_setcal; 114 sc->sc_todr.todr_setwen = NULL; 115 116 todr_attach(&sc->sc_todr); 117 } 118 119 /*ARGSUSED*/ 120 int 121 maxrtc_open(dev_t dev, int flag, int fmt, struct lwp *l) 122 { 123 struct maxrtc_softc *sc; 124 125 if ((sc = device_lookup(&maxrtc_cd, minor(dev))) == NULL) 126 return (ENXIO); 127 128 /* XXX: Locking */ 129 130 if (sc->sc_open) 131 return (EBUSY); 132 133 sc->sc_open = 1; 134 return (0); 135 } 136 137 /*ARGSUSED*/ 138 int 139 maxrtc_close(dev_t dev, int flag, int fmt, struct lwp *l) 140 { 141 struct maxrtc_softc *sc; 142 143 if ((sc = device_lookup(&maxrtc_cd, minor(dev))) == NULL) 144 return (ENXIO); 145 146 sc->sc_open = 0; 147 return (0); 148 } 149 150 /*ARGSUSED*/ 151 int 152 maxrtc_read(dev_t dev, struct uio *uio, int flags) 153 { 154 struct maxrtc_softc *sc; 155 u_int8_t ch, cmdbuf[1]; 156 int a, error; 157 158 if ((sc = device_lookup(&maxrtc_cd, minor(dev))) == NULL) 159 return (ENXIO); 160 161 if (uio->uio_offset >= MAX6900_RAM_BYTES) 162 return (EINVAL); 163 164 if ((error = iic_acquire_bus(sc->sc_tag, 0)) != 0) 165 return (error); 166 167 while (uio->uio_resid && uio->uio_offset < MAX6900_RAM_BYTES) { 168 a = (int)uio->uio_offset; 169 cmdbuf[0] = MAX6900_REG_RAM(a) | MAX6900_CMD_READ; 170 if ((error = iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, 171 sc->sc_address, cmdbuf, 1, 172 &ch, 1, 0)) != 0) { 173 iic_release_bus(sc->sc_tag, 0); 174 printf("%s: maxrtc_read: read failed at 0x%x\n", 175 sc->sc_dev.dv_xname, a); 176 return (error); 177 } 178 if ((error = uiomove(&ch, 1, uio)) != 0) { 179 iic_release_bus(sc->sc_tag, 0); 180 return (error); 181 } 182 } 183 184 iic_release_bus(sc->sc_tag, 0); 185 186 return (0); 187 } 188 189 /*ARGSUSED*/ 190 int 191 maxrtc_write(dev_t dev, struct uio *uio, int flags) 192 { 193 struct maxrtc_softc *sc; 194 u_int8_t cmdbuf[2]; 195 int a, error, sverror; 196 197 if ((sc = device_lookup(&maxrtc_cd, minor(dev))) == NULL) 198 return (ENXIO); 199 200 if (uio->uio_offset >= MAX6900_RAM_BYTES) 201 return (EINVAL); 202 203 if ((error = iic_acquire_bus(sc->sc_tag, 0)) != 0) 204 return (error); 205 206 /* Start by clearing the control register's write-protect bit. */ 207 cmdbuf[0] = MAX6900_REG_CONTROL | MAX6900_CMD_WRITE; 208 cmdbuf[1] = 0; 209 210 if ((error = iic_exec(sc->sc_tag, I2C_OP_WRITE, sc->sc_address, 211 cmdbuf, 1, &cmdbuf[1], 1, 0)) != 0) { 212 iic_release_bus(sc->sc_tag, 0); 213 printf("%s: maxrtc_write: failed to clear WP bit\n", 214 sc->sc_dev.dv_xname); 215 return (error); 216 } 217 218 while (uio->uio_resid && uio->uio_offset < MAX6900_RAM_BYTES) { 219 a = (int)uio->uio_offset; 220 221 cmdbuf[0] = MAX6900_REG_RAM(a) | MAX6900_CMD_WRITE; 222 if ((error = uiomove(&cmdbuf[1], 1, uio)) != 0) 223 break; 224 225 if ((error = iic_exec(sc->sc_tag, I2C_OP_WRITE, sc->sc_address, 226 cmdbuf, 1, &cmdbuf[1], 1, 0)) != 0) { 227 printf("%s: maxrtc_write: write failed at 0x%x\n", 228 sc->sc_dev.dv_xname, a); 229 break; 230 } 231 } 232 233 /* Set the write-protect bit again. */ 234 cmdbuf[0] = MAX6900_REG_CONTROL | MAX6900_CMD_WRITE; 235 cmdbuf[1] = MAX6900_CONTROL_WP; 236 237 sverror = error; 238 if ((error = iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, 239 sc->sc_address, cmdbuf, 1, 240 &cmdbuf[1], 1, 0)) != 0) { 241 if (sverror != 0) 242 error = sverror; 243 printf("%s: maxrtc_write: failed to set WP bit\n", 244 sc->sc_dev.dv_xname); 245 } 246 247 iic_release_bus(sc->sc_tag, 0); 248 249 return (error); 250 } 251 252 static int 253 maxrtc_gettime(struct todr_chip_handle *ch, volatile struct timeval *tv) 254 { 255 struct maxrtc_softc *sc = ch->cookie; 256 struct clock_ymdhms dt; 257 258 if (maxrtc_clock_read(sc, &dt) == 0) 259 return (-1); 260 261 tv->tv_sec = clock_ymdhms_to_secs(&dt); 262 tv->tv_usec = 0; 263 264 return (0); 265 } 266 267 static int 268 maxrtc_settime(struct todr_chip_handle *ch, volatile struct timeval *tv) 269 { 270 struct maxrtc_softc *sc = ch->cookie; 271 struct clock_ymdhms dt; 272 273 clock_secs_to_ymdhms(tv->tv_sec, &dt); 274 275 if (maxrtc_clock_write(sc, &dt) == 0) 276 return (-1); 277 278 return (0); 279 } 280 281 static int 282 maxrtc_setcal(struct todr_chip_handle *ch, int cal) 283 { 284 285 return (EOPNOTSUPP); 286 } 287 288 static int 289 maxrtc_getcal(struct todr_chip_handle *ch, int *cal) 290 { 291 292 return (EOPNOTSUPP); 293 } 294 295 /* 296 * While the MAX6900 has a nice Clock Burst Read/Write command, 297 * we can't use it, since some I2C controllers do not support 298 * anything other than single-byte transfers. 299 */ 300 static int max6900_rtc_offset[] = { 301 MAX6900_REG_SECOND, 302 MAX6900_REG_MINUTE, 303 MAX6900_REG_HOUR, 304 MAX6900_REG_DATE, 305 MAX6900_REG_MONTH, 306 MAX6900_REG_DAY, 307 MAX6900_REG_YEAR, 308 MAX6900_REG_CENTURY, /* control, if burst */ 309 }; 310 311 static int 312 maxrtc_clock_read(struct maxrtc_softc *sc, struct clock_ymdhms *dt) 313 { 314 u_int8_t bcd[MAX6900_BURST_LEN], cmdbuf[1]; 315 int i; 316 317 if (iic_acquire_bus(sc->sc_tag, I2C_F_POLL)) { 318 printf("%s: maxrtc_clock_read: failed to acquire I2C bus\n", 319 sc->sc_dev.dv_xname); 320 return (0); 321 } 322 323 /* Read each timekeeping register in order. */ 324 for (i = 0; i < MAX6900_BURST_LEN; i++) { 325 cmdbuf[0] = max6900_rtc_offset[i] | MAX6900_CMD_READ; 326 327 if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, 328 sc->sc_address, cmdbuf, 1, 329 &bcd[i], 1, I2C_F_POLL)) { 330 iic_release_bus(sc->sc_tag, I2C_F_POLL); 331 printf("%s: maxrtc_clock_read: failed to read rtc " 332 "at 0x%x\n", sc->sc_dev.dv_xname, 333 max6900_rtc_offset[i]); 334 return (0); 335 } 336 } 337 338 /* Done with I2C */ 339 iic_release_bus(sc->sc_tag, I2C_F_POLL); 340 341 /* 342 * Convert the MAX6900's register values into something useable 343 */ 344 dt->dt_sec = FROMBCD(bcd[MAX6900_BURST_SECOND] & MAX6900_SECOND_MASK); 345 dt->dt_min = FROMBCD(bcd[MAX6900_BURST_MINUTE] & MAX6900_MINUTE_MASK); 346 347 if (bcd[MAX6900_BURST_HOUR] & MAX6900_HOUR_12HRS) { 348 dt->dt_hour = FROMBCD(bcd[MAX6900_BURST_HOUR] & 349 MAX6900_HOUR_12MASK); 350 if (bcd[MAX6900_BURST_HOUR] & MAX6900_HOUR_12HRS_PM) 351 dt->dt_hour += 12; 352 } else { 353 dt->dt_hour = FROMBCD(bcd[MAX6900_BURST_HOUR] & 354 MAX6900_HOUR_24MASK); 355 } 356 357 dt->dt_day = FROMBCD(bcd[MAX6900_BURST_DATE] & MAX6900_DATE_MASK); 358 dt->dt_mon = FROMBCD(bcd[MAX6900_BURST_MONTH] & MAX6900_MONTH_MASK); 359 dt->dt_year = FROMBCD(bcd[MAX6900_BURST_YEAR]); 360 /* century in the burst control slot */ 361 dt->dt_year += (int)FROMBCD(bcd[MAX6900_BURST_CONTROL]) * 100; 362 363 return (1); 364 } 365 366 static int 367 maxrtc_clock_write(struct maxrtc_softc *sc, struct clock_ymdhms *dt) 368 { 369 uint8_t bcd[MAX6900_BURST_LEN], cmdbuf[2]; 370 uint8_t init_seconds, final_seconds; 371 int i; 372 373 /* 374 * Convert our time representation into something the MAX6900 375 * can understand. 376 */ 377 bcd[MAX6900_BURST_SECOND] = TOBCD(dt->dt_sec); 378 bcd[MAX6900_BURST_MINUTE] = TOBCD(dt->dt_min); 379 bcd[MAX6900_BURST_HOUR] = TOBCD(dt->dt_hour) & MAX6900_HOUR_24MASK; 380 bcd[MAX6900_BURST_DATE] = TOBCD(dt->dt_day); 381 bcd[MAX6900_BURST_WDAY] = TOBCD(dt->dt_wday); 382 bcd[MAX6900_BURST_MONTH] = TOBCD(dt->dt_mon); 383 bcd[MAX6900_BURST_YEAR] = TOBCD(dt->dt_year % 100); 384 /* century in control slot */ 385 bcd[MAX6900_BURST_CONTROL] = TOBCD(dt->dt_year / 100); 386 387 if (iic_acquire_bus(sc->sc_tag, I2C_F_POLL)) { 388 printf("%s: maxrtc_clock_write: failed to acquire I2C bus\n", 389 sc->sc_dev.dv_xname); 390 return (0); 391 } 392 393 /* Start by clearing the control register's write-protect bit. */ 394 cmdbuf[0] = MAX6900_REG_CONTROL | MAX6900_CMD_WRITE; 395 cmdbuf[1] = 0; 396 397 if (iic_exec(sc->sc_tag, I2C_OP_WRITE, sc->sc_address, 398 cmdbuf, 1, &cmdbuf[1], 1, I2C_F_POLL)) { 399 iic_release_bus(sc->sc_tag, I2C_F_POLL); 400 printf("%s: maxrtc_clock_write: failed to clear WP bit\n", 401 sc->sc_dev.dv_xname); 402 return (0); 403 } 404 405 /* 406 * The MAX6900 RTC manual recommends ensuring "atomicity" of 407 * a non-burst write by: 408 * 409 * - writing SECONDS 410 * - reading back SECONDS, remembering it as "initial seconds" 411 * - write the remaing RTC registers 412 * - read back SECONDS as "final seconds" 413 * - if "initial seconds" == 59, ensure "final seconds" == 59 414 * - else, ensure "final seconds" is no more than one second 415 * beyond "initial seconds". 416 */ 417 again: 418 cmdbuf[0] = MAX6900_REG_SECOND | MAX6900_CMD_WRITE; 419 if (iic_exec(sc->sc_tag, I2C_OP_WRITE, sc->sc_address, 420 cmdbuf, 1, &bcd[MAX6900_BURST_SECOND], 1, I2C_F_POLL)) { 421 iic_release_bus(sc->sc_tag, I2C_F_POLL); 422 printf("%s: maxrtc_clock_write: failed to write SECONDS\n", 423 sc->sc_dev.dv_xname); 424 return (0); 425 } 426 427 cmdbuf[0] = MAX6900_REG_SECOND | MAX6900_CMD_READ; 428 if (iic_exec(sc->sc_tag, I2C_OP_READ, sc->sc_address, 429 cmdbuf, 1, &init_seconds, 1, I2C_F_POLL)) { 430 iic_release_bus(sc->sc_tag, I2C_F_POLL); 431 printf("%s: maxrtc_clock_write: failed to read " 432 "INITIAL SECONDS\n", sc->sc_dev.dv_xname); 433 return (0); 434 } 435 436 for (i = 1; i < MAX6900_BURST_LEN; i++) { 437 cmdbuf[0] = max6900_rtc_offset[i] | MAX6900_CMD_WRITE; 438 if (iic_exec(sc->sc_tag, 439 i != MAX6900_BURST_LEN - 1 ? I2C_OP_WRITE : 440 I2C_OP_WRITE_WITH_STOP, sc->sc_address, 441 cmdbuf, 1, &bcd[i], 1, I2C_F_POLL)) { 442 iic_release_bus(sc->sc_tag, I2C_F_POLL); 443 printf("%s: maxrtc_clock_write: failed to write rtc " 444 " at 0x%x\n", sc->sc_dev.dv_xname, 445 max6900_rtc_offset[i]); 446 return (0); 447 } 448 } 449 450 cmdbuf[0] = MAX6900_REG_SECOND | MAX6900_CMD_READ; 451 if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, sc->sc_address, 452 cmdbuf, 1, &final_seconds, 1, I2C_F_POLL)) { 453 iic_release_bus(sc->sc_tag, I2C_F_POLL); 454 printf("%s: maxrtc_clock_write: failed to read " 455 "FINAL SECONDS\n", sc->sc_dev.dv_xname); 456 return (0); 457 } 458 459 if ((init_seconds == 59 && final_seconds != 59) || 460 (init_seconds != 59 && final_seconds != init_seconds + 1)) { 461 #if 1 462 printf("%s: maxrtc_clock_write: init %d, final %d, try again\n", 463 sc->sc_dev.dv_xname, init_seconds, final_seconds); 464 #endif 465 goto again; 466 } 467 468 /* Finish by setting the control register's write-protect bit. */ 469 cmdbuf[0] = MAX6900_REG_CONTROL | MAX6900_CMD_WRITE; 470 cmdbuf[1] = MAX6900_CONTROL_WP; 471 472 if (iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_address, 473 cmdbuf, 1, &cmdbuf[1], 1, I2C_F_POLL)) { 474 iic_release_bus(sc->sc_tag, I2C_F_POLL); 475 printf("%s: maxrtc_clock_write: failed to set WP bit\n", 476 sc->sc_dev.dv_xname); 477 return (0); 478 } 479 480 iic_release_bus(sc->sc_tag, I2C_F_POLL); 481 482 return (1); 483 } 484