1 /* $NetBSD: g760a.c,v 1.5 2018/06/16 21:22:13 thorpej Exp $ */ 2 3 /*- 4 * Copyright (C) 2008 A.Leo. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 26 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 /* 30 * The driver for the G760A FAN Speed PWM controller. 31 */ 32 33 #include <sys/cdefs.h> 34 35 __KERNEL_RCSID(0, "$NetBSD: g760a.c,v 1.5 2018/06/16 21:22:13 thorpej Exp $"); 36 37 #include <sys/param.h> 38 #include <sys/systm.h> 39 #include <sys/device.h> 40 #include <sys/kernel.h> 41 #include <sys/conf.h> 42 #include <sys/sysctl.h> 43 44 #include <dev/sysmon/sysmonvar.h> 45 46 #include <dev/i2c/i2cvar.h> 47 #include <dev/i2c/g760areg.h> 48 49 50 struct g760a_softc { 51 device_t sc_dev; 52 struct sysmon_envsys *sc_sme; 53 54 envsys_data_t sc_sensor; 55 i2c_tag_t sc_tag; 56 int sc_addr; 57 }; 58 59 static int g760a_match(device_t, struct cfdata*, void*); 60 static void g760a_attach(device_t, device_t, void*); 61 static void g760a_setup(struct g760a_softc*); 62 static uint8_t g760a_readreg(struct g760a_softc*, uint8_t); 63 static void g760a_writereg(struct g760a_softc*, uint8_t, uint8_t); 64 65 static int g760a_reg2rpm(int); 66 67 static void g760a_refresh(struct sysmon_envsys*, envsys_data_t*); 68 static int sysctl_g760a_rpm(SYSCTLFN_PROTO); 69 70 CFATTACH_DECL_NEW(g760a, sizeof(struct g760a_softc), 71 g760a_match, g760a_attach, NULL, NULL); 72 73 static int 74 g760a_match(device_t parent, struct cfdata* cf, void* arg) 75 { 76 struct i2c_attach_args* ia = arg; 77 78 if (ia->ia_addr == G760A_ADDR) { 79 /* 80 * TODO: set up minimal speed? 81 */ 82 return I2C_MATCH_ADDRESS_ONLY; 83 } 84 85 return 0; 86 } 87 88 89 static void 90 g760a_attach(device_t parent, device_t self, void* arg) 91 { 92 struct i2c_attach_args* ia = arg; 93 struct g760a_softc* sc = device_private(self); 94 95 aprint_normal(": G760A Fan Controller\n"); 96 97 sc->sc_dev = self; 98 sc->sc_tag = ia->ia_tag; 99 sc->sc_addr = ia->ia_addr; 100 101 g760a_setup(sc); 102 } 103 104 105 static int 106 g760a_reg2rpm(int n) 107 { 108 if(n == 255) 109 return 0; 110 111 if(n == 0) 112 return 255; 113 114 return G760A_N2RPM(n); 115 } 116 117 118 static uint8_t 119 g760a_readreg(struct g760a_softc* sc, uint8_t reg) 120 { 121 uint8_t data; 122 123 if (iic_acquire_bus(sc->sc_tag, 0)) { 124 aprint_error_dev(sc->sc_dev, "unable to acquire the iic bus\n"); 125 return 0; 126 } 127 128 iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, sc->sc_addr, ®, 1, 129 &data, 1, 0); 130 iic_release_bus(sc->sc_tag, 0); 131 132 return data; 133 } 134 135 136 static void 137 g760a_writereg(struct g760a_softc* sc, uint8_t reg, uint8_t data) 138 { 139 140 if (iic_acquire_bus(sc->sc_tag, 0)) { 141 aprint_error_dev(sc->sc_dev, "unable to acquire the iic bus\n"); 142 return; 143 } 144 145 iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_addr, ®, 1, 146 &data, 1, 0); 147 iic_release_bus(sc->sc_tag, 0); 148 } 149 150 151 SYSCTL_SETUP(sysctl_g760a_setup, "sysctl g760a subtree setup") 152 { 153 154 sysctl_createv(NULL, 0, NULL, NULL, 155 CTLFLAG_PERMANENT, 156 CTLTYPE_NODE, "machdep", NULL, 157 NULL, 0, NULL, 0, 158 CTL_MACHDEP, CTL_EOL); 159 } 160 161 162 /*ARGUSED*/ 163 static int 164 sysctl_g760a_rpm(SYSCTLFN_ARGS) 165 { 166 int error, t; 167 struct sysctlnode node; 168 struct g760a_softc* sc; 169 170 node = *rnode; 171 sc = node.sysctl_data; 172 173 t = g760a_readreg(sc, G760A_REG_SET_CNT); 174 t = g760a_reg2rpm(t); 175 176 node.sysctl_data = &t; 177 178 error = sysctl_lookup(SYSCTLFN_CALL(&node)); 179 180 if (error || newp == NULL) 181 return error; 182 183 if (t > 20000 || t < G760A_N2RPM(254)) 184 return EINVAL; 185 186 t = g760a_reg2rpm(t); 187 188 g760a_writereg(sc, G760A_REG_SET_CNT, t); 189 190 return 0; 191 } 192 193 194 static void 195 g760a_refresh(struct sysmon_envsys* sme, envsys_data_t* edata) 196 { 197 struct g760a_softc* sc = sme->sme_cookie; 198 199 switch (edata->units) { 200 case ENVSYS_SFANRPM: 201 { 202 uint8_t n; 203 204 n = g760a_readreg(sc, G760A_REG_ACT_CNT); 205 edata->value_cur = g760a_reg2rpm(n); 206 } 207 break; 208 default: 209 aprint_error_dev(sc->sc_dev, "oops\n"); 210 } 211 212 edata->state = ENVSYS_SVALID; 213 } 214 215 216 static void 217 g760a_setup(struct g760a_softc* sc) 218 { 219 int error; 220 int ret; 221 const struct sysctlnode *me, *node; 222 223 sc->sc_sme = sysmon_envsys_create(); 224 225 ret = sysctl_createv(NULL, 0, NULL, &me, 226 CTLFLAG_READWRITE, 227 CTLTYPE_NODE, device_xname(sc->sc_dev), NULL, 228 NULL, 0, NULL, 0, 229 CTL_MACHDEP, CTL_CREATE, CTL_EOL); 230 231 (void)strlcpy(sc->sc_sensor.desc, "sysfan rpm", 232 sizeof(sc->sc_sensor.desc)); 233 sc->sc_sensor.units = ENVSYS_SFANRPM; 234 sc->sc_sensor.state = ENVSYS_SINVALID; 235 236 if (sysmon_envsys_sensor_attach(sc->sc_sme, &sc->sc_sensor)) 237 goto out; 238 239 ret = sysctl_createv(NULL, 0, NULL, &node, 240 CTLFLAG_READWRITE, 241 CTLTYPE_INT, "rpm", sc->sc_sensor.desc, 242 sysctl_g760a_rpm, 0x42, (void*)sc, 0, 243 CTL_MACHDEP, me->sysctl_num, CTL_CREATE, CTL_EOL); 244 245 sc->sc_sme->sme_name = device_xname(sc->sc_dev); 246 sc->sc_sme->sme_cookie = sc; 247 sc->sc_sme->sme_refresh = g760a_refresh; 248 249 error = sysmon_envsys_register(sc->sc_sme); 250 251 if (error) { 252 aprint_error_dev(sc->sc_dev, 253 "unable to register with sysmon. errorcode %i\n", error); 254 goto out; 255 } 256 257 return; 258 out: 259 sysmon_envsys_destroy(sc->sc_sme); 260 } 261