1 /* $NetBSD: adadc.c,v 1.6 2018/06/26 06:03:57 thorpej Exp $ */ 2 3 /*- 4 * Copyright (c) 2018 Michael Lorenz 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 17 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 18 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 19 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 20 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 21 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 22 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 23 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 24 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 26 * POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 /* 30 * a driver for Analog Devices AD7417 temperature sensors / ADCs 31 * very much macppc only for now since we need calibaration data to make sense 32 * of the ADC inputs 33 * info on how to get these from FreeBSD and Linux 34 */ 35 36 #include <sys/cdefs.h> 37 __KERNEL_RCSID(0, "$NetBSD: adadc.c,v 1.6 2018/06/26 06:03:57 thorpej Exp $"); 38 39 #include <sys/param.h> 40 #include <sys/systm.h> 41 #include <sys/device.h> 42 #include <sys/conf.h> 43 #include <sys/bus.h> 44 45 #include <dev/i2c/i2cvar.h> 46 47 #include <dev/sysmon/sysmonvar.h> 48 49 #include <dev/ofw/openfirm.h> 50 51 /* commands */ 52 #define ADADC_TEMP 0x00 /* temperature, 16bit */ 53 #define ADADC_CONFIG 0x01 /* 8bit */ 54 #define ADADC_THYST 0x02 /* 16bit */ 55 #define ADADC_TOTI 0x03 /* 16bit, temperature threshold */ 56 #define ADADC_ADC 0x04 /* 16bit, ADC value */ 57 #define ADADC_CONFIG2 0x05 /* 8bit */ 58 59 /* 60 * registers 61 * ADADC_TEMP has signed temperature in C in first byte, left aligned fraction 62 * in 2nd byte. 63 */ 64 65 #define ADADC_CFG_CHANNEL_0 0x00 66 #define ADADC_CFG_CHANNEL_1 0x20 67 #define ADADC_CFG_CHANNEL_2 0x40 68 #define ADADC_CFG_CHANNEL_3 0x60 69 #define ADADC_CFG_CHANNEL_4 0x80 70 #define ADADC_CFG_CHANNEL_MASK 0xe0 71 #define ADADC_CFG_FAULT_MASK 0x18 72 #define ADADC_CFG_OTI_POL 0x04 /* overtemp output polarity */ 73 #define ADADC_CFG_INTMODE 0x02 /* interrupt mode */ 74 #define ADADC_CFG_SHUTDOWN 0x01 /* shutdown mode */ 75 76 77 struct adadc_softc { 78 device_t sc_dev; 79 i2c_tag_t sc_i2c; 80 i2c_addr_t sc_addr; 81 82 struct sysmon_envsys *sc_sme; 83 envsys_data_t sc_sensors[5]; 84 int sc_nsensors; 85 int sc_diode_offset, sc_diode_slope; 86 }; 87 88 static int adadc_match(device_t, cfdata_t, void *); 89 static void adadc_attach(device_t, device_t, void *); 90 91 static void adadc_sensors_refresh(struct sysmon_envsys *, envsys_data_t *); 92 93 CFATTACH_DECL_NEW(adadc, sizeof(struct adadc_softc), 94 adadc_match, adadc_attach, NULL, NULL); 95 96 static const struct device_compatible_entry compat_data[] = { 97 { "ad7417", 0 }, 98 { NULL, 0 } 99 }; 100 101 /* calibaration table from Darwin via Linux */ 102 static int slope[5] = {0, 0, 0x0320, 0x00a0, 0x1f40}; 103 104 static int 105 adadc_match(device_t parent, cfdata_t match, void *aux) 106 { 107 struct i2c_attach_args *ia = aux; 108 int match_result; 109 110 if (iic_use_direct_match(ia, match, compat_data, &match_result)) 111 return match_result; 112 113 /* 114 * XXX 115 * this driver is pretty much useless without OF, should 116 * probably remove this 117 */ 118 if ((ia->ia_addr & 0x2b) == 0x2b) 119 return I2C_MATCH_ADDRESS_ONLY; 120 121 return 0; 122 } 123 124 static void 125 adadc_attach(device_t parent, device_t self, void *aux) 126 { 127 struct adadc_softc *sc = device_private(self); 128 struct i2c_attach_args *ia = aux; 129 envsys_data_t *s; 130 int error, ch; 131 uint32_t eeprom[40]; 132 char loc[256]; 133 int which_cpu; 134 135 sc->sc_dev = self; 136 sc->sc_i2c = ia->ia_tag; 137 sc->sc_addr = ia->ia_addr; 138 139 aprint_naive("\n"); 140 aprint_normal(": AD7417\n"); 141 142 sc->sc_sme = sysmon_envsys_create(); 143 sc->sc_sme->sme_name = device_xname(self); 144 sc->sc_sme->sme_cookie = sc; 145 sc->sc_sme->sme_refresh = adadc_sensors_refresh; 146 sc->sc_nsensors = 0; 147 148 /* 149 * XXX 150 * without OpenFirmware telling us how to interpret the ADC inputs we 151 * should probably just expose the temperature and four ENVSYS_INTEGERs 152 */ 153 which_cpu = 0; 154 ch = OF_child(ia->ia_cookie); 155 while (ch != 0) { 156 if (OF_getprop(ch, "location", loc, 32) > 0) { 157 int reg = 0; 158 OF_getprop(ch, "reg", ®, sizeof(reg)); 159 s = &sc->sc_sensors[sc->sc_nsensors]; 160 /* 161 * this setup matches my 2x 2.5GHz PCI-X G5, Linux and 162 * FreeBSD hardcode these as well so we should be safe 163 */ 164 switch (reg) { 165 case 0: 166 if (strstr(loc, "CPU B") != NULL) 167 which_cpu = 1; 168 /* FALLTHROUGH */ 169 case 1: 170 s->units = ENVSYS_STEMP; 171 break; 172 case 2: 173 case 4: 174 s->units = ENVSYS_SAMPS; 175 break; 176 case 3: 177 s->units = ENVSYS_SVOLTS_DC; 178 break; 179 default: 180 s->units = ENVSYS_INTEGER; 181 } 182 strncpy(s->desc, loc, sizeof(s->desc)); 183 s->private = reg; 184 sysmon_envsys_sensor_attach(sc->sc_sme, s); 185 sc->sc_nsensors++; 186 } 187 ch = OF_peer(ch); 188 } 189 aprint_debug_dev(self, "monitoring CPU %d\n", which_cpu); 190 error = get_cpuid(which_cpu, (uint8_t *)eeprom); 191 if (error >= 0) { 192 sc->sc_diode_slope = eeprom[0x11] >> 16; 193 sc->sc_diode_offset = (int16_t)(eeprom[0x11] & 0xffff) << 12; 194 } 195 sysmon_envsys_register(sc->sc_sme); 196 } 197 198 static void 199 adadc_sensors_refresh(struct sysmon_envsys *sme, envsys_data_t *edata) 200 { 201 struct adadc_softc *sc = sme->sme_cookie; 202 uint8_t cmd = ADADC_CONFIG; 203 int16_t data = 0; 204 uint16_t rdata; 205 uint8_t cfg; 206 int error, ch; 207 208 209 iic_acquire_bus(sc->sc_i2c, 0); 210 if (edata->private > 0) { 211 error = iic_exec(sc->sc_i2c, I2C_OP_READ_WITH_STOP, 212 sc->sc_addr, &cmd, 1, &cfg, 1, 0); 213 ch = cfg >> 5; 214 /* are we on the right channel already? */ 215 if (ch != edata->private) { 216 /* nope */ 217 cfg &= 0x1f; 218 cfg |= (edata->private & 7) << 5; 219 iic_exec(sc->sc_i2c, I2C_OP_WRITE_WITH_STOP, 220 sc->sc_addr, &cmd, 1, &cfg, 1, 0); 221 } 222 cmd = ADADC_ADC; 223 /* now read the ADC register */ 224 error = iic_exec(sc->sc_i2c, I2C_OP_READ_WITH_STOP, 225 sc->sc_addr, &cmd, 1, &rdata, 2, 0); 226 rdata = be16toh(rdata) >> 6; 227 if (edata->private == 1) { 228 int temp; 229 temp = (rdata * sc->sc_diode_slope + 230 sc->sc_diode_offset) >> 2; 231 /* 16.16 fixed point */ 232 edata->value_cur = (temp >> 12) * 62500 + 273150000; 233 } else { 234 /* 235 * the input is 10bit, so converting to 8.4 fixed point 236 * is more than enough 237 */ 238 int temp = rdata * slope[edata->private]; 239 edata->value_cur = (temp >> 12) * 62500; 240 } 241 } else { 242 cmd = ADADC_TEMP; 243 /* just read the temperature register */ 244 error = iic_exec(sc->sc_i2c, I2C_OP_READ_WITH_STOP, 245 sc->sc_addr, &cmd, 1, &data, 2, 0); 246 /* 8.2 bit fixed point Celsius -> microkelvin */ 247 edata->value_cur = ((data >> 6) * 250000) + 273150000; 248 } 249 iic_release_bus(sc->sc_i2c, 0); 250 251 if (error) { 252 edata->state = ENVSYS_SINVALID; 253 } else { 254 edata->state = ENVSYS_SVALID; 255 } 256 } 257