1 /* $NetBSD: mlx_eisa.c,v 1.19 2007/10/19 11:59:42 ad Exp $ */ 2 3 /*- 4 * Copyright (c) 2001 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Andrew Doran. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. All advertising materials mentioning features or use of this software 19 * must display the following acknowledgement: 20 * This product includes software developed by the NetBSD 21 * Foundation, Inc. and its contributors. 22 * 4. Neither the name of The NetBSD Foundation nor the names of its 23 * contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 27 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 28 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 30 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 31 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 34 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 36 * POSSIBILITY OF SUCH DAMAGE. 37 */ 38 39 /* 40 * EISA front-end for mlx(4) driver. 41 */ 42 43 #include <sys/cdefs.h> 44 __KERNEL_RCSID(0, "$NetBSD: mlx_eisa.c,v 1.19 2007/10/19 11:59:42 ad Exp $"); 45 46 #include <sys/param.h> 47 #include <sys/systm.h> 48 #include <sys/device.h> 49 50 #include <sys/bus.h> 51 #include <sys/intr.h> 52 53 #include <dev/eisa/eisavar.h> 54 #include <dev/eisa/eisadevs.h> 55 56 #include <dev/ic/mlxreg.h> 57 #include <dev/ic/mlxio.h> 58 #include <dev/ic/mlxvar.h> 59 60 #define MLX_EISA_SLOT_OFFSET 0x0c80 61 #define MLX_EISA_IOSIZE (0x0ce0 - MLX_EISA_SLOT_OFFSET) 62 #define MLX_EISA_CFG01 (0x0cc0 - MLX_EISA_SLOT_OFFSET) 63 #define MLX_EISA_CFG02 (0x0cc1 - MLX_EISA_SLOT_OFFSET) 64 #define MLX_EISA_CFG03 (0x0cc3 - MLX_EISA_SLOT_OFFSET) 65 #define MLX_EISA_CFG04 (0x0c8d - MLX_EISA_SLOT_OFFSET) 66 #define MLX_EISA_CFG05 (0x0c90 - MLX_EISA_SLOT_OFFSET) 67 #define MLX_EISA_CFG06 (0x0c91 - MLX_EISA_SLOT_OFFSET) 68 #define MLX_EISA_CFG07 (0x0c92 - MLX_EISA_SLOT_OFFSET) 69 #define MLX_EISA_CFG08 (0x0c93 - MLX_EISA_SLOT_OFFSET) 70 #define MLX_EISA_CFG09 (0x0c94 - MLX_EISA_SLOT_OFFSET) 71 #define MLX_EISA_CFG10 (0x0c95 - MLX_EISA_SLOT_OFFSET) 72 73 static void mlx_eisa_attach(struct device *, struct device *, void *); 74 static int mlx_eisa_match(struct device *, struct cfdata *, void *); 75 76 static int mlx_v1_submit(struct mlx_softc *, struct mlx_ccb *); 77 static int mlx_v1_findcomplete(struct mlx_softc *, u_int *, u_int *); 78 static void mlx_v1_intaction(struct mlx_softc *, int); 79 static int mlx_v1_fw_handshake(struct mlx_softc *, int *, int *, int *); 80 #ifdef MLX_RESET 81 static int mlx_v1_reset(struct mlx_softc *); 82 #endif 83 84 CFATTACH_DECL(mlx_eisa, sizeof(struct mlx_softc), 85 mlx_eisa_match, mlx_eisa_attach, NULL, NULL); 86 87 static struct mlx_eisa_prod { 88 const char *mp_idstr; 89 int mp_nchan; 90 } const mlx_eisa_prod[] = { 91 { "MLX0070", 1 }, 92 { "MLX0071", 3 }, 93 { "MLX0072", 3 }, 94 { "MLX0073", 2 }, 95 { "MLX0074", 1 }, 96 { "MLX0075", 3 }, 97 { "MLX0076", 2 }, 98 { "MLX0077", 1 }, 99 }; 100 101 static int 102 mlx_eisa_match(struct device *parent, struct cfdata *match, 103 void *aux) 104 { 105 struct eisa_attach_args *ea; 106 int i; 107 108 ea = aux; 109 110 for (i = 0; i < sizeof(mlx_eisa_prod) / sizeof(mlx_eisa_prod[0]); i++) 111 if (strcmp(ea->ea_idstring, mlx_eisa_prod[i].mp_idstr) == 0) 112 return (1); 113 114 return (0); 115 } 116 117 static void 118 mlx_eisa_attach(struct device *parent, struct device *self, void *aux) 119 { 120 struct eisa_attach_args *ea; 121 bus_space_handle_t ioh; 122 eisa_chipset_tag_t ec; 123 eisa_intr_handle_t ih; 124 struct mlx_softc *mlx; 125 bus_space_tag_t iot; 126 const char *intrstr; 127 int irq, i, icfg; 128 129 ea = aux; 130 mlx = device_private(self); 131 iot = ea->ea_iot; 132 ec = ea->ea_ec; 133 134 if (bus_space_map(iot, EISA_SLOT_ADDR(ea->ea_slot) + 135 MLX_EISA_SLOT_OFFSET, MLX_EISA_IOSIZE, 0, &ioh)) { 136 printf("can't map i/o space\n"); 137 return; 138 } 139 140 mlx->mlx_iot = iot; 141 mlx->mlx_ioh = ioh; 142 mlx->mlx_dmat = ea->ea_dmat; 143 144 /* 145 * Map and establish the interrupt. 146 */ 147 icfg = bus_space_read_1(iot, ioh, MLX_EISA_CFG03); 148 149 switch (icfg & 0xf0) { 150 case 0xa0: 151 irq = 11; 152 break; 153 case 0xc0: 154 irq = 12; 155 break; 156 case 0xe0: 157 irq = 14; 158 break; 159 case 0x80: 160 irq = 15; 161 break; 162 default: 163 printf("controller on invalid IRQ\n"); 164 return; 165 } 166 167 if (eisa_intr_map(ec, irq, &ih)) { 168 printf("can't map interrupt (%d)\n", irq); 169 return; 170 } 171 172 intrstr = eisa_intr_string(ec, ih); 173 mlx->mlx_ih = eisa_intr_establish(ec, ih, 174 ((icfg & 0x08) != 0 ? IST_LEVEL : IST_EDGE), 175 IPL_BIO, mlx_intr, mlx); 176 if (mlx->mlx_ih == NULL) { 177 printf("can't establish interrupt"); 178 if (intrstr != NULL) 179 printf(" at %s", intrstr); 180 printf("\n"); 181 return; 182 } 183 184 for (i = 0; i < sizeof(mlx_eisa_prod) / sizeof(mlx_eisa_prod[0]); i++) 185 if (strcmp(ea->ea_idstring, mlx_eisa_prod[i].mp_idstr) == 0) { 186 mlx->mlx_ci.ci_nchan = mlx_eisa_prod[i].mp_nchan; 187 break; 188 } 189 mlx->mlx_ci.ci_iftype = 1; 190 191 mlx->mlx_submit = mlx_v1_submit; 192 mlx->mlx_findcomplete = mlx_v1_findcomplete; 193 mlx->mlx_intaction = mlx_v1_intaction; 194 mlx->mlx_fw_handshake = mlx_v1_fw_handshake; 195 #ifdef MLX_RESET 196 mlx->mlx_reset = mlx_v1_reset; 197 #endif 198 199 printf(": Mylex RAID\n"); 200 mlx_init(mlx, intrstr); 201 } 202 203 /* 204 * ================= V1 interface linkage ================= 205 */ 206 207 /* 208 * Try to give (mc) to the controller. Returns 1 if successful, 0 on 209 * failure (the controller is not ready to take a command). 210 * 211 * Must be called at splbio or in a fashion that prevents reentry. 212 */ 213 static int 214 mlx_v1_submit(struct mlx_softc *mlx, struct mlx_ccb *mc) 215 { 216 217 /* Ready for our command? */ 218 if ((mlx_inb(mlx, MLX_V1REG_IDB) & MLX_V1_IDB_FULL) == 0) { 219 /* Copy mailbox data to window. */ 220 bus_space_write_region_1(mlx->mlx_iot, mlx->mlx_ioh, 221 MLX_V1REG_MAILBOX, mc->mc_mbox, 13); 222 bus_space_barrier(mlx->mlx_iot, mlx->mlx_ioh, 223 MLX_V1REG_MAILBOX, 13, 224 BUS_SPACE_BARRIER_WRITE); 225 226 /* Post command. */ 227 mlx_outb(mlx, MLX_V1REG_IDB, MLX_V1_IDB_FULL); 228 return (1); 229 } 230 231 return (0); 232 } 233 234 /* 235 * See if a command has been completed, if so acknowledge its completion and 236 * recover the slot number and status code. 237 * 238 * Must be called at splbio or in a fashion that prevents reentry. 239 */ 240 static int 241 mlx_v1_findcomplete(struct mlx_softc *mlx, u_int *slot, u_int *status) 242 { 243 244 /* Status available? */ 245 if ((mlx_inb(mlx, MLX_V1REG_ODB) & MLX_V1_ODB_SAVAIL) != 0) { 246 *slot = mlx_inb(mlx, MLX_V1REG_MAILBOX + 0x0d); 247 *status = mlx_inw(mlx, MLX_V1REG_MAILBOX + 0x0e); 248 249 /* Acknowledge completion. */ 250 mlx_outb(mlx, MLX_V1REG_ODB, MLX_V1_ODB_SAVAIL); 251 mlx_outb(mlx, MLX_V1REG_IDB, MLX_V1_IDB_SACK); 252 return (1); 253 } 254 255 return (0); 256 } 257 258 /* 259 * Enable/disable interrupts as requested. (No acknowledge required) 260 * 261 * Must be called at splbio or in a fashion that prevents reentry. 262 */ 263 static void 264 mlx_v1_intaction(struct mlx_softc *mlx, int action) 265 { 266 267 mlx_outb(mlx, MLX_V1REG_IE, action ? 1 : 0); 268 } 269 270 /* 271 * Poll for firmware error codes during controller initialisation. 272 * 273 * Returns 0 if initialisation is complete, 1 if still in progress but no 274 * error has been fetched, 2 if an error has been retrieved. 275 */ 276 static int 277 mlx_v1_fw_handshake(struct mlx_softc *mlx, int *error, int *param1, int *param2) 278 { 279 u_int8_t fwerror; 280 281 /* 282 * First time around, enable the IDB interrupt and clear any 283 * hardware completion status. 284 */ 285 if ((mlx->mlx_flags & MLXF_FW_INITTED) == 0) { 286 mlx_outb(mlx, MLX_V1REG_ODB_EN, 1); 287 DELAY(1000); 288 mlx_outb(mlx, MLX_V1REG_ODB, 1); 289 DELAY(1000); 290 mlx_outb(mlx, MLX_V1REG_IDB, MLX_V1_IDB_SACK); 291 DELAY(1000); 292 mlx->mlx_flags |= MLXF_FW_INITTED; 293 } 294 295 /* Init in progress? */ 296 if ((mlx_inb(mlx, MLX_V1REG_IDB) & MLX_V1_IDB_INIT_BUSY) == 0) 297 return (0); 298 299 /* Test error value. */ 300 fwerror = mlx_inb(mlx, MLX_V1REG_ODB); 301 302 if ((fwerror & MLX_V1_FWERROR_PEND) == 0) 303 return (1); 304 305 /* XXX Fetch status. */ 306 *error = fwerror & 0xf0; 307 *param1 = -1; 308 *param2 = -1; 309 310 /* Acknowledge. */ 311 mlx_outb(mlx, MLX_V1REG_ODB, fwerror); 312 313 return (2); 314 } 315 316 #ifdef MLX_RESET 317 /* 318 * Reset the controller. Return non-zero on failure. 319 */ 320 static int 321 mlx_v1_reset(struct mlx_softc *mlx) 322 { 323 int i; 324 325 mlx_outb(mlx, MLX_V1REG_IDB, MLX_V1_IDB_SACK); 326 delay(1000000); 327 328 /* Wait up to 2 minutes for the bit to clear. */ 329 for (i = 120; i != 0; i--) { 330 delay(1000000); 331 if ((mlx_inb(mlx, MLX_V1REG_IDB) & MLX_V1_IDB_SACK) == 0) 332 break; 333 } 334 if (i == 0) 335 return (-1); 336 337 mlx_outb(mlx, MLX_V1REG_ODB, MLX_V1_ODB_RESET); 338 mlx_outb(mlx, MLX_V1REG_IDB, MLX_V1_IDB_RESET); 339 340 /* Wait up to 5 seconds for the bit to clear... */ 341 for (i = 5; i != 0; i--) { 342 delay(1000000); 343 if ((mlx_inb(mlx, MLX_V1REG_IDB) & MLX_V1_IDB_RESET) == 0) 344 break; 345 } 346 if (i == 0) 347 return (-1); 348 349 /* Wait up to 3 seconds for the other bit to clear... */ 350 for (i = 5; i != 0; i--) { 351 delay(1000000); 352 if ((mlx_inb(mlx, MLX_V1REG_ODB) & MLX_V1_ODB_RESET) == 0) 353 break; 354 } 355 if (i == 0) 356 return (-1); 357 358 return (0); 359 } 360 #endif /* MLX_RESET */ 361