1 /* $NetBSD: dz.c,v 1.39 2010/05/09 22:29:26 hans Exp $ */ 2 /* 3 * Copyright (c) 1992, 1993 4 * The Regents of the University of California. All rights reserved. 5 * 6 * This code is derived from software contributed to Berkeley by 7 * Ralph Campbell and Rick Macklem. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. Neither the name of the University nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 */ 33 34 /* 35 * Copyright (c) 1996 Ken C. Wellsch. All rights reserved. 36 * 37 * This code is derived from software contributed to Berkeley by 38 * Ralph Campbell and Rick Macklem. 39 * 40 * Redistribution and use in source and binary forms, with or without 41 * modification, are permitted provided that the following conditions 42 * are met: 43 * 1. Redistributions of source code must retain the above copyright 44 * notice, this list of conditions and the following disclaimer. 45 * 2. Redistributions in binary form must reproduce the above copyright 46 * notice, this list of conditions and the following disclaimer in the 47 * documentation and/or other materials provided with the distribution. 48 * 3. All advertising materials mentioning features or use of this software 49 * must display the following acknowledgement: 50 * This product includes software developed by the University of 51 * California, Berkeley and its contributors. 52 * 4. Neither the name of the University nor the names of its contributors 53 * may be used to endorse or promote products derived from this software 54 * without specific prior written permission. 55 * 56 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 57 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 58 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 59 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 60 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 61 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 62 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 63 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 64 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 65 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 66 * SUCH DAMAGE. 67 */ 68 69 #include <sys/cdefs.h> 70 __KERNEL_RCSID(0, "$NetBSD: dz.c,v 1.39 2010/05/09 22:29:26 hans Exp $"); 71 72 #include <sys/param.h> 73 #include <sys/systm.h> 74 #include <sys/callout.h> 75 #include <sys/ioctl.h> 76 #include <sys/tty.h> 77 #include <sys/proc.h> 78 #include <sys/buf.h> 79 #include <sys/conf.h> 80 #include <sys/file.h> 81 #include <sys/uio.h> 82 #include <sys/kernel.h> 83 #include <sys/syslog.h> 84 #include <sys/device.h> 85 #include <sys/kauth.h> 86 87 #include <sys/bus.h> 88 89 #include <dev/dec/dzreg.h> 90 #include <dev/dec/dzvar.h> 91 92 #include <dev/cons.h> 93 94 #ifdef __mips__ 95 #define DZ_DELAY(x) DELAY(x) 96 #define control __noinline 97 #else /* presumably vax */ 98 #define DZ_DELAY(x) /* nothing */ 99 #define control inline 100 #endif 101 102 static control uint 103 dz_read1(struct dz_softc *sc, u_int off) 104 { 105 u_int rv; 106 107 rv = bus_space_read_1(sc->sc_iot, sc->sc_ioh, off); 108 DZ_DELAY(1); 109 return rv; 110 } 111 112 static control u_int 113 dz_read2(struct dz_softc *sc, u_int off) 114 { 115 u_int rv; 116 117 rv = bus_space_read_2(sc->sc_iot, sc->sc_ioh, off); 118 DZ_DELAY(1); 119 return rv; 120 } 121 122 static control void 123 dz_write1(struct dz_softc *sc, u_int off, u_int val) 124 { 125 126 bus_space_write_1(sc->sc_iot, sc->sc_ioh, off, val); 127 bus_space_barrier(sc->sc_iot, sc->sc_ioh, sc->sc_dr.dr_firstreg, 128 sc->sc_dr.dr_winsize, BUS_SPACE_BARRIER_WRITE | 129 BUS_SPACE_BARRIER_READ); 130 DZ_DELAY(10); 131 } 132 133 static control void 134 dz_write2(struct dz_softc *sc, u_int off, u_int val) 135 { 136 137 bus_space_write_2(sc->sc_iot, sc->sc_ioh, off, val); 138 bus_space_barrier(sc->sc_iot, sc->sc_ioh, sc->sc_dr.dr_firstreg, 139 sc->sc_dr.dr_winsize, BUS_SPACE_BARRIER_WRITE | 140 BUS_SPACE_BARRIER_READ); 141 DZ_DELAY(10); 142 } 143 144 #include "ioconf.h" 145 146 /* Flags used to monitor modem bits, make them understood outside driver */ 147 148 #define DML_DTR TIOCM_DTR 149 #define DML_DCD TIOCM_CD 150 #define DML_RI TIOCM_RI 151 #define DML_BRK 0100000 /* no equivalent, we will mask */ 152 153 static const struct speedtab dzspeedtab[] = 154 { 155 { 0, 0 }, 156 { 50, DZ_LPR_B50 }, 157 { 75, DZ_LPR_B75 }, 158 { 110, DZ_LPR_B110 }, 159 { 134, DZ_LPR_B134 }, 160 { 150, DZ_LPR_B150 }, 161 { 300, DZ_LPR_B300 }, 162 { 600, DZ_LPR_B600 }, 163 { 1200, DZ_LPR_B1200 }, 164 { 1800, DZ_LPR_B1800 }, 165 { 2000, DZ_LPR_B2000 }, 166 { 2400, DZ_LPR_B2400 }, 167 { 3600, DZ_LPR_B3600 }, 168 { 4800, DZ_LPR_B4800 }, 169 { 7200, DZ_LPR_B7200 }, 170 { 9600, DZ_LPR_B9600 }, 171 { 19200, DZ_LPR_B19200 }, 172 { -1, -1 } 173 }; 174 175 static void dzstart(struct tty *); 176 static int dzparam(struct tty *, struct termios *); 177 static unsigned dzmctl(struct dz_softc *, int, int, int); 178 static void dzscan(void *); 179 180 static dev_type_open(dzopen); 181 static dev_type_close(dzclose); 182 static dev_type_read(dzread); 183 static dev_type_write(dzwrite); 184 static dev_type_ioctl(dzioctl); 185 static dev_type_stop(dzstop); 186 static dev_type_tty(dztty); 187 static dev_type_poll(dzpoll); 188 189 const struct cdevsw dz_cdevsw = { 190 dzopen, dzclose, dzread, dzwrite, dzioctl, 191 dzstop, dztty, dzpoll, nommap, ttykqfilter, D_TTY 192 }; 193 194 /* 195 * The DZ series doesn't interrupt on carrier transitions, 196 * so we have to use a timer to watch it. 197 */ 198 int dz_timer; /* true if timer started */ 199 struct callout dzscan_ch; 200 static struct cnm_state dz_cnm_state; 201 202 void 203 dzattach(struct dz_softc *sc, struct evcnt *parent_evcnt, int consline) 204 { 205 int n; 206 207 /* Initialize our softc structure. */ 208 209 for (n = 0; n < sc->sc_type; n++) { 210 sc->sc_dz[n].dz_sc = sc; 211 sc->sc_dz[n].dz_line = n; 212 sc->sc_dz[n].dz_tty = ttymalloc(); 213 } 214 215 evcnt_attach_dynamic(&sc->sc_rintrcnt, EVCNT_TYPE_INTR, parent_evcnt, 216 device_xname(sc->sc_dev), "rintr"); 217 evcnt_attach_dynamic(&sc->sc_tintrcnt, EVCNT_TYPE_INTR, parent_evcnt, 218 device_xname(sc->sc_dev), "tintr"); 219 220 /* Console magic keys */ 221 cn_init_magic(&dz_cnm_state); 222 cn_set_magic("\047\001"); /* default magic is BREAK */ 223 /* VAX will change it in MD code */ 224 225 sc->sc_rxint = sc->sc_brk = 0; 226 sc->sc_consline = consline; 227 228 sc->sc_dr.dr_tcrw = sc->sc_dr.dr_tcr; 229 dz_write2(sc, sc->sc_dr.dr_csr, DZ_CSR_MSE | DZ_CSR_RXIE | DZ_CSR_TXIE); 230 dz_write1(sc, sc->sc_dr.dr_dtr, 0); 231 dz_write1(sc, sc->sc_dr.dr_break, 0); 232 DELAY(10000); 233 234 /* Alas no interrupt on modem bit changes, so we manually scan */ 235 if (dz_timer == 0) { 236 dz_timer = 1; 237 callout_init(&dzscan_ch, 0); 238 callout_reset(&dzscan_ch, hz, dzscan, NULL); 239 } 240 printf("\n"); 241 } 242 243 /* Receiver Interrupt */ 244 245 void 246 dzrint(void *arg) 247 { 248 struct dz_softc *sc = arg; 249 struct tty *tp; 250 int cc, mcc, line; 251 unsigned c; 252 int overrun = 0; 253 254 sc->sc_rxint++; 255 256 while ((c = dz_read2(sc, sc->sc_dr.dr_rbuf)) & DZ_RBUF_DATA_VALID) { 257 cc = c & 0xFF; 258 line = DZ_PORT(c>>8); 259 tp = sc->sc_dz[line].dz_tty; 260 261 /* Must be caught early */ 262 if (sc->sc_dz[line].dz_catch && 263 (*sc->sc_dz[line].dz_catch)(sc->sc_dz[line].dz_private, cc)) 264 continue; 265 266 if ((c & (DZ_RBUF_FRAMING_ERR | 0xff)) == DZ_RBUF_FRAMING_ERR) 267 mcc = CNC_BREAK; 268 else 269 mcc = cc; 270 271 cn_check_magic(tp->t_dev, mcc, dz_cnm_state); 272 273 if (!(tp->t_state & TS_ISOPEN)) { 274 cv_broadcast(&tp->t_rawcv); 275 continue; 276 } 277 278 if ((c & DZ_RBUF_OVERRUN_ERR) && overrun == 0) { 279 log(LOG_WARNING, "%s: silo overflow, line %d\n", 280 device_xname(sc->sc_dev), line); 281 overrun = 1; 282 } 283 284 if (c & DZ_RBUF_FRAMING_ERR) 285 cc |= TTY_FE; 286 if (c & DZ_RBUF_PARITY_ERR) 287 cc |= TTY_PE; 288 289 (*tp->t_linesw->l_rint)(cc, tp); 290 } 291 } 292 293 /* Transmitter Interrupt */ 294 295 void 296 dzxint(void *arg) 297 { 298 struct dz_softc *sc = arg; 299 struct tty *tp; 300 struct clist *cl; 301 int line, ch, csr; 302 u_char tcr; 303 304 /* 305 * Switch to POLLED mode. 306 * Some simple measurements indicated that even on 307 * one port, by freeing the scanner in the controller 308 * by either providing a character or turning off 309 * the port when output is complete, the transmitter 310 * was ready to accept more output when polled again. 311 * With just two ports running the game "worms," 312 * almost every interrupt serviced both transmitters! 313 * Each UART is double buffered, so if the scanner 314 * is quick enough and timing works out, we can even 315 * feed the same port twice. 316 * 317 * Ragge 980517: 318 * Do not need to turn off interrupts, already at interrupt level. 319 * Remove the pdma stuff; no great need of it right now. 320 */ 321 322 for (;;) { 323 csr = dz_read2(sc, sc->sc_dr.dr_csr); 324 if ((csr & DZ_CSR_TX_READY) == 0) 325 break; 326 327 line = DZ_PORT(csr >> 8); 328 tp = sc->sc_dz[line].dz_tty; 329 cl = &tp->t_outq; 330 tp->t_state &= ~TS_BUSY; 331 332 /* Just send out a char if we have one */ 333 /* As long as we can fill the chip buffer, we just loop here */ 334 if (cl->c_cc) { 335 tp->t_state |= TS_BUSY; 336 ch = getc(cl); 337 dz_write1(sc, sc->sc_dr.dr_tbuf, ch); 338 continue; 339 } 340 341 /* Nothing to send; clear the scan bit */ 342 /* Clear xmit scanner bit; dzstart may set it again */ 343 tcr = dz_read2(sc, sc->sc_dr.dr_tcrw); 344 tcr &= 255; 345 tcr &= ~(1 << line); 346 dz_write1(sc, sc->sc_dr.dr_tcr, tcr); 347 if (sc->sc_dz[line].dz_catch) 348 continue; 349 350 if (tp->t_state & TS_FLUSH) 351 tp->t_state &= ~TS_FLUSH; 352 else 353 ndflush (&tp->t_outq, cl->c_cc); 354 355 (*tp->t_linesw->l_start)(tp); 356 } 357 } 358 359 int 360 dzopen(dev_t dev, int flag, int mode, struct lwp *l) 361 { 362 const int line = DZ_PORT(minor(dev)); 363 struct dz_softc *sc = device_lookup_private(&dz_cd, DZ_I2C(minor(dev))); 364 struct tty *tp; 365 int error = 0; 366 367 if (sc == NULL || line >= sc->sc_type) 368 return ENXIO; 369 370 /* if some other device is using the line, it's busy */ 371 if (sc->sc_dz[line].dz_catch) 372 return EBUSY; 373 374 tp = sc->sc_dz[line].dz_tty; 375 if (tp == NULL) 376 return (ENODEV); 377 tp->t_oproc = dzstart; 378 tp->t_param = dzparam; 379 tp->t_dev = dev; 380 381 if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp)) 382 return (EBUSY); 383 384 if ((tp->t_state & TS_ISOPEN) == 0) { 385 ttychars(tp); 386 if (tp->t_ispeed == 0) { 387 tp->t_iflag = TTYDEF_IFLAG; 388 tp->t_oflag = TTYDEF_OFLAG; 389 tp->t_cflag = TTYDEF_CFLAG; 390 tp->t_lflag = TTYDEF_LFLAG; 391 tp->t_ispeed = tp->t_ospeed = TTYDEF_SPEED; 392 } 393 (void) dzparam(tp, &tp->t_termios); 394 ttsetwater(tp); 395 } 396 397 /* Use DMBIS and *not* DMSET or else we clobber incoming bits */ 398 if (dzmctl(sc, line, DML_DTR, DMBIS) & DML_DCD) 399 tp->t_state |= TS_CARR_ON; 400 mutex_spin_enter(&tty_lock); 401 while (!(flag & O_NONBLOCK) && !(tp->t_cflag & CLOCAL) && 402 !(tp->t_state & TS_CARR_ON)) { 403 tp->t_wopen++; 404 error = ttysleep(tp, &tp->t_rawcv, true, 0); 405 tp->t_wopen--; 406 if (error) 407 break; 408 } 409 mutex_spin_exit(&tty_lock); 410 if (error) 411 return (error); 412 return ((*tp->t_linesw->l_open)(dev, tp)); 413 } 414 415 /*ARGSUSED*/ 416 int 417 dzclose(dev_t dev, int flag, int mode, struct lwp *l) 418 { 419 const int line = DZ_PORT(minor(dev)); 420 struct dz_softc *sc = device_lookup_private(&dz_cd, DZ_I2C(minor(dev))); 421 struct tty *tp = sc->sc_dz[line].dz_tty; 422 423 (*tp->t_linesw->l_close)(tp, flag); 424 425 /* Make sure a BREAK state is not left enabled. */ 426 (void) dzmctl(sc, line, DML_BRK, DMBIC); 427 428 /* Do a hangup if so required. */ 429 if ((tp->t_cflag & HUPCL) || tp->t_wopen || !(tp->t_state & TS_ISOPEN)) 430 (void) dzmctl(sc, line, 0, DMSET); 431 432 return ttyclose(tp); 433 } 434 435 int 436 dzread(dev_t dev, struct uio *uio, int flag) 437 { 438 struct dz_softc *sc = device_lookup_private(&dz_cd, DZ_I2C(minor(dev))); 439 struct tty *tp = sc->sc_dz[DZ_PORT(minor(dev))].dz_tty; 440 441 return ((*tp->t_linesw->l_read)(tp, uio, flag)); 442 } 443 444 int 445 dzwrite(dev_t dev, struct uio *uio, int flag) 446 { 447 struct dz_softc *sc = device_lookup_private(&dz_cd, DZ_I2C(minor(dev))); 448 struct tty *tp = sc->sc_dz[DZ_PORT(minor(dev))].dz_tty; 449 450 return ((*tp->t_linesw->l_write)(tp, uio, flag)); 451 } 452 453 int 454 dzpoll(dev_t dev, int events, struct lwp *l) 455 { 456 struct dz_softc *sc = device_lookup_private(&dz_cd, DZ_I2C(minor(dev))); 457 struct tty *tp = sc->sc_dz[DZ_PORT(minor(dev))].dz_tty; 458 459 return ((*tp->t_linesw->l_poll)(tp, events, l)); 460 } 461 462 /*ARGSUSED*/ 463 int 464 dzioctl(dev_t dev, u_long cmd, void *data, int flag, struct lwp *l) 465 { 466 struct dz_softc *sc = device_lookup_private(&dz_cd, DZ_I2C(minor(dev))); 467 const int line = DZ_PORT(minor(dev)); 468 struct tty *tp = sc->sc_dz[line].dz_tty; 469 int error; 470 471 error = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, l); 472 if (error >= 0) 473 return (error); 474 475 error = ttioctl(tp, cmd, data, flag, l); 476 if (error >= 0) 477 return (error); 478 479 switch (cmd) { 480 case TIOCSBRK: 481 (void) dzmctl(sc, line, DML_BRK, DMBIS); 482 break; 483 484 case TIOCCBRK: 485 (void) dzmctl(sc, line, DML_BRK, DMBIC); 486 break; 487 488 case TIOCSDTR: 489 (void) dzmctl(sc, line, DML_DTR, DMBIS); 490 break; 491 492 case TIOCCDTR: 493 (void) dzmctl(sc, line, DML_DTR, DMBIC); 494 break; 495 496 case TIOCMSET: 497 (void) dzmctl(sc, line, *(int *)data, DMSET); 498 break; 499 500 case TIOCMBIS: 501 (void) dzmctl(sc, line, *(int *)data, DMBIS); 502 break; 503 504 case TIOCMBIC: 505 (void) dzmctl(sc, line, *(int *)data, DMBIC); 506 break; 507 508 case TIOCMGET: 509 *(int *)data = (dzmctl(sc, line, 0, DMGET) & ~DML_BRK); 510 break; 511 512 default: 513 return (EPASSTHROUGH); 514 } 515 return (0); 516 } 517 518 struct tty * 519 dztty(dev_t dev) 520 { 521 struct dz_softc *sc = device_lookup_private(&dz_cd, DZ_I2C(minor(dev))); 522 523 return sc->sc_dz[DZ_PORT(minor(dev))].dz_tty; 524 } 525 526 /*ARGSUSED*/ 527 void 528 dzstop(struct tty *tp, int flag) 529 { 530 if ((tp->t_state & (TS_BUSY | TS_TTSTOP)) == TS_BUSY) 531 tp->t_state |= TS_FLUSH; 532 } 533 534 void 535 dzstart(struct tty *tp) 536 { 537 struct dz_softc *sc; 538 int line; 539 int s; 540 char state; 541 542 s = spltty(); 543 if (tp->t_state & (TS_TIMEOUT|TS_BUSY|TS_TTSTOP)) { 544 splx(s); 545 return; 546 } 547 if (!ttypull(tp)) { 548 splx(s); 549 return; 550 } 551 552 line = DZ_PORT(minor(tp->t_dev)); 553 sc = device_lookup_private(&dz_cd, DZ_I2C(minor(tp->t_dev))); 554 555 tp->t_state |= TS_BUSY; 556 state = dz_read2(sc, sc->sc_dr.dr_tcrw) & 255; 557 if ((state & (1 << line)) == 0) 558 dz_write1(sc, sc->sc_dr.dr_tcr, state | (1 << line)); 559 dzxint(sc); 560 splx(s); 561 } 562 563 static int 564 dzparam(struct tty *tp, struct termios *t) 565 { 566 struct dz_softc *sc = device_lookup_private(&dz_cd, DZ_I2C(minor(tp->t_dev))); 567 const int line = DZ_PORT(minor(tp->t_dev)); 568 int cflag = t->c_cflag; 569 int ispeed = ttspeedtab(t->c_ispeed, dzspeedtab); 570 int ospeed = ttspeedtab(t->c_ospeed, dzspeedtab); 571 unsigned lpr; 572 int s; 573 574 /* check requested parameters */ 575 if (ospeed < 0 || ispeed < 0 || ispeed != ospeed) 576 return (EINVAL); 577 578 tp->t_ispeed = t->c_ispeed; 579 tp->t_ospeed = t->c_ospeed; 580 tp->t_cflag = cflag; 581 582 if (ospeed == 0) { 583 (void) dzmctl(sc, line, 0, DMSET); /* hang up line */ 584 return (0); 585 } 586 587 s = spltty(); 588 589 /* XXX This is wrong. Flush output or the chip gets very confused. */ 590 ttywait(tp); 591 592 lpr = DZ_LPR_RX_ENABLE | ((ispeed&0xF)<<8) | line; 593 594 switch (cflag & CSIZE) 595 { 596 case CS5: 597 lpr |= DZ_LPR_5_BIT_CHAR; 598 break; 599 case CS6: 600 lpr |= DZ_LPR_6_BIT_CHAR; 601 break; 602 case CS7: 603 lpr |= DZ_LPR_7_BIT_CHAR; 604 break; 605 default: 606 lpr |= DZ_LPR_8_BIT_CHAR; 607 break; 608 } 609 if (cflag & PARENB) 610 lpr |= DZ_LPR_PARENB; 611 if (cflag & PARODD) 612 lpr |= DZ_LPR_OPAR; 613 if (cflag & CSTOPB) 614 lpr |= DZ_LPR_2_STOP; 615 616 dz_write2(sc, sc->sc_dr.dr_lpr, lpr); 617 (void) splx(s); 618 DELAY(10000); 619 620 return (0); 621 } 622 623 static unsigned 624 dzmctl(struct dz_softc *sc, int line, int bits, int how) 625 { 626 unsigned status; 627 unsigned mbits; 628 unsigned bit; 629 int s; 630 631 s = spltty(); 632 mbits = 0; 633 bit = (1 << line); 634 635 /* external signals as seen from the port */ 636 status = dz_read1(sc, sc->sc_dr.dr_dcd) | sc->sc_dsr; 637 if (status & bit) 638 mbits |= DML_DCD; 639 status = dz_read1(sc, sc->sc_dr.dr_ring); 640 if (status & bit) 641 mbits |= DML_RI; 642 643 /* internal signals/state delivered to port */ 644 status = dz_read1(sc, sc->sc_dr.dr_dtr); 645 if (status & bit) 646 mbits |= DML_DTR; 647 if (sc->sc_brk & bit) 648 mbits |= DML_BRK; 649 650 switch (how) 651 { 652 case DMSET: 653 mbits = bits; 654 break; 655 656 case DMBIS: 657 mbits |= bits; 658 break; 659 660 case DMBIC: 661 mbits &= ~bits; 662 break; 663 664 case DMGET: 665 (void) splx(s); 666 return (mbits); 667 } 668 669 if (mbits & DML_DTR) { 670 dz_write1(sc, sc->sc_dr.dr_dtr, dz_read1(sc, sc->sc_dr.dr_dtr) | bit); 671 } else { 672 dz_write1(sc, sc->sc_dr.dr_dtr, dz_read1(sc, sc->sc_dr.dr_dtr) & ~bit); 673 } 674 675 if (mbits & DML_BRK) { 676 sc->sc_brk |= bit; 677 dz_write1(sc, sc->sc_dr.dr_break, sc->sc_brk); 678 } else { 679 sc->sc_brk &= ~bit; 680 dz_write1(sc, sc->sc_dr.dr_break, sc->sc_brk); 681 } 682 683 (void) splx(s); 684 685 return (mbits); 686 } 687 688 /* 689 * This is called by timeout() periodically. 690 * Check to see if modem status bits have changed. 691 */ 692 static void 693 dzscan(void *arg) 694 { 695 struct dz_softc *sc; 696 struct tty *tp; 697 int n, bit, port; 698 unsigned int csr; 699 unsigned int tmp; 700 int s; 701 702 s = spltty(); 703 for (n = 0; n < dz_cd.cd_ndevs; n++) { 704 if ((sc = device_lookup_private(&dz_cd, n)) == NULL) 705 continue; 706 707 for (port = 0; port < sc->sc_type; port++) { 708 tp = sc->sc_dz[port].dz_tty; 709 bit = (1 << port); 710 711 if ((dz_read1(sc, sc->sc_dr.dr_dcd) | sc->sc_dsr) & bit) { 712 if (!(tp->t_state & TS_CARR_ON)) 713 (*tp->t_linesw->l_modem) (tp, 1); 714 } else if ((tp->t_state & TS_CARR_ON) && 715 (*tp->t_linesw->l_modem)(tp, 0) == 0) { 716 tmp = dz_read2(sc, sc->sc_dr.dr_tcrw) & 255; 717 dz_write1(sc, sc->sc_dr.dr_tcr, tmp & ~bit); 718 } 719 } 720 721 /* 722 * If the RX interrupt rate is this high, switch 723 * the controller to Silo Alarm - which means don't 724 * interrupt until the RX silo has 16 characters in 725 * it (the silo is 64 characters in all). 726 * Avoid oscillating SA on and off by not turning 727 * if off unless the rate is appropriately low. 728 */ 729 csr = dz_read2(sc, sc->sc_dr.dr_csr); 730 tmp = csr; 731 if (sc->sc_rxint > 16*10) 732 csr |= DZ_CSR_SAE; 733 else if (sc->sc_rxint < 10) 734 csr &= ~DZ_CSR_SAE; 735 if (csr != tmp) 736 dz_write2(sc, sc->sc_dr.dr_csr, csr); 737 sc->sc_rxint = 0; 738 739 dzxint(sc); 740 dzrint(sc); 741 } 742 (void) splx(s); 743 callout_reset(&dzscan_ch, hz, dzscan, NULL); 744 } 745 746 /* 747 * Called after an ubareset. The DZ card is reset, but the only thing 748 * that must be done is to start the receiver and transmitter again. 749 * No DMA setup to care about. 750 */ 751 void 752 dzreset(device_t dev) 753 { 754 struct dz_softc *sc = device_private(dev); 755 struct tty *tp; 756 int i; 757 758 for (i = 0; i < sc->sc_type; i++) { 759 tp = sc->sc_dz[i].dz_tty; 760 761 if (((tp->t_state & TS_ISOPEN) == 0) || (tp->t_wopen == 0)) 762 continue; 763 764 dzparam(tp, &tp->t_termios); 765 dzmctl(sc, i, DML_DTR, DMSET); 766 tp->t_state &= ~TS_BUSY; 767 dzstart(tp); /* Kick off transmitter again */ 768 } 769 } 770