1 /* $NetBSD: ccdvar.h,v 1.35 2015/09/06 06:00:59 dholland Exp $ */ 2 3 /*- 4 * Copyright (c) 1996, 1997, 1998, 1999, 2007, 2009 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Jason R. Thorpe. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * Copyright (c) 1988 University of Utah. 34 * Copyright (c) 1990, 1993 35 * The Regents of the University of California. All rights reserved. 36 * 37 * This code is derived from software contributed to Berkeley by 38 * the Systems Programming Group of the University of Utah Computer 39 * Science Department. 40 * 41 * Redistribution and use in source and binary forms, with or without 42 * modification, are permitted provided that the following conditions 43 * are met: 44 * 1. Redistributions of source code must retain the above copyright 45 * notice, this list of conditions and the following disclaimer. 46 * 2. Redistributions in binary form must reproduce the above copyright 47 * notice, this list of conditions and the following disclaimer in the 48 * documentation and/or other materials provided with the distribution. 49 * 3. Neither the name of the University nor the names of its contributors 50 * may be used to endorse or promote products derived from this software 51 * without specific prior written permission. 52 * 53 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 54 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 55 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 56 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 57 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 58 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 59 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 60 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 61 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 62 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 63 * SUCH DAMAGE. 64 * 65 * from: Utah $Hdr: cdvar.h 1.1 90/07/09$ 66 * 67 * @(#)cdvar.h 8.1 (Berkeley) 6/10/93 68 */ 69 70 #ifndef _DEV_CCDVAR_H_ 71 #define _DEV_CCDVAR_H_ 72 73 #include <sys/buf.h> 74 #include <sys/ioccom.h> 75 #include <sys/mutex.h> 76 #include <sys/queue.h> 77 #include <sys/condvar.h> 78 79 /* 80 * Dynamic configuration and disklabel support by: 81 * Jason R. Thorpe <thorpej@nas.nasa.gov> 82 * Numerical Aerodynamic Simulation Facility 83 * Mail Stop 258-6 84 * NASA Ames Research Center 85 * Moffett Field, CA 94035 86 */ 87 88 /* 89 * This structure is used to configure a ccd via ioctl(2). 90 */ 91 struct ccd_ioctl { 92 char **ccio_disks; /* pointer to component paths */ 93 u_int ccio_ndisks; /* number of disks to concatenate */ 94 int ccio_ileave; /* interleave (DEV_BSIZE blocks) */ 95 int ccio_flags; /* see sc_flags below */ 96 int ccio_unit; /* unit number: use varies */ 97 uint64_t ccio_size; /* (returned) size of ccd */ 98 }; 99 100 101 /* 102 * Component info table. 103 * Describes a single component of a concatenated disk. 104 */ 105 struct ccdcinfo { 106 struct vnode *ci_vp; /* device's vnode */ 107 dev_t ci_dev; /* XXX: device's dev_t */ 108 uint64_t ci_size; /* size */ 109 char *ci_path; /* path to component */ 110 size_t ci_pathlen; /* length of component path */ 111 }; 112 113 /* 114 * Interleave description table. 115 * Computed at boot time to speed irregular-interleave lookups. 116 * The idea is that we interleave in "groups". First we interleave 117 * evenly over all component disks up to the size of the smallest 118 * component (the first group), then we interleave evenly over all 119 * remaining disks up to the size of the next-smallest (second group), 120 * and so on. 121 * 122 * Each table entry describes the interleave characteristics of one 123 * of these groups. For example if a concatenated disk consisted of 124 * three components of 5, 3, and 7 DEV_BSIZE blocks interleaved at 125 * DEV_BSIZE (1), the table would have three entries: 126 * 127 * ndisk startblk startoff dev 128 * 3 0 0 0, 1, 2 129 * 2 9 3 0, 2 130 * 1 13 5 2 131 * 0 - - - 132 * 133 * which says that the first nine blocks (0-8) are interleaved over 134 * 3 disks (0, 1, 2) starting at block offset 0 on any component disk, 135 * the next 4 blocks (9-12) are interleaved over 2 disks (0, 2) starting 136 * at component block 3, and the remaining blocks (13-14) are on disk 137 * 2 starting at offset 5. 138 */ 139 struct ccdiinfo { 140 int ii_ndisk; /* # of disks range is interleaved over */ 141 daddr_t ii_startblk; /* starting scaled block # for range */ 142 daddr_t ii_startoff; /* starting component offset (block #) */ 143 int *ii_index; /* ordered list of components in range */ 144 size_t ii_indexsz; /* size of memory area */ 145 }; 146 147 /* 148 * Concatenated disk pseudo-geometry information. 149 */ 150 struct ccdgeom { 151 u_int32_t ccg_secsize; /* # bytes per sector */ 152 u_int32_t ccg_nsectors; /* # data sectors per track */ 153 u_int32_t ccg_ntracks; /* # tracks per cylinder */ 154 u_int32_t ccg_ncylinders; /* # cylinders per unit */ 155 }; 156 157 struct ccdbuf; 158 159 /* 160 * A concatenated disk is described after initialization by this structure. 161 */ 162 struct ccd_softc { 163 int sc_unit; 164 int sc_flags; /* flags */ 165 uint64_t sc_size; /* size of ccd */ 166 int sc_ileave; /* interleave */ 167 u_int sc_nccdisks; /* number of components */ 168 #define CCD_MAXNDISKS 65536 169 struct ccdcinfo *sc_cinfo; /* component info */ 170 struct ccdiinfo *sc_itable; /* interleave table */ 171 struct ccdgeom sc_geom; /* pseudo geometry info */ 172 char sc_xname[8]; /* XXX external name */ 173 struct disk sc_dkdev; /* generic disk device info */ 174 kmutex_t sc_dvlock; /* lock on device node */ 175 struct bufq_state *sc_bufq; /* buffer queue */ 176 kmutex_t *sc_iolock; /* lock on I/O start/stop */ 177 kcondvar_t sc_stop; /* when inflight goes zero */ 178 struct lwp *sc_thread; /* for deferred I/O */ 179 kcondvar_t sc_push; /* for deferred I/O */ 180 bool sc_zap; /* for deferred I/O */ 181 LIST_ENTRY(ccd_softc) sc_link; 182 }; 183 184 /* sc_flags */ 185 #define CCDF_UNIFORM 0x002 /* use LCCD of sizes for uniform interleave */ 186 #define CCDF_NOLABEL 0x004 /* ignore on-disk (raw) disklabel */ 187 188 #define CCDF_INITED 0x010 /* unit has been initialized */ 189 #define CCDF_WLABEL 0x020 /* label area is writable */ 190 #define CCDF_LABELLING 0x040 /* unit is currently being labelled */ 191 #define CCDF_KLABEL 0x080 /* keep label on close */ 192 #define CCDF_VLABEL 0x100 /* label is valid */ 193 #define CCDF_RLABEL 0x200 /* currently reading label */ 194 195 /* Mask of user-settable ccd flags. */ 196 #define CCDF_USERMASK (CCDF_UNIFORM|CCDF_NOLABEL) 197 198 /* 199 * Before you can use a unit, it must be configured with CCDIOCSET. 200 * The configuration persists across opens and closes of the device; 201 * a CCDIOCCLR must be used to reset a configuration. An attempt to 202 * CCDIOCSET an already active unit will return EBUSY. Attempts to 203 * CCDIOCCLR an inactive unit will return ENXIO. 204 */ 205 #define CCDIOCSET _IOWR('F', 16, struct ccd_ioctl) /* enable ccd */ 206 #define CCDIOCCLR _IOW('F', 17, struct ccd_ioctl) /* disable ccd */ 207 208 #if defined(COMPAT_60) && !defined(_LP64) 209 /* 210 * Old version with incorrect ccio_size 211 */ 212 struct ccd_ioctl_60 { 213 char **ccio_disks; /* pointer to component paths */ 214 u_int ccio_ndisks; /* number of disks to concatenate */ 215 int ccio_ileave; /* interleave (DEV_BSIZE blocks) */ 216 int ccio_flags; /* see sc_flags below */ 217 int ccio_unit; /* unit number: use varies */ 218 size_t ccio_size; /* (returned) size of ccd */ 219 }; 220 221 #define CCDIOCSET_60 _IOWR('F', 16, struct ccd_ioctl_60) /* enable ccd */ 222 #define CCDIOCCLR_60 _IOW('F', 17, struct ccd_ioctl_60) /* disable ccd */ 223 #endif /* COMPAT_60 && !LP64*/ 224 /* 225 * Sysctl information 226 */ 227 struct ccddiskinfo { 228 int ccd_ileave; 229 u_int ccd_ndisks; 230 uint64_t ccd_size; 231 int ccd_flags; 232 }; 233 234 #endif /* _DEV_CCDVAR_H_ */ 235