1 /* $NetBSD: ahc_cardbus.c,v 1.35 2011/08/01 11:20:27 drochner Exp $ */ 2 3 /*- 4 * Copyright (c) 2000, 2005 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, 9 * NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 /* 34 * CardBus front-end for the Adaptec AIC-7xxx family of SCSI controllers. 35 * 36 * TODO: 37 * - power management 38 */ 39 40 #include <sys/cdefs.h> 41 __KERNEL_RCSID(0, "$NetBSD: ahc_cardbus.c,v 1.35 2011/08/01 11:20:27 drochner Exp $"); 42 43 #include "opt_ahc_cardbus.h" 44 45 #include <sys/param.h> 46 #include <sys/systm.h> 47 #include <sys/malloc.h> 48 #include <sys/kernel.h> 49 #include <sys/queue.h> 50 #include <sys/device.h> 51 52 #include <sys/bus.h> 53 #include <sys/intr.h> 54 55 #include <dev/scsipi/scsi_all.h> 56 #include <dev/scsipi/scsipi_all.h> 57 #include <dev/scsipi/scsiconf.h> 58 59 #include <dev/pci/pcireg.h> 60 61 #include <dev/cardbus/cardbusvar.h> 62 #include <dev/pci/pcidevs.h> 63 64 #include <dev/ic/aic7xxx_osm.h> 65 #include <dev/ic/aic7xxx_inline.h> 66 67 68 #ifndef AHC_CARDBUS_DEFAULT_SCSI_ID 69 #define AHC_CARDBUS_DEFAULT_SCSI_ID 0x7 70 #endif 71 72 #define AHC_CARDBUS_IOBA 0x10 73 #define AHC_CARDBUS_MMBA 0x14 74 75 struct ahc_cardbus_softc { 76 struct ahc_softc sc_ahc; /* real AHC */ 77 78 /* CardBus-specific goo. */ 79 cardbus_devfunc_t sc_ct; /* our CardBus devfuncs */ 80 pcitag_t sc_tag; 81 82 int sc_bar; 83 pcireg_t sc_csr; 84 bus_size_t sc_size; 85 }; 86 87 int ahc_cardbus_match(device_t, cfdata_t, void *); 88 void ahc_cardbus_attach(device_t, device_t, void *); 89 int ahc_cardbus_detach(device_t, int); 90 91 CFATTACH_DECL_NEW(ahc_cardbus, sizeof(struct ahc_cardbus_softc), 92 ahc_cardbus_match, ahc_cardbus_attach, ahc_cardbus_detach, NULL); 93 94 int 95 ahc_cardbus_match(device_t parent, cfdata_t match, void *aux) 96 { 97 struct cardbus_attach_args *ca = aux; 98 99 if (PCI_VENDOR(ca->ca_id) == PCI_VENDOR_ADP && 100 PCI_PRODUCT(ca->ca_id) == PCI_PRODUCT_ADP_APA1480) 101 return (1); 102 103 return (0); 104 } 105 106 void 107 ahc_cardbus_attach(device_t parent, device_t self, void *aux) 108 { 109 struct cardbus_attach_args *ca = aux; 110 struct ahc_cardbus_softc *csc = device_private(self); 111 struct ahc_softc *ahc = &csc->sc_ahc; 112 cardbus_devfunc_t ct = ca->ca_ct; 113 bus_space_tag_t bst; 114 bus_space_handle_t bsh; 115 pcireg_t reg; 116 u_int sxfrctl1 = 0; 117 u_char sblkctl; 118 119 120 ahc->sc_dev = self; 121 csc->sc_ct = ct; 122 csc->sc_tag = ca->ca_tag; 123 124 printf(": Adaptec ADP-1480 SCSI\n"); 125 126 /* 127 * Map the device. 128 */ 129 csc->sc_csr = PCI_COMMAND_MASTER_ENABLE; 130 if (Cardbus_mapreg_map(csc->sc_ct, AHC_CARDBUS_MMBA, 131 PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0, 132 &bst, &bsh, NULL, &csc->sc_size) == 0) { 133 csc->sc_bar = AHC_CARDBUS_MMBA; 134 csc->sc_csr |= PCI_COMMAND_MEM_ENABLE; 135 } else if (Cardbus_mapreg_map(csc->sc_ct, AHC_CARDBUS_IOBA, 136 PCI_MAPREG_TYPE_IO, 0, &bst, &bsh, NULL, &csc->sc_size) == 0) { 137 csc->sc_bar = AHC_CARDBUS_IOBA; 138 csc->sc_csr |= PCI_COMMAND_IO_ENABLE; 139 } else { 140 csc->sc_bar = 0; 141 printf("%s: unable to map device registers\n", 142 ahc_name(ahc)); 143 return; 144 } 145 146 /* Enable the appropriate bits in the PCI CSR. */ 147 reg = Cardbus_conf_read(ct, ca->ca_tag, PCI_COMMAND_STATUS_REG); 148 reg &= ~(PCI_COMMAND_IO_ENABLE|PCI_COMMAND_MEM_ENABLE); 149 reg |= csc->sc_csr; 150 Cardbus_conf_write(ct, ca->ca_tag, PCI_COMMAND_STATUS_REG, reg); 151 152 /* 153 * Make sure the latency timer is set to some reasonable 154 * value. 155 */ 156 reg = Cardbus_conf_read(ct, ca->ca_tag, PCI_BHLC_REG); 157 if (PCI_LATTIMER(reg) < 0x20) { 158 reg &= ~(PCI_LATTIMER_MASK << PCI_LATTIMER_SHIFT); 159 reg |= (0x20 << PCI_LATTIMER_SHIFT); 160 Cardbus_conf_write(ct, ca->ca_tag, PCI_BHLC_REG, reg); 161 } 162 163 ahc_set_name(ahc, device_xname(ahc->sc_dev)); 164 165 ahc->parent_dmat = ca->ca_dmat; 166 ahc->tag = bst; 167 ahc->bsh = bsh; 168 169 /* 170 * ADP-1480 is always an AIC-7860. 171 */ 172 ahc->chip = AHC_AIC7860 | AHC_PCI; 173 ahc->features = AHC_AIC7860_FE|AHC_REMOVABLE; 174 ahc->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG|AHC_PCI_MWI_BUG; 175 if (PCI_REVISION(ca->ca_class) >= 1) 176 ahc->bugs |= AHC_PCI_2_1_RETRY_BUG; 177 178 if (ahc_softc_init(ahc) != 0) 179 return; 180 181 /* 182 * On all CardBus adapters, we allow SCB paging. 183 */ 184 ahc->flags = AHC_PAGESCBS; 185 186 ahc->channel = 'A'; 187 188 ahc_intr_enable(ahc, FALSE); 189 190 ahc_reset(ahc); 191 192 /* 193 * Establish the interrupt. 194 */ 195 ahc->ih = Cardbus_intr_establish(ct, IPL_BIO, ahc_intr, ahc); 196 if (ahc->ih == NULL) { 197 printf("%s: unable to establish interrupt\n", 198 ahc_name(ahc)); 199 return; 200 } 201 202 ahc->seep_config = malloc(sizeof(*ahc->seep_config), 203 M_DEVBUF, M_NOWAIT); 204 if (ahc->seep_config == NULL) 205 return; 206 207 ahc_check_extport(ahc, &sxfrctl1); 208 /* 209 * Take the LED out of diagnostic mode. 210 */ 211 sblkctl = ahc_inb(ahc, SBLKCTL); 212 ahc_outb(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON))); 213 214 /* 215 * I don't know where this is set in the SEEPROM or by the 216 * BIOS, so we default to 100%. 217 */ 218 ahc_outb(ahc, DSPCISTATUS, DFTHRSH_100); 219 220 if (ahc->flags & AHC_USEDEFAULTS) { 221 int our_id; 222 /* 223 * Assume only one connector and always turn 224 * on termination. 225 */ 226 our_id = AHC_CARDBUS_DEFAULT_SCSI_ID; 227 sxfrctl1 = STPWEN; 228 ahc_outb(ahc, SCSICONF, our_id | ENSPCHK | RESET_SCSI); 229 ahc->our_id = our_id; 230 } 231 232 printf("%s: aic7860", ahc_name(ahc)); 233 234 /* 235 * Record our termination setting for the 236 * generic initialization routine. 237 */ 238 if ((sxfrctl1 & STPWEN) != 0) 239 ahc->flags |= AHC_TERM_ENB_A; 240 241 if (ahc_init(ahc)) { 242 ahc_free(ahc); 243 return; 244 } 245 246 ahc_attach(ahc); 247 } 248 249 int 250 ahc_cardbus_detach(device_t self, int flags) 251 { 252 struct ahc_cardbus_softc *csc = device_private(self); 253 struct ahc_softc *ahc = &csc->sc_ahc; 254 255 int rv; 256 257 rv = ahc_detach(ahc, flags); 258 if (rv) 259 return rv; 260 261 if (ahc->ih) { 262 Cardbus_intr_disestablish(csc->sc_ct, ahc->ih); 263 ahc->ih = 0; 264 } 265 266 if (csc->sc_bar != 0) { 267 Cardbus_mapreg_unmap(csc->sc_ct, csc->sc_bar, 268 ahc->tag, ahc->bsh, csc->sc_size); 269 csc->sc_bar = 0; 270 } 271 272 return (0); 273 } 274