1 /* $NetBSD: atareg.h,v 1.40 2011/10/24 20:52:34 jakllsch Exp $ */ 2 3 /* 4 * Copyright (c) 1998, 2001 Manuel Bouyer. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27 /*- 28 * Copyright (c) 1991 The Regents of the University of California. 29 * All rights reserved. 30 * 31 * This code is derived from software contributed to Berkeley by 32 * William Jolitz. 33 * 34 * Redistribution and use in source and binary forms, with or without 35 * modification, are permitted provided that the following conditions 36 * are met: 37 * 1. Redistributions of source code must retain the above copyright 38 * notice, this list of conditions and the following disclaimer. 39 * 2. Redistributions in binary form must reproduce the above copyright 40 * notice, this list of conditions and the following disclaimer in the 41 * documentation and/or other materials provided with the distribution. 42 * 3. Neither the name of the University nor the names of its contributors 43 * may be used to endorse or promote products derived from this software 44 * without specific prior written permission. 45 * 46 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 47 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 48 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 49 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 50 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 51 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 52 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 53 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 54 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 55 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 56 * SUCH DAMAGE. 57 * 58 * @(#)wdreg.h 7.1 (Berkeley) 5/9/91 59 */ 60 61 #ifndef _DEV_ATA_ATAREG_H_ 62 #define _DEV_ATA_ATAREG_H_ 63 64 /* 65 * ATA Task File register definitions. 66 */ 67 68 /* Status bits. */ 69 #define WDCS_BSY 0x80 /* busy */ 70 #define WDCS_DRDY 0x40 /* drive ready */ 71 #define WDCS_DWF 0x20 /* drive write fault */ 72 #define WDCS_DSC 0x10 /* drive seek complete */ 73 #define WDCS_DRQ 0x08 /* data request */ 74 #define WDCS_CORR 0x04 /* corrected data */ 75 #define WDCS_IDX 0x02 /* index */ 76 #define WDCS_ERR 0x01 /* error */ 77 #define WDCS_BITS \ 78 "\020\010bsy\007drdy\006dwf\005dsc\004drq\003corr\002idx\001err" 79 80 /* Error bits. */ 81 #define WDCE_BBK 0x80 /* bad block detected */ 82 #define WDCE_CRC 0x80 /* CRC error (Ultra-DMA only) */ 83 #define WDCE_UNC 0x40 /* uncorrectable data error */ 84 #define WDCE_MC 0x20 /* media changed */ 85 #define WDCE_IDNF 0x10 /* id not found */ 86 #define WDCE_MCR 0x08 /* media change requested */ 87 #define WDCE_ABRT 0x04 /* aborted command */ 88 #define WDCE_TK0NF 0x02 /* track 0 not found */ 89 #define WDCE_AMNF 0x01 /* address mark not found */ 90 91 /* Commands for Disk Controller. */ 92 #define WDCC_NOP 0x00 /* Always fail with "aborted command" */ 93 #define WDCC_RECAL 0x10 /* disk restore code -- resets cntlr */ 94 95 #define WDCC_READ 0x20 /* disk read code */ 96 #define WDCC_WRITE 0x30 /* disk write code */ 97 #define WDCC__LONG 0x02 /* modifier -- access ecc bytes */ 98 #define WDCC__NORETRY 0x01 /* modifier -- no retrys */ 99 100 #define WDCC_FORMAT 0x50 /* disk format code */ 101 #define WDCC_DIAGNOSE 0x90 /* controller diagnostic */ 102 #define WDCC_IDP 0x91 /* initialize drive parameters */ 103 104 #define WDCC_SMART 0xb0 /* Self Mon, Analysis, Reporting Tech */ 105 106 #define WDCC_READMULTI 0xc4 /* read multiple */ 107 #define WDCC_WRITEMULTI 0xc5 /* write multiple */ 108 #define WDCC_SETMULTI 0xc6 /* set multiple mode */ 109 110 #define WDCC_READDMA 0xc8 /* read with DMA */ 111 #define WDCC_WRITEDMA 0xca /* write with DMA */ 112 113 #define WDCC_ACKMC 0xdb /* acknowledge media change */ 114 #define WDCC_LOCK 0xde /* lock drawer */ 115 #define WDCC_UNLOCK 0xdf /* unlock drawer */ 116 117 #define WDCC_FLUSHCACHE 0xe7 /* Flush cache */ 118 #define WDCC_FLUSHCACHE_EXT 0xea /* Flush cache ext */ 119 #define WDCC_IDENTIFY 0xec /* read parameters from controller */ 120 #define SET_FEATURES 0xef /* set features */ 121 122 #define WDCC_IDLE 0xe3 /* set idle timer & enter idle mode */ 123 #define WDCC_IDLE_IMMED 0xe1 /* enter idle mode */ 124 #define WDCC_SLEEP 0xe6 /* enter sleep mode */ 125 #define WDCC_STANDBY 0xe2 /* set standby timer & enter standby */ 126 #define WDCC_STANDBY_IMMED 0xe0 /* enter standby mode */ 127 #define WDCC_CHECK_PWR 0xe5 /* check power mode */ 128 129 #define WDCC_SECURITY_FREEZE 0xf5 /* freeze locking state */ 130 131 /* Big Drive support */ 132 #define WDCC_READ_EXT 0x24 /* read 48-bit addressing */ 133 #define WDCC_WRITE_EXT 0x34 /* write 48-bit addressing */ 134 135 #define WDCC_READMULTI_EXT 0x29 /* read multiple 48-bit addressing */ 136 #define WDCC_WRITEMULTI_EXT 0x39 /* write multiple 48-bit addressing */ 137 138 #define WDCC_READDMA_EXT 0x25 /* read 48-bit addressing with DMA */ 139 #define WDCC_WRITEDMA_EXT 0x35 /* write 48-bit addressing with DMA */ 140 141 #if defined(_KERNEL) || defined(_STANDALONE) 142 #include <dev/ata/ataconf.h> 143 144 /* Convert a 32-bit command to a 48-bit command. */ 145 static __inline int 146 atacmd_to48(int cmd32) 147 { 148 switch (cmd32) { 149 case WDCC_READ: 150 return WDCC_READ_EXT; 151 case WDCC_WRITE: 152 return WDCC_WRITE_EXT; 153 case WDCC_READMULTI: 154 return WDCC_READMULTI_EXT; 155 case WDCC_WRITEMULTI: 156 return WDCC_WRITEMULTI_EXT; 157 #if NATA_DMA 158 case WDCC_READDMA: 159 return WDCC_READDMA_EXT; 160 case WDCC_WRITEDMA: 161 return WDCC_WRITEDMA_EXT; 162 #endif 163 default: 164 panic("atacmd_to48: illegal 32-bit command: %d", cmd32); 165 /* NOTREACHED */ 166 } 167 } 168 #endif /* _KERNEL || _STANDALONE */ 169 170 /* Native SATA command queueing */ 171 #define WDCC_READ_FPDMA_QUEUED 0x60 /* SATA native queued read (48bit) */ 172 #define WDCC_WRITE_FPDMA_QUEUED 0x61 /* SATA native queued write (48bit) */ 173 174 #ifdef _KERNEL 175 /* Convert a 32-bit command to a Native SATA Queued command. */ 176 static __inline int 177 atacmd_tostatq(int cmd32) 178 { 179 switch (cmd32) { 180 case WDCC_READDMA: 181 return WDCC_READ_FPDMA_QUEUED; 182 case WDCC_WRITEDMA: 183 return WDCC_WRITE_FPDMA_QUEUED; 184 default: 185 panic("atacmd_tosataq: illegal 32-bit command: %d", cmd32); 186 /* NOTREACHED */ 187 } 188 } 189 #endif /* _KERNEL */ 190 191 /* Subcommands for SET_FEATURES (features register) */ 192 #define WDSF_8BIT_PIO_EN 0x01 193 #define WDSF_WRITE_CACHE_EN 0x02 194 #define WDSF_SET_MODE 0x03 195 #define WDSF_REASSIGN_EN 0x04 196 #define WDSF_APM_EN 0x05 197 #define WDSF_PUIS_EN 0x06 198 #define WDSF_PUIS_SPIN_UP 0x07 199 #define WDSF_SATA_EN 0x10 200 #define WDSF_RETRY_DS 0x33 201 #define WDSF_AAM_EN 0x42 202 #define WDSF_SET_CACHE_SGMT 0x54 203 #define WDSF_READAHEAD_DS 0x55 204 #define WDSF_POD_DS 0x66 205 #define WDSF_ECC_DS 0x77 206 #define WDSF_WRITE_CACHE_DS 0x82 207 #define WDSF_REASSIGN_DS 0x84 208 #define WDSF_APM_DS 0x85 209 #define WDSF_PUIS_DS 0x86 210 #define WDSF_ECC_EN 0x88 211 #define WDSF_SATA_DS 0x90 212 #define WDSF_RETRY_EN 0x99 213 #define WDSF_SET_CURRENT 0x9a 214 #define WDSF_READAHEAD_EN 0xaa 215 #define WDSF_PREFETCH_SET 0xab 216 #define WDSF_AAM_DS 0xc2 217 #define WDSF_POD_EN 0xcc 218 219 /* Subcommands for WDSF_SATA (count register) */ 220 #define WDSF_SATA_NONZERO_OFFSETS 0x01 221 #define WDSF_SATA_DMA_SETUP_AUTO 0x02 222 #define WDSF_SATA_DRIVE_PWR_MGMT 0x03 223 #define WDSF_SATA_IN_ORDER_DATA 0x04 224 #define WDSF_SATA_ASYNC_NOTIFY 0x05 225 #define WDSF_SATA_SW_STTNGS_PRS 0x06 226 227 /* Subcommands for SMART (features register) */ 228 #define WDSM_RD_DATA 0xd0 229 #define WDSM_RD_THRESHOLDS 0xd1 230 #define WDSM_ATTR_AUTOSAVE_EN 0xd2 231 #define WDSM_SAVE_ATTR 0xd3 232 #define WDSM_EXEC_OFFL_IMM 0xd4 233 #define WDSM_RD_LOG 0xd5 234 #define WDSM_ENABLE_OPS 0xd8 235 #define WDSM_DISABLE_OPS 0xd9 236 #define WDSM_STATUS 0xda 237 238 #define WDSMART_CYL 0xc24f 239 240 /* parameters uploaded to device/heads register */ 241 #define WDSD_IBM 0xa0 /* forced to 512 byte sector, ecc */ 242 #define WDSD_CHS 0x00 /* cylinder/head/sector addressing */ 243 #define WDSD_LBA 0x40 /* logical block addressing */ 244 245 /* Commands for ATAPI devices */ 246 #define ATAPI_CHECK_POWER_MODE 0xe5 247 #define ATAPI_EXEC_DRIVE_DIAGS 0x90 248 #define ATAPI_IDLE_IMMEDIATE 0xe1 249 #define ATAPI_NOP 0x00 250 #define ATAPI_PKT_CMD 0xa0 251 #define ATAPI_IDENTIFY_DEVICE 0xa1 252 #define ATAPI_SOFT_RESET 0x08 253 #define ATAPI_SLEEP 0xe6 254 #define ATAPI_STANDBY_IMMEDIATE 0xe0 255 256 /* Bytes used by ATAPI_PACKET_COMMAND (feature register) */ 257 #define ATAPI_PKT_CMD_FTRE_DMA 0x01 258 #define ATAPI_PKT_CMD_FTRE_OVL 0x02 259 260 /* ireason */ 261 #define WDCI_CMD 0x01 /* command(1) or data(0) */ 262 #define WDCI_IN 0x02 /* transfer to(1) or from(0) the host */ 263 #define WDCI_RELEASE 0x04 /* bus released until completion */ 264 265 #define PHASE_CMDOUT (WDCS_DRQ | WDCI_CMD) 266 #define PHASE_DATAIN (WDCS_DRQ | WDCI_IN) 267 #define PHASE_DATAOUT (WDCS_DRQ) 268 #define PHASE_COMPLETED (WDCI_IN | WDCI_CMD) 269 #define PHASE_ABORTED (0) 270 271 /* 272 * Drive parameter structure for ATA/ATAPI. 273 * Bit fields: WDC_* : common to ATA/ATAPI 274 * ATA_* : ATA only 275 * ATAPI_* : ATAPI only. 276 */ 277 struct ataparams { 278 /* drive info */ 279 uint16_t atap_config; /* 0: general configuration */ 280 #define WDC_CFG_ATAPI_MASK 0xc000 281 #define WDC_CFG_ATAPI 0x8000 282 #define ATA_CFG_REMOVABLE 0x0080 283 #define ATA_CFG_FIXED 0x0040 284 #define ATAPI_CFG_TYPE_MASK 0x1f00 285 #define ATAPI_CFG_TYPE(x) (((x) & ATAPI_CFG_TYPE_MASK) >> 8) 286 #define ATAPI_CFG_REMOV 0x0080 287 #define ATAPI_CFG_DRQ_MASK 0x0060 288 #define ATAPI_CFG_STD_DRQ 0x0000 289 #define ATAPI_CFG_IRQ_DRQ 0x0020 290 #define ATAPI_CFG_ACCEL_DRQ 0x0040 291 #define ATAPI_CFG_CMD_MASK 0x0003 292 #define ATAPI_CFG_CMD_12 0x0000 293 #define ATAPI_CFG_CMD_16 0x0001 294 /* words 1-9 are ATA only */ 295 uint16_t atap_cylinders; /* 1: # of non-removable cylinders */ 296 uint16_t __reserved1; 297 uint16_t atap_heads; /* 3: # of heads */ 298 uint16_t __retired1[2]; /* 4-5: # of unform. bytes/track */ 299 uint16_t atap_sectors; /* 6: # of sectors */ 300 uint16_t __retired2[3]; 301 302 uint8_t atap_serial[20]; /* 10-19: serial number */ 303 uint16_t __retired3[2]; 304 uint16_t __obsolete1; 305 uint8_t atap_revision[8]; /* 23-26: firmware revision */ 306 uint8_t atap_model[40]; /* 27-46: model number */ 307 uint16_t atap_multi; /* 47: maximum sectors per irq (ATA) */ 308 uint16_t __reserved2; 309 uint16_t atap_capabilities1; /* 49: capability flags */ 310 #define WDC_CAP_IORDY 0x0800 311 #define WDC_CAP_IORDY_DSBL 0x0400 312 #define WDC_CAP_LBA 0x0200 313 #define WDC_CAP_DMA 0x0100 314 #define ATA_CAP_STBY 0x2000 315 #define ATAPI_CAP_INTERL_DMA 0x8000 316 #define ATAPI_CAP_CMD_QUEUE 0x4000 317 #define ATAPI_CAP_OVERLP 0X2000 318 #define ATAPI_CAP_ATA_RST 0x1000 319 uint16_t atap_capabilities2; /* 50: capability flags (ATA) */ 320 #if BYTE_ORDER == LITTLE_ENDIAN 321 uint8_t __junk2; 322 uint8_t atap_oldpiotiming; /* 51: old PIO timing mode */ 323 uint8_t __junk3; 324 uint8_t atap_olddmatiming; /* 52: old DMA timing mode (ATA) */ 325 #else 326 uint8_t atap_oldpiotiming; /* 51: old PIO timing mode */ 327 uint8_t __junk2; 328 uint8_t atap_olddmatiming; /* 52: old DMA timing mode (ATA) */ 329 uint8_t __junk3; 330 #endif 331 uint16_t atap_extensions; /* 53: extensions supported */ 332 #define WDC_EXT_UDMA_MODES 0x0004 333 #define WDC_EXT_MODES 0x0002 334 #define WDC_EXT_GEOM 0x0001 335 /* words 54-62 are ATA only */ 336 uint16_t atap_curcylinders; /* 54: current logical cylinders */ 337 uint16_t atap_curheads; /* 55: current logical heads */ 338 uint16_t atap_cursectors; /* 56: current logical sectors/tracks */ 339 uint16_t atap_curcapacity[2]; /* 57-58: current capacity */ 340 uint16_t atap_curmulti; /* 59: current multi-sector setting */ 341 #define WDC_MULTI_VALID 0x0100 342 #define WDC_MULTI_MASK 0x00ff 343 uint16_t atap_capacity[2]; /* 60-61: total capacity (LBA only) */ 344 uint16_t __retired4; 345 #if BYTE_ORDER == LITTLE_ENDIAN 346 uint8_t atap_dmamode_supp; /* 63: multiword DMA mode supported */ 347 uint8_t atap_dmamode_act; /* multiword DMA mode active */ 348 uint8_t atap_piomode_supp; /* 64: PIO mode supported */ 349 uint8_t __junk4; 350 #else 351 uint8_t atap_dmamode_act; /* multiword DMA mode active */ 352 uint8_t atap_dmamode_supp; /* 63: multiword DMA mode supported */ 353 uint8_t __junk4; 354 uint8_t atap_piomode_supp; /* 64: PIO mode supported */ 355 #endif 356 uint16_t atap_dmatiming_mimi; /* 65: minimum DMA cycle time */ 357 uint16_t atap_dmatiming_recom; /* 66: recommended DMA cycle time */ 358 uint16_t atap_piotiming; /* 67: mini PIO cycle time without FC */ 359 uint16_t atap_piotiming_iordy; /* 68: mini PIO cycle time with IORDY FC */ 360 uint16_t __reserved3[2]; 361 /* words 71-72 are ATAPI only */ 362 uint16_t atap_pkt_br; /* 71: time (ns) to bus release */ 363 uint16_t atap_pkt_bsyclr; /* 72: tme to clear BSY after service */ 364 uint16_t __reserved4[2]; 365 uint16_t atap_queuedepth; /* 75: */ 366 #define WDC_QUEUE_DEPTH_MASK 0x1F 367 uint16_t atap_sata_caps; /* 76: */ 368 #define SATA_SIGNAL_GEN1 0x02 369 #define SATA_SIGNAL_GEN2 0x04 370 #define SATA_SIGNAL_GEN3 0x08 371 #define SATA_NATIVE_CMDQ 0x0100 372 #define SATA_HOST_PWR_MGMT 0x0200 373 #define SATA_PHY_EVNT_CNT 0x0400 374 uint16_t atap_sata_reserved; /* 77: */ 375 uint16_t atap_sata_features_supp; /* 78: */ 376 #define SATA_NONZERO_OFFSETS 0x02 377 #define SATA_DMA_SETUP_AUTO 0x04 378 #define SATA_DRIVE_PWR_MGMT 0x08 379 #define SATA_IN_ORDER_DATA 0x10 380 #define SATA_SW_STTNGS_PRS 0x40 381 uint16_t atap_sata_features_en; /* 79: */ 382 uint16_t atap_ata_major; /* 80: Major version number */ 383 #define WDC_VER_ATA1 0x0002 384 #define WDC_VER_ATA2 0x0004 385 #define WDC_VER_ATA3 0x0008 386 #define WDC_VER_ATA4 0x0010 387 #define WDC_VER_ATA5 0x0020 388 #define WDC_VER_ATA6 0x0040 389 #define WDC_VER_ATA7 0x0080 390 uint16_t atap_ata_minor; /* 81: Minor version number */ 391 uint16_t atap_cmd_set1; /* 82: command set supported */ 392 #define WDC_CMD1_NOP 0x4000 /* NOP */ 393 #define WDC_CMD1_RB 0x2000 /* READ BUFFER */ 394 #define WDC_CMD1_WB 0x1000 /* WRITE BUFFER */ 395 /* 0x0800 Obsolete */ 396 #define WDC_CMD1_HPA 0x0400 /* Host Protected Area */ 397 #define WDC_CMD1_DVRST 0x0200 /* DEVICE RESET */ 398 #define WDC_CMD1_SRV 0x0100 /* SERVICE */ 399 #define WDC_CMD1_RLSE 0x0080 /* release interrupt */ 400 #define WDC_CMD1_AHEAD 0x0040 /* look-ahead */ 401 #define WDC_CMD1_CACHE 0x0020 /* write cache */ 402 #define WDC_CMD1_PKT 0x0010 /* PACKET */ 403 #define WDC_CMD1_PM 0x0008 /* Power Management */ 404 #define WDC_CMD1_REMOV 0x0004 /* Removable Media */ 405 #define WDC_CMD1_SEC 0x0002 /* Security Mode */ 406 #define WDC_CMD1_SMART 0x0001 /* SMART */ 407 uint16_t atap_cmd_set2; /* 83: command set supported */ 408 #define ATA_CMD2_FCE 0x2000 /* FLUSH CACHE EXT */ 409 #define WDC_CMD2_FC 0x1000 /* FLUSH CACHE */ 410 #define WDC_CMD2_DCO 0x0800 /* Device Configuration Overlay */ 411 #define ATA_CMD2_LBA48 0x0400 /* 48-bit Address */ 412 #define WDC_CMD2_AAM 0x0200 /* Automatic Acoustic Management */ 413 #define WDC_CMD2_SM 0x0100 /* SET MAX security extension */ 414 #define WDC_CMD2_SFREQ 0x0040 /* SET FEATURE is required 415 to spin-up after power-up */ 416 #define WDC_CMD2_PUIS 0x0020 /* Power-Up In Standby */ 417 #define WDC_CMD2_RMSN 0x0010 /* Removable Media Status Notify */ 418 #define ATA_CMD2_APM 0x0008 /* Advanced Power Management */ 419 #define ATA_CMD2_CFA 0x0004 /* CFA */ 420 #define ATA_CMD2_RWQ 0x0002 /* READ/WRITE DMA QUEUED */ 421 #define WDC_CMD2_DM 0x0001 /* DOWNLOAD MICROCODE */ 422 uint16_t atap_cmd_ext; /* 84: command/features supp. ext. */ 423 #define ATA_CMDE_TLCONT 0x1000 /* Time-limited R/W Continuous */ 424 #define ATA_CMDE_TL 0x0800 /* Time-limited R/W */ 425 #define ATA_CMDE_URGW 0x0400 /* URG for WRITE STREAM DMA/PIO */ 426 #define ATA_CMDE_URGR 0x0200 /* URG for READ STREAM DMA/PIO */ 427 #define ATA_CMDE_WWN 0x0100 /* World Wide name */ 428 #define ATA_CMDE_WQFE 0x0080 /* WRITE DMA QUEUED FUA EXT */ 429 #define ATA_CMDE_WFE 0x0040 /* WRITE DMA/MULTIPLE FUA EXT */ 430 #define ATA_CMDE_GPL 0x0020 /* General Purpose Logging */ 431 #define ATA_CMDE_STREAM 0x0010 /* Streaming */ 432 #define ATA_CMDE_MCPTC 0x0008 /* Media Card Pass Through Cmd */ 433 #define ATA_CMDE_MS 0x0004 /* Media serial number */ 434 #define ATA_CMDE_SST 0x0002 /* SMART self-test */ 435 #define ATA_CMDE_SEL 0x0001 /* SMART error logging */ 436 uint16_t atap_cmd1_en; /* 85: cmd/features enabled */ 437 /* bits are the same as atap_cmd_set1 */ 438 uint16_t atap_cmd2_en; /* 86: cmd/features enabled */ 439 /* bits are the same as atap_cmd_set2 */ 440 uint16_t atap_cmd_def; /* 87: cmd/features default */ 441 #if BYTE_ORDER == LITTLE_ENDIAN 442 uint8_t atap_udmamode_supp; /* 88: Ultra-DMA mode supported */ 443 uint8_t atap_udmamode_act; /* Ultra-DMA mode active */ 444 #else 445 uint8_t atap_udmamode_act; /* Ultra-DMA mode active */ 446 uint8_t atap_udmamode_supp; /* 88: Ultra-DMA mode supported */ 447 #endif 448 /* 89-92 are ATA-only */ 449 uint16_t atap_seu_time; /* 89: Sec. Erase Unit compl. time */ 450 uint16_t atap_eseu_time; /* 90: Enhanced SEU compl. time */ 451 uint16_t atap_apm_val; /* 91: current APM value */ 452 uint16_t __reserved5[8]; /* 92-99: reserved */ 453 uint16_t atap_max_lba[4]; /* 100-103: Max. user LBA addr */ 454 uint16_t __reserved6[2]; /* 104-105: reserved */ 455 uint16_t atap_secsz; /* 106: physical/logical sector size */ 456 #define ATA_SECSZ_VALID_MASK 0xc000 457 #define ATA_SECSZ_VALID 0x4000 458 #define ATA_SECSZ_LPS 0x2000 /* long physical sectors */ 459 #define ATA_SECSZ_LLS 0x1000 /* long logical sectors */ 460 #define ATA_SECSZ_LPS_SZMSK 0x000f /* 2**N logical per physical */ 461 uint16_t atap_iso7779_isd; /* 107: ISO 7779 inter-seek delay */ 462 uint16_t atap_wwn[4]; /* 108-111: World Wide Name */ 463 uint16_t __reserved7[5]; /* 112-116 */ 464 uint16_t atap_lls_secsz[2]; /* 117-118: long logical sector size */ 465 uint16_t __reserved8[8]; /* 119-126 */ 466 uint16_t atap_rmsn_supp; /* 127: remov. media status notif. */ 467 #define WDC_RMSN_SUPP_MASK 0x0003 468 #define WDC_RMSN_SUPP 0x0001 469 uint16_t atap_sec_st; /* 128: security status */ 470 #define WDC_SEC_LEV_MAX 0x0100 471 #define WDC_SEC_ESE_SUPP 0x0020 472 #define WDC_SEC_EXP 0x0010 473 #define WDC_SEC_FROZEN 0x0008 474 #define WDC_SEC_LOCKED 0x0004 475 #define WDC_SEC_EN 0x0002 476 #define WDC_SEC_SUPP 0x0001 477 uint16_t __reserved9[31]; /* 129-159: vendor specific */ 478 uint16_t atap_cfa_power; /* 160: CFA powermode */ 479 #define ATA_CFA_MAX_MASK 0x0fff 480 #define ATA_CFA_MODE1_DIS 0x1000 /* CFA Mode 1 Disabled */ 481 #define ATA_CFA_MODE1_REQ 0x2000 /* CFA Mode 1 Required */ 482 #define ATA_CFA_WORD160 0x8000 /* Word 160 supported */ 483 uint16_t __reserved10[15]; /* 161-175: reserved for CFA */ 484 uint8_t atap_media_serial[60]; /* 176-205: media serial number */ 485 uint16_t __reserved11[3]; /* 206-208: */ 486 uint16_t atap_logical_align; /* 209: logical/physical alignment */ 487 #define ATA_LA_VALID_MASK 0xc000 488 #define ATA_LA_VALID 0x4000 489 #define ATA_LA_MASK 0x3fff /* offset of sector LBA 0 in PBA 0 */ 490 uint16_t __reserved12[45]; /* 210-254: */ 491 uint16_t atap_integrity; /* 255: Integrity word */ 492 #define WDC_INTEGRITY_MAGIC_MASK 0x00ff 493 #define WDC_INTEGRITY_MAGIC 0x00a5 494 }; 495 496 /* 497 * If WDSM_ATTR_ADVISORY, device exceeded intended design life period. 498 * If not WDSM_ATTR_ADVISORY, imminent data loss predicted. 499 */ 500 #define WDSM_ATTR_ADVISORY 1 501 502 /* 503 * If WDSM_ATTR_COLLECTIVE, attribute only updated in off-line testing. 504 * If not WDSM_ATTR_COLLECTIVE, attribute updated also in on-line testing. 505 */ 506 #define WDSM_ATTR_COLLECTIVE 2 507 508 /* 509 * ATA SMART attributes 510 */ 511 512 struct ata_smart_attr { 513 uint8_t id; /* attribute id number */ 514 uint16_t flags; 515 uint8_t value; /* attribute value */ 516 uint8_t worst; 517 uint8_t raw[6]; 518 uint8_t reserved; 519 } __packed; 520 521 struct ata_smart_attributes { 522 uint16_t data_structure_revision; 523 struct ata_smart_attr attributes[30]; 524 uint8_t offline_data_collection_status; 525 uint8_t self_test_exec_status; 526 uint16_t total_time_to_complete_off_line; 527 uint8_t vendor_specific_366; 528 uint8_t offline_data_collection_capability; 529 uint16_t smart_capability; 530 uint8_t errorlog_capability; 531 uint8_t vendor_specific_371; 532 uint8_t short_test_completion_time; 533 uint8_t extend_test_completion_time; 534 uint8_t reserved_374_385[12]; 535 uint8_t vendor_specific_386_509[125]; 536 int8_t checksum; 537 } __packed; 538 539 struct ata_smart_thresh { 540 uint8_t id; 541 uint8_t value; 542 uint8_t reserved[10]; 543 } __packed; 544 545 struct ata_smart_thresholds { 546 uint16_t data_structure_revision; 547 struct ata_smart_thresh thresholds[30]; 548 uint8_t reserved[18]; 549 uint8_t vendor_specific[131]; 550 int8_t checksum; 551 } __packed; 552 553 struct ata_smart_selftest { 554 uint8_t number; 555 uint8_t status; 556 uint16_t time_stamp; 557 uint8_t failure_check_point; 558 uint32_t lba_first_error; 559 uint8_t vendor_specific[15]; 560 } __packed; 561 562 struct ata_smart_selftestlog { 563 uint16_t data_structure_revision; 564 struct ata_smart_selftest log_entries[21]; 565 uint8_t vendorspecific[2]; 566 uint8_t mostrecenttest; 567 uint8_t reserved[2]; 568 uint8_t checksum; 569 } __packed; 570 571 #endif /* _DEV_ATA_ATAREG_H_ */ 572