1 /* $NetBSD: ata_raid_jmicron.c,v 1.5 2014/03/25 16:19:13 christos Exp $ */ 2 3 /*- 4 * Copyright (c) 2000-2008 S�ren Schmidt <sos@FreeBSD.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. The name of the author may not be used to endorse or promote products 17 * derived from this software without specific prior written permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 20 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 21 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 22 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 23 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 24 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 25 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 26 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 27 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 28 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31 /* 32 * Support for parsing JMicron Technology RAID controller configuration blocks. 33 * 34 * Adapted to NetBSD by Juan Romero Pardines (xtraeme@gmail.org). 35 */ 36 37 #include <sys/cdefs.h> 38 __KERNEL_RCSID(0, "$NetBSD: ata_raid_jmicron.c,v 1.5 2014/03/25 16:19:13 christos Exp $"); 39 40 #include <sys/param.h> 41 #include <sys/buf.h> 42 #include <sys/bufq.h> 43 #include <sys/conf.h> 44 #include <sys/device.h> 45 #include <sys/disk.h> 46 #include <sys/disklabel.h> 47 #include <sys/fcntl.h> 48 #include <sys/malloc.h> 49 #include <sys/vnode.h> 50 #include <sys/kauth.h> 51 52 #include <miscfs/specfs/specdev.h> 53 54 #include <dev/ata/atareg.h> 55 #include <dev/ata/atavar.h> 56 #include <dev/ata/wdvar.h> 57 58 #include <dev/ata/ata_raidreg.h> 59 #include <dev/ata/ata_raidvar.h> 60 61 #ifdef ATA_RAID_DEBUG 62 #define DPRINTF(x) printf x 63 #else 64 #define DPRINTF(x) /* nothing */ 65 #endif 66 67 #ifdef ATA_RAID_DEBUG 68 static const char * 69 ata_raid_jmicron_type(int type) 70 { 71 static char buffer[16]; 72 73 switch (type) { 74 case JM_T_RAID0: 75 return "RAID0"; 76 case JM_T_RAID1: 77 return "RAID1"; 78 case JM_T_RAID01: 79 return "RAID0+1"; 80 case JM_T_RAID5: 81 return "RAID5"; 82 case JM_T_JBOD: 83 return "JBOD"; 84 default: 85 snprintf(buffer, sizeof(buffer), "UNKNOWN 0x%02x", type); 86 return buffer; 87 } 88 } 89 90 static void 91 ata_raid_jmicron_print_info(struct jmicron_raid_conf *info) 92 { 93 int i; 94 95 printf("****** ATA JMicron Technology Corp Metadata ******\n"); 96 printf("signature %.2s\n", info->signature); 97 printf("version 0x%04x\n", info->version); 98 printf("checksum 0x%04x\n", info->checksum); 99 printf("disk_id 0x%08x\n", info->disk_id); 100 printf("offset 0x%08x\n", info->offset); 101 printf("disk_sectors_low 0x%08x\n", info->disk_sectors_low); 102 printf("disk_sectors_high 0x%08x\n", info->disk_sectors_high); 103 printf("name %.16s\n", info->name); 104 printf("type %s\n", 105 ata_raid_jmicron_type(info->type)); 106 printf("stripe_shift %d\n", info->stripe_shift); 107 printf("flags 0x%04x\n", info->flags); 108 printf("spare:\n"); 109 for (i = 0; i < 2 && info->spare[i]; i++) 110 printf(" %d 0x%08x\n", i, info->spare[i]); 111 printf("disks:\n"); 112 for (i = 0; i < 8 && info->disks[i]; i++) 113 printf(" %d 0x%08x\n", i, info->disks[i]); 114 printf("=================================================\n"); 115 } 116 #endif 117 118 int 119 ata_raid_read_config_jmicron(struct wd_softc *sc) 120 { 121 struct atabus_softc *atabus; 122 struct jmicron_raid_conf *info; 123 struct vnode *vp; 124 struct ataraid_array_info *aai; 125 struct ataraid_disk_info *adi; 126 uint64_t disk_size; 127 uint32_t drive; 128 uint16_t checksum, *ptr; 129 int bmajor, error, count, disk, total_disks; 130 dev_t dev; 131 132 info = malloc(sizeof(*info), M_DEVBUF, M_WAITOK|M_ZERO); 133 134 bmajor = devsw_name2blk(device_xname(sc->sc_dev), NULL, 0); 135 136 /* Get a vnode for the raw partition of this disk. */ 137 dev = MAKEDISKDEV(bmajor, device_unit(sc->sc_dev), RAW_PART); 138 error = bdevvp(dev, &vp); 139 if (error) 140 goto out; 141 142 error = VOP_OPEN(vp, FREAD, NOCRED); 143 if (error) { 144 vput(vp); 145 goto out; 146 } 147 148 error = ata_raid_config_block_rw(vp, JMICRON_LBA(sc), info, 149 sizeof(*info), B_READ); 150 VOP_CLOSE(vp, FREAD, NOCRED); 151 vput(vp); 152 if (error) { 153 DPRINTF(("%s: error %d reading JMicron config block\n", 154 device_xname(sc->sc_dev), error)); 155 goto out; 156 } 157 158 /* Check for JMicron signature. */ 159 if (strncmp(info->signature, JMICRON_MAGIC, 2)) { 160 DPRINTF(("%s: JMicron RAID signature check failed\n", 161 device_xname(sc->sc_dev))); 162 error = ESRCH; 163 goto out; 164 } 165 166 /* calculate checksum and compare for valid */ 167 for (checksum = 0, ptr = (uint16_t *)info, count = 0; 168 count < 64; count++) 169 checksum += *ptr++; 170 if (checksum) { 171 DPRINTF(("%s: JMicron checksum failed\n", 172 device_xname(sc->sc_dev))); 173 error = ESRCH; 174 goto out; 175 } 176 177 #ifdef ATA_RAID_DEBUG 178 ata_raid_jmicron_print_info(info); 179 #endif 180 /* 181 * Check that there aren't stale config blocks without 182 * any array set configured. 183 */ 184 for (total_disks = 0, disk = 0; disk < JM_MAX_DISKS; disk++) 185 if (info->disks[disk] == info->disk_id) 186 total_disks++; 187 if (total_disks <= 1) { 188 error = EINVAL; 189 goto out; 190 } 191 192 /* 193 * Check volume's state and bail out if it's not acceptable. 194 */ 195 if ((info->flags & (JM_F_READY|JM_F_BOOTABLE|JM_F_ACTIVE)) == 0) { 196 error = EINVAL; 197 goto out; 198 } 199 200 /* 201 * Lookup or allocate a new array info structure for 202 * this array. 203 */ 204 aai = ata_raid_get_array_info(ATA_RAID_TYPE_JMICRON, 0); 205 aai->aai_status = AAI_S_READY; 206 207 switch (info->type) { 208 case JM_T_RAID0: 209 aai->aai_level = AAI_L_RAID0; 210 aai->aai_width = total_disks; 211 break; 212 case JM_T_RAID1: 213 aai->aai_level = AAI_L_RAID1; 214 aai->aai_width = 1; 215 break; 216 case JM_T_RAID01: 217 aai->aai_level = AAI_L_RAID0 | AAI_L_RAID1; 218 aai->aai_width = total_disks / 2; 219 break; 220 case JM_T_JBOD: 221 aai->aai_level = AAI_L_SPAN; 222 aai->aai_width = total_disks; 223 break; 224 default: 225 DPRINTF(("%s: unknown JMicron RAID type 0x%02x\n", 226 device_xname(sc->sc_dev), info->type)); 227 error = EINVAL; 228 goto out; 229 } 230 231 disk_size = (info->disk_sectors_high << 16) + info->disk_sectors_low; 232 aai->aai_type = ATA_RAID_TYPE_JMICRON; 233 aai->aai_generation = 0; 234 aai->aai_capacity = disk_size * aai->aai_width; 235 aai->aai_interleave = 2 << info->stripe_shift; 236 aai->aai_ndisks = total_disks; 237 aai->aai_heads = 255; 238 aai->aai_sectors = 63; 239 aai->aai_cylinders = 240 aai->aai_capacity / (aai->aai_heads * aai->aai_sectors); 241 aai->aai_offset = info->offset * 16; 242 aai->aai_reserved = 2; 243 if (info->name) 244 strlcpy(aai->aai_name, info->name, sizeof(aai->aai_name)); 245 246 atabus = device_private(device_parent(sc->sc_dev)); 247 drive = atabus->sc_chan->ch_channel; 248 if (drive >= aai->aai_ndisks) { 249 DPRINTF(("%s: drive number %d doesn't make sense within " 250 "%d-disk array\n", device_xname(sc->sc_dev), 251 drive, aai->aai_ndisks)); 252 error = EINVAL; 253 goto out; 254 } 255 256 if (info->disks[drive] == info->disk_id) { 257 adi = &aai->aai_disks[drive]; 258 adi->adi_dev = sc->sc_dev; 259 adi->adi_status = ADI_S_ONLINE | ADI_S_ASSIGNED; 260 adi->adi_sectors = aai->aai_capacity; 261 adi->adi_compsize = disk_size - aai->aai_reserved; 262 } 263 264 error = 0; 265 266 out: 267 free(info, M_DEVBUF); 268 return error; 269 } 270