1 /* $NetBSD: ichlpcib.c,v 1.14 2008/10/13 15:10:51 joerg Exp $ */ 2 3 /*- 4 * Copyright (c) 2004 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Minoura Makoto and Matthew R. Green. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * Intel I/O Controller Hub (ICHn) LPC Interface Bridge driver 34 * 35 * LPC Interface Bridge is basically a pcib (PCI-ISA Bridge), but has 36 * some power management and monitoring functions. 37 * Currently we support the watchdog timer, SpeedStep (on some systems) 38 * and the power management timer. 39 */ 40 41 #include <sys/cdefs.h> 42 __KERNEL_RCSID(0, "$NetBSD: ichlpcib.c,v 1.14 2008/10/13 15:10:51 joerg Exp $"); 43 44 #include <sys/types.h> 45 #include <sys/param.h> 46 #include <sys/systm.h> 47 #include <sys/device.h> 48 #include <sys/sysctl.h> 49 #include <sys/timetc.h> 50 #include <machine/bus.h> 51 52 #include <dev/pci/pcivar.h> 53 #include <dev/pci/pcireg.h> 54 #include <dev/pci/pcidevs.h> 55 56 #include <dev/sysmon/sysmonvar.h> 57 58 #include <dev/ic/acpipmtimer.h> 59 #include <dev/ic/i82801lpcreg.h> 60 #include <dev/ic/hpetreg.h> 61 #include <dev/ic/hpetvar.h> 62 63 #include "hpet.h" 64 #include "pcibvar.h" 65 66 struct lpcib_softc { 67 /* we call pcibattach() which assumes this starts like this: */ 68 struct pcib_softc sc_pcib; 69 70 struct pci_attach_args sc_pa; 71 int sc_has_rcba; 72 int sc_has_ich5_hpet; 73 74 /* RCBA */ 75 bus_space_tag_t sc_rcbat; 76 bus_space_handle_t sc_rcbah; 77 pcireg_t sc_rcba_reg; 78 79 /* Watchdog variables. */ 80 struct sysmon_wdog sc_smw; 81 bus_space_tag_t sc_iot; 82 bus_space_handle_t sc_ioh; 83 84 #if NHPET > 0 85 /* HPET variables. */ 86 uint32_t sc_hpet_reg; 87 #endif 88 89 /* Power management */ 90 pcireg_t sc_pirq[2]; 91 pcireg_t sc_pmcon; 92 pcireg_t sc_fwhsel2; 93 }; 94 95 static int lpcibmatch(device_t, cfdata_t, void *); 96 static void lpcibattach(device_t, device_t, void *); 97 static bool lpcib_suspend(device_t PMF_FN_PROTO); 98 static bool lpcib_resume(device_t PMF_FN_PROTO); 99 100 static void pmtimer_configure(device_t); 101 102 static void tcotimer_configure(device_t); 103 static int tcotimer_setmode(struct sysmon_wdog *); 104 static int tcotimer_tickle(struct sysmon_wdog *); 105 static void tcotimer_stop(struct lpcib_softc *); 106 static void tcotimer_start(struct lpcib_softc *); 107 static void tcotimer_status_reset(struct lpcib_softc *); 108 static int tcotimer_disable_noreboot(device_t); 109 110 static void speedstep_configure(device_t); 111 static int speedstep_sysctl_helper(SYSCTLFN_ARGS); 112 113 #if NHPET > 0 114 static void lpcib_hpet_configure(device_t); 115 #endif 116 117 struct lpcib_softc *speedstep_cookie; /* XXX */ 118 119 CFATTACH_DECL_NEW(ichlpcib, sizeof(struct lpcib_softc), 120 lpcibmatch, lpcibattach, NULL, NULL); 121 122 static struct lpcib_device { 123 pcireg_t vendor, product; 124 int has_rcba; 125 int has_ich5_hpet; 126 } lpcib_devices[] = { 127 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801AA_LPC, 0, 0 }, 128 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801BA_LPC, 0, 0 }, 129 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801BAM_LPC, 0, 0 }, 130 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801CA_LPC, 0, 0 }, 131 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801CAM_LPC, 0, 0 }, 132 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801DB_LPC, 0, 0 }, 133 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801DB_ISA, 0, 0 }, 134 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801EB_LPC, 0, 1 }, 135 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801FB_LPC, 1, 0 }, 136 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801FBM_LPC, 1, 0 }, 137 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801G_LPC, 1, 0 }, 138 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801GBM_LPC, 1, 0 }, 139 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801GHM_LPC, 1, 0 }, 140 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801H_LPC, 1, 0 }, 141 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HEM_LPC, 1, 0 }, 142 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HH_LPC, 1, 0 }, 143 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HO_LPC, 1, 0 }, 144 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HBM_LPC, 1, 0 }, 145 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801IH_LPC, 1, 0 }, 146 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801IO_LPC, 1, 0 }, 147 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801IR_LPC, 1, 0 }, 148 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801IB_LPC, 1, 0 }, 149 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_63XXESB_LPC, 1, 0 }, 150 151 { 0, 0, 0, 0 }, 152 }; 153 154 /* 155 * Autoconf callbacks. 156 */ 157 static int 158 lpcibmatch(device_t parent, cfdata_t match, void *aux) 159 { 160 struct pci_attach_args *pa = aux; 161 struct lpcib_device *lpcib_dev; 162 163 /* We are ISA bridge, of course */ 164 if (PCI_CLASS(pa->pa_class) != PCI_CLASS_BRIDGE || 165 PCI_SUBCLASS(pa->pa_class) != PCI_SUBCLASS_BRIDGE_ISA) 166 return 0; 167 168 for (lpcib_dev = lpcib_devices; lpcib_dev->vendor; ++lpcib_dev) { 169 if (PCI_VENDOR(pa->pa_id) == lpcib_dev->vendor && 170 PCI_PRODUCT(pa->pa_id) == lpcib_dev->product) 171 return 10; 172 } 173 174 return 0; 175 } 176 177 static void 178 lpcibattach(device_t parent, device_t self, void *aux) 179 { 180 struct pci_attach_args *pa = aux; 181 struct lpcib_softc *sc = device_private(self); 182 struct lpcib_device *lpcib_dev; 183 184 sc->sc_pa = *pa; 185 186 for (lpcib_dev = lpcib_devices; lpcib_dev->vendor; ++lpcib_dev) { 187 if (PCI_VENDOR(pa->pa_id) != lpcib_dev->vendor || 188 PCI_PRODUCT(pa->pa_id) != lpcib_dev->product) 189 continue; 190 sc->sc_has_rcba = lpcib_dev->has_rcba; 191 sc->sc_has_ich5_hpet = lpcib_dev->has_ich5_hpet; 192 break; 193 } 194 195 pcibattach(parent, self, aux); 196 197 /* 198 * Part of our I/O registers are used as ACPI PM regs. 199 * Since our ACPI subsystem accesses the I/O space directly so far, 200 * we do not have to bother bus_space I/O map confliction. 201 */ 202 if (pci_mapreg_map(pa, LPCIB_PCI_PMBASE, PCI_MAPREG_TYPE_IO, 0, 203 &sc->sc_iot, &sc->sc_ioh, NULL, NULL)) { 204 aprint_error_dev(self, "can't map power management i/o space"); 205 return; 206 } 207 208 /* For ICH6 and later, always enable RCBA */ 209 if (sc->sc_has_rcba) { 210 pcireg_t rcba; 211 212 sc->sc_rcbat = sc->sc_pa.pa_memt; 213 214 rcba = pci_conf_read(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag, 215 LPCIB_RCBA); 216 if ((rcba & LPCIB_RCBA_EN) == 0) { 217 aprint_error_dev(self, "RCBA is not enabled"); 218 return; 219 } 220 rcba &= ~LPCIB_RCBA_EN; 221 222 if (bus_space_map(sc->sc_rcbat, rcba, LPCIB_RCBA_SIZE, 0, 223 &sc->sc_rcbah)) { 224 aprint_error_dev(self, "RCBA could not be mapped"); 225 return; 226 } 227 } 228 229 /* Set up the power management timer. */ 230 pmtimer_configure(self); 231 232 /* Set up the TCO (watchdog). */ 233 tcotimer_configure(self); 234 235 /* Set up SpeedStep. */ 236 speedstep_configure(self); 237 238 #if NHPET > 0 239 /* Set up HPET. */ 240 lpcib_hpet_configure(self); 241 #endif 242 243 /* Install power handler */ 244 if (!pmf_device_register(self, lpcib_suspend, lpcib_resume)) 245 aprint_error_dev(self, "couldn't establish power handler\n"); 246 } 247 248 static bool 249 lpcib_suspend(device_t dv PMF_FN_ARGS) 250 { 251 struct lpcib_softc *sc = device_private(dv); 252 pci_chipset_tag_t pc = sc->sc_pcib.sc_pc; 253 pcitag_t tag = sc->sc_pcib.sc_tag; 254 255 /* capture PIRQ routing control registers */ 256 sc->sc_pirq[0] = pci_conf_read(pc, tag, LPCIB_PCI_PIRQA_ROUT); 257 sc->sc_pirq[1] = pci_conf_read(pc, tag, LPCIB_PCI_PIRQE_ROUT); 258 259 sc->sc_pmcon = pci_conf_read(pc, tag, LPCIB_PCI_GEN_PMCON_1); 260 sc->sc_fwhsel2 = pci_conf_read(pc, tag, LPCIB_PCI_GEN_STA); 261 262 if (sc->sc_has_rcba) { 263 sc->sc_rcba_reg = pci_conf_read(pc, tag, LPCIB_RCBA); 264 #if NHPET > 0 265 sc->sc_hpet_reg = bus_space_read_4(sc->sc_rcbat, sc->sc_rcbah, 266 LPCIB_RCBA_HPTC); 267 #endif 268 } else if (sc->sc_has_ich5_hpet) { 269 #if NHPET > 0 270 sc->sc_hpet_reg = pci_conf_read(pc, tag, LPCIB_PCI_GEN_CNTL); 271 #endif 272 } 273 274 return true; 275 } 276 277 static bool 278 lpcib_resume(device_t dv PMF_FN_ARGS) 279 { 280 struct lpcib_softc *sc = device_private(dv); 281 pci_chipset_tag_t pc = sc->sc_pcib.sc_pc; 282 pcitag_t tag = sc->sc_pcib.sc_tag; 283 284 /* restore PIRQ routing control registers */ 285 pci_conf_write(pc, tag, LPCIB_PCI_PIRQA_ROUT, sc->sc_pirq[0]); 286 pci_conf_write(pc, tag, LPCIB_PCI_PIRQE_ROUT, sc->sc_pirq[1]); 287 288 pci_conf_write(pc, tag, LPCIB_PCI_GEN_PMCON_1, sc->sc_pmcon); 289 pci_conf_write(pc, tag, LPCIB_PCI_GEN_STA, sc->sc_fwhsel2); 290 291 if (sc->sc_has_rcba) { 292 pci_conf_write(pc, tag, LPCIB_RCBA, sc->sc_rcba_reg); 293 #if NHPET > 0 294 bus_space_write_4(sc->sc_rcbat, sc->sc_rcbah, LPCIB_RCBA_HPTC, 295 sc->sc_hpet_reg); 296 #endif 297 } else if (sc->sc_has_ich5_hpet) { 298 #if NHPET > 0 299 pci_conf_write(pc, tag, LPCIB_PCI_GEN_CNTL, sc->sc_hpet_reg); 300 #endif 301 } 302 303 return true; 304 } 305 306 /* 307 * Initialize the power management timer. 308 */ 309 static void 310 pmtimer_configure(device_t self) 311 { 312 struct lpcib_softc *sc = device_private(self); 313 pcireg_t control; 314 315 /* 316 * Check if power management I/O space is enabled and enable the ACPI_EN 317 * bit if it's disabled. 318 */ 319 control = pci_conf_read(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag, 320 LPCIB_PCI_ACPI_CNTL); 321 if ((control & LPCIB_PCI_ACPI_CNTL_EN) == 0) { 322 control |= LPCIB_PCI_ACPI_CNTL_EN; 323 pci_conf_write(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag, 324 LPCIB_PCI_ACPI_CNTL, control); 325 } 326 327 /* Attach our PM timer with the generic acpipmtimer function */ 328 acpipmtimer_attach(self, sc->sc_iot, sc->sc_ioh, 329 LPCIB_PM1_TMR, 0); 330 } 331 332 /* 333 * Initialize the watchdog timer. 334 */ 335 static void 336 tcotimer_configure(device_t self) 337 { 338 struct lpcib_softc *sc = device_private(self); 339 uint32_t ioreg; 340 unsigned int period; 341 342 /* Explicitly stop the TCO timer. */ 343 tcotimer_stop(sc); 344 345 /* 346 * Enable TCO timeout SMI only if the hardware reset does not 347 * work. We don't know what the SMBIOS does. 348 */ 349 ioreg = bus_space_read_4(sc->sc_iot, sc->sc_ioh, LPCIB_SMI_EN); 350 ioreg &= ~LPCIB_SMI_EN_TCO_EN; 351 352 /* 353 * Clear the No Reboot (NR) bit. If this fails, enabling the TCO_EN bit 354 * in the SMI_EN register is the last chance. 355 */ 356 if (tcotimer_disable_noreboot(self)) { 357 ioreg |= LPCIB_SMI_EN_TCO_EN; 358 } 359 if ((ioreg & LPCIB_SMI_EN_GBL_SMI_EN) != 0) { 360 bus_space_write_4(sc->sc_iot, sc->sc_ioh, LPCIB_SMI_EN, ioreg); 361 } 362 363 /* Reset the watchdog status registers. */ 364 tcotimer_status_reset(sc); 365 366 /* 367 * Register the driver with the sysmon watchdog framework. 368 */ 369 sc->sc_smw.smw_name = device_xname(self); 370 sc->sc_smw.smw_cookie = sc; 371 sc->sc_smw.smw_setmode = tcotimer_setmode; 372 sc->sc_smw.smw_tickle = tcotimer_tickle; 373 if (sc->sc_has_rcba) 374 period = LPCIB_TCOTIMER2_MAX_TICK; 375 else 376 period = LPCIB_TCOTIMER_MAX_TICK; 377 sc->sc_smw.smw_period = lpcib_tcotimer_tick_to_second(period); 378 379 if (sysmon_wdog_register(&sc->sc_smw)) { 380 aprint_error_dev(self, "unable to register TCO timer" 381 "as a sysmon watchdog device.\n"); 382 return; 383 } 384 385 aprint_verbose_dev(self, "TCO (watchdog) timer configured.\n"); 386 } 387 388 /* 389 * Sysmon watchdog callbacks. 390 */ 391 static int 392 tcotimer_setmode(struct sysmon_wdog *smw) 393 { 394 struct lpcib_softc *sc = smw->smw_cookie; 395 unsigned int period; 396 uint16_t ich6period = 0; 397 398 if ((smw->smw_mode & WDOG_MODE_MASK) == WDOG_MODE_DISARMED) { 399 /* Stop the TCO timer. */ 400 tcotimer_stop(sc); 401 } else { 402 /* 403 * ICH6 or newer are limited to 2s min and 613s max. 404 * ICH5 or older are limited to 4s min and 39s max. 405 */ 406 if (sc->sc_has_rcba) { 407 if (smw->smw_period < LPCIB_TCOTIMER2_MIN_TICK || 408 smw->smw_period > LPCIB_TCOTIMER2_MAX_TICK) 409 return EINVAL; 410 } else { 411 if (smw->smw_period < LPCIB_TCOTIMER_MIN_TICK || 412 smw->smw_period > LPCIB_TCOTIMER_MAX_TICK) 413 return EINVAL; 414 } 415 period = lpcib_tcotimer_second_to_tick(smw->smw_period); 416 417 /* Stop the TCO timer, */ 418 tcotimer_stop(sc); 419 420 /* set the timeout, */ 421 if (sc->sc_has_rcba) { 422 /* ICH6 or newer */ 423 ich6period = bus_space_read_2(sc->sc_iot, sc->sc_ioh, 424 LPCIB_TCO_TMR2); 425 ich6period &= 0xfc00; 426 bus_space_write_2(sc->sc_iot, sc->sc_ioh, 427 LPCIB_TCO_TMR2, ich6period | period); 428 } else { 429 /* ICH5 or older */ 430 period |= bus_space_read_1(sc->sc_iot, sc->sc_ioh, 431 LPCIB_TCO_TMR); 432 period &= 0xc0; 433 bus_space_write_1(sc->sc_iot, sc->sc_ioh, 434 LPCIB_TCO_TMR, period); 435 } 436 437 /* and start/reload the timer. */ 438 tcotimer_start(sc); 439 tcotimer_tickle(smw); 440 } 441 442 return 0; 443 } 444 445 static int 446 tcotimer_tickle(struct sysmon_wdog *smw) 447 { 448 struct lpcib_softc *sc = smw->smw_cookie; 449 450 /* any value is allowed */ 451 if (sc->sc_has_rcba) 452 bus_space_write_2(sc->sc_iot, sc->sc_ioh, LPCIB_TCO_RLD, 1); 453 else 454 bus_space_write_1(sc->sc_iot, sc->sc_ioh, LPCIB_TCO_RLD, 1); 455 456 return 0; 457 } 458 459 static void 460 tcotimer_stop(struct lpcib_softc *sc) 461 { 462 uint16_t ioreg; 463 464 ioreg = bus_space_read_2(sc->sc_iot, sc->sc_ioh, LPCIB_TCO1_CNT); 465 ioreg |= LPCIB_TCO1_CNT_TCO_TMR_HLT; 466 bus_space_write_2(sc->sc_iot, sc->sc_ioh, LPCIB_TCO1_CNT, ioreg); 467 } 468 469 static void 470 tcotimer_start(struct lpcib_softc *sc) 471 { 472 uint16_t ioreg; 473 474 ioreg = bus_space_read_2(sc->sc_iot, sc->sc_ioh, LPCIB_TCO1_CNT); 475 ioreg &= ~LPCIB_TCO1_CNT_TCO_TMR_HLT; 476 bus_space_write_2(sc->sc_iot, sc->sc_ioh, LPCIB_TCO1_CNT, ioreg); 477 } 478 479 static void 480 tcotimer_status_reset(struct lpcib_softc *sc) 481 { 482 bus_space_write_2(sc->sc_iot, sc->sc_ioh, LPCIB_TCO1_STS, 483 LPCIB_TCO1_STS_TIMEOUT); 484 bus_space_write_2(sc->sc_iot, sc->sc_ioh, LPCIB_TCO2_STS, 485 LPCIB_TCO2_STS_BOOT_STS); 486 bus_space_write_2(sc->sc_iot, sc->sc_ioh, LPCIB_TCO2_STS, 487 LPCIB_TCO2_STS_SECONDS_TO_STS); 488 } 489 490 /* 491 * Clear the No Reboot (NR) bit, this enables reboots when the timer 492 * reaches the timeout for the second time. 493 */ 494 static int 495 tcotimer_disable_noreboot(device_t self) 496 { 497 struct lpcib_softc *sc = device_private(self); 498 499 if (sc->sc_has_rcba) { 500 uint32_t status; 501 502 status = bus_space_read_4(sc->sc_rcbat, sc->sc_rcbah, 503 LPCIB_GCS_OFFSET); 504 status &= ~LPCIB_GCS_NO_REBOOT; 505 bus_space_write_4(sc->sc_rcbat, sc->sc_rcbah, 506 LPCIB_GCS_OFFSET, status); 507 status = bus_space_read_4(sc->sc_rcbat, sc->sc_rcbah, 508 LPCIB_GCS_OFFSET); 509 if (status & LPCIB_GCS_NO_REBOOT) 510 goto error; 511 } else { 512 pcireg_t pcireg; 513 514 pcireg = pci_conf_read(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag, 515 LPCIB_PCI_GEN_STA); 516 if (pcireg & LPCIB_PCI_GEN_STA_NO_REBOOT) { 517 /* TCO timeout reset is disabled; try to enable it */ 518 pcireg &= ~LPCIB_PCI_GEN_STA_NO_REBOOT; 519 pci_conf_write(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag, 520 LPCIB_PCI_GEN_STA, pcireg); 521 if (pcireg & LPCIB_PCI_GEN_STA_NO_REBOOT) 522 goto error; 523 } 524 } 525 526 return 0; 527 error: 528 aprint_error_dev(self, "TCO timer reboot disabled by hardware; " 529 "hope SMBIOS properly handles it.\n"); 530 return EINVAL; 531 } 532 533 534 /* 535 * Intel ICH SpeedStep support. 536 */ 537 #define SS_READ(sc, reg) \ 538 bus_space_read_1((sc)->sc_iot, (sc)->sc_ioh, (reg)) 539 #define SS_WRITE(sc, reg, val) \ 540 bus_space_write_1((sc)->sc_iot, (sc)->sc_ioh, (reg), (val)) 541 542 /* 543 * Linux driver says that SpeedStep on older chipsets cause 544 * lockups on Dell Inspiron 8000 and 8100. 545 */ 546 static int 547 speedstep_bad_hb_check(struct pci_attach_args *pa) 548 { 549 550 if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_INTEL_82815_FULL_HUB && 551 PCI_REVISION(pa->pa_class) < 5) 552 return 1; 553 554 return 0; 555 } 556 557 static void 558 speedstep_configure(device_t self) 559 { 560 struct lpcib_softc *sc = device_private(self); 561 const struct sysctlnode *node, *ssnode; 562 int rv; 563 564 /* Supported on ICH2-M, ICH3-M and ICH4-M. */ 565 if (PCI_PRODUCT(sc->sc_pa.pa_id) == PCI_PRODUCT_INTEL_82801DB_ISA || 566 PCI_PRODUCT(sc->sc_pa.pa_id) == PCI_PRODUCT_INTEL_82801CAM_LPC || 567 (PCI_PRODUCT(sc->sc_pa.pa_id) == PCI_PRODUCT_INTEL_82801BAM_LPC && 568 pci_find_device(&sc->sc_pa, speedstep_bad_hb_check) == 0)) { 569 uint8_t pmcon; 570 571 /* Enable SpeedStep if it isn't already enabled. */ 572 pmcon = pci_conf_read(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag, 573 LPCIB_PCI_GEN_PMCON_1); 574 if ((pmcon & LPCIB_PCI_GEN_PMCON_1_SS_EN) == 0) 575 pci_conf_write(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag, 576 LPCIB_PCI_GEN_PMCON_1, 577 pmcon | LPCIB_PCI_GEN_PMCON_1_SS_EN); 578 579 /* Put in machdep.speedstep_state (0 for low, 1 for high). */ 580 if ((rv = sysctl_createv(NULL, 0, NULL, &node, 581 CTLFLAG_PERMANENT, CTLTYPE_NODE, "machdep", NULL, 582 NULL, 0, NULL, 0, CTL_MACHDEP, CTL_EOL)) != 0) 583 goto err; 584 585 /* CTLFLAG_ANYWRITE? kernel option like EST? */ 586 if ((rv = sysctl_createv(NULL, 0, &node, &ssnode, 587 CTLFLAG_READWRITE, CTLTYPE_INT, "speedstep_state", NULL, 588 speedstep_sysctl_helper, 0, NULL, 0, CTL_CREATE, 589 CTL_EOL)) != 0) 590 goto err; 591 592 /* XXX save the sc for IO tag/handle */ 593 speedstep_cookie = sc; 594 aprint_verbose_dev(self, "SpeedStep enabled\n"); 595 } 596 597 return; 598 599 err: 600 aprint_normal("%s: sysctl_createv failed (rv = %d)\n", __func__, rv); 601 } 602 603 /* 604 * get/set the SpeedStep state: 0 == low power, 1 == high power. 605 */ 606 static int 607 speedstep_sysctl_helper(SYSCTLFN_ARGS) 608 { 609 struct sysctlnode node; 610 struct lpcib_softc *sc = speedstep_cookie; 611 uint8_t state, state2; 612 int ostate, nstate, s, error = 0; 613 614 /* 615 * We do the dance with spl's to avoid being at high ipl during 616 * sysctl_lookup() which can both copyin and copyout. 617 */ 618 s = splserial(); 619 state = SS_READ(sc, LPCIB_PM_SS_CNTL); 620 splx(s); 621 if ((state & LPCIB_PM_SS_STATE_LOW) == 0) 622 ostate = 1; 623 else 624 ostate = 0; 625 nstate = ostate; 626 627 node = *rnode; 628 node.sysctl_data = &nstate; 629 630 error = sysctl_lookup(SYSCTLFN_CALL(&node)); 631 if (error || newp == NULL) 632 goto out; 633 634 /* Only two states are available */ 635 if (nstate != 0 && nstate != 1) { 636 error = EINVAL; 637 goto out; 638 } 639 640 s = splserial(); 641 state2 = SS_READ(sc, LPCIB_PM_SS_CNTL); 642 if ((state2 & LPCIB_PM_SS_STATE_LOW) == 0) 643 ostate = 1; 644 else 645 ostate = 0; 646 647 if (ostate != nstate) { 648 uint8_t cntl; 649 650 if (nstate == 0) 651 state2 |= LPCIB_PM_SS_STATE_LOW; 652 else 653 state2 &= ~LPCIB_PM_SS_STATE_LOW; 654 655 /* 656 * Must disable bus master arbitration during the change. 657 */ 658 cntl = SS_READ(sc, LPCIB_PM_CTRL); 659 SS_WRITE(sc, LPCIB_PM_CTRL, cntl | LPCIB_PM_SS_CNTL_ARB_DIS); 660 SS_WRITE(sc, LPCIB_PM_SS_CNTL, state2); 661 SS_WRITE(sc, LPCIB_PM_CTRL, cntl); 662 } 663 splx(s); 664 out: 665 return error; 666 } 667 668 #if NHPET > 0 669 struct lpcib_hpet_attach_arg { 670 bus_space_tag_t hpet_mem_t; 671 uint32_t hpet_reg; 672 }; 673 674 static int 675 lpcib_hpet_match(device_t parent, cfdata_t match, void *aux) 676 { 677 struct lpcib_hpet_attach_arg *arg = aux; 678 bus_space_tag_t tag; 679 bus_space_handle_t handle; 680 681 tag = arg->hpet_mem_t; 682 683 if (bus_space_map(tag, arg->hpet_reg, HPET_WINDOW_SIZE, 0, &handle)) { 684 aprint_verbose_dev(parent, "HPET window not mapped, skipping\n"); 685 return 0; 686 } 687 bus_space_unmap(tag, handle, HPET_WINDOW_SIZE); 688 689 return 1; 690 } 691 692 static void 693 lpcib_hpet_attach(device_t parent, device_t self, void *aux) 694 { 695 struct hpet_softc *sc = device_private(self); 696 struct lpcib_hpet_attach_arg *arg = aux; 697 698 aprint_naive("\n"); 699 aprint_normal("\n"); 700 701 sc->sc_memt = arg->hpet_mem_t; 702 703 if (bus_space_map(sc->sc_memt, arg->hpet_reg, HPET_WINDOW_SIZE, 0, 704 &sc->sc_memh)) { 705 aprint_error_dev(self, 706 "HPET memory window could not be mapped"); 707 return; 708 } 709 710 hpet_attach_subr(self); 711 } 712 713 CFATTACH_DECL_NEW(ichlpcib_hpet, sizeof(struct hpet_softc), lpcib_hpet_match, 714 lpcib_hpet_attach, NULL, NULL); 715 716 static void 717 lpcib_hpet_configure(device_t self) 718 { 719 struct lpcib_softc *sc = device_private(self); 720 struct lpcib_hpet_attach_arg arg; 721 uint32_t hpet_reg, val; 722 723 if (sc->sc_has_ich5_hpet) { 724 val = pci_conf_read(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag, 725 LPCIB_PCI_GEN_CNTL); 726 switch (val & LPCIB_ICH5_HPTC_WIN_MASK) { 727 case LPCIB_ICH5_HPTC_0000: 728 hpet_reg = LPCIB_ICH5_HPTC_0000_BASE; 729 break; 730 case LPCIB_ICH5_HPTC_1000: 731 hpet_reg = LPCIB_ICH5_HPTC_1000_BASE; 732 break; 733 case LPCIB_ICH5_HPTC_2000: 734 hpet_reg = LPCIB_ICH5_HPTC_2000_BASE; 735 break; 736 case LPCIB_ICH5_HPTC_3000: 737 hpet_reg = LPCIB_ICH5_HPTC_3000_BASE; 738 break; 739 default: 740 return; 741 } 742 val |= sc->sc_hpet_reg | LPCIB_ICH5_HPTC_EN; 743 pci_conf_write(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag, 744 LPCIB_PCI_GEN_CNTL, val); 745 } else if (sc->sc_has_rcba) { 746 val = bus_space_read_4(sc->sc_rcbat, sc->sc_rcbah, 747 LPCIB_RCBA_HPTC); 748 switch (val & LPCIB_RCBA_HPTC_WIN_MASK) { 749 case LPCIB_RCBA_HPTC_0000: 750 hpet_reg = LPCIB_RCBA_HPTC_0000_BASE; 751 break; 752 case LPCIB_RCBA_HPTC_1000: 753 hpet_reg = LPCIB_RCBA_HPTC_1000_BASE; 754 break; 755 case LPCIB_RCBA_HPTC_2000: 756 hpet_reg = LPCIB_RCBA_HPTC_2000_BASE; 757 break; 758 case LPCIB_RCBA_HPTC_3000: 759 hpet_reg = LPCIB_RCBA_HPTC_3000_BASE; 760 break; 761 default: 762 return; 763 } 764 val |= LPCIB_RCBA_HPTC_EN; 765 bus_space_write_4(sc->sc_rcbat, sc->sc_rcbah, LPCIB_RCBA_HPTC, 766 val); 767 } else { 768 /* No HPET here */ 769 return; 770 } 771 772 arg.hpet_mem_t = sc->sc_pa.pa_memt; 773 arg.hpet_reg = hpet_reg; 774 775 config_found_ia(self, "hpetichbus", &arg, NULL); 776 } 777 #endif 778