1# $NetBSD: INSTALL,v 1.108 2015/08/12 07:53:58 maxv Exp $ 2 3# 4# INSTALL -- installation kernel. 5# 6 7include "arch/x68k/conf/std.x68k" 8 9#options INCLUDE_CONFIG_FILE # embed config file in kernel binary 10 11#ident "INSTALL-$Revision: 1.108 $" 12 13makeoptions COPTS="-Os" # Optimise for space. Implies -O2 14 15maxusers 4 16 17## Enable the hooks used for initializing the memory-disk. 18options MEMORY_DISK_HOOKS 19options MEMORY_DISK_IS_ROOT # Force root on memory-disk 20options MEMORY_DISK_SERVER=0 # No user space hooks 21options MEMORY_DISK_ROOT_SIZE=3400 22options MEMORY_DISK_RBFLAGS=RB_SINGLE # boot in single-user mode 23 24## System kernel configuration. See options(4) for more detail. 25 26 27## Options for variants of the m68k MPU 28## you must have at least the correct one; REQUIRED 29options M68030 30options M68040 31options M68060 32## If you want an optimized kernel for a specific processor, use either: 33#makeoptions CMACHFLAGS="-m68030" 34#makeoptions CMACHFLAGS="-m68040 -Wa,-m68030 -Wa,-m68851" 35#makeoptions CMACHFLAGS="-m68060 -Wa,-m68030 -Wa,-m68851" 36 37 38#### System options specific to the x68k port 39 40options EXTENDED_MEMORY # support for >16MB memory 41options FPU_EMULATE # software fpu emulation for MC68030 42options FPSP # floating point emulation for MC68040 43options M060SP # int/fp emulation for MC68060 44#options JUPITER # support for "Jupiter-X" accelerator 45#options MAPPEDCOPY # use page mapping for large copyin/copyout 46#options ZSCONSOLE,ZSCN_SPEED="9600" # use serial console 47 48 49#### System options that are the same for all ports 50 51## Root device configuration: change the ?'s if you are going to use a 52## nonstandard root partition (other than where the kernel is booted from) 53## and/or nonstandard root type (not ffs or nfs). Normally this can be 54## automagically determined at boot time. 55 56config netbsd root on ? type ? 57#config netbsd root on sd0 type ffs 58 59## RTC is offset from GMT; -540 means JST-9 60options RTC_OFFSET=-540 # hardware clock is this many mins. west of GMT 61 62## System call tracing (see ktrace(1)). 63#options KTRACE 64 65## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 66#options SYSVMSG # System V message queues 67#options SYSVSEM # System V semaphores 68#options SYSVSHM # System V shared memory 69 70## Loadable kernel module support 71 72options USERCONF # userconf(4) support 73options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 74#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 75 76## NFS boot options; not supported currently: needs nfsboot program 77#options NFS_BOOT_BOOTPARAM 78#options NFS_BOOT_BOOTP 79#options NFS_BOOT_DHCP 80 81#### Debugging options 82 83## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 84## serial console break or keyboard reset, where the PROM would normally 85## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 86#options DDB # kernel dynamic debugger 87#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 88#options DDB_ONPANIC=1 # see also sysctl(7): `ddb.onpanic' 89#options PANICBUTTON # interrupt switch invokes DDB 90 91## You may also use gdb, on another computer connected to this machine over 92## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 93## KGDB_DEV is a dev_t encoded device number of the serial port to use. 94## KGDB is not supported for now. 95#options KGDB # support for kernel gdb 96#options KGDB_DEV=0xc00 # kgdb device number 97#options KGDB_DEVRATE=9600 # baud rate 98 99## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 100## such that gdb(1) can be used on a kernel coredump. 101 102#makeoptions DEBUG="-g" 103 104## Adds code to the kernel that does internal consistency checks, and will 105## cause the kernel to panic if corruption of internal data structures 106## is detected. 107#options DIAGNOSTIC # extra kernel sanity checking 108 109## Enable (possibly expensive) debugging code that may also display messages 110## on the system console 111#options DEBUG 112 113## Make SCSI error messages more verbose when explaining their meanings. 114#options SCSIVERBOSE 115 116## `INSECURE' turns off the kernel security level (securelevel = 0 always). 117## This allows writing to /dev/mem, loading kernel modules while multi-user, 118## and other insecurities good only for development work. Do not use this 119## option on a production machine. 120#options INSECURE 121 122## `FDSCRIPTS' allows non-readable but executable scripts by providing a 123## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 124## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 125## opaque file mechanism. Perl calls this "secure setuid scripts." 126 127#options FDSCRIPTS 128#options SETUIDSCRIPTS 129 130## Options for compatibility with previous releases foreign system binaries. 131 132#options COMPAT_43 # 4.3BSD system interfaces 133#options COMPAT_09 # NetBSD 0.9, 134#options COMPAT_10 # NetBSD 1.0, 135#options COMPAT_11 # NetBSD 1.1, 136#options COMPAT_12 # NetBSD 1.2, 137#options COMPAT_13 # NetBSD 1.3, 138#options COMPAT_14 # NetBSD 1.4, 139#options COMPAT_15 # NetBSD 1.5, 140#options COMPAT_16 # NetBSD 1.6, 141#options COMPAT_20 # NetBSD 2.0, 142options COMPAT_30 # NetBSD 3.0, and 143options COMPAT_40 # NetBSD 4.0 binary compatibility. 144#options COMPAT_AOUT_M68K # compatibility with NetBSD/m68k a.out 145#options COMPAT_M68K4K # NetBSD/m68k4k binaries 146#options COMPAT_SUNOS # SunOS 4.x binary compatibility; broken 147#options COMPAT_SVR4 # SVR4 binary compatibility; broken 148#options COMPAT_LINUX # Linux/m68k binary compatibility 149#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 150options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 151 152## File systems. 153file-system FFS # Berkeley Fast Filesystem 154file-system NFS # Sun NFS-compatible filesystem client 155#file-system KERNFS # kernel data-structure filesystem 156#file-system NULLFS # NULL layered filesystem 157#file-system OVERLAY # overlay file system 158#file-system MFS # memory-based filesystem 159#file-system FDESC # user file descriptor filesystem 160#file-system UMAPFS # uid/gid remapping filesystem 161#file-system LFS # Log-structured filesystem (experimental) 162#file-system PROCFS # /proc 163file-system CD9660 # ISO 9660 + Rock Ridge file system 164#file-system UNION # union file system (a little buggy) 165file-system MSDOSFS # MS-DOS FAT filesystem(s). 166#file-system ADOSFS # AmigaDOS filesystem 167#file-system PTYFS # /dev/pts/N support 168 169## File system options. 170#options NFSSERVER # Sun NFS-compatible filesystem server 171#options QUOTA # legacy UFS quotas 172#options QUOTA2 # new, in-filesystem UFS quotas 173#options FFS_EI # FFS Endian Independent support 174options WAPBL # File system journaling support 175#options NFS_V2_ONLY # Exclude NFS3 code to save space 176options FFS_NO_SNAPSHOT # No FFS snapshot support 177 178## Network protocol support. In most environments, INET is required. 179options INET # IP (Internet Protocol) v4 180options INET6 # IPV6 181#options IPSEC # IP security 182#options IPSEC_DEBUG # debug for IP security 183#options GATEWAY # packet forwarding ("router switch") 184#options MROUTING # packet forwarding of multicast packets 185#options PIM # Protocol Independent Multicast 186#options DIRECTED_BROADCAST # allow broadcasts through routers 187#options NETATALK # AppleTalk (over Ethernet) protocol 188#options NTP # Network Time Protocol in-kernel support 189#options PPS_SYNC # Add serial line synchronization for NTP 190#options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 191#options IPFILTER_LOOKUP # ippool(8) support 192#options IPFILTER_COMPAT # Compat for IP-Filter 193#options IPFILTER_DEFAULT_BLOCK # block all packets by default 194#options PPP_BSDCOMP # Add BSD compression to ppp device 195#options PPP_DEFLATE # Add deflate (libz) compression to ppp device 196#options PPP_FILTER # Add active filters for ppp (via bpf) 197#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 198 199 200#### Device configurations 201 202## Fundamental devices; see also std.x68k 203dmac0 at intio0 addr 0xe84000 # DMA controller 204xel0 at intio0 205opm0 at intio0 addr 0xe90000 # OPM: required for fdc 206 207## Display devices and console 208grfbus0 at mainbus0 # bitmapped displays 209grf0 at grfbus0 addr 0 # multiplane graphics 210#grf1 at grfbus0 addr 1 # flexible graphics 211 212kbd0 at mfp0 # standard keyboard 213ite0 at grf0 grfaddr 0 # internal terminal emulator 214options ITE_KERNEL_ATTR=4 # bold for kernel messages 215 # see /sys/arch/x68k/dev/itevar.h 216 217## floppy disks 218fdc0 at intio0 addr 0xe94000 intr 96 dma 0 dmaintr 100 # floppy controller 219fd* at fdc0 unit ? # builtin floppy drives 220 221## SCSI devices 222scsirom0 at intio0 # SCSI BIOS 223scsirom1 at intio0 # SCSI BIOS 224spc* at scsirom? # genuin SCSI 225scsibus* at spc? 226mha0 at scsirom? # Mankai MK-HA1 (Mach-2) 227scsibus* at mha0 228 229sd* at scsibus? target ? lun ? # SCSI disks 230cd* at scsibus? target ? lun ? # SCSI CD-ROMs 231st* at scsibus? target ? lun ? # SCSI tapes 232#ss* at scsibus? target ? lun ? # SCSI scanners 233#ch* at scsibus? target ? lun ? # SCSI changer devices 234#uk* at scsibus? target ? lun ? # SCSI unknown devices 235 236## Ports 237zsc0 at intio0 addr 0xe98000 intr 112 238zstty0 at zsc0 channel 0 # built-in RS-232C 239#ms0 at zsc0 channel 1 # standard mouse 240#zsc1 at intio0 addr 0xeafc00 intr 113 241#zstty2 at zsc1 channel 0 242#zstty3 at zsc1 channel 1 243#zsc2 at intio0 addr 0xeafc10 intr 114 244#zstty4 at zsc2 channel 0 245#zstty5 at zsc2 channel 1 246#par0 at intio0 addr 0xe8c000 # Builtin printer port 247 248sram0 at intio0 addr 0xed0000 # battery-backuped static RAM 249#pseudo-device bell # OPM bell 250 251#com0 at intio0 addr 0xefff00 intr 240 # PSX16550, port1 252#com1 at intio0 addr 0xefff10 intr 241 # PSX16550, port2 253 254## Audio device 255#vs0 at intio0 addr 0xe92000 dma 3 dmaintr 106 256#audio* at vs? 257 258## Network interfaces 259ne* at intio0 addr 0xece300 intr 249 # Nereid Ethernet 260ne* at intio0 addr 0xeceb00 intr 248 # Nereid Ethernet 261neptune0 at intio0 addr 0xece000 intr 249 # Neptune-X 262neptune1 at intio0 addr 0xece400 intr 249 # Neptune-X at alt. addr. 263ne* at neptune? addr 0x300 # NE2000 or clone 264 265 266#### Pseudo devices 267 268pseudo-device md # boot floppy image 269pseudo-device loop 270pseudo-device bpfilter 271pseudo-device sl 272pseudo-device pty # pseudo-terminals 273