xref: /netbsd-src/sys/arch/sun3/include/mon.h (revision cda4f8f6ee55684e8d311b86c99ea59191e6b74f)
1 /*
2  * This file derived from kernel/mach/sun3.md/machMon.h from the
3  * sprite distribution.
4  *
5  * In particular, this file came out of the Walnut Creek cdrom collection
6  * which contained no warnings about any possible copyright infringement
7  * It was also indentical to a file in the sprite kernel tar file found on
8  * allspice.berkeley.edu.
9  * It also written in the annoying sprite coding style.  I've made
10  * efforts not to heavily edit their file, just ifdef parts out. -- glass
11  */
12 
13 #ifndef _SUN3_MON_H
14 #define _SUN3_MON_H
15 /*
16  * machMon.h --
17  *
18  *     Structures, constants and defines for access to the sun monitor.
19  *     These are translated from the sun monitor header file "sunromvec.h".
20  *
21  * NOTE: The file keyboard.h in the monitor directory has all sorts of useful
22  *       keyboard stuff defined.  I haven't attempted to translate that file
23  *       because I don't need it.  If anyone wants to use it, be my guest.
24  *
25  * Copyright (C) 1985 Regents of the University of California
26  * All rights reserved.
27  *
28  *
29  * Header: /cdrom/src/kernel/Cvsroot/kernel/mach/sun3.md/machMon.h,v 9.1 90/10/03 13:52:34 mgbaker Exp SPRITE (Berkeley)
30  */
31 
32 #ifndef _MACHMON
33 #define _MACHMON
34 
35 /*
36  * The memory addresses for the PROM, and the EEPROM.
37  * On the sun2 these addresses are actually 0x00EF??00
38  * but only the bottom 24 bits are looked at so these still
39  * work ok.
40  */
41 
42 #define PROM_BASE       0x0fef0000
43 
44 /*
45  * The table entry that describes a device.  It exists in the PROM; a
46  * pointer to it is passed in MachMonBootParam.  It can be used to locate
47  * PROM subroutines for opening, reading, and writing the device.
48  *
49  * When using this interface, only one device can be open at once.
50  *
51  * NOTE: I am not sure what arguments boot, open, close, and strategy take.
52  * What is here is just translated verbatim from the sun monitor code.  We
53  * should figure this out eventually if we need it.
54  */
55 
56 typedef struct {
57 	char	devName[2];		/* The name of the device */
58 	int	(*probe)();		/* probe() --> -1 or found controller
59 					   number */
60 	int	(*boot)();		/* boot(bp) --> -1 or start address */
61 	int	(*open)();		/* open(iobp) --> -1 or 0 */
62 	int	(*close)();		/* close(iobp) --> -1 or 0 */
63 	int	(*strategy)();		/* strategy(iobp,rw) --> -1 or 0 */
64 	char	*desc;			/* Printable string describing dev */
65 } MachMonBootTable;
66 
67 /*
68  * Structure set up by the boot command to pass arguments to the program that
69  * is booted.
70  */
71 
72 typedef struct {
73 	char		*argPtr[8];	/* String arguments */
74 	char		strings[100];	/* String table for string arguments */
75 	char		devName[2];	/* Device name */
76 	int		ctlrNum;	/* Controller number */
77 	int		unitNum;	/* Unit number */
78 	int		partNum;	/* Partition/file number */
79 	char		*fileName;	/* File name, points into strings */
80 	MachMonBootTable   *bootTable;	/* Points to table entry for device */
81 } MachMonBootParam;
82 
83 /*
84  * Here is the structure of the vector table which is at the front of the boot
85  * rom.  The functions defined in here are explained below.
86  *
87  * NOTE: This struct has references to the structures keybuf and globram which
88  *       I have not translated.  If anyone needs to use these they should
89  *       translate these structs into Sprite format.
90  */
91 
92 typedef struct {
93 	char		*initSp;		/* Initial system stack ptr
94 						 * for hardware */
95 	int		(*startMon)();		/* Initial PC for hardware */
96 
97 	int		*diagberr;		/* Bus err handler for diags */
98 
99 	/*
100 	 * Monitor and hardware revision and identification
101 	 */
102 
103 	MachMonBootParam **bootParam;		/* Info for bootstrapped pgm */
104  	unsigned	*memorySize;		/* Usable memory in bytes */
105 
106 	/*
107 	 * Single-character input and output
108 	 */
109 
110 	unsigned char	(*getChar)();		/* Get char from input source */
111 	int		(*putChar)();		/* Put char to output sink */
112 	int		(*mayGet)();		/* Maybe get char, or -1 */
113 	int		(*mayPut)();		/* Maybe put char, or -1 */
114 	unsigned char	*echo;			/* Should getchar echo? */
115 	unsigned char	*inSource;		/* Input source selector */
116 	unsigned char	*outSink;		/* Output sink selector */
117 
118 	/*
119 	 * Keyboard input (scanned by monitor nmi routine)
120 	 */
121 
122 	int		(*getKey)();		/* Get next key if one exists */
123 	int		(*initGetKey)();	/* Initialize get key */
124 	unsigned int	*translation;		/* Kbd translation selector
125 						   (see keyboard.h in sun
126 						    monitor code) */
127 	unsigned char	*keyBid;		/* Keyboard ID byte */
128 	int		*screen_x;		/* V2: Screen x pos (R/O) */
129 	int		*screen_y;		/* V2: Screen y pos (R/O) */
130 	struct keybuf	*keyBuf;		/* Up/down keycode buffer */
131 
132 	/*
133 	 * Monitor revision level.
134 	 */
135 
136 	char		*monId;
137 
138 	/*
139 	 * Frame buffer output and terminal emulation
140 	 */
141 
142 	int		(*fbWriteChar)();	/* Write a character to FB */
143 	int		*fbAddr;		/* Address of frame buffer */
144 	char		**font;			/* Font table for FB */
145 	int		(*fbWriteStr)();	/* Quickly write string to FB */
146 
147 	/*
148 	 * Reboot interface routine -- resets and reboots system.  No return.
149 	 */
150 
151 	int		(*reBoot)();		/* e.g. reBoot("xy()vmunix") */
152 
153 	/*
154 	 * Line input and parsing
155 	 */
156 
157 	unsigned char	*lineBuf;		/* The line input buffer */
158 	unsigned char	**linePtr;		/* Cur pointer into linebuf */
159 	int		*lineSize;		/* length of line in linebuf */
160 	int		(*getLine)();		/* Get line from user */
161 	unsigned char	(*getNextChar)();	/* Get next char from linebuf */
162 	unsigned char	(*peekNextChar)();	/* Peek at next char */
163 	int		*fbThere;		/* =1 if frame buffer there */
164 	int		(*getNum)();		/* Grab hex num from line */
165 
166 	/*
167 	 * Print formatted output to current output sink
168 	 */
169 
170 	int		(*printf)();		/* Similar to "Kernel printf" */
171 	int		(*printHex)();		/* Format N digits in hex */
172 
173 	/*
174 	 * Led stuff
175 	 */
176 
177 	unsigned char	*leds;			/* RAM copy of LED register */
178 	int		(*setLeds)();		/* Sets LED's and RAM copy */
179 
180 	/*
181 	 * Non-maskable interrupt  (nmi) information
182 	 */
183 
184 	int		(*nmiAddr)();		/* Addr for level 7 vector */
185 	int		(*abortEntry)();	/* Entry for keyboard abort */
186 	int		*nmiClock;		/* Counts up in msec */
187 
188 	/*
189 	 * Frame buffer type: see <sun/fbio.h>
190 	 */
191 
192 	int		*fbType;
193 
194 	/*
195 	 * Assorted other things
196 	 */
197 
198 	unsigned	romvecVersion;		/* Version # of Romvec */
199 	struct globram  *globRam;		/* monitor global variables */
200 	caddr_t		kbdZscc;		/* Addr of keyboard in use */
201 
202 	int		*keyrInit;		/* ms before kbd repeat */
203 	unsigned char	*keyrTick; 		/* ms between repetitions */
204 	unsigned	*memoryAvail;		/* V1: Main mem usable size */
205 	long		*resetAddr;		/* where to jump on a reset */
206 	long		*resetMap;		/* pgmap entry for resetaddr */
207 						/* Really struct pgmapent *  */
208 	int		(*exitToMon)();		/* Exit from user program */
209 	unsigned char	**memorybitmap;		/* V1: &{0 or &bits} */
210 	void		(*setcxsegmap)();	/* Set seg in any context */
211 	void		(**vector_cmd)();	/* V2: Handler for 'v' cmd */
212 	int		dummy1z;
213 	int		dummy2z;
214 	int		dummy3z;
215 	int		dummy4z;
216 } MachMonRomVector;
217 
218 /*
219  * Functions defined in the vector:
220  *
221  *
222  * getChar -- Return the next character from the input source
223  *
224  *     unsigned char getChar()
225  *
226  * putChar -- Write the given character to the output source.
227  *
228  *     void putChar(ch)
229  *	   char ch;
230  *
231  * mayGet -- Maybe get a character from the current input source.  Return -1
232  *           if don't return a character.
233  *
234  * 	int mayGet()
235  *
236  * mayPut -- Maybe put a character to the current output source.   Return -1
237  *           if no character output.
238  *
239  *	int  mayPut(ch)
240  *	    char ch;
241  *
242  * getKey -- Returns a key code (if up/down codes being returned),
243  * 	     a byte of ASCII (if that's requested),
244  * 	     NOKEY (if no key has been hit).
245  *
246  *	int getKey()
247  *
248  * initGetKey --  Initialize things for get key.
249  *
250  *	void initGetKey()
251  *
252  * fbWriteChar -- Write a character to the frame buffer
253  *
254  *	void fwritechar(ch)
255  *	    unsigned char ch;
256  *
257  * fbWriteStr -- Write a string to the frame buffer.
258  *
259  *   	void fwritestr(addr,len)
260  *  	    register unsigned char *addr;	/ * String to be written * /
261  *  	    register short len;			/ * Length of string * /
262  *
263  * getLine -- read the next input line into a global buffer
264  *
265  *	getline(echop)
266  *          int echop;	/ * 1 if should echo input, 0 if not * /
267  *
268  * getNextChar -- return the next character from the global line buffer.
269  *
270  *	unsigned char getNextChar()
271  *
272  * peekNextChar -- look at the next character in the global line buffer.
273  *
274  *	unsigned char peekNextChar()
275  *
276  * getNum -- Grab hex num from the global line buffer.
277  *
278  *	int getNum()
279  *
280  * printf -- Scaled down version of C library printf.  Only %d, %x, %s, and %c
281  * 	     are recognized.
282  *
283  * printhex -- prints rightmost <digs> hex digits of <val>
284  *
285  *      printhex(val,digs)
286  *          register int val;
287  *     	    register int digs;
288  *
289  * abortEntry -- Entry for keyboard abort.
290  *
291  *     abortEntry()
292  */
293 
294 /*
295  * Where the rom vector is defined.
296  */
297 
298 #define	romVectorPtr	((MachMonRomVector *) PROM_BASE)
299 
300 #if 0
301 /*
302  * Functions and defines to access the monitor.
303  */
304 
305 #define Mach_MonPrintf (romVectorPtr->printf)
306 
307 extern void Mach_MonPutChar _ARGS_((int ch));
308 extern int Mach_MonMayPut _ARGS_((int ch));
309 extern void Mach_MonAbort _ARGS_((void));
310 extern void Mach_MonReboot _ARGS_((char *rebootString));
311 extern void Mach_MonStartNmi _ARGS_((void));
312 extern void Mach_MonStopNmi _ARGS_((void));
313 
314 extern  void    Mach_MonTrap _ARGS_((Address address_to_trap_to));
315 
316 /*
317  * These routines no longer work correctly with new virtual memory.
318  */
319 
320 #define Mach_MonGetChar (romVectorPtr->getChar)
321 #define Mach_MonGetLine (romVectorPtr->getLine)
322 #define Mach_MonGetNextChar (romVectorPtr->getNextChar)
323 #define Mach_MonPeekNextChar (romVectorPtr->peekNextChar)
324 #endif
325 
326 #define mon_printf (romVectorPtr->printf)
327 #define mon_putchar (romVectorPtr->printf)
328 #define mon_exit_to_mon (romVectorPtr->exitToMon)
329 #define mon_reboot (romVectorPtr->exitToMon)
330 #define romp (romVectorPtr)
331 
332 #define MONSTART  0x0FE00000
333 #define MONEND    0x0FF00000
334 
335 #endif /* _MACHMON */
336 #endif /* SUN3_MON_H */
337