1# $NetBSD: GENERIC,v 1.172 2015/08/12 07:53:58 maxv Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21# Supports Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E) 22# Supports root on: ie0, le0, sd*, ... 23 24include "arch/sun3/conf/std.sun3" 25 26options INCLUDE_CONFIG_FILE # embed config file in kernel binary 27 28#ident "GENERIC-$Revision: 1.172 $" 29 30makeoptions COPTS="-Os" # bootloader has size limit (~2MB) 31 32# Machines to be supported by this kernel 33options FPU_EMULATE 34options HAVECACHE # Sun3/260 VAC 35 36# Needs to be set per system. i.e change these as you see fit 37maxusers 4 38 39# Standard system options 40options KTRACE # system call tracing 41options SYSVMSG # System V message queues 42options SYSVSEM # System V semaphores 43options SYSVSHM # System V shared memory 44 45#options MODULAR # new style module(7) framework 46#options MODULAR_DEFAULT_AUTOLOAD 47 48#options INSECURE # disable kernel security level 49#options USERCONF # userconf(4) support 50#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 51options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 52 53# Enable experimental buffer queue strategy for better responsiveness under 54# high disk I/O load. Use it with caution - it's not proven to be stable yet. 55#options BUFQ_READPRIO 56#options BUFQ_PRIOCSCAN 57 58# Which kernel debugger? Uncomment either this: 59options DDB 60# ... or these for KGDB (gdb remote target) 61#makeoptions DEBUG="-g" # debugging symbols for gdb 62#options KGDB 63#options KGDB_DEV=0x0C01 # ttya=0C00 ttyb=0C01 64 65# Other debugging options 66options DDB_HISTORY_SIZE=512 # enable history editing in DDB 67#options DEBUG # kernel debugging code 68#options DIAGNOSTIC # extra kernel sanity checking 69#options PMAP_DEBUG 70#options SCSIDEBUG 71#options SCSIVERBOSE # Verbose SCSI errors 72 73# Compatibility options 74options COMPAT_SUNOS # can run SunOS 4.1.1 executables 75#options COMPAT_SVR4 # can run SVR4 executables 76options COMPAT_43 # and 4.3BSD and ... 77options COMPAT_10 # NetBSD 1.0, 78options COMPAT_11 # NetBSD 1.1, 79options COMPAT_12 # NetBSD 1.2, 80options COMPAT_13 # NetBSD 1.3, 81options COMPAT_14 # NetBSD 1.4, 82options COMPAT_15 # NetBSD 1.5, 83options COMPAT_16 # NetBSD 1.6, 84options COMPAT_20 # NetBSD 2.0, 85options COMPAT_30 # NetBSD 3.0, 86options COMPAT_40 # NetBSD 4.0, 87options COMPAT_50 # NetBSD 5.0, 88options COMPAT_60 # NetBSD 6.0, and 89options COMPAT_70 # NetBSD 7.0 binary compatibility. 90options COMPAT_AOUT_M68K # support for NetBSD a.out executables 91#options COMPAT_LINUX # can run Linux/m68k executables 92options EXEC_AOUT # support for a.out executables 93#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 94options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 95 96# Filesystem options 97file-system FFS # Berkeley Fast Filesystem 98file-system NFS # Sun NFS client support 99file-system CD9660 # ISO 9660 + Rock Ridge file system 100file-system FDESC # /dev/fd/* 101file-system KERNFS # /kern 102file-system NULLFS # loopback file system 103#file-system OVERLAY # overlay file system 104file-system PROCFS # /proc 105#file-system UNION # union file system 106file-system MFS # memory-based filesystem 107file-system PTYFS # /dev/pts/N support 108file-system TMPFS # Efficient memory file-system 109#file-system UDF # experimental - OSTA UDF CD/DVD file-system 110 111options NFSSERVER # nfs server support 112#options QUOTA # legacy UFS quotas 113#options QUOTA2 # new, in-filesystem UFS quotas 114#options FFS_EI # FFS Endian Independent support 115options WAPBL # File system journaling support 116#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 117options FFS_NO_SNAPSHOT # No FFS snapshot support 118#options UFS_EXTATTR # Extended attribute support for UFS1 119 120# Networking options 121options INET # IP protocol stack support 122options INET6 # IPV6 123#options IPSEC # IP security 124#options IPSEC_DEBUG # debug for IP security 125#options GATEWAY # IP packet forwarding 126#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 127 128#options ALTQ # Manipulate network interfaces' output queues 129#options ALTQ_BLUE # Stochastic Fair Blue 130#options ALTQ_CBQ # Class-Based Queueing 131#options ALTQ_CDNR # Diffserv Traffic Conditioner 132#options ALTQ_FIFOQ # First-In First-Out Queue 133#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 134#options ALTQ_HFSC # Hierarchical Fair Service Curve 135#options ALTQ_LOCALQ # Local queueing discipline 136#options ALTQ_PRIQ # Priority Queueing 137#options ALTQ_RED # Random Early Detection 138#options ALTQ_RIO # RED with IN/OUT 139#options ALTQ_WFQ # Weighted Fair Queueing 140 141# Work-around for root on slow servers (insurance...) 142options NFS_BOOT_RWSIZE=1024 143options NFS_BOOT_BOOTPARAM 144 145config netbsd root on ? type ? 146 147# On-board I/O space (required) 148include "arch/sun3/conf/obio.sun3" 149 150# On-board memory (optional) 151# See frame-buffers 152obmem0 at mainbus? 153 154# VME bus support (optional) 155# One unit for each address space 156vme0 at mainbus? # A16/D16 157vme1 at mainbus? # A16/D32 158vme2 at mainbus? # A24/D16 159vme3 at mainbus? # A24/D32 160vme4 at mainbus? # A32/D16 161vme5 at mainbus? # A32/D32 162 163# 164# Serial ports 165# 166zstty0 at zsc1 channel 0 # ttya 167zstty1 at zsc1 channel 1 # ttyb 168 169kbd0 at zsc0 channel 0 # keyboard 170ms0 at zsc0 channel 1 # mouse 171 172# 173# Network devices 174# 175 176# Intel Ethernet (onboard, or VME) 177ie0 at obio0 addr 0x0C0000 ipl 3 178ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75 179 180# Lance Ethernet (only onboard) 181le0 at obio0 addr 0x120000 ipl 3 182 183# All Sun3 machines with an "le" (3/50, 3/60) should be 184# presumed to have the old, buggy LANCE chip. (Rev. C) 185options LANCE_REVC_BUG 186 187# 188# Disk and tape devices 189# 190 191# Sun3 "si" SCSI controller (NCR 5380) 192# This driver has several flags which may be enabled using 193# the "flags" directive. Valid flags are: 194# 195# 0x000ff Set (1<<target) to disable disconnect/reselect 196# 0x0ff00 Set (1<<(target+8)) to disable parity checking 197# 0x10000 Set this bit to disable DMA interrupts (poll) 198# 0x20000 Set this bit to disable DMA entirely (use PIO) 199# 200# For example: "flags 0x1000f" would disable DMA interrupts, 201# and disable disconnect/reselect for targets 0-3 202si0 at obio0 addr 0x140000 ipl 2 203si0 at vme2 addr 0x200000 ipl 2 vect 0x40 204si1 at vme2 addr 0x204000 ipl 2 vect 0x41 205 206# Xylogics 450/451 controllers (VME A16/D16) 207xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48 208xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49 209xy* at xyc? drive ? 210 211# Xylogics 7053 controllers (VME A16/D32) 212xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44 213xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45 214xd* at xdc? drive ? 215 216# Xylogics 472 tape controllers? 217 218# Sun3/E SCSI+Ethernet board (VME A24/D16) 219# Note: the board uses vect and vect+1 220sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75 221sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77 222si* at sebuf? 223ie* at sebuf? 224 225# 226# Frame buffer devices 227# 228 229include "arch/sun3/conf/bw2.sun3" 230include "arch/sun3/conf/cg4.sun3" 231 232# 3/60 P4 accelerated 8-bit color frame buffer 233# cgsix0 at obmem0 addr 0xff000000 234 235# 3/60 P4 24-bit color frame buffer 236# cgeight0 at obmem0 addr 0xff300000 237 238# Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16). 239cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8 240 241# Support for the CG9 24-bit frame buffer (VME A32/D32). 242# cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA 243 244# 245# SCSI infrastructure 246# 247scsibus* at scsi? 248 249sd* at scsibus? target ? lun ? # SCSI disks 250st* at scsibus? target ? lun ? # SCSI tapes 251cd* at scsibus? target ? lun ? # SCSI CD-ROMs 252#ch* at scsibus? target ? lun ? # SCSI changer devices 253#ss* at scsibus? target ? lun ? # SCSI scanners 254uk* at scsibus? target ? lun ? # unknown SCSI devices 255 256# 257# accept filters 258pseudo-device accf_data # "dataready" accept filter 259pseudo-device accf_http # "httpready" accept filter 260 261# Memory-disk drivers 262pseudo-device md 263 264# Misc. 265pseudo-device loop # network loopback 266pseudo-device bpfilter # packet filter 267#pseudo-device carp # Common Address Redundancy Protocol 268pseudo-device sl # CSLIP 269pseudo-device ppp # PPP 270#pseudo-device pppoe # PPP over Ethernet (RFC 2516) 271#pseudo-device tun # network tunneling over tty 272#pseudo-device tap # virtual Ethernet 273#pseudo-device gre # generic L3 over IP tunnel 274#pseudo-device ipfilter # ip filter 275#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 276#pseudo-device faith # IPv[46] tcp relay translation i/f 277#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 278pseudo-device vlan # IEEE 802.1q encapsulation 279#pseudo-device bridge # simple inter-network bridging 280#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 281#pseudo-device agr # IEEE 802.3ad link aggregation 282 283pseudo-device pty # pseudo-terminals 284pseudo-device vnd # paging to files 285#options VND_COMPRESSION # compressed vnd(4) 286#pseudo-device ccd # concatenated disks 287#pseudo-device cgd # cryptographic disk devices 288#pseudo-device raid # RAIDframe disk driver 289#options RAID_AUTOCONFIG # auto-configuration of RAID components 290# Options to enable various other RAIDframe RAID types. 291#options RF_INCLUDE_EVENODD=1 292#options RF_INCLUDE_RAID5_RS=1 293#options RF_INCLUDE_PARITYLOGGING=1 294#options RF_INCLUDE_CHAINDECLUSTER=1 295#options RF_INCLUDE_INTERDECLUSTER=1 296#options RF_INCLUDE_PARITY_DECLUSTERING=1 297#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 298#pseudo-device fss # file system snapshot device 299pseudo-device clockctl # user control of clock subsystem 300pseudo-device ksyms # /dev/ksyms 301#pseudo-device pf # PF packet filter 302#pseudo-device pflog # PF log if 303 304# Veriexec 305# 306# a pseudo device needed for veriexec 307#pseudo-device veriexec 308# 309# Uncomment the fingerprint methods below that are desired. Note that 310# removing fingerprint methods will have almost no impact on the kernel 311# code size. 312# 313#options VERIFIED_EXEC_FP_RMD160 314#options VERIFIED_EXEC_FP_SHA256 315#options VERIFIED_EXEC_FP_SHA384 316#options VERIFIED_EXEC_FP_SHA512 317#options VERIFIED_EXEC_FP_SHA1 318#options VERIFIED_EXEC_FP_MD5 319