1 /* $NetBSD: zs_kgdb.c,v 1.4 2003/07/15 03:36:12 lukem Exp $ */ 2 3 /*- 4 * Copyright (c) 1996 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Gordon W. Ross. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. All advertising materials mentioning features or use of this software 19 * must display the following acknowledgement: 20 * This product includes software developed by the NetBSD 21 * Foundation, Inc. and its contributors. 22 * 4. Neither the name of The NetBSD Foundation nor the names of its 23 * contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 27 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 28 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 30 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 31 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 34 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 36 * POSSIBILITY OF SUCH DAMAGE. 37 */ 38 39 /* 40 * Hooks for kgdb when attached via the z8530 driver 41 * 42 * To use this, build a kernel with: option KGDB, and 43 * boot that kernel with "-d". (The kernel will call 44 * zs_kgdb_init, kgdb_connect.) When the console prints 45 * "kgdb waiting..." you run "gdb -k kernel" and do: 46 * (gdb) set remotebaud 19200 47 * (gdb) target remote /dev/ttyb 48 */ 49 50 #include <sys/cdefs.h> 51 __KERNEL_RCSID(0, "$NetBSD: zs_kgdb.c,v 1.4 2003/07/15 03:36:12 lukem Exp $"); 52 53 #include "opt_kgdb.h" 54 55 #include <sys/param.h> 56 #include <sys/systm.h> 57 #include <sys/proc.h> 58 #include <sys/device.h> 59 #include <sys/conf.h> 60 #include <sys/ioctl.h> 61 #include <sys/kernel.h> 62 #include <sys/syslog.h> 63 #include <sys/kgdb.h> 64 65 #include <dev/ic/z8530reg.h> 66 #include <machine/z8530var.h> 67 #include <machine/promlib.h> 68 #include <sun2/dev/cons.h> 69 70 static void zs_setparam __P((struct zs_chanstate *, int, int)); 71 struct zsops zsops_kgdb; 72 73 extern int zs_getc __P((void *arg)); 74 extern void zs_putc __P((void *arg, int c)); 75 76 static u_char zs_kgdb_regs[16] = { 77 0, /* 0: CMD (reset, etc.) */ 78 0, /* 1: No interrupts yet. */ 79 #ifdef ZS_INIT_IVECT 80 ZS_INIT_IVECT, /* 2: IVECT */ 81 #else 82 0, /* 2: IVECT */ 83 #endif 84 ZSWR3_RX_8 | ZSWR3_RX_ENABLE, 85 ZSWR4_CLK_X16 | ZSWR4_ONESB | ZSWR4_EVENP, 86 ZSWR5_TX_8 | ZSWR5_TX_ENABLE, 87 0, /* 6: TXSYNC/SYNCLO */ 88 0, /* 7: RXSYNC/SYNCHI */ 89 0, /* 8: alias for data port */ 90 #ifdef ZS_INIT_IVECT 91 ZSWR9_MASTER_IE, 92 #else 93 ZSWR9_MASTER_IE | ZSWR9_NO_VECTOR, 94 #endif 95 0, /*10: Misc. TX/RX control bits */ 96 ZSWR11_TXCLK_BAUD | ZSWR11_RXCLK_BAUD, 97 14, /*12: BAUDLO (default=9600) */ 98 0, /*13: BAUDHI (default=9600) */ 99 ZSWR14_BAUD_ENA | ZSWR14_BAUD_FROM_PCLK, 100 ZSWR15_BREAK_IE, 101 }; 102 103 /* 104 * This replaces "zs_reset()" in the sparc driver. 105 */ 106 static void 107 zs_setparam(cs, iena, rate) 108 struct zs_chanstate *cs; 109 int iena; 110 int rate; 111 { 112 int s, tconst; 113 114 memcpy(cs->cs_preg, zs_kgdb_regs, 16); 115 116 if (iena) { 117 cs->cs_preg[1] = ZSWR1_RIE | ZSWR1_SIE; 118 } 119 120 /* Initialize the speed, etc. */ 121 tconst = BPS_TO_TCONST(cs->cs_brg_clk, rate); 122 cs->cs_preg[5] |= ZSWR5_DTR | ZSWR5_RTS; 123 cs->cs_preg[12] = tconst; 124 cs->cs_preg[13] = tconst >> 8; 125 126 s = splhigh(); 127 zs_loadchannelregs(cs); 128 splx(s); 129 } 130 131 /* 132 * Set up for kgdb; called at boot time before configuration. 133 * KGDB interrupts will be enabled later when zs0 is configured. 134 * Called after cninit(), so printf() etc. works. 135 */ 136 void 137 zs_kgdb_init() 138 { 139 struct zs_chanstate cs; 140 struct zsdevice *zsd; 141 volatile struct zschan *zc; 142 int channel, promzs_unit; 143 extern const struct cdevsw zstty_cdevsw; 144 145 /* printf("zs_kgdb_init: kgdb_dev=0x%x\n", kgdb_dev); */ 146 if (cdevsw_lookup(kgdb_dev) != &zstty_cdevsw) 147 return; 148 149 /* Note: (ttya,ttyb) on zs0, and (ttyc,ttyd) on zs2 */ 150 promzs_unit = (kgdb_dev & 2) ? 2 : 0; 151 channel = kgdb_dev & 1; 152 printf("zs_kgdb_init: attaching tty%c at %d baud\n", 153 'a' + (kgdb_dev & 3), kgdb_rate); 154 155 /* Setup temporary chanstate. */ 156 memset((caddr_t)&cs, 0, sizeof(cs)); 157 zsd = zs_find_prom(promzs_unit); 158 if (zsd == NULL) { 159 printf("zs_kgdb_init: zs not mapped.\n"); 160 return; 161 } 162 zc = (channel == 0) ? &zsd->zs_chan_a : &zsd->zs_chan_b; 163 164 cs.cs_channel = channel; 165 cs.cs_brg_clk = PCLK / 16; 166 cs.cs_reg_csr = &zc->zc_csr; 167 cs.cs_reg_data = &zc->zc_data; 168 169 /* Now set parameters. (interrupts disabled) */ 170 zs_setparam(&cs, 0, kgdb_rate); 171 172 /* Store the getc/putc functions and arg. */ 173 kgdb_attach(zs_getc, zs_putc, (void *)zc); 174 } 175 176 /* 177 * This is a "hook" called by zstty_attach to allow the tty 178 * to be "taken over" for exclusive use by kgdb. 179 * Return non-zero if this is the kgdb port. 180 * 181 * Set the speed to kgdb_rate, CS8, etc. 182 */ 183 int 184 zs_check_kgdb(cs, dev) 185 struct zs_chanstate *cs; 186 int dev; 187 { 188 189 if (dev != kgdb_dev) 190 return (0); 191 192 /* 193 * Yes, this is port in use by kgdb. 194 */ 195 cs->cs_private = NULL; 196 cs->cs_ops = &zsops_kgdb; 197 198 /* Now set parameters. (interrupts enabled) */ 199 zs_setparam(cs, 1, kgdb_rate); 200 201 return (1); 202 } 203 204 /* 205 * KGDB framing character received: enter kernel debugger. This probably 206 * should time out after a few seconds to avoid hanging on spurious input. 207 */ 208 void 209 zskgdb(cs) 210 struct zs_chanstate *cs; 211 { 212 int unit = minor(kgdb_dev); 213 214 printf("zstty%d: kgdb interrupt\n", unit); 215 /* This will trap into the debugger. */ 216 kgdb_connect(1); 217 } 218 219 220 /**************************************************************** 221 * Interface to the lower layer (zscc) 222 ****************************************************************/ 223 224 static void zs_kgdb_rxint __P((struct zs_chanstate *)); 225 static void zs_kgdb_stint __P((struct zs_chanstate *, int)); 226 static void zs_kgdb_txint __P((struct zs_chanstate *)); 227 static void zs_kgdb_softint __P((struct zs_chanstate *)); 228 229 int kgdb_input_lost; 230 231 static void 232 zs_kgdb_rxint(cs) 233 struct zs_chanstate *cs; 234 { 235 register u_char c, rr1; 236 237 /* 238 * First read the status, because reading the received char 239 * destroys the status of this char. 240 */ 241 rr1 = zs_read_reg(cs, 1); 242 c = zs_read_data(cs); 243 244 if (rr1 & (ZSRR1_FE | ZSRR1_DO | ZSRR1_PE)) { 245 /* Clear the receive error. */ 246 zs_write_csr(cs, ZSWR0_RESET_ERRORS); 247 } 248 249 if (c == KGDB_START) { 250 zskgdb(cs); 251 } else { 252 kgdb_input_lost++; 253 } 254 } 255 256 static void 257 zs_kgdb_txint(cs) 258 register struct zs_chanstate *cs; 259 { 260 register int rr0; 261 262 rr0 = zs_read_csr(cs); 263 zs_write_csr(cs, ZSWR0_RESET_TXINT); 264 } 265 266 static void 267 zs_kgdb_stint(cs, force) 268 register struct zs_chanstate *cs; 269 int force; 270 { 271 register int rr0; 272 273 rr0 = zs_read_csr(cs); 274 zs_write_csr(cs, ZSWR0_RESET_STATUS); 275 276 /* 277 * Check here for console break, so that we can abort 278 * even when interrupts are locking up the machine. 279 */ 280 if (rr0 & ZSRR0_BREAK) { 281 zskgdb(cs); 282 } 283 } 284 285 static void 286 zs_kgdb_softint(cs) 287 struct zs_chanstate *cs; 288 { 289 printf("zs_kgdb_softint?\n"); 290 } 291 292 struct zsops zsops_kgdb = { 293 zs_kgdb_rxint, /* receive char available */ 294 zs_kgdb_stint, /* external/status */ 295 zs_kgdb_txint, /* xmit buffer empty */ 296 zs_kgdb_softint, /* process software interrupt */ 297 }; 298