1# $NetBSD: GENERIC,v 1.33 2004/11/10 17:54:07 christos Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21# Supports Sun2 (2/120, 2/170, 2/50, ...) 22# Supports root on: ie0, sd*, ... 23 24include "arch/sun2/conf/std.sun2" 25 26options INCLUDE_CONFIG_FILE # embed config file in kernel binary 27 28#ident "GENERIC-$Revision: 1.33 $" 29 30# Machines to be supported by this kernel 31#options FPU_EMULATE 32 33# Needs to be set per system. i.e change these as you see fit 34maxusers 8 35 36# Standard system options 37options KTRACE # system call tracing 38options SYSTRACE # system call vetting via systrace(1) 39options SYSVMSG # System V message queues 40options SYSVSEM # System V semaphores 41#options SEMMNI=10 # number of semaphore identifiers 42#options SEMMNS=60 # number of semaphores in system 43#options SEMUME=10 # max number of undo entries per process 44#options SEMMNU=30 # number of undo structures in system 45options SYSVSHM # System V shared memory 46#options SHMMAXPGS=1024 # 1024 pages is the default 47options P1003_1B_SEMAPHORE # p1003.1b semaphore support 48options LKM # loadable kernel modules 49#options INSECURE # disable kernel security level 50options USERCONF # userconf(4) support 51#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 52options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 53 54# Enable experimental buffer queue strategy for better responsiveness under 55# high disk I/O load. Use it with caution - it's not proven to be stable yet. 56#options NEW_BUFQ_STRATEGY 57 58# Which kernel debugger? Uncomment either this: 59options DDB 60# ... or these for KGDB (gdb remote target) 61#makeoptions DEBUG="-g" # debugging symbols for gdb 62#options KGDB 63#options KGDB_DEV=0x0C00 # ttya=0C00 ttyb=0C01 64 65# Other debugging options 66#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 67#options DEBUG # kernel debugging code 68#options DIAGNOSTIC # extra kernel sanity checking 69#options KMEMSTATS # kernel memory statistics (vmstat -m) 70#options PMAP_DEBUG 71#options SCSIDEBUG 72#options SCSIVERBOSE # Verbose SCSI errors 73 74# Compatibility options 75#options COMPAT_SUNOS # can run SunOS 4.1.1 executables 76options COMPAT_43 # and 4.3BSD and ... 77options COMPAT_AOUT_M68K # support for NetBSD a.out executables 78options COMPAT_16 79#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 80options EXEC_AOUT # support for a.out executables 81options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 82 83# Filesystem options 84file-system FFS # Berkeley Fast Filesystem 85file-system NFS # Sun NFS client support 86file-system CD9660 # ISO 9660 + Rock Ridge file system 87file-system FDESC # /dev/fd/* 88file-system KERNFS # /kern 89file-system NULLFS # loopback file system 90file-system OVERLAY # overlay file system 91#file-system PROCFS # /proc 92file-system UNION # union file system 93file-system MFS # memory-based filesystem 94 95options NFSSERVER # nfs server support 96options QUOTA # FFS quotas 97#options FFS_EI # FFS Endian Independant support 98options SOFTDEP # FFS soft updates support. 99#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code to save space 100options VNODE_OP_NOINLINE # Save space by not inlining vnode op calls 101 102# Networking options 103options INET # IP prototol stack support 104#options INET6 # IPV6 105#options IPSEC # IP security 106#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 107#options IPSEC_DEBUG # debug for IP security 108#options GATEWAY # IP packet forwarding 109#options ISO,TPIP # OSI networking 110#options EON # OSI tunneling over IP 111#options CCITT,LLC,HDLC # X.25 112options PFIL_HOOKS # pfil(9) packet filter hooks. 113#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 114 115#options ALTQ # Manipulate network interfaces' output queues 116#options ALTQ_BLUE # Stochastic Fair Blue 117#options ALTQ_CBQ # Class-Based Queueing 118#options ALTQ_CDNR # Diffserv Traffic Conditioner 119#options ALTQ_FIFOQ # First-In First-Out Queue 120#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 121#options ALTQ_HFSC # Hierarchical Fair Service Curve 122#options ALTQ_LOCALQ # Local queueing discipline 123#options ALTQ_PRIQ # Priority Queueing 124#options ALTQ_RED # Random Early Detection 125#options ALTQ_RIO # RED with IN/OUT 126#options ALTQ_WFQ # Weighted Fair Queueing 127 128# Work-around for root on slow servers (insurance...) 129options NFS_BOOT_RWSIZE=1024 130options NFS_BOOT_BOOTPARAM 131 132config netbsd root on ? type ? 133 134#### Main bus. 135mainbus0 at root 136 137#### Bus types. 138 139obio0 at mainbus? # all Sun-2 140obmem0 at mainbus? # all Sun-2 141mbmem0 at mainbus? # 2/120, 2/170 142mbio0 at mainbus? # 2/120, 2/170 143sun68kvme0 at mainbus? # 2/50, 2/130, 2/160 144vme0 at sun68kvme0 # mi VME attachment 145 146#### Standard system devices. 147 148## The AM9513 clock chip. 149clock0 at obio0 addr 0x002800 # 2/120, 2/170 150clock0 at obio0 addr 0x7f2800 # 2/50, 2/130, 2/160 151 152## The MM58167 time-of-day chip. 153tod0 at obio0 addr 0x003800 # 2/120, 2/170 154tod0 at vme0 addr 0x200800 # 2/50, 2/130, 2/160 155 156#### Serial port configuration. 157 158## Zilog 8530 serial chips. Each has two channels. 159## zs0 is ttya and ttyb. zs1 is the keyboard and mouse. 160## zs0 is REQUIRED to use KGDB. 161zs0 at obio0 addr 0x002000 # 2/120, 2/170 162zs0 at obio0 addr 0x7f2000 # 2/50 163zs1 at obmem0 addr 0x780000 # 2/120, 2/170 164zs1 at obio0 addr 0x7f1800 # 2/50 165zs2 at mbmem0 addr 0x080800 # 2/120, 2/170 (first sc SCSI) 166zs3 at mbmem0 addr 0x081000 # 2/120, 2/170 (first sc SCSI) 167zs4 at mbmem0 addr 0x084800 # 2/120, 2/170 (second sc SCSI) 168zs5 at mbmem0 addr 0x085000 # 2/120, 2/170 (second sc SCSI) 169zstty* at zs? channel ? # ttya 170kbd0 at zstty? # keyboard 171ms0 at zstty? # mouse 172 173#### Disk controllers and disks. 174 175## PAL+logic-based "Sun SCSI 2" Multibus/VME SCSI controller. 176## This driver has several flags which may be enabled using 177## the "flags" directive. Valid flags are: 178## 179## 0x0ff Set (1<<target) to disable parity checking 180## 0x100 Set this bit to disable DMA interrupts (poll) 181## 0x200 Set this bit to disable DMA entirely (use PIO) 182## 183## For example: "flags 0x10f" would disable DMA interrupts, 184## and disable parity for targets 0-3 185 186sc0 at mbmem0 addr 0x80000 ipl 2 flags 0xff 187sc0 at vme0 addr 0x200000 irq 2 vect 0x40 flags 0xff 188sc1 at mbmem0 addr 0x84000 ipl 2 flags 0xff 189 190## NCR5380-based "Sun SCSI 3" VME SCSI controller. 191## This driver has several flags which may be enabled by OR'ing 192## the values and using the "flags" directive. 193## Valid flags are: 194## 195## 0x01 Use DMA (may be polled) 196## 0x02 Use DMA completion interrupts 197## 0x04 Allow disconnect/reselect 198## 199## E.g. the following would enable DMA, interrupts, and reselect: 200## si0 at vme0 addr 0x200000 ipl 3 vect 0x40 flags 0x07 201## 202## By default, DMA is enabled in the driver. 203 204si0 at vme0 addr 0x200000 irq 2 vect 0x40 205 206## These entries find devices on all SCSI busses and assign 207## unit numbers dynamically. 208scsibus* at sc? 209scsibus* at si? 210sd* at scsibus? target ? lun ? # SCSI disks 211st* at scsibus? target ? lun ? # SCSI tapes 212cd* at scsibus? target ? lun ? # SCSI CD-ROMs 213#ch* at scsibus? target ? lun ? # SCSI changer devices 214#ss* at scsibus? target ? lun ? # SCSI scanners 215#ses* at scsibus? target ? lun ? # SCSI SES/SAF-TE 216#uk* at scsibus? target ? lun ? # unknown SCSI 217 218# support old SCSI devices that don't understand the INQUIRY command 219options SCSI_OLD_NOINQUIRY 220 221## Xylogics 450 or 451 Multibus/VME SMD disk controllers and disks. 222#xyc0 at mbio0 addr 0xee40 ipl 2 223xyc0 at vme0 addr 0xee40 irq 2 vect 0x48 224#xyc1 at mbio0 addr 0xee48 ipl 2 225xyc1 at vme0 addr 0xee48 irq 2 vect 0x49 226xy* at xyc? drive ? 227 228## Memory-disk device. 229pseudo-device md 2 230 231#### Network interfaces. 232 233## Intel Ethernet (onboard, or Multibus/VME) 234ie0 at obio0 addr 0x7f0800 ipl 3 # 2/50 235ie0 at mbmem0 addr 0x88000 ipl 3 236ie1 at mbmem0 addr 0x8c000 ipl 3 237## VME: the first [addr,len] pair specifies the device registers; 238## the second pair specifies the on-board memory buffer 239ie1 at vme0 addr 0xe88000,0xe00000 len -1,0x40000 irq 3 vect 0x75 240 241## 3Com Ethernet (Multibus only) 242ec0 at mbmem0 addr 0xe0000 ipl 3 243ec1 at mbmem0 addr 0xe2000 ipl 3 244 245## Frame buffers. 246 247## Sun "bwtwo" black and white framebuffer. 248bwtwo0 at obmem0 addr 0x700000 # 2/120, 2/170 249bwtwo0 at obio0 addr 0x0 # 2/50 250 251## PROM console driver -- if all else fails 252pcons0 at mainbus0 # PROM console 253 254#### Miscellaneous. 255pseudo-device loop 1 # network loopback 256#pseudo-device bpfilter 8 # packet filter 257#pseudo-device bridge # simple inter-network bridging 258#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 259#pseudo-device sl 2 # CSLIP 260#pseudo-device ppp 2 # PPP 261#pseudo-device pppoe # PPP over Ethernet (RFC 2516) 262#pseudo-device tun 2 # network tunneling over tty 263#pseudo-device gre 2 # generic L3 over IP tunnel 264#pseudo-device ipfilter # ip filter 265#pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 266#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 267#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 268# rnd is EXPERIMENTAL 269#pseudo-device rnd # /dev/random and in-kernel generator 270 271pseudo-device pty 32 # pseudo-terminals 272#pseudo-device vnd 4 # paging to files 273#pseudo-device ccd 4 # concatenated disks 274#pseudo-device cgd 4 # cryptographic disk devices 275#pseudo-device raid 4 # RAIDframe disk driver 276#options RAID_AUTOCONFIG # auto-configuration of RAID components 277# Options to enable various other RAIDframe RAID types. 278# options RF_INCLUDE_EVENODD=1 279# options RF_INCLUDE_RAID5_RS=1 280# options RF_INCLUDE_PARITYLOGGING=1 281# options RF_INCLUDE_CHAINDECLUSTER=1 282# options RF_INCLUDE_INTERDECLUSTER=1 283# options RF_INCLUDE_PARITY_DECLUSTERING=1 284# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 285pseudo-device clockctl # user control of clock subsystem 286pseudo-device ksyms # /dev/ksyms 287#pseudo-device pf # PF packet filter 288#pseudo-device pflog # PF log if 289