1# $NetBSD: DISKLESS,v 1.56 2015/08/21 01:52:09 uebayasi Exp $ 2 3# DISKLESS Sun2 (2/120, 2/170, 2/50, ...) 4# Supports root on: ie0, ec0 5 6include "arch/sun2/conf/std.sun2" 7 8#options INCLUDE_CONFIG_FILE # embed config file in kernel binary 9 10#ident "DISKLESS-$Revision: 1.56 $" 11 12makeoptions COPTS="-Os" # optimize for size 13 14# Machines to be supported by this kernel 15#options FPU_EMULATE 16 17# Needs to be set per system. i.e change these as you see fit 18maxusers 4 19 20# Standard system options 21options KTRACE # system call tracing 22options SYSVMSG # System V message queues 23options SYSVSEM # System V semaphores 24options SYSVSHM # System V shared memory 25#options INSECURE # disable kernel security level 26#options USERCONF # userconf(4) support 27#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 28#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 29 30# Which kernel debugger? Uncomment either this: 31options DDB 32# ... or these for KGDB (gdb remote target) 33pseudo-device ksyms 34#makeoptions DEBUG="-g" # debugging symbols for gdb 35#options KGDB 36#options KGDB_DEV=0x0C00 # ttya=0C00 ttyb=0C01 37 38# Other debugging options 39#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 40#options DEBUG # kernel debugging code 41#options DIAGNOSTIC # extra kernel sanity checking 42#options PMAP_DEBUG 43#options SCSIDEBUG 44#options SCSIVERBOSE # Verbose SCSI errors 45 46# Compatibility options 47#options COMPAT_SUNOS # can run SunOS 4.1.1 executables 48#options COMPAT_43 # and 4.3BSD and ... 49options COMPAT_16 # NetBSD 1.6, 50options COMPAT_20 # NetBSD 2.0, 51options COMPAT_30 # NetBSD 3.0, 52options COMPAT_40 # NetBSD 4.0, 53options COMPAT_50 # NetBSD 5.0, 54options COMPAT_60 # NetBSD 6.0, and 55options COMPAT_70 # NetBSD 7.0 binary compatibility. 56#options COMPAT_AOUT_M68K # support for NetBSD a.out executables 57#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 58#options EXEC_AOUT # support for a.out executables 59options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 60 61# Filesystem options 62#file-system FFS # Berkeley Fast Filesystem 63file-system NFS # Sun NFS client support 64#file-system CD9660 # ISO 9660 + Rock Ridge file system 65#file-system FDESC # /dev/fd/* 66file-system KERNFS # /kern 67file-system NULLFS # loopback file system 68#file-system OVERLAY # overlay file system 69#file-system PROCFS # /proc 70#file-system UNION # union file system 71file-system MFS # memory-based filesystem 72file-system PTYFS # /dev/pts/N support 73 74#options NFSSERVER # nfs server support 75#options QUOTA # legacy UFS quotas 76#options QUOTA2 # new, in-filesystem UFS quotas 77#options FFS_EI # FFS Endian Independent support 78#options NFS_V2_ONLY # Exclude NFS3 code to save space 79 80# Networking options 81options INET # IP protocol stack support 82#options INET6 # IPV6 83#options IPSEC # IP security 84#options IPSEC_DEBUG # debug for IP security 85#options GATEWAY # IP packet forwarding 86#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 87 88# Work-around for root on slow servers (insurance...) 89options NFS_BOOT_RWSIZE=1024 90options NFS_BOOT_BOOTPARAM 91 92config netbsd root on ? type ? 93 94#### Main bus. 95mainbus0 at root 96 97#### Bus types. 98 99obio0 at mainbus? # all Sun-2 100obmem0 at mainbus? # all Sun-2 101mbmem0 at mainbus? # 2/120, 2/170 102mbio0 at mainbus? # 2/120, 2/170 103sun68kvme0 at mainbus? # 2/50, 2/130, 2/160 104vme0 at sun68kvme0 # mi VME attachment 105 106#### Standard system devices. 107 108## The AM9513 clock chip. 109clock0 at obio0 addr 0x002800 # 2/120, 2/170 110clock0 at obio0 addr 0x7f2800 # 2/50, 2/130, 2/160 111 112## The MM58167 time-of-day chip. 113tod0 at obio0 addr 0x003800 # 2/120, 2/170 114tod0 at vme0 addr 0x200800 # 2/50, 2/130, 2/160 115 116#### Serial port configuration. 117 118## Zilog 8530 serial chips. Each has two channels. 119## zs0 is ttya and ttyb. zs1 is the keyboard and mouse. 120## zs0 is REQUIRED to use KGDB. 121zs0 at obio0 addr 0x002000 # 2/120, 2/170 122zs0 at obio0 addr 0x7f2000 # 2/50 123zs1 at obmem0 addr 0x780000 # 2/120, 2/170 124zs1 at obio0 addr 0x7f1800 # 2/50 125#zs2 at mbmem0 addr 0x080800 # 2/120, 2/170 (first sc SCSI) 126#zs3 at mbmem0 addr 0x081000 # 2/120, 2/170 (first sc SCSI) 127#zs4 at mbmem0 addr 0x084800 # 2/120, 2/170 (second sc SCSI) 128#zs5 at mbmem0 addr 0x085000 # 2/120, 2/170 (second sc SCSI) 129zstty* at zs? channel ? # ttya 130kbd0 at zstty? # keyboard 131ms0 at zstty? # mouse 132 133#### Disk controllers and disks. 134 135## PAL+logic-based "Sun SCSI 2" Multibus/VME SCSI controller. 136## This driver has several flags which may be enabled using 137## the "flags" directive. Valid flags are: 138## 139## 0x0ff Set (1<<target) to disable parity checking 140## 0x100 Set this bit to disable DMA interrupts (poll) 141## 0x200 Set this bit to disable DMA entirely (use PIO) 142## 143## For example: "flags 0x10f" would disable DMA interrupts, 144## and disable parity for targets 0-3 145 146#sc0 at mbmem0 addr 0x80000 ipl 2 flags 0xff 147#sc0 at vme0 addr 0x200000 irq 2 vect 0x40 flags 0xff 148#sc1 at mbmem0 addr 0x84000 ipl 2 flags 0xff 149 150## NCR5380-based "Sun SCSI 3" VME SCSI controller. 151## This driver has several flags which may be enabled by OR'ing 152## the values and using the "flags" directive. 153## Valid flags are: 154## 155## 0x01 Use DMA (may be polled) 156## 0x02 Use DMA completion interrupts 157## 0x04 Allow disconnect/reselect 158## 159## E.g. the following would enable DMA, interrupts, and reselect: 160## si0 at vme0 addr 0x200000 ipl 3 vect 0x40 flags 0x07 161## 162## By default, DMA is enabled in the driver. 163 164#si0 at vme0 addr 0x200000 irq 2 vect 0x40 165 166## These entries find devices on all SCSI busses and assign 167## unit numbers dynamically. 168#scsibus* at sc? 169#scsibus* at si? 170#sd* at scsibus? target ? lun ? # SCSI disks 171#st* at scsibus? target ? lun ? # SCSI tapes 172#cd* at scsibus? target ? lun ? # SCSI CD-ROMs 173#ch* at scsibus? target ? lun ? # SCSI changer devices 174#ss* at scsibus? target ? lun ? # SCSI scanners 175#ses* at scsibus? target ? lun ? # SCSI SES/SAF-TE 176#uk* at scsibus? target ? lun ? # unknown SCSI 177 178# support old SCSI devices that don't understand the INQUIRY command 179#options SCSI_OLD_NOINQUIRY 180 181## Xylogics 450 or 451 Multibus/VME SMD disk controllers and disks. 182#xyc0 at mbio0 addr 0xee40 ipl 2 183#xyc0 at vme0 addr 0xee40 irq 2 vect 0x48 184#xyc1 at mbio0 addr 0xee48 ipl 2 185#xyc1 at vme0 addr 0xee48 irq 2 vect 0x49 186#xy* at xyc? drive ? 187 188## Memory-disk device. 189pseudo-device md 190 191#### Network interfaces. 192 193## Intel Ethernet (onboard, or Multibus/VME) 194ie0 at obio0 addr 0x7f0800 ipl 3 # 2/50 195ie0 at mbmem0 addr 0x88000 ipl 3 196ie1 at mbmem0 addr 0x8c000 ipl 3 197## VME: the first [addr,len] pair specifies the device registers; 198## the second pair specifies the on-board memory buffer 199ie1 at vme0 addr 0xe88000,0xe00000 len -1,0x40000 irq 3 vect 0x75 200 201## 3Com Ethernet (Multibus only) 202ec0 at mbmem0 addr 0xe0000 ipl 3 203ec1 at mbmem0 addr 0xe2000 ipl 3 204# limit NFS R/W size for poor ec(4) interfaces 205options NFS_RSIZE=1024,NFS_WSIZE=1024 206 207## Frame buffers. 208 209## Sun "bwtwo" black and white framebuffer. 210bwtwo0 at obmem0 addr 0x700000 # 2/120, 2/170 211bwtwo0 at obio0 addr 0x0 # 2/50 212 213## PROM console driver -- if all else fails 214pcons0 at mainbus0 # PROM console 215 216#### Miscellaneous. 217pseudo-device loop # network loopback 218#pseudo-device bpfilter # packet filter 219#pseudo-device sl # CSLIP 220#pseudo-device ppp # PPP 221#pseudo-device tun # network tunneling over tty 222#pseudo-device gre # generic L3 over IP tunnel 223#pseudo-device ipfilter # ip filter 224#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 225#pseudo-device faith # IPv[46] tcp relay translation i/f 226#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 227 228pseudo-device pty # pseudo-terminals 229#pseudo-device vnd # paging to files 230#pseudo-device ccd # concatenated disks 231#pseudo-device raid # RAIDframe disk driver 232#options RAID_AUTOCONFIG # auto-configuration of RAID components 233#pseudo-device fss # file system snapshot device 234 235#pseudo-device clockctl # user control of clock subsystem 236