1 /* $NetBSD: esp_obio.c,v 1.11 2002/03/11 16:27:02 pk Exp $ */ 2 3 /*- 4 * Copyright (c) 1997, 1998 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Charles M. Hannum; Jason R. Thorpe of the Numerical Aerospace 9 * Simulation Facility, NASA Ames Research Center; Paul Kranenburg. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. All advertising materials mentioning features or use of this software 20 * must display the following acknowledgement: 21 * This product includes software developed by the NetBSD 22 * Foundation, Inc. and its contributors. 23 * 4. Neither the name of The NetBSD Foundation nor the names of its 24 * contributors may be used to endorse or promote products derived 25 * from this software without specific prior written permission. 26 * 27 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 28 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 29 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 31 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 32 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 33 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 34 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 35 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 36 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 37 * POSSIBILITY OF SUCH DAMAGE. 38 */ 39 40 #include <sys/types.h> 41 #include <sys/param.h> 42 #include <sys/systm.h> 43 #include <sys/kernel.h> 44 #include <sys/errno.h> 45 #include <sys/device.h> 46 #include <sys/buf.h> 47 48 #include <dev/scsipi/scsi_all.h> 49 #include <dev/scsipi/scsipi_all.h> 50 #include <dev/scsipi/scsiconf.h> 51 #include <dev/scsipi/scsi_message.h> 52 53 #include <machine/bus.h> 54 #include <machine/autoconf.h> 55 #include <machine/intr.h> 56 57 #include <dev/ic/lsi64854reg.h> 58 #include <dev/ic/lsi64854var.h> 59 60 #include <dev/ic/ncr53c9xreg.h> 61 #include <dev/ic/ncr53c9xvar.h> 62 63 #include <dev/sbus/sbusvar.h> 64 65 struct esp_softc { 66 struct ncr53c9x_softc sc_ncr53c9x; /* glue to MI code */ 67 bus_space_tag_t sc_bustag; 68 bus_dma_tag_t sc_dmatag; 69 bus_space_handle_t sc_reg; /* the registers */ 70 struct lsi64854_softc *sc_dma; /* pointer to my dma */ 71 }; 72 73 74 void espattach_obio __P((struct device *, struct device *, void *)); 75 int espmatch_obio __P((struct device *, struct cfdata *, void *)); 76 77 /* Linkup to the rest of the kernel */ 78 struct cfattach esp_obio_ca = { 79 sizeof(struct esp_softc), espmatch_obio, espattach_obio 80 }; 81 82 /* 83 * Functions and the switch for the MI code. 84 */ 85 static u_char esp_read_reg __P((struct ncr53c9x_softc *, int)); 86 static void esp_write_reg __P((struct ncr53c9x_softc *, int, u_char)); 87 static int esp_dma_isintr __P((struct ncr53c9x_softc *)); 88 static void esp_dma_reset __P((struct ncr53c9x_softc *)); 89 static int esp_dma_intr __P((struct ncr53c9x_softc *)); 90 static int esp_dma_setup __P((struct ncr53c9x_softc *, caddr_t *, 91 size_t *, int, size_t *)); 92 static void esp_dma_go __P((struct ncr53c9x_softc *)); 93 static void esp_dma_stop __P((struct ncr53c9x_softc *)); 94 static int esp_dma_isactive __P((struct ncr53c9x_softc *)); 95 96 static struct ncr53c9x_glue esp_obio_glue = { 97 esp_read_reg, 98 esp_write_reg, 99 esp_dma_isintr, 100 esp_dma_reset, 101 esp_dma_intr, 102 esp_dma_setup, 103 esp_dma_go, 104 esp_dma_stop, 105 esp_dma_isactive, 106 NULL, /* gl_clear_latched_intr */ 107 }; 108 109 int 110 espmatch_obio(parent, cf, aux) 111 struct device *parent; 112 struct cfdata *cf; 113 void *aux; 114 { 115 union obio_attach_args *uoba = aux; 116 struct obio4_attach_args *oba; 117 118 if (uoba->uoba_isobio4 == 0) 119 return (0); 120 121 oba = &uoba->uoba_oba4; 122 return (bus_space_probe(oba->oba_bustag, oba->oba_paddr, 123 1, /* probe size */ 124 0, /* offset */ 125 0, /* flags */ 126 NULL, NULL)); 127 } 128 129 void 130 espattach_obio(parent, self, aux) 131 struct device *parent, *self; 132 void *aux; 133 { 134 union obio_attach_args *uoba = aux; 135 struct obio4_attach_args *oba = &uoba->uoba_oba4; 136 struct esp_softc *esc = (void *)self; 137 struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x; 138 139 esc->sc_bustag = oba->oba_bustag; 140 esc->sc_dmatag = oba->oba_dmatag; 141 142 sc->sc_id = 7; 143 sc->sc_freq = 24000000; 144 145 /* 146 * Find the DMA by poking around the dma device structures 147 */ 148 esc->sc_dma = (struct lsi64854_softc *) 149 getdevunit("dma", sc->sc_dev.dv_unit); 150 151 /* 152 * and a back pointer to us, for DMA 153 */ 154 if (esc->sc_dma) 155 esc->sc_dma->sc_client = sc; 156 else { 157 printf("\n"); 158 panic("espattach: no dma found"); 159 } 160 161 if (bus_space_map(oba->oba_bustag, oba->oba_paddr, 162 16, /* size (of ncr53c9xreg) */ 163 BUS_SPACE_MAP_LINEAR, 164 &esc->sc_reg) != 0) { 165 printf("%s @ obio: cannot map registers\n", self->dv_xname); 166 return; 167 } 168 169 /* 170 * Set up glue for MI code early; we use some of it here. 171 */ 172 sc->sc_glue = &esp_obio_glue; 173 174 /* gimme Mhz */ 175 sc->sc_freq /= 1000000; 176 177 /* 178 * XXX More of this should be in ncr53c9x_attach(), but 179 * XXX should we really poke around the chip that much in 180 * XXX the MI code? Think about this more... 181 */ 182 183 /* 184 * It is necessary to try to load the 2nd config register here, 185 * to find out what rev the esp chip is, else the ncr53c9x_reset 186 * will not set up the defaults correctly. 187 */ 188 sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB; 189 sc->sc_cfg2 = NCRCFG2_SCSI2 | NCRCFG2_RPE; 190 sc->sc_cfg3 = NCRCFG3_CDB; 191 NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2); 192 193 if ((NCR_READ_REG(sc, NCR_CFG2) & ~NCRCFG2_RSVD) != 194 (NCRCFG2_SCSI2 | NCRCFG2_RPE)) { 195 sc->sc_rev = NCR_VARIANT_ESP100; 196 } else { 197 sc->sc_cfg2 = NCRCFG2_SCSI2; 198 NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2); 199 sc->sc_cfg3 = 0; 200 NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3); 201 sc->sc_cfg3 = (NCRCFG3_CDB | NCRCFG3_FCLK); 202 NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3); 203 if (NCR_READ_REG(sc, NCR_CFG3) != 204 (NCRCFG3_CDB | NCRCFG3_FCLK)) { 205 sc->sc_rev = NCR_VARIANT_ESP100A; 206 } else { 207 /* NCRCFG2_FE enables > 64K transfers */ 208 sc->sc_cfg2 |= NCRCFG2_FE; 209 sc->sc_cfg3 = 0; 210 NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3); 211 sc->sc_rev = NCR_VARIANT_ESP200; 212 } 213 } 214 215 /* 216 * XXX minsync and maxxfer _should_ be set up in MI code, 217 * XXX but it appears to have some dependency on what sort 218 * XXX of DMA we're hooked up to, etc. 219 */ 220 221 /* 222 * This is the value used to start sync negotiations 223 * Note that the NCR register "SYNCTP" is programmed 224 * in "clocks per byte", and has a minimum value of 4. 225 * The SCSI period used in negotiation is one-fourth 226 * of the time (in nanoseconds) needed to transfer one byte. 227 * Since the chip's clock is given in MHz, we have the following 228 * formula: 4 * period = (1000 / freq) * 4 229 */ 230 sc->sc_minsync = 1000 / sc->sc_freq; 231 232 /* 233 * Alas, we must now modify the value a bit, because it's 234 * only valid when can switch on FASTCLK and FASTSCSI bits 235 * in config register 3... 236 */ 237 switch (sc->sc_rev) { 238 case NCR_VARIANT_ESP100: 239 sc->sc_maxxfer = 64 * 1024; 240 sc->sc_minsync = 0; /* No synch on old chip? */ 241 break; 242 243 case NCR_VARIANT_ESP100A: 244 sc->sc_maxxfer = 64 * 1024; 245 /* Min clocks/byte is 5 */ 246 sc->sc_minsync = ncr53c9x_cpb2stp(sc, 5); 247 break; 248 249 case NCR_VARIANT_ESP200: 250 sc->sc_maxxfer = 16 * 1024 * 1024; 251 /* XXX - do actually set FAST* bits */ 252 break; 253 } 254 255 /* Establish interrupt channel */ 256 bus_intr_establish(esc->sc_bustag, oba->oba_pri, IPL_BIO, 0, 257 ncr53c9x_intr, sc); 258 259 /* register interrupt stats */ 260 evcnt_attach_dynamic(&sc->sc_intrcnt, EVCNT_TYPE_INTR, NULL, 261 sc->sc_dev.dv_xname, "intr"); 262 263 /* Do the common parts of attachment. */ 264 sc->sc_adapter.adapt_minphys = minphys; 265 sc->sc_adapter.adapt_request = ncr53c9x_scsipi_request; 266 ncr53c9x_attach(sc); 267 sc->sc_features |= NCR_F_DMASELECT; 268 } 269 270 /* 271 * Glue functions. 272 */ 273 274 u_char 275 esp_read_reg(sc, reg) 276 struct ncr53c9x_softc *sc; 277 int reg; 278 { 279 struct esp_softc *esc = (struct esp_softc *)sc; 280 281 return (bus_space_read_1(esc->sc_bustag, esc->sc_reg, reg * 4)); 282 } 283 284 void 285 esp_write_reg(sc, reg, v) 286 struct ncr53c9x_softc *sc; 287 int reg; 288 u_char v; 289 { 290 struct esp_softc *esc = (struct esp_softc *)sc; 291 292 bus_space_write_1(esc->sc_bustag, esc->sc_reg, reg * 4, v); 293 } 294 295 int 296 esp_dma_isintr(sc) 297 struct ncr53c9x_softc *sc; 298 { 299 struct esp_softc *esc = (struct esp_softc *)sc; 300 301 return (DMA_ISINTR(esc->sc_dma)); 302 } 303 304 void 305 esp_dma_reset(sc) 306 struct ncr53c9x_softc *sc; 307 { 308 struct esp_softc *esc = (struct esp_softc *)sc; 309 310 DMA_RESET(esc->sc_dma); 311 } 312 313 int 314 esp_dma_intr(sc) 315 struct ncr53c9x_softc *sc; 316 { 317 struct esp_softc *esc = (struct esp_softc *)sc; 318 319 return (DMA_INTR(esc->sc_dma)); 320 } 321 322 int 323 esp_dma_setup(sc, addr, len, datain, dmasize) 324 struct ncr53c9x_softc *sc; 325 caddr_t *addr; 326 size_t *len; 327 int datain; 328 size_t *dmasize; 329 { 330 struct esp_softc *esc = (struct esp_softc *)sc; 331 332 return (DMA_SETUP(esc->sc_dma, addr, len, datain, dmasize)); 333 } 334 335 void 336 esp_dma_go(sc) 337 struct ncr53c9x_softc *sc; 338 { 339 struct esp_softc *esc = (struct esp_softc *)sc; 340 341 DMA_GO(esc->sc_dma); 342 } 343 344 void 345 esp_dma_stop(sc) 346 struct ncr53c9x_softc *sc; 347 { 348 struct esp_softc *esc = (struct esp_softc *)sc; 349 u_int32_t csr; 350 351 csr = L64854_GCSR(esc->sc_dma); 352 csr &= ~D_EN_DMA; 353 L64854_SCSR(esc->sc_dma, csr); 354 } 355 356 int 357 esp_dma_isactive(sc) 358 struct ncr53c9x_softc *sc; 359 { 360 struct esp_softc *esc = (struct esp_softc *)sc; 361 362 return (DMA_ISACTIVE(esc->sc_dma)); 363 } 364