1 /* $NetBSD: pci_gio.c,v 1.11 2012/10/27 17:18:09 chs Exp $ */ 2 3 /* 4 * Copyright (c) 2006 Stephen M. Rumble 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. The name of the author may not be used to endorse or promote products 13 * derived from this software without specific prior written permission. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __KERNEL_RCSID(0, "$NetBSD: pci_gio.c,v 1.11 2012/10/27 17:18:09 chs Exp $"); 29 30 /* 31 * Glue for PCI devices that are connected to the GIO bus by various little 32 * GIO<->PCI ASICs. 33 * 34 * We presently support the following boards: 35 * o Phobos G100/G130/G160 (if_tlp, lxtphy) 36 * o Set Engineering GFE (if_tl, nsphy) 37 */ 38 39 #include "opt_pci.h" 40 #include "pci.h" 41 42 #include <sys/param.h> 43 #include <sys/systm.h> 44 #include <sys/device.h> 45 #include <sys/malloc.h> 46 #include <sys/extent.h> 47 48 #include <sys/bus.h> 49 #include <machine/machtype.h> 50 51 #include <sgimips/gio/giovar.h> 52 #include <sgimips/gio/gioreg.h> 53 #include <sgimips/gio/giodevs.h> 54 55 #include <sgimips/dev/imcvar.h> 56 57 #include <mips/cache.h> 58 59 #include <dev/pci/pcivar.h> 60 #include <dev/pci/pcireg.h> 61 #include <dev/pci/pcidevs.h> 62 #include <dev/pci/pciconf.h> 63 64 int giopci_debug = 0; 65 #define DPRINTF(_x) if (giopci_debug) printf _x 66 67 struct giopci_softc { 68 struct sgimips_pci_chipset sc_pc; 69 int sc_slot; 70 int sc_gprid; 71 uint32_t sc_pci_len; 72 bus_space_tag_t sc_iot; 73 bus_space_handle_t sc_ioh; 74 }; 75 76 static int giopci_match(device_t, cfdata_t, void *); 77 static void giopci_attach(device_t, device_t, void *); 78 static int giopci_bus_maxdevs(pci_chipset_tag_t, int); 79 static pcireg_t giopci_conf_read(pci_chipset_tag_t, pcitag_t, int); 80 static void giopci_conf_write(pci_chipset_tag_t, pcitag_t, int, pcireg_t); 81 static int giopci_conf_hook(pci_chipset_tag_t, int, int, int, pcireg_t); 82 static int giopci_intr_map(const struct pci_attach_args *, 83 pci_intr_handle_t *); 84 static const char * 85 giopci_intr_string(pci_chipset_tag_t, pci_intr_handle_t); 86 static void *giopci_intr_establish(int, int, int (*)(void *), void *); 87 static void giopci_intr_disestablish(void *); 88 89 #define PHOBOS_PCI_OFFSET 0x00100000 90 #define PHOBOS_PCI_LENGTH 128 /* ~arbitrary */ 91 #define PHOBOS_TULIP_START 0x00101000 92 #define PHOBOS_TULIP_END 0x001fffff 93 94 #define SETENG_MAGIC_OFFSET 0x00020000 95 #define SETENG_MAGIC_VALUE 0x00001000 96 #define SETENG_PCI_OFFSET 0x00080000 97 #define SETENG_PCI_LENGTH 128 /* ~arbitrary */ 98 #define SETENG_TLAN_START 0x00100000 99 #define SETENG_TLAN_END 0x001fffff 100 101 CFATTACH_DECL_NEW(giopci, sizeof(struct giopci_softc), 102 giopci_match, giopci_attach, NULL, NULL); 103 104 static int 105 giopci_match(device_t parent, cfdata_t match, void *aux) 106 { 107 struct gio_attach_args *ga = aux; 108 int gprid; 109 110 /* 111 * I think that these cards are all GIO32-bis or GIO64. Thus 112 * they work in either Indigo2/Challenge M or 113 * Indy/Challenge S/Indigo R4k, according to form factor. However, 114 * there are some exceptions (e.g. my Indigo R4k won't power 115 * on with the Set Engineering card installed). 116 */ 117 if (mach_type != MACH_SGI_IP20 && mach_type != MACH_SGI_IP22) 118 return (0); 119 120 gprid = GIO_PRODUCT_PRODUCTID(ga->ga_product); 121 if (gprid == PHOBOS_G100 || gprid == PHOBOS_G130 || 122 gprid == PHOBOS_G160 || gprid == SETENG_GFE) 123 return (1); 124 125 return (0); 126 } 127 128 static void 129 giopci_attach(device_t parent, device_t self, void *aux) 130 { 131 struct giopci_softc *sc = device_private(self); 132 pci_chipset_tag_t pc = &sc->sc_pc; 133 struct gio_attach_args *ga = aux; 134 uint32_t pci_off, pci_len, arb; 135 struct pcibus_attach_args pba; 136 u_long m_start, m_end; 137 #ifdef PCI_NETBSD_CONFIGURE 138 extern int pci_conf_debug; 139 140 pci_conf_debug = giopci_debug; 141 #endif 142 143 sc->sc_iot = ga->ga_iot; 144 sc->sc_slot = ga->ga_slot; 145 sc->sc_gprid = GIO_PRODUCT_PRODUCTID(ga->ga_product); 146 147 if (mach_type == MACH_SGI_IP22 && 148 mach_subtype == MACH_SGI_IP22_FULLHOUSE) 149 arb = GIO_ARB_RT | GIO_ARB_MST | GIO_ARB_PIPE; 150 else 151 arb = GIO_ARB_RT | GIO_ARB_MST; 152 153 if (gio_arb_config(ga->ga_slot, arb)) { 154 printf(": failed to configure GIO bus arbiter\n"); 155 return; 156 } 157 158 #if (NIMC > 0) 159 imc_disable_sysad_parity(); 160 #endif 161 162 switch (sc->sc_gprid) { 163 case PHOBOS_G100: 164 case PHOBOS_G130: 165 case PHOBOS_G160: 166 pci_off = PHOBOS_PCI_OFFSET; 167 pci_len = PHOBOS_PCI_LENGTH; 168 m_start = MIPS_KSEG1_TO_PHYS(ga->ga_addr + PHOBOS_TULIP_START); 169 m_end = MIPS_KSEG1_TO_PHYS(ga->ga_addr + PHOBOS_TULIP_END); 170 break; 171 172 case SETENG_GFE: 173 /* 174 * NB: The SetEng board does not allow the ThunderLAN's DMA 175 * engine to properly transfer segments that span page 176 * boundaries. See sgimips/autoconf.c where we catch a 177 * tl(4) device attachment and create an appropriate 178 * proplib entry to enable the workaround. 179 */ 180 pci_off = SETENG_PCI_OFFSET; 181 pci_len = SETENG_PCI_LENGTH; 182 m_start = MIPS_KSEG1_TO_PHYS(ga->ga_addr + SETENG_TLAN_START); 183 m_end = MIPS_KSEG1_TO_PHYS(ga->ga_addr + SETENG_TLAN_END); 184 bus_space_write_4(ga->ga_iot, ga->ga_ioh, 185 SETENG_MAGIC_OFFSET, SETENG_MAGIC_VALUE); 186 break; 187 188 default: 189 panic("giopci_attach: unsupported GIO product id 0x%02x", 190 sc->sc_gprid); 191 } 192 193 if (bus_space_subregion(ga->ga_iot, ga->ga_ioh, pci_off, pci_len, 194 &sc->sc_ioh)) { 195 printf("%s: unable to map PCI registers\n", device_xname(self)); 196 return; 197 } 198 sc->sc_pci_len = pci_len; 199 200 pc->pc_bus_maxdevs = giopci_bus_maxdevs; 201 pc->pc_conf_read = giopci_conf_read; 202 pc->pc_conf_write = giopci_conf_write; 203 pc->pc_conf_hook = giopci_conf_hook; 204 pc->pc_intr_map = giopci_intr_map; 205 pc->pc_intr_string = giopci_intr_string; 206 pc->intr_establish = giopci_intr_establish; 207 pc->intr_disestablish = giopci_intr_disestablish; 208 pc->iot = ga->ga_iot; 209 pc->ioh = ga->ga_ioh; 210 pc->cookie = sc; 211 212 printf(": %s\n", gio_product_string(sc->sc_gprid)); 213 214 #ifdef PCI_NETBSD_CONFIGURE 215 pc->pc_memext = extent_create("giopcimem", m_start, m_end, 216 NULL, 0, EX_NOWAIT); 217 pci_configure_bus(pc, NULL, pc->pc_memext, NULL, 0, 218 mips_cache_info.mci_dcache_align); 219 #endif 220 221 memset(&pba, 0, sizeof(pba)); 222 pba.pba_memt = SGIMIPS_BUS_SPACE_MEM; 223 pba.pba_dmat = ga->ga_dmat; 224 pba.pba_pc = pc; 225 pba.pba_flags = PCI_FLAGS_MEM_OKAY; 226 /* NB: do not set PCI_FLAGS_{MRL,MRM,MWI}_OKAY -- true ?! */ 227 228 config_found_ia(self, "pcibus", &pba, pcibusprint); 229 } 230 231 static int 232 giopci_bus_maxdevs(pci_chipset_tag_t pc, int busno) 233 { 234 235 return (busno == 0); 236 } 237 238 static pcireg_t 239 giopci_conf_read(pci_chipset_tag_t pc, pcitag_t tag, int reg) 240 { 241 struct giopci_softc *sc = pc->cookie; 242 int bus, dev, func; 243 pcireg_t data; 244 245 pci_decompose_tag(pc, tag, &bus, &dev, &func); 246 if (bus != 0 || dev != 0 || func != 0) 247 return (0); 248 249 /* XXX - should just use bus_space_peek */ 250 if (reg >= sc->sc_pci_len) { 251 DPRINTF(("giopci_conf_read: reg 0x%x out of bounds\n", reg)); 252 return (0); 253 } 254 255 DPRINTF(("giopci_conf_read: reg 0x%x = 0x", reg)); 256 data = bus_space_read_4(sc->sc_iot, sc->sc_ioh, reg); 257 DPRINTF(("%08x\n", data)); 258 259 return (data); 260 } 261 262 static void 263 giopci_conf_write(pci_chipset_tag_t pc, pcitag_t tag, int reg, pcireg_t data) 264 { 265 struct giopci_softc *sc = pc->cookie; 266 int bus, dev, func; 267 268 pci_decompose_tag(pc, tag, &bus, &dev, &func); 269 if (bus != 0 || dev != 0 || func != 0) 270 return; 271 272 /* XXX - should just use bus_space_poke */ 273 if (reg >= sc->sc_pci_len) { 274 DPRINTF(("giopci_conf_write: reg 0x%x out of bounds " 275 "(val = 0x%08x)\n", reg, data)); 276 return; 277 } 278 279 DPRINTF(("giopci_conf_write: reg 0x%x = 0x%08x\n", reg, data)); 280 bus_space_write_4(sc->sc_iot, sc->sc_ioh, reg, data); 281 } 282 283 static int 284 giopci_conf_hook(pci_chipset_tag_t pc, int bus, int device, int function, 285 pcireg_t id) 286 { 287 288 /* All devices use memory accesses only. */ 289 return (PCI_CONF_MAP_MEM | PCI_CONF_ENABLE_MEM | PCI_CONF_ENABLE_BM); 290 } 291 292 static int 293 giopci_intr_map(const struct pci_attach_args *pa, pci_intr_handle_t *ihp) 294 { 295 struct giopci_softc *sc = pa->pa_pc->cookie; 296 297 *ihp = sc->sc_slot; 298 299 return (0); 300 } 301 302 static const char * 303 giopci_intr_string(pci_chipset_tag_t pc, pci_intr_handle_t ih) 304 { 305 static char str[10]; 306 307 snprintf(str, sizeof(str), "slot %s", 308 (ih == GIO_SLOT_EXP0) ? "EXP0" : 309 (ih == GIO_SLOT_EXP1) ? "EXP1" : "GFX"); 310 return (str); 311 } 312 313 static void * 314 giopci_intr_establish(int slot, int level, int (*func)(void *), void *arg) 315 { 316 317 return (gio_intr_establish(slot, level, func, arg)); 318 } 319 320 static void 321 giopci_intr_disestablish(void *cookie) 322 { 323 324 panic("giopci_intr_disestablish: impossible."); 325 } 326