1# $NetBSD: GENERIC,v 1.12 2010/04/16 13:48:35 pooka Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21include "arch/rs6000/conf/std.rs6000" 22 23options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25#makeoptions COPTS="-O2 -mno-powerpc -mno-power" # wheeee 26 27#ident "GENERIC-$Revision: 1.12 $" 28 29maxusers 32 30 31# Platform support 32 33options PIC_IOCC 34 35# Standard system options 36 37options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 38options NTP # NTP phase/frequency locked loop 39 40options KTRACE # system call tracing via ktrace(1) 41 42options SYSVMSG # System V-like message queues 43options SYSVSEM # System V-like semaphores 44#options SEMMNI=10 # number of semaphore identifiers 45#options SEMMNS=60 # number of semaphores in system 46#options SEMUME=10 # max number of undo entries per process 47#options SEMMNU=30 # number of undo structures in system 48options SYSVSHM # System V-like memory sharing 49options P1003_1B_SEMAPHORE # p1003.1b semaphore support 50 51 52options USERCONF # userconf(4) support 53#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 54options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 55 56# Enable experimental buffer queue strategy for better responsiveness under 57# high disk I/O load. Use it with caution - it's not proven to be stable yet. 58#options BUFQ_READPRIO 59#options BUFQ_PRIOCSCAN 60 61# Diagnostic/debugging support options 62#options DIAGNOSTIC # cheap kernel consistency checks 63options DEBUG # expensive debugging checks/support 64options PMAPDEBUG 65#options KMEMSTATS # kernel memory statistics (vmstat -m) 66options DDB # in-kernel debugger 67#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 68#makeoptions DEBUG="-g" 69 70# Compatibility options 71#options COMPAT_13 # NetBSD 1.3, 72#options COMPAT_14 # NetBSD 1.4, 73#options COMPAT_15 # NetBSD 1.5, 74#options COMPAT_16 # NetBSD 1.6, 75#options COMPAT_20 # NetBSD 2.0, 76#options COMPAT_30 # NetBSD 3.0, 77#options COMPAT_40 # NetBSD 4.0 compatibility. 78options COMPAT_50 # NetBSD 5.0 compatibility. 79options COMPAT_43 # and 4.3BSD 80#options COMPAT_LINUX # Linux binary compatibility 81#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 82options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 83 84# File systems 85file-system FFS # UFS 86file-system EXT2FS # second extended file system (linux) 87#file-system LFS # log-structured file system 88file-system MFS # memory file system 89file-system NFS # Network File System client 90#file-system NTFS # Windows/NT file system (experimental) 91file-system CD9660 # ISO 9660 + Rock Ridge file system 92file-system MSDOSFS # MS-DOS file system 93#file-system FDESC # /dev/fd 94file-system KERNFS # /kern 95file-system NULLFS # loopback file system 96#file-system OVERLAY # overlay file system 97file-system PROCFS # /proc 98#file-system UMAPFS # NULLFS + uid and gid remapping 99file-system UNION # union file system 100#file-system CODA # Coda File System; also needs vcoda (below) 101file-system PTYFS # /dev/pts/N support 102#file-system TMPFS # experimental - Efficient memory file-system 103#file-system UDF # experimental - OSTA UDF CD/DVD file-system 104 105# File system options 106options QUOTA # UFS quotas 107#options FFS_EI # FFS Endian Independant support 108options WAPBL # File system journaling support - Experimental 109#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 110options NFSSERVER # Network File System server 111#options FFS_NO_SNAPSHOT # No FFS snapshot support 112#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 113 # immutable) behave as system flags. 114 115# Networking options 116#options GATEWAY # packet forwarding 117options INET # IP + ICMP + TCP + UDP 118options INET6 # IPv6 119#options IPSEC # IP security 120#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 121#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 122#options IPSEC_DEBUG # debug for IP security 123#options MROUTING # IP multicast routing 124#options PIM # Protocol Independent Multicast 125#options NETATALK # AppleTalk networking protocols 126options PPP_BSDCOMP # BSD-Compress compression support for PPP 127options PPP_DEFLATE # Deflate compression support for PPP 128options PPP_FILTER # Active filter support for PPP (requires bpf) 129options PFIL_HOOKS # pfil(9) packet filter hooks 130options IPFILTER_LOG # ipmon(8) log support 131#options IPFILTER_DEFAULT_BLOCK # block all packets by default 132#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 133 134#options ALTQ # Manipulate network interfaces' output queues 135#options ALTQ_BLUE # Stochastic Fair Blue 136#options ALTQ_CBQ # Class-Based Queueing 137#options ALTQ_CDNR # Diffserv Traffic Conditioner 138#options ALTQ_FIFOQ # First-In First-Out Queue 139#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 140#options ALTQ_HFSC # Hierarchical Fair Service Curve 141#options ALTQ_LOCALQ # Local queueing discipline 142#options ALTQ_PRIQ # Priority Queueing 143#options ALTQ_RED # Random Early Detection 144#options ALTQ_RIO # RED with IN/OUT 145#options ALTQ_WFQ # Weighted Fair Queueing 146 147# These options enable verbose messages for several subsystems. 148# Warning, these may compile large string tables into the kernel! 149#options MIIVERBOSE # verbose PHY autoconfig messages 150options SCSIVERBOSE # human readable SCSI error messages 151options MCAVERBOSE # verbose MCA device autoconfig messages 152 153#options NFS_BOOT_BOOTP 154options NFS_BOOT_BOOTPARAM 155options NFS_BOOT_DHCP 156 157# 158# wscons options 159# 160# builtin terminal emulations 161options WSEMUL_VT100 # VT100 / VT220 emulation 162# different kernel output - see dev/wscons/wsdisplayvar.h 163options WS_KERNEL_FG=WSCOL_GREEN 164#options WS_KERNEL_BG=WSCOL_BLACK 165# see dev/pckbport/wskbdmap_mfii.c for implemented layouts 166#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 167# allocate a number of virtual screens at autoconfiguration time 168#options WSDISPLAY_DEFAULTSCREENS=4 169# use a large software cursor that doesn't blink 170options PCDISPLAY_SOFTCURSOR 171 172# Kernel root file system and dump configuration. 173config netbsd root on ? type ? 174#config netbsd root on tlp0 type nfs 175#config netbsd root on pcn0 type nfs 176 177 178# 179# Device configuration 180# 181 182mainbus0 at root 183cpu0 at mainbus0 184mca0 at mainbus0 185 186com* at mca? slot ? 187 188# I/O Planar 189ioplanar* at mca? slot ? 190 191# I/O Planar devices 192com* at ioplanar? 193 194# Basic Bus Support 195 196# SCSI devices 197#sd* at scsibus? target ? lun ? # SCSI disk drives 198#st* at scsibus? target ? lun ? # SCSI tape drives 199#cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 200#ch* at scsibus? target ? lun ? # SCSI autochangers 201#ss* at scsibus? target ? lun ? # SCSI scanners 202#uk* at scsibus? target ? lun ? # SCSI unknown 203 204# Pull in optional local configuration 205cinclude "arch/rs6000/conf/GENERIC.local" 206 207# Pseudo-Devices 208 209# Not yet ready -- prep lacks generic soft interrupts 210#pseudo-device crypto # /dev/crypto device 211#pseudo-device swcrypto # software crypto implementation 212 213# disk/mass storage pseudo-devices 214#pseudo-device ccd 4 # concatenated/striped disk devices 215#pseudo-device cgd 4 # cryptographic disk devices 216#pseudo-device raid 8 # RAIDframe disk driver 217#options RAID_AUTOCONFIG # auto-configuration of RAID components 218# Options to enable various other RAIDframe RAID types. 219# options RF_INCLUDE_EVENODD=1 220# options RF_INCLUDE_RAID5_RS=1 221# options RF_INCLUDE_PARITYLOGGING=1 222# options RF_INCLUDE_CHAINDECLUSTER=1 223# options RF_INCLUDE_INTERDECLUSTER=1 224# options RF_INCLUDE_PARITY_DECLUSTERING=1 225# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 226pseudo-device fss # file system snapshot device 227pseudo-device md 1 # memory disk device (ramdisk) 228pseudo-device vnd # disk-like interface to files 229#options VND_COMPRESSION # compressed vnd(4) 230 231# network pseudo-devices 232pseudo-device loop # network loopback 233pseudo-device bpfilter # Berkeley packet filter 234#pseudo-device carp # Common Address Redundancy Protocol 235pseudo-device ipfilter # IP filter (firewall) and NAT 236pseudo-device ppp # Point-to-Point Protocol 237pseudo-device pppoe # PPP over Ethernet (RFC 2516) 238#pseudo-device sl # Serial Line IP 239pseudo-device strip # Starmode Radio IP (Metricom) 240pseudo-device tun # network tunneling over tty 241pseudo-device tap # virtual Ethernet 242pseudo-device gre # generic L3 over IP tunnel 243pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 244#pseudo-device faith # IPv[46] tcp relay translation i/f 245pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 246pseudo-device vlan # IEEE 802.1q encapsulation 247pseudo-device bridge # simple inter-network bridging 248#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 249 250# 251# accept filters 252pseudo-device accf_data # "dataready" accept filter 253pseudo-device accf_http # "httpready" accept filter 254 255# miscellaneous pseudo-devices 256pseudo-device pty # pseudo-terminals 257#pseudo-device sequencer 1 # MIDI sequencer 258pseudo-device rnd # /dev/random and in-kernel generator 259#options RND_COM # use "com" randomness as well 260pseudo-device clockctl # user control of clock subsystem 261pseudo-device ksyms # /dev/ksyms 262#pseudo-device pf # PF packet filter 263#pseudo-device pflog # PF log if 264 265# a pseudo device needed for Coda # also needs CODA (above) 266#pseudo-device vcoda 4 # coda minicache <-> venus comm. 267 268# wscons pseudo-devices 269pseudo-device wsmux # mouse & keyboard multiplexor 270pseudo-device wsfont 271 272# Veriexec 273#options VERIFIED_EXEC 274# 275# a pseudo device needed for veriexec 276#pseudo-device veriexec 1 277# 278# Uncomment the fingerprint methods below that are desired. Note that 279# removing fingerprint methods will have almost no impact on the kernel 280# code size. 281# 282#options VERIFIED_EXEC_FP_RMD160 283#options VERIFIED_EXEC_FP_SHA256 284#options VERIFIED_EXEC_FP_SHA384 285#options VERIFIED_EXEC_FP_SHA512 286#options VERIFIED_EXEC_FP_SHA1 287#options VERIFIED_EXEC_FP_MD5 288