xref: /netbsd-src/sys/arch/powerpc/ibm4xx/dev/if_emac.c (revision b7ae68fde0d8ef1c03714e8bbb1ee7c6118ea93b)
1 /*	$NetBSD: if_emac.c,v 1.26 2006/05/05 18:04:42 thorpej Exp $	*/
2 
3 /*
4  * Copyright 2001, 2002 Wasabi Systems, Inc.
5  * All rights reserved.
6  *
7  * Written by Simon Burge and Jason Thorpe for Wasabi Systems, Inc.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice, this list of conditions and the following disclaimer.
14  * 2. Redistributions in binary form must reproduce the above copyright
15  *    notice, this list of conditions and the following disclaimer in the
16  *    documentation and/or other materials provided with the distribution.
17  * 3. All advertising materials mentioning features or use of this software
18  *    must display the following acknowledgement:
19  *      This product includes software developed for the NetBSD Project by
20  *      Wasabi Systems, Inc.
21  * 4. The name of Wasabi Systems, Inc. may not be used to endorse
22  *    or promote products derived from this software without specific prior
23  *    written permission.
24  *
25  * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
26  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
27  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
28  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL WASABI SYSTEMS, INC
29  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
30  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
31  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
32  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
33  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
34  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
35  * POSSIBILITY OF SUCH DAMAGE.
36  */
37 
38 #include <sys/cdefs.h>
39 __KERNEL_RCSID(0, "$NetBSD: if_emac.c,v 1.26 2006/05/05 18:04:42 thorpej Exp $");
40 
41 #include "bpfilter.h"
42 
43 #include <sys/param.h>
44 #include <sys/systm.h>
45 #include <sys/mbuf.h>
46 #include <sys/kernel.h>
47 #include <sys/socket.h>
48 #include <sys/ioctl.h>
49 
50 #include <uvm/uvm_extern.h>		/* for PAGE_SIZE */
51 
52 #include <net/if.h>
53 #include <net/if_dl.h>
54 #include <net/if_media.h>
55 #include <net/if_ether.h>
56 
57 #if NBPFILTER > 0
58 #include <net/bpf.h>
59 #endif
60 
61 #include <powerpc/ibm4xx/dev/opbvar.h>
62 
63 #include <powerpc/ibm4xx/ibm405gp.h>
64 #include <powerpc/ibm4xx/mal405gp.h>
65 #include <powerpc/ibm4xx/dcr405gp.h>
66 #include <powerpc/ibm4xx/dev/emacreg.h>
67 #include <powerpc/ibm4xx/dev/if_emacreg.h>
68 
69 #include <dev/mii/miivar.h>
70 
71 /*
72  * Transmit descriptor list size.  There are two Tx channels, each with
73  * up to 256 hardware descriptors available.  We currently use one Tx
74  * channel.  We tell the upper layers that they can queue a lot of
75  * packets, and we go ahead and manage up to 64 of them at a time.  We
76  * allow up to 16 DMA segments per packet.
77  */
78 #define	EMAC_NTXSEGS		16
79 #define	EMAC_TXQUEUELEN		64
80 #define	EMAC_TXQUEUELEN_MASK	(EMAC_TXQUEUELEN - 1)
81 #define	EMAC_TXQUEUE_GC		(EMAC_TXQUEUELEN / 4)
82 #define	EMAC_NTXDESC		256
83 #define	EMAC_NTXDESC_MASK	(EMAC_NTXDESC - 1)
84 #define	EMAC_NEXTTX(x)		(((x) + 1) & EMAC_NTXDESC_MASK)
85 #define	EMAC_NEXTTXS(x)		(((x) + 1) & EMAC_TXQUEUELEN_MASK)
86 
87 /*
88  * Receive descriptor list size.  There is one Rx channel with up to 256
89  * hardware descriptors available.  We allocate 64 receive descriptors,
90  * each with a 2k buffer (MCLBYTES).
91  */
92 #define	EMAC_NRXDESC		64
93 #define	EMAC_NRXDESC_MASK	(EMAC_NRXDESC - 1)
94 #define	EMAC_NEXTRX(x)		(((x) + 1) & EMAC_NRXDESC_MASK)
95 #define	EMAC_PREVRX(x)		(((x) - 1) & EMAC_NRXDESC_MASK)
96 
97 /*
98  * Transmit/receive descriptors that are DMA'd to the EMAC.
99  */
100 struct emac_control_data {
101 	struct mal_descriptor ecd_txdesc[EMAC_NTXDESC];
102 	struct mal_descriptor ecd_rxdesc[EMAC_NRXDESC];
103 };
104 
105 #define	EMAC_CDOFF(x)		offsetof(struct emac_control_data, x)
106 #define	EMAC_CDTXOFF(x)		EMAC_CDOFF(ecd_txdesc[(x)])
107 #define	EMAC_CDRXOFF(x)		EMAC_CDOFF(ecd_rxdesc[(x)])
108 
109 /*
110  * Software state for transmit jobs.
111  */
112 struct emac_txsoft {
113 	struct mbuf *txs_mbuf;		/* head of mbuf chain */
114 	bus_dmamap_t txs_dmamap;	/* our DMA map */
115 	int txs_firstdesc;		/* first descriptor in packet */
116 	int txs_lastdesc;		/* last descriptor in packet */
117 	int txs_ndesc;			/* # of descriptors used */
118 };
119 
120 /*
121  * Software state for receive descriptors.
122  */
123 struct emac_rxsoft {
124 	struct mbuf *rxs_mbuf;		/* head of mbuf chain */
125 	bus_dmamap_t rxs_dmamap;	/* our DMA map */
126 };
127 
128 /*
129  * Software state per device.
130  */
131 struct emac_softc {
132 	struct device sc_dev;		/* generic device information */
133 	bus_space_tag_t sc_st;		/* bus space tag */
134 	bus_space_handle_t sc_sh;	/* bus space handle */
135 	bus_dma_tag_t sc_dmat;		/* bus DMA tag */
136 	struct ethercom sc_ethercom;	/* ethernet common data */
137 	void *sc_sdhook;		/* shutdown hook */
138 	void *sc_powerhook;		/* power management hook */
139 
140 	struct mii_data sc_mii;		/* MII/media information */
141 	struct callout sc_callout;	/* tick callout */
142 
143 	u_int32_t sc_mr1;		/* copy of Mode Register 1 */
144 
145 	bus_dmamap_t sc_cddmamap;	/* control data dma map */
146 #define	sc_cddma	sc_cddmamap->dm_segs[0].ds_addr
147 
148 	/* Software state for transmit/receive descriptors. */
149 	struct emac_txsoft sc_txsoft[EMAC_TXQUEUELEN];
150 	struct emac_rxsoft sc_rxsoft[EMAC_NRXDESC];
151 
152 	/* Control data structures. */
153 	struct emac_control_data *sc_control_data;
154 #define	sc_txdescs	sc_control_data->ecd_txdesc
155 #define	sc_rxdescs	sc_control_data->ecd_rxdesc
156 
157 #ifdef EMAC_EVENT_COUNTERS
158 	struct evcnt sc_ev_rxintr;	/* Rx interrupts */
159 	struct evcnt sc_ev_txintr;	/* Tx interrupts */
160 	struct evcnt sc_ev_rxde;	/* Rx descriptor interrupts */
161 	struct evcnt sc_ev_txde;	/* Tx descriptor interrupts */
162 	struct evcnt sc_ev_wol;		/* Wake-On-Lan interrupts */
163 	struct evcnt sc_ev_serr;	/* MAL system error interrupts */
164 	struct evcnt sc_ev_intr;	/* General EMAC interrupts */
165 
166 	struct evcnt sc_ev_txreap;	/* Calls to Tx descriptor reaper */
167 	struct evcnt sc_ev_txsstall;	/* Tx stalled due to no txs */
168 	struct evcnt sc_ev_txdstall;	/* Tx stalled due to no txd */
169 	struct evcnt sc_ev_txdrop;	/* Tx packets dropped (too many segs) */
170 	struct evcnt sc_ev_tu;		/* Tx underrun */
171 #endif /* EMAC_EVENT_COUNTERS */
172 
173 	int sc_txfree;			/* number of free Tx descriptors */
174 	int sc_txnext;			/* next ready Tx descriptor */
175 
176 	int sc_txsfree;			/* number of free Tx jobs */
177 	int sc_txsnext;			/* next ready Tx job */
178 	int sc_txsdirty;		/* dirty Tx jobs */
179 
180 	int sc_rxptr;			/* next ready RX descriptor/descsoft */
181 };
182 
183 #ifdef EMAC_EVENT_COUNTERS
184 #define	EMAC_EVCNT_INCR(ev)	(ev)->ev_count++
185 #else
186 #define	EMAC_EVCNT_INCR(ev)	/* nothing */
187 #endif
188 
189 #define	EMAC_CDTXADDR(sc, x)	((sc)->sc_cddma + EMAC_CDTXOFF((x)))
190 #define	EMAC_CDRXADDR(sc, x)	((sc)->sc_cddma + EMAC_CDRXOFF((x)))
191 
192 #define	EMAC_CDTXSYNC(sc, x, n, ops)					\
193 do {									\
194 	int __x, __n;							\
195 									\
196 	__x = (x);							\
197 	__n = (n);							\
198 									\
199 	/* If it will wrap around, sync to the end of the ring. */	\
200 	if ((__x + __n) > EMAC_NTXDESC) {				\
201 		bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap,	\
202 		    EMAC_CDTXOFF(__x), sizeof(struct mal_descriptor) *	\
203 		    (EMAC_NTXDESC - __x), (ops));			\
204 		__n -= (EMAC_NTXDESC - __x);				\
205 		__x = 0;						\
206 	}								\
207 									\
208 	/* Now sync whatever is left. */				\
209 	bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap,		\
210 	    EMAC_CDTXOFF(__x), sizeof(struct mal_descriptor) * __n, (ops)); \
211 } while (/*CONSTCOND*/0)
212 
213 #define	EMAC_CDRXSYNC(sc, x, ops)					\
214 do {									\
215 	bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap,		\
216 	    EMAC_CDRXOFF((x)), sizeof(struct mal_descriptor), (ops));	\
217 } while (/*CONSTCOND*/0)
218 
219 #define	EMAC_INIT_RXDESC(sc, x)						\
220 do {									\
221 	struct emac_rxsoft *__rxs = &(sc)->sc_rxsoft[(x)];		\
222 	struct mal_descriptor *__rxd = &(sc)->sc_rxdescs[(x)];		\
223 	struct mbuf *__m = __rxs->rxs_mbuf;				\
224 									\
225 	/*								\
226 	 * Note: We scoot the packet forward 2 bytes in the buffer	\
227 	 * so that the payload after the Ethernet header is aligned	\
228 	 * to a 4-byte boundary.					\
229 	 */								\
230 	__m->m_data = __m->m_ext.ext_buf + 2;				\
231 									\
232 	__rxd->md_data = __rxs->rxs_dmamap->dm_segs[0].ds_addr + 2;	\
233 	__rxd->md_data_len = __m->m_ext.ext_size - 2;			\
234 	__rxd->md_stat_ctrl = MAL_RX_EMPTY | MAL_RX_INTERRUPT |		\
235 	    /* Set wrap on last descriptor. */				\
236 	    (((x) == EMAC_NRXDESC - 1) ? MAL_RX_WRAP : 0);		\
237 	EMAC_CDRXSYNC((sc), (x), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); \
238 } while (/*CONSTCOND*/0)
239 
240 #define	EMAC_WRITE(sc, reg, val) \
241 	bus_space_write_stream_4((sc)->sc_st, (sc)->sc_sh, (reg), (val))
242 #define	EMAC_READ(sc, reg) \
243 	bus_space_read_stream_4((sc)->sc_st, (sc)->sc_sh, (reg))
244 
245 #define	EMAC_SET_FILTER(aht, category) \
246 do {									\
247 	(aht)[3 - ((category) >> 4)] |= 1 << ((category) & 0xf);	\
248 } while (/*CONSTCOND*/0)
249 
250 static int	emac_match(struct device *, struct cfdata *, void *);
251 static void	emac_attach(struct device *, struct device *, void *);
252 
253 static int	emac_add_rxbuf(struct emac_softc *, int);
254 static int	emac_init(struct ifnet *);
255 static int	emac_ioctl(struct ifnet *, u_long, caddr_t);
256 static void	emac_reset(struct emac_softc *);
257 static void	emac_rxdrain(struct emac_softc *);
258 static int	emac_txreap(struct emac_softc *);
259 static void	emac_shutdown(void *);
260 static void	emac_start(struct ifnet *);
261 static void	emac_stop(struct ifnet *, int);
262 static void	emac_watchdog(struct ifnet *);
263 static int	emac_set_filter(struct emac_softc *);
264 
265 static int	emac_wol_intr(void *);
266 static int	emac_serr_intr(void *);
267 static int	emac_txeob_intr(void *);
268 static int	emac_rxeob_intr(void *);
269 static int	emac_txde_intr(void *);
270 static int	emac_rxde_intr(void *);
271 static int	emac_intr(void *);
272 
273 static int	emac_mediachange(struct ifnet *);
274 static void	emac_mediastatus(struct ifnet *, struct ifmediareq *);
275 static int	emac_mii_readreg(struct device *, int, int);
276 static void	emac_mii_statchg(struct device *);
277 static void	emac_mii_tick(void *);
278 static uint32_t	emac_mii_wait(struct emac_softc *);
279 static void	emac_mii_writereg(struct device *, int, int, int);
280 
281 int		emac_copy_small = 0;
282 
283 CFATTACH_DECL(emac, sizeof(struct emac_softc),
284     emac_match, emac_attach, NULL, NULL);
285 
286 static int
287 emac_match(struct device *parent, struct cfdata *cf, void *aux)
288 {
289 	struct opb_attach_args *oaa = aux;
290 
291 	/* match only on-chip ethernet devices */
292 	if (strcmp(oaa->opb_name, cf->cf_name) == 0)
293 		return (1);
294 
295 	return (0);
296 }
297 
298 static void
299 emac_attach(struct device *parent, struct device *self, void *aux)
300 {
301 	struct opb_attach_args *oaa = aux;
302 	struct emac_softc *sc = (struct emac_softc *)self;
303 	struct ifnet *ifp = &sc->sc_ethercom.ec_if;
304 	struct mii_data *mii = &sc->sc_mii;
305 	bus_dma_segment_t seg;
306 	int error, i, nseg;
307 	const uint8_t *enaddr;
308 	prop_data_t ea;
309 
310 	sc->sc_st = oaa->opb_bt;
311 	sc->sc_sh = oaa->opb_addr;
312 	sc->sc_dmat = oaa->opb_dmat;
313 
314 	printf(": 405GP EMAC\n");
315 
316 	/*
317 	 * Set up Mode Register 1 - set receive and transmit FIFOs to maximum
318 	 * size, allow transmit of multiple packets (only channel 0 is used).
319 	 *
320 	 * XXX: Allow pause packets??
321 	 */
322 	sc->sc_mr1 = MR1_RFS_4KB | MR1_TFS_2KB | MR1_TR0_MULTIPLE;
323 
324 	intr_establish(oaa->opb_irq    , IST_LEVEL, IPL_NET, emac_wol_intr, sc);
325 	intr_establish(oaa->opb_irq + 1, IST_LEVEL, IPL_NET, emac_serr_intr, sc);
326 	intr_establish(oaa->opb_irq + 2, IST_LEVEL, IPL_NET, emac_txeob_intr, sc);
327 	intr_establish(oaa->opb_irq + 3, IST_LEVEL, IPL_NET, emac_rxeob_intr, sc);
328 	intr_establish(oaa->opb_irq + 4, IST_LEVEL, IPL_NET, emac_txde_intr, sc);
329 	intr_establish(oaa->opb_irq + 5, IST_LEVEL, IPL_NET, emac_rxde_intr, sc);
330 	intr_establish(oaa->opb_irq + 6, IST_LEVEL, IPL_NET, emac_intr, sc);
331 	printf("%s: interrupting at irqs %d .. %d\n", sc->sc_dev.dv_xname,
332 	    oaa->opb_irq, oaa->opb_irq + 6);
333 
334 	/*
335 	 * Allocate the control data structures, and create and load the
336 	 * DMA map for it.
337 	 */
338 	if ((error = bus_dmamem_alloc(sc->sc_dmat,
339 	    sizeof(struct emac_control_data), 0, 0, &seg, 1, &nseg, 0)) != 0) {
340 		printf("%s: unable to allocate control data, error = %d\n",
341 		    sc->sc_dev.dv_xname, error);
342 		goto fail_0;
343 	}
344 
345 	if ((error = bus_dmamem_map(sc->sc_dmat, &seg, nseg,
346 	    sizeof(struct emac_control_data), (caddr_t *)&sc->sc_control_data,
347 	    BUS_DMA_COHERENT)) != 0) {
348 		printf("%s: unable to map control data, error = %d\n",
349 		    sc->sc_dev.dv_xname, error);
350 		goto fail_1;
351 	}
352 
353 	if ((error = bus_dmamap_create(sc->sc_dmat,
354 	    sizeof(struct emac_control_data), 1,
355 	    sizeof(struct emac_control_data), 0, 0, &sc->sc_cddmamap)) != 0) {
356 		printf("%s: unable to create control data DMA map, "
357 		    "error = %d\n", sc->sc_dev.dv_xname, error);
358 		goto fail_2;
359 	}
360 
361 	if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap,
362 	    sc->sc_control_data, sizeof(struct emac_control_data), NULL,
363 	    0)) != 0) {
364 		printf("%s: unable to load control data DMA map, error = %d\n",
365 		    sc->sc_dev.dv_xname, error);
366 		goto fail_3;
367 	}
368 
369 	/*
370 	 * Create the transmit buffer DMA maps.
371 	 */
372 	for (i = 0; i < EMAC_TXQUEUELEN; i++) {
373 		if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES,
374 		    EMAC_NTXSEGS, MCLBYTES, 0, 0,
375 		    &sc->sc_txsoft[i].txs_dmamap)) != 0) {
376 			printf("%s: unable to create tx DMA map %d, "
377 			    "error = %d\n", sc->sc_dev.dv_xname, i, error);
378 			goto fail_4;
379 		}
380 	}
381 
382 	/*
383 	 * Create the receive buffer DMA maps.
384 	 */
385 	for (i = 0; i < EMAC_NRXDESC; i++) {
386 		if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1,
387 		    MCLBYTES, 0, 0, &sc->sc_rxsoft[i].rxs_dmamap)) != 0) {
388 			printf("%s: unable to create rx DMA map %d, "
389 			    "error = %d\n", sc->sc_dev.dv_xname, i, error);
390 			goto fail_5;
391 		}
392 		sc->sc_rxsoft[i].rxs_mbuf = NULL;
393 	}
394 
395 	/*
396 	 * Reset the chip to a known state.
397 	 */
398 	emac_reset(sc);
399 
400 	/* Fetch the Ethernet address. */
401 	ea = prop_dictionary_get(device_properties(&sc->sc_dev), "mac-addr");
402 	if (ea == NULL) {
403 		printf("%s: unable to get mac-addr property\n",
404 		    sc->sc_dev.dv_xname);
405 		return;
406 	}
407 	KASSERT(prop_object_type(ea) == PROP_TYPE_DATA);
408 	KASSERT(prop_data_size(ea) == ETHER_ADDR_LEN);
409 	enaddr = prop_data_data_nocopy(ea);
410 
411 	printf("%s: Ethernet address %s\n", sc->sc_dev.dv_xname,
412 	    ether_sprintf(enaddr));
413 
414 	/*
415 	 * Initialise the media structures.
416 	 */
417 	mii->mii_ifp = ifp;
418 	mii->mii_readreg = emac_mii_readreg;
419 	mii->mii_writereg = emac_mii_writereg;
420 	mii->mii_statchg = emac_mii_statchg;
421 
422 	ifmedia_init(&mii->mii_media, 0, emac_mediachange,
423 	    emac_mediastatus);
424 	mii_attach(&sc->sc_dev, mii, 0xffffffff,
425 	    MII_PHY_ANY, MII_OFFSET_ANY, 0);
426 	if (LIST_FIRST(&mii->mii_phys) == NULL) {
427 		ifmedia_add(&mii->mii_media, IFM_ETHER|IFM_NONE, 0, NULL);
428 		ifmedia_set(&mii->mii_media, IFM_ETHER|IFM_NONE);
429 	} else
430 		ifmedia_set(&mii->mii_media, IFM_ETHER|IFM_AUTO);
431 
432 	ifp = &sc->sc_ethercom.ec_if;
433 	strcpy(ifp->if_xname, sc->sc_dev.dv_xname);
434 	ifp->if_softc = sc;
435 	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
436 	ifp->if_ioctl = emac_ioctl;
437 	ifp->if_start = emac_start;
438 	ifp->if_watchdog = emac_watchdog;
439 	ifp->if_init = emac_init;
440 	ifp->if_stop = emac_stop;
441 	IFQ_SET_READY(&ifp->if_snd);
442 
443 	/*
444 	 * We can support 802.1Q VLAN-sized frames.
445 	 */
446 	sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU;
447 
448 	/*
449 	 * Attach the interface.
450 	 */
451 	if_attach(ifp);
452 	ether_ifattach(ifp, enaddr);
453 
454 #ifdef EMAC_EVENT_COUNTERS
455 	/*
456 	 * Attach the event counters.
457 	 */
458 	evcnt_attach_dynamic(&sc->sc_ev_rxintr, EVCNT_TYPE_INTR,
459 	    NULL, sc->sc_dev.dv_xname, "rxintr");
460 	evcnt_attach_dynamic(&sc->sc_ev_txintr, EVCNT_TYPE_INTR,
461 	    NULL, sc->sc_dev.dv_xname, "txintr");
462 	evcnt_attach_dynamic(&sc->sc_ev_rxde, EVCNT_TYPE_INTR,
463 	    NULL, sc->sc_dev.dv_xname, "rxde");
464 	evcnt_attach_dynamic(&sc->sc_ev_txde, EVCNT_TYPE_INTR,
465 	    NULL, sc->sc_dev.dv_xname, "txde");
466 	evcnt_attach_dynamic(&sc->sc_ev_wol, EVCNT_TYPE_INTR,
467 	    NULL, sc->sc_dev.dv_xname, "wol");
468 	evcnt_attach_dynamic(&sc->sc_ev_serr, EVCNT_TYPE_INTR,
469 	    NULL, sc->sc_dev.dv_xname, "serr");
470 	evcnt_attach_dynamic(&sc->sc_ev_intr, EVCNT_TYPE_INTR,
471 	    NULL, sc->sc_dev.dv_xname, "intr");
472 
473 	evcnt_attach_dynamic(&sc->sc_ev_txreap, EVCNT_TYPE_MISC,
474 	    NULL, sc->sc_dev.dv_xname, "txreap");
475 	evcnt_attach_dynamic(&sc->sc_ev_txsstall, EVCNT_TYPE_MISC,
476 	    NULL, sc->sc_dev.dv_xname, "txsstall");
477 	evcnt_attach_dynamic(&sc->sc_ev_txdstall, EVCNT_TYPE_MISC,
478 	    NULL, sc->sc_dev.dv_xname, "txdstall");
479 	evcnt_attach_dynamic(&sc->sc_ev_txdrop, EVCNT_TYPE_MISC,
480 	    NULL, sc->sc_dev.dv_xname, "txdrop");
481 	evcnt_attach_dynamic(&sc->sc_ev_tu, EVCNT_TYPE_MISC,
482 	    NULL, sc->sc_dev.dv_xname, "tu");
483 #endif /* EMAC_EVENT_COUNTERS */
484 
485 	/*
486 	 * Make sure the interface is shutdown during reboot.
487 	 */
488 	sc->sc_sdhook = shutdownhook_establish(emac_shutdown, sc);
489 	if (sc->sc_sdhook == NULL)
490 		printf("%s: WARNING: unable to establish shutdown hook\n",
491 		    sc->sc_dev.dv_xname);
492 
493 	return;
494 
495 	/*
496 	 * Free any resources we've allocated during the failed attach
497 	 * attempt.  Do this in reverse order and fall through.
498 	 */
499 fail_5:
500 	for (i = 0; i < EMAC_NRXDESC; i++) {
501 		if (sc->sc_rxsoft[i].rxs_dmamap != NULL)
502 			bus_dmamap_destroy(sc->sc_dmat,
503 			    sc->sc_rxsoft[i].rxs_dmamap);
504 	}
505 fail_4:
506 	for (i = 0; i < EMAC_TXQUEUELEN; i++) {
507 		if (sc->sc_txsoft[i].txs_dmamap != NULL)
508 			bus_dmamap_destroy(sc->sc_dmat,
509 			    sc->sc_txsoft[i].txs_dmamap);
510 	}
511 	bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap);
512 fail_3:
513 	bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap);
514 fail_2:
515 	bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_control_data,
516 	    sizeof(struct emac_control_data));
517 fail_1:
518 	bus_dmamem_free(sc->sc_dmat, &seg, nseg);
519 fail_0:
520 	return;
521 }
522 
523 /*
524  * Device shutdown routine.
525  */
526 static void
527 emac_shutdown(void *arg)
528 {
529 	struct emac_softc *sc = arg;
530 
531 	emac_stop(&sc->sc_ethercom.ec_if, 0);
532 }
533 
534 /* ifnet interface function */
535 static void
536 emac_start(struct ifnet *ifp)
537 {
538 	struct emac_softc *sc = ifp->if_softc;
539 	struct mbuf *m0;
540 	struct emac_txsoft *txs;
541 	bus_dmamap_t dmamap;
542 	int error, firsttx, nexttx, lasttx, ofree, seg;
543 
544 	lasttx = 0;	/* XXX gcc */
545 
546 	if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING)
547 		return;
548 
549 	/*
550 	 * Remember the previous number of free descriptors.
551 	 */
552 	ofree = sc->sc_txfree;
553 
554 	/*
555 	 * Loop through the send queue, setting up transmit descriptors
556 	 * until we drain the queue, or use up all available transmit
557 	 * descriptors.
558 	 */
559 	for (;;) {
560 		/* Grab a packet off the queue. */
561 		IFQ_POLL(&ifp->if_snd, m0);
562 		if (m0 == NULL)
563 			break;
564 
565 		/*
566 		 * Get a work queue entry.  Reclaim used Tx descriptors if
567 		 * we are running low.
568 		 */
569 		if (sc->sc_txsfree < EMAC_TXQUEUE_GC) {
570 			emac_txreap(sc);
571 			if (sc->sc_txsfree == 0) {
572 				EMAC_EVCNT_INCR(&sc->sc_ev_txsstall);
573 				break;
574 			}
575 		}
576 
577 		txs = &sc->sc_txsoft[sc->sc_txsnext];
578 		dmamap = txs->txs_dmamap;
579 
580 		/*
581 		 * Load the DMA map.  If this fails, the packet either
582 		 * didn't fit in the alloted number of segments, or we
583 		 * were short on resources.  In this case, we'll copy
584 		 * and try again.
585 		 */
586 		error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0,
587 		    BUS_DMA_WRITE|BUS_DMA_NOWAIT);
588 		if (error) {
589 			if (error == EFBIG) {
590 				EMAC_EVCNT_INCR(&sc->sc_ev_txdrop);
591 				printf("%s: Tx packet consumes too many "
592 				    "DMA segments, dropping...\n",
593 				    sc->sc_dev.dv_xname);
594 				    IFQ_DEQUEUE(&ifp->if_snd, m0);
595 				    m_freem(m0);
596 				    continue;
597 			}
598 			/* Short on resources, just stop for now. */
599 			break;
600 		}
601 
602 		/*
603 		 * Ensure we have enough descriptors free to describe
604 		 * the packet.
605 		 */
606 		if (dmamap->dm_nsegs > sc->sc_txfree) {
607 			/*
608 			 * Not enough free descriptors to transmit this
609 			 * packet.  We haven't committed anything yet,
610 			 * so just unload the DMA map, put the packet
611 			 * back on the queue, and punt.  Notify the upper
612 			 * layer that there are not more slots left.
613 			 *
614 			 */
615 			ifp->if_flags |= IFF_OACTIVE;
616 			bus_dmamap_unload(sc->sc_dmat, dmamap);
617 			EMAC_EVCNT_INCR(&sc->sc_ev_txdstall);
618 			break;
619 		}
620 
621 		IFQ_DEQUEUE(&ifp->if_snd, m0);
622 
623 		/*
624 		 * WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET.
625 		 */
626 
627 		/* Sync the DMA map. */
628 		bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize,
629 		    BUS_DMASYNC_PREWRITE);
630 
631 		/*
632 		 * Store a pointer to the packet so that we can free it
633 		 * later.
634 		 */
635 		txs->txs_mbuf = m0;
636 		txs->txs_firstdesc = sc->sc_txnext;
637 		txs->txs_ndesc = dmamap->dm_nsegs;
638 
639 		/*
640 		 * Initialize the transmit descriptor.
641 		 */
642 		firsttx = sc->sc_txnext;
643 		for (nexttx = sc->sc_txnext, seg = 0;
644 		     seg < dmamap->dm_nsegs;
645 		     seg++, nexttx = EMAC_NEXTTX(nexttx)) {
646 			/*
647 			 * If this is the first descriptor we're
648 			 * enqueueing, don't set the TX_READY bit just
649 			 * yet.  That could cause a race condition.
650 			 * We'll do it below.
651 			 */
652 			sc->sc_txdescs[nexttx].md_data =
653 			    dmamap->dm_segs[seg].ds_addr;
654 			sc->sc_txdescs[nexttx].md_data_len =
655 			    dmamap->dm_segs[seg].ds_len;
656 			sc->sc_txdescs[nexttx].md_stat_ctrl =
657 			    (sc->sc_txdescs[nexttx].md_stat_ctrl & MAL_TX_WRAP) |
658 			    (nexttx == firsttx ? 0 : MAL_TX_READY) |
659 			    EMAC_TXC_GFCS | EMAC_TXC_GPAD;
660 			lasttx = nexttx;
661 		}
662 
663 		/* Set the LAST bit on the last segment. */
664 		sc->sc_txdescs[lasttx].md_stat_ctrl |= MAL_TX_LAST;
665 
666 		/*
667 		 * Set up last segment descriptor to send an interrupt after
668 		 * that descriptor is transmitted, and bypass existing Tx
669 		 * descriptor reaping method (for now...).
670 		 */
671 		sc->sc_txdescs[lasttx].md_stat_ctrl |= MAL_TX_INTERRUPT;
672 
673 
674 		txs->txs_lastdesc = lasttx;
675 
676 		/* Sync the descriptors we're using. */
677 		EMAC_CDTXSYNC(sc, sc->sc_txnext, dmamap->dm_nsegs,
678 		    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
679 
680 		/*
681 		 * The entire packet chain is set up.  Give the
682 		 * first descriptor to the chip now.
683 		 */
684 		sc->sc_txdescs[firsttx].md_stat_ctrl |= MAL_TX_READY;
685 		EMAC_CDTXSYNC(sc, firsttx, 1,
686 		    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
687 		/*
688 		 * Tell the EMAC that a new packet is available.
689 		 */
690 		EMAC_WRITE(sc, EMAC_TMR0, TMR0_GNP0);
691 
692 		/* Advance the tx pointer. */
693 		sc->sc_txfree -= txs->txs_ndesc;
694 		sc->sc_txnext = nexttx;
695 
696 		sc->sc_txsfree--;
697 		sc->sc_txsnext = EMAC_NEXTTXS(sc->sc_txsnext);
698 
699 #if NBPFILTER > 0
700 		/*
701 		 * Pass the packet to any BPF listeners.
702 		 */
703 		if (ifp->if_bpf)
704 			bpf_mtap(ifp->if_bpf, m0);
705 #endif /* NBPFILTER > 0 */
706 	}
707 
708 	if (sc->sc_txfree == 0) {
709 		/* No more slots left; notify upper layer. */
710 		ifp->if_flags |= IFF_OACTIVE;
711 	}
712 
713 	if (sc->sc_txfree != ofree) {
714 		/* Set a watchdog timer in case the chip flakes out. */
715 		ifp->if_timer = 5;
716 	}
717 }
718 
719 static int
720 emac_init(struct ifnet *ifp)
721 {
722 	struct emac_softc *sc = ifp->if_softc;
723 	struct emac_rxsoft *rxs;
724 	uint8_t *enaddr = LLADDR(ifp->if_sadl);
725 	int error, i;
726 
727 	error = 0;
728 
729 	/* Cancel any pending I/O. */
730 	emac_stop(ifp, 0);
731 
732 	/* Reset the chip to a known state. */
733 	emac_reset(sc);
734 
735 	/*
736 	 * Initialise the transmit descriptor ring.
737 	 */
738 	memset(sc->sc_txdescs, 0, sizeof(sc->sc_txdescs));
739 	/* set wrap on last descriptor */
740 	sc->sc_txdescs[EMAC_NTXDESC - 1].md_stat_ctrl |= MAL_TX_WRAP;
741 	EMAC_CDTXSYNC(sc, 0, EMAC_NTXDESC,
742 		    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
743 	sc->sc_txfree = EMAC_NTXDESC;
744 	sc->sc_txnext = 0;
745 
746 	/*
747 	 * Initialise the transmit job descriptors.
748 	 */
749 	for (i = 0; i < EMAC_TXQUEUELEN; i++)
750 		sc->sc_txsoft[i].txs_mbuf = NULL;
751 	sc->sc_txsfree = EMAC_TXQUEUELEN;
752 	sc->sc_txsnext = 0;
753 	sc->sc_txsdirty = 0;
754 
755 	/*
756 	 * Initialise the receiver descriptor and receive job
757 	 * descriptor rings.
758 	 */
759 	for (i = 0; i < EMAC_NRXDESC; i++) {
760 		rxs = &sc->sc_rxsoft[i];
761 		if (rxs->rxs_mbuf == NULL) {
762 			if ((error = emac_add_rxbuf(sc, i)) != 0) {
763 				printf("%s: unable to allocate or map rx "
764 				    "buffer %d, error = %d\n",
765 				    sc->sc_dev.dv_xname, i, error);
766 				/*
767 				 * XXX Should attempt to run with fewer receive
768 				 * XXX buffers instead of just failing.
769 				 */
770 				emac_rxdrain(sc);
771 				goto out;
772 			}
773 		} else
774 			EMAC_INIT_RXDESC(sc, i);
775 	}
776 	sc->sc_rxptr = 0;
777 
778 	/*
779 	 * Set the current media.
780 	 */
781 	mii_mediachg(&sc->sc_mii);
782 
783 	/*
784 	 * Give the transmit and receive rings to the MAL.
785 	 */
786 	mtdcr(DCR_MAL0_TXCTP0R, EMAC_CDTXADDR(sc, 0));
787 	mtdcr(DCR_MAL0_RXCTP0R, EMAC_CDRXADDR(sc, 0));
788 
789 	/*
790 	 * Load the MAC address.
791 	 */
792 	EMAC_WRITE(sc, EMAC_IAHR, enaddr[0] << 8 | enaddr[1]);
793 	EMAC_WRITE(sc, EMAC_IALR,
794 	    enaddr[2] << 24 | enaddr[3] << 16 | enaddr[4] << 8 | enaddr[5]);
795 
796 	/*
797 	 * Set the receive channel buffer size (in units of 16 bytes).
798 	 */
799 #if MCLBYTES > (4096 - 16)	/* XXX! */
800 # error	MCLBYTES > max rx channel buffer size
801 #endif
802 	mtdcr(DCR_MAL0_RCBS0, MCLBYTES / 16);
803 
804 	/* Set fifos, media modes. */
805 	EMAC_WRITE(sc, EMAC_MR1, sc->sc_mr1);
806 
807 	/*
808 	 * Enable Individual and (possibly) Broadcast Address modes,
809 	 * runt packets, and strip padding.
810 	 */
811 	EMAC_WRITE(sc, EMAC_RMR, RMR_IAE | RMR_RRP | RMR_SP |
812 	    (ifp->if_flags & IFF_PROMISC ? RMR_PME : 0) |
813 	    (ifp->if_flags & IFF_BROADCAST ? RMR_BAE : 0));
814 
815 	/*
816 	 * Set low- and urgent-priority request thresholds.
817 	 */
818 	EMAC_WRITE(sc, EMAC_TMR1,
819 	    ((7 << TMR1_TLR_SHIFT) & TMR1_TLR_MASK) | /* 16 word burst */
820 	    ((15 << TMR1_TUR_SHIFT) & TMR1_TUR_MASK));
821 	/*
822 	 * Set Transmit Request Threshold Register.
823 	 */
824 	EMAC_WRITE(sc, EMAC_TRTR, TRTR_256);
825 
826 	/*
827 	 * Set high and low receive watermarks.
828 	 */
829 	EMAC_WRITE(sc, EMAC_RWMR,
830 	    30 << RWMR_RLWM_SHIFT | 64 << RWMR_RLWM_SHIFT);
831 
832 	/*
833 	 * Set frame gap.
834 	 */
835 	EMAC_WRITE(sc, EMAC_IPGVR, 8);
836 
837 	/*
838 	 * Set interrupt status enable bits for EMAC and MAL.
839 	 */
840 	EMAC_WRITE(sc, EMAC_ISER,
841 	    ISR_BP | ISR_SE | ISR_ALE | ISR_BFCS | ISR_PTLE | ISR_ORE | ISR_IRE);
842 	mtdcr(DCR_MAL0_IER, MAL0_IER_DE | MAL0_IER_NWE | MAL0_IER_TO |
843 	    MAL0_IER_OPB | MAL0_IER_PLB);
844 
845 	/*
846 	 * Enable the transmit and receive channel on the MAL.
847 	 */
848 	mtdcr(DCR_MAL0_RXCASR, MAL0_RXCASR_CHAN0);
849 	mtdcr(DCR_MAL0_TXCASR, MAL0_TXCASR_CHAN0);
850 
851 	/*
852 	 * Enable the transmit and receive channel on the EMAC.
853 	 */
854 	EMAC_WRITE(sc, EMAC_MR0, MR0_TXE | MR0_RXE);
855 
856 	/*
857 	 * Start the one second MII clock.
858 	 */
859 	callout_reset(&sc->sc_callout, hz, emac_mii_tick, sc);
860 
861 	/*
862 	 * ... all done!
863 	 */
864 	ifp->if_flags |= IFF_RUNNING;
865 	ifp->if_flags &= ~IFF_OACTIVE;
866 
867  out:
868 	if (error) {
869 		ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
870 		ifp->if_timer = 0;
871 		printf("%s: interface not running\n", sc->sc_dev.dv_xname);
872 	}
873 	return (error);
874 }
875 
876 static int
877 emac_add_rxbuf(struct emac_softc *sc, int idx)
878 {
879 	struct emac_rxsoft *rxs = &sc->sc_rxsoft[idx];
880 	struct mbuf *m;
881 	int error;
882 
883 	MGETHDR(m, M_DONTWAIT, MT_DATA);
884 	if (m == NULL)
885 		return (ENOBUFS);
886 
887 	MCLGET(m, M_DONTWAIT);
888 	if ((m->m_flags & M_EXT) == 0) {
889 		m_freem(m);
890 		return (ENOBUFS);
891 	}
892 
893 	if (rxs->rxs_mbuf != NULL)
894 		bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap);
895 
896 	rxs->rxs_mbuf = m;
897 
898 	error = bus_dmamap_load(sc->sc_dmat, rxs->rxs_dmamap,
899 	    m->m_ext.ext_buf, m->m_ext.ext_size, NULL, BUS_DMA_NOWAIT);
900 	if (error) {
901 		printf("%s: can't load rx DMA map %d, error = %d\n",
902 		    sc->sc_dev.dv_xname, idx, error);
903 		panic("emac_add_rxbuf");		/* XXX */
904 	}
905 
906 	bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0,
907 	    rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD);
908 
909 	EMAC_INIT_RXDESC(sc, idx);
910 
911 	return (0);
912 }
913 
914 /* ifnet interface function */
915 static void
916 emac_watchdog(struct ifnet *ifp)
917 {
918 	struct emac_softc *sc = ifp->if_softc;
919 
920 	/*
921 	 * Since we're not interrupting every packet, sweep
922 	 * up before we report an error.
923 	 */
924 	emac_txreap(sc);
925 
926 	if (sc->sc_txfree != EMAC_NTXDESC) {
927 		printf("%s: device timeout (txfree %d txsfree %d txnext %d)\n",
928 		    sc->sc_dev.dv_xname, sc->sc_txfree, sc->sc_txsfree,
929 		    sc->sc_txnext);
930 		ifp->if_oerrors++;
931 
932 		/* Reset the interface. */
933 		(void)emac_init(ifp);
934 	} else if (ifp->if_flags & IFF_DEBUG)
935 		printf("%s: recovered from device timeout\n",
936 		    sc->sc_dev.dv_xname);
937 
938 	/* try to get more packets going */
939 	emac_start(ifp);
940 }
941 
942 static void
943 emac_rxdrain(struct emac_softc *sc)
944 {
945 	struct emac_rxsoft *rxs;
946 	int i;
947 
948 	for (i = 0; i < EMAC_NRXDESC; i++) {
949 		rxs = &sc->sc_rxsoft[i];
950 		if (rxs->rxs_mbuf != NULL) {
951 			bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap);
952 			m_freem(rxs->rxs_mbuf);
953 			rxs->rxs_mbuf = NULL;
954 		}
955 	}
956 }
957 
958 /* ifnet interface function */
959 static void
960 emac_stop(struct ifnet *ifp, int disable)
961 {
962 	struct emac_softc *sc = ifp->if_softc;
963 	struct emac_txsoft *txs;
964 	int i;
965 
966 	/* Stop the one second clock. */
967 	callout_stop(&sc->sc_callout);
968 
969 	/* Down the MII */
970 	mii_down(&sc->sc_mii);
971 
972 	/* Disable interrupts. */
973 #if 0	/* Can't disable MAL interrupts without a reset... */
974 	EMAC_WRITE(sc, EMAC_ISER, 0);
975 #endif
976 	mtdcr(DCR_MAL0_IER, 0);
977 
978 	/* Disable the receive and transmit channels. */
979 	mtdcr(DCR_MAL0_RXCARR, MAL0_RXCARR_CHAN0);
980 	mtdcr(DCR_MAL0_TXCARR, MAL0_TXCARR_CHAN0 | MAL0_TXCARR_CHAN1);
981 
982 	/* Disable the transmit enable and receive MACs. */
983 	EMAC_WRITE(sc, EMAC_MR0,
984 	    EMAC_READ(sc, EMAC_MR0) & ~(MR0_TXE | MR0_RXE));
985 
986 	/* Release any queued transmit buffers. */
987 	for (i = 0; i < EMAC_TXQUEUELEN; i++) {
988 		txs = &sc->sc_txsoft[i];
989 		if (txs->txs_mbuf != NULL) {
990 			bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap);
991 			m_freem(txs->txs_mbuf);
992 			txs->txs_mbuf = NULL;
993 		}
994 	}
995 
996 	if (disable)
997 		emac_rxdrain(sc);
998 
999 	/*
1000 	 * Mark the interface down and cancel the watchdog timer.
1001 	 */
1002 	ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
1003 	ifp->if_timer = 0;
1004 }
1005 
1006 /* ifnet interface function */
1007 static int
1008 emac_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
1009 {
1010 	struct emac_softc *sc = ifp->if_softc;
1011 	struct ifreq *ifr = (struct ifreq *)data;
1012 	int s, error;
1013 
1014 	s = splnet();
1015 
1016 	switch (cmd) {
1017 	case SIOCSIFMEDIA:
1018 	case SIOCGIFMEDIA:
1019 		error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd);
1020 		break;
1021 
1022 	default:
1023 		error = ether_ioctl(ifp, cmd, data);
1024 		if (error == ENETRESET) {
1025 			/*
1026 			 * Multicast list has changed; set the hardware filter
1027 			 * accordingly.
1028 			 */
1029 			if (ifp->if_flags & IFF_RUNNING)
1030 				error = emac_set_filter(sc);
1031 			else
1032 				error = 0;
1033 		}
1034 		break;
1035 	}
1036 
1037 	/* try to get more packets going */
1038 	emac_start(ifp);
1039 
1040 	splx(s);
1041 	return (error);
1042 }
1043 
1044 static void
1045 emac_reset(struct emac_softc *sc)
1046 {
1047 
1048 	/* reset the MAL */
1049 	mtdcr(DCR_MAL0_CFG, MAL0_CFG_SR);
1050 
1051 	EMAC_WRITE(sc, EMAC_MR0, MR0_SRST);
1052 	delay(5);
1053 
1054 	/* XXX: check if MR0_SRST is clear until a timeout instead? */
1055 	EMAC_WRITE(sc, EMAC_MR0, EMAC_READ(sc, EMAC_MR0) & ~MR0_SRST);
1056 
1057 	/* XXX clear interrupts in EMAC_ISR just to be sure?? */
1058 
1059 	/* set the MAL config register */
1060 	mtdcr(DCR_MAL0_CFG, MAL0_CFG_PLBB | MAL0_CFG_OPBBL | MAL0_CFG_LEA |
1061 	    MAL0_CFG_SD | MAL0_CFG_PLBLT);
1062 }
1063 
1064 static int
1065 emac_set_filter(struct emac_softc *sc)
1066 {
1067 	struct ether_multistep step;
1068 	struct ether_multi *enm;
1069 	struct ifnet *ifp = &sc->sc_ethercom.ec_if;
1070 	uint32_t rmr, crc, gaht[4] = {0, 0, 0, 0};
1071 	int category, cnt = 0;
1072 
1073 	rmr = EMAC_READ(sc, EMAC_RMR);
1074 	rmr &= ~(RMR_PMME | RMR_MAE);
1075 	ifp->if_flags &= ~IFF_ALLMULTI;
1076 
1077 	ETHER_FIRST_MULTI(step, &sc->sc_ethercom, enm);
1078 	while (enm != NULL) {
1079 		if (memcmp(enm->enm_addrlo,
1080 		    enm->enm_addrhi, ETHER_ADDR_LEN) != 0) {
1081 			/*
1082 			 * We must listen to a range of multicast addresses.
1083 			 * For now, just accept all multicasts, rather than
1084 			 * trying to set only those filter bits needed to match
1085 			 * the range.  (At this time, the only use of address
1086 			 * ranges is for IP multicast routing, for which the
1087 			 * range is big enough to require all bits set.)
1088 			 */
1089 			gaht[0] = gaht[1] = gaht[2] = gaht[3] = 0xffff;
1090 			break;
1091 		}
1092 
1093 		crc = ether_crc32_be(enm->enm_addrlo, ETHER_ADDR_LEN);
1094 
1095 		/* Just want the 6 most significant bits. */
1096 		category = crc >> 26;
1097 		EMAC_SET_FILTER(gaht, category);
1098 
1099 		ETHER_NEXT_MULTI(step, enm);
1100 		cnt++;
1101 	}
1102 
1103 	if ((gaht[0] & gaht[1] & gaht[2] & gaht[3]) == 0xffff) {
1104 		/* All categories are true. */
1105 		ifp->if_flags |= IFF_ALLMULTI;
1106 		rmr |= RMR_PMME;
1107 	} else if (cnt != 0) {
1108 		/* Some categories are true. */
1109 		EMAC_WRITE(sc, EMAC_GAHT1, gaht[0]);
1110 		EMAC_WRITE(sc, EMAC_GAHT2, gaht[1]);
1111 		EMAC_WRITE(sc, EMAC_GAHT3, gaht[2]);
1112 		EMAC_WRITE(sc, EMAC_GAHT4, gaht[3]);
1113 
1114 		rmr |= RMR_MAE;
1115 	}
1116 	EMAC_WRITE(sc, EMAC_RMR, rmr);
1117 
1118 	return 0;
1119 }
1120 
1121 /*
1122  * EMAC General interrupt handler
1123  */
1124 static int
1125 emac_intr(void *arg)
1126 {
1127 	struct emac_softc *sc = arg;
1128 	uint32_t status;
1129 
1130 	EMAC_EVCNT_INCR(&sc->sc_ev_intr);
1131 	status = EMAC_READ(sc, EMAC_ISR);
1132 
1133 	/* Clear the interrupt status bits. */
1134 	EMAC_WRITE(sc, EMAC_ISR, status);
1135 
1136 	return (0);
1137 }
1138 
1139 /*
1140  * EMAC Wake-On-LAN interrupt handler
1141  */
1142 static int
1143 emac_wol_intr(void *arg)
1144 {
1145 	struct emac_softc *sc = arg;
1146 
1147 	EMAC_EVCNT_INCR(&sc->sc_ev_wol);
1148 	printf("%s: emac_wol_intr\n", sc->sc_dev.dv_xname);
1149 	return (0);
1150 }
1151 
1152 /*
1153  * MAL System ERRor interrupt handler
1154  */
1155 static int
1156 emac_serr_intr(void *arg)
1157 {
1158 #ifdef EMAC_EVENT_COUNTERS
1159 	struct emac_softc *sc = arg;
1160 #endif
1161 	u_int32_t esr;
1162 
1163 	EMAC_EVCNT_INCR(&sc->sc_ev_serr);
1164 	esr = mfdcr(DCR_MAL0_ESR);
1165 
1166 	/* Clear the interrupt status bits. */
1167 	mtdcr(DCR_MAL0_ESR, esr);
1168 	return (0);
1169 }
1170 
1171 /*
1172  * MAL Transmit End-Of-Buffer interrupt handler.
1173  * NOTE: This shouldn't be called!
1174  */
1175 static int
1176 emac_txeob_intr(void *arg)
1177 {
1178 	struct emac_softc *sc = arg;
1179 	struct ifnet *ifp = &sc->sc_ethercom.ec_if;
1180 	int handled;
1181 
1182 	EMAC_EVCNT_INCR(&sc->sc_ev_txintr);
1183 	handled = emac_txreap(arg);
1184 
1185 	/* try to get more packets going */
1186 	emac_start(ifp);
1187 
1188 	return (handled);
1189 
1190 }
1191 
1192 /*
1193  * Reap completed Tx descriptors.
1194  */
1195 static int
1196 emac_txreap(struct emac_softc *sc)
1197 {
1198 	struct ifnet *ifp = &sc->sc_ethercom.ec_if;
1199 	struct emac_txsoft *txs;
1200 	int handled, i;
1201 	u_int32_t txstat;
1202 
1203 	EMAC_EVCNT_INCR(&sc->sc_ev_txreap);
1204 	handled = 0;
1205 
1206 	/* Clear the interrupt */
1207 	mtdcr(DCR_MAL0_TXEOBISR, mfdcr(DCR_MAL0_TXEOBISR));
1208 
1209 	ifp->if_flags &= ~IFF_OACTIVE;
1210 
1211 	/*
1212 	 * Go through our Tx list and free mbufs for those
1213 	 * frames that have been transmitted.
1214 	 */
1215 	for (i = sc->sc_txsdirty; sc->sc_txsfree != EMAC_TXQUEUELEN;
1216 	    i = EMAC_NEXTTXS(i), sc->sc_txsfree++) {
1217 		txs = &sc->sc_txsoft[i];
1218 
1219 		EMAC_CDTXSYNC(sc, txs->txs_lastdesc,
1220 		    txs->txs_dmamap->dm_nsegs,
1221 		    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
1222 
1223 		txstat = sc->sc_txdescs[txs->txs_lastdesc].md_stat_ctrl;
1224 		if (txstat & MAL_TX_READY)
1225 			break;
1226 
1227 		handled = 1;
1228 
1229 		/*
1230 		 * Check for errors and collisions.
1231 		 */
1232 		if (txstat & (EMAC_TXS_UR | EMAC_TXS_ED))
1233 			ifp->if_oerrors++;
1234 
1235 #ifdef EMAC_EVENT_COUNTERS
1236 		if (txstat & EMAC_TXS_UR)
1237 			EMAC_EVCNT_INCR(&sc->sc_ev_tu);
1238 #endif /* EMAC_EVENT_COUNTERS */
1239 
1240 		if (txstat & (EMAC_TXS_EC | EMAC_TXS_MC | EMAC_TXS_SC | EMAC_TXS_LC)) {
1241 			if (txstat & EMAC_TXS_EC)
1242 				ifp->if_collisions += 16;
1243 			else if (txstat & EMAC_TXS_MC)
1244 				ifp->if_collisions += 2;	/* XXX? */
1245 			else if (txstat & EMAC_TXS_SC)
1246 				ifp->if_collisions++;
1247 			if (txstat & EMAC_TXS_LC)
1248 				ifp->if_collisions++;
1249 		} else
1250 			ifp->if_opackets++;
1251 
1252 		if (ifp->if_flags & IFF_DEBUG) {
1253 			if (txstat & EMAC_TXS_ED)
1254 				printf("%s: excessive deferral\n",
1255 				    sc->sc_dev.dv_xname);
1256 			if (txstat & EMAC_TXS_EC)
1257 				printf("%s: excessive collisions\n",
1258 				    sc->sc_dev.dv_xname);
1259 		}
1260 
1261 		sc->sc_txfree += txs->txs_ndesc;
1262 		bus_dmamap_sync(sc->sc_dmat, txs->txs_dmamap,
1263 		    0, txs->txs_dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE);
1264 		bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap);
1265 		m_freem(txs->txs_mbuf);
1266 		txs->txs_mbuf = NULL;
1267 	}
1268 
1269 	/* Update the dirty transmit buffer pointer. */
1270 	sc->sc_txsdirty = i;
1271 
1272 	/*
1273 	 * If there are no more pending transmissions, cancel the watchdog
1274 	 * timer.
1275 	 */
1276 	if (sc->sc_txsfree == EMAC_TXQUEUELEN)
1277 		ifp->if_timer = 0;
1278 
1279 	return (handled);
1280 }
1281 
1282 /*
1283  * MAL Receive End-Of-Buffer interrupt handler
1284  */
1285 static int
1286 emac_rxeob_intr(void *arg)
1287 {
1288 	struct emac_softc *sc = arg;
1289 	struct ifnet *ifp = &sc->sc_ethercom.ec_if;
1290 	struct emac_rxsoft *rxs;
1291 	struct mbuf *m;
1292 	u_int32_t rxstat;
1293 	int i, len;
1294 
1295 	EMAC_EVCNT_INCR(&sc->sc_ev_rxintr);
1296 
1297 	/* Clear the interrupt */
1298 	mtdcr(DCR_MAL0_RXEOBISR, mfdcr(DCR_MAL0_RXEOBISR));
1299 
1300 	for (i = sc->sc_rxptr;; i = EMAC_NEXTRX(i)) {
1301 		rxs = &sc->sc_rxsoft[i];
1302 
1303 		EMAC_CDRXSYNC(sc, i,
1304 		    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
1305 
1306 		rxstat = sc->sc_rxdescs[i].md_stat_ctrl;
1307 
1308 		if (rxstat & MAL_RX_EMPTY)
1309 			/*
1310 			 * We have processed all of the receive buffers.
1311 			 */
1312 			break;
1313 
1314 		/*
1315 		 * If an error occurred, update stats, clear the status
1316 		 * word, and leave the packet buffer in place.  It will
1317 		 * simply be reused the next time the ring comes around.
1318 		 */
1319 		if (rxstat & (EMAC_RXS_OE | EMAC_RXS_BP | EMAC_RXS_SE |
1320 		    EMAC_RXS_AE | EMAC_RXS_BFCS | EMAC_RXS_PTL | EMAC_RXS_ORE |
1321 		    EMAC_RXS_IRE)) {
1322 #define	PRINTERR(bit, str)						\
1323 			if (rxstat & (bit))				\
1324 				printf("%s: receive error: %s\n",	\
1325 				    sc->sc_dev.dv_xname, str)
1326 			ifp->if_ierrors++;
1327 			PRINTERR(EMAC_RXS_OE, "overrun error");
1328 			PRINTERR(EMAC_RXS_BP, "bad packet");
1329 			PRINTERR(EMAC_RXS_RP, "runt packet");
1330 			PRINTERR(EMAC_RXS_SE, "short event");
1331 			PRINTERR(EMAC_RXS_AE, "alignment error");
1332 			PRINTERR(EMAC_RXS_BFCS, "bad FCS");
1333 			PRINTERR(EMAC_RXS_PTL, "packet too long");
1334 			PRINTERR(EMAC_RXS_ORE, "out of range error");
1335 			PRINTERR(EMAC_RXS_IRE, "in range error");
1336 #undef PRINTERR
1337 			EMAC_INIT_RXDESC(sc, i);
1338 			continue;
1339 		}
1340 
1341 		bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0,
1342 		    rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD);
1343 
1344 		/*
1345 		 * No errors; receive the packet.  Note, the 405GP emac
1346 		 * includes the CRC with every packet.
1347 		 */
1348 		len = sc->sc_rxdescs[i].md_data_len - ETHER_CRC_LEN;
1349 
1350 		/*
1351 		 * If the packet is small enough to fit in a
1352 		 * single header mbuf, allocate one and copy
1353 		 * the data into it.  This greatly reduces
1354 		 * memory consumption when we receive lots
1355 		 * of small packets.
1356 		 *
1357 		 * Otherwise, we add a new buffer to the receive
1358 		 * chain.  If this fails, we drop the packet and
1359 		 * recycle the old buffer.
1360 		 */
1361 		if (emac_copy_small != 0 && len <= MHLEN) {
1362 			MGETHDR(m, M_DONTWAIT, MT_DATA);
1363 			if (m == NULL)
1364 				goto dropit;
1365 			memcpy(mtod(m, caddr_t),
1366 			    mtod(rxs->rxs_mbuf, caddr_t), len);
1367 			EMAC_INIT_RXDESC(sc, i);
1368 			bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0,
1369 			    rxs->rxs_dmamap->dm_mapsize,
1370 			    BUS_DMASYNC_PREREAD);
1371 		} else {
1372 			m = rxs->rxs_mbuf;
1373 			if (emac_add_rxbuf(sc, i) != 0) {
1374  dropit:
1375 				ifp->if_ierrors++;
1376 				EMAC_INIT_RXDESC(sc, i);
1377 				bus_dmamap_sync(sc->sc_dmat,
1378 				    rxs->rxs_dmamap, 0,
1379 				    rxs->rxs_dmamap->dm_mapsize,
1380 				    BUS_DMASYNC_PREREAD);
1381 				continue;
1382 			}
1383 		}
1384 
1385 		ifp->if_ipackets++;
1386 		m->m_pkthdr.rcvif = ifp;
1387 		m->m_pkthdr.len = m->m_len = len;
1388 
1389 #if NBPFILTER > 0
1390 		/*
1391 		 * Pass this up to any BPF listeners, but only
1392 		 * pass if up the stack if it's for us.
1393 		 */
1394 		if (ifp->if_bpf)
1395 			bpf_mtap(ifp->if_bpf, m);
1396 #endif /* NBPFILTER > 0 */
1397 
1398 		/* Pass it on. */
1399 		(*ifp->if_input)(ifp, m);
1400 	}
1401 
1402 	/* Update the receive pointer. */
1403 	sc->sc_rxptr = i;
1404 
1405 	return (0);
1406 }
1407 
1408 /*
1409  * MAL Transmit Descriptor Error interrupt handler
1410  */
1411 static int
1412 emac_txde_intr(void *arg)
1413 {
1414 	struct emac_softc *sc = arg;
1415 
1416 	EMAC_EVCNT_INCR(&sc->sc_ev_txde);
1417 	printf("%s: emac_txde_intr\n", sc->sc_dev.dv_xname);
1418 	return (0);
1419 }
1420 
1421 /*
1422  * MAL Receive Descriptor Error interrupt handler
1423  */
1424 static int
1425 emac_rxde_intr(void *arg)
1426 {
1427 	int i;
1428 	struct emac_softc *sc = arg;
1429 
1430 	EMAC_EVCNT_INCR(&sc->sc_ev_rxde);
1431 	printf("%s: emac_rxde_intr\n", sc->sc_dev.dv_xname);
1432 	/*
1433 	 * XXX!
1434 	 * This is a bit drastic; we just drop all descriptors that aren't
1435 	 * "clean".  We should probably send any that are up the stack.
1436 	 */
1437 	for (i = 0; i < EMAC_NRXDESC; i++) {
1438 		EMAC_CDRXSYNC(sc, i, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
1439 
1440 		if (sc->sc_rxdescs[i].md_data_len != MCLBYTES) {
1441 			EMAC_INIT_RXDESC(sc, i);
1442 		}
1443 
1444 	}
1445 
1446 	/* Reenable the receive channel */
1447 	mtdcr(DCR_MAL0_RXCASR, MAL0_RXCASR_CHAN0);
1448 
1449 	/* Clear the interrupt */
1450 	mtdcr(DCR_MAL0_RXDEIR, mfdcr(DCR_MAL0_RXDEIR));
1451 
1452 	return (0);
1453 }
1454 
1455 static uint32_t
1456 emac_mii_wait(struct emac_softc *sc)
1457 {
1458 	int i;
1459 	uint32_t reg;
1460 
1461 	/* wait for PHY data transfer to complete */
1462 	i = 0;
1463 	while ((reg = EMAC_READ(sc, EMAC_STACR) & STACR_OC) == 0) {
1464 		delay(7);
1465 		if (i++ > 5) {
1466 			printf("%s: MII timed out\n", sc->sc_dev.dv_xname);
1467 			return (0);
1468 		}
1469 	}
1470 	return (reg);
1471 }
1472 
1473 static int
1474 emac_mii_readreg(struct device *self, int phy, int reg)
1475 {
1476 	struct emac_softc *sc = (struct emac_softc *)self;
1477 	uint32_t sta_reg;
1478 
1479 	/* wait for PHY data transfer to complete */
1480 	if (emac_mii_wait(sc) == 0)
1481 		return (0);
1482 
1483 	sta_reg = reg << STACR_PRASHIFT;
1484 	sta_reg |= STACR_READ;
1485 	sta_reg |= phy << STACR_PCDASHIFT;
1486 
1487 	sta_reg &= ~STACR_OPBC_MASK;
1488 	sta_reg |= STACR_OPBC_50MHZ;
1489 
1490 
1491 	EMAC_WRITE(sc, EMAC_STACR, sta_reg);
1492 
1493 	if ((sta_reg = emac_mii_wait(sc)) == 0)
1494 		return (0);
1495 	sta_reg = EMAC_READ(sc, EMAC_STACR);
1496 	if ((sta_reg & STACR_PHYE) != 0)
1497 		return (0);
1498 	return (sta_reg >> STACR_PHYDSHIFT);
1499 }
1500 
1501 static void
1502 emac_mii_writereg(struct device *self, int phy, int reg, int val)
1503 {
1504 	struct emac_softc *sc = (struct emac_softc *)self;
1505 	uint32_t sta_reg;
1506 
1507 	/* wait for PHY data transfer to complete */
1508 	if (emac_mii_wait(sc) == 0)
1509 		return;
1510 
1511 	sta_reg = reg << STACR_PRASHIFT;
1512 	sta_reg |= STACR_WRITE;
1513 	sta_reg |= phy << STACR_PCDASHIFT;
1514 
1515 	sta_reg &= ~STACR_OPBC_MASK;
1516 	sta_reg |= STACR_OPBC_50MHZ;
1517 
1518 	sta_reg |= val << STACR_PHYDSHIFT;
1519 
1520 	EMAC_WRITE(sc, EMAC_STACR, sta_reg);
1521 
1522 	if ((sta_reg = emac_mii_wait(sc)) == 0)
1523 		return;
1524 	if ((sta_reg & STACR_PHYE) != 0)
1525 		/* error */
1526 		return;
1527 }
1528 
1529 static void
1530 emac_mii_statchg(struct device *self)
1531 {
1532 	struct emac_softc *sc = (void *)self;
1533 
1534 	if (sc->sc_mii.mii_media_active & IFM_FDX)
1535 		sc->sc_mr1 |= MR1_FDE;
1536 	else
1537 		sc->sc_mr1 &= ~(MR1_FDE | MR1_EIFC);
1538 
1539 	/* XXX 802.1x flow-control? */
1540 
1541 	/*
1542 	 * MR1 can only be written immediately after a reset...
1543 	 */
1544 	emac_reset(sc);
1545 }
1546 
1547 static void
1548 emac_mii_tick(void *arg)
1549 {
1550 	struct emac_softc *sc = arg;
1551 	int s;
1552 
1553 	if (!device_is_active(&sc->sc_dev))
1554 		return;
1555 
1556 	s = splnet();
1557 	mii_tick(&sc->sc_mii);
1558 	splx(s);
1559 
1560 	callout_reset(&sc->sc_callout, hz, emac_mii_tick, sc);
1561 }
1562 
1563 /* ifmedia interface function */
1564 static void
1565 emac_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr)
1566 {
1567 	struct emac_softc *sc = ifp->if_softc;
1568 
1569 	mii_pollstat(&sc->sc_mii);
1570 
1571 	ifmr->ifm_status = sc->sc_mii.mii_media_status;
1572 	ifmr->ifm_active = sc->sc_mii.mii_media_active;
1573 }
1574 
1575 /* ifmedia interface function */
1576 static int
1577 emac_mediachange(struct ifnet *ifp)
1578 {
1579 	struct emac_softc *sc = ifp->if_softc;
1580 
1581 	if (ifp->if_flags & IFF_UP)
1582 		mii_mediachg(&sc->sc_mii);
1583 	return (0);
1584 }
1585