1# $NetBSD: GENERIC,v 1.120 2013/06/30 21:38:58 rmind Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21include "arch/netwinder/conf/std.netwinder" 22 23options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25# estimated number of users 26 27maxusers 32 28 29# Standard system options 30 31options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 32#options NTP # NTP phase/frequency locked loop 33 34# Enable experimental buffer queue strategy for better responsiveness under 35# high disk I/O load. Use it with caution - it's not proven to be stable yet. 36#options BUFQ_READPRIO 37#options BUFQ_PRIOCSCAN 38 39# CPU options 40 41# For StrongARM systems 42options CPU_SA110 # Support the SA110 core 43makeoptions CPUFLAGS="-march=armv4 -mtune=strongarm" 44 45# Default console is wscons, if igsfb(4) and pckbc(4) are configured, 46# or com(4) otherwise. You can force a serial console with these options 47#options CONSDEVNAME="\"com\"",CONCOMADDR=0x3f8,CONSPEED=115200 48 49 50# File systems 51 52file-system FFS # UFS 53#file-system LFS # log-structured file system 54file-system MFS # memory file system 55file-system NFS # Network file system 56#file-system ADOSFS # AmigaDOS-compatible file system 57file-system EXT2FS # second extended file system (linux) 58#file-system CD9660 # ISO 9660 + Rock Ridge file system 59file-system MSDOSFS # MS-DOS file system 60file-system FDESC # /dev/fd 61file-system KERNFS # /kern 62file-system NULLFS # loopback file system 63file-system PROCFS # /proc 64#file-system UMAPFS # NULLFS + uid and gid remapping 65#file-system UNION # union file system 66file-system PTYFS # /dev/pts/N support 67file-system TMPFS # Efficient memory file-system 68#file-system UDF # experimental - OSTA UDF CD/DVD file-system 69 70# File system options 71#options QUOTA # legacy UFS quotas 72#options QUOTA2 # new, in-filesystem UFS quotas 73#options FFS_EI # FFS Endian Independent support 74#options FFS_NO_SNAPSHOT # No FFS snapshot support 75options NFSSERVER 76options WAPBL # File system journaling support 77#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 78 79# Networking options 80 81#options GATEWAY # packet forwarding 82options INET # IP + ICMP + TCP + UDP 83options INET6 # IPV6 84#options IPSEC # IP security 85#options IPSEC_DEBUG # debug for IP security 86#options MROUTING # IP multicast routing 87#options PIM # Protocol Independent Multicast 88#options NETATALK # AppleTalk networking 89#options PPP_BSDCOMP # BSD-Compress compression support for PPP 90#options PPP_DEFLATE # Deflate compression support for PPP 91#options PPP_FILTER # Active filter support for PPP (requires bpf) 92#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 93 94#options ALTQ # Manipulate network interfaces' output queues 95#options ALTQ_BLUE # Stochastic Fair Blue 96#options ALTQ_CBQ # Class-Based Queueing 97#options ALTQ_CDNR # Diffserv Traffic Conditioner 98#options ALTQ_FIFOQ # First-In First-Out Queue 99#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 100#options ALTQ_HFSC # Hierarchical Fair Service Curve 101#options ALTQ_LOCALQ # Local queueing discipline 102#options ALTQ_PRIQ # Priority Queueing 103#options ALTQ_RED # Random Early Detection 104#options ALTQ_RIO # RED with IN/OUT 105#options ALTQ_WFQ # Weighted Fair Queueing 106 107options NFS_BOOT_BOOTP 108options NFS_BOOT_DHCP 109#options NFS_BOOT_BOOTPARAM 110 111# Compatibility options 112 113#options COMPAT_43 # 4.3BSD compatibility. 114options COMPAT_60 # NetBSD 6.0 compatibility. 115options COMPAT_50 # NetBSD 5.0 compatibility. 116options COMPAT_40 # NetBSD 4.0 compatibility. 117options COMPAT_30 # NetBSD 3.0 compatibility. 118options COMPAT_20 # NetBSD 2.0 compatibility. 119options COMPAT_16 # NetBSD 1.6 compatibility. 120options COMPAT_15 # NetBSD 1.5 compatibility. 121options COMPAT_14 # NetBSD 1.4 compatibility. 122#options COMPAT_13 # NetBSD 1.3 compatibility. 123#options COMPAT_12 # NetBSD 1.2 compatibility. 124#options COMPAT_11 # NetBSD 1.1 compatibility. 125#options COMPAT_10 # NetBSD 1.0 compatibility. 126#options COMPAT_09 # NetBSD 0.9 compatibility. 127#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 128 129options COMPAT_LINUX # binary compatibility with Linux 130options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 131 132# Shared memory options 133 134options SYSVMSG # System V-like message queues 135options SYSVSEM # System V-like semaphores 136options SYSVSHM # System V-like memory sharing 137 138# Device options 139 140#options MEMORY_DISK_HOOKS # boottime setup of ramdisk 141#options MEMORY_DISK_ROOT_SIZE=3400 # Size in blocks 142#options MEMORY_DISK_IS_ROOT # use memory disk as root 143 144# Miscellaneous kernel options 145options KTRACE # system call tracing, a la ktrace(1) 146options IRQSTATS # manage IRQ statistics 147#options KMEMSTATS # kernel memory statistics 148#options SCSIVERBOSE # Verbose SCSI errors 149options PCIVERBOSE # Verbose PCI descriptions 150options MIIVERBOSE # Verbose MII autoconfuration messages 151#options PCI_CONFIG_DUMP # verbosely dump PCI config space 152#options DDB_KEYCODE=0x40 153options USERCONF # userconf(4) support 154#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 155options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 156 157# Development and Debugging options 158 159#options ARM700BUGTRACK # track the ARM700 swi bug 160#options PORTMASTER # Enable PortMaster only options 161#options DIAGNOSTIC # internal consistency checks 162#options PMAP_DEBUG # Enable pmap_debug_level code 163options DDB # in-kernel debugger 164options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 165makeoptions DEBUG="-g" # compile full symbol table 166options SYMTAB_SPACE=650000 167 168config netbsd root on ? type ? 169 170# The main bus device 171mainbus0 at root 172 173# The boot CPU 174cpu0 at mainbus? 175 176# Core logic 177footbridge0 at mainbus? 178 179# footbridge uart 180#fcom0 at footbridge? 181 182# system clock via footbridge 183#clock* at footbridge? 184 185# PCI bus via footbridge 186pci0 at footbridge? # PCI bus 187 188# ISA bus support 189pcib* at pci? dev ? function ? # ISA bridge 190isa* at pcib? 191 192 193# PCI IDE Controllers and Devices 194# PCI IDE controllers - see pciide(4) for supported hardware. 195# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know 196# how to set up DMA modes for this chip. This may work, or may cause 197# a machine hang with some controllers. 198#pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver 199slide* at pci? dev ? function ? # Symphony Labs IDE controllers 200 201# ATA (IDE) bus support 202atabus* at ata? 203 204# IDE drives 205# Flags are used only with controllers that support DMA operations 206# and mode settings (e.g. some pciide controllers) 207# The lowest order four bits (rightmost digit) of the flags define the PIO 208# mode to use, the next set of four bits the DMA mode and the third set the 209# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 210# to use, and the last bit must be 1 for this setting to be used. 211# For DMA and UDMA, 0xf (1111) means 'disable'. 212# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 213# (0xc=1100, 0xa=1010, 0xf=1111) 214# 0x0000 means "use whatever the drive claims to support". 215wd* at atabus? drive ? flags 0x0000 # the drives themselves 216 217# PCI network interfaces 218ne* at pci? dev ? function ? # NE2000 compat ethernet 219tlp* at pci? dev ? function ? # DECchip 21x4x (and clones) Ethernet 220options TLP_MATCH_21142 221 222# MII/PHY support 223icsphy* at mii? phy ? # ISC-189x PHYs 224ukphy* at mii? phy ? # generic unknown PHYs 225 226 227# WSCONS Support 228options WSEMUL_VT100 # VT100 / VT220 emulation 229 230# customization of console and kernel output - see dev/wscons/wsdisplayvar.h 231options WSDISPLAY_CUSTOM_OUTPUT # color customization from wsconsctl(8) 232#options WS_DEFAULT_FG=WSCOL_WHITE 233#options WS_DEFAULT_BG=WSCOL_BLACK 234#options WS_DEFAULT_COLATTR="(0)" 235#options WS_DEFAULT_MONOATTR="(0)" 236options WS_KERNEL_FG=WSCOL_GREEN 237#options WS_KERNEL_BG=WSCOL_BLACK 238options WS_KERNEL_COLATTR=WSATTR_HILIT 239#options WS_KERNEL_MONOATTR="(0)" 240 241# compatibility to other console drivers 242options WSDISPLAY_COMPAT_PCVT # emulate some ioctls 243options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 244options WSDISPLAY_COMPAT_USL # wsconscfg VT handling 245options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 246 247options FONT_GALLANT12x22 # Sun PROM font look-alike 248 249pckbc0 at isa? 250pckbd* at pckbc? 251wskbd* at pckbd? console ? 252pms* at pckbc? 253wsmouse* at pms? mux 0 254 255igsfb* at pci? dev ? function ? 256wsdisplay* at igsfb? console ? 257 258 259# ISA Devices 260com0 at isa? port 0x3f8 irq 4 261lpt0 at isa? port 0x378 irq 7 262 263 264# Audio Devices 265 266# ISA audio devices 267sb0 at isa? port 0x220 irq 3 drq 1 drq2 7 # SoundBlaster 268opl* at sb? 269mpu* at sb? 270midi* at sb? # SB1 MIDI port 271 272# Audio support 273audio* at sb? 274 275# Pseudo-Devices 276 277pseudo-device crypto # /dev/crypto device 278pseudo-device swcrypto # software crypto implementation 279 280# disk/mass storage pseudo-devices 281#pseudo-device md # memory disk device (ramdisk) 282pseudo-device vnd # disk-like interface to files 283#options VND_COMPRESSION # compressed vnd(4) 284pseudo-device fss # file system snapshot device 285#pseudo-device cgd # cryptographic disk devices 286 287# network pseudo-devices 288pseudo-device bpfilter # Berkeley packet filter 289#pseudo-device carp # Common Address Redundancy Protocol 290pseudo-device pppoe # PPP over Ethernet (RFC 2516) 291pseudo-device bridge # simple inter-network bridging 292#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 293pseudo-device loop # network loopback 294 295# 296# accept filters 297pseudo-device accf_data # "dataready" accept filter 298pseudo-device accf_http # "httpready" accept filter 299 300# miscellaneous pseudo-devices 301pseudo-device pty # pseudo-terminals 302pseudo-device clockctl # user control of clock subsystem 303pseudo-device ksyms # /dev/ksyms 304#pseudo-device pf # PF packet filter 305#pseudo-device pflog # PF log if 306 307# wscons pseudo-devices 308pseudo-device wsmux # mouse & keyboard multiplexor 309#pseudo-device wsfont 310 311# Veriexec 312# 313# a pseudo device needed for veriexec 314#pseudo-device veriexec 315# 316# Uncomment the fingerprint methods below that are desired. Note that 317# removing fingerprint methods will have almost no impact on the kernel 318# code size. 319# 320#options VERIFIED_EXEC_FP_RMD160 321#options VERIFIED_EXEC_FP_SHA256 322#options VERIFIED_EXEC_FP_SHA384 323#options VERIFIED_EXEC_FP_SHA512 324#options VERIFIED_EXEC_FP_SHA1 325#options VERIFIED_EXEC_FP_MD5 326