1 /* $NetBSD: ingenic_com.c,v 1.6 2017/05/19 07:43:31 skrll Exp $ */ 2 3 /*- 4 * Copyright (c) 2014 Michael Lorenz 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 17 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 18 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 19 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 20 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 21 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 22 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 23 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 24 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 26 * POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __KERNEL_RCSID(0, "$NetBSD: ingenic_com.c,v 1.6 2017/05/19 07:43:31 skrll Exp $"); 31 32 #include <sys/param.h> 33 #include <sys/systm.h> 34 #include <sys/device.h> 35 #include <sys/kernel.h> 36 #include <sys/termios.h> 37 #include <sys/ttydefaults.h> 38 #include <sys/types.h> 39 40 #include <sys/bus.h> 41 42 #include <dev/cons.h> 43 #include <dev/ic/comreg.h> 44 #include <dev/ic/comvar.h> 45 46 #include <mips/cpuregs.h> 47 48 #include <mips/ingenic/ingenic_var.h> 49 #include <mips/ingenic/ingenic_regs.h> 50 51 #include "opt_com.h" 52 53 #ifndef COM_REGMAP 54 #error We need COM_REGMAP 55 #endif 56 57 volatile int32_t *com0addr = (int32_t *)MIPS_PHYS_TO_KSEG1(JZ_UART0); 58 59 void ingenic_putchar_init(void); 60 void ingenic_puts(const char *); 61 void ingenic_putchar(char); 62 63 #ifndef CONMODE 64 # define CONMODE ((TTYDEF_CFLAG & ~(CSIZE | CSTOPB | PARENB)) | CS8) 65 #endif 66 67 68 void ingenic_com_cnattach(void); 69 70 static int ingenic_com_match(device_t, cfdata_t , void *); 71 static void ingenic_com_attach(device_t, device_t, void *); 72 73 struct ingenic_com_softc { 74 struct com_softc sc_com; 75 bus_space_tag_t sc_tag; 76 bus_space_handle_t sc_regh; 77 }; 78 79 CFATTACH_DECL_NEW(ingenic_com, sizeof(struct ingenic_com_softc), 80 ingenic_com_match, ingenic_com_attach, NULL, NULL); 81 82 static bus_space_handle_t regh = 0; 83 static bus_addr_t cons_com = 0; 84 static struct com_regs regs; 85 extern bus_space_tag_t apbus_memt; 86 87 void 88 ingenic_putchar_init(void) 89 { 90 /* 91 * XXX don't screw with the UART's speed until we know what clock 92 * we're on 93 */ 94 #if 0 95 int rate; 96 #endif 97 extern int comspeed(long, long, int); 98 99 com0addr = (uint32_t *)MIPS_PHYS_TO_KSEG1(JZ_UART0); 100 #if 0 101 if (comcnfreq != -1) { 102 rate = comspeed(comcnspeed, comcnfreq, COM_TYPE_INGENIC); 103 if (rate < 0) 104 return; /* XXX */ 105 #endif 106 com0addr[com_ier] = 0; 107 com0addr[com_lctl] = htole32(LCR_DLAB); 108 #if 0 109 com0addr[com_dlbl] = htole32(rate & 0xff); 110 com0addr[com_dlbh] = htole32(rate >> 8); 111 #endif 112 com0addr[com_lctl] = htole32(LCR_8BITS); /* XXX */ 113 com0addr[com_mcr] = htole32(MCR_DTR|MCR_RTS); 114 com0addr[com_fifo] = htole32( 115 FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | 116 FIFO_TRIGGER_1 | FIFO_UART_ON); 117 #if 0 118 } 119 #endif 120 } 121 122 123 void 124 ingenic_putchar(char c) 125 { 126 int timo = 150000; 127 128 while ((le32toh(com0addr[com_lsr]) & LSR_TXRDY) == 0) 129 if (--timo == 0) 130 break; 131 132 com0addr[com_data] = htole32((uint32_t)c); 133 134 while ((le32toh(com0addr[com_lsr]) & LSR_TSRE) == 0) 135 if (--timo == 0) 136 break; 137 } 138 139 void 140 ingenic_puts(const char *restrict s) 141 { 142 char c; 143 144 while ((c = *s++) != 0) 145 ingenic_putchar(c); 146 } 147 148 void 149 ingenic_com_cnattach(void) 150 { 151 int i; 152 153 bus_space_map(apbus_memt, JZ_UART0, 0x100, 0, ®h); 154 cons_com = JZ_UART0; 155 memset(®s, 0, sizeof(regs)); 156 COM_INIT_REGS(regs, apbus_memt, regh, JZ_UART0); 157 for (i = 0; i < 16; i++) { 158 regs.cr_map[i] = regs.cr_map[i] << 2; 159 } 160 regs.cr_nports = 32; 161 162 comcnattach1(®s, 115200, 48000000, COM_TYPE_INGENIC, CONMODE); 163 } 164 165 static int 166 ingenic_com_match(device_t parent, cfdata_t cfdata, void *args) 167 { 168 struct mainbusdev { 169 const char *md_name; 170 } *aa = args; 171 if (strcmp(aa->md_name, "com") == 0) return 1; 172 return 0; 173 } 174 175 176 static void 177 ingenic_com_attach(device_t parent, device_t self, void *args) 178 { 179 struct ingenic_com_softc *isc = device_private(self); 180 struct com_softc *sc = &isc->sc_com; 181 struct apbus_attach_args *aa = args; 182 int i; 183 184 sc->sc_dev = self; 185 sc->sc_frequency = 48000000; 186 sc->sc_type = COM_TYPE_INGENIC; 187 isc->sc_tag = aa->aa_bst; 188 189 if (cons_com == aa->aa_addr) { 190 isc->sc_regh = regh; 191 } else { 192 bus_space_map(apbus_memt, aa->aa_addr, 0x1000, 0, &isc->sc_regh); 193 } 194 memset(&sc->sc_regs, 0, sizeof(sc->sc_regs)); 195 COM_INIT_REGS(sc->sc_regs, aa->aa_bst, isc->sc_regh, aa->aa_addr); 196 for (i = 0; i < 16; i++) 197 sc->sc_regs.cr_map[i] = sc->sc_regs.cr_map[i] << 2; 198 sc->sc_regs.cr_nports = 32; 199 200 com_attach_subr(sc); 201 evbmips_intr_establish(aa->aa_irq, comintr, sc); 202 } 203