1 /* $NetBSD: j6x0tp.c,v 1.23 2009/04/05 02:19:57 uwe Exp $ */ 2 3 /* 4 * Copyright (c) 2003 Valeriy E. Ushakov 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. The name of the author may not be used to endorse or promote products 16 * derived from this software without specific prior written permission 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 19 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 20 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 21 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 23 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 24 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 25 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 26 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 27 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28 */ 29 30 #include <sys/cdefs.h> 31 __KERNEL_RCSID(0, "$NetBSD: j6x0tp.c,v 1.23 2009/04/05 02:19:57 uwe Exp $"); 32 33 #include <sys/param.h> 34 #include <sys/kernel.h> 35 #include <sys/device.h> 36 #include <sys/malloc.h> 37 #include <sys/systm.h> 38 #include <sys/callout.h> 39 40 #include "opt_j6x0tp.h" 41 42 #include <dev/wscons/wsconsio.h> 43 #include <dev/wscons/wsmousevar.h> 44 #include <dev/wscons/wskbdvar.h> 45 #include <dev/wscons/wsksymvar.h> 46 #include <dev/wscons/wsksymdef.h> 47 #include <dev/hpc/hpctpanelvar.h> 48 49 #include <machine/platid.h> 50 #include <machine/platid_mask.h> 51 52 #include <machine/intr.h> 53 54 #include <sh3/exception.h> 55 #include <sh3/intcreg.h> 56 #include <sh3/pfcreg.h> 57 #include <sh3/adcreg.h> 58 59 #include <sh3/dev/adcvar.h> 60 61 62 #if 0 /* XXX: disabled in favor of local version that uses printf_nolog */ 63 #define DPRINTF_ENABLE 64 #define DPRINTF_DEBUG j6x0tp_debug 65 #define DPRINTF_LEVEL 0 66 #include <machine/debug.h> 67 #else 68 #ifdef J6X0TP_DEBUG 69 volatile int j6x0tp_debug = 0; 70 #define DPRINTF_PRINTF printf_nolog 71 #define DPRINTF(arg) if (j6x0tp_debug) DPRINTF_PRINTF arg 72 #define DPRINTFN(n, arg) if (j6x0tp_debug > (n)) DPRINTF_PRINTF arg 73 #else 74 #define DPRINTF(arg) ((void)0) 75 #define DPRINTFN(n, arg) ((void)0) 76 #endif 77 #endif 78 79 80 /* 81 * PFC bits pertinent to Jornada 6x0 touchpanel 82 */ 83 #define PHDR_TP_PEN_DOWN 0x08 84 85 #define SCPDR_TP_SCAN_ENABLE 0x20 86 #define SCPDR_TP_SCAN_Y 0x02 87 #define SCPDR_TP_SCAN_X 0x01 88 89 /* 90 * A/D converter channels to get x/y from 91 */ 92 #define ADC_CHANNEL_TP_Y 1 93 #define ADC_CHANNEL_TP_X 2 94 95 /* 96 * Default (read: my device :) raw X/Y values for framebuffer edges. 97 * XXX: defopt these? 98 */ 99 #define J6X0TP_FB_LEFT 38 100 #define J6X0TP_FB_RIGHT 950 101 #define J6X0TP_FB_TOP 80 102 #define J6X0TP_FB_BOTTOM 900 103 104 /* 105 * Bottom of the n'th hard icon (n = 1..4) 106 */ 107 #define J6X0TP_HARD_ICON_MAX_Y(n) \ 108 (J6X0TP_FB_TOP + ((J6X0TP_FB_BOTTOM - J6X0TP_FB_TOP) / 4) * (n)) 109 110 111 struct j6x0tp_softc { 112 device_t sc_dev; 113 114 #define J6X0TP_WSMOUSE_ENABLED 0x01 115 #define J6X0TP_WSKBD_ENABLED 0x02 116 int sc_enabled; 117 118 int sc_hard_icon; 119 120 struct callout sc_touch_ch; 121 122 device_t sc_wsmousedev; 123 device_t sc_wskbddev; 124 125 struct tpcalib_softc sc_tpcalib; /* calibration info for wsmouse */ 126 }; 127 128 129 /* config machinery */ 130 static int j6x0tp_match(device_t, cfdata_t, void *); 131 static void j6x0tp_attach(device_t, device_t, void *); 132 133 /* wsmouse accessops */ 134 static int j6x0tp_wsmouse_enable(void *); 135 static int j6x0tp_wsmouse_ioctl(void *, u_long, void *, int, lwp_t *); 136 static void j6x0tp_wsmouse_disable(void *); 137 138 /* wskbd accessops */ 139 static int j6x0tp_wskbd_enable(void *, int); 140 static void j6x0tp_wskbd_set_leds(void *, int); 141 static int j6x0tp_wskbd_ioctl(void *, u_long, void *, int, lwp_t *); 142 143 /* internal driver routines */ 144 static void j6x0tp_enable(struct j6x0tp_softc *); 145 static void j6x0tp_disable(struct j6x0tp_softc *); 146 static int j6x0tp_enable_child(struct j6x0tp_softc *, int, int); 147 static int j6x0tp_intr(void *); 148 static void j6x0tp_start_polling(void *); 149 static void j6x0tp_stop_polling(struct j6x0tp_softc *); 150 static void j6x0tp_callout_wsmouse(void *); 151 static void j6x0tp_callout_wskbd(void *); 152 static void j6x0tp_wsmouse_input(struct j6x0tp_softc *, int, int); 153 static void j6x0tp_get_raw_xy(int *, int *); 154 static int j6x0tp_get_hard_icon(int, int); 155 156 157 static const struct wsmouse_accessops j6x0tp_accessops = { 158 j6x0tp_wsmouse_enable, 159 j6x0tp_wsmouse_ioctl, 160 j6x0tp_wsmouse_disable 161 }; 162 163 static const struct wsmouse_calibcoords j6x0tp_default_calib = { 164 0, 0, 639, 239, 165 4, 166 {{ J6X0TP_FB_LEFT, J6X0TP_FB_TOP, 0, 0 }, 167 { J6X0TP_FB_RIGHT, J6X0TP_FB_TOP, 639, 0 }, 168 { J6X0TP_FB_LEFT, J6X0TP_FB_BOTTOM, 0, 239 }, 169 { J6X0TP_FB_RIGHT, J6X0TP_FB_BOTTOM, 639, 239 }} 170 }; 171 172 static const struct wskbd_accessops j6x0tp_wskbd_accessops = { 173 j6x0tp_wskbd_enable, 174 j6x0tp_wskbd_set_leds, 175 j6x0tp_wskbd_ioctl 176 }; 177 178 179 #ifndef J6X0TP_SETTINGS_ICON_KEYSYM 180 #define J6X0TP_SETTINGS_ICON_KEYSYM KS_Home 181 #endif 182 #ifndef J6X0TP_PGUP_ICON_KEYSYM 183 #define J6X0TP_PGUP_ICON_KEYSYM KS_Prior 184 #endif 185 #ifndef J6X0TP_PGDN_ICON_KEYSYM 186 #define J6X0TP_PGDN_ICON_KEYSYM KS_Next 187 #endif 188 #ifndef J6X0TP_SWITCH_ICON_KEYSYM 189 #define J6X0TP_SWITCH_ICON_KEYSYM KS_End 190 #endif 191 192 static const keysym_t j6x0tp_wskbd_keydesc[] = { 193 KS_KEYCODE(1), J6X0TP_SETTINGS_ICON_KEYSYM, 194 KS_KEYCODE(2), J6X0TP_PGUP_ICON_KEYSYM, 195 KS_KEYCODE(3), J6X0TP_PGDN_ICON_KEYSYM, 196 KS_KEYCODE(4), J6X0TP_SWITCH_ICON_KEYSYM 197 }; 198 199 static const struct wscons_keydesc j6x0tp_wskbd_keydesctab[] = { 200 { KB_US, 0, 201 sizeof(j6x0tp_wskbd_keydesc)/sizeof(keysym_t), 202 j6x0tp_wskbd_keydesc 203 }, 204 {0, 0, 0, 0} 205 }; 206 207 static const struct wskbd_mapdata j6x0tp_wskbd_keymapdata = { 208 j6x0tp_wskbd_keydesctab, KB_US 209 }; 210 211 212 CFATTACH_DECL_NEW(j6x0tp, sizeof(struct j6x0tp_softc), 213 j6x0tp_match, j6x0tp_attach, NULL, NULL); 214 215 216 static int 217 j6x0tp_match(device_t parent, cfdata_t cf, void *aux) 218 { 219 220 /* 221 * XXX: platid_mask_MACH_HP_LX also matches 360LX. It's not 222 * confirmed whether touch panel in 360LX is connected this 223 * way. We may need to regroup platid masks. 224 */ 225 if (!platid_match(&platid, &platid_mask_MACH_HP_JORNADA_6XX) 226 && !platid_match(&platid, &platid_mask_MACH_HP_LX)) 227 return (0); 228 229 if (strcmp(cf->cf_name, "j6x0tp") != 0) 230 return (0); 231 232 return (1); 233 } 234 235 236 static void 237 j6x0tp_attach(device_t parent, device_t self, void *aux) 238 { 239 struct j6x0tp_softc *sc; 240 struct wsmousedev_attach_args wsma; 241 struct wskbddev_attach_args wska; 242 243 aprint_naive("\n"); 244 aprint_normal("\n"); 245 246 sc = device_private(self); 247 sc->sc_dev = self; 248 249 sc->sc_enabled = 0; 250 sc->sc_hard_icon = 0; 251 252 /* touch-panel as a pointing device */ 253 wsma.accessops = &j6x0tp_accessops; 254 wsma.accesscookie = sc; 255 256 sc->sc_wsmousedev = config_found_ia(self, "wsmousedev", &wsma, 257 wsmousedevprint); 258 if (sc->sc_wsmousedev == NULL) 259 return; 260 261 /* on-screen "hard icons" as a keyboard device */ 262 wska.console = 0; 263 wska.keymap = &j6x0tp_wskbd_keymapdata; 264 wska.accessops = &j6x0tp_wskbd_accessops; 265 wska.accesscookie = sc; 266 267 sc->sc_wskbddev = config_found_ia(self, "wskbddev", &wska, 268 wskbddevprint); 269 270 /* init calibration, set default parameters */ 271 tpcalib_init(&sc->sc_tpcalib); 272 tpcalib_ioctl(&sc->sc_tpcalib, WSMOUSEIO_SCALIBCOORDS, 273 (void *)__UNCONST(&j6x0tp_default_calib), 0, 0); 274 275 /* used when in polling mode */ 276 callout_init(&sc->sc_touch_ch, 0); 277 278 /* establish interrupt handler, but disable until opened */ 279 intc_intr_establish(SH7709_INTEVT2_IRQ3, IST_EDGE, IPL_TTY, 280 j6x0tp_intr, sc); 281 intc_intr_disable(SH7709_INTEVT2_IRQ3); 282 283 if (!pmf_device_register(self, NULL, NULL)) 284 aprint_error_dev(self, "unable to establish power handler\n"); 285 } 286 287 288 /* 289 * Enable touch panel: we start in interrupt mode. 290 * Must be called as spltty(). 291 */ 292 static void 293 j6x0tp_enable(struct j6x0tp_softc *sc) 294 { 295 296 DPRINTFN(2, ("%s: enable\n", device_xname(sc->sc_dev))); 297 intc_intr_enable(SH7709_INTEVT2_IRQ3); 298 } 299 300 301 /* 302 * Disable touch panel: disable interrupt, cancel pending callout. 303 * Must be called as spltty(). 304 */ 305 static void 306 j6x0tp_disable(struct j6x0tp_softc *sc) 307 { 308 309 DPRINTFN(2, ("%s: disable\n", device_xname(sc->sc_dev))); 310 intc_intr_disable(SH7709_INTEVT2_IRQ3); 311 callout_stop(&sc->sc_touch_ch); 312 } 313 314 315 static int 316 j6x0tp_enable_child(struct j6x0tp_softc *sc, int child, int on) 317 { 318 int s = spltty(); 319 320 if (on) { 321 if (!sc->sc_enabled) 322 j6x0tp_enable(sc); 323 sc->sc_enabled |= child; 324 } else { 325 sc->sc_enabled &= ~child; 326 if (!sc->sc_enabled) 327 j6x0tp_disable(sc); 328 } 329 330 splx(s); 331 return (0); 332 } 333 334 335 static int 336 j6x0tp_wsmouse_enable(void *arg) 337 { 338 struct j6x0tp_softc *sc = arg; 339 340 DPRINTFN(1, ("%s: wsmouse enable\n", device_xname(sc->sc_dev))); 341 return (j6x0tp_enable_child(sc, J6X0TP_WSMOUSE_ENABLED, 1)); 342 } 343 344 345 static void 346 j6x0tp_wsmouse_disable(void *arg) 347 { 348 struct j6x0tp_softc *sc = arg; 349 350 DPRINTFN(1, ("%s: wsmouse disable\n", device_xname(sc->sc_dev))); 351 j6x0tp_enable_child(sc, J6X0TP_WSMOUSE_ENABLED, 0); 352 } 353 354 355 static int 356 j6x0tp_wskbd_enable(void *arg, int on) 357 { 358 struct j6x0tp_softc *sc = arg; 359 360 DPRINTFN(1, ("%s: wskbd %sable\n", device_xname(sc->sc_dev), 361 on ? "en" : "dis")); 362 return (j6x0tp_enable_child(sc, J6X0TP_WSKBD_ENABLED, on)); 363 } 364 365 366 static int 367 j6x0tp_intr(void *arg) 368 { 369 struct j6x0tp_softc *sc = arg; 370 371 uint8_t irr0; 372 uint8_t phdr, touched; 373 unsigned int steady, tremor_timeout; 374 375 irr0 = _reg_read_1(SH7709_IRR0); 376 if ((irr0 & IRR0_IRQ3) == 0) { 377 #ifdef DIAGNOSTIC 378 printf("%s: irr0 %02x?\n", device_xname(sc->sc_dev), irr0); 379 #endif 380 return (0); 381 } 382 383 if (!sc->sc_enabled) { 384 DPRINTFN(1, ("%s: intr: !sc_enabled\n", 385 device_xname(sc->sc_dev))); 386 intc_intr_disable(SH7709_INTEVT2_IRQ3); 387 goto served; 388 } 389 390 391 /* 392 * Number of times the "touched" bit should be read 393 * consecutively. 394 */ 395 # define TREMOR_THRESHOLD 0x300 396 397 steady = 0; 398 tremor_timeout = TREMOR_THRESHOLD * 16; /* XXX: arbitrary */ 399 touched = PHDR_TP_PEN_DOWN; /* we start with "touched" state */ 400 401 do { 402 phdr = _reg_read_1(SH7709_PHDR); 403 404 if ((phdr & PHDR_TP_PEN_DOWN) == touched) 405 ++steady; 406 else { 407 steady = 0; 408 touched = phdr & PHDR_TP_PEN_DOWN; 409 } 410 411 if (--tremor_timeout == 0) { 412 DPRINTF(("%s: tremor timeout!\n", 413 device_xname(sc->sc_dev))); 414 goto served; 415 } 416 } while (steady < TREMOR_THRESHOLD); 417 418 if (touched) { 419 intc_intr_disable(SH7709_INTEVT2_IRQ3); 420 421 /* 422 * ADC readings are not stable yet, so schedule 423 * callout instead of accessing ADC from the interrupt 424 * handler only to immediately delay(). 425 */ 426 callout_reset(&sc->sc_touch_ch, hz/32, 427 j6x0tp_start_polling, sc); 428 } else 429 DPRINTFN(1, ("%s: tremor\n", device_xname(sc->sc_dev))); 430 served: 431 /* clear the interrupt (XXX: protect access?) */ 432 _reg_write_1(SH7709_IRR0, irr0 & ~IRR0_IRQ3); 433 434 return (1); 435 } 436 437 438 /* 439 * Called from the interrupt handler at spltty() upon first touch. 440 * Decide if we are going to report this touch as a mouse click/drag 441 * or as a key press. 442 */ 443 static void 444 j6x0tp_start_polling(void *arg) 445 { 446 struct j6x0tp_softc *sc = arg; 447 uint8_t phdr; 448 int do_mouse, do_kbd; 449 int rawx, rawy; 450 int icon; 451 452 phdr = _reg_read_1(SH7709_PHDR); 453 if ((phdr & PHDR_TP_PEN_DOWN) == 0) { 454 DPRINTFN(2, ("%s: start: pen is not down\n", 455 device_xname(sc->sc_dev))); 456 j6x0tp_stop_polling(sc); 457 } 458 459 j6x0tp_get_raw_xy(&rawx, &rawy); 460 DPRINTFN(2, ("%s: start: %4d %4d -> ", 461 device_xname(sc->sc_dev), rawx, rawy)); 462 463 do_mouse = sc->sc_enabled & J6X0TP_WSMOUSE_ENABLED; 464 #ifdef J6X0TP_WSMOUSE_EXCLUSIVE 465 if (do_mouse) 466 do_kbd = 0; 467 else 468 #endif 469 do_kbd = sc->sc_enabled & J6X0TP_WSKBD_ENABLED; 470 471 icon = 0; 472 if (do_kbd) 473 icon = j6x0tp_get_hard_icon(rawx, rawy); 474 475 if (icon != 0) { 476 DPRINTFN(2, ("icon %d\n", icon)); 477 sc->sc_hard_icon = icon; 478 wskbd_input(sc->sc_wskbddev, WSCONS_EVENT_KEY_DOWN, icon); 479 callout_reset(&sc->sc_touch_ch, hz/32, 480 j6x0tp_callout_wskbd, sc); 481 } else if (do_mouse) { 482 DPRINTFN(2, ("mouse\n")); 483 j6x0tp_wsmouse_input(sc, rawx, rawy); 484 callout_reset(&sc->sc_touch_ch, hz/32, 485 j6x0tp_callout_wsmouse, sc); 486 } else { 487 DPRINTFN(2, ("ignore\n")); 488 j6x0tp_stop_polling(sc); 489 } 490 } 491 492 493 /* 494 * Re-enable touch panel interrupt. 495 * Called as spltty() when polling code detects pen-up. 496 */ 497 static void 498 j6x0tp_stop_polling(struct j6x0tp_softc *sc) 499 { 500 uint8_t irr0; 501 502 DPRINTFN(2, ("%s: stop\n", device_xname(sc->sc_dev))); 503 504 /* clear pending interrupt signal before re-enabling the interrupt */ 505 irr0 = _reg_read_1(SH7709_IRR0); 506 if ((irr0 & IRR0_IRQ3) != 0) 507 _reg_write_1(SH7709_IRR0, irr0 & ~IRR0_IRQ3); 508 509 intc_intr_enable(SH7709_INTEVT2_IRQ3); 510 } 511 512 513 /* 514 * We are reporting this touch as a keyboard event. 515 * Poll touch screen waiting for pen-up. 516 */ 517 static void 518 j6x0tp_callout_wskbd(void *arg) 519 { 520 struct j6x0tp_softc *sc = arg; 521 uint8_t phdr; 522 int s; 523 524 s = spltty(); 525 526 if (!sc->sc_enabled) { 527 DPRINTFN(1, ("%s: wskbd callout: !sc_enabled\n", 528 device_xname(sc->sc_dev))); 529 splx(s); 530 return; 531 } 532 533 phdr = _reg_read_1(SH7709_PHDR); 534 if ((phdr & PHDR_TP_PEN_DOWN) != 0) { 535 /* 536 * Pen is still down, continue polling. Wskbd's 537 * auto-repeat takes care of repeating the key. 538 */ 539 callout_schedule(&sc->sc_touch_ch, hz/32); 540 } else { 541 wskbd_input(sc->sc_wskbddev, 542 WSCONS_EVENT_KEY_UP, sc->sc_hard_icon); 543 j6x0tp_stop_polling(sc); 544 } 545 splx(s); 546 } 547 548 549 /* 550 * We are reporting this touch as a mouse click/drag. 551 */ 552 static void 553 j6x0tp_callout_wsmouse(void *arg) 554 { 555 struct j6x0tp_softc *sc = arg; 556 uint8_t phdr; 557 int rawx, rawy; 558 int s; 559 560 s = spltty(); 561 562 if (!sc->sc_enabled) { 563 DPRINTFN(1, ("%s: wsmouse callout: !sc_enabled\n", 564 device_xname(sc->sc_dev))); 565 splx(s); 566 return; 567 } 568 569 phdr = _reg_read_1(SH7709_PHDR); 570 if ((phdr & PHDR_TP_PEN_DOWN) != 0) { 571 j6x0tp_get_raw_xy(&rawx, &rawy); 572 j6x0tp_wsmouse_input(sc, rawx, rawy); /* mouse dragged */ 573 callout_schedule(&sc->sc_touch_ch, hz/32); 574 } else { 575 wsmouse_input(sc->sc_wsmousedev, 0, 0, 0, 0, 0, /* button up */ 576 WSMOUSE_INPUT_DELTA); 577 j6x0tp_stop_polling(sc); 578 } 579 splx(s); 580 } 581 582 583 /* 584 * Report mouse click/drag. 585 */ 586 static void 587 j6x0tp_wsmouse_input(struct j6x0tp_softc *sc, int rawx, int rawy) 588 { 589 int x, y; 590 591 tpcalib_trans(&sc->sc_tpcalib, rawx, rawy, &x, &y); 592 593 DPRINTFN(3, ("%s: %4d %4d -> %3d %3d\n", 594 device_xname(sc->sc_dev), rawx, rawy, x, y)); 595 596 wsmouse_input(sc->sc_wsmousedev, 597 1, /* button */ 598 x, y, 0, 0, 599 WSMOUSE_INPUT_ABSOLUTE_X | WSMOUSE_INPUT_ABSOLUTE_Y); 600 } 601 602 603 /* 604 * Read raw X/Y coordinates from the ADC. 605 * XXX: protect accesses to SCPDR? 606 */ 607 static void 608 j6x0tp_get_raw_xy(int *rawxp, int *rawyp) 609 { 610 uint8_t scpdr; 611 612 /* Y axis */ 613 scpdr = _reg_read_1(SH7709_SCPDR); 614 scpdr |= SCPDR_TP_SCAN_ENABLE; 615 scpdr &= ~SCPDR_TP_SCAN_Y; /* pull low to scan */ 616 _reg_write_1(SH7709_SCPDR, scpdr); 617 delay(10); 618 619 *rawyp = adc_sample_channel(ADC_CHANNEL_TP_Y); 620 621 /* X axis */ 622 scpdr = _reg_read_1(SH7709_SCPDR); 623 scpdr |= SCPDR_TP_SCAN_Y; 624 scpdr &= ~SCPDR_TP_SCAN_X; /* pull low to scan */ 625 _reg_write_1(SH7709_SCPDR, scpdr); 626 delay(10); 627 628 *rawxp = adc_sample_channel(ADC_CHANNEL_TP_X); 629 630 /* restore SCPDR */ 631 scpdr = _reg_read_1(SH7709_SCPDR); 632 scpdr |= SCPDR_TP_SCAN_X; 633 scpdr &= ~SCPDR_TP_SCAN_ENABLE; 634 _reg_write_1(SH7709_SCPDR, scpdr); 635 } 636 637 638 /* 639 * Check if the (rawx, rawy) is inside one of the 4 hard icons. 640 * Return the icon number 1..4, or 0 if not inside an icon. 641 */ 642 static int 643 j6x0tp_get_hard_icon(int rawx, int rawy) 644 { 645 if (rawx <= J6X0TP_FB_RIGHT) 646 return (0); 647 648 if (rawy < J6X0TP_HARD_ICON_MAX_Y(1)) 649 return (1); 650 else if (rawy < J6X0TP_HARD_ICON_MAX_Y(2)) 651 return (2); 652 else if (rawy < J6X0TP_HARD_ICON_MAX_Y(3)) 653 return (3); 654 else 655 return (4); 656 } 657 658 659 static int 660 j6x0tp_wsmouse_ioctl(void *arg, u_long cmd, void *data, int flag, lwp_t *l) 661 { 662 struct j6x0tp_softc *sc = arg; 663 664 return hpc_tpanel_ioctl(&sc->sc_tpcalib, cmd, data, flag, l); 665 } 666 667 668 static int 669 j6x0tp_wskbd_ioctl(void *arg, u_long cmd, void *data, int flag, lwp_t *l) 670 { 671 /* struct j6x0tp_softc *sc = arg; */ 672 673 switch (cmd) { 674 case WSKBDIO_GTYPE: 675 *(int *)data = WSKBD_TYPE_HPC_BTN; /* may be use new type? */ 676 return (0); 677 678 case WSKBDIO_GETLEDS: 679 *(int *)data = 0; 680 return (0); 681 682 default: 683 return (EPASSTHROUGH); 684 } 685 } 686 687 688 static void 689 j6x0tp_wskbd_set_leds(void *arg, int leds) 690 { 691 692 /* nothing to do*/ 693 return; 694 } 695