1 /* $NetBSD: wzero3_reg.h,v 1.1 2010/04/17 13:36:21 nonaka Exp $ */ 2 3 /* 4 * Copyright (c) 2008, 2009 NONAKA Kimihiro <nonaka@netbsd.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #ifndef _HPCARM_DEV_WZERO3_REG_H_ 30 #define _HPCARM_DEV_WZERO3_REG_H_ 31 32 /* GPIO --------------------------------------------------------------------- */ 33 34 /* 35 * WS003SH/WS004SH specific parameter 36 */ 37 #define GPIO_WS003SH_SD_DETECT 9 /* In */ 38 #define GPIO_WS003SH_SLIDE 12 /* In */ 39 #define GPIO_WS003SH_FULLKEY_LED 17 /* Out: H:ON, L:OFF */ 40 #define GPIO_WS003SH_ANTENNA_LED 37 /* Out: H:ON, L:OFF */ 41 // DONT_TOUCH(RESET?) 89 /* Out */ 42 #define GPIO_WS003SH_POWER_BUTTON 95 /* In */ 43 #define GPIO_WS003SH_VIB 97 /* Out */ 44 #define GPIO_WS003SH_USB_CLIENT_DETECT 103 /* In */ 45 #define GPIO_WS003SH_SD_POWER 107 /* Out: H:ON, L:OFF */ 46 #define GPIO_WS003SH_LCD_POWER 114 /* Out: H:ON, L:OFF XXX */ 47 #define GPIO_WS003SH_AC_DETECT 115 /* In */ 48 49 /* 50 * WS007SH specific parameter 51 */ 52 #define GPIO_WS007SH_RESET_BUTTON 1 /* In: L: press, H: release */ 53 #define GPIO_WS007SH_POWER_BUTTON 9 /* In */ 54 #define GPIO_WS007SH_TOUCH_PANEL 21 /* In */ 55 #define GPIO_WS007SH_USB_CLIENT_DETECT 35 /* In */ 56 #define GPIO_WS007SH_USB_HOST_POWER 37 /* Out */ 57 #define GPIO_WS007SH_USB_HOST_DETECT 41 /* In */ 58 #define GPIO_WS007SH_SD_DETECT 48 /* In */ 59 #define GPIO_WS007SH_SLIDE 104 /* In */ 60 #define GPIO_WS007SH_SD_POWER 107 /* Out: H:ON, L:OFF */ 61 62 /* 63 * WS011SH specific parameter 64 */ 65 /* 66 port I/O(Active) name desc 67 1 I(?) RESET_BTN button detect: reset (on: release, off:press) 68 9 I(?) PWR_BTN button detect: power-on (on: press, off:release) 69 21 I(?) TPANEL touch panel (on: release, off: press) 70 37 O USBH_PWR USB Host power (H: enable, L: disable) 71 41 I(L) USBH_DET USB Host cable detect (on: remove, off: insert) 72 48 I(L) SD_DET microSD card detect (on: remove, off: insert) 73 51 I(?) SLIDE LCD slider (on: open, off: close) 74 52 I(?) KEYLOCK key lock slider (on: unlock, off:lock) 75 57 I(?) EXCRWAL_DET 76 81 I(L) EPDET earphone adapter detect (on: remove, off: insert) 77 91 I(?) FULLKEYBOARD? 78 96 I(?) JACKET_DET jacket detect (on: close, off: open) 79 ?105 I(?) WSIM_DET W-SIM detect (on: insert, off: remove) 80 ?106 I(?) WSIM? (same as GPIO#105?) 81 107 O(?) SD_PWR: SD Card power (on: on, off: off) 82 115 I(H) ACDET AC adapter detect (on: insert, off: remove) 83 116 I(?) USBC_DET USB Client cable detect (on: insert, off: remove) 84 */ 85 #define GPIO_WS011SH_RESET_BUTTON 1 /* In */ 86 #define GPIO_WS011SH_POWER_BUTTON 9 /* In */ 87 #define GPIO_WS011SH_TOUCH_PANEL 21 /* In */ 88 #define GPIO_WS011SH_USB_HOST_POWER 37 /* Out */ 89 #define GPIO_WS011SH_USB_HOST_DETECT 41 /* In */ 90 #define GPIO_WS011SH_SD_DETECT 48 /* In */ 91 #define GPIO_WS011SH_SLIDE 51 /* In */ 92 #define GPIO_WS011SH_KEY_LOCK 52 /* In */ 93 #define GPIO_WS011SH_SD_POWER 107 /* Out */ 94 #define GPIO_WS011SH_USB_CLIENT_DETECT 116 /* In */ 95 96 #endif /* _HPCARM_DEV_WZERO3_REG_H_ */ 97