1 /* $NetBSD: wzero3_reg.h,v 1.6 2010/05/30 10:00:27 nonaka Exp $ */ 2 3 /* 4 * Copyright (c) 2008, 2009, 2010 NONAKA Kimihiro <nonaka@netbsd.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #ifndef _HPCARM_DEV_WZERO3_REG_H_ 30 #define _HPCARM_DEV_WZERO3_REG_H_ 31 32 /* GPIO --------------------------------------------------------------------- */ 33 34 /* 35 * WS003SH/WS004SH specific parameter 36 */ 37 #define GPIO_WS003SH_SD_DETECT 9 /* In */ 38 #define GPIO_WS003SH_TOUCH_PANEL 11 /* In */ 39 #define GPIO_WS003SH_SLIDE 12 /* In */ 40 #define GPIO_WS003SH_FULLKEY_LED 17 /* Out: H:ON, L:OFF */ 41 #define GPIO_WS003SH_ANTENNA_LED 37 /* Out: H:ON, L:OFF */ 42 #define GPIO_WS003SH_MAX1233_CS 48 /* Out */ 43 #define GPIO_WS003SH_RESET 89 /* Out */ 44 #define GPIO_WS003SH_POWER_BUTTON 95 /* In */ 45 #define GPIO_WS003SH_VIB 97 /* Out */ 46 #define GPIO_WS003SH_USB_CLIENT_DETECT 103 /* In */ 47 #define GPIO_WS003SH_SD_POWER 107 /* Out: H:ON, L:OFF */ 48 #define GPIO_WS003SH_CHARGE 114 /* Out: H:ON, L:OFF */ 49 #define GPIO_WS003SH_AC_DETECT 115 /* In */ 50 51 /* WS003SH: GPIO OUT pin 52 * CLR: 10,16,18,19,20,21,23,33,40,56,87,90,91,104,119,120 53 * SET: 39,54,57 54 */ 55 56 /* 57 * WS007SH specific parameter 58 */ 59 #define GPIO_WS007SH_RESET_BUTTON 1 /* In: L: press, H: release */ 60 #define GPIO_WS007SH_POWER_BUTTON 9 /* In */ 61 #define GPIO_WS007SH_TOUCH_PANEL 21 /* In */ 62 #define GPIO_WS007SH_ADS7846_CS 33 /* Out */ 63 #define GPIO_WS007SH_USB_CLIENT_DETECT 35 /* In */ 64 #define GPIO_WS007SH_USB_HOST_POWER 37 /* Out */ 65 #define GPIO_WS007SH_USB_HOST_DETECT 41 /* In */ 66 #define GPIO_WS007SH_SD_DETECT 48 /* In */ 67 #define GPIO_WS007SH_HSYNC 75 /* In */ 68 #define GPIO_WS007SH_SLIDE 104 /* In */ 69 #define GPIO_WS007SH_SD_POWER 107 /* Out: H:ON, L:OFF */ 70 71 /* 72 * WS011SH specific parameter 73 */ 74 /* 75 port I/O(Active) name desc 76 1 I(?) RESET_BTN button detect: reset (on: release, off:press) 77 9 I(?) PWR_BTN button detect: power-on (on: press, off:release) 78 21 I(?) TPANEL touch panel (on: release, off: press) 79 37 O USBH_PWR USB Host power (H: enable, L: disable) 80 41 I(L) USBH_DET USB Host cable detect (on: remove, off: insert) 81 48 I(L) SD_DET microSD card detect (on: remove, off: insert) 82 51 I(?) SLIDE LCD slider (on: open, off: close) 83 52 I(?) KEYLOCK key lock slider (on: unlock, off:lock) 84 57 I(?) EXCRWAL_DET 85 81 I(L) EPDET earphone adapter detect (on: remove, off: insert) 86 91 I(?) FULLKEYBOARD? 87 96 I(?) JACKET_DET jacket detect (on: close, off: open) 88 ?105 I(?) WSIM_DET W-SIM detect (on: insert, off: remove) 89 ?106 I(?) WSIM? (same as GPIO#105?) 90 107 O(?) SD_PWR: SD Card power (on: on, off: off) 91 115 I(H) ACDET AC adapter detect (on: insert, off: remove) 92 116 I(?) USBC_DET USB Client cable detect (on: insert, off: remove) 93 */ 94 #define GPIO_WS011SH_RESET_BUTTON 1 /* In */ 95 #define GPIO_WS011SH_POWER_BUTTON 9 /* In */ 96 #define GPIO_WS011SH_KEYPAD 14 /* In */ 97 #define GPIO_WS011SH_TOUCH_PANEL 21 /* In */ 98 #define GPIO_WS011SH_AK4184_CS 33 /* Out */ 99 #define GPIO_WS011SH_USB_HOST_POWER 37 /* Out */ 100 #define GPIO_WS011SH_USB_HOST_DETECT 41 /* In */ 101 #define GPIO_WS011SH_SD_DETECT 48 /* In */ 102 #define GPIO_WS011SH_SLIDE 51 /* In */ 103 #define GPIO_WS011SH_KEY_LOCK 52 /* In */ 104 #define GPIO_WS011SH_HSYNC 75 /* In */ 105 #define GPIO_WS011SH_SD_POWER 107 /* Out */ 106 #define GPIO_WS011SH_USB_CLIENT_DETECT 116 /* In */ 107 108 /* 109 * WS020SH specific parameter 110 */ 111 #define GPIO_WS020SH_RESET_BUTTON 1 /* In */ 112 #define GPIO_WS020SH_TOUCH_PANEL 21 /* In */ 113 #define GPIO_WS020SH_USB_HOST_DETECT 41 /* In */ 114 #define GPIO_WS020SH_SD_DETECT 48 /* In */ 115 #define GPIO_WS020SH_SLIDE 51 /* In */ 116 #define GPIO_WS020SH_KEY_LOCK 52 /* In */ 117 #define GPIO_WS020SH_POWER_BUTTON 55 /* In */ 118 #define GPIO_WS020SH_SD_POWER 107 /* Out */ 119 #define GPIO_WS020SH_USB_CLIENT_DETECT 116 /* In */ 120 121 #endif /* _HPCARM_DEV_WZERO3_REG_H_ */ 122