xref: /netbsd-src/sys/arch/hp300/dev/dcmreg.h (revision cda4f8f6ee55684e8d311b86c99ea59191e6b74f)
1 /*
2  * Copyright (c) 1988 University of Utah.
3  * Copyright (c) 1982, 1986, 1990 The Regents of the University of California.
4  * All rights reserved.
5  *
6  * This code is derived from software contributed to Berkeley by
7  * the Systems Programming Group of the University of Utah Computer
8  * Science Department.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. All advertising materials mentioning features or use of this software
19  *    must display the following acknowledgement:
20  *	This product includes software developed by the University of
21  *	California, Berkeley and its contributors.
22  * 4. Neither the name of the University nor the names of its contributors
23  *    may be used to endorse or promote products derived from this software
24  *    without specific prior written permission.
25  *
26  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
27  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
28  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
29  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
30  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
31  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
32  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
33  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
34  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
35  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
36  * SUCH DAMAGE.
37  *
38  * from: Utah $Hdr: dcmreg.h 1.1 90/07/09$
39  *
40  *	@(#)dcmreg.h	7.4 (Berkeley) 11/4/90
41  */
42 
43 struct dcmdevice {	   /* host address, only odd bytes addressed */
44 	u_char	dcm_pad0;
45 	volatile u_char	dcm_rsid;	/* Reset / ID			0001 */
46 	u_char	dcm_pad1;
47 	volatile u_char	dcm_ic;		/* Interrupt control register	0003 */
48 	u_char	dcm_pad2;
49 	volatile u_char	dcm_sem;	/* Semaphore register		0005 */
50 	u_char  dcm_pad3[0x7ffa];	/* Unaddressable	0006-7fff */
51 	u_char	dcm_pad4;
52 	volatile u_char	dcm_iir;	/* Interrupt ident register	8001 */
53 	u_char	dcm_pad5;
54 	volatile u_char	dcm_cr;		/* Command register		8003 */
55 	u_char  dcm_pad6[0x3fc];	/* Card scratch		8004-83ff */
56 	struct	dcmrfifo {
57 		u_char	ptr_pad1;
58 		volatile u_char	data_char;
59 		u_char	ptr_pad2;
60 		volatile u_char	data_stat;
61 	} dcm_rfifos[4][0x80];		/* Receive queues		8400 */
62 	struct  {
63 		u_char	ptr_pad1;
64 		volatile u_char	data_data;
65 	} dcm_bmap[0x100];		/* Bitmap table			8c00 */
66 	struct  {
67 		u_char	ptr_pad;
68 		volatile u_char	ptr;
69 	} dcm_rhead[4];			/* Fifo head - receive		8e00 */
70 	struct  {
71 		u_char  ptr_pad;
72 		volatile u_char  ptr;
73 	} dcm_rtail[4];			/* Fifo tail - receive		8e08 */
74 	struct  {
75 		u_char	ptr_pad;
76 		volatile u_char	ptr;
77 	} dcm_thead[4];			/* Fifo head - transmit		8e10 */
78 	struct  {
79 		u_char	ptr_pad;
80 		volatile u_char	ptr;
81 	} dcm_ttail[4];			/* Fifo tail - transmit		8e18 */
82 	struct  {
83 		u_char	pad1;
84 		volatile u_char	dcm_conf;
85 		u_char	pad2;
86 		volatile u_char	dcm_baud;
87 	} dcm_data[4];			/* Configuration registers	8e20 */
88 	struct	modemreg {
89 		u_char	pad0;
90 		volatile u_char  mdmin;		/* Modem in		8e31 */
91 		u_char  pad1;
92 		volatile u_char  mdmout;	/* Modem out		8e33 */
93 		u_char  pad2;
94 		volatile u_char  mdmmsk;	/* Modem mask		8e35 */
95 	} dcm_modem0;
96 	struct  {
97 		u_char pad1;
98 		volatile u_char dcm_data;
99 	} dcm_cmdtab[4];		/* Command tables		8e36 */
100 	struct  {
101 		u_char pad1;
102 		volatile u_char dcm_data;
103 	} dcm_icrtab[4];		/* Interrupt data		8e3e */
104 	u_char  dcm_pad10;
105 	volatile u_char  dcm_stcon;	/* Self test condition		8e47 */
106 	struct modemreg dcm_modem1;	/* 638 Modem port1		8e48 */
107 	struct modemreg dcm_modem2;	/* 638 Modem port2		8e4e */
108 	struct modemreg dcm_modem3;	/* 638 Modem port3		8e54 */
109 	u_char	dcm_pad11;
110 	volatile u_char	dcm_modemchng;	/* 638 Modem change mask	8e5b */
111 	u_char	dcm_pad12;
112 	volatile u_char	dcm_modemintr;	/* 638 Modem interrupt mask	8e5d */
113 	u_char  dcm_pad13[0x82];	/* Undef Shared Ram	8e5e-8edf */
114 	struct	dcmtfifo {
115 	    u_char  ptr_pad1;
116 	    volatile u_char  data_char;
117 	} dcm_tfifos[4][0x10];		/* Transmit queues		8ee0 */
118 };
119 
120 /*
121  * Overlay structure for port specific queue "registers".
122  * Starts at offset 0x8E00+(port*2).
123  */
124 struct	dcmpreg {
125 	u_char		pad0;		/* +00 */
126 	volatile u_char	r_head;		/* +01 */
127 	u_char		pad1[7];	/* +02 */
128 	volatile u_char	r_tail;		/* +09 */
129 	u_char		pad2[7];	/* +0A */
130 	volatile u_char	t_head;		/* +11 */
131 	u_char		pad3[7];	/* +12 */
132 	volatile u_char	t_tail;		/* +19 */
133 };
134 #define	dcm_preg(d, p)	((struct dcmpreg *)((u_int)(d)+0x8e00+(p)*2))
135 
136 /* interface reset/id */
137 #define DCMCON          0x80	/* REMOTE/LOCAL switch, read */
138 #define	DCMID		0x5	/* hardwired card id, read */
139 #define	DCMRS		0x80	/* software reset, write */
140 
141 /* interrupt control */
142 #define	DCMIPL(x)	((((x) >> 4) & 3) + 3)	/* interupt level, read */
143 #define	IC_IR		0x40	/* interupt request, read */
144 #define	IC_IE		0x80	/* interupt enable, write */
145 #define	IC_ID		0x00	/* interupt disable, write */
146 
147 
148 /* Semaphore control */
149 #define	SEM_BSY		0x80	/* read */
150 #define SEM_CLR         0xFF	/* write */
151 #define SEM_LOCK(dcm)	while ((dcm)->dcm_sem & SEM_BSY)
152 #define SEM_UNLOCK(dcm)	(dcm)->dcm_sem = SEM_CLR
153 
154 /* command register */
155 #define	CR_PORT0	0x1
156 #define	CR_PORT1	0x2
157 #define	CR_PORT2	0x4
158 #define	CR_PORT3	0x8
159 #define	CR_MODM		0x10	/* change modem output lines */
160 #define	CR_TIMER	0x20	/* 16ms interrupt timer toggle */
161 #define	CR_SELFT	0x40	/* run self test */
162 #define CR_MASK		0x7f
163 
164 /* interrupt ident register */
165 #define	IIR_PORT0	0x1
166 #define	IIR_PORT1	0x2
167 #define	IIR_PORT2	0x4
168 #define	IIR_PORT3	0x8
169 #define	IIR_SELFT	0x10	/* self test completed */
170 #define	IIR_MODM	0x20	/* change in modem input lines */
171 #define	IIR_TIMEO	0x40	/* Time out */
172 #define IIR_MASK	0x7f
173 
174 /* self test cond reg */
175 #define ST_OK           0xe0
176 
177 /* Line configuration register */
178 #define	LC_PNO		0x00
179 #define	LC_PODD		0x01
180 #define	LC_PEVEN	0x02
181 #define	LC_PMSK		0x03
182 
183 #define	LC_1STOP	0x00
184 #define	LC_1HSTOP	0x04
185 #define	LC_2STOP	0x08
186 #define	LC_STOPMSK	0x0b
187 
188 #define	LC_8BITS	0x30
189 #define	LC_7BITS	0x20
190 #define	LC_6BITS	0x10
191 #define	LC_5BITS	0x00
192 #define	LC_BITMSK	0x30
193 
194 /* baud reg */
195 #define BR_0		0x00
196 #define BR_50		0x01
197 #define BR_75		0x02
198 #define BR_110		0x03
199 #define BR_134  	0x04
200 #define BR_150		0x05
201 #define BR_300		0x06
202 #define BR_600		0x07
203 #define BR_900		0x08
204 #define BR_1200		0x09
205 #define BR_1800		0x0a
206 #define BR_2400		0x0b
207 #define BR_3600		0x0c
208 #define BR_4800		0x0d
209 #define BR_7200		0x0e
210 #define BR_9600		0x0f
211 #define BR_19200	0x10
212 #define BR_38400	0x11
213 
214 /* modem input register */
215 #define	MI_CTS		0x08
216 #define	MI_DM		0x04
217 #define	MI_CD		0x02
218 #define	MI_RI		0x01
219 
220 /* modem output register */
221 #define	MO_SR		0x04
222 #define	MO_DTR		0x02
223 #define	MO_RTS		0x01
224 #define	MO_ON		((MO_DTR) | (MO_RTS))
225 #define	MO_OFF		0x00
226 
227 /* cmd-tab values, write */
228 #define CT_CON		0x1	/* configuration change */
229 #define CT_TX		0x2	/* transmit buffer not empty */
230 #define CT_BRK		0x4	/* toggle BREAK */
231 
232 /* icr-tab values, read */
233 #define IT_TX		0x1	/* transmit buffer empty */
234 #define IT_SPEC		0x2	/* special character received */
235 
236 /* data errors */
237 #define RD_OVF		0x08
238 #define RD_BD		0x10
239 #define RD_PE		0x20
240 #define RD_OE		0x40
241 #define RD_FE		0x80
242 #define RD_MASK		0xf8
243 
244 /* Transmit/Receive masks */
245 #define TX_MASK		0x0f
246 #define RX_MASK		0xff
247 
248 /*
249  * WARNING: Serial console is assumed to be the lowest select-code card
250  * and that card must be logical unit 0 in the kernel.  Also, CONUNIT must
251  * be 1, the port affected by the REMOTE/LOCAL switch.
252  */
253 #define CONUNIT	(1)
254