xref: /netbsd-src/sys/arch/evbppc/walnut/autoconf.c (revision e5548b402ae4c44fb816de42c7bba9581ce23ef5)
1 /*	$NetBSD: autoconf.c,v 1.8 2005/12/11 12:17:13 christos Exp $	*/
2 
3 /*
4  * Copyright (C) 1995, 1996 Wolfgang Solfrank.
5  * Copyright (C) 1995, 1996 TooLs GmbH.
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. All advertising materials mentioning features or use of this software
17  *    must display the following acknowledgement:
18  *	This product includes software developed by TooLs GmbH.
19  * 4. The name of TooLs GmbH may not be used to endorse or promote products
20  *    derived from this software without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY TOOLS GMBH ``AS IS'' AND ANY EXPRESS OR
23  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
24  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
25  * IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
27  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
28  * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
29  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
30  * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
31  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32  */
33 
34 #include <sys/cdefs.h>
35 __KERNEL_RCSID(0, "$NetBSD: autoconf.c,v 1.8 2005/12/11 12:17:13 christos Exp $");
36 
37 #include <sys/param.h>
38 #include <sys/conf.h>
39 #include <sys/device.h>
40 #include <sys/systm.h>
41 
42 #include <dev/ic/comreg.h>	/* For COM_FREQ */
43 
44 #include <powerpc/ibm4xx/dcr405gp.h>
45 #include <powerpc/ibm4xx/dev/plbvar.h>
46 
47 /*
48  * List of port-specific devices to attach to the processor local bus.
49  */
50 static const struct plb_dev local_plb_devs [] = {
51 	{ "pbus", },
52 	{ NULL }
53 };
54 
55 /*
56  * Determine device configuration for a machine.
57  */
58 void
59 cpu_configure(void)
60 {
61 
62 	intr_init();
63 	calc_delayconst();
64 
65 	/* Make sure that timers run at CPU frequency */
66 	mtdcr(DCR_CPC0_CR1, mfdcr(DCR_CPC0_CR1) & ~CPC0_CR1_CETE);
67 
68 	if (config_rootfound("plb", &local_plb_devs) == NULL)
69 		panic("configure: plb not configured");
70 
71 	printf("biomask %x netmask %x ttymask %x\n", (u_short)imask[IPL_BIO],
72 	    (u_short)imask[IPL_NET], (u_short)imask[IPL_TTY]);
73 
74 	(void)spl0();
75 
76 	/*
77 	 * Now allow hardware interrupts.
78 	 */
79 	asm volatile ("wrteei 1");
80 }
81 
82 /*
83  * Setup root device.
84  * Configure swap area.
85  */
86 void
87 cpu_rootconf(void)
88 {
89 
90 	setroot(booted_device, booted_partition);
91 }
92 
93 void
94 device_register(struct device *dev, void *aux)
95 {
96 	struct device *parent = dev->dv_parent;
97 
98 	if (strcmp(dev->dv_cfdata->cf_name, "com") == 0 &&
99 	    strcmp(parent->dv_cfdata->cf_name, "opb") == 0) {
100 		/* Set the frequency of the on-chip UART. */
101 		int freq = COM_FREQ * 6;
102 
103 		if (prop_set(dev_propdb, dev, "frequency",
104 			     &freq, sizeof(freq), PROP_INT, 0) != 0)
105 			printf("WARNING: unable to set frequency "
106 			    "property for %s\n", dev->dv_xname);
107 		return;
108 	}
109 
110 	if (strcmp(dev->dv_cfdata->cf_name, "emac") == 0 &&
111 	    strcmp(parent->dv_cfdata->cf_name, "opb") == 0) {
112 		/* Set the mac-addr of the on-chip Ethernet. */
113 		/* XXX 405GP only has one; what about CPUs with two? */
114 		if (prop_set(dev_propdb, dev, "mac-addr",
115 			     &board_data.mac_address_local,
116 			     sizeof(board_data.mac_address_local),
117 			     PROP_CONST, 0) != 0)
118 			printf("WARNING: unable to set mac-addr "
119 			    "property for %s\n", dev->dv_xname);
120 		return;
121 	}
122 }
123