xref: /netbsd-src/sys/arch/evbarm/netwalker/netwalker_lcd.c (revision 413d532bcc3f62d122e56d92e13ac64825a40baf)
1 /*	$NetBSD: netwalker_lcd.c,v 1.2 2014/03/16 05:20:24 dholland Exp $	*/
2 
3 /*-
4  * Copyright (c) 2011, 2012 Genetec corp. All rights reserved.
5  * Written by Hashimoto Kenichi for Genetec corp.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
17  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
18  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
19  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
20  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
21  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
22  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
23  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
24  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
25  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
26  * POSSIBILITY OF SUCH DAMAGE.
27  */
28 #include <sys/param.h>
29 #include <sys/systm.h>
30 #include <sys/conf.h>
31 #include <sys/uio.h>
32 #include <sys/malloc.h>
33 #include <sys/device.h>
34 
35 #include <dev/cons.h>
36 #include <dev/wscons/wsconsio.h>
37 #include <dev/wscons/wsdisplayvar.h>
38 #include <dev/wscons/wscons_callbacks.h>
39 
40 #include <sys/bus.h>
41 #include <arm/imx/imx51var.h>
42 #include <arm/imx/imx51reg.h>
43 #include <arm/imx/imx51_ipuv3var.h>
44 #include <arm/imx/imx51_ipuv3reg.h>
45 #include <arm/imx/imx51_iomuxreg.h>
46 #include <arm/imx/imxgpiovar.h>
47 
48 #include "opt_imx51_ipuv3.h"
49 #include "opt_netwalker_lcd.h"
50 
51 #include "wsdisplay.h"
52 #include "ioconf.h"
53 
54 int lcd_match(device_t, cfdata_t, void *);
55 void lcd_attach(device_t, device_t, void *);
56 
57 void netwalker_cnattach(void);
58 
59 #if NWSDISPLAY > 0
60 #else
61 #ifdef LCD_DEBUG
62 static void draw_test_pattern(struct imx51_ipuv3_softc *,
63     struct imx51_ipuv3_screen *);
64 #endif
65 
66 /*
67  * Interface to LCD framebuffer without wscons
68  */
69 extern struct cfdriver ipu_cd;
70 
71 dev_type_open(lcdopen);
72 dev_type_close(lcdclose);
73 dev_type_ioctl(lcdioctl);
74 dev_type_mmap(lcdmmap);
75 const struct cdevsw ipu_cdevsw = {
76 	.d_open = lcdopen,
77 	.d_close = lcdclose,
78 	.d_read = noread,
79 	.d_write = nowrite,
80 	.d_ioctl = lcdioctl,
81 	.d_stop = nostop,
82 	.d_tty = notty,
83 	.d_poll = nopoll,
84 	.d_mmap = lcdmmap,
85 	.d_kqfilter = nokqfilter,
86 	.d_flag = D_TTY
87 };
88 
89 #endif
90 
91 CFATTACH_DECL_NEW(lcd_netwalker, sizeof (struct imx51_ipuv3_softc),
92     lcd_match, lcd_attach, NULL, NULL);
93 
94 int
95 lcd_match( device_t parent, cfdata_t cf, void *aux )
96 {
97 	return 1;
98 }
99 
100 /* Sharp's LCD */
101 static const struct lcd_panel_geometry sharp_panel =
102 {
103 	.panel_width = 1024,	/* Width */
104 	.panel_height = 600,	/* Height */
105 
106 	.pixel_clk = 30076000,
107 
108 	.hsync_width = 8,
109 	.left  = 20,
110 	.right = 20,
111 
112 	.vsync_width = 4,
113 	.upper = 2,
114 	.lower = 2,
115 
116 	.panel_info = 0,
117 };
118 
119 #define PANEL	sharp_panel
120 
121 void lcd_attach( device_t parent, device_t self, void *aux )
122 {
123 	struct imx51_ipuv3_softc *sc = device_private(self);
124 	struct axi_attach_args *axia = aux;
125 	bus_space_tag_t iot = axia->aa_iot;
126 
127 	sc->dev = self;
128 
129 #if (NWSDISPLAY > 0) && defined(IMXIPUCONSOLE)
130 	netwalker_cnattach();
131 #endif
132 
133 #if 0
134 	/* IOMUX registers are already set correctly for LCD display */
135 	iomux_mux_config(iomux_ipuv3_config);
136 #endif
137 
138 	/* XXX move this to imx51_ipuv3.c */
139 	{
140 		bus_space_handle_t mipi_ioh;
141 		uint32_t reg;
142 
143 		if (bus_space_map(iot, 0x83fdc000, 0x1000, 0, &mipi_ioh))
144 			aprint_error_dev(self, "can't map MIPI HSC");
145 		else {
146 			bus_space_write_4(iot, mipi_ioh, 0x000, 0xf00);
147 
148 			reg = bus_space_read_4(iot, mipi_ioh, 0x800);
149 			bus_space_write_4(iot, mipi_ioh, 0x800, reg | 0x0ff);
150 
151 			reg = bus_space_read_4(iot, mipi_ioh, 0x800);
152 			bus_space_write_4(iot, mipi_ioh, 0x800, reg | 0x10000);
153 		}
154 	}
155 
156 	/* LCD power on */
157 	gpio_set_direction(GPIO_NO(4, 9), GPIO_DIR_OUT);
158 	gpio_set_direction(GPIO_NO(4, 10), GPIO_DIR_OUT);
159 	gpio_set_direction(GPIO_NO(3, 3), GPIO_DIR_OUT);
160 
161 	gpio_data_write(GPIO_NO(3, 3), 1);
162 	gpio_data_write(GPIO_NO(4, 9), 1);
163 	delay(180 * 1000);
164 	gpio_data_write(GPIO_NO(4, 10), 1);
165 
166 	/* pwm pin (100%) */
167 	gpio_set_direction(GPIO_NO(1, 2), GPIO_DIR_OUT);
168 	gpio_data_write(GPIO_NO(1, 2), 1);
169 
170 	gpio_set_direction(GPIO_NO(2, 13), GPIO_DIR_OUT);
171 	gpio_data_write(GPIO_NO(2, 13), 1);
172 
173 	imx51_ipuv3_attach_sub(sc, aux, &PANEL);
174 
175 #if NWSDISPLAY == 0
176 	{
177 		struct imx51_ipuv3_screen *screen;
178 		int error;
179 
180 		error = imx51_ipuv3_new_screen(sc, 16, &screen);
181 #ifdef LCD_DEBUG
182 		draw_test_pattern(sc, screen);
183 #endif
184 		if (error == 0) {
185 			sc->active = screen;
186 			imx51_ipuv3_start_dma(sc, screen);
187 		}
188 	}
189 #endif
190 }
191 
192 #if NWSDISPLAY > 0
193 void
194 netwalker_cnattach(void)
195 {
196 	imx51_ipuv3_cnattach(&PANEL);
197 	return;
198 }
199 #else
200 
201 int
202 lcdopen(dev_t dev, int oflags, int devtype, struct lwp *l)
203 {
204 	return 0;
205 }
206 
207 int
208 lcdclose(dev_t dev, int fflag, int devtype, struct lwp *l)
209 {
210 	return 0;
211 }
212 
213 paddr_t
214 lcdmmap(dev_t dev, off_t offset, int size)
215 {
216 	struct imx51_ipuv3_softc *sc =
217 	    device_lookup_private(&ipu_cd, minor(dev));
218 	struct imx51_ipuv3_screen *scr = sc->active;
219 
220 	return bus_dmamem_mmap(sc->dma_tag, scr->segs, scr->nsegs,
221 	    offset, 0, BUS_DMA_WAITOK|BUS_DMA_COHERENT);
222 }
223 
224 int
225 lcdioctl(dev_t dev, u_long cmd, void *data,
226     int fflag, struct lwp *l)
227 {
228 	return EOPNOTSUPP;
229 }
230 
231 #ifdef LCD_DEBUG
232 static void
233 draw_test_pattern(struct imx51_ipuv3_softc *sc,
234     struct imx51_ipuv3_screen *scr)
235 {
236 	int x, y;
237 	uint16_t color, *line;
238 	char *buf = (char *)(scr->buf_va);
239 
240 	printf("%s: buf_va %p, size 0x%x\n", __func__, buf,
241 	       (uint)scr->buf_size);
242 	printf("%s: panel %d x %d\n", __func__,
243 	    sc->geometry->panel_width,
244 	    sc->geometry->panel_height);
245 #define	rgb(r,g,b)	(((r)<<11) | ((g)<<5) | (b))
246 
247 	for (y=0; y < sc->geometry->panel_height; ++y) {
248 		line = (uint16_t *)(buf + scr->stride * y);
249 
250 		for (x=0; x < sc->geometry->panel_width; ++x) {
251 			switch (((x/30) + (y/10)) % 8) {
252 			default:
253 			case 0: color = rgb(0x00, 0x00, 0x00); break;
254 			case 1: color = rgb(0x00, 0x00, 0x1f); break;
255 			case 2: color = rgb(0x00, 0x3f, 0x00); break;
256 			case 3: color = rgb(0x00, 0x3f, 0x1f); break;
257 			case 4: color = rgb(0x1f, 0x00, 0x00); break;
258 			case 5: color = rgb(0x1f, 0x00, 0x1f); break;
259 			case 6: color = rgb(0x1f, 0x3f, 0x00); break;
260 			case 7: color = rgb(0x1f, 0x3f, 0x1f); break;
261 			}
262 
263 			line[x] = color;
264 		}
265 	}
266 
267 	for (x=0; x < MIN(sc->geometry->panel_height,
268 		sc->geometry->panel_width); ++x) {
269 		line = (uint16_t *)(buf + scr->stride * x);
270 		line[x] = rgb(0x1f, 0x3f, 0x1f);
271 	}
272 }
273 #endif
274 
275 #endif /* NWSDISPLAY > 0 */
276 
277 
278