xref: /netbsd-src/sys/arch/evbarm/lubbock/lubbock_lcd.c (revision b7b7574d3bf8eeb51a1fa3977b59142ec6434a55)
1 /* $NetBSD: lubbock_lcd.c,v 1.14 2014/03/16 05:20:24 dholland Exp $ */
2 
3 /*
4  * Copyright (c) 2002, 2003  Genetec Corporation.  All rights reserved.
5  * Written by Hiroyuki Bessho for Genetec Corporation.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. The name of Genetec Corporation may not be used to endorse or
16  *    promote products derived from this software without specific prior
17  *    written permission.
18  *
19  * THIS SOFTWARE IS PROVIDED BY GENETEC CORPORATION ``AS IS'' AND
20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL GENETEC CORPORATION
23  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29  * POSSIBILITY OF SUCH DAMAGE.
30  */
31 
32 /*
33  * LCD driver for Intel Lubbock.
34  *
35  * Controlling LCD is almost completely done through PXA2X0's
36  * integrated LCD controller.  Codes for it is arm/xscale/pxa2x0_lcd.c.
37  *
38  * Codes in this file provide platform specific things including:
39  *   LCD on/off switch in on-board PLD register.
40  *   LCD panel geometry
41  */
42 #include <sys/cdefs.h>
43 __KERNEL_RCSID(0, "$NetBSD: lubbock_lcd.c,v 1.14 2014/03/16 05:20:24 dholland Exp $");
44 
45 #include <sys/param.h>
46 #include <sys/systm.h>
47 #include <sys/conf.h>
48 #include <sys/uio.h>
49 #include <sys/malloc.h>
50 
51 #include <dev/cons.h>
52 #include <dev/wscons/wsconsio.h>
53 #include <dev/wscons/wsdisplayvar.h>
54 #include <dev/wscons/wscons_callbacks.h>
55 
56 #include <sys/bus.h>
57 #include <arm/xscale/pxa2x0var.h>
58 #include <arm/xscale/pxa2x0reg.h>
59 #include <arm/xscale/pxa2x0_lcd.h>
60 
61 #include <arch/evbarm/lubbock/lubbock_reg.h>
62 #include <arch/evbarm/lubbock/lubbock_var.h>
63 
64 #include "wsdisplay.h"
65 
66 int	lcd_match(device_t, cfdata_t, void *);
67 void	lcd_attach(device_t, device_t, void *);
68 int	lcdintr(void *);
69 
70 #if NWSDISPLAY > 0
71 
72 /*
73  * wsdisplay glue
74  */
75 struct pxa2x0_wsscreen_descr lcd_bpp16_screen = {
76 	{
77 		"bpp16", 0, 0,
78 		&pxa2x0_lcd_emulops,
79 		0, 0,
80 		WSSCREEN_WSCOLORS,
81 	},
82 	16				/* bits per pixel */
83 }, lcd_bpp8_screen = {
84 	{
85 		"bpp8", 0, 0,
86 		&pxa2x0_lcd_emulops,
87 		0, 0,
88 		WSSCREEN_WSCOLORS,
89 	},
90 	8				/* bits per pixel */
91 }, lcd_bpp4_screen = {
92 	{
93 		"bpp4", 0, 0,
94 		&pxa2x0_lcd_emulops,
95 		0, 0,
96 		WSSCREEN_WSCOLORS,
97 	},
98 	4				/* bits per pixel */
99 };
100 
101 
102 static const struct wsscreen_descr *lcd_scr_descr[] = {
103 #if 0
104 	/* bpp4 needs a patch to rasops4 */
105 	&lcd_bpp4_screen.c,
106 #endif
107 	&lcd_bpp8_screen.c,
108 	&lcd_bpp16_screen.c,
109 };
110 
111 const struct wsscreen_list lcd_screen_list = {
112 	sizeof lcd_scr_descr / sizeof lcd_scr_descr[0],
113 	lcd_scr_descr
114 };
115 
116 int	lcd_ioctl(void *, void *, u_long, void *, int, struct lwp *);
117 
118 int	lcd_show_screen(void *, void *, int,
119 	    void (*)(void *, int, int), void *);
120 
121 const struct wsdisplay_accessops lcd_accessops = {
122 	lcd_ioctl,
123 	pxa2x0_lcd_mmap,
124 	pxa2x0_lcd_alloc_screen,
125 	pxa2x0_lcd_free_screen,
126 	lcd_show_screen,
127 	NULL, /* load_font */
128 };
129 
130 #else
131 /*
132  * Interface to LCD framebuffer without wscons
133  */
134 dev_type_open(lcdopen);
135 dev_type_close(lcdclose);
136 dev_type_ioctl(lcdioctl);
137 dev_type_mmap(lcdmmap);
138 const struct cdevsw lcd_cdevsw = {
139 	.d_open = lcdopen,
140 	.d_close = lcdclose,
141 	.d_read = noread,
142 	.d_write = nowrite,
143 	.d_ioctl = lcdioctl,
144 	.d_stop = nostop,
145 	.d_tty = notty,
146 	.d_poll = nopoll,
147 	.d_mmap = lcdmmap,
148 	.d_kqfilter = nokqfilter,
149 	.d_flag = D_TTY
150 };
151 
152 #endif
153 
154 CFATTACH_DECL_NEW(lcd_obio, sizeof (struct pxa2x0_lcd_softc),  lcd_match,
155     lcd_attach, NULL, NULL);
156 
157 int
158 lcd_match( device_t parent, cfdata_t cf, void *aux )
159 {
160 	return 1;
161 }
162 
163 static const struct lcd_panel_geometry sharp_LM8V31 =
164 {
165     640,			/* Width */
166     480,			/* Height */
167     0,				/* No extra lines */
168 
169     LCDPANEL_DUAL|LCDPANEL_PASSIVE|LCDPANEL_PCP,
170     10,				/* clock divider */
171     0xff,			/* AC bias pin freq */
172 
173     2,				/* horizontal sync pulse width */
174     3,				/* BLW */
175     3,				/* ELW */
176 
177     1,				/* vertical sync pulse width */
178     0,				/* BFW */
179     0,				/* EFW */
180 
181 };
182 
183 void lcd_attach( device_t parent, device_t self, void *aux )
184 {
185 	struct pxa2x0_lcd_softc *sc = device_private(self);
186 	struct obio_attach_args *oba = aux;
187 	struct pxaip_attach_args paa;
188 
189 	sc->dev = self;
190 
191 	paa.pxa_name = "obio";
192 	paa.pxa_iot = oba->oba_iot;
193 	paa.pxa_addr = oba->oba_addr;
194 	paa.pxa_size = 0;		/* XXX */
195 	paa.pxa_intr = oba->oba_intr;
196 
197 	pxa2x0_lcd_attach_sub(sc, &paa, &sharp_LM8V31);
198 
199 
200 #if NWSDISPLAY > 0
201 
202 	{
203 		struct wsemuldisplaydev_attach_args aa;
204 
205 		/* make wsdisplay screen list */
206 		pxa2x0_lcd_setup_wsscreen( &lcd_bpp16_screen, &sharp_LM8V31, NULL );
207 		pxa2x0_lcd_setup_wsscreen( &lcd_bpp8_screen, &sharp_LM8V31, NULL );
208 		pxa2x0_lcd_setup_wsscreen( &lcd_bpp4_screen, &sharp_LM8V31, NULL );
209 
210 		aa.console = 0;
211 		aa.scrdata = &lcd_screen_list;
212 		aa.accessops = &lcd_accessops;
213 		aa.accesscookie = sc;
214 
215 		(void) config_found(self, &aa, wsemuldisplaydevprint);
216 	}
217 #else
218 	{
219 		struct pxa2x0_lcd_screen *screen;
220 		int error;
221 
222 		error = pxa2x0_lcd_new_screen( sc, 8, &screen );
223 		if( error == 0 ){
224 			sc->active = screen;
225 			pxa2x0_lcd_start_dma( sc, screen );
226 		}
227 	}
228 #endif
229 
230 }
231 
232 #if NWSDISPLAY > 0
233 
234 int
235 lcd_ioctl(void *v, void *vs, u_long cmd, void *data, int flag, struct lwp *l)
236 {
237 	struct pxa2x0_lcd_softc *sc = v;
238 	struct obio_softc *osc = device_private(device_parent(sc->dev));
239 	uint16_t reg;
240 
241 	switch (cmd) {
242 	case WSDISPLAYIO_SVIDEO:
243 		reg = bus_space_read_2( osc->sc_iot, osc->sc_obioreg_ioh,
244 		    LUBBOCK_MISCWR );
245 		if( *(int *)data == WSDISPLAYIO_VIDEO_ON )
246 			reg |= MISCWR_LCDDISP;
247 		else
248 			reg &= ~MISCWR_LCDDISP;
249 		bus_space_write_2( osc->sc_iot, osc->sc_obioreg_ioh,
250 			LUBBOCK_MISCWR, reg );
251 		break;			/* turn on/off LCD controller */
252 	}
253 
254 	return pxa2x0_lcd_ioctl( v, vs, cmd, data, flag, l );
255 }
256 
257 int
258 lcd_show_screen(void *v, void *cookie, int waitok,
259     void (*cb)(void *, int, int), void *cbarg)
260 {
261 	struct pxa2x0_lcd_softc *sc = v;
262 	struct obio_softc *osc = device_private(device_parent(sc->dev));
263 
264 	pxa2x0_lcd_show_screen(v,cookie,waitok,cb,cbarg);
265 
266 	/* Turn on LCD */
267 	bus_space_write_4( osc->sc_iot, osc->sc_obioreg_ioh, LUBBOCK_MISCWR,
268 	    MISCWR_LCDDISP |
269 	    bus_space_read_4( osc->sc_iot, osc->sc_obioreg_ioh, LUBBOCK_MISCWR ) );
270 
271 	return (0);
272 }
273 
274 
275 
276 #else  /* NWSDISPLAY==0 */
277 
278 int
279 lcdopen( dev_t dev, int oflags, int devtype, struct lwp *l )
280 {
281 	return 0;
282 }
283 
284 int
285 lcdclose( dev_t dev, int fflag, int devtype, struct lwp *l )
286 {
287 	return 0;
288 }
289 
290 paddr_t
291 lcdmmap( dev_t dev, off_t offset, int size )
292 {
293 	struct pxa2x0_lcd_softc *sc =
294 		device_lookup_private(&lcd_cd, minor(dev));
295 	struct pxa2x0_lcd_screen *scr = sc->active;
296 
297 	return bus_dmamem_mmap( &pxa2x0_bus_dma_tag, scr->segs, scr->nsegs,
298 	    offset, 0, BUS_DMA_WAITOK|BUS_DMA_COHERENT );
299 }
300 
301 int
302 lcdioctl( dev_t dev, u_long cmd, void *data,
303 	    int fflag, struct lwp *l )
304 {
305 	return EOPNOTSUPP;
306 }
307 
308 #endif /* NWSDISPLAY>0 */
309