xref: /netbsd-src/sys/arch/evbarm/lubbock/lubbock_lcd.c (revision 9fb66d812c00ebfb445c0b47dea128f32aa6fe96)
1 /* $NetBSD: lubbock_lcd.c,v 1.15 2014/07/25 08:10:33 dholland Exp $ */
2 
3 /*
4  * Copyright (c) 2002, 2003  Genetec Corporation.  All rights reserved.
5  * Written by Hiroyuki Bessho for Genetec Corporation.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. The name of Genetec Corporation may not be used to endorse or
16  *    promote products derived from this software without specific prior
17  *    written permission.
18  *
19  * THIS SOFTWARE IS PROVIDED BY GENETEC CORPORATION ``AS IS'' AND
20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL GENETEC CORPORATION
23  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29  * POSSIBILITY OF SUCH DAMAGE.
30  */
31 
32 /*
33  * LCD driver for Intel Lubbock.
34  *
35  * Controlling LCD is almost completely done through PXA2X0's
36  * integrated LCD controller.  Codes for it is arm/xscale/pxa2x0_lcd.c.
37  *
38  * Codes in this file provide platform specific things including:
39  *   LCD on/off switch in on-board PLD register.
40  *   LCD panel geometry
41  */
42 #include <sys/cdefs.h>
43 __KERNEL_RCSID(0, "$NetBSD: lubbock_lcd.c,v 1.15 2014/07/25 08:10:33 dholland Exp $");
44 
45 #include <sys/param.h>
46 #include <sys/systm.h>
47 #include <sys/conf.h>
48 #include <sys/uio.h>
49 #include <sys/malloc.h>
50 
51 #include <dev/cons.h>
52 #include <dev/wscons/wsconsio.h>
53 #include <dev/wscons/wsdisplayvar.h>
54 #include <dev/wscons/wscons_callbacks.h>
55 
56 #include <sys/bus.h>
57 #include <arm/xscale/pxa2x0var.h>
58 #include <arm/xscale/pxa2x0reg.h>
59 #include <arm/xscale/pxa2x0_lcd.h>
60 
61 #include <arch/evbarm/lubbock/lubbock_reg.h>
62 #include <arch/evbarm/lubbock/lubbock_var.h>
63 
64 #include "wsdisplay.h"
65 
66 int	lcd_match(device_t, cfdata_t, void *);
67 void	lcd_attach(device_t, device_t, void *);
68 int	lcdintr(void *);
69 
70 #if NWSDISPLAY > 0
71 
72 /*
73  * wsdisplay glue
74  */
75 struct pxa2x0_wsscreen_descr lcd_bpp16_screen = {
76 	{
77 		"bpp16", 0, 0,
78 		&pxa2x0_lcd_emulops,
79 		0, 0,
80 		WSSCREEN_WSCOLORS,
81 	},
82 	16				/* bits per pixel */
83 }, lcd_bpp8_screen = {
84 	{
85 		"bpp8", 0, 0,
86 		&pxa2x0_lcd_emulops,
87 		0, 0,
88 		WSSCREEN_WSCOLORS,
89 	},
90 	8				/* bits per pixel */
91 }, lcd_bpp4_screen = {
92 	{
93 		"bpp4", 0, 0,
94 		&pxa2x0_lcd_emulops,
95 		0, 0,
96 		WSSCREEN_WSCOLORS,
97 	},
98 	4				/* bits per pixel */
99 };
100 
101 
102 static const struct wsscreen_descr *lcd_scr_descr[] = {
103 #if 0
104 	/* bpp4 needs a patch to rasops4 */
105 	&lcd_bpp4_screen.c,
106 #endif
107 	&lcd_bpp8_screen.c,
108 	&lcd_bpp16_screen.c,
109 };
110 
111 const struct wsscreen_list lcd_screen_list = {
112 	sizeof lcd_scr_descr / sizeof lcd_scr_descr[0],
113 	lcd_scr_descr
114 };
115 
116 int	lcd_ioctl(void *, void *, u_long, void *, int, struct lwp *);
117 
118 int	lcd_show_screen(void *, void *, int,
119 	    void (*)(void *, int, int), void *);
120 
121 const struct wsdisplay_accessops lcd_accessops = {
122 	lcd_ioctl,
123 	pxa2x0_lcd_mmap,
124 	pxa2x0_lcd_alloc_screen,
125 	pxa2x0_lcd_free_screen,
126 	lcd_show_screen,
127 	NULL, /* load_font */
128 };
129 
130 #else
131 /*
132  * Interface to LCD framebuffer without wscons
133  */
134 dev_type_open(lcdopen);
135 dev_type_close(lcdclose);
136 dev_type_ioctl(lcdioctl);
137 dev_type_mmap(lcdmmap);
138 const struct cdevsw lcd_cdevsw = {
139 	.d_open = lcdopen,
140 	.d_close = lcdclose,
141 	.d_read = noread,
142 	.d_write = nowrite,
143 	.d_ioctl = lcdioctl,
144 	.d_stop = nostop,
145 	.d_tty = notty,
146 	.d_poll = nopoll,
147 	.d_mmap = lcdmmap,
148 	.d_kqfilter = nokqfilter,
149 	.d_discard = nodiscard,
150 	.d_flag = D_TTY
151 };
152 
153 #endif
154 
155 CFATTACH_DECL_NEW(lcd_obio, sizeof (struct pxa2x0_lcd_softc),  lcd_match,
156     lcd_attach, NULL, NULL);
157 
158 int
159 lcd_match( device_t parent, cfdata_t cf, void *aux )
160 {
161 	return 1;
162 }
163 
164 static const struct lcd_panel_geometry sharp_LM8V31 =
165 {
166     640,			/* Width */
167     480,			/* Height */
168     0,				/* No extra lines */
169 
170     LCDPANEL_DUAL|LCDPANEL_PASSIVE|LCDPANEL_PCP,
171     10,				/* clock divider */
172     0xff,			/* AC bias pin freq */
173 
174     2,				/* horizontal sync pulse width */
175     3,				/* BLW */
176     3,				/* ELW */
177 
178     1,				/* vertical sync pulse width */
179     0,				/* BFW */
180     0,				/* EFW */
181 
182 };
183 
184 void lcd_attach( device_t parent, device_t self, void *aux )
185 {
186 	struct pxa2x0_lcd_softc *sc = device_private(self);
187 	struct obio_attach_args *oba = aux;
188 	struct pxaip_attach_args paa;
189 
190 	sc->dev = self;
191 
192 	paa.pxa_name = "obio";
193 	paa.pxa_iot = oba->oba_iot;
194 	paa.pxa_addr = oba->oba_addr;
195 	paa.pxa_size = 0;		/* XXX */
196 	paa.pxa_intr = oba->oba_intr;
197 
198 	pxa2x0_lcd_attach_sub(sc, &paa, &sharp_LM8V31);
199 
200 
201 #if NWSDISPLAY > 0
202 
203 	{
204 		struct wsemuldisplaydev_attach_args aa;
205 
206 		/* make wsdisplay screen list */
207 		pxa2x0_lcd_setup_wsscreen( &lcd_bpp16_screen, &sharp_LM8V31, NULL );
208 		pxa2x0_lcd_setup_wsscreen( &lcd_bpp8_screen, &sharp_LM8V31, NULL );
209 		pxa2x0_lcd_setup_wsscreen( &lcd_bpp4_screen, &sharp_LM8V31, NULL );
210 
211 		aa.console = 0;
212 		aa.scrdata = &lcd_screen_list;
213 		aa.accessops = &lcd_accessops;
214 		aa.accesscookie = sc;
215 
216 		(void) config_found(self, &aa, wsemuldisplaydevprint);
217 	}
218 #else
219 	{
220 		struct pxa2x0_lcd_screen *screen;
221 		int error;
222 
223 		error = pxa2x0_lcd_new_screen( sc, 8, &screen );
224 		if( error == 0 ){
225 			sc->active = screen;
226 			pxa2x0_lcd_start_dma( sc, screen );
227 		}
228 	}
229 #endif
230 
231 }
232 
233 #if NWSDISPLAY > 0
234 
235 int
236 lcd_ioctl(void *v, void *vs, u_long cmd, void *data, int flag, struct lwp *l)
237 {
238 	struct pxa2x0_lcd_softc *sc = v;
239 	struct obio_softc *osc = device_private(device_parent(sc->dev));
240 	uint16_t reg;
241 
242 	switch (cmd) {
243 	case WSDISPLAYIO_SVIDEO:
244 		reg = bus_space_read_2( osc->sc_iot, osc->sc_obioreg_ioh,
245 		    LUBBOCK_MISCWR );
246 		if( *(int *)data == WSDISPLAYIO_VIDEO_ON )
247 			reg |= MISCWR_LCDDISP;
248 		else
249 			reg &= ~MISCWR_LCDDISP;
250 		bus_space_write_2( osc->sc_iot, osc->sc_obioreg_ioh,
251 			LUBBOCK_MISCWR, reg );
252 		break;			/* turn on/off LCD controller */
253 	}
254 
255 	return pxa2x0_lcd_ioctl( v, vs, cmd, data, flag, l );
256 }
257 
258 int
259 lcd_show_screen(void *v, void *cookie, int waitok,
260     void (*cb)(void *, int, int), void *cbarg)
261 {
262 	struct pxa2x0_lcd_softc *sc = v;
263 	struct obio_softc *osc = device_private(device_parent(sc->dev));
264 
265 	pxa2x0_lcd_show_screen(v,cookie,waitok,cb,cbarg);
266 
267 	/* Turn on LCD */
268 	bus_space_write_4( osc->sc_iot, osc->sc_obioreg_ioh, LUBBOCK_MISCWR,
269 	    MISCWR_LCDDISP |
270 	    bus_space_read_4( osc->sc_iot, osc->sc_obioreg_ioh, LUBBOCK_MISCWR ) );
271 
272 	return (0);
273 }
274 
275 
276 
277 #else  /* NWSDISPLAY==0 */
278 
279 int
280 lcdopen( dev_t dev, int oflags, int devtype, struct lwp *l )
281 {
282 	return 0;
283 }
284 
285 int
286 lcdclose( dev_t dev, int fflag, int devtype, struct lwp *l )
287 {
288 	return 0;
289 }
290 
291 paddr_t
292 lcdmmap( dev_t dev, off_t offset, int size )
293 {
294 	struct pxa2x0_lcd_softc *sc =
295 		device_lookup_private(&lcd_cd, minor(dev));
296 	struct pxa2x0_lcd_screen *scr = sc->active;
297 
298 	return bus_dmamem_mmap( &pxa2x0_bus_dma_tag, scr->segs, scr->nsegs,
299 	    offset, 0, BUS_DMA_WAITOK|BUS_DMA_COHERENT );
300 }
301 
302 int
303 lcdioctl( dev_t dev, u_long cmd, void *data,
304 	    int fflag, struct lwp *l )
305 {
306 	return EOPNOTSUPP;
307 }
308 
309 #endif /* NWSDISPLAY>0 */
310