1 /* $NetBSD: plcomvar.h,v 1.16 2015/04/13 21:18:41 riastradh Exp $ */ 2 3 /* 4 * Copyright (c) 1996 Christopher G. Demetriou. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Christopher G. Demetriou 17 * for the NetBSD Project. 18 * 4. The name of the author may not be used to endorse or promote products 19 * derived from this software without specific prior written permission 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 #include "opt_multiprocessor.h" 34 #include "opt_lockdebug.h" 35 #include "opt_plcom.h" 36 #include "opt_kgdb.h" 37 38 #ifdef RND_COM 39 #include <sys/rndsource.h> 40 #endif 41 42 #include <sys/callout.h> 43 #include <sys/timepps.h> 44 45 struct plcom_instance; 46 47 int plcomcnattach (struct plcom_instance *, int, int, tcflag_t, int); 48 void plcomcndetach (void); 49 50 #ifdef KGDB 51 int plcom_kgdb_attach (struct plcom_instance *, int, int, tcflag_t, int); 52 #endif 53 54 int plcom_is_console (bus_space_tag_t, bus_addr_t, bus_space_handle_t *); 55 56 /* Hardware flag masks */ 57 #define PLCOM_HW_NOIEN 0x01 58 #define PLCOM_HW_FIFO 0x02 59 #define PLCOM_HW_HAYESP 0x04 60 #define PLCOM_HW_FLOW 0x08 61 #define PLCOM_HW_DEV_OK 0x20 62 #define PLCOM_HW_CONSOLE 0x40 63 #define PLCOM_HW_KGDB 0x80 64 #define PLCOM_HW_TXFIFO_DISABLE 0x100 65 66 /* Buffer size for character buffer */ 67 #define PLCOM_RING_SIZE 2048 68 69 struct plcom_instance { 70 u_int pi_type; 71 #define PLCOM_TYPE_PL010 0 72 #define PLCOM_TYPE_PL011 1 73 74 uint32_t pi_flags; /* flags for this PLCOM */ 75 #define PLC_FLAG_USE_DMA 0x0001 76 #define PLC_FLAG_32BIT_ACCESS 0x0002 77 78 void *pi_cookie; 79 80 bus_space_tag_t pi_iot; 81 bus_space_handle_t pi_ioh; 82 bus_addr_t pi_iobase; 83 bus_addr_t pi_size; 84 struct plcom_registers *pi_regs; 85 }; 86 87 struct plcomcons_info { 88 int rate; 89 int frequency; 90 int type; 91 92 tcflag_t cflag; 93 }; 94 95 struct plcom_softc { 96 device_t sc_dev; 97 98 struct tty *sc_tty; 99 void *sc_si; 100 101 struct callout sc_diag_callout; 102 103 int sc_frequency; 104 105 struct plcom_instance sc_pi; 106 107 u_int sc_overflows, 108 sc_floods, 109 sc_errors; 110 111 int sc_hwflags, 112 sc_swflags; 113 u_int sc_fifolen; 114 115 u_int sc_r_hiwat, 116 sc_r_lowat; 117 u_char *volatile sc_rbget, 118 *volatile sc_rbput; 119 volatile u_int sc_rbavail; 120 u_char *sc_rbuf, 121 *sc_ebuf; 122 123 u_char *sc_tba; 124 u_int sc_tbc, 125 sc_heldtbc; 126 127 volatile u_char sc_rx_flags, 128 #define RX_TTY_BLOCKED 0x01 129 #define RX_TTY_OVERFLOWED 0x02 130 #define RX_IBUF_BLOCKED 0x04 131 #define RX_IBUF_OVERFLOWED 0x08 132 #define RX_ANY_BLOCK 0x0f 133 sc_tx_busy, 134 sc_tx_done, 135 sc_tx_stopped, 136 sc_st_check, 137 sc_rx_ready; 138 139 volatile u_char sc_heldchange; 140 volatile u_int sc_cr, sc_ratel, sc_rateh, sc_imsc; 141 volatile u_int sc_msr, sc_msr_delta, sc_msr_mask; 142 volatile u_char sc_mcr, sc_mcr_active, sc_lcr; 143 u_char sc_mcr_dtr, sc_mcr_rts, sc_msr_cts, sc_msr_dcd; 144 u_int sc_fifo; 145 146 /* Support routine to program mcr lines for PL010, if present. */ 147 void (*sc_set_mcr)(void *, int, u_int); 148 void *sc_set_mcr_arg; 149 150 /* power management hooks */ 151 int (*enable) (struct plcom_softc *); 152 void (*disable) (struct plcom_softc *); 153 int enabled; 154 155 /* PPS signal on DCD, with or without inkernel clock disciplining */ 156 u_char sc_ppsmask; /* pps signal mask */ 157 u_char sc_ppsassert; /* pps leading edge */ 158 u_char sc_ppsclear; /* pps trailing edge */ 159 pps_info_t ppsinfo; 160 pps_params_t ppsparam; 161 162 #ifdef RND_COM 163 krndsource_t rnd_source; 164 #endif 165 kmutex_t sc_lock; 166 }; 167 168 #if 0 169 int plcomprobe1 (bus_space_tag_t, bus_space_handle_t); 170 #endif 171 int plcomintr (void *); 172 void plcom_attach_subr (struct plcom_softc *); 173 int plcom_detach (device_t, int); 174 int plcom_activate (device_t, enum devact); 175 176