1 /* $NetBSD: vmparam.h,v 1.3 2001/11/15 18:06:13 soren Exp $ */ 2 3 /* 4 * Copyright (c) 1988 University of Utah. 5 * Copyright (c) 1982, 1986, 1990, 1993 6 * The Regents of the University of California. All rights reserved. 7 * 8 * This code is derived from software contributed to Berkeley by 9 * the Systems Programming Group of the University of Utah Computer 10 * Science Department. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 3. All advertising materials mentioning features or use of this software 21 * must display the following acknowledgement: 22 * This product includes software developed by the University of 23 * California, Berkeley and its contributors. 24 * 4. Neither the name of the University nor the names of its contributors 25 * may be used to endorse or promote products derived from this software 26 * without specific prior written permission. 27 * 28 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 29 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 30 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 31 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 32 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 36 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 37 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 38 * SUCH DAMAGE. 39 * 40 * from: Utah $Hdr: vmparam.h 1.16 91/01/18$ 41 * 42 * @(#)vmparam.h 8.2 (Berkeley) 4/19/94 43 */ 44 45 #ifndef _MACHINE_VMPARAM_H_ 46 #define _MACHINE_VMPARAM_H_ 47 48 /* 49 * Machine dependent constants for cesfic 50 */ 51 52 /* 53 * We use 4K pages on the cesfic. Override the PAGE_* definitions 54 * to be compile-time constants. 55 */ 56 #define PAGE_SHIFT 12 57 #define PAGE_SIZE (1 << PAGE_SHIFT) 58 #define PAGE_MASK (PAGE_SIZE - 1) 59 60 /* 61 * USRTEXT is the start of the user text/data space, while USRSTACK 62 * is the top (end) of the user stack. LOWPAGES and HIGHPAGES are 63 * the number of pages from the beginning of the P0 region to the 64 * beginning of the text and from the beginning of the P1 region to the 65 * beginning of the stack respectively. 66 * 67 * NOTE: the ONLY reason that HIGHPAGES is 0x100 instead of UPAGES (3) 68 * is for HPUX compatibility. Why?? Because HPUX's debuggers 69 * have the user's stack hard-wired at FFF00000 for post-mortems, 70 * and we must be compatible... 71 */ 72 #define USRTEXT 8192 /* Must equal __LDPGSZ */ 73 #define USRSTACK (-HIGHPAGES*NBPG) /* Start of user stack */ 74 #define BTOPUSRSTACK (0x100000-HIGHPAGES) /* btop(USRSTACK) */ 75 #define P1PAGES 0x100000 76 #define LOWPAGES 0 77 #define HIGHPAGES (0x100000/NBPG) 78 79 /* 80 * Virtual memory related constants, all in bytes 81 */ 82 #ifndef MAXTSIZ 83 #define MAXTSIZ (8*1024*1024) /* max text size */ 84 #endif 85 #ifndef DFLDSIZ 86 #define DFLDSIZ (32*1024*1024) /* initial data size limit */ 87 #endif 88 #ifndef MAXDSIZ 89 #define MAXDSIZ (64*1024*1024) /* max data size */ 90 #endif 91 #ifndef DFLSSIZ 92 #define DFLSSIZ (512*1024) /* initial stack size limit */ 93 #endif 94 #ifndef MAXSSIZ 95 #define MAXSSIZ MAXDSIZ /* max stack size */ 96 #endif 97 98 /* 99 * Default sizes of swap allocation chunks (see dmap.h). 100 * The actual values may be changed in vminit() based on MAXDSIZ. 101 * With MAXDSIZ of 16Mb and NDMAP of 38, dmmax will be 1024. 102 * DMMIN should be at least ctod(1) so that vtod() works. 103 * vminit() insures this. 104 */ 105 #define DMMIN 32 /* smallest swap allocation */ 106 #define DMMAX 4096 /* largest potential swap allocation */ 107 108 /* 109 * Sizes of the system and user portions of the system page table. 110 */ 111 /* SYSPTSIZE IS SILLY; IT SHOULD BE COMPUTED AT BOOT TIME */ 112 #define SYSPTSIZE (2 * NPTEPG) /* 8mb */ 113 #define USRPTSIZE (1 * NPTEPG) /* 4mb */ 114 115 /* 116 * PTEs for mapping user space into the kernel for phyio operations. 117 * One page is enough to handle 4Mb of simultaneous raw IO operations. 118 */ 119 #ifndef USRIOSIZE 120 #define USRIOSIZE (1 * NPTEPG) /* 4mb */ 121 #endif 122 123 /* 124 * PTEs for system V style shared memory. 125 * This is basically slop for kmempt which we actually allocate (malloc) from. 126 */ 127 #ifndef SHMMAXPGS 128 #define SHMMAXPGS 1024 /* 4mb */ 129 #endif 130 131 /* 132 * Boundary at which to place first MAPMEM segment if not explicitly 133 * specified. Should be a power of two. This allows some slop for 134 * the data segment to grow underneath the first mapped segment. 135 */ 136 #define MMSEG 0x200000 137 138 /* 139 * The size of the clock loop. 140 */ 141 #define LOOPPAGES (maxfree - firstfree) 142 143 /* 144 * A swapped in process is given a small amount of core without being bothered 145 * by the page replacement algorithm. Basically this says that if you are 146 * swapped in you deserve some resources. We protect the last SAFERSS 147 * pages against paging and will just swap you out rather than paging you. 148 * Note that each process has at least UPAGES+CLSIZE pages which are not 149 * paged anyways (this is currently 8+2=10 pages or 5k bytes), so this 150 * number just means a swapped in process is given around 25k bytes. 151 * Just for fun: current memory prices are 4600$ a megabyte on VAX (4/22/81), 152 * so we loan each swapped in process memory worth 100$, or just admit 153 * that we don't consider it worthwhile and swap it out to disk which costs 154 * $30/mb or about $0.75. 155 */ 156 #define SAFERSS 4 /* nominal ``small'' resident set size 157 protected against replacement */ 158 159 /* 160 * DISKRPM is used to estimate the number of paging i/o operations 161 * which one can expect from a single disk controller. 162 */ 163 #define DISKRPM 60 164 165 /* 166 * Klustering constants. Klustering is the gathering 167 * of pages together for pagein/pageout, while clustering 168 * is the treatment of hardware page size as though it were 169 * larger than it really is. 170 * 171 * KLMAX gives maximum cluster size in CLSIZE page (cluster-page) 172 * units. Note that ctod(KLMAX*CLSIZE) must be <= DMMIN in dmap.h. 173 * ctob(KLMAX) should also be less than MAXPHYS (in vm_swp.c) 174 * unless you like "big push" panics. 175 */ 176 177 #define KLMAX (4/CLSIZE) 178 #define KLSEQL (2/CLSIZE) /* in klust if vadvise(VA_SEQL) */ 179 #define KLIN (4/CLSIZE) /* default data/stack in klust */ 180 #define KLTXT (4/CLSIZE) /* default text in klust */ 181 #define KLOUT (4/CLSIZE) 182 183 /* 184 * KLSDIST is the advance or retard of the fifo reclaim for sequential 185 * processes data space. 186 */ 187 #define KLSDIST 3 /* klusters advance/retard for seq. fifo */ 188 189 /* 190 * Paging thresholds (see vm_sched.c). 191 * Strategy of 1/19/85: 192 * lotsfree is 512k bytes, but at most 1/4 of memory 193 * desfree is 200k bytes, but at most 1/8 of memory 194 */ 195 #define LOTSFREE (512 * 1024) 196 #define LOTSFREEFRACT 4 197 #define DESFREE (200 * 1024) 198 #define DESFREEFRACT 8 199 200 /* 201 * There are two clock hands, initially separated by HANDSPREAD bytes 202 * (but at most all of user memory). The amount of time to reclaim 203 * a page once the pageout process examines it increases with this 204 * distance and decreases as the scan rate rises. 205 */ 206 #define HANDSPREAD (2 * 1024 * 1024) 207 208 /* 209 * The number of times per second to recompute the desired paging rate 210 * and poke the pagedaemon. 211 */ 212 #define RATETOSCHEDPAGING 4 213 214 /* 215 * Believed threshold (in megabytes) for which interleaved 216 * swapping area is desirable. 217 */ 218 #define LOTSOFMEM 2 219 220 /* 221 * Mach derived constants 222 */ 223 224 /* user/kernel map constants */ 225 #define VM_MIN_ADDRESS ((vaddr_t)0) 226 #define VM_MAXUSER_ADDRESS ((vaddr_t)0xFFF00000) 227 #define VM_MAX_ADDRESS ((vaddr_t)0xFFF00000) 228 #define VM_MIN_KERNEL_ADDRESS ((vaddr_t)0x00002000) 229 #define VM_MAX_KERNEL_ADDRESS ((vaddr_t)0xFFFFF000) 230 231 /* virtual sizes (bytes) for various kernel submaps */ 232 #define VM_PHYS_SIZE (USRIOSIZE*NBPG) 233 234 /* # of kernel PT pages (initial only, can grow dynamically) */ 235 #define VM_KERNEL_PT_PAGES ((vsize_t)2) /* XXX: SYSPTSIZE */ 236 237 /* pcb base */ 238 #define pcbb(p) ((u_int)(p)->p_addr) 239 240 /* Use new VM page bootstrap interface. */ 241 #define MACHINE_NEW_NONCONTIG 242 243 /* 244 * Constants which control the way the VM system deals with memory segments. 245 * The cesfic only has one usable physical memory segment. 246 */ 247 #define VM_PHYSSEG_MAX 1 248 #define VM_PHYSSEG_STRAT VM_PSTRAT_BSEARCH 249 #define VM_PHYSSEG_NOADD 250 251 #define VM_NFREELIST 1 252 #define VM_FREELIST_DEFAULT 0 253 254 #define __HAVE_PMAP_PHYSSEG 255 256 /* 257 * pmap-specific data stored in the vm_physmem[] array. 258 */ 259 struct pmap_physseg { 260 struct pv_entry *pvent; /* pv table for this seg */ 261 char *attrs; /* page attributes for this seg */ 262 }; 263 264 #endif /* _MACHINE_VMPARAM_H_ */ 265