1 /* $NetBSD: sa1111_kbc.c,v 1.12 2010/03/13 11:13:31 bsh Exp $ */ 2 3 /* 4 * Copyright (c) 2004 Ben Harris. 5 * Copyright (c) 2002, 2004 Genetec Corporation. All rights reserved. 6 * Written by Hiroyuki Bessho for Genetec Corporation. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. The name of Genetec Corporation may not be used to endorse or 17 * promote products derived from this software without specific prior 18 * written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY GENETEC CORPORATION ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL GENETEC CORPORATION 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 * 32 * Driver for keyboard controller in SA-1111 companion chip. 33 */ 34 /* 35 * Copyright (c) 1998 36 * Matthias Drochner. All rights reserved. 37 * 38 * Redistribution and use in source and binary forms, with or without 39 * modification, are permitted provided that the following conditions 40 * are met: 41 * 1. Redistributions of source code must retain the above copyright 42 * notice, this list of conditions and the following disclaimer. 43 * 2. Redistributions in binary form must reproduce the above copyright 44 * notice, this list of conditions and the following disclaimer in the 45 * documentation and/or other materials provided with the distribution. 46 * 47 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 48 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 49 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 50 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 51 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 52 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 53 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 54 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 55 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 56 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 57 */ 58 59 #include <sys/cdefs.h> 60 __KERNEL_RCSID(0, "$NetBSD: sa1111_kbc.c,v 1.12 2010/03/13 11:13:31 bsh Exp $"); 61 62 #include <sys/param.h> 63 #include <sys/systm.h> 64 #include <sys/types.h> 65 #include <sys/callout.h> 66 #include <sys/kernel.h> 67 #include <sys/proc.h> 68 #include <sys/conf.h> 69 #include <sys/device.h> 70 #include <sys/malloc.h> 71 #include <sys/errno.h> 72 #include <sys/queue.h> 73 #include <sys/bus.h> 74 75 #include <arm/sa11x0/sa1111_reg.h> 76 #include <arm/sa11x0/sa1111_var.h> 77 78 #include <dev/pckbport/pckbportvar.h> /* for prototypes */ 79 80 #include "pckbd.h" 81 #include "rnd.h" 82 #include "locators.h" 83 84 struct sackbc_softc { 85 device_t dev; 86 87 bus_space_tag_t iot; 88 bus_space_handle_t ioh; 89 90 void *ih_rx; /* receive interrupt */ 91 int intr; /* interrupt number */ 92 int slot; /* KBD_SLOT or AUX_SLOT */ 93 94 int polling; /* don't process data in interrupt handler */ 95 int poll_stat; /* data read from inr handler if polling */ 96 int poll_data; /* status read from intr handler if polling */ 97 98 #if NRND > 0 99 rndsource_element_t rnd_source; 100 #endif 101 pckbport_tag_t pt; 102 }; 103 104 static int sackbc_match(device_t, cfdata_t, void *); 105 static void sackbc_attach(device_t, device_t, void *); 106 107 static int sackbc_xt_translation(void *, pckbport_slot_t, int); 108 #define sackbc_send_devcmd sackbc_send_cmd 109 static int sackbc_send_devcmd(void *, pckbport_slot_t, u_char); 110 static int sackbc_poll_data1(void *, pckbport_slot_t); 111 static void sackbc_slot_enable(void *, pckbport_slot_t, int); 112 static void sackbc_intr_establish(void *, pckbport_slot_t); 113 static void sackbc_set_poll(void *, pckbport_slot_t, int); 114 115 CFATTACH_DECL_NEW(sackbc, sizeof(struct sackbc_softc), sackbc_match, 116 sackbc_attach, NULL, NULL); 117 118 static struct pckbport_accessops const sackbc_ops = { 119 sackbc_xt_translation, 120 sackbc_send_devcmd, 121 sackbc_poll_data1, 122 sackbc_slot_enable, 123 sackbc_intr_establish, 124 sackbc_set_poll 125 }; 126 127 #define KBD_DELAY DELAY(8) 128 129 /*#define SACKBCDEBUG*/ 130 131 #ifdef SACKBCDEBUG 132 #define DPRINTF(arg) printf arg 133 #else 134 #define DPRINTF(arg) 135 #endif 136 137 138 static int 139 sackbc_match(device_t parent, cfdata_t cf, void *aux) 140 { 141 struct sa1111_attach_args *aa = (struct sa1111_attach_args *)aux; 142 143 switch (aa->sa_addr) { 144 case SACC_KBD0: 145 case SACC_KBD1: 146 return 1; 147 } 148 return 0; 149 } 150 151 #if 0 152 static int 153 sackbc_txint(void *cookie) 154 { 155 struct sackbc_softc *sc = cookie; 156 157 bus_space_read_4(sc->iot, sc->ioh, SACCKBD_STAT); 158 159 return 0; 160 } 161 #endif 162 163 static int 164 sackbc_rxint(void *cookie) 165 { 166 struct sackbc_softc *sc = cookie; 167 int stat, code = -1; 168 169 stat = bus_space_read_4(sc->iot, sc->ioh, SACCKBD_STAT); 170 DPRINTF(("sackbc_rxint stat=%x\n", stat)); 171 if (stat & KBDSTAT_RXF) { 172 code = bus_space_read_4(sc->iot, sc->ioh, SACCKBD_DATA); 173 174 #if NRND > 0 175 rnd_add_uint32(&sc->rnd_source, (stat<<8)|data); 176 #endif 177 178 if (sc->polling) { 179 sc->poll_data = code; 180 sc->poll_stat = stat; 181 } else 182 pckbportintr(sc->pt, sc->slot, code); 183 return 1; 184 } 185 186 return 0; 187 } 188 189 static void 190 sackbc_intr_establish(void *cookie, pckbport_slot_t slot) 191 { 192 struct sackbc_softc *sc = cookie; 193 194 if (!(sc->polling) && sc->ih_rx == NULL) { 195 sc->ih_rx = sacc_intr_establish( 196 (sacc_chipset_tag_t *) 197 device_private(device_parent(sc->dev)), 198 sc->intr+1, IST_EDGE_RAISE, IPL_TTY, sackbc_rxint, sc); 199 if (sc->ih_rx == NULL) { 200 aprint_normal_dev(sc->dev, "can't establish interrupt\n"); 201 } 202 } 203 } 204 205 static void 206 sackbc_disable_intrhandler(struct sackbc_softc *sc) 207 { 208 if (sc->polling && sc->ih_rx) { 209 sacc_intr_disestablish( 210 (sacc_chipset_tag_t *) 211 device_private(device_parent(sc->dev)), 212 sc->ih_rx); 213 sc->ih_rx = NULL; 214 } 215 } 216 217 static void 218 sackbc_attach(device_t parent, device_t self, void *aux) 219 { 220 struct sackbc_softc *sc = device_private(self); 221 struct sacc_softc *psc = device_private(parent); 222 struct sa1111_attach_args *aa = (struct sa1111_attach_args *)aux; 223 device_t child; 224 uint32_t tmp, clock_bit; 225 int intr, slot; 226 227 switch (aa->sa_addr) { 228 case SACC_KBD0: clock_bit = (1<<6); intr = 21; break; 229 case SACC_KBD1: clock_bit = (1<<5); intr = 18; break; 230 default: 231 return; 232 } 233 234 if (aa->sa_size <= 0) 235 aa->sa_size = SACCKBD_SIZE; 236 if (aa->sa_intr == SACCCF_INTR_DEFAULT) 237 aa->sa_intr = intr; 238 239 sc->dev = self; 240 sc->iot = psc->sc_iot; 241 if (bus_space_subregion(psc->sc_iot, psc->sc_ioh, 242 aa->sa_addr, aa->sa_size, &sc->ioh)) { 243 aprint_normal(": can't map subregion\n"); 244 return; 245 } 246 247 /* enable clock for PS/2 kbd or mouse */ 248 tmp = bus_space_read_4(psc->sc_iot, psc->sc_ioh, SACCSC_SKPCR); 249 bus_space_write_4(psc->sc_iot, psc->sc_ioh, SACCSC_SKPCR, 250 tmp | clock_bit); 251 252 sc->ih_rx = NULL; 253 sc->intr = aa->sa_intr; 254 sc->polling = 0; 255 256 tmp = bus_space_read_4(sc->iot, sc->ioh, SACCKBD_CR); 257 bus_space_write_4(sc->iot, sc->ioh, SACCKBD_CR, tmp | KBDCR_ENA); 258 259 /* XXX: this is necessary to get keyboard working. but I don't know why */ 260 bus_space_write_4(sc->iot, sc->ioh, SACCKBD_CLKDIV, 2); 261 262 tmp = bus_space_read_4(sc->iot, sc->ioh, SACCKBD_STAT); 263 if ((tmp & KBDSTAT_ENA) == 0) { 264 printf("??? can't enable KBD controller\n"); 265 return; 266 } 267 268 printf("\n"); 269 270 sc->pt = pckbport_attach(sc, &sackbc_ops); 271 272 /* 273 * Although there is no such thing as SLOT for SA-1111 kbd 274 * controller, pckbd and pms drivers require it. 275 */ 276 for (slot = PCKBPORT_KBD_SLOT; slot <= PCKBPORT_AUX_SLOT; ++slot) { 277 child = pckbport_attach_slot(self, sc->pt, slot); 278 279 if (child == NULL) 280 continue; 281 sc->slot = slot; 282 #if NRND > 0 283 rnd_attach_source(&sc->rnd_source, device_xname(child), 284 RND_TYPE_TTY, 0); 285 #endif 286 /* only one of KBD_SLOT or AUX_SLOT is used. */ 287 break; 288 } 289 } 290 291 292 static inline int 293 sackbc_wait_output(struct sackbc_softc *sc) 294 { 295 u_int i, stat; 296 297 for (i = 100000; i; i--){ 298 stat = bus_space_read_4(sc->iot, sc->ioh, SACCKBD_STAT); 299 delay(100); 300 if (stat & KBDSTAT_TXE) 301 return 1; 302 } 303 return 0; 304 } 305 306 static int 307 sackbc_poll_data1(void *cookie, pckbport_slot_t slot) 308 { 309 struct sackbc_softc *sc = cookie; 310 int i, s, stat, c = -1; 311 312 s = spltty(); 313 314 if (sc->polling){ 315 stat = sc->poll_stat; 316 c = sc->poll_data; 317 sc->poll_data = -1; 318 sc->poll_stat = -1; 319 if (stat >= 0 && 320 (stat & (KBDSTAT_RXF|KBDSTAT_STP)) == KBDSTAT_RXF) { 321 splx(s); 322 return c; 323 } 324 } 325 326 /* if 1 port read takes 1us (?), this polls for 100ms */ 327 for (i = 100000; i; i--) { 328 stat = bus_space_read_4(sc->iot, sc->ioh, SACCKBD_STAT); 329 if ((stat & (KBDSTAT_RXF|KBDSTAT_STP)) == KBDSTAT_RXF) { 330 KBD_DELAY; 331 c = bus_space_read_4(sc->iot, sc->ioh, SACCKBD_DATA); 332 break; 333 } 334 } 335 336 splx(s); 337 return c; 338 } 339 340 static int 341 sackbc_send_cmd(void *cookie, pckbport_slot_t slot, u_char val) 342 { 343 struct sackbc_softc *sc = cookie; 344 345 if (!sackbc_wait_output(sc)) 346 return 0; 347 bus_space_write_1(sc->iot, sc->ioh, SACCKBD_DATA, val); 348 return 1; 349 } 350 351 352 /* 353 * Glue functions for pckbd on sackbc. 354 * These functions emulate those in dev/ic/pckbc.c. 355 * 356 */ 357 358 /* 359 * switch scancode translation on / off 360 * return nonzero on success 361 */ 362 static int 363 sackbc_xt_translation(void *self, pckbport_slot_t slot, int on) 364 { 365 /* KBD/Mouse controller doesn't have scancode translation */ 366 return !on; 367 } 368 369 static void 370 sackbc_slot_enable(void *self, pckbport_slot_t slot, int on) 371 { 372 #if 0 373 struct sackbc_softc *sc = (struct sackbc_softc *) self; 374 int cmd; 375 376 cmd = on ? KBC_KBDENABLE : KBC_KBDDISABLE; 377 if (!sackbc_send_cmd(sc, cmd)) 378 printf("sackbc_slot_enable(%d) failed\n", on); 379 #endif 380 } 381 382 383 static void 384 sackbc_set_poll(void *self, pckbport_slot_t slot, int on) 385 { 386 struct sackbc_softc *sc = (struct sackbc_softc *)self; 387 int s; 388 389 s = spltty(); 390 391 if (sc->polling != on) { 392 393 sc->polling = on; 394 395 if (on) { 396 sc->poll_data = sc->poll_stat = -1; 397 sackbc_disable_intrhandler(sc); 398 } else { 399 /* 400 * If disabling polling on a device that's 401 * been configured, make sure there are no 402 * bytes left in the FIFO, holding up the 403 * interrupt line. Otherwise we won't get any 404 * further interrupts. 405 */ 406 sackbc_rxint(sc); 407 sackbc_intr_establish(sc, sc->slot); 408 } 409 } 410 splx(s); 411 } 412