xref: /netbsd-src/sys/arch/arm/imx/imx51reg.h (revision bdc22b2e01993381dcefeff2bc9b56ca75a4235c)
1 /* $NetBSD: imx51reg.h,v 1.7 2015/05/07 04:37:29 hkenken Exp $ */
2 /*-
3  * Copyright (c) 2007 The NetBSD Foundation, Inc.
4  * All rights reserved.
5  *
6  * This code is derived from software contributed to The NetBSD Foundation
7  * by Matt Thomas.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice, this list of conditions and the following disclaimer.
14  * 2. Redistributions in binary form must reproduce the above copyright
15  *    notice, this list of conditions and the following disclaimer in the
16  *    documentation and/or other materials provided with the distribution.
17  *
18  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
19  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
20  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
21  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
22  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28  * POSSIBILITY OF SUCH DAMAGE.
29  */
30 
31 #ifndef _ARM_IMX_IMX51REG_H_
32 #define	_ARM_IMX_IMX51REG_H_
33 
34 #ifdef IMX50
35 #define	TZIC_BASE	0x0fffc000
36 #define	APB_BASE	0x40000000
37 #define	AIPSTZ1_BASE	0x50000000
38 #define	AIPSTZ2_BASE	0x60000000
39 #define	CSD0DDR_BASE	0x70000000
40 #else
41 #define	TZIC_BASE	0xe0000000
42 #define	AIPSTZ1_BASE	0x70000000
43 #define	AIPSTZ2_BASE	0x80000000
44 #define	CSD0DDR_BASE	0x90000000
45 #define	CSD1DDR_BASE	0xa0000000
46 #define	CSDDDR_SIZE	0x10000000	/* 256MiB */
47 #define	CS0_BASE	0xb0000000
48 #define	CS0_SIZE	0x08000000	/* 128MiB */
49 #define	CS1_BASE	0xb8000000
50 #define	CS1_SIZE	0x08000000	/* 128MiB */
51 #define	CS2_BASE	0xc0000000
52 #define	CS2_SIZE	0x08000000	/* 128MiB */
53 #define	CS3_BASE	0xc8000000
54 #define	CS3_SIZE	0x04000000	/* 64MiB */
55 #define	CS4_BASE	0xcc000000
56 #define	CS4_SIZE	0x02000000	/* 32MiB */
57 #define	CS5_BASE	0xcefe0000
58 #define	CS5_SIZE	0x00010000	/* 32MiB */
59 #define	NAND_FLASH_BASE	0xcfff0000	/* internal buffer */
60 #define	NAND_FLASH_SIZE	0x00010000
61 
62 #define	GPU2D_BASE	0xd0000000
63 #define	GPU2D_SIZE	0x10000000
64 #endif
65 
66 #define	BOOTROM_BASE	0x00000000
67 #define	BOOTROM_SIZE	0x9000
68 
69 #define	SCCRAM_BASE	0x1ffe0000
70 #define	SCCRAM_SIZE	0x20000
71 
72 #define	GPUMEM_BASE	0x20000000
73 #define	GPUMEM_SIZE	0x20000
74 
75 #define	GPU_BASE	0x30000000
76 #define	GPU_SIZE	0x10000000
77 
78 #ifdef IMX50
79 #define EPDC_BASE	(APB_BASE + 0x01010000)
80 #define EPDC_SIZE	0x2000
81 #endif
82 
83 /* Image Prossasing Unit */
84 #define	IPU_BASE	0x40000000
85 #define	IPU_CM_BASE	(IPU_BASE + 0x1e000000)
86 #define	IPU_CM_SIZE	0x8000
87 #define	IPU_IDMAC_BASE	(IPU_BASE + 0x1e008000)
88 #define	IPU_IDMAC_SIZE	0x8000
89 #define	IPU_DP_BASE	(IPU_BASE + 0x1e018000)
90 #define	IPU_DP_SIZE	0x8000
91 #define	IPU_IC_BASE	(IPU_BASE + 0x1e020000)
92 #define	IPU_IC_SIZE	0x8000
93 #define	IPU_IRT_BASE	(IPU_BASE + 0x1e028000)
94 #define	IPU_IRT_SIZE	0x8000
95 #define	IPU_CSI0_BASE	(IPU_BASE + 0x1e030000)
96 #define	IPU_CSI0_SIZE	0x8000
97 #define	IPU_CSI1_BASE	(IPU_BASE + 0x1e038000)
98 #define	IPU_CSI1_SIZE	0x8000
99 #define	IPU_DI0_BASE	(IPU_BASE + 0x1e040000)
100 #define	IPU_DI0_SIZE	0x8000
101 #define	IPU_DI1_BASE	(IPU_BASE + 0x1e048000)
102 #define	IPU_DI1_SIZE	0x8000
103 #define	IPU_SMFC_BASE	(IPU_BASE + 0x1e050000)
104 #define	IPU_SMFC_SIZE	0x8000
105 #define	IPU_DC_BASE	(IPU_BASE + 0x1e058000)
106 #define	IPU_DC_SIZE	0x8000
107 #define	IPU_DMFC_BASE	(IPU_BASE + 0x1e060000)
108 #define	IPU_DMFC_SIZE	0x8000
109 #define	IPU_VDI_BASE	(IPU_BASE + 0x1e068000)
110 #define	IPU_VDI_SIZE	0x8000
111 #define	IPU_CPMEM_BASE	(IPU_BASE + 0x1f000000)
112 #define	IPU_CPMEM_SIZE	0x20000
113 #define	IPU_LUT_BASE	(IPU_BASE + 0x1f020000)
114 #define	IPU_LUT_SIZE	0x20000
115 #define	IPU_SRM_BASE	(IPU_BASE + 0x1f040000)
116 #define	IPU_SRM_SIZE	0x20000
117 #define	IPU_TPM_BASE	(IPU_BASE + 0x1f060000)
118 #define	IPU_TPM_SIZE	0x20000
119 #define	IPU_DCTMPL_BASE	(IPU_BASE + 0x1f080000)
120 #define	IPU_DCTMPL_SIZE	0x20000
121 
122 #define	DEBUGROM_BASE	0x60000000
123 #define	DEBUGROM_SIZE	0x1000
124 
125 #define	ESDHC1_BASE	(AIPSTZ1_BASE + 0x00004000)
126 #define	ESDHC2_BASE	(AIPSTZ1_BASE + 0x00008000)
127 #define	ESDHC3_BASE	(AIPSTZ1_BASE + 0x00020000)
128 #define	ESDHC4_BASE	(AIPSTZ1_BASE + 0x00024000)
129 #define	ESDHC_SIZE	0x4000
130 
131 #define PWM1_BASE	(AIPSTZ1_BASE + 0x03fb4000)
132 #define PWM2_BASE	(AIPSTZ1_BASE + 0x03fb8000)
133 
134 #define	UART1_BASE	(AIPSTZ1_BASE + 0x03fbc000)
135 #define	UART2_BASE	(AIPSTZ1_BASE + 0x03fc0000)
136 #define	UART3_BASE	(AIPSTZ1_BASE + 0x0000c000)
137 /* register definitions in imxuartreg.h */
138 
139 #define	CCMC_BASE	(AIPSTZ1_BASE + 0x03fd4000)
140 
141 #define	ECSPI1_BASE	(AIPSTZ1_BASE + 0x00010000)
142 #define	ECSPI2_BASE	(AIPSTZ2_BASE + 0x03fac000)
143 #define	ECSPI_SIZE	0x4000
144 
145 #define	SSI1_BASE	(AIPSTZ2_BASE + 0x03fcc000)
146 #define	SSI2_BASE	(AIPSTZ1_BASE + 0x00014000)
147 #define	SSI3_BASE	(AIPSTZ2_BASE + 0x03fe8000)
148 /* register definitions in imxssireg.h */
149 
150 #define	SPDIF_BASE	(AIPSTZ1_BASE + 0x00028000)
151 #define	SPDIF_SIZE	0x4000
152 
153 #define	PATA_UDMA_BASE	(AIPSTZ1_BASE + 0x00030000)
154 #define	PATA_UDMA_SIZE	0x4000
155 #define	PATA_PIO_BASE	(AIPSTZ2_BASE + 0x03fe0000)
156 #define	PATA_PIO_SIZE	0x4000
157 
158 #define	SLM_BASE	(AIPSTZ1_BASE + 0x00034000)
159 #define	SLM_SIZE	0x4000
160 
161 #ifdef IMX50
162 #define	I2C3_BASE	(AIPSTZ1_BASE + 0x00038000)
163 #define	I2C3_SIZE	0x4000
164 #else
165 #define	HSI2C_BASE	(AIPSTZ1_BASE + 0x00038000)
166 #define	HSI2C_SIZE	0x4000
167 #endif
168 
169 #define	SPBA_BASE	(AIPSTZ1_BASE + 0x0003c000)
170 #define	SPBA_SIZE	0x4000
171 
172 #define	USBOH3_BASE	(AIPSTZ1_BASE + 0x03f80000)
173 #define	USBOH3_PL301_BASE	(AIPSTZ1_BASE + 0x03fc4000)
174 #define	USBOH3_EHCI_SIZE	0x200
175 #define	USBOH3_OTG	0x000
176 #define	USBOH3_EHCI(n)	(USBOH3_EHCI_SIZE*(n))	/* n=1,2,3 */
177 
178 /* USB_CTRL register */
179 #define	USBOH3_USBCTRL			0x800
180 #define	 USBCTRL_OWIR			__BIT(31)	/* OTG Wakeup interrupt request */
181 #define	 USBCTRL_OSIC			__BITS(29,30)	/* OTG Serial interface configuration */
182 #define	 USBCTRL_OUIE			__BIT(28)	/* OTG Wake-up interrupt enable */
183 #define	 USBCTRL_OBPAL			__BITS(25,26)	/* OTG Bypass value */
184 #define	 USBCTRL_OPM			__BIT(24)	/* OTG Power Mask */
185 #define	 USBCTRL_ICVOL			__BIT(23)	/* Host1 IC_USB voltage status */
186 #define	 USBCTRL_ICTPIE			__BIT(19)	/* IC USB TP interrupt enable */
187 #define	 USBCTRL_UBPCKE			__BIT(18)	/* Bypass clock enable */
188 #define	 USBCTRL_H1TCKOEN		__BIT(17)	/* Host1 ULPO PHY clock enable */
189 #define	 USBCTRL_ICTPC			__BIT(16)	/* Clear IC TP interrupt flag */
190 #define	 USBCTRL_H1WIR			__BIT(15)	/* Host1 wakeup interrupt request */
191 #define	 USBCTRL_H1SIC			__BITS(13,14)	/* Host1 serial interface config */
192 #define	 USBCTRL_H1UIE			__BIT(12)	/* Host1 ILPI interrupt enable */
193 #define	 USBCTRL_H1WIE			__BIT(11)	/* Host1 wakeup interrupt enable */
194 #define	 USBCTRL_H1BPVAL		__BITS(9,10)	/* Host1 bypass value */
195 #define	 USBCTRL_H1PM			__BIT(8)	/* Host1 power mask */
196 #define	 USBCTRL_OHSTLL			__BIT(7)	/* OTG ULPI TLL enable */
197 #define	 USBCTRL_H1HSTLL		__BIT(6)	/* Host1 ULPI TLL enable */
198 #define	 USBCTRL_H1DISFSTTL		__BIT(4)	/* Host1 serial TLL disable */
199 #define	 USBCTRL_OTCKOEN		__BIT(1)	/* OTG ULPI PHY clock enable */
200 #define	 USBCTRL_BPE			__BIT(0)	/* Bypass enable */
201 #define	USBOH3_OTGMIRROR		0x804
202 #define	USBOH3_PHYCTRL0			0x808
203 #define	 PHYCTRL0_VLOAD			__BIT(31)
204 #define	 PHYCTRL0_VCONTROL		__BITS(27,30)
205 #define	 PHYCTRL0_CONF2			__BIT(26)
206 #define	 PHYCTRL0_CONF3			__BIT(25)
207 #define	 PHYCTRL0_CHGRDETEN		__BIT(24)
208 #define	 PHYCTRL0_CHGRDETON		__BIT(23)
209 #define	 PHYCTRL0_VSTATUS		__BITS(15,22)
210 #define	 PHYCTRL0_SUSPENDM		__BIT(12)
211 #define	 PHYCTRL0_RESET			__BIT(11)
212 #define	 PHYCTRL0_UTMI_ON_CLOCK		__BIT(10)
213 #define	 PHYCTRL0_OTG_OVER_CUR_POL	__BIT(9)
214 #define	 PHYCTRL0_OTG_OVER_CUR_DIS	__BIT(8)
215 #define	 PHYCTRL0_OTG_XCVR_CLK_SEL	__BIT(7)
216 #define	 PHYCTRL0_H1_OVER_CUR_POL	__BIT(6)
217 #define	 PHYCTRL0_H1_OVER_CUR_DIS	__BIT(5)
218 #define	 PHYCTRL0_H1_XCVR_CLK_SEL	__BIT(4)
219 #define	 PHYCTRL0_PWR_POL		__BIT(3)
220 #define	 PHYCTRL0_CHRGDET		__BIT(2)
221 #define	 PHYCTRL0_CHRGDET_INT_EN	__BIT(1)
222 #define	 PHYCTRL0_CHRGDET_INT_FLG	__BIT(0)
223 #define	USBOH3_PHYCTRL1			0x80c
224 #define	 PHYCTRL1_PLLDIVVALUE_MASK	__BITS(0,1)
225 #define	 PHYCTRL1_PLLDIVVALUE_19MHZ	0	/* 19.2MHz */
226 #define	 PHYCTRL1_PLLDIVVALUE_24MHZ	1
227 #define	 PHYCTRL1_PLLDIVVALUE_26MHZ	2
228 #define	 PHYCTRL1_PLLDIVVALUE_27MHZ	3
229 #define	USBOH3_USBCTRL1			0x810
230 #define	 USBCTRL1_UH3_EXT_CLK_EN	__BIT(27)
231 #define	 USBCTRL1_UH2_EXT_CLK_EN	__BIT(26)
232 #define	 USBCTRL1_UH1_EXT_CLK_EN	__BIT(25)
233 #define	 USBCTRL1_OTG_EXT_CLK_EN	__BIT(24)
234 #define	USBOH3_USBCTRL2			0x814
235 #define	USBOH3_USBCTRL3			0x818
236 #define	USBOH3_UH1_PHY_CTRL_0		0x81c
237 #define	USBOH3_UH1_PHY_CTRL_1		0x820
238 #define	USBOH3_USB_CLKONOFF_CTRL  	0x824
239 #define	 USB_CLKONOFF_CTRL_H1_AHBCLK_OFF	__BIT(18)
240 #define	 USB_CLKONOFF_CTRL_OTG_AHBCLK_OFF	__BIT(17)
241 
242 #define	USBOH3_SIZE	0x4000
243 
244 /* GPIO module */
245 
246 #define	GPIO_BASE(n)				      \
247 	(AIPSTZ1_BASE + (((n) <= 4) ?		      \
248 	    0x03f84000 + 0x4000 * ((n) - 1) :	      \
249 	    0x03fdc000 + 0x4000 * ((n) - 5)))
250 
251 #define	GPIO1_BASE	GPIO_BASE(1)
252 #define	GPIO2_BASE	GPIO_BASE(2)
253 #define	GPIO3_BASE	GPIO_BASE(3)
254 #define	GPIO4_BASE	GPIO_BASE(4)
255 #define	GPIO5_BASE	GPIO_BASE(5)
256 #define	GPIO6_BASE	GPIO_BASE(6)
257 
258 #ifdef IMX50
259 #define	GPIO_NGROUPS		6
260 #else
261 #define	GPIO_NGROUPS		4
262 #endif
263 
264 #define	KPP_BASE	(AIPSTZ1_BASE + 0x03f94000)
265 /* register definitions in imxkppreg.h */
266 
267 #define	WDOG1_BASE	(AIPSTZ1_BASE + 0x03f98000)
268 #define	WDOG2_BASE	(AIPSTZ1_BASE + 0x03f9c000)
269 #define	WDOG_SIZE	0x4000
270 
271 #define	GPT_BASE	(AIPSTZ1_BASE + 0x03fa0000)
272 #define	GPT_SIZE	0x4000
273 
274 #define	SRTC_BASE	(AIPSTZ1_BASE + 0x03fa4000)
275 #define	SRTC_SIZE	0x4000
276 
277 /* IO multiplexor */
278 #define	IOMUXC_BASE	(AIPSTZ1_BASE + 0x03fa8000)
279 #define	IOMUXC_SIZE	0x4000
280 
281 #define	IOMUXC_MUX_CTL		0x001c		/* multiprex control */
282 #define	 IOMUX_CONFIG_SION	__BIT(4)
283 #define	 IOMUX_CONFIG_ALT0	(0)
284 #define	 IOMUX_CONFIG_ALT1	(1)
285 #define	 IOMUX_CONFIG_ALT2	(2)
286 #define	 IOMUX_CONFIG_ALT3	(3)
287 #define	 IOMUX_CONFIG_ALT4	(4)
288 #define	 IOMUX_CONFIG_ALT5	(5)
289 #define	 IOMUX_CONFIG_ALT6	(6)
290 #define	 IOMUX_CONFIG_ALT7	(7)
291 #define	IOMUXC_PAD_CTL		0x03f0		/* pad control */
292 #define	 PAD_CTL_HVE		__BIT(13)
293 #define	 PAD_CTL_DDR_INPUT	__BIT(9)
294 #define	 PAD_CTL_HYS		__BIT(8)
295 #define	 PAD_CTL_PKE		__BIT(7)
296 #define	 PAD_CTL_PUE		__BIT(6)
297 #define	 PAD_CTL_PULL		(PAD_CTL_PKE|PAD_CTL_PUE)
298 #define	 PAD_CTL_KEEPER		(PAD_CTL_PKE|0)
299 #define	 PAD_CTL_PUS_MASK	__BITS(5, 4)
300 #define	 PAD_CTL_PUS_100K_PD	__SHIFTIN(0x0, PAD_CTL_PUS_MASK)
301 #define	 PAD_CTL_PUS_47K_PU	__SHIFTIN(0x1, PAD_CTL_PUS_MASK)
302 #define	 PAD_CTL_PUS_100K_PU	__SHIFTIN(0x2, PAD_CTL_PUS_MASK)
303 #define	 PAD_CTL_PUS_22K_PU	__SHIFTIN(0x3, PAD_CTL_PUS_MASK)
304 #define	 PAD_CTL_ODE		__BIT(3)	/* opendrain */
305 #define	 PAD_CTL_DSE_MASK	__BITS(2, 1)
306 #define	 PAD_CTL_DSE_LOW	__SHIFTIN(0x0, PAD_CTL_DSE_MASK)
307 #define	 PAD_CTL_DSE_MID	__SHIFTIN(0x1, PAD_CTL_DSE_MASK)
308 #define	 PAD_CTL_DSE_HIGH	__SHIFTIN(0x2, PAD_CTL_DSE_MASK)
309 #define	 PAD_CTL_DSE_MAX	__SHIFTIN(0x3, PAD_CTL_DSE_MASK)
310 #define	 PAD_CTL_SRE		__BIT(0)
311 #define	IOMUXC_INPUT_CTL	0x08c4		/* input control */
312 #define	 INPUT_DAISY_0		0
313 #define	 INPUT_DAISY_1		1
314 #define	 INPUT_DAISY_2		2
315 #define	 INPUT_DAISY_3		3
316 #define	 INPUT_DAISY_4		4
317 #define	 INPUT_DAISY_5		5
318 #define	 INPUT_DAISY_6		6
319 #define	 INPUT_DAISY_7		7
320 
321 /*
322  * IOMUX index
323  */
324 #define	IOMUX_PIN_TO_MUX_ADDRESS(pin)	(((pin) >> 16) & 0xffff)
325 #define	IOMUX_PIN_TO_PAD_ADDRESS(pin)	(((pin) >>  0) & 0xffff)
326 
327 #define	IOMUX_PIN(mux_adr, pad_adr)			\
328 	(((mux_adr) << 16) | (((pad_adr) << 0)))
329 #define	IOMUX_MUX_NONE	0xffff
330 #define	IOMUX_PAD_NONE	0xffff
331 
332 /* EPIT */
333 #define	EPIT1_BASE	(AIPSTZ1_BASE + 0x03FAC000)
334 #define	EPIT2_BASE	(AIPSTZ1_BASE + 0x03FB0000)
335 /* register definitions in imxepitreg.h */
336 
337 #define	PWM1_BASE	(AIPSTZ1_BASE + 0x03fb4000)
338 #define	PWM2_BASE	(AIPSTZ1_BASE + 0x03fb8000)
339 #define	PWM_SIZE	0x4000
340 
341 #define	SRC_BASE	(AIPSTZ1_BASE + 0x03fd0000)
342 #define	SRC_SIZE	0x4000
343 
344 #define	CCM_BASE	(AIPSTZ1_BASE + 0x03fd4000)
345 #define	CCM_SIZE	0x4000
346 
347 #define	GPC_BASE	(AIPSTZ1_BASE + 0x03fd8000)
348 #define	GPC_SIZE	0x4000
349 
350 #define	AHBMAX_BASE	(AIPSTZ2_BASE + 0x03f94000)
351 #define	AHBMAX_SIZE	0x4000
352 
353 #define	IIM_BASE	(AIPSTZ2_BASE + 0x03f98000)
354 #define	IIM_SIZE	0x4000
355 
356 #define	CSU_BASE	(AIPSTZ2_BASE + 0x03f9c000)
357 #define	CSU_SIZE	0x4000
358 
359 #define	OWIRE_BASE	(AIPSTZ2_BASE + 0x03fa4000)
360 #define	OWIRE_SIZE	0x4000
361 
362 #define	FIRI_BASE	(AIPSTZ2_BASE + 0x03fa8000)
363 #define	FIRI_SIZE	0x4000
364 
365 
366 #define	SDMA_BASE	(AIPSTZ2_BASE + 0x03fb0000)
367 #define	SDMA_SIZE	0x4000
368 /* see imxsdmareg.h for register definitions */
369 
370 #define	SCC_BASE	(AIPSTZ2_BASE + 0x03fb4000)
371 #define	SCC_SIZE	0x4000
372 
373 #define	ROMCP_BASE	(AIPSTZ2_BASE + 0x03fb8000)
374 #define	ROMCP_SIZE	0x4000
375 
376 #define	RTIC_BASE	(AIPSTZ2_BASE + 0x03fbc000)
377 #define	RTIC_SIZE	0x4000
378 
379 #define	CSPI_BASE	(AIPSTZ2_BASE + 0x03fc0000)
380 #define	CSPI_SIZE	0x4000
381 
382 #define	I2C1_BASE	(AIPSTZ2_BASE + 0x03fc8000)
383 #define	I2C2_BASE	(AIPSTZ2_BASE + 0x03fc4000)
384 #define	I2C_SIZE	0x4000
385 
386 #define	AUDMUX_BASE	(AIPSTZ2_BASE + 0x03fd0000)
387 #define	AUDMUX_SIZE	0x4000
388 #define	AUDMUX_PTCR(n)	((n - 1) * 0x8)
389 #define	 PTCR_TFSDIR	(1 << 31)
390 #define	 PTCR_TFSEL(x)	(((x) & 0x7) << 27)
391 #define	 PTCR_TCLKDIR	(1 << 26)
392 #define	 PTCR_TCSEL(x)	(((x) & 0x7) << 22)
393 #define	 PTCR_RFSDIR	(1 << 21)
394 #define	 PTCR_RFSEL(x)	(((x) & 0x7) << 17)
395 #define	 PTCR_RCLKDIR	(1 << 16)
396 #define	 PTCR_RCSEL(x)	(((x) & 0x7) << 12)
397 #define	 PTCR_SYN	(1 << 11)
398 
399 #define	AUDMUX_PDCR(n)	((n - 1) * 0x8 + 0x4)
400 #define	 PDCR_RXDSEL(x)	(((x) & 0x7) << 13)
401 #define	 PDCR_TXRXEN	(1 << 12)
402 #define	 PDCR_MODE(x)	(((x) & 0x3) << 8)
403 #define	 PDCR_INMMASK(x)	(((x) & 0xff) << 0)
404 #define	AUDMUX_CNMCR	0x38
405 
406 #define	EMI_BASE	(AIPSTZ2_BASE + 0x03fd8000)
407 #define	EMI_SIZE	0x4000
408 
409 #define	SIM_BASE	(AIPSTZ2_BASE + 0x03fe4000)
410 #define	SIM_SIZE	0x4000
411 
412 #define	FEC_BASE	(AIPSTZ2_BASE + 0x03fec000)
413 #define	FEC_SIZE	0x4000
414 #define	TVE_BASE	(AIPSTZ2_BASE + 0x03ff0000)
415 #define	TVE_SIZE	0x4000
416 #define	VPU_BASE	(AIPSTZ2_BASE + 0x03ff4000)
417 #define	VPU_SIZE	0x4000
418 #define	SAHARA_BASE	(AIPSTZ2_BASE + 0x03ff8000)
419 #define	SAHARA_SIZE	0x4000
420 
421 #define	DPLL_BASE(n)	((AIPSTZ2_BASE + 0x03F80000 + (0x4000 * ((n)-1))))
422 #define	DPLL_SIZE	0x4000
423 
424 #endif /* _ARM_IMX_IMX51REG_H_ */
425