1 /* $NetBSD: bzsc.c,v 1.50 2019/01/08 19:41:09 jdolecek Exp $ */ 2 3 /* 4 * Copyright (c) 1997 Michael L. Hitch 5 * Copyright (c) 1995 Daniel Widenfalk 6 * Copyright (c) 1994 Christian E. Hopps 7 * Copyright (c) 1982, 1990 The Regents of the University of California. 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. All advertising materials mentioning features or use of this software 19 * must display the following acknowledgement: 20 * This product includes software developed by Daniel Widenfalk 21 * and Michael L. Hitch. 22 * 4. Neither the name of the University nor the names of its contributors 23 * may be used to endorse or promote products derived from this software 24 * without specific prior written permission. 25 * 26 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 27 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 28 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 29 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 30 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 31 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 32 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 33 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 34 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 35 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 36 * SUCH DAMAGE. 37 */ 38 39 #ifdef __m68k__ 40 #include "opt_m68k_arch.h" 41 #endif 42 43 #include <sys/cdefs.h> 44 __KERNEL_RCSID(0, "$NetBSD: bzsc.c,v 1.50 2019/01/08 19:41:09 jdolecek Exp $"); 45 46 /* 47 * Initial amiga Blizzard 1230-II driver by Daniel Widenfalk. Conversion to 48 * 53c9x MI driver by Michael L. Hitch (mhitch@montana.edu). 49 */ 50 51 #include <sys/types.h> 52 #include <sys/param.h> 53 #include <sys/systm.h> 54 #include <sys/kernel.h> 55 #include <sys/errno.h> 56 #include <sys/ioctl.h> 57 #include <sys/device.h> 58 #include <sys/buf.h> 59 #include <sys/proc.h> 60 #include <sys/queue.h> 61 62 #include <dev/scsipi/scsi_all.h> 63 #include <dev/scsipi/scsipi_all.h> 64 #include <dev/scsipi/scsiconf.h> 65 #include <dev/scsipi/scsi_message.h> 66 67 #include <machine/cpu.h> 68 69 #include <dev/ic/ncr53c9xreg.h> 70 #include <dev/ic/ncr53c9xvar.h> 71 72 #include <amiga/amiga/isr.h> 73 #include <amiga/dev/bzscvar.h> 74 #include <amiga/dev/zbusvar.h> 75 76 #ifdef __powerpc__ 77 #define badaddr(a) badaddr_read(a, 2, NULL) 78 #endif 79 80 int bzscmatch(device_t, cfdata_t, void *); 81 void bzscattach(device_t, device_t, void *); 82 83 /* Linkup to the rest of the kernel */ 84 CFATTACH_DECL_NEW(bzsc, sizeof(struct bzsc_softc), 85 bzscmatch, bzscattach, NULL, NULL); 86 87 /* 88 * Functions and the switch for the MI code. 89 */ 90 uint8_t bzsc_read_reg(struct ncr53c9x_softc *, int); 91 void bzsc_write_reg(struct ncr53c9x_softc *, int, uint8_t); 92 int bzsc_dma_isintr(struct ncr53c9x_softc *); 93 void bzsc_dma_reset(struct ncr53c9x_softc *); 94 int bzsc_dma_intr(struct ncr53c9x_softc *); 95 int bzsc_dma_setup(struct ncr53c9x_softc *, uint8_t **, 96 size_t *, int, size_t *); 97 void bzsc_dma_go(struct ncr53c9x_softc *); 98 void bzsc_dma_stop(struct ncr53c9x_softc *); 99 int bzsc_dma_isactive(struct ncr53c9x_softc *); 100 101 struct ncr53c9x_glue bzsc_glue = { 102 bzsc_read_reg, 103 bzsc_write_reg, 104 bzsc_dma_isintr, 105 bzsc_dma_reset, 106 bzsc_dma_intr, 107 bzsc_dma_setup, 108 bzsc_dma_go, 109 bzsc_dma_stop, 110 bzsc_dma_isactive, 111 NULL, 112 }; 113 114 /* Maximum DMA transfer length to reduce impact on high-speed serial input */ 115 u_long bzsc_max_dma = 1024; 116 extern int ser_open_speed; 117 118 u_long bzsc_cnt_pio = 0; /* number of PIO transfers */ 119 u_long bzsc_cnt_dma = 0; /* number of DMA transfers */ 120 u_long bzsc_cnt_dma2 = 0; /* number of DMA transfers broken up */ 121 u_long bzsc_cnt_dma3 = 0; /* number of pages combined */ 122 123 #ifdef DEBUG 124 struct { 125 uint8_t hardbits; 126 uint8_t status; 127 uint8_t xx; 128 uint8_t yy; 129 } bzsc_trace[128]; 130 int bzsc_trace_ptr = 0; 131 int bzsc_trace_enable = 1; 132 void bzsc_dump(void); 133 #endif 134 135 /* 136 * if we are a Phase5 Blizzard 1230 II 137 */ 138 int 139 bzscmatch(device_t parent, cfdata_t cf, void *aux) 140 { 141 struct zbus_args *zap; 142 volatile uint8_t *regs; 143 144 zap = aux; 145 if (zap->manid != 0x2140 || zap->prodid != 11) 146 return 0; /* It's not Blizzard 1230 */ 147 if (!is_a1200()) 148 return 0; /* And not A1200 */ 149 regs = &((volatile uint8_t *)zap->va)[0x10000]; 150 if (badaddr((void *)__UNVOLATILE(regs))) 151 return 0; 152 regs[NCR_CFG1 * 2] = 0; 153 regs[NCR_CFG1 * 2] = NCRCFG1_PARENB | 7; 154 delay(5); 155 if (regs[NCR_CFG1 * 2] != (NCRCFG1_PARENB | 7)) 156 return 0; 157 return 1; 158 } 159 160 /* 161 * Attach this instance, and then all the sub-devices 162 */ 163 void 164 bzscattach(device_t parent, device_t self, void *aux) 165 { 166 struct bzsc_softc *bsc = device_private(self); 167 struct ncr53c9x_softc *sc = &bsc->sc_ncr53c9x; 168 struct zbus_args *zap; 169 extern u_long scsi_nosync; 170 extern int shift_nosync; 171 extern int ncr53c9x_debug; 172 173 /* 174 * Set up the glue for MI code early; we use some of it here. 175 */ 176 sc->sc_dev = self; 177 sc->sc_glue = &bzsc_glue; 178 179 /* 180 * Save the regs 181 */ 182 zap = aux; 183 bsc->sc_reg = &((volatile uint8_t *)zap->va)[0x10000]; 184 bsc->sc_dmabase = &bsc->sc_reg[0x21]; 185 186 sc->sc_freq = 40; /* Clocked at 40 MHz */ 187 188 aprint_normal(": address %p", bsc->sc_reg); 189 190 sc->sc_id = 7; 191 192 /* 193 * It is necessary to try to load the 2nd config register here, 194 * to find out what rev the FAS chip is, else the ncr53c9x_reset 195 * will not set up the defaults correctly. 196 */ 197 sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB; 198 sc->sc_cfg2 = NCRCFG2_SCSI2 | NCRCFG2_FE; 199 sc->sc_cfg3 = 0x08 /*FCLK*/ | NCRESPCFG3_FSCSI | NCRESPCFG3_CDB; 200 sc->sc_rev = NCR_VARIANT_FAS216; 201 202 /* 203 * This is the value used to start sync negotiations 204 * Note that the NCR register "SYNCTP" is programmed 205 * in "clocks per byte", and has a minimum value of 4. 206 * The SCSI period used in negotiation is one-fourth 207 * of the time (in nanoseconds) needed to transfer one byte. 208 * Since the chip's clock is given in MHz, we have the following 209 * formula: 4 * period = (1000 / freq) * 4 210 */ 211 sc->sc_minsync = 1000 / sc->sc_freq; 212 213 /* 214 * get flags from -I argument and set cf_flags. 215 * NOTE: low 8 bits are to disable disconnect, and the next 216 * 8 bits are to disable sync. 217 */ 218 device_cfdata(self)->cf_flags |= (scsi_nosync >> shift_nosync) 219 & 0xffff; 220 shift_nosync += 16; 221 222 /* Use next 16 bits of -I argument to set ncr53c9x_debug flags */ 223 ncr53c9x_debug |= (scsi_nosync >> shift_nosync) & 0xffff; 224 shift_nosync += 16; 225 226 #if 1 227 if (((scsi_nosync >> shift_nosync) & 0xff00) == 0xff00) 228 sc->sc_minsync = 0; 229 #endif 230 231 /* Really no limit, but since we want to fit into the TCR... */ 232 sc->sc_maxxfer = 64 * 1024; 233 234 /* 235 * Configure interrupts. 236 */ 237 bsc->sc_isr.isr_intr = ncr53c9x_intr; 238 bsc->sc_isr.isr_arg = sc; 239 bsc->sc_isr.isr_ipl = 2; 240 add_isr(&bsc->sc_isr); 241 242 /* 243 * Now try to attach all the sub-devices 244 */ 245 sc->sc_adapter.adapt_request = ncr53c9x_scsipi_request; 246 sc->sc_adapter.adapt_minphys = minphys; 247 ncr53c9x_attach(sc); 248 } 249 250 /* 251 * Glue functions. 252 */ 253 254 uint8_t 255 bzsc_read_reg(struct ncr53c9x_softc *sc, int reg) 256 { 257 struct bzsc_softc *bsc = (struct bzsc_softc *)sc; 258 259 return bsc->sc_reg[reg * 2]; 260 } 261 262 void 263 bzsc_write_reg(struct ncr53c9x_softc *sc, int reg, uint8_t val) 264 { 265 struct bzsc_softc *bsc = (struct bzsc_softc *)sc; 266 uint8_t v = val; 267 268 bsc->sc_reg[reg * 2] = v; 269 #ifdef DEBUG 270 if (bzsc_trace_enable/* && sc->sc_nexus && sc->sc_nexus->xs->xs_control & XS_CTL_POLL*/ && 271 reg == NCR_CMD/* && bsc->sc_active*/) { 272 bzsc_trace[(bzsc_trace_ptr - 1) & 127].yy = v; 273 /* printf(" cmd %x", v);*/ 274 } 275 #endif 276 } 277 278 int 279 bzsc_dma_isintr(struct ncr53c9x_softc *sc) 280 { 281 struct bzsc_softc *bsc = (struct bzsc_softc *)sc; 282 283 if ((bsc->sc_reg[NCR_STAT * 2] & NCRSTAT_INT) == 0) 284 return 0; 285 286 #ifdef DEBUG 287 if (/*sc->sc_nexus && sc->sc_nexus->xs->xs_control & XS_CTL_POLL &&*/ bzsc_trace_enable) { 288 bzsc_trace[bzsc_trace_ptr].status = bsc->sc_reg[NCR_STAT * 2]; 289 bzsc_trace[bzsc_trace_ptr].xx = bsc->sc_reg[NCR_CMD * 2]; 290 bzsc_trace[bzsc_trace_ptr].yy = bsc->sc_active; 291 bzsc_trace_ptr = (bzsc_trace_ptr + 1) & 127; 292 } 293 #endif 294 return 1; 295 } 296 297 void 298 bzsc_dma_reset(struct ncr53c9x_softc *sc) 299 { 300 struct bzsc_softc *bsc = (struct bzsc_softc *)sc; 301 302 bsc->sc_active = 0; 303 } 304 305 int 306 bzsc_dma_intr(struct ncr53c9x_softc *sc) 307 { 308 struct bzsc_softc *bsc = (struct bzsc_softc *)sc; 309 int cnt; 310 311 NCR_DMA(("bzsc_dma_intr: cnt %d int %x stat %x fifo %d ", 312 bsc->sc_dmasize, sc->sc_espintr, sc->sc_espstat, 313 bsc->sc_reg[NCR_FFLAG * 2] & NCRFIFO_FF)); 314 if (bsc->sc_active == 0) { 315 printf("bzsc_intr--inactive DMA\n"); 316 return -1; 317 } 318 319 /* update sc_dmaaddr and sc_pdmalen */ 320 cnt = bsc->sc_reg[NCR_TCL * 2]; 321 cnt += bsc->sc_reg[NCR_TCM * 2] << 8; 322 cnt += bsc->sc_reg[NCR_TCH * 2] << 16; 323 if (!bsc->sc_datain) { 324 cnt += bsc->sc_reg[NCR_FFLAG * 2] & NCRFIFO_FF; 325 bsc->sc_reg[NCR_CMD * 2] = NCRCMD_FLUSH; 326 } 327 cnt = bsc->sc_dmasize - cnt; /* number of bytes transferred */ 328 NCR_DMA(("DMA xferred %d\n", cnt)); 329 if (bsc->sc_xfr_align) { 330 memcpy(*bsc->sc_dmaaddr, bsc->sc_alignbuf, cnt); 331 bsc->sc_xfr_align = 0; 332 } 333 *bsc->sc_dmaaddr += cnt; 334 *bsc->sc_pdmalen -= cnt; 335 bsc->sc_active = 0; 336 return 0; 337 } 338 339 int 340 bzsc_dma_setup(struct ncr53c9x_softc *sc, uint8_t **addr, size_t *len, 341 int datain, size_t *dmasize) 342 { 343 struct bzsc_softc *bsc = (struct bzsc_softc *)sc; 344 paddr_t pa; 345 uint8_t *ptr; 346 size_t xfer; 347 348 bsc->sc_dmaaddr = addr; 349 bsc->sc_pdmalen = len; 350 bsc->sc_datain = datain; 351 bsc->sc_dmasize = *dmasize; 352 /* 353 * DMA can be nasty for high-speed serial input, so limit the 354 * size of this DMA operation if the serial port is running at 355 * a high speed (higher than 19200 for now - should be adjusted 356 * based on CPU type and speed?). 357 * XXX - add serial speed check XXX 358 */ 359 if (ser_open_speed > 19200 && bzsc_max_dma != 0 && 360 bsc->sc_dmasize > bzsc_max_dma) 361 bsc->sc_dmasize = bzsc_max_dma; 362 ptr = *addr; /* Kernel virtual address */ 363 pa = kvtop(ptr); /* Physical address of DMA */ 364 xfer = uimin(bsc->sc_dmasize, PAGE_SIZE - (pa & (PAGE_SIZE - 1))); 365 bsc->sc_xfr_align = 0; 366 /* 367 * If output and unaligned, stuff odd byte into FIFO 368 */ 369 if (datain == 0 && (int)ptr & 1) { 370 NCR_DMA(("bzsc_dma_setup: align byte written to fifo\n")); 371 pa++; 372 xfer--; /* XXXX CHECK THIS !!!! XXXX */ 373 bsc->sc_reg[NCR_FIFO * 2] = *ptr++; 374 } 375 /* 376 * If unaligned address, read unaligned bytes into alignment buffer 377 */ 378 else if ((int)ptr & 1) { 379 pa = kvtop((void *)&bsc->sc_alignbuf); 380 xfer = bsc->sc_dmasize = uimin(xfer, sizeof(bsc->sc_alignbuf)); 381 NCR_DMA(("bzsc_dma_setup: align read by %d bytes\n", xfer)); 382 bsc->sc_xfr_align = 1; 383 } 384 ++bzsc_cnt_dma; /* number of DMA operations */ 385 386 while (xfer < bsc->sc_dmasize) { 387 if ((pa + xfer) != kvtop(*addr + xfer)) 388 break; 389 if ((bsc->sc_dmasize - xfer) < PAGE_SIZE) 390 xfer = bsc->sc_dmasize; 391 else 392 xfer += PAGE_SIZE; 393 ++bzsc_cnt_dma3; 394 } 395 if (xfer != *len) 396 ++bzsc_cnt_dma2; 397 398 bsc->sc_dmasize = xfer; 399 *dmasize = bsc->sc_dmasize; 400 bsc->sc_pa = pa; 401 #if defined(M68040) || defined(M68060) 402 if (mmutype == MMU_68040) { 403 if (bsc->sc_xfr_align) { 404 dma_cachectl(bsc->sc_alignbuf, 405 sizeof(bsc->sc_alignbuf)); 406 } 407 else 408 dma_cachectl(*bsc->sc_dmaaddr, bsc->sc_dmasize); 409 } 410 #endif 411 412 pa >>= 1; 413 if (!bsc->sc_datain) 414 pa |= 0x80000000; 415 bsc->sc_dmabase[0x10] = (uint8_t)(pa >> 24); 416 bsc->sc_dmabase[0] = (uint8_t)(pa >> 16); 417 bsc->sc_dmabase[0] = (uint8_t)(pa >> 8); 418 bsc->sc_dmabase[0] = (uint8_t)(pa); 419 bsc->sc_active = 1; 420 return 0; 421 } 422 423 void 424 bzsc_dma_go(struct ncr53c9x_softc *sc) 425 { 426 } 427 428 void 429 bzsc_dma_stop(struct ncr53c9x_softc *sc) 430 { 431 } 432 433 int 434 bzsc_dma_isactive(struct ncr53c9x_softc *sc) 435 { 436 struct bzsc_softc *bsc = (struct bzsc_softc *)sc; 437 438 return bsc->sc_active; 439 } 440 441 #ifdef DEBUG 442 void 443 bzsc_dump(void) 444 { 445 int i; 446 447 i = bzsc_trace_ptr; 448 printf("bzsc_trace dump: ptr %x\n", bzsc_trace_ptr); 449 do { 450 if (bzsc_trace[i].hardbits == 0) { 451 i = (i + 1) & 127; 452 continue; 453 } 454 printf("%02x%02x%02x%02x(", bzsc_trace[i].hardbits, 455 bzsc_trace[i].status, bzsc_trace[i].xx, bzsc_trace[i].yy); 456 if (bzsc_trace[i].status & NCRSTAT_INT) 457 printf("NCRINT/"); 458 if (bzsc_trace[i].status & NCRSTAT_TC) 459 printf("NCRTC/"); 460 switch(bzsc_trace[i].status & NCRSTAT_PHASE) { 461 case 0: 462 printf("dataout"); break; 463 case 1: 464 printf("datain"); break; 465 case 2: 466 printf("cmdout"); break; 467 case 3: 468 printf("status"); break; 469 case 6: 470 printf("msgout"); break; 471 case 7: 472 printf("msgin"); break; 473 default: 474 printf("phase%d?", bzsc_trace[i].status & NCRSTAT_PHASE); 475 } 476 printf(") "); 477 i = (i + 1) & 127; 478 } while (i != bzsc_trace_ptr); 479 printf("\n"); 480 } 481 #endif 482