xref: /netbsd-src/sys/arch/amiga/conf/INSTALL (revision 6fc217346bb51c463d3a5a2a7883cb56515cd6d7)
1# $NetBSD: INSTALL,v 1.84 2009/01/12 19:16:26 mhitch Exp $
2#
3# This file was automatically created.
4# Changes will be lost when make is run in this directory.
5#
6# Created from: # NetBSD: GENERIC.in,v 1.72 2009/01/12 19:11:41 mhitch Exp $
7#
8# GENERIC machine description file
9#
10# This machine description file is used to generate the default NetBSD
11# kernel.  The generic kernel does not include all options, subsystems
12# and device drivers, but should be useful for most applications.
13#
14# The machine description file can be customised for your specific
15# machine to reduce the kernel size and improve its performance.
16#
17# For further information on compiling NetBSD kernels, see the config(8)
18# man page.
19#
20# For further information on hardware support for this architecture, see
21# the intro(4) man page.  For further information about kernel options
22# for this architecture, see the options(4) man page.  For an explanation
23# of each device driver in this file see the section 4 man page for the
24# device.
25
26
27include "arch/amiga/conf/std.amiga"
28
29options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
30
31#ident 		"GENERIC-$Revision: 1.84 $"
32
33makeoptions	COPTS="-Os"
34
35maxusers	8
36options 	RTC_OFFSET=0
37
38#
39# mainboards to support (in addition to Amiga)
40#
41options 	DRACO
42options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
43				# MC68060 with an OS ROM up to (at least)
44				# V40 (OS3.1) and want to boot with the
45				# bootblock.
46				# You do not need this if you have a DraCo,
47				# have no 68060 or NEVER use the bootblock
48options 	P5PPC68KBOARD	# Phase5 PPC/68K board support
49#
50# processors this kernel should support
51#
52options 	M68060		# support for 060
53options 	M060SP		# MC68060 software support (Required for 060)
54options 	M68040		# support for 040
55options 	FPSP		# MC68040 floating point support
56options 	M68030		# support for 030
57options 	M68020		# support for 020/851
58options 	FPU_EMULATE	# FPU emulation
59
60#
61# Networking options
62#
63options 	INET		# IP networking support (Required)
64options 	INET6		# IPV6
65#options 	IPSEC		# IP security
66#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
67#options 	IPSEC_NAT_T	# IPsec NAT traversal (NAT-T)
68#options 	IPSEC_DEBUG	# debug for IP security
69#options 	GATEWAY		# Packet forwarding
70#options 	DIRECTED_BROADCAST	# Broadcast across subnets
71
72
73options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
74options 	PPP_DEFLATE	# Deflate compression support for PPP
75options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
76options 	PFIL_HOOKS	# pfil(9) packet filter hooks
77options 	IPFILTER_LOG	# ipmon(8) log support
78options 	IPFILTER_LOOKUP	# ippool(8) support
79#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
80
81#options 	ALTQ		# Manipulate network interfaces' output queues
82#options 	ALTQ_BLUE	# Stochastic Fair Blue
83#options 	ALTQ_CBQ	# Class-Based Queueing
84#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
85#options 	ALTQ_FIFOQ	# First-In First-Out Queue
86#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
87#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
88#options 	ALTQ_LOCALQ	# Local queueing discipline
89#options 	ALTQ_PRIQ	# Priority Queueing
90#options 	ALTQ_RED	# Random Early Detection
91#options 	ALTQ_RIO	# RED with IN/OUT
92#options 	ALTQ_WFQ	# Weighted Fair Queueing
93
94# Filesystems
95file-system 	FFS		# Berkeley fast file system
96file-system 	EXT2FS		# second extended file system (linux)
97#file-system 	LFS		# log-structured filesystem (experimental)
98
99
100file-system 	NFS		# Network File System client side code
101file-system 	ADOSFS		# AmigaDOS file system
102file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
103file-system 	MSDOSFS		# MS-DOS filesystem
104
105file-system 	KERNFS		# kernel data-structure filesystem
106
107
108# Filesystem options
109
110#options 	FFS_EI		# FFS Endian Independant support
111options 	WAPBL		# File system journaling support - Experimental
112
113
114#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
115				# immutable) behave as system flags.
116
117#
118# Compatibility options for various existing systems
119#
120
121
122options 	EXEC_AOUT	# 32-bit aout executables (NetBSD-1.5.x)
123options 	COMPAT_AOUT_M68K # actually make some system calls work.
124options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.
125
126
127#
128# Support for various kernel options
129#
130
131#options 	INSECURE	# disable kernel security levels
132options 	SCSIVERBOSE	# human readable SCSI error messages
133options 	USERCONF	# userconf(4) support
134options 	PIPE_SOCKETPAIR		# smaller, but slower pipe(2)
135options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
136
137# Enable experimental buffer queue strategy for better responsiveness under
138# high disk I/O load. Use it with caution - it's not proven to be stable yet.
139#options 	BUFQ_READPRIO
140#options 	BUFQ_PRIOCSCAN
141
142#
143# Misc. debugging options
144#
145options 	DDB		# Kernel debugger
146#options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
147#options 	DIAGNOSTIC	# Extra kernel sanity checks
148#options 	DEBUG		# Enable misc. kernel debugging code
149#options 	SYSCALL_DEBUG	# debug all syscalls.
150#options 	SCSIDEBUG	# Add SCSI debugging statements
151#options 	PANICBUTTON	# Forced crash via keypress (?)
152
153#
154# Amiga specific options
155#
156#options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
157				# first bank of RAM. (default: unlimited)
158#options 	NKPTADD=4	# set this for 4 additional KPT pages
159#options 	NKPTADDSHIFT=24	# set this for 1 additional KPT page
160				# per 16 MB (1<<24 bytes) of RAM
161				# uncomment and decrease this, or uncomment and
162				# increase NKPTADD if you get "out of PT pages"
163				# panics.
164
165# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
166# before the 10 secondinterval ends, or that KBDRESET does work at all.
167#options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
168
169# These options improve performance with the built-in serial port
170# on slower Amigas.  Try the larger buffers first then lev6_defer.
171#options 	SERIBUF_SIZE=4096
172#options 	SEROBUF_SIZE=32
173#options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
174
175#options	DEVRELOAD	# implement /dev/reload
176#				# currently only works for a.out kernels
177
178options 	RETINACONSOLE	# enable code to allow retina to be console
179options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
180options 	CL5426CONSOLE	# Cirrus console
181options 	CV64CONSOLE	# CyberVision console
182options 	TSENGCONSOLE	# Tseng console
183options 	CV3DCONSOLE	# CyberVision 64/3D console
184
185options 	GRF_ECS		# Enhanced Chip Set
186options 	GRF_NTSC	# NTSC
187options 	GRF_PAL		# PAL
188options 	GRF_A2024	# Support for the A2024
189options 	GRF_AGA		# AGA Chip Set
190options 	GRF_AGA_VGA	# AGA VGAONLY timing
191options 	GRF_SUPER72	# AGA Super-72
192#options 	KFONT_8X11	# 8x11 font
193
194# select a font for the console according to the character set and keymap
195# you want to use
196options        KFONT_CONS_ISO8859_1
197#options         KFONT_CONS_ISO8859_2
198
199# This is how you would tell the kernel the A2410 oscillator frequencies:
200# The used frequencies are the defaults, and do not need option setting
201#options 	ULOWELL_OSC1=36000000
202#options 	ULOWELL_OSC2=66667000
203
204# This is how you specify the blitting speed, higher values may speed up blits
205# a littel bit.  If you raise this value too much some trash may appear.
206# the commented version is the default.
207#options 	RH_MEMCLK=61000000
208# this option enables the 64 bit sprite which does not work
209# for quite a few people.  E.g. The cursor sprite will turn to a block
210# when moved to the top of the screen in X.
211#options 	RH_64BIT_SPRITE
212# enables fast scroll code appears to now work on 040 systems.
213#options 	RETINA_SPEED_HACK
214# enables the Hardwarecursor which does not work on some systems.
215#options 	RH_HARDWARECURSOR
216
217# wscons aware interface to amiga custom chips.
218# If you enable it enable also wskbd.
219#
220
221#amidisplaycc0	at mainbus0		# wscons interface to custom chips
222#wsdisplay0	at amidisplaycc0 console ?
223#options 	WSEMUL_VT100
224#options 	FONT_VT220L8x10
225#options	FONT_VT220ISO8x16
226
227grfcc0		at mainbus0		# custom chips
228grfrt0		at zbus0		# retina II
229grfrh0		at zbus0		# retina III
230grfcl*		at zbus0		# Picasso II/Piccolo/Spectrum
231grful0		at zbus0		# A2410
232grfcv0		at zbus0		# CyberVision 64
233grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
234grfcv3d0	at zbus0		# CyberVision 64/3D
235
236grf0		at grfcc0
237grf1		at grfrt0
238grf2		at grfrh0
239grf3		at grfcl?
240grf4		at grful0
241grf5		at grfcv0
242grf6		at grfet?
243grf7		at grfcv3d0
244ite0		at grf0			# terminal emulators for grfs
245ite1		at grf1			# terminal emulators for grfs
246ite2		at grf2			# terminal emulators for grfs
247ite3		at grf3			# terminal emulators for grfs
248ite4		at grf4			# terminal emulators for grfs
249ite5		at grf5			# terminal emulators for grfs
250ite6		at grf6			# terminal emulators for grfs
251ite7		at grf7			# terminal emulators for grfs
252
253msc0		at zbus0		# A2232 MSC multiport serial.
254mfc0		at zbus0		# MultiFaceCard I/O board
255mfcs0		at mfc0 unit 0		# MFC serial
256mfcs1		at mfc0 unit 1		# MFC serial
257#mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
258#mfc1		at zbus0		# MultiFaceCard 2nd I/O board
259#mfcs2		at mfc1 unit 0
260#mfcs3		at mfc1 unit 1
261#mfcp1		at mfc1 unit 0
262
263hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
264#hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
265com*		at hyper? port ?	# Hypercom3/4 serial ports
266lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
267
268#options 	IOBZCLOCK=22118400 	# default, uncomment the next line
269#options 	IOBZCLOCK=24000000	# if needed.
270
271iobl*		at zbus?		# zbus IOBlix
272com*		at iobl? port ?		# IOBlix serial ports
273lpt*		at iobl? port ?		# IOBlix parallel ports
274
275
276#
277# Keyboard device. Optionally can attach a wskbd.
278# wskbd works together with a wsdisplay so enable them both if you will.
279# Don't enable wskbd if you use ite.
280#
281# XXX in std.amiga: kbd0 at mainbus0
282
283#wskbd0		at kbd0 console ?
284
285
286#
287# Amiga Mainboard devices (sans graphics and keyboard)
288#
289
290ser0		at mainbus0		# Amiga onboard serial
291par0		at mainbus0		# Amiga onboard parallel
292ms*		at mainbus0		# Amiga mice
293fdc0		at mainbus0		# Amiga FDC
294fd*		at fdc0 unit ?		# floppy disks on the later
295a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
296a2kbbc0 	at mainbus0		# A2000 battery backed clock
297
298
299#wsmouse*	at ms?
300
301#
302# DraCo Mainboard devices (sans keyboard)
303#
304
305drbbc0		at mainbus0		# DraCo battery backed clock
306drsupio0	at mainbus0		# DraCo superio chip
307com*		at drsupio? port ?	# DraCo serial
308lpt0		at drsupio? port ?	# DraCo parallel
309
310#
311# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
312#
313
314
315# Ethernet cards:
316le*		at zbus0		# A2065, Ameristar, Ariadne
317ne*		at zbus0		# AriadneII, X-surf
318ed*		at zbus0		# Hydra, ASDG LanRover
319es*		at zbus0		# CEI A4066 EthernetPLUS
320qn*		at zbus0		# Quicknet
321
322# Arcnet
323bah*		at zbus0		# C=/Ameristar A2060 / 560
324
325# Greater Valley Product Bus
326gvpbus* 	at zbus0
327
328# scsi stuff, all possible
329gtsc0		at gvpbus?		# GVP series II scsi
330scsibus*	at gtsc0
331ahsc0		at mainbus0		# A3000 scsi
332scsibus*	at ahsc0
333atzsc0		at zbus0		# A2091 scsi
334scsibus*	at atzsc0
335wstsc0		at zbus0		# Wordsync II scsi
336scsibus*	at wstsc0
337ivsc0		at zbus0		# IVS scsi
338scsibus*	at ivsc0
339mlhsc0		at zbus0		# Hacker scsi
340scsibus*	at mlhsc0
341otgsc0		at zbus0		# 12 gauge scsi
342scsibus*	at otgsc0
343zssc0		at zbus0		# Zeus scsi
344scsibus*	at zssc0
345mgnsc0		at zbus0		# Magnum scsi
346scsibus*	at mgnsc0
347wesc0		at zbus0		# Warp Engine scsi
348scsibus*	at wesc0
349afsc0		at zbus0		# A4091 scsi
350scsibus*	at afsc0
351aftsc0		at mainbus0		# A4000T scsi
352scsibus*	at aftsc0
353flsc0		at zbus0		# FastlaneZ3 scsi
354scsibus*	at flsc0
355bzsc0		at zbus0		# Blizzard 1230 I,II scsi
356scsibus*	at bzsc0
357bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi
358scsibus*	at bzivsc0
359bztzsc0 	at zbus0		# Blizzard 2060 scsi
360scsibus*	at bztzsc0
361cbsc0		at zbus0		# CyberSCSI I
362scsibus*	at cbsc0
363cbiisc0 	at zbus0		# CyberSCSI II
364scsibus*	at cbiisc0
365cbiiisc0 	at zbus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
366scsibus*	at cbiiisc0
367empsc0		at zbus0		# Emplant scsi
368scsibus*	at empsc0
369
370wdc0		at mainbus0		# A4000 & A1200 IDE bus
371wdc*		at zbus0		# Buddha / Catweasel
372
373atabus* 	at wdc? channel ?	# ATA bus
374wd*		at atabus? drive ?	#  + drives
375atapibus*	at atabus?		# ATAPI bus
376cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
377sd*		at atapibus? drive ?	# ATAPI disk drives
378
379pccard0		at mainbus0
380pcmcia*		at pccard0
381com*		at pcmcia? function ?		# Modems and serial cards
382pcmcom*		at pcmcia? function ?		# PCMCIA multi-port serial cards
383aic*		at pcmcia? function ?		# Adaptec APA-1460 SCSI
384wdc*		at pcmcia? function ?
385awi*		at pcmcia? function ?		# BayStack 650 (802.11FH)
386ep*		at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
387mbe*		at pcmcia? function ?		# MB8696x based Ethernet
388ne*		at pcmcia? function ?		# NE2000-compatible Ethernet
389sm*		at pcmcia? function ?		# Megahertz Ethernet
390mhzc*		at pcmcia? function ?	# Megahertz Ethernet/Modem combo cards
391com*		at mhzc?
392sm*		at mhzc?
393
394
395drsc0		at mainbus0		# DraCo scsi
396scsibus*	at drsc0
397
398
399# each hard drive from low target to high
400# will configure to the next available sd unit number
401sd*	at scsibus? target ? lun ?	# scsi disks
402st*	at scsibus? target ? lun ?	# scsi tapes
403cd*	at scsibus? target ? lun ?	# scsi cds
404ch*	at scsibus? target ? lun ?	# scsi autochangers
405
406
407pseudo-device	loop			# loopback network interface
408pseudo-device	sl			# SLIP network interfaces
409pseudo-device	ppp			# PPP network interfaces
410pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
411pseudo-device	tun			# network tunnel line discipline
412pseudo-device	tap			# virtual Ethernet
413#pseudo-device	gre			# generic L3 over IP tunnel
414pseudo-device	bpfilter		# Berkeley packet filter
415#pseudo-device	carp			# Common Address Redundancy Protocol
416pseudo-device	ipfilter		# IP Filter package
417pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
418#pseudo-device	faith			# IPv[46] tcp relay translation i/f
419pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
420pseudo-device	vlan			# IEEE 802.1q encapsulation
421pseudo-device	bridge			# simple inter-network bridging
422#options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
423pseudo-device	agr			# IEEE 802.3ad link aggregation
424#pseudo-device	pf			# PF packet filter
425#pseudo-device	pflog			# PF log if
426#pseudo-device	fss		4	# file system snapshot device
427
428pseudo-device	view		4	# views (needed for grfcc)
429pseudo-device	pty		2	# pseudo-terminals
430pseudo-device	clockctl		# user control of clock subsystem
431
432#pseudo-device	wsfont			# wsfont(4) dynamic font loading support
433#pseudo-device	wsmux			# mouse & keyboard multiplexor
434
435pseudo-device	vnd			# vnode pseudo-disks
436#options 	VND_COMPRESSION		# compressed vnd(4)
437pseudo-device	ccd		4	# concatenated disk devices
438#pseudo-device	cgd		4	# cryptographic disk devices
439pseudo-device	raid		8	# RAIDframe disk driver
440options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
441# Options to enable various other RAIDframe RAID types.
442# options 	RF_INCLUDE_EVENODD=1
443# options 	RF_INCLUDE_RAID5_RS=1
444# options 	RF_INCLUDE_PARITYLOGGING=1
445# options 	RF_INCLUDE_CHAINDECLUSTER=1
446# options 	RF_INCLUDE_INTERDECLUSTER=1
447# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
448# options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
449
450pseudo-device	rnd			# /dev/random and in-kernel generator
451#options 	RND_COM			# use "com" randomness as well (BROKEN)
452
453
454# Veriexec
455#
456# a pseudo device needed for veriexec
457#pseudo-device	veriexec		1
458#
459# Uncomment the fingerprint methods below that are desired. Note that
460# removing fingerprint methods will have almost no impact on the kernel
461# code size.
462#
463#options VERIFIED_EXEC_FP_RMD160
464#options VERIFIED_EXEC_FP_SHA256
465#options VERIFIED_EXEC_FP_SHA384
466#options VERIFIED_EXEC_FP_SHA512
467#options VERIFIED_EXEC_FP_SHA1
468#options VERIFIED_EXEC_FP_MD5
469
470config	netbsd root on ? type ?
471