1# $NetBSD: GENERIC,v 1.264 2010/05/08 22:18:24 mrg Exp $ 2# 3# This file was automatically created. 4# Changes will be lost when make is run in this directory. 5# 6# Created from: # NetBSD: GENERIC.in,v 1.76 2010/05/08 22:16:25 mrg Exp $ 7# 8# GENERIC machine description file 9# 10# This machine description file is used to generate the default NetBSD 11# kernel. The generic kernel does not include all options, subsystems 12# and device drivers, but should be useful for most applications. 13# 14# The machine description file can be customised for your specific 15# machine to reduce the kernel size and improve its performance. 16# 17# For further information on compiling NetBSD kernels, see the config(8) 18# man page. 19# 20# For further information on hardware support for this architecture, see 21# the intro(4) man page. For further information about kernel options 22# for this architecture, see the options(4) man page. For an explanation 23# of each device driver in this file see the section 4 man page for the 24# device. 25 26 27include "arch/amiga/conf/std.amiga" 28 29options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31#ident "GENERIC-$Revision: 1.264 $" 32 33 34maxusers 8 35options RTC_OFFSET=0 36 37# 38# mainboards to support (in addition to Amiga) 39# 40options DRACO 41options BB060STUPIDROM # You need this, if you have a non-DraCo 42 # MC68060 with an OS ROM up to (at least) 43 # V40 (OS3.1) and want to boot with the 44 # bootblock. 45 # You do not need this if you have a DraCo, 46 # have no 68060 or NEVER use the bootblock 47options P5PPC68KBOARD # Phase5 PPC/68K board support 48# 49# processors this kernel should support 50# 51options M68060 # support for 060 52options M060SP # MC68060 software support (Required for 060) 53options M68040 # support for 040 54options FPSP # MC68040 floating point support 55options M68030 # support for 030 56options M68020 # support for 020/851 57options FPU_EMULATE # FPU emulation 58 59# 60# Networking options 61# 62options INET # IP networking support (Required) 63options INET6 # IPV6 64#options IPSEC # IP security 65#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 66#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 67#options IPSEC_DEBUG # debug for IP security 68#options GATEWAY # Packet forwarding 69#options DIRECTED_BROADCAST # Broadcast across subnets 70 71#options MROUTING # Multicast routing 72#options PIM # Protocol Independent Multicast 73#options ISO,TPIP # OSI 74#options EON # OSI tunneling over IP 75options NETATALK # AppleTalk networking protocols 76#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 77 78options PPP_BSDCOMP # BSD-Compress compression support for PPP 79options PPP_DEFLATE # Deflate compression support for PPP 80options PPP_FILTER # Active filter support for PPP (requires bpf) 81options PFIL_HOOKS # pfil(9) packet filter hooks 82options IPFILTER_LOG # ipmon(8) log support 83options IPFILTER_LOOKUP # ippool(8) support 84options IPFILTER_COMPAT # Compat for IP-Filter 85#options IPFILTER_DEFAULT_BLOCK # block all packets by default 86 87#options ALTQ # Manipulate network interfaces' output queues 88#options ALTQ_BLUE # Stochastic Fair Blue 89#options ALTQ_CBQ # Class-Based Queueing 90#options ALTQ_CDNR # Diffserv Traffic Conditioner 91#options ALTQ_FIFOQ # First-In First-Out Queue 92#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 93#options ALTQ_HFSC # Hierarchical Fair Service Curve 94#options ALTQ_LOCALQ # Local queueing discipline 95#options ALTQ_PRIQ # Priority Queueing 96#options ALTQ_RED # Random Early Detection 97#options ALTQ_RIO # RED with IN/OUT 98#options ALTQ_WFQ # Weighted Fair Queueing 99 100# Filesystems 101file-system FFS # Berkeley fast file system 102file-system EXT2FS # second extended file system (linux) 103#file-system LFS # log-structured filesystem (experimental) 104 105file-system MFS # Memory based filesystem 106 107file-system NFS # Network File System client side code 108file-system ADOSFS # AmigaDOS file system 109file-system CD9660 # ISO 9660 + Rock Ridge filesystem 110file-system MSDOSFS # MS-DOS filesystem 111 112file-system KERNFS # kernel data-structure filesystem 113 114file-system FDESC # user file descriptor filesystem 115file-system NULLFS # loopback filesystem 116file-system OVERLAY # overlay filesystem 117file-system PROCFS # /proc filesystem 118file-system UMAPFS # NULLFS + uid and gid remapping 119file-system UNION # union filesystem 120file-system SMBFS # experimental - CIFS; also needs nsmb (below) 121file-system PTYFS # /dev/pts/N support 122file-system TMPFS # Efficient memory file-system 123#file-system UDF # experimental - OSTA UDF CD/DVD file-system 124 125# Filesystem options 126 127#options FFS_EI # FFS Endian Independant support 128options WAPBL # File system journaling support - Experimental 129 130options QUOTA # User and group quotas in FFS 131#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 132options NFSSERVER # Network File System server side code 133#options FFS_NO_SNAPSHOT # No FFS snapshot support 134 135#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 136 # immutable) behave as system flags. 137 138# 139# Compatibility options for various existing systems 140# 141 142#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 143options COMPAT_43 # compatibility with 4.3BSD interfaces 144options COMPAT_09 # compatibility with NetBSD 0.9 145options COMPAT_10 # compatibility with NetBSD 1.0 146options COMPAT_12 # compatibility with NetBSD 1.2 147options COMPAT_13 # compatibility with NetBSD 1.3 148options COMPAT_14 # compatibility with NetBSD 1.4 149options COMPAT_15 # compatibility with NetBSD 1.5 150options COMPAT_16 # compatibility with NetBSD 1.6 151options COMPAT_20 # compatibility with NetBSD 2.0 152options COMPAT_30 # NetBSD 3.0 compatibility. 153options COMPAT_40 # NetBSD 4.0 compatibility. 154options COMPAT_50 # NetBSD 5.0 compatibility. 155options COMPAT_SUNOS # Support to run Sun (m68k) executables 156options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 157options COMPAT_NOMID # allow nonvalid machine id executables 158#options COMPAT_LINUX # Support to run Linux/m68k executables 159 160options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 161options COMPAT_AOUT_M68K # actually make some system calls work. 162options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 163 164# 165# Support for System V IPC facilities. 166# 167options SYSVSHM # System V-like shared memory 168options SYSVMSG # System V-like messages 169options SYSVSEM # System V-like semaphores 170options P1003_1B_SEMAPHORE # p1003.1b semaphore support 171 172# 173# Support for various kernel options 174# 175 176options KTRACE # system call tracing support 177#options INSECURE # disable kernel security levels 178options SCSIVERBOSE # human readable SCSI error messages 179options USERCONF # userconf(4) support 180options NTP # NTP phase/frequency locked loop 181#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 182 183# Enable experimental buffer queue strategy for better responsiveness under 184# high disk I/O load. Use it with caution - it's not proven to be stable yet. 185#options BUFQ_READPRIO 186#options BUFQ_PRIOCSCAN 187 188# 189# Misc. debugging options 190# 191options DDB # Kernel debugger 192#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 193#options DIAGNOSTIC # Extra kernel sanity checks 194#options DEBUG # Enable misc. kernel debugging code 195#options SYSCALL_DEBUG # debug all syscalls. 196#options SCSIDEBUG # Add SCSI debugging statements 197#options PANICBUTTON # Forced crash via keypress (?) 198 199# 200# Amiga specific options 201# 202#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 203 # first bank of RAM. (default: unlimited) 204#options NKPTADD=4 # set this for 4 additional KPT pages 205#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 206 # per 16 MB (1<<24 bytes) of RAM 207 # uncomment and decrease this, or uncomment and 208 # increase NKPTADD if you get "out of PT pages" 209 # panics. 210 211# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 212# before the 10 secondinterval ends, or that KBDRESET does work at all. 213#options KBDRESET # sync on Ctrl-Amiga-Amiga 214 215# These options improve performance with the built-in serial port 216# on slower Amigas. Try the larger buffers first then lev6_defer. 217#options SERIBUF_SIZE=4096 218#options SEROBUF_SIZE=32 219#options LEV6_DEFER # defers l6 to l4 (below serial l5) 220 221#options DEVRELOAD # implement /dev/reload 222# # currently only works for a.out kernels 223 224options RETINACONSOLE # enable code to allow retina to be console 225options ULOWELLCONSOLE # enable code to allow a2410 to be console 226options CL5426CONSOLE # Cirrus console 227options CV64CONSOLE # CyberVision console 228options TSENGCONSOLE # Tseng console 229options CV3DCONSOLE # CyberVision 64/3D console 230 231options GRF_ECS # Enhanced Chip Set 232options GRF_NTSC # NTSC 233options GRF_PAL # PAL 234options GRF_A2024 # Support for the A2024 235options GRF_AGA # AGA Chip Set 236options GRF_AGA_VGA # AGA VGAONLY timing 237options GRF_SUPER72 # AGA Super-72 238#options KFONT_8X11 # 8x11 font 239 240# select a font for the console according to the character set and keymap 241# you want to use 242options KFONT_CONS_ISO8859_1 243#options KFONT_CONS_ISO8859_2 244 245# This is how you would tell the kernel the A2410 oscillator frequencies: 246# The used frequencies are the defaults, and do not need option setting 247#options ULOWELL_OSC1=36000000 248#options ULOWELL_OSC2=66667000 249 250# This is how you specify the blitting speed, higher values may speed up blits 251# a littel bit. If you raise this value too much some trash may appear. 252# the commented version is the default. 253#options RH_MEMCLK=61000000 254# this option enables the 64 bit sprite which does not work 255# for quite a few people. E.g. The cursor sprite will turn to a block 256# when moved to the top of the screen in X. 257#options RH_64BIT_SPRITE 258# enables fast scroll code appears to now work on 040 systems. 259#options RETINA_SPEED_HACK 260# enables the Hardwarecursor which does not work on some systems. 261#options RH_HARDWARECURSOR 262 263# wscons aware interface to amiga custom chips. 264# If you enable it enable also wskbd. 265# 266 267#amidisplaycc0 at mainbus0 # wscons interface to custom chips 268#wsdisplay0 at amidisplaycc0 console ? 269#options WSEMUL_VT100 270#options FONT_VT220L8x10 271#options FONT_VT220ISO8x16 272 273grfcc0 at mainbus0 # custom chips 274grfrt0 at zbus0 # retina II 275grfrh0 at zbus0 # retina III 276grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 277grful0 at zbus0 # A2410 278grfcv0 at zbus0 # CyberVision 64 279grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 280grfcv3d0 at zbus0 # CyberVision 64/3D 281 282grf0 at grfcc0 283grf1 at grfrt0 284grf2 at grfrh0 285grf3 at grfcl? 286grf4 at grful0 287grf5 at grfcv0 288grf6 at grfet? 289grf7 at grfcv3d0 290ite0 at grf0 # terminal emulators for grfs 291ite1 at grf1 # terminal emulators for grfs 292ite2 at grf2 # terminal emulators for grfs 293ite3 at grf3 # terminal emulators for grfs 294ite4 at grf4 # terminal emulators for grfs 295ite5 at grf5 # terminal emulators for grfs 296ite6 at grf6 # terminal emulators for grfs 297ite7 at grf7 # terminal emulators for grfs 298 299msc0 at zbus0 # A2232 MSC multiport serial. 300mfc0 at zbus0 # MultiFaceCard I/O board 301mfcs0 at mfc0 unit 0 # MFC serial 302mfcs1 at mfc0 unit 1 # MFC serial 303#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 304#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 305#mfcs2 at mfc1 unit 0 306#mfcs3 at mfc1 unit 1 307#mfcp1 at mfc1 unit 0 308 309hyper* at zbus? # zbus HyperCom3/3+/4/4+ 310#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 311com* at hyper? port ? # Hypercom3/4 serial ports 312lpt* at hyper? port ? # Hypercom3+/4+ parallel port 313 314#options IOBZCLOCK=22118400 # default, uncomment the next line 315#options IOBZCLOCK=24000000 # if needed. 316 317iobl* at zbus? # zbus IOBlix 318com* at iobl? port ? # IOBlix serial ports 319lpt* at iobl? port ? # IOBlix parallel ports 320 321 322# 323# Keyboard device. Optionally can attach a wskbd. 324# wskbd works together with a wsdisplay so enable them both if you will. 325# Don't enable wskbd if you use ite. 326# 327# XXX in std.amiga: kbd0 at mainbus0 328 329#wskbd0 at kbd0 console ? 330 331 332# 333# Amiga Mainboard devices (sans graphics and keyboard) 334# 335 336ser0 at mainbus0 # Amiga onboard serial 337par0 at mainbus0 # Amiga onboard parallel 338ms* at mainbus0 # Amiga mice 339fdc0 at mainbus0 # Amiga FDC 340fd* at fdc0 unit ? # floppy disks on the later 341a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 342a2kbbc0 at mainbus0 # A2000 battery backed clock 343aucc* at mainbus0 # Amiga CC audio 344audio* at aucc? 345 346 347#wsmouse* at ms? 348 349# 350# DraCo Mainboard devices (sans keyboard) 351# 352 353drbbc0 at mainbus0 # DraCo battery backed clock 354drsupio0 at mainbus0 # DraCo superio chip 355com* at drsupio? port ? # DraCo serial 356lpt0 at drsupio? port ? # DraCo parallel 357 358# 359# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 360# 361 362 363repulse* at zbus0 # ALiENDESiGN Repulse 364audio* at repulse? 365 366toccata* at zbus0 # MacroSystem GmbH Toccata 367audio* at toccata? 368 369# Ethernet cards: 370le* at zbus0 # A2065, Ameristar, Ariadne 371ne* at zbus0 # AriadneII, X-surf 372ed* at zbus0 # Hydra, ASDG LanRover 373es* at zbus0 # CEI A4066 EthernetPLUS 374qn* at zbus0 # Quicknet 375 376# Arcnet 377bah* at zbus0 # C=/Ameristar A2060 / 560 378 379# Greater Valley Product Bus 380gvpbus* at zbus0 381 382# scsi stuff, all possible 383gtsc0 at gvpbus? # GVP series II scsi 384scsibus* at gtsc0 385ahsc0 at mainbus0 # A3000 scsi 386scsibus* at ahsc0 387atzsc0 at zbus0 # A2091 scsi 388scsibus* at atzsc0 389wstsc0 at zbus0 # Wordsync II scsi 390scsibus* at wstsc0 391ivsc0 at zbus0 # IVS scsi 392scsibus* at ivsc0 393mlhsc0 at zbus0 # Hacker scsi 394scsibus* at mlhsc0 395otgsc0 at zbus0 # 12 gauge scsi 396scsibus* at otgsc0 397zssc0 at zbus0 # Zeus scsi 398scsibus* at zssc0 399mgnsc0 at zbus0 # Magnum scsi 400scsibus* at mgnsc0 401wesc0 at zbus0 # Warp Engine scsi 402scsibus* at wesc0 403afsc0 at zbus0 # A4091 scsi 404scsibus* at afsc0 405aftsc0 at mainbus0 # A4000T scsi 406scsibus* at aftsc0 407flsc0 at zbus0 # FastlaneZ3 scsi 408scsibus* at flsc0 409bzsc0 at zbus0 # Blizzard 1230 I,II scsi 410scsibus* at bzsc0 411bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 412scsibus* at bzivsc0 413bztzsc0 at zbus0 # Blizzard 2060 scsi 414scsibus* at bztzsc0 415cbsc0 at zbus0 # CyberSCSI I 416scsibus* at cbsc0 417cbiisc0 at zbus0 # CyberSCSI II 418scsibus* at cbiisc0 419cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 420scsibus* at cbiiisc0 421empsc0 at zbus0 # Emplant scsi 422scsibus* at empsc0 423 424wdc0 at mainbus0 # A4000 & A1200 IDE bus 425wdc* at zbus0 # Buddha / Catweasel 426 427atabus* at wdc? channel ? # ATA bus 428wd* at atabus? drive ? # + drives 429atapibus* at atabus? # ATAPI bus 430cd* at atapibus? drive ? # ATAPI CD-ROM drives 431sd* at atapibus? drive ? # ATAPI disk drives 432 433pccard0 at mainbus0 434pcmcia* at pccard0 435com* at pcmcia? function ? # Modems and serial cards 436pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 437aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 438wdc* at pcmcia? function ? 439awi* at pcmcia? function ? # BayStack 650 (802.11FH) 440ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 441mbe* at pcmcia? function ? # MB8696x based Ethernet 442ne* at pcmcia? function ? # NE2000-compatible Ethernet 443sm* at pcmcia? function ? # Megahertz Ethernet 444mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 445com* at mhzc? 446sm* at mhzc? 447 448 449drsc0 at mainbus0 # DraCo scsi 450scsibus* at drsc0 451 452 453# each hard drive from low target to high 454# will configure to the next available sd unit number 455sd* at scsibus? target ? lun ? # scsi disks 456st* at scsibus? target ? lun ? # scsi tapes 457cd* at scsibus? target ? lun ? # scsi cds 458ch* at scsibus? target ? lun ? # scsi autochangers 459ss* at scsibus? target ? lun ? # scsi scanner 460uk* at scsibus? target ? lun ? # scsi unknown 461 462# 463# accept filters 464pseudo-device accf_data # "dataready" accept filter 465pseudo-device accf_http # "httpready" accept filter 466 467pseudo-device loop # loopback network interface 468pseudo-device sl # SLIP network interfaces 469pseudo-device ppp # PPP network interfaces 470pseudo-device pppoe # PPP over Ethernet (RFC 2516) 471pseudo-device tun # network tunnel line discipline 472pseudo-device tap # virtual Ethernet 473#pseudo-device gre # generic L3 over IP tunnel 474pseudo-device bpfilter # Berkeley packet filter 475#pseudo-device carp # Common Address Redundancy Protocol 476pseudo-device ipfilter # IP Filter package 477pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 478#pseudo-device faith # IPv[46] tcp relay translation i/f 479pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 480pseudo-device vlan # IEEE 802.1q encapsulation 481pseudo-device bridge # simple inter-network bridging 482#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 483pseudo-device agr # IEEE 802.3ad link aggregation 484#pseudo-device pf # PF packet filter 485#pseudo-device pflog # PF log if 486pseudo-device fss # file system snapshot device 487 488pseudo-device view 4 # views (needed for grfcc) 489pseudo-device pty # pseudo-terminals 490pseudo-device clockctl # user control of clock subsystem 491 492#pseudo-device wsfont # wsfont(4) dynamic font loading support 493#pseudo-device wsmux # mouse & keyboard multiplexor 494 495pseudo-device vnd # vnode pseudo-disks 496#options VND_COMPRESSION # compressed vnd(4) 497pseudo-device ccd 4 # concatenated disk devices 498#pseudo-device cgd 4 # cryptographic disk devices 499pseudo-device raid 8 # RAIDframe disk driver 500options RAID_AUTOCONFIG # auto-configuration of RAID components 501# Options to enable various other RAIDframe RAID types. 502# options RF_INCLUDE_EVENODD=1 503# options RF_INCLUDE_RAID5_RS=1 504# options RF_INCLUDE_PARITYLOGGING=1 505# options RF_INCLUDE_CHAINDECLUSTER=1 506# options RF_INCLUDE_INTERDECLUSTER=1 507# options RF_INCLUDE_PARITY_DECLUSTERING=1 508# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 509 510pseudo-device rnd # /dev/random and in-kernel generator 511#options RND_COM # use "com" randomness as well (BROKEN) 512 513pseudo-device ksyms # /dev/ksyms (kernel symbols) 514pseudo-device nsmb # experimental - SMB requester 515 516# Veriexec 517# 518# a pseudo device needed for veriexec 519#pseudo-device veriexec 1 520# 521# Uncomment the fingerprint methods below that are desired. Note that 522# removing fingerprint methods will have almost no impact on the kernel 523# code size. 524# 525#options VERIFIED_EXEC_FP_RMD160 526#options VERIFIED_EXEC_FP_SHA256 527#options VERIFIED_EXEC_FP_SHA384 528#options VERIFIED_EXEC_FP_SHA512 529#options VERIFIED_EXEC_FP_SHA1 530#options VERIFIED_EXEC_FP_MD5 531 532config netbsd root on ? type ? 533