1# $NetBSD: GENERIC,v 1.252 2007/12/31 15:31:48 ad Exp $ 2# 3# This file was automatically created. 4# Changes will be lost when make is run in this directory. 5# 6# Created from: # NetBSD: GENERIC.in,v 1.62 2007/08/20 07:40:29 is Exp $ 7# 8# GENERIC machine description file 9# 10# This machine description file is used to generate the default NetBSD 11# kernel. The generic kernel does not include all options, subsystems 12# and device drivers, but should be useful for most applications. 13# 14# The machine description file can be customised for your specific 15# machine to reduce the kernel size and improve its performance. 16# 17# For further information on compiling NetBSD kernels, see the config(8) 18# man page. 19# 20# For further information on hardware support for this architecture, see 21# the intro(4) man page. For further information about kernel options 22# for this architecture, see the options(4) man page. For an explanation 23# of each device driver in this file see the section 4 man page for the 24# device. 25 26 27include "arch/amiga/conf/std.amiga" 28 29options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31#ident "GENERIC-$Revision: 1.252 $" 32 33 34maxusers 8 35options RTC_OFFSET=0 36 37# 38# mainboards to support (in addition to Amiga) 39# 40options DRACO 41options BB060STUPIDROM # You need this, if you have a non-DraCo 42 # MC68060 with an OS ROM up to (at least) 43 # V40 (OS3.1) and want to boot with the 44 # bootblock. 45 # You do not need this if you have a DraCo, 46 # have no 68060 or NEVER use the bootblock 47options P5PPC68KBOARD # Phase5 PPC/68K board support 48# 49# processors this kernel should support 50# 51options M68060 # support for 060 52options M060SP # MC68060 software support (Required for 060) 53options M68040 # support for 040 54options FPSP # MC68040 floating point support 55options M68030 # support for 030 56options M68020 # support for 020/851 57options FPU_EMULATE # FPU emulation 58 59# 60# Networking options 61# 62options INET # IP networking support (Required) 63options INET6 # IPV6 64#options IPSEC # IP security 65#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 66#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 67#options IPSEC_DEBUG # debug for IP security 68#options GATEWAY # Packet forwarding 69#options DIRECTED_BROADCAST # Broadcast across subnets 70 71#options MROUTING # Multicast routing 72#options PIM # Protocol Independent Multicast 73#options ISO,TPIP # OSI 74#options EON # OSI tunneling over IP 75options NETATALK # AppleTalk networking protocols 76#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 77 78options PPP_BSDCOMP # BSD-Compress compression support for PPP 79options PPP_DEFLATE # Deflate compression support for PPP 80options PPP_FILTER # Active filter support for PPP (requires bpf) 81options PFIL_HOOKS # pfil(9) packet filter hooks 82options IPFILTER_LOG # ipmon(8) log support 83options IPFILTER_LOOKUP # ippool(8) support 84#options IPFILTER_DEFAULT_BLOCK # block all packets by default 85 86#options ALTQ # Manipulate network interfaces' output queues 87#options ALTQ_BLUE # Stochastic Fair Blue 88#options ALTQ_CBQ # Class-Based Queueing 89#options ALTQ_CDNR # Diffserv Traffic Conditioner 90#options ALTQ_FIFOQ # First-In First-Out Queue 91#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 92#options ALTQ_HFSC # Hierarchical Fair Service Curve 93#options ALTQ_LOCALQ # Local queueing discipline 94#options ALTQ_PRIQ # Priority Queueing 95#options ALTQ_RED # Random Early Detection 96#options ALTQ_RIO # RED with IN/OUT 97#options ALTQ_WFQ # Weighted Fair Queueing 98 99# Filesystems 100file-system FFS # Berkeley fast file system 101file-system EXT2FS # second extended file system (linux) 102#file-system LFS # log-structured filesystem (experimental) 103 104file-system MFS # Memory based filesystem 105 106file-system NFS # Network File System client side code 107file-system ADOSFS # AmigaDOS file system 108file-system CD9660 # ISO 9660 + Rock Ridge filesystem 109file-system MSDOSFS # MS-DOS filesystem 110 111file-system KERNFS # kernel data-structure filesystem 112 113file-system FDESC # user file descriptor filesystem 114file-system NULLFS # loopback filesystem 115file-system OVERLAY # overlay filesystem 116#file-system PORTAL # Portal filesystem 117file-system PROCFS # /proc filesystem 118file-system UMAPFS # NULLFS + uid and gid remapping 119file-system UNION # union filesystem 120file-system SMBFS # experimental - CIFS; also needs nsmb (below) 121file-system PTYFS # /dev/pts/N support 122#file-system TMPFS # Efficient memory file-system 123#file-system UDF # experimental - OSTA UDF CD/DVD file-system 124 125# Filesystem options 126 127#options FFS_EI # FFS Endian Independant support 128 129options QUOTA # User and group quotas in FFS 130options SOFTDEP # FFS soft updates support. 131#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 132options NFSSERVER # Network File System server side code 133#options FFS_NO_SNAPSHOT # No FFS snapshot support 134 135#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 136 # immutable) behave as system flags. 137 138# 139# Compatibility options for various existing systems 140# 141 142#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 143options COMPAT_43 # compatibility with 4.3BSD interfaces 144options COMPAT_09 # compatibility with NetBSD 0.9 145options COMPAT_10 # compatibility with NetBSD 1.0 146options COMPAT_12 # compatibility with NetBSD 1.2 147options COMPAT_13 # compatibility with NetBSD 1.3 148options COMPAT_14 # compatibility with NetBSD 1.4 149options COMPAT_15 # compatibility with NetBSD 1.5 150options COMPAT_16 # compatibility with NetBSD 1.6 151options COMPAT_20 # compatibility with NetBSD 2.0 152options COMPAT_30 # NetBSD 3.0 compatibility. 153options COMPAT_40 # NetBSD 4.0 compatibility. 154options COMPAT_SUNOS # Support to run Sun (m68k) executables 155options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 156options COMPAT_NOMID # allow nonvalid machine id executables 157#options COMPAT_LINUX # Support to run Linux/m68k executables 158 159options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 160options COMPAT_AOUT_M68K # actually make some system calls work. 161options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 162 163# 164# Support for System V IPC facilities. 165# 166options SYSVSHM # System V-like shared memory 167options SYSVMSG # System V-like messages 168options SYSVSEM # System V-like semaphores 169#options SEMMNI=10 # number of semaphore identifiers 170#options SEMMNS=60 # number of semaphores in system 171#options SEMUME=10 # max number of undo entries per process 172#options SEMMNU=30 # number of undo structures in system 173options P1003_1B_SEMAPHORE # p1003.1b semaphore support 174 175# 176# Support for various kernel options 177# 178 179options KTRACE # system call tracing support 180options LKM # Loadable kernel modules 181#options INSECURE # disable kernel security levels 182options SCSIVERBOSE # human readable SCSI error messages 183options USERCONF # userconf(4) support 184options NTP # NTP phase/frequency locked loop 185#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 186 187# Enable experimental buffer queue strategy for better responsiveness under 188# high disk I/O load. Use it with caution - it's not proven to be stable yet. 189#options BUFQ_READPRIO 190#options BUFQ_PRIOCSCAN 191 192# 193# Misc. debugging options 194# 195options DDB # Kernel debugger 196#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 197#options DIAGNOSTIC # Extra kernel sanity checks 198#options DEBUG # Enable misc. kernel debugging code 199#options SYSCALL_DEBUG # debug all syscalls. 200#options SCSIDEBUG # Add SCSI debugging statements 201#options PANICBUTTON # Forced crash via keypress (?) 202 203# 204# Amiga specific options 205# 206#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 207 # first bank of RAM. (default: unlimited) 208#options NKPTADD=4 # set this for 4 additional KPT pages 209#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 210 # per 16 MB (1<<24 bytes) of RAM 211 # uncomment and decrease this, or uncomment and 212 # increase NKPTADD if you get "out of PT pages" 213 # panics. 214 215# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 216# before the 10 secondinterval ends, or that KBDRESET does work at all. 217#options KBDRESET # sync on Ctrl-Amiga-Amiga 218 219# These options improve performance with the built-in serial port 220# on slower Amigas. Try the larger buffers first then lev6_defer. 221#options SERIBUF_SIZE=4096 222#options SEROBUF_SIZE=32 223#options LEV6_DEFER # defers l6 to l4 (below serial l5) 224 225#options DEVRELOAD # implement /dev/reload 226# # currently only works for a.out kernels 227 228options RETINACONSOLE # enable code to allow retina to be console 229options ULOWELLCONSOLE # enable code to allow a2410 to be console 230options CL5426CONSOLE # Cirrus console 231options CV64CONSOLE # CyberVision console 232options TSENGCONSOLE # Tseng console 233options CV3DCONSOLE # CyberVision 64/3D console 234 235options GRF_ECS # Enhanced Chip Set 236options GRF_NTSC # NTSC 237options GRF_PAL # PAL 238options GRF_A2024 # Support for the A2024 239options GRF_AGA # AGA Chip Set 240options GRF_AGA_VGA # AGA VGAONLY timing 241options GRF_SUPER72 # AGA Super-72 242#options KFONT_8X11 # 8x11 font 243 244# select a font for the console according to the character set and keymap 245# you want to use 246options KFONT_CONS_ISO8859_1 247#options KFONT_CONS_ISO8859_2 248 249# This is how you would tell the kernel the A2410 oscillator frequencies: 250# The used frequencies are the defaults, and do not need option setting 251#options ULOWELL_OSC1=36000000 252#options ULOWELL_OSC2=66667000 253 254# This is how you specify the blitting speed, higher values may speed up blits 255# a littel bit. If you raise this value too much some trash may appear. 256# the commented version is the default. 257#options RH_MEMCLK=61000000 258# this option enables the 64 bit sprite which does not work 259# for quite a few people. E.g. The cursor sprite will turn to a block 260# when moved to the top of the screen in X. 261#options RH_64BIT_SPRITE 262# enables fast scroll code appears to now work on 040 systems. 263#options RETINA_SPEED_HACK 264# enables the Hardwarecursor which does not work on some systems. 265#options RH_HARDWARECURSOR 266 267# wscons aware interface to amiga custom chips. 268# If you enable it enable also wskbd. 269# 270 271#amidisplaycc0 at mainbus0 # wscons interface to custom chips 272#wsdisplay0 at amidisplaycc0 console ? 273#options WSEMUL_VT100 274#options FONT_VT220L8x10 275#options FONT_VT220ISO8x16 276 277grfcc0 at mainbus0 # custom chips 278grfrt0 at zbus0 # retina II 279grfrh0 at zbus0 # retina III 280grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 281grful0 at zbus0 # A2410 282grfcv0 at zbus0 # CyberVision 64 283grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 284grfcv3d0 at zbus0 # CyberVision 64/3D 285 286grf0 at grfcc0 287grf1 at grfrt0 288grf2 at grfrh0 289grf3 at grfcl? 290grf4 at grful0 291grf5 at grfcv0 292grf6 at grfet? 293grf7 at grfcv3d0 294ite0 at grf0 # terminal emulators for grfs 295ite1 at grf1 # terminal emulators for grfs 296ite2 at grf2 # terminal emulators for grfs 297ite3 at grf3 # terminal emulators for grfs 298ite4 at grf4 # terminal emulators for grfs 299ite5 at grf5 # terminal emulators for grfs 300ite6 at grf6 # terminal emulators for grfs 301ite7 at grf7 # terminal emulators for grfs 302 303msc0 at zbus0 # A2232 MSC multiport serial. 304mfc0 at zbus0 # MultiFaceCard I/O board 305mfcs0 at mfc0 unit 0 # MFC serial 306mfcs1 at mfc0 unit 1 # MFC serial 307#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 308#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 309#mfcs2 at mfc1 unit 0 310#mfcs3 at mfc1 unit 1 311#mfcp1 at mfc1 unit 0 312 313hyper* at zbus? # zbus HyperCom3/3+/4/4+ 314#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 315com* at hyper? port ? # Hypercom3/4 serial ports 316lpt* at hyper? port ? # Hypercom3+/4+ parallel port 317 318#options IOBZCLOCK=22118400 # default, uncomment the next line 319#options IOBZCLOCK=24000000 # if needed. 320 321iobl* at zbus? # zbus IOBlix 322com* at iobl? port ? # IOBlix serial ports 323lpt* at iobl? port ? # IOBlix parallel ports 324 325 326# 327# Keyboard device. Optionally can attach a wskbd. 328# wskbd works together with a wsdisplay so enable them both if you will. 329# Don't enable wskbd if you use ite. 330# 331# XXX in std.amiga: kbd0 at mainbus0 332 333#wskbd0 at kbd0 console ? 334 335 336# 337# Amiga Mainboard devices (sans graphics and keyboard) 338# 339 340ser0 at mainbus0 # Amiga onboard serial 341par0 at mainbus0 # Amiga onboard parallel 342ms* at mainbus0 # Amiga mice 343fdc0 at mainbus0 # Amiga FDC 344fd* at fdc0 unit ? # floppy disks on the later 345a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 346a2kbbc0 at mainbus0 # A2000 battery backed clock 347aucc* at mainbus0 # Amiga CC audio 348audio* at aucc? 349 350 351#wsmouse* at ms? 352 353# 354# DraCo Mainboard devices (sans keyboard) 355# 356 357drbbc0 at mainbus0 # DraCo battery backed clock 358drsupio0 at mainbus0 # DraCo superio chip 359com* at drsupio? port ? # DraCo serial 360lpt0 at drsupio? port ? # DraCo parallel 361 362# 363# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 364# 365 366 367repulse* at zbus0 # ALiENDESiGN Repulse 368audio* at repulse? 369 370toccata* at zbus0 # MacroSystem GmbH Toccata 371audio* at toccata? 372 373# Ethernet cards: 374le* at zbus0 # A2065, Ameristar, Ariadne 375ne* at zbus0 # AriadneII, X-surf 376ed* at zbus0 # Hydra, ASDG LanRover 377es* at zbus0 # CEI A4066 EthernetPLUS 378qn* at zbus0 # Quicknet 379 380# Arcnet 381bah* at zbus0 # C=/Ameristar A2060 / 560 382 383# Greater Valley Product Bus 384gvpbus* at zbus0 385 386# scsi stuff, all possible 387gtsc0 at gvpbus? # GVP series II scsi 388scsibus* at gtsc0 389ahsc0 at mainbus0 # A3000 scsi 390scsibus* at ahsc0 391atzsc0 at zbus0 # A2091 scsi 392scsibus* at atzsc0 393wstsc0 at zbus0 # Wordsync II scsi 394scsibus* at wstsc0 395ivsc0 at zbus0 # IVS scsi 396scsibus* at ivsc0 397mlhsc0 at zbus0 # Hacker scsi 398scsibus* at mlhsc0 399otgsc0 at zbus0 # 12 gauge scsi 400scsibus* at otgsc0 401zssc0 at zbus0 # Zeus scsi 402scsibus* at zssc0 403mgnsc0 at zbus0 # Magnum scsi 404scsibus* at mgnsc0 405wesc0 at zbus0 # Warp Engine scsi 406scsibus* at wesc0 407afsc0 at zbus0 # A4091 scsi 408scsibus* at afsc0 409aftsc0 at mainbus0 # A4000T scsi 410scsibus* at aftsc0 411flsc0 at zbus0 # FastlaneZ3 scsi 412scsibus* at flsc0 413bzsc0 at zbus0 # Blizzard 1230 I,II scsi 414scsibus* at bzsc0 415bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 416scsibus* at bzivsc0 417bztzsc0 at zbus0 # Blizzard 2060 scsi 418scsibus* at bztzsc0 419cbsc0 at zbus0 # CyberSCSI I 420scsibus* at cbsc0 421cbiisc0 at zbus0 # CyberSCSI II 422scsibus* at cbiisc0 423cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 424scsibus* at cbiiisc0 425empsc0 at zbus0 # Emplant scsi 426scsibus* at empsc0 427 428wdc0 at mainbus0 # A4000 & A1200 IDE bus 429wdc* at zbus0 # Buddha / Catweasel 430 431atabus* at wdc? channel ? # ATA bus 432wd* at atabus? drive ? # + drives 433atapibus* at atabus? # ATAPI bus 434cd* at atapibus? drive ? # ATAPI CD-ROM drives 435sd* at atapibus? drive ? # ATAPI disk drives 436 437pccard0 at mainbus0 438pcmcia* at pccard0 439com* at pcmcia? function ? # Modems and serial cards 440pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 441aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 442wdc* at pcmcia? function ? 443awi* at pcmcia? function ? # BayStack 650 (802.11FH) 444ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 445mbe* at pcmcia? function ? # MB8696x based Ethernet 446ne* at pcmcia? function ? # NE2000-compatible Ethernet 447sm* at pcmcia? function ? # Megahertz Ethernet 448mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 449com* at mhzc? 450sm* at mhzc? 451 452 453drsc0 at mainbus0 # DraCo scsi 454scsibus* at drsc0 455 456 457# each hard drive from low target to high 458# will configure to the next available sd unit number 459sd* at scsibus? target ? lun ? # scsi disks 460st* at scsibus? target ? lun ? # scsi tapes 461cd* at scsibus? target ? lun ? # scsi cds 462ch* at scsibus? target ? lun ? # scsi autochangers 463ss* at scsibus? target ? lun ? # scsi scanner 464uk* at scsibus? target ? lun ? # scsi unknown 465 466pseudo-device loop # loopback network interface 467pseudo-device sl # SLIP network interfaces 468pseudo-device ppp # PPP network interfaces 469pseudo-device pppoe # PPP over Ethernet (RFC 2516) 470pseudo-device tun # network tunnel line discipline 471pseudo-device tap # virtual Ethernet 472#pseudo-device gre # generic L3 over IP tunnel 473pseudo-device bpfilter # Berkeley packet filter 474#pseudo-device carp # Common Address Redundancy Protocol 475pseudo-device ipfilter # IP Filter package 476pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 477#pseudo-device faith # IPv[46] tcp relay translation i/f 478pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 479pseudo-device vlan # IEEE 802.1q encapsulation 480pseudo-device bridge # simple inter-network bridging 481#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 482pseudo-device agr # IEEE 802.3ad link aggregation 483#pseudo-device pf # PF packet filter 484#pseudo-device pflog # PF log if 485pseudo-device fss 4 # file system snapshot device 486 487pseudo-device view 4 # views (needed for grfcc) 488pseudo-device pty # pseudo-terminals 489pseudo-device clockctl # user control of clock subsystem 490 491#pseudo-device wsfont # wsfont(4) dynamic font loading support 492#pseudo-device wsmux # mouse & keyboard multiplexor 493 494pseudo-device vnd # vnode pseudo-disks 495#options VND_COMPRESSION # compressed vnd(4) 496pseudo-device ccd 4 # concatenated disk devices 497#pseudo-device cgd 4 # cryptographic disk devices 498pseudo-device raid 8 # RAIDframe disk driver 499options RAID_AUTOCONFIG # auto-configuration of RAID components 500# Options to enable various other RAIDframe RAID types. 501# options RF_INCLUDE_EVENODD=1 502# options RF_INCLUDE_RAID5_RS=1 503# options RF_INCLUDE_PARITYLOGGING=1 504# options RF_INCLUDE_CHAINDECLUSTER=1 505# options RF_INCLUDE_INTERDECLUSTER=1 506# options RF_INCLUDE_PARITY_DECLUSTERING=1 507# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 508 509pseudo-device rnd # /dev/random and in-kernel generator 510#options RND_COM # use "com" randomness as well (BROKEN) 511 512pseudo-device ksyms # /dev/ksyms (kernel symbols) 513pseudo-device nsmb # experimental - SMB requester 514 515# Veriexec 516# 517# a pseudo device needed for veriexec 518#pseudo-device veriexec 1 519# 520# Uncomment the fingerprint methods below that are desired. Note that 521# removing fingerprint methods will have almost no impact on the kernel 522# code size. 523# 524#options VERIFIED_EXEC_FP_RMD160 525#options VERIFIED_EXEC_FP_SHA256 526#options VERIFIED_EXEC_FP_SHA384 527#options VERIFIED_EXEC_FP_SHA512 528#options VERIFIED_EXEC_FP_SHA1 529#options VERIFIED_EXEC_FP_MD5 530 531config netbsd root on ? type ? 532