1 /* $NetBSD: dwlpx.c,v 1.17 1998/06/06 23:11:52 thorpej Exp $ */ 2 3 /* 4 * Copyright (c) 1997 by Matthew Jacob 5 * NASA AMES Research Center. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice immediately at the beginning of the file, without modification, 13 * this list of conditions, and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. The name of the author may not be used to endorse or promote products 18 * derived from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 24 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30 * SUCH DAMAGE. 31 */ 32 33 #include <sys/cdefs.h> /* RCS ID & Copyright macro defns */ 34 35 __KERNEL_RCSID(0, "$NetBSD: dwlpx.c,v 1.17 1998/06/06 23:11:52 thorpej Exp $"); 36 37 #include <sys/param.h> 38 #include <sys/systm.h> 39 #include <sys/kernel.h> 40 #include <sys/device.h> 41 42 #include <vm/vm.h> 43 44 #include <machine/autoconf.h> 45 46 #include <dev/pci/pcireg.h> 47 #include <dev/pci/pcivar.h> 48 49 #include <alpha/tlsb/tlsbreg.h> 50 #include <alpha/tlsb/kftxxvar.h> 51 #include <alpha/tlsb/kftxxreg.h> 52 #include <alpha/pci/dwlpxreg.h> 53 #include <alpha/pci/dwlpxvar.h> 54 #include <alpha/pci/pci_kn8ae.h> 55 56 #define KV(_addr) ((caddr_t)ALPHA_PHYS_TO_K0SEG((_addr))) 57 #define DWLPX_SYSBASE(sc) \ 58 ((((unsigned long)((sc)->dwlpx_node - 4)) << 36) | \ 59 (((unsigned long) (sc)->dwlpx_hosenum) << 34) | \ 60 (1LL << 39)) 61 62 63 static int dwlpxmatch __P((struct device *, struct cfdata *, void *)); 64 static void dwlpxattach __P((struct device *, struct device *, void *)); 65 struct cfattach dwlpx_ca = { 66 sizeof(struct dwlpx_softc), dwlpxmatch, dwlpxattach 67 }; 68 69 extern struct cfdriver dwlpx_cd; 70 71 static int dwlpxprint __P((void *, const char *)); 72 static struct dwlpx_softc *dwlps[DWLPX_NIONODE][DWLPX_NHOSE]; 73 74 static int 75 dwlpxprint(aux, pnp) 76 void *aux; 77 const char *pnp; 78 { 79 register struct pcibus_attach_args *pba = aux; 80 /* only PCIs can attach to DWLPX's; easy. */ 81 if (pnp) 82 printf("%s at %s", pba->pba_busname, pnp); 83 printf(" bus %d", pba->pba_bus); 84 return (UNCONF); 85 } 86 87 static int 88 dwlpxmatch(parent, cf, aux) 89 struct device *parent; 90 struct cfdata *cf; 91 void *aux; 92 { 93 struct kft_dev_attach_args *ka = aux; 94 95 if (strcmp(ka->ka_name, dwlpx_cd.cd_name) != 0) 96 return (0); 97 return (1); 98 } 99 100 static void 101 dwlpxattach(parent, self, aux) 102 struct device *parent; 103 struct device *self; 104 void *aux; 105 { 106 static int once = 0; 107 struct dwlpx_softc *sc = (struct dwlpx_softc *)self; 108 struct dwlpx_config *ccp = &sc->dwlpx_cc; 109 struct kft_dev_attach_args *ka = aux; 110 struct pcibus_attach_args pba; 111 u_int32_t pcia_present; 112 113 sc->dwlpx_node = ka->ka_node; 114 sc->dwlpx_dtype = ka->ka_dtype; 115 sc->dwlpx_hosenum = ka->ka_hosenum; 116 dwlps[sc->dwlpx_node - 4][sc->dwlpx_hosenum] = sc; 117 dwlpx_init(sc); 118 dwlpx_dma_init(ccp); 119 120 pcia_present = REGVAL(PCIA_PRESENT + ccp->cc_sysbase); 121 printf(": PCIA rev. %d, STD I/O %spresent, %dK S/G entries\n", 122 (pcia_present >> PCIA_PRESENT_REVSHIFT) & PCIA_PRESENT_REVMASK, 123 (pcia_present & PCIA_PRESENT_STDIO) == 0 ? "not " : "", 124 sc->dwlpx_sgmapsz == DWLPX_SG128K ? 128 : 32); 125 126 #if 0 127 { 128 int hpc, slot, slotval; 129 const char *str; 130 for (hpc = 0; hpc < sc->dwlpx_nhpc; hpc++) { 131 for (slot = 0; slot < 4; slot++) { 132 slotval = (pcia_present >> 133 PCIA_PRESENT_SLOTSHIFT(hpc, slot)) & 134 PCIA_PRESENT_SLOT_MASK; 135 if (slotval == PCIA_PRESENT_SLOT_NONE) 136 continue; 137 switch (slotval) { 138 case PCIA_PRESENT_SLOT_25W: 139 str = "25"; 140 break; 141 case PCIA_PRESENT_SLOT_15W: 142 str = "15"; 143 break; 144 case PCIA_PRESENT_SLOW_7W: 145 default: /* XXX gcc */ 146 str = "7.5"; 147 break; 148 } 149 printf("%s: hpc %d slot %d: %s watt module\n", 150 sc->dwlpx_dev.dv_xname, hpc, slot, str); 151 } 152 } 153 } 154 #endif 155 156 if (once == 0) { 157 /* 158 * Set up interrupts 159 */ 160 pci_kn8ae_pickintr(&sc->dwlpx_cc, 1); 161 #ifdef EVCNT_COUNTERS 162 evcnt_attach(self, "intr", kn8ae_intr_evcnt); 163 #endif 164 once++; 165 } else { 166 pci_kn8ae_pickintr(&sc->dwlpx_cc, 0); 167 } 168 169 /* 170 * Attach PCI bus 171 */ 172 pba.pba_busname = "pci"; 173 pba.pba_iot = &sc->dwlpx_cc.cc_iot; 174 pba.pba_memt = &sc->dwlpx_cc.cc_memt; 175 pba.pba_dmat = /* start with direct, may change... */ 176 alphabus_dma_get_tag(&sc->dwlpx_cc.cc_dmat_direct, ALPHA_BUS_PCI); 177 pba.pba_pc = &sc->dwlpx_cc.cc_pc; 178 pba.pba_bus = 0; 179 pba.pba_flags = PCI_FLAGS_IO_ENABLED | PCI_FLAGS_MEM_ENABLED; 180 config_found(self, &pba, dwlpxprint); 181 } 182 183 void 184 dwlpx_init(sc) 185 struct dwlpx_softc *sc; 186 { 187 int i; 188 u_int32_t ctl; 189 struct dwlpx_config *ccp = &sc->dwlpx_cc; 190 unsigned long ls = DWLPX_SYSBASE(sc); 191 192 if (ccp->cc_initted == 0) { 193 /* 194 * On reads, you get a fault if you read a nonexisted HPC. 195 * We know the internal KFTIA hose (hose 0) has only 2 HPCs, 196 * but we can also actually probe for HPCs. 197 * Assume at least one. 198 */ 199 for (sc->dwlpx_nhpc = 1; sc->dwlpx_nhpc < NHPC; 200 sc->dwlpx_nhpc++) { 201 if (badaddr(KV(PCIA_CTL(sc->dwlpx_nhpc) + ls), 202 sizeof (ctl)) != 0) { 203 break; 204 } 205 } 206 if (sc->dwlpx_nhpc != NHPC) { 207 /* clear (potential) Illegal CSR Address Error */ 208 REGVAL(PCIA_ERR(0) + DWLPX_SYSBASE(sc)) = 209 PCIA_ERR_ALLERR; 210 } 211 212 dwlpx_bus_io_init(&ccp->cc_iot, ccp); 213 dwlpx_bus_mem_init(&ccp->cc_memt, ccp); 214 } 215 dwlpx_pci_init(&ccp->cc_pc, ccp); 216 ccp->cc_sc = sc; 217 218 /* 219 * Establish a precalculated base for convenience's sake. 220 */ 221 ccp->cc_sysbase = ls; 222 223 /* 224 * If there are only 2 HPCs, then the 'present' register is not 225 * implemented, so there will only ever be 32K SG entries. Otherwise 226 * any revision greater than zero will have 128K entries. 227 */ 228 ctl = REGVAL(PCIA_PRESENT + ccp->cc_sysbase); 229 if (sc->dwlpx_nhpc == 2) { 230 sc->dwlpx_sgmapsz = DWLPX_SG32K; 231 #if 0 232 /* 233 * As of 2/25/98- When I enable SG128K, and then have to flip 234 * TBIT below, I get bad SGRAM errors. We'll fix this later 235 * if this gets important. 236 */ 237 } else if ((ctl >> PCIA_PRESENT_REVSHIFT) & PCIA_PRESENT_REVMASK) { 238 sc->dwlpx_sgmapsz = DWLPX_SG128K; 239 #endif 240 } else { 241 sc->dwlpx_sgmapsz = DWLPX_SG32K; 242 } 243 244 /* 245 * Set up interrupt stuff for this DWLPX. 246 * 247 * Note that all PCI interrupt pins are disabled at this time. 248 * 249 * Do this even for all HPCs- even for the nonexistent 250 * one on hose zero of a KFTIA. 251 */ 252 for (i = 0; i < NHPC; i++) { 253 REGVAL(PCIA_IMASK(i) + ccp->cc_sysbase) = DWLPX_IMASK_DFLT; 254 REGVAL(PCIA_ERRVEC(i) + ccp->cc_sysbase) = 255 DWLPX_ERRVEC((sc->dwlpx_node - 4), sc->dwlpx_hosenum); 256 } 257 for (i = 0; i < DWLPX_MAXDEV; i++) { 258 u_int16_t vec; 259 int ss, hpc; 260 261 vec = DWLPX_MVEC((sc->dwlpx_node - 4), sc->dwlpx_hosenum, i); 262 ss = i; 263 if (i < 4) { 264 hpc = 0; 265 } else if (i < 8) { 266 ss -= 4; 267 hpc = 1; 268 } else { 269 ss -= 8; 270 hpc = 2; 271 } 272 REGVAL(PCIA_DEVVEC(hpc, ss, 1) + ccp->cc_sysbase) = vec; 273 REGVAL(PCIA_DEVVEC(hpc, ss, 2) + ccp->cc_sysbase) = vec; 274 REGVAL(PCIA_DEVVEC(hpc, ss, 3) + ccp->cc_sysbase) = vec; 275 REGVAL(PCIA_DEVVEC(hpc, ss, 4) + ccp->cc_sysbase) = vec; 276 } 277 /* 278 * Establish HAE values, as well as make sure of sanity elsewhere. 279 */ 280 for (i = 0; i < sc->dwlpx_nhpc; i++) { 281 ctl = REGVAL(PCIA_CTL(i) + ccp->cc_sysbase); 282 ctl &= 0x0fffffff; 283 ctl &= ~(PCIA_CTL_MHAE(0x1f) | PCIA_CTL_IHAE(0x1f)); 284 /* 285 * I originally also had it or'ing in 3, which makes no sense. 286 */ 287 288 ctl |= PCIA_CTL_RMMENA | PCIA_CTL_RMMARB; 289 290 /* 291 * Only valid if we're attached to a KFTIA or a KTHA. 292 */ 293 ctl |= PCIA_CTL_3UP; 294 295 ctl |= PCIA_CTL_CUTENA; 296 297 /* 298 * Fit in appropriate S/G Map Ram size. 299 */ 300 if (sc->dwlpx_sgmapsz == DWLPX_SG32K) 301 ctl |= PCIA_CTL_SG32K; 302 else if (sc->dwlpx_sgmapsz == DWLPX_SG128K) 303 ctl |= PCIA_CTL_SG128K; 304 else 305 ctl |= PCIA_CTL_SG32K; 306 307 REGVAL(PCIA_CTL(i) + ccp->cc_sysbase) = ctl; 308 } 309 /* 310 * Enable TBIT if required 311 */ 312 if (sc->dwlpx_sgmapsz == DWLPX_SG128K) 313 REGVAL(PCIA_TBIT + ccp->cc_sysbase) = 1; 314 alpha_mb(); 315 ccp->cc_initted = 1; 316 } 317 318 void 319 dwlpx_iointr(framep, vec) 320 void *framep; 321 unsigned long vec; 322 { 323 struct dwlpx_softc *sc; 324 struct dwlpx_config *ccp; 325 int ionode, hosenum, i; 326 struct { 327 u_int32_t err; 328 u_int32_t addr; 329 } hpcs[NHPC]; 330 331 ionode = (vec >> 8) & 0xf; 332 hosenum = (vec >> 4) & 0x7; 333 if (ionode >= DWLPX_NIONODE || hosenum >= DWLPX_NHOSE) { 334 panic("dwlpx_iointr: mangled vector %x", vec); 335 /* NOTREACHED */ 336 } 337 sc = dwlps[ionode][hosenum]; 338 ccp = &sc->dwlpx_cc; 339 for (i = 0; i < sc->dwlpx_nhpc; i++) { 340 hpcs[i].err = REGVAL(PCIA_ERR(i) + ccp->cc_sysbase); 341 hpcs[i].addr = REGVAL(PCIA_FADR(i) + ccp->cc_sysbase); 342 } 343 printf("%s: node %d hose %d error interrupt\n", 344 sc->dwlpx_dev.dv_xname, ionode + 4, hosenum); 345 346 for (i = 0; i < sc->dwlpx_nhpc; i++) { 347 if ((hpcs[i].err & PCIA_ERR_ERROR) == 0) 348 continue; 349 printf("\tHPC %d: ERR=0x%08x; DMA %s Memory, " 350 "Failing Address 0x%x\n", 351 i, hpcs[i].err, hpcs[i].addr & 0x1? "write to" : 352 "read from", hpcs[i].addr & ~3); 353 if (hpcs[i].err & PCIA_ERR_SERR_L) 354 printf("\t PCI device asserted SERR_L\n"); 355 if (hpcs[i].err & PCIA_ERR_ILAT) 356 printf("\t Incremental Latency Exceeded\n"); 357 if (hpcs[i].err & PCIA_ERR_SGPRTY) 358 printf("\t CPU access of SG RAM Parity Error\n"); 359 if (hpcs[i].err & PCIA_ERR_ILLCSR) 360 printf("\t Illegal CSR Address Error\n"); 361 if (hpcs[i].err & PCIA_ERR_PCINXM) 362 printf("\t Nonexistent PCI Address Error\n"); 363 if (hpcs[i].err & PCIA_ERR_DSCERR) 364 printf("\t PCI Target Disconnect Error\n"); 365 if (hpcs[i].err & PCIA_ERR_ABRT) 366 printf("\t PCI Target Abort Error\n"); 367 if (hpcs[i].err & PCIA_ERR_WPRTY) 368 printf("\t PCI Write Parity Error\n"); 369 if (hpcs[i].err & PCIA_ERR_DPERR) 370 printf("\t PCI Data Parity Error\n"); 371 if (hpcs[i].err & PCIA_ERR_APERR) 372 printf("\t PCI Address Parity Error\n"); 373 if (hpcs[i].err & PCIA_ERR_DFLT) 374 printf("\t SG Map RAM Invalid Entry Error\n"); 375 if (hpcs[i].err & PCIA_ERR_DPRTY) 376 printf("\t DMA access of SG RAM Parity Error\n"); 377 if (hpcs[i].err & PCIA_ERR_DRPERR) 378 printf("\t DMA Read Return Parity Error\n"); 379 if (hpcs[i].err & PCIA_ERR_MABRT) 380 printf("\t PCI Master Abort Error\n"); 381 if (hpcs[i].err & PCIA_ERR_CPRTY) 382 printf("\t CSR Parity Error\n"); 383 if (hpcs[i].err & PCIA_ERR_COVR) 384 printf("\t CSR Overrun Error\n"); 385 if (hpcs[i].err & PCIA_ERR_MBPERR) 386 printf("\t Mailbox Parity Error\n"); 387 if (hpcs[i].err & PCIA_ERR_MBILI) 388 printf("\t Mailbox Illegal Length Error\n"); 389 REGVAL(PCIA_ERR(i) + ccp->cc_sysbase) = hpcs[i].err; 390 } 391 } 392