1 /* $NetBSD: amps.c,v 1.2 2001/11/27 00:53:12 thorpej Exp $ */ 2 3 /*- 4 * Copyright (c) 1997 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Mark Brinicombe of Causality Limited. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. All advertising materials mentioning features or use of this software 19 * must display the following acknowledgement: 20 * This product includes software developed by the NetBSD 21 * Foundation, Inc. and its contributors. 22 * 4. Neither the name of The NetBSD Foundation nor the names of its 23 * contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 27 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 28 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 30 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 31 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 34 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 36 * POSSIBILITY OF SUCH DAMAGE. 37 * 38 * Card driver and probe and attach functions to use generic 16550 com 39 * driver for the Atomwide multiport serial podule 40 */ 41 42 /* 43 * Thanks to Martin Coulson, Atomwide, for providing the hardware 44 */ 45 46 #include <sys/param.h> 47 #include <sys/systm.h> 48 #include <sys/ioctl.h> 49 #include <sys/select.h> 50 #include <sys/tty.h> 51 #include <sys/proc.h> 52 #include <sys/user.h> 53 #include <sys/conf.h> 54 #include <sys/file.h> 55 #include <sys/uio.h> 56 #include <sys/kernel.h> 57 #include <sys/syslog.h> 58 #include <sys/types.h> 59 #include <sys/device.h> 60 61 #include <machine/intr.h> 62 #include <machine/io.h> 63 #include <machine/bus.h> 64 #include <acorn32/podulebus/podulebus.h> 65 #include <acorn32/podulebus/ampsreg.h> 66 #include <dev/ic/comreg.h> 67 #include <dev/ic/comvar.h> 68 #include <dev/podulebus/podules.h> 69 70 #include "locators.h" 71 72 /* 73 * Atomwide Mulit-port serial podule device. 74 * 75 * This probes and attaches the top level multi-port serial device to the 76 * podulebus. It then configures the child com devices. 77 */ 78 79 /* 80 * Atomwide Multi-port serial card softc structure. 81 * 82 * Contains the device node, podule information and global information 83 * required by the driver such as the card version and the interrupt mask. 84 */ 85 86 struct amps_softc { 87 struct device sc_dev; /* device node */ 88 podule_t *sc_podule; /* Our podule info */ 89 int sc_podule_number; /* Our podule number */ 90 bus_space_tag_t sc_iot; /* Bus tag */ 91 }; 92 93 int amps_probe __P((struct device *, struct cfdata *, void *)); 94 void amps_attach __P((struct device *, struct device *, void *)); 95 void amps_shutdown __P((void *arg)); 96 97 struct cfattach amps_ca = { 98 sizeof(struct amps_softc), amps_probe, amps_attach 99 }; 100 101 /* 102 * Attach arguments for child devices. 103 * Pass the podule details, the parent softc and the channel 104 */ 105 106 struct amps_attach_args { 107 bus_space_tag_t aa_iot; /* bus space tag */ 108 unsigned int aa_base; /* base address for port */ 109 int aa_port; /* serial port number */ 110 podulebus_intr_handle_t aa_irq; /* IRQ number */ 111 }; 112 113 /* 114 * Define prototypes for custom bus space functions. 115 */ 116 117 /* Print function used during child config */ 118 119 int 120 amps_print(aux, name) 121 void *aux; 122 const char *name; 123 { 124 struct amps_attach_args *aa = aux; 125 126 if (!name) 127 printf(", port %d", aa->aa_port); 128 129 return(QUIET); 130 } 131 132 /* 133 * Card probe function 134 * 135 * Just match the manufacturer and podule ID's 136 */ 137 138 int 139 amps_probe(parent, cf, aux) 140 struct device *parent; 141 struct cfdata *cf; 142 void *aux; 143 { 144 struct podule_attach_args *pa = (void *)aux; 145 146 if (matchpodule(pa, MANUFACTURER_ATOMWIDE2, PODULE_ATOMWIDE2_SERIAL, -1) == 0) 147 return(0); 148 return(1); 149 } 150 151 /* 152 * Card attach function 153 * 154 * Identify the card version and configure any children. 155 * Install a shutdown handler to kill interrupts on shutdown 156 */ 157 158 void 159 amps_attach(parent, self, aux) 160 struct device *parent, *self; 161 void *aux; 162 { 163 struct amps_softc *sc = (void *)self; 164 struct podule_attach_args *pa = (void *)aux; 165 struct amps_attach_args aa; 166 167 /* Note the podule number and validate */ 168 169 if (pa->pa_podule_number == -1) 170 panic("Podule has disappeared !"); 171 172 sc->sc_podule_number = pa->pa_podule_number; 173 sc->sc_podule = pa->pa_podule; 174 podules[sc->sc_podule_number].attached = 1; 175 176 sc->sc_iot = pa->pa_iot; 177 178 /* Install a clean up handler to make sure IRQ's are disabled */ 179 /* if (shutdownhook_establish(amps_shutdown, (void *)sc) == NULL) 180 panic("%s: Cannot install shutdown handler", self->dv_xname);*/ 181 182 /* Set the interrupt info for this podule */ 183 184 /* sc->sc_podule->irq_addr = pa->pa_podule->slow_base +;*/ /* XXX */ 185 /* sc->sc_podule->irq_mask = ;*/ 186 187 printf("\n"); 188 189 /* Configure the children */ 190 191 aa.aa_iot = sc->sc_iot; 192 aa.aa_base = pa->pa_podule->slow_base + AMPS_BASE_OFFSET; 193 aa.aa_base += MAX_AMPS_PORTS * AMPS_PORT_SPACING; 194 aa.aa_irq = pa->pa_podule->interrupt; 195 for (aa.aa_port = 0; aa.aa_port < MAX_AMPS_PORTS; ++aa.aa_port) { 196 aa.aa_base -= AMPS_PORT_SPACING; 197 config_found_sm(self, &aa, amps_print, NULL); 198 } 199 } 200 201 /* 202 * Card shutdown function 203 * 204 * Called via do_shutdown_hooks() during kernel shutdown. 205 * Clear the cards's interrupt mask to stop any podule interrupts. 206 */ 207 208 /*void 209 amps_shutdown(arg) 210 void *arg; 211 { 212 }*/ 213 214 /* 215 * Atomwide Multi-Port Serial probe and attach code for the com device. 216 * 217 * This provides a different pair of probe and attach functions 218 * for attaching the com device (dev/ic/com.c) to the Atomwide serial card. 219 */ 220 221 struct com_amps_softc { 222 struct com_softc sc_com; /* real "com" softc */ 223 void *sc_ih; /* interrupt handler */ 224 struct evcnt sc_intrcnt; /* interrupt count */ 225 }; 226 227 /* Prototypes for functions */ 228 229 static int com_amps_probe __P((struct device *, struct cfdata *, void *)); 230 static void com_amps_attach __P((struct device *, struct device *, void *)); 231 232 /* device attach structure */ 233 234 struct cfattach com_amps_ca = { 235 sizeof(struct com_amps_softc), com_amps_probe, com_amps_attach 236 }; 237 238 /* 239 * Controller probe function 240 * 241 * Map all the required I/O space for this channel, make sure interrupts 242 * are disabled and probe the bus. 243 */ 244 245 int 246 com_amps_probe(parent, cf, aux) 247 struct device *parent; 248 struct cfdata *cf; 249 void *aux; 250 { 251 bus_space_tag_t iot; 252 bus_space_handle_t ioh; 253 int iobase; 254 int rv = 1; 255 struct amps_attach_args *aa = aux; 256 257 iot = aa->aa_iot; 258 iobase = aa->aa_base; 259 260 /* if it's in use as console, it's there. */ 261 if (!com_is_console(iot, iobase, 0)) { 262 if (bus_space_map(iot, iobase, COM_NPORTS, 0, &ioh)) { 263 return 0; 264 } 265 /* 266 * We don't use the generic comprobe1() function as it 267 * is not good enough to identify which ports are present. 268 * 269 * Instead test for the presence of the scratch register 270 */ 271 272 bus_space_write_1(iot, ioh, com_scratch, 0x55); 273 bus_space_write_1(iot, ioh, com_ier, 0); 274 (void)bus_space_read_1(iot, ioh, com_data); 275 if (bus_space_read_1(iot, ioh, com_scratch) != 0x55) 276 rv = 0; 277 bus_space_write_1(iot, ioh, com_scratch, 0xaa); 278 bus_space_write_1(iot, ioh, com_ier, 0); 279 (void)bus_space_read_1(iot, ioh, com_data); 280 if (bus_space_read_1(iot, ioh, com_scratch) != 0xaa) 281 rv = 0; 282 283 bus_space_unmap(iot, ioh, COM_NPORTS); 284 } 285 return (rv); 286 } 287 288 /* 289 * Controller attach function 290 * 291 * Map all the required I/O space for this port and attach the driver 292 * The generic attach will probe and attach any device. 293 * Install an interrupt handler and we are ready to rock. 294 */ 295 296 void 297 com_amps_attach(parent, self, aux) 298 struct device *parent, *self; 299 void *aux; 300 { 301 struct com_amps_softc *asc = (void *)self; 302 struct com_softc *sc = &asc->sc_com; 303 u_int iobase; 304 bus_space_tag_t iot; 305 struct amps_attach_args *aa = aux; 306 307 iot = sc->sc_iot = aa->aa_iot; 308 iobase = sc->sc_iobase = aa->aa_base; 309 310 if (!com_is_console(iot, iobase, &sc->sc_ioh) 311 && bus_space_map(iot, iobase, COM_NPORTS, 0, &sc->sc_ioh)) 312 panic("comattach: io mapping failed"); 313 314 sc->sc_frequency = AMPS_FREQ; 315 com_attach_subr(sc); 316 317 evcnt_attach_dynamic(&asc->sc_intrcnt, EVCNT_TYPE_INTR, NULL, 318 self->dv_xname, "intr"); 319 asc->sc_ih = podulebus_irq_establish(aa->aa_irq, IPL_SERIAL, comintr, 320 sc, &asc->sc_intrcnt); 321 } 322