1# $NetBSD: EB7500ATX,v 1.55 2013/06/30 21:38:55 rmind Exp $ 2# 3# EB7500ATX --- NetBSD/acorn32 complete configuration 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. This generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21include "arch/acorn32/conf/std.acorn32" 22 23options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25#ident "EB7500ATX-$Revision: 1.55 $" 26 27# estimated number of users 28maxusers 32 29 30# Standard system options 31 32options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 33#options NTP # NTP phase/frequency locked loop 34 35# CPU options 36options CPU_ARM7 # Support the ARM7 core 37 38options EB7500ATX # Define in case needed 39 40# File systems 41 42file-system FFS # UFS 43#file-system LFS # log-structured file system 44file-system MFS # memory file system 45file-system NFS # Network file system 46file-system ADOSFS # AmigaDOS-compatible file system 47file-system EXT2FS # second extended file system (linux) 48file-system CD9660 # ISO 9660 + Rock Ridge file system 49file-system MSDOSFS # MS-DOS file system 50file-system FDESC # /dev/fd 51file-system FILECORE # Acorn filecore file system 52file-system KERNFS # /kern 53file-system NULLFS # loopback file system 54file-system OVERLAY # overlay filesystem 55file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs) 56file-system PROCFS # /proc 57file-system UMAPFS # NULLFS + uid and gid remapping 58file-system UNION # union file system 59file-system PTYFS # /dev/pts/N support 60 61# File system options 62options QUOTA # legacy UFS quotas 63options QUOTA2 # new, in-filesystem UFS quotas 64#options FFS_EI # FFS Endian Independent support 65options WAPBL # File system journaling support 66options NFSSERVER 67#options FFS_NO_SNAPSHOT # No FFS snapshot support 68 69# Networking options 70 71options GATEWAY # packet forwarding 72options INET # IP + ICMP + TCP + UDP 73options INET6 # IPV6 74#options IPSEC # IP security 75#options IPSEC_DEBUG # debug for IP security 76#options MROUTING # IP multicast routing 77#options PIM # Protocol Independent Multicast 78options NETATALK # AppleTalk networking 79options PPP_BSDCOMP # BSD-Compress compression support for PPP 80options PPP_DEFLATE # Deflate compression support for PPP 81options PPP_FILTER # Active filter support for PPP (requires bpf) 82#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 83 84#options ALTQ # Manipulate network interfaces' output queues 85#options ALTQ_BLUE # Stochastic Fair Blue 86#options ALTQ_CBQ # Class-Based Queueing 87#options ALTQ_CDNR # Diffserv Traffic Conditioner 88#options ALTQ_FIFOQ # First-In First-Out Queue 89#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 90#options ALTQ_HFSC # Hierarchical Fair Service Curve 91#options ALTQ_LOCALQ # Local queueing discipline 92#options ALTQ_PRIQ # Priority Queueing 93#options ALTQ_RED # Random Early Detection 94#options ALTQ_RIO # RED with IN/OUT 95#options ALTQ_WFQ # Weighted Fair Queueing 96 97# Compatibility options 98 99options COMPAT_43 # 4.3BSD compatibility. 100options COMPAT_40 # NetBSD 4.0 compatibility. 101options COMPAT_30 # NetBSD 3.0 compatibility. 102options COMPAT_20 # NetBSD 2.0 compatibility. 103options COMPAT_16 # NetBSD 1.6 compatibility. 104options COMPAT_15 # NetBSD 1.5 compatibility. 105options COMPAT_14 # NetBSD 1.4 compatibility. 106options COMPAT_13 # NetBSD 1.3 compatibility. 107options COMPAT_12 # NetBSD 1.2 compatibility. 108#options COMPAT_11 # NetBSD 1.1 compatibility. 109#options COMPAT_10 # NetBSD 1.0 compatibility. 110#options COMPAT_09 # NetBSD 0.9 compatibility. 111#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 112options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 113 114# Shared memory options 115 116options SYSVMSG # System V-like message queues 117options SYSVSEM # System V-like semaphores 118#options SEMMNI=10 # number of semaphore identifiers 119#options SEMMNS=60 # number of semaphores in system 120#options SEMUME=10 # max number of undo entries per process 121#options SEMMNU=30 # number of undo structures in system 122options SYSVSHM # System V-like memory sharing 123 124# Device options 125 126options MEMORY_DISK_HOOKS # boottime setup of ramdisk 127#options MEMORY_DISK_ROOT_SIZE=4100 # Size in blocks 128#options MEMORY_DISK_IS_ROOT # use memory disk as root 129 130# Miscellaneous kernel options 131options KTRACE # system call tracing, a la ktrace(1) 132options IRQSTATS # manage IRQ statistics 133options KMEMSTATS # kernel memory statistics 134#options SCSIVERBOSE # Verbose SCSI errors 135options USERCONF # userconf(4) support 136#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 137#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 138options SYMTAB_SPACE=275000 139 140# Enable experimental buffer queue strategy for better responsiveness under 141# high disk I/O load. Use it with caution - it's not proven to be stable yet. 142#options BUFQ_READPRIO 143#options BUFQ_PRIOCSCAN 144 145# Development and Debugging options 146 147#options ARM700BUGTRACK # track the ARM700 swi bug 148#options PORTMASTER # Enable PortMaster only options 149options DIAGNOSTIC # internal consistency checks 150#options PMAP_DEBUG # Enable pmap_debug_level code 151options DDB # in-kernel debugger 152#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 153#makeoptions DEBUG="-g" # compile full symbol table 154 155config netbsd root on ? type ? 156options NFS_BOOT_DHCP 157 158# serial console ... the conaddr is hardcoded as the pioc address + 4*com offset 159# this really be fixed some day 160#options COMCONSOLE,CONADDR="0x210000+4*0x3f8",CONUNIT=0,CONSPEED=9600 161 162# The main bus device 163mainbus0 at root 164 165# The boot CPU 166cpu0 at mainbus? 167 168# The IOMD 169iomd0 at mainbus? 170 171# system clock via IOMD 172clock* at iomd? 173 174# IIC bus device 175#iomdiic* at iomd? 176#iic* at iomdiic? 177 178# RTC device via IIC bus 179#pcfrtc* at iic? addr 0x50 180 181# VIDC device 182vidc0 at mainbus? 183 184# WSCONS 185# ws console uses DUMB, SUN or VT100 terminal emulation 186#options WSEMUL_NODUMB 187#options WSEMUL_SUN 188options WSEMUL_VT100 189 190#options WSDISPLAY_COMPAT_RAWKBD 191options WSDISPLAY_COMPAT_USL # wsconscfg VT handling 192 193#options FONT_BOLD8x16 194#options FONT_GALLANT12x22 # Very nice font 195#options FONT_LUCIDA16x29 196#options FONT_OMRON12x20 # looks funny 197#options FONT_QVSS8x15 # broken ? 198options FONT_SONY12x25 # looks like VT220 font 199options FONT_SONY8x16 # not tested 200#options FONT_VT220L8x8 # 8x8 font as in Arch. cons 201#options FONT_VT220L8x16 # 8x(2x8) font as in Arch. cons 202#options FONT_VT220L8x10 # not tested 203#options FONT_VT220L8x20 # not tested 204 205vidcvideo0 at vidc? # wscons driver for VIDC 206wsdisplay* at vidcvideo? console ? # display itself 207 208iomdkbc* at iomd? # IOMD keyboard/mouse interface 209 210pckbd* at iomdkbc? slot ? # PS/2 keyboard 211options PCKBD_LAYOUT=KB_UK 212wskbd* at pckbd? 213 214pms* at iomdkbc? slot ? # PS/2 mouse 215wsmouse* at pms? 216 217#qms* at iomd? # ws quadmouse driver 218#wsmouse* at qms? # wsmouse on ws quadmouse 219 220pseudo-device wsmux 221 222# Audio device 223vidcaudio0 at vidc? 224audio* at vidcaudio0 225 226rsbus0 at mainbus? 227 228wdc* at rsbus? # eb7500atx build in ide 229atabus* at ata? 230wd* at atabus? drive ? 231atapibus* at atapi? 232 233# Builtin cs8920M Network adaptor 234cs* at rsbus? 235 236# Builtin DS1687 clock 237# Not functioning (yet) 238#ds1687rtc* at rsbus? 239 240pseudo-device loop # network loopback 241pseudo-device bpfilter # packet filter 242pseudo-device sl # CSLIP 243pseudo-device ppp # PPP 244pseudo-device pppoe # PPP over Ethernet (RFC 2516) 245pseudo-device tun # network tunneling over tty 246pseudo-device tap # virtual Ethernet 247#pseudo-device gre # generic L3 over IP tunnel 248#pseudo-device ipfilter # ip filter 249pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 250#pseudo-device faith # IPv[46] tcp relay translation i/f 251pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 252#pseudo-device strip # STarmode Radio IP (Metricon Ricochet) 253pseudo-device vlan # IEEE 802.1q encapsulation 254pseudo-device bridge # simple inter-network bridging 255#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 256pseudo-device pty # pseudo-terminals 257pseudo-device vnd # disk-like interface to files 258pseudo-device ccd # concatenated disk devices 259#pseudo-device cgd # cryptographic disk devices 260pseudo-device raid # RAIDframe disk driver 261options RAID_AUTOCONFIG # auto-configuration of RAID components 262# Options to enable various other RAIDframe RAID types. 263# options RF_INCLUDE_EVENODD=1 264# options RF_INCLUDE_RAID5_RS=1 265# options RF_INCLUDE_PARITYLOGGING=1 266# options RF_INCLUDE_CHAINDECLUSTER=1 267# options RF_INCLUDE_INTERDECLUSTER=1 268# options RF_INCLUDE_PARITY_DECLUSTERING=1 269# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 270#pseudo-device fss # file system snapshot device 271pseudo-device md # Ramdisk driver 272pseudo-device clockctl # user control of clock subsystem 273pseudo-device ksyms # /dev/ksyms 274#pseudo-device pf # PF packet filter 275#pseudo-device pflog # PF log if 276pseudo-device putter # for puffs and pud 277 278# If the standard modes don't work for your monitor, you can specify 279# a RISC-OS-format monitor definition file and a list of modes here. 280 281#makeoptions MONITOR="Taxan875+LR" 282#makeoptions MONITOR="AKF60" 283#makeoptions MODES="1024,768,60 1024,768,70 800,600,60 640,480,60 1280,1024 1152,900" 284